NZQA Expiring unit standard
Title
Stick stock
Level
2
Purpose
27005 version 3
Page 1 of 4
Credits
6
This is an entry level unit standard for people who are
employed in the ‘sticking pens’ at meat processing plants and
who are required to stick stock in accordance with
organisational requirements.
People credited with this unit standard are able to: complete
opening cuts to neck; stick stock to sever blood vessels;
demonstrate knife use; demonstrate team-work; and comply
with organisational and statutory hygiene and safety
requirements.
Classification
Meat Processing > Slaughter and Dressing
Available grade
Achieved
Explanatory notes
1
Normal production speeds apply to the performance of this activity.
2
Legislation relevant to this unit standard includes but is not limited to – Health and
Safety in Employment Act 1992, Animal Products Act 1999, Animal Welfare Act
1999.
3
Resource documents include but are not limited to – Industry Standard 5 Slaughter
and Dressing, available from the New Zealand Food Safety Authority at
http://www.foodsafety.govt.nz/industry/sectors/meat-ostrich-emugame/meatman/is5/index.htm.
4
Definitions
Organisational requirements – instructions to staff on policies and procedures which
are documented in memo, electronic or manual format and are available in the
workplace.
Operator – the candidate being assessed against this unit standard.
5
Range
Stock may include but are not limited to – cattle, deer, bobby calves, goats, sheep,
lambs.
This unit standard is
expiring
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
27005 version 3
Page 2 of 4
Outcomes and evidence requirements
Outcome 1
Complete opening cuts to neck.
Evidence requirements
1.1
Opening cuts meet company and customer specifications, and statutory
requirements.
1.2
Weasand and trachea are exposed without damage to recoverable skin and
meat.
Outcome 2
Stick stock to sever blood vessels.
Evidence requirements
2.1
Sticking method complies with organisational and statutory requirements.
2.2
Stock are clinically dead.
2.3
Blood flows freely after sticking.
2.4
Weasand is cleared and sealed, in accordance with organisational
requirements, to prevent leakage of ingesta.
2.5
The stun to stick time interval meets organisational and statutory requirements.
This unit standard is
Evidence requirements
expiring
Outcome 3
Demonstrate knife use.
3.1
Knife cuts are clean and straight and made without excessive force or
unnecessary duplication.
3.2
Operator balance is maintained and body weight used to best effect at all times
during knife use.
3.3
Operator reach and follow-through maintain balance and reduce risk of injury to
operator and others.
3.4
Cuts are made away from or to the side of the operator's body and free hand.
3.5
Hands, protective gloves, and knife handles are kept in clean and slip free
condition in accordance with organisational requirements.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
27005 version 3
Page 3 of 4
3.6
Cuts do not damage or contaminate recoverable products in accordance with
organisational requirements.
3.7
Knives are maintained in sharp and sterile condition in accordance with
organisational requirements.
3.8
Knives are replaced in pouch when not in use in accordance with organisational
requirements.
3.9
Steels are used to meet organisational requirements.
3.10
Actions likely to place the operator and others at risk of injury during knife use
and sharpening are avoided.
Outcome 4
Demonstrate team-work.
Evidence requirements
4.1
Tasks are completed within the time and space allocation determined by
product flow and organisational requirements.
4.2
The quality and completeness of tasks meet the operational requirements of
following co-workers.
4.3
Communication and feedback are provided to and requested from co-workers to
maintain and improve task and product quality.
4.4
Co-workers are not endangered through the operator’s methods and
equipment.
4.5
Co-worker assistance is provided within the confines of product flow and
operator space.
4.6
4.7
This unit standard is
Machinery, equipment, and
facility malfunctions are identified and reported to
expiring
supervisory staff in accordance with organisational requirements.
Conflict resolution techniques are applied to minimise interpersonal differences
with co-workers which may adversely affect team performance.
Outcome 5
Comply with organisational and statutory hygiene and safety requirements.
Evidence requirements
5.1
Company supplied clothing, and hygiene and safety equipment are worn and
used in accordance with organisational and statutory requirements.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
27005 version 3
Page 4 of 4
5.2
Work methods comply with specified organisational and statutory requirements
to minimise the risk of product contamination and injuries to the operator and
others.
5.3
Contaminated meat products, surfaces, machinery and equipment are handled
in accordance with organisational and statutory requirements.
5.4
Unsafe and unhygienic conditions are identified and reported to supervisory
staff in accordance with organisational requirements.
5.5
Equipment, operator and work area cleanliness complies with organisational
and statutory requirements.
Replacement information
This unit standard and unit standard 16463 have been
replaced by unit standard 28179.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
21 July 2011
31 December 2016
Review
2
27 January 2015
31 December 2016
Rollover
3
17 September 2015
31 December 2018
This unit standard is
Please note
expiring
Providers must be granted consent to assess against standards (accredited) by NZQA,
Consent and Moderation Requirements (CMR) reference
0033
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016