PORTFOLIO

advertisement
PORTFOLIO TM
D ES C R IPTION
Low brightness 7-3/8-inch aperture crossblade for use with (2)26W,
32W, or 42W Triple Tube compact fluorescent lamps. The crossblade
reflector provides superior sheilding. Reflector trim eliminates brightness
at higher angles. Standard features include low iridescent finish on all
reflectors, and one electronic ballast to operate (2)26/32/42W triple lamps.
Venting ensures maximum lamp life and lumen output. Open downlight,
lensed, and open wall wash trims are interchangeable within the same
housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
Hous i ng Mountin g Frame
S ock et R otary Lock
Specular clear upper Alzak®
reflector for maximum output.
Positive reflector mounting,
without tools, pulls trim tight to
ceiling. Option 5: Lower spun
parabolic reflector with 90°
crossblades, .050 thick aluminum
available in a variety of Alzak®
finishes. Option 6: Lower spun
parabolic reflector painted white
with 90° perforated crossblades,
.050 thick aluminum, painted gray.
One piece precision die cast
aluminum 1-1/2" deep collar
accommodates varying dimensions
of ceiling materials.
4 pin GX24q3/4 base with fatigue
free stainless steel lamp spring
ensures positive lamp retention.
Electron ic B allast
Accepts 1/2" EMT, C Channel, T bar
fasteners, and bar hangers. Adjusts
5" vertically from above or below
ceiling.
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Condui t F i tti ngs
Labels
Die cast screw tight connectors.
cULus listed Damp label.
U ni v e rs a l Moun ting B racket
C7242
7381
Trim Ring Options
Self flanged trim ring.
So c k e t C o n n e c t or
One piece die cast aluminum
connection allows venting for
maximum thermal performance.
J unc ti on Box
Listed for eight #12AWG (four in,
four out) 90°C conductors feed
through branch wiring. For 1/2"
and two 3/4" pry outs. Positioned to
allow straight conduit runs. Access
to junction box by removing
reflector.
(2) 26W, 32W, 42W
TTT or PLT
Compact Fluorescent
STEPREPEAT>
7-Inch Crossblade
ENERGY DATA
Top View
42W TTT 4-pin
Ballast: Electronic
8"
[203mm]
CP
8"
[203mm]
13-13/32"
[341mm]
120V Input Watts: 48
Line Amps: 0.32
277V Input Watts: 48
Line Amps: 0.18
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°F (0°C)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
15-3/8"
[391mm]
20"
[508mm]
7-3/8" [187mm]
17-5/8"
[448mm]
8-1/8" [204mm]
8-3/4" [222mm]
Louver Option 6
Louver Option 5
Louver Plan View
With EM Option
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP051142
2013-09-25 16:12:33
C7242 7381
OR D ER IN G INFOR M A TION
EXAMPLE: C7242E 7381LI5
Housing
Number of Lamps
C7=7"
Horizontal Lamp
2=2 Lamps
E=120/277V 50/60 Hz Electronic
3E=347V 50/60 Hz Electronic
D5LT26=26W 120-277V Fifth
Light (DALI Dimming)
D5LT32=32W 120-277V Fifth
Light (DALI Dimming)
D5LT42=42W 120-277V Fifth
Light (DALI Dimming)
Wa tt a ge
Ballast
42=26W, 32W, 42W
TTT or PLT Lamp
Options
CP=Chicago Plenum
EM=Emergency
Module with
RemoteTest Switch
3D5LT26/32=26 or 32W 47V Fifth Light (DALI
2C=(2) ballasts for
Dimming)
3D5LT42=42W 347V Fifth Light (DALI) Dimming Hi-Low Switching
D26/32=26 or 32W 120-277V Lutron Ecosystem 2CMS=2 Circuit
Master Satellite (2
Dimming
D42=42W 120-277V Lutron Ecosystem Dimming housings, order 2
trims)
EDR26=DeRated Wattage Label, 26W
EDR32=DeRated Wattage Label, 32W
Tri m s
7381=SelfFlanged
Finish
LI=Low
Iridescent
Clear
W=Gloss
White
Louver
5=Blade (LI or W
Matching Blade
Finish)
6=Perforated
Blade (Lt Grey
Blades, W Finish
only)
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Options
A c c e s s o ri e s
WF=White
painted
Flange (self
Flanged only)
HB26=C Channel Bar
Hangers, 26" Long,
Pair
HB50=C Channel Bar
Hangers, 50" Long,
Pair
FK5=5 Amp Field
Installable Fuse Kit
300V Max
RMB-22=Wood Joist
Bar Hanger, 22" Long,
Pair
ADP051142
2013-09-25 16:12:33
Download