DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange
suitable for downlighting and accent applications. Utilizes T6 G12 metal halide
lamps in 1 - 6 light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing, Plaster Frame: 14 gauge CRS.
Trim assembly: 18 gauge CRS, J-Box
Assembly: 16 gauge CRS (galvanized).
One piece plasterframe construction
for added stability. Fixture utilizes a
removable trim sleeve to provide a 0.75”
(19mm) flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” (13mm) to 1.00”
(25mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame
with easy below-ceiling access. Wiring
is passed through fixture using flexible,
conduit.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical accessible through
ceiling opening.
Lamps
One, two, three, four, five, or six T6 CMH
CMH lamps mounted in standard yokes.
Lamp can accept optical accessories. 380º
x 45º locking lamp adjustment. Includes
G12 base sockets. Lamps not included.
Includes aluminum reflector in narrow,
medium, or wide distribution.
Dimensions in inches / mm
Config.
A
B
D
C
26.39” 8.40” 8.53” 10.45” 10.35”
670
213
217
265
263
CO2
35.13” 16.99” 8.53” 10.45” 10.35”
892
432
217
265
263
CO3
43.83” 25.84” 8.53” 10.45” 10.35”
1113 656
217
265
263
CO4
57.73” 34.74” 8.53” 10.45” 10.35”
1466 882
217
265
263
CO5
66.59” 43.59” 8.53” 10.45” 10.35”
1691 1107 217
265
263
CO6
75.48” 52.49” 8.53” 10.45” 10.35”
1917 1333 217
265
263
COX
40.73” 17.50” 17.38” 20.25” 10.35”
1034 445
441
514
263
COMBOLIGHT®
CO SERIES
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Recessed Multi-Lamp
Fixture
1, 2, 3, 4, 5, or 6 Light
T6 G12 CMH
Ceiling Cut-Outs
CO1 = 9.44” x 9.85”
CO2 = 9.44” x 18.44”
CO3 = 9.44” x 27.29”
CO4 = 9.44” x 36.19”
CO5 = 9.44” x 45.04”
CO6 = 9.44” x 53.94”
COX = 18.37” x 18.46”
D
E
CO1
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers.
New Construction
Recessed Housing
w/ 0.75” (19mm) trim
A
Metal Halide
Ballasts
E
380º x 45º
locking adjustment
B
Trim
Detail
8.75”
8.75”
222mm
222mm
Thermal
Protector
C
T6 G12 Lamp with Reflectors
This fixture utilizes T6 Metal Halide lamps and includes high-performance
clear aluminum reflectors in narrow, medium, or wide distributions.
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
Housing
N = New Construction
E
Lamp Type / Wattage / Reflector
070T6N = 70W T6 G12 CMH Narrow
070T6M = 70W T6 G12 CMH Medium
070T6W = 70W T6 G12 CMH Wide
100T6N = 100W T6 G12 CMH Narrow*
100T6M = 100W T6 G12 CMH Medium*
100T6W = 100W T6 G12 CMH Wide*
Power Supply
E = Electronic Metal
Halide Ballast
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
S = Retractable Double
Gimbal
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
W = White
B = Black
S = Industrial
Silver
*Up to four lamps only
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
rev 073010