PORTFOLIO TM
D ES C R IPTION
Low brightness 7-3/8-inch aperture wall wash for use with a 26W, 32W
or 42W Triple Twin Tube 4-pin compact fluorescent lamp. The geometric
stepped reflector maximizes flux towards the wall and is spectrally
neutral leaving the color temperature and the color rendering of the
source unchanged. It is available in single and double wall wash versions.
The one piece design eliminates light leaks at the ceiling. Standard
features include low iridescent finish on all reflectors, electronic ballast
and venting to ensure maximum lamp life and lumen output. Optics
offer unparalleled performance with uniform illuminance on wall with
no flashback. Open downlight, lensed and open wall wash trims are
interchangeable within the same housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
Hous i ng Mountin g Frame
S ock et
Injection molded Geometric
Reflector for Uniform Vertical
Illumination is vacuum metallized
with polysiloxane hardcoat
finish. One piece spun parabolic
downlight reflector, .050 thick
aluminum, available in a variety of
Alzak® finishes.
One piece precision die cast
aluminum 1-1/2" deep collar
accommodates varying dimensions
of ceiling materials.
4 pin GX24q-3/4 base with fatigue
free stainless steel lamp spring
ensures positive lamp retention.
Electron ic B allast
Accepts 1/2" EMT, C Channel, T bar
fasteners, and bar hangers. Adjusts
5" vertically from above or below
ceiling.
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Self flanged or molded white trim
ring. Rimless or metal trim ring
accessories available.
Condui t F i tti ngs
Labels
Die cast screw tight connectors.
cULus listed, standard damp label.
So c k e t C o n n e c t or
J unc ti on Box
One piece die cast aluminum
connection allows venting for
maximum thermal performance.
Listed for eight #12AWG (four in,
four out) 90°C conductors feed
through branch wiring. 1/2" and
two 3/4" pry outs. Positioned to
allow straight conduit runs. Access
to junction box by removing
reflector.
Trim Ring Options
U ni v e rs a l Moun ting B racket
C7142
7111/7110
7221/7220
26W, 32W, 42W
TTT or PLT
Compact Fluorescent
STEPREPEAT>
7-Inch Open Wall Wash
T o p V i ew
WALL
ENERGY DATA
26W TTT 4-pin
Ballast: Electronic
8"
[203mm]
13-5/16"
[338mm]
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 29
Line Amps: 0.10
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (15°F)
14"
[355mm]
Sound Rating: Class A Standards
32W TTT 4-pin
Ballast: Electronic
120V Input Watts: 34.5
Line Amps: 0.30
277V Input Watts: 34.5
Line Amps: 0.13
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (15°F)
20"
[508mm]
Sound Rating: Class A Standards
42W TTT 4-pin
7-3/8" [187mm]
17-5/8" [448mm]
With EM Optio n
8-1/8" [204mm]
8-3/4" [222mm]
Ballast: Electronic
120V Input Watts: 48
Line Amps: 0.32
277V Input Watts: 48
Line Amps: 0.18
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°F (0°C)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP012175
2013-09-27 16:00:00
C7142 7111/7110 7221/7220
OR D ER IN G INFOR M A TION
EXAMPLES: C7142E 7111WMH
Housing
Number of Lamps
C7=7"
Horizontal Lamp
1=1 Lamp
E=120/277V 50/60 Hz
Electronic
3E=347V 50/60 Hz Electronic
D5LT26=26W 120-277V Fifth
Light (DALI Dimming)
D5LT32=32W 120-277V Fifth
Light (DALI Dimming)
D5LT42=42W 120-277V Fifth
Light (DALI Dimming)
Ballast
Wa tt a g e
Tri m s
Options
42=26W, 32W, 42W
TTT or PLT Lamp
3D5LT26/32=26 or 32W 347V Fifth Light (DALI
Dimming)
3D5LT42=42W 347V Fifth Light (DALI Dimming)
D26/32=26W 120-277V Lutron Ecosystem
Dimming
D42=42W 120-277V Lutron Ecosystem Dimming
EDR26=DeRated Wattage Label, 26W
EDR32=DeRated Wattage Label, 32W
CP=Chicago Plenum
EM=Emergency
Module
with RemoteTest
Switch
7111=Single
WW, Self
Flanged
7110=Single
WW, Molded
Trim Ring
7121=Double
WW, Self
Flanged
7120=Double
WW, Molded
Trim Ring
Finish
Options
A c c e s s o ri e s
LI=Low
Iridescent Clear
H=Haze
WMH=Warm
Haze
G=Gold
WH=Wheat
W=Gloss White
GP=Graphite
GPH=Graphite
Haze
WF=White
painted
Flange (self
Flanged only)
HB26=C Channel Bar
Hangers, 26" Long,
Pair
HB50=C Channel Bar
Hangers, 50" Long,
Pair
TRM7=Metal Trim
Ring, Specify Finish 1
TRR7=Rimless Trim
Ring, White 1
FK5=5 Amp Field
Installable Fuse Kit
300V Max
RMB-22=Wood Joist
Bar Hanger, 22" Long,
Pair
Notes: 1 Order trim with polymer trim ring
(Consult specification sheet for ordering information and options).
PHOTOM ETR IC S
C7142 7111/7110, 7221/7220
Candlepower Distribution
Test No. H23200
C7132-7110LI
Open Wall Wash
Lamp=32W PLT
Lumens=2400
150
300
450
Efficiency=64.8%
600
750
0°
180°
900
2'6" Distance From Wall
DD
627
Deg.
