NZQA Expiring unit standard
Title
3767 version 6
Page 1 of 3
Prepare and apply coatings in the fibreboard packaging industry
2 Credits 3 Level
Purpose People credited with this unit standard are able to: prepare the coating mixture; set up and thread the coating equipment; and operate the coating equipment.
Classification
Available grade
Fibreboard Packaging > Fibreboard Manufacture
Achieved
Entry information
Critical health and safety prerequisites
Unit 340, Demonstrate knowledge of safe working practices in the printing and graphic pre-press industries, or demonstrate equivalent knowledge and skills.
Explanatory notes
1 All workplace practices must meet any applicable and recognised codes of practice, and documented workplace health, safety, and environmental procedures for personal, product, workplace health, safety, and environmental matters, and the obligations required under current law including the Health and Safety in Employment
Act 1992, Hazardous Substances and New Organisms Act 1996, Resource
Management Act 1991, Privacy Act 1993 and their subsequent amendments.
2 Workplace practices refer to the documented procedures for the machine and/or workplace.
Outcome 1
Prepare the coating mixture.
Evidence requirements
1.1 The coating selected meets the requirements of the job.
1.2 Coating condition is checked prior to application in accordance with workplace practices.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020 New Zealand Qualifications Aut

NZQA Expiring unit standard
Range
3767 version 6
Page 2 of 3 evenness of consistency, viscosity within tolerance limits.
Outcome 2
Set up and thread the coating equipment.
Evidence requirements
2.1 The coating equipment is set up in accordance with workplace practices.
Range position, foreign matter, fastened securely.
2.2 The paper to be coated is threaded in accordance with workplace practices.
Outcome 3
Operate the coating equipment.
Evidence requirements
3.1 The coating is transferred to the paper in accordance with workplace practices.
Range free of spills, blockages or interruptions in the coating circulation system; even and smooth coating.
3.2 The coating is applied to meet the production order specifications.
Range paper surface, amount of coating, foreign matter, spillage.
3.3 Board is free from delamination, blocking, and misalignment exceeding 5mm at operator side.
Replacement information This unit standard has been replaced by unit standard
27823.
This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020 New Zealand Qualifications Aut

NZQA Expiring unit standard 3767 version 6
Status information and last date for assessment for superseded versions
Page 3 of 3
Process Version Date Last Date for Assessment
Registration
Revision
1
2
28 April 1995
19 December 1997
31 December 2015
31 December 2015
Revision
Review
3
4
27 March 2001
27 April 2005
31 December 2015
31 December 2015
Review 5 20 September 2012 31 December 2019
Rollover 6 10 December 2015 31 December 2019
Consent and Moderation Requirements (CMR) reference 0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do
.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020 New Zealand Qualifications Aut