NZQA Expiring unit standard
25600 version 3
Page 1 of 2
Title
Make a template for manufacturing a kitchen
Level
3
Purpose
Credits
2
This unit standard is for people working in the area of kitchen
manufacture.
People credited with this unit standard are able to make a
template for manufacturing a kitchen.
Classification
Joinery > Cabinetry
Available grade
Achieved
Explanatory notes
1
References
Cull, D., Kitchens (Auckland: Magenta Publishing Ltd, 2006) available from Joinery
ITO, PO Box 11 435, Wellington 6142;
AS/NZS 4386.1:1996 Domestic kitchen assemblies – Kitchen units, and AS/NZS
4386.2:1996 Domestic kitchen assemblies – Installation, available at
http://www.standards.co.nz.
2
Legislation and regulations that apply to this unit standard include – Health and
Safety in Employment Act 1992, Health and Safety in Employment Regulations 1995.
This unit standard is
Outcomes and evidence requirements
expiring
3
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
Outcome 1
Make a template for manufacturing a kitchen.
Evidence requirements
1.1
Room requirements are identified in terms of their relationship to the agreed
kitchen design.
1.2
Any variances are identified and calculated to ensure final measurements meet
the agreed kitchen design.
1.3
Template is designed and produced in accordance with the agreed kitchen
design both in the workshop and scribed on-site.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
25600 version 3
Page 2 of 2
1.4
Template is cut out in accordance with worksite requirements.
1.5
Template is used to set out kitchen requirements to meet agreed kitchen design
prior to installation.
includes but is not limited to – angles, curves, shapes.
Range
Replacement information
This unit standard, unit standard 2530, and unit standard
25601 have been replaced by unit standard 28216.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
20 March 2009
31 December 2018
Review
2
24 October 2014
31 December 2018
Rollover
3
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
This unit standard is
expiring
Providers and Industry Training Organisations, which have been granted consent and
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016