45
0°
Wall
23483
CD/SQ M
180°
Dwnlt
18815
639
659
55
16802
17017
15
25
676
667
756
796
65
11990
429
75
8352
478
35
588
759
85
7699
458
45
55
458
266
367
269
65
140
5
75
60
3
85
19
1
90
0
0
Deg.
0°
Wall
180°
Dwnlt
0
627
5
Single Fixture 2'6" From Wall
Distance From Fixture Along Wall
1'
2'
3'
4'
5'
6'
14
26
22
9
20
19
4
9
12
2
3
6
1
1
2
0
0
1
o
0
0
15
10
13
9
10
7
6
5
3
3
2
2
1
1
6
6
5
4
3
2
1
8
4
3
4
3
4
3
3
2
2
2
2
2
1
1
9
2
2
2
2
2
1
0
10
2
2
2
1
1
1
1
DD
1
2
3
4
5
6
7
3' Distance From Wall
4' Distance From Wall
Spacing Between Fixtures
Spacing Between Fixtures
–––––– 3' ––––––
–––––– 4' ––––––
DD
17
13
17
15
8
15
3
32
35
30
33
32
35
28
26
18
24
28
26
4
28
33
28
22
22
5
22
21
22
16
17
6
15
16
15
13
7
8
11
12
11
9
9
7
9
7
9
7
10
5
5
5
1
2
Average
Luminance
Candlepower
–––––– 3' ––––––
Spacing Between Fixtures
–––––– 4' ––––––
DD
11
10
11
8
7
8
3
22
30
20
28
22
30
18
22
14
21
18
22
22
4
25
27
25
20
20
16
5
22
22
22
17
18
12
13
6
16
17
16
14
10
10
10
13
12
8
6
7
6
7
8
12
7
6
9
10
8
10
8
10
8
5
5
5
10
6
6
6
1
2
–––––– 4' ––––––
–––––– 6' ––––––
5
4
5
4
2
4
3
10
14
9
14
10
14
8
11
5
7
8
11
20
4
17
16
17
12
10
12
17
5
15
16
15
11
10
11
13
14
6
14
14
14
10
9
10
11
11
11
11
12
8
8
8
9
7
8
6
7
8
12
8
6
9
9
7
10
8
9
7
7
6
7
6
7
6
5
5
5
10
6
6
6
5
5
5
1
2
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP012175
2013-09-27 16:00:00
C7142 7111/7110 7221/7220
C7142 7111/7110, 7221/7220
Candlepower Distribution
Test No. H23234
C7142-7110LI
Open Wall Wash
Lamp=42W PLT
Lumens=3200
200
400
Efficiency=58.5%
600
Average
Luminance
Candlepower
800
0°
180°
1000
2'6" Distance From Wall
Deg.
0
0°
Wall
641
180°
Dwnlt
641
5
15
676
782
691
795
25
815
879
35
45
706
547
892
522
55
65
317
168
294
12
75
56
4
85
7
1
90
0
0
–––––– 3' ––––––
–––––– 4' ––––––
DD
18
39
17
34
8
21
17
34
1
2
14
34
3
42
40
42
31
31
4
5
34
35
34
27
27
26
19
26
20
26
19
21
16
20
15
21
16
14
10
14
11
14
10
12
9
12
9
12
9
8
8
8
7
7
7
8
9
6
6
6
5
6
5
10
6
7
8
9
10
45
55
28048
20071
26766
18560
65
14384
1004
75
7862
617
85
3080
375
Single Fixture 2'6" From Wall
Distance From Fixture Along Wall
1'
2'
3'
4'
5'
6'
2
16
31
10
23
4
10
1
4
0
1
0
1
0
0
3
26
23
15
8
2
1
0
4
18
12
16
11
12
9
8
7
5
4
2
3
1
1
7
7
6
5
4
3
2
5
5
4
4
3
2
2
3
2
3
2
3
2
3
2
2
2
2
2
2
1
2
2
2
2
1
1
1
DD
1
5
6
7
8
9
10
4' Distance From Wall
Spacing Between Fixtures
18
39
1
CD/SQ M
180°
Dwnlt
3' Distance From Wall
Spacing Between Fixtures
DD
Deg.
0°
Wall
–––––– 3' ––––––
Spacing Between Fixtures
–––––– 4' ––––––
DD
9
25
11
26
9
22
6
17
9
22
1
2
11
26
31
3
34
35
34
26
27
27
4
5
32
33
32
25
21
27
21
27
21
27
21
21
17
21
17
21
17
15
12
16
12
15
12
13
10
13
10
13
10
9
9
9
8
8
8
8
9
7
7
7
6
6
6
10
6
7
–––––– 6' ––––––
2
4
11
3
10
4
11
3
9
26
3
16
16
16
25
4
5
19
20
19
19
16
19
17
14
12
6
7
2
5
3
9
13
9
13
14
13
14
19
16
13
12
12
11
13
12
14
12
14
12
10
9
10
8
10
9
9
10
9
7
7
7
7
8
7
6
6
6
Distance
From Wall
Notes:
• Illuminance values for multiple fixtures are based upon the center two units of a four unit array. Footcandle values are
centerline of fixtures and centered between fixtures.
• Illuminance values are cosine corrected initial values with no contribution from inter reflections from other room
surfaces. Total illumination may increase from contributions from other surfaces.
–––––– 4' ––––––
Spacing Between
Fixtures
DD=Distance Down
From Ceiling
• Changing fixture spacing will affect illuminance level.
New Fc=
Existing Spacing x Average Table Fc Level
New Spacing
• W
hen selecting colored cones option, only downlight cone is colored; the wall wash reflector is specular clear. This
allows the color (CRI, °K) of the light source to be unaffected and maximizes lumen output.
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
CL
ADP012175
2013-09-27 16:00:00