9932 version 4
Page 1 of 3
Install interior boat cabinetry
Level
4
Credits
10
Purpose
People credited with this unit standard are able to: prepare for installation of
interior boat cabinetry; carry out the installation; and test the installation
against specifications.
Subfield
Boating Industries
Domain
Boatbuilding
Status
Registered
Status date
7 May 1997
Date version published
20 March 2009
Planned review date
31 December 2012
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
The credit value of this unit standard has been calculated on the basis that people
seeking credit have acquired knowledge and skills in plan reading, measuring,
marking off, and the use of tools.
2
This unit standard does not cover the manufacture of cabinetry.
3
Evidence of the elements of this unit standard must be presented across the
following contexts:
a Cabinetry includes but is not limited to – bunks, lockers, doors, cupboards, drawer
suites, louvres, galleys, stairs, handrails, companionways, internal hatches,
fiddles, tables, chairs, gimballed stove surrounds.
Evidence is required for a drawer suite plus two fixed items, plus one removable
item.
b Substrates – timber, fibre-reinforced composites (FRC), aluminium, and steel.
 New Zealand Qualifications Authority 2016
9932 version 4
Page 2 of 3
4
The following apply to the performance of all elements of this unit standard:
a All required equipment must be set up, started up, operated, and shut down in
accordance with company procedures.
b All work practices must meet recognised codes of practice and documented
worksite health and safety procedures (where these exceed code) for personal,
product, and worksite health and safety, and must meet the obligations required
under the Health and Safety in Employment Act 1992, and subsequent and
delegated legislation.
c All work practices must meet recognised codes of practice and documented
worksite environmental procedures (where these exceed code) for personal,
product, and worksite environmental matters, and must meet the obligations
required under the Resource Management Act 1991, and subsequent and
delegated legislation.
d All work practices must meet documented worksite quality management
requirements. These include documentation of activities, events, and decisions.
5
This unit standard can be assessed on job.
Elements and performance criteria
Element 1
Prepare for installation of interior boat cabinetry.
Performance criteria
1.1
Selected fastenings and sealants are compatible with hardware and substrate
materials, and meet job requirements for durability and appearance.
1.2
Installation position is located in accordance with job requirements.
1.3
Position is checked for not compromising the boat’s structural integrity, and as
being suitable for installation as defined by cabinetry manufacturer’s
specifications and instructions.
1.4
Where a departure from the intended installation position is required, the
situation is reported in accordance with company procedures.
Range
1.5
examples of departures include the requirement to change the
location, and the provision of additional strengthening or hardware.
Surfaces are prepared in accordance with job requirements and cabinetry
manufacturer’s specifications and instructions.
Range
cutting, grinding, removing peel ply, cleaning, coating.
 New Zealand Qualifications Authority 2016
9932 version 4
Page 3 of 3
Element 2
Carry out the installation.
Performance criteria
2.1
Opening and frame sizes are checked for accuracy in accordance with job
requirements and specifications.
2.2
Cabinetry units are attached to the boat structure in accordance with job
requirements and specifications.
2.3
Water proofing is installed to job requirements and specifications.
Range
covings, coatings, gaskets, seals, adhesives.
Element 3
Test the installation against specifications.
Performance criteria
3.1
Completed installation provides a watertight contact between the cabinetry and
the boat structure.
3.2
Completed installation does not interfere with boat systems, or weaken the
boat’s structure.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016