NZQA Expiring unit standard
1321 version 8
Page 1 of 3
Title
Apply quilting and fluting to canvas fabrication
Level
3
Credits
3
Purpose
This unit standard is for people who work in the canvas
fabrication and allied industries. People credited with this unit
standard are able to demonstrate knowledge of quilting and
fluting operations, and apply quilting and fluting.
Classification
Outdoor Fabric Products > Canvas Fabrication
Available grade
Achieved
Explanatory notes
The following legislation (and subsequent amendments) is applicable to this unit standard
and must be followed where applicable:
–
Health and Safety in Employment Act 1992.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of quilting and fluting operations in the canvas fabrication and
allied industries.
Evidence requirements
1.1
Quilting and fluting patterns are drawn according to job specifications and
company policy.
1.2
Quilting and fluting allowance calculations are made according to job
specifications and company policy.
1.3
Quilting and fluting fabrics are identified according to manufacturer’s
specifications.
Range
1.4
outer fabric, inner filler, liner, cotton, calico, nylon, polyvinyl
chloride (PVC), polyfoam.
Method for sewing quilt and flute are demonstrated according to company
policy.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1321 version 8
Page 2 of 3
Outcome 2
Apply quilting and fluting in the canvas fabrication and allied industries.
Evidence requirements
2.1
Fabric for product is selected according to job specification and company policy.
2.2
Pattern to be applied is determined from client and/or workplace requirement.
2.3
Fabric is cut to size for the product with quilt flute allowances according to
company policy.
2.4
Pattern is marked out and sewn to line according to company policy.
2.5
Safe working practices are carried out throughout the task.
Range
personal safety; safety of other people; workshop safety; tool,
equipment, and machine safety.
Replacement information
This unit standard and unit standard 8302 have been
replaced by unit standard 23524 and unit standard
23525.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
3 August 1995
31 December 2016
Revision
2
16 September 1997
31 December 2016
Revision
3
4 November 1997
31 December 2016
Revision
4
28 May 1998
31 December 2016
Review
5
17 August 1999
31 December 2016
Review
6
26 March 2007
31 December 2016
Rollover
7
19 November 2010
31 December 2016
Rollover
8
20 November 2015
31 December 2020
Consent and Moderation Requirements (CMR) reference
0014
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1321 version 8
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Conesnt and Moderation Requirements (CMR). The CMR
also includes useful information about special requirements for organisations wishing to
develop education and training programmes, such as minimum qualifications for tutors and
assessors, and special resource requirements.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016