PORTFOLIO TM
D ES C R IPTION
Low brightness 8-3/8-inch aperture downlight for use with 26W, 32W, or
42W Triple Twin Tube 4-pin compact fluorescent lamps. The precisely
formed non-imaging optical reflector ensures 55° cutoff to lamp and
lamp image and the one piece design eliminates light leaks at the
ceiling. Standard features include low iridescent finish on all reflector
colors to eliminate "rainbowing" and one electronic ballast to operate
26/32/42W triple lamps. Venting ensures maximum lamp life and lumen
output. Optics offer unparalleled performance in glare free lighting with
a smooth beam devoid of hot spots. Open downlight, lensed, and open
wall wash trims are interchangeable within the same housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
U ni v e rs a l Moun ting B racket
Electron ic B allast
Available in a variety of Alzak®
finishes, in a one piece spun
parabolic contour. Also available
with white or black baffle. Positive
reflector mounting, without tools,
pulls trim tight to ceiling.
Accepts 1/2" EMT, C Channel, T bar
fasteners, and bar hangers. Adjusts
5" vertically from above or below
ceiling.
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting.
Condui t F i tti ngs
Labels
Die cast screw tight connectors.
cULus listed, standard damp label.
Trim Ring Options
Self flanged or molded white trim
ring.
J unc ti on Box
Listed for eight #12AWG (four in,
four out) 90°C conductors feed
through branch wiring. One 1/2"
and two 3/4" pry outs. Positioned to
allow straight conduit runs. Access
to junction box by removing
reflector.
So c k e t C o n n e c t or
One piece die cast aluminum
connection allows venting for
maximum thermal performance.
C8142
8351/8350
H ou s i n g M o u n t i n g F ra me
One piece precision die cast
aluminum 1-1/2" deep collar
accommodates varying dimensions
of ceiling materials.
Soc ke t Rota ry Lo ck
26W, 32W, 42W
4 pin GX24q3/4 base with fatigue
free stainless steel lamp spring
ensures positive lamp retention.
TTT or PLT
Compact Fluorescent
STEPREPEAT>
8-Inch Open Downlight
ENERGY DATA
26W TTT 4-pin
Top View
7-3/4"
[197mm]
Ballast: Electronic
13-13/32"
[341mm]
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 29
Line Amps: 0.10
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
32W TTT 4-pin
Ballast: Electronic
14" [355mm]
120V Input Watts: 36
Line Amps: 0.32
277V Input Watts: 36
Line Amps: 0.16
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (10°F)
Sound Rating: Class A Standards
20"
[508mm]
8-3/8" [213mm]
9-1/8" [232mm]
9-3/4" [248mm]
17-5/8" [448mm]
* ( w i t h E M O p t i o n)
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
42W TTT 4-pin
Ballast: Electronic
120V Input Watts: 48
Line Amps: 0.32
277V Input Watts: 48
Line Amps: 0.18
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°F (0°C)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
ADP070439
2013-05-09 16:12:33
C8142 8351/8350
OR D ER ING INFOR M A TION
EXAMPLE: C8142E 8351H
Housing
Lamps
C8=8" Horizontal
Lamp
1=1 Lamp
42=26W, 32W,
or 42W TTT or
PLT Lamp
Wa tt a ge
Ballast
E=120/277V 50/60
Hz Electronic
3E=347V 50/60 Hz
Electronic
D5LT26=26W 120-277V
Fifth Light (DALI Dimming)
D5LT32=32W 120-277V
Fifth Light (DALI Dimming)
D5LT42=42W 120-277V
Fifth Light (DALI Dimming)
3D5LT26=26W 347V Fifth
Light (DALI Dimming)
3D5LT32=32W 347V Fifth
Light (DALI Dimming)
3D5LT42=42W 347V Fifth
Light (DALI Dimming)
D26=26W 120-277V Lutron
Ecosystem Dimming
D32=32W 120-277V Lutron
Ecosystem Dimming
D42=42W 120-277V Lutron
EcoSystem dimming
EDR26=DeRated Wattage
Label, 26W
EDR32=DeRated Wattage
Label, 32W
Options
CP=Chicago Plenum
EM=Emergency
Module with remote
test switch
IEM=Emergency
Module with integral
test switch
Tri m s
8351=Self Flanged
8350=Molded Trim
Ring
8351E=Self Flanged
use with IEM
8350E=Molded Trim
Ring, use with IEM
Finish
Option
LI=Low Iridescent Clear
WF=White Painted
H=Haze
Flanged (Self Flanged only)
WMH=Warm Haze
G=Gold
WH=Wheat
W=Gloss White
GP=Graphite
GPH=Graphite Haze
BB=Black Baffle (8350 only)
WB=White Baffle (8350 only)
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Ac c e s s o ri e s
HB26=C Channel Bar
Hangers, 26" Long, Pair
HB50=C Channel Bar
Hangers, 50" Long, Pair
FK5=5 Amp Field Installable
Fuse Kit 300V Max
RMB-22=Wood Joist Bar
Hanger, 22" Long, Pair
ADP070439
2013-05-09 16:12:33