DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable
for downlighting and accent applications. Utilizes PAR20 Metal Halide
lamps.
Catalog #
Type
Project
Comments
For new construction applications. Insulation must be kept 3” from all
sides and at least 1” above the housing.
Date
Prepared by
SPECIFICATION FEATURES
Housing
All steel construction. Housing includes
perforated mesh bottom surface for trimless
installation in drywall/plaster ceilings by
allowing the ceiling’s mudding compound
to be applied right up to the edge of the
fixture opening. Includes beveled “knifeedge” lip to ensure a clean edge. Housings
can accommodate 0.50” or 0.625” ceiling
thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
Junction Box
Junction box is UL listed for through branch
wiring, (access above ceiling not required)
for 8 #12, 90°C supply conductors. J-Box
integrated with housing and is accessible
through the ceiling opening.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical are accessible
through removable doors on the housing
sidewall.
Lamps
One, two, three, four, five, or six PAR20
Metal Halide lamps mounted in adjustable
bezels. Each lamp can accept up to two
optical accessories. Special LV style
lampholder with 380º x 45º locking lamp
adjustment. Locking horizontal positional
adjustment can be achieved for added
versatility and aiming. Medium base sockets
pre-wired in housing.
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
COMBOLIGHT®
LV SERIES
Recessed Multi-Lamp
Fixture
Ceiling Cut-Outs
CV1 = 8.00” x 8.00”
CV2 = 8.00” x 13.00”
CV3 = 8.00” x 18.00”
CV4 = 8.00” x 23.00”
CV5 = 8.00” x 28.00”
CV6 = 8.00” x 33.00”
CVX = 13.00” x 13.00”
1, 2, 3, 4, 5, or 6 Light
PAR20 Metal Halide
New Construction
Trimless Housing
Mounting
Butterfly Brackets accept 1/2” EMT, C
Channel, Tbar fasteners, and bar hangers.
Four tabs on housing for securing to
structure.
E
A
7.05”
179mm
Config.
CV1
B
F
Dimensions in inches / mm
C
A
B
C
D
E
F
14.00” 11.04” 5.00” 5.00” 13.18” 11.54”
356
280
127
127
335
293
CV2
19.00” 16.04” 10.00” 5.00” 13.18” 11.54”
483
407
254
127
335
293
CV3
24.00” 21.14” 15.00” 5.00” 13.18” 11.54”
609
537
381
127
335
293
CV4
29.00” 26.21” 20.00” 5.00” 13.18” 11.54”
737
666
508
127
335
293
CV5
34.00” 31.33” 25.00” 5.00” 13.18” 11.54”
867
796
635
127
335
293
CV6
39.00” 36.48” 30.00” 5.00” 13.18” 11.54”
991
927
762
127
335
293
CVX
19.00” 16.13” 10.00” 10.00” 19.42” 16.13”
483
410
254
254
493
410
5.00”
127mm
Trimless Installation
D
380º x 45º Adjust +
Horizontal Travel
Thermal
Protector
Integral Metal Halide Ballasts
ORDERING INFORMATION
N
Configuration
CV1 = One (1) Light
CV2 = Two (2) Light
CV3 = Three (3) Light
CV4 = Four (4) Light
CV5 = Five (5) Light
CV6 = Six (6) Light
CVX = Four (4) Light Sq.
www.cooperlighting.com
E
Housing
N = New Construction
Lamp Type / Wattage Label
020M20 = 20 Watt PAR20MH
039M20 = 39 Watt PAR20MH
Power Supply
E = Electronic Metal Halide
Ballasts
N
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240V
Housing Interior Finish
W = White
B = Black
S = Industrial Silver
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Style
N = Trimless
rev 111910