NZQA registered unit standard
26290 version 3
Page 1 of 3
Title
Demonstrate knowledge of Meat Industry Agreed Standard 2 – Design
and Construction
Level
4
Purpose
Credits
10
This unit standard is for supervisors and compliance staff who
are employed in a meat processing operation and who are
required to have an in-depth knowledge of the design and
construction of meat industry facilities.
People credited with this unit standard are able to demonstrate
knowledge of: MIS 2 and design and construction requirements
for a meat processing operation, and analyse the outcomes of
non-compliance with MIS 2.
Classification
Meat Processing > Meat Quality
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to – Animal
Products Act 1999.
2
Resource documents include but are not limited to – Industry Agreed Standard 2 –
Design and Construction, available from the Ministry for Primary Industries at
http://www.foodsafety.govt.nz/industry/sectors/meat-ostrich-emugame/meatman/manual-2v/index.htm.
3
Definitions
Organisational requirements – instructions to staff on policies and procedures that
are documented in memo, electronic, or manual format and available in the
workplace.
MIS 2 – Industry Agreed Standard 2 – Design and Construction.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of MIS 2 and design and construction requirements for a meat
processing operation.
Evidence requirements
1.1
MIS 2 is described in terms of purpose in a meat processing operation.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
1.2
Design and construction requirements are described in terms of components.
components include but are not limited to – stockyards, edible and
inedible processing areas, environs.
Range
1.3
26290 version 3
Page 2 of 3
The technical reasons for MIS 2 are described in terms of construction
requirements.
construction requirements include but are not limited to – site,
sanitary design, building construction, building services,
equipment, amenities, animal holding facilities, slaughter and
dressing facilities, refrigeration facilities, specific processing
facilities, food support facilities, stores, custom killing premises
and rural slaughterhouses, game depots, by-product facilities and
mobile premises.
Range
Outcome 2
Demonstrate knowledge of the outcomes of non-compliance with MIS 2.
Evidence requirements
2.1
Non-compliance with MIS 2 is analysed in terms of its impact and
consequences on the product.
2.2
Corrective and preventative actions are formulated to meet MIS 2 requirements
and in accordance with organisational requirements.
Replacement information
This unit standard replaced unit standard 17681 and unit
standard 19451.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
19 March 2010
31 December 2018
Review
2
27 January 2015
N/A
Revision
3
17 September 2015
N/A
Consent and Moderation Requirements (CMR) reference
0033
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
26290 version 3
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Primary Industry Training Organisation standards@primaryito.ac.nz if
you wish to suggest changes to the content of this unit standard.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016