IRIS DESCRIPTION Recessed open downlight luminaire with 5 inch aperture utilizing vertical 26/32W TTT compact fluorescent lamp. Platform is suitable for 2x10 residential or commercial plenum applications. Insulation must be kept 3" from top and sides of housing. Platform + lamp module + optical element combination produces smooth medium beam distribution with excellent light control and low aperture brightness. Modular design can be reconfigured after installation to provide a variety of lamp source and distributions. ® Type Catalog # Project Date Comments Prepared By S P E C I F I C AT I O N F E AT U R E S Frame Galvanized steel plaster frame with integral bar hanger receivers. Setscrews provide positive horizontal locking. Integral gun sights facilitate the use of guide strings or laser lines. Shipped with overspray protector installed. Reflector Spun 0.04" thick aluminum parabolic contour provides smooth medium beam distribution with excellent light control and low aperture brightness and is available in a wide range of specular and semi- specular Alzak® finishes. Housing Steel housing painted matte black for a visually dark interior. Flange Reflector is available self flanged, flange finish follows reflector finish, self flanged also available with painted white flange. Reflector also available with die cast flange in painted white or raw aluminum with protective clear coat. The die cast flange can be removed for field painting and is keyed to maintain proper orientation. Bar Hangers Bar hangers adjust from 8-1/2" to 24" wide; pass thru feature allows shortening without removal. Captive nail penetrates standard and engineered lumber. Mounting flange levels platform with ceiling. Integral clip attached directly to tee-bar. Gaskets Closed cell gaskets achieve restrictive airflow requirements without additional caulking. Flush Mount Option Reflector with die cast flange can be installed flush to finished ceiling surface using option flush mound collar accessory. Trim Retention Retained with two torsion springs holding the flange tightly to the finished ceiling surface and accommodates ceiling thickness with 1/2 -1" thick. Uses PLE5 to adapt to ceilings up to 2" thick. Junction Box Rated for (4) #12 or (6) #14 AWG thru branch, (5) 1/2" trade size pry outs positioned to allow straight conduit runs. Ballast Thermally protected 120V electronic ballast provides program start for full light output and rated lamp life. Multi wattage output for 26 or 32W triple twin tube lamps. Optional Lutron Tu-Wire 32W dimming to 5% relative light levels. Compliance Thermally protected, cULus listed for damp locations and ASTM-E283 AIRTITEtm. EMI/RFI emissions per FCC 47CFR Part 18 consumer limits. PN5 M32T E5T 26/32W Compact Fluorescent Open Downlight 5" Aperture 8-1/2" [216mm] 16-1/2" [419mm] 4-15/16" [126mm] 8-1/2" [216mm] ENERGY DATA M32T 5-1/4" [134mm] 6-1/4" [159mm] 6-3/4" [172mm] Input Voltage 120V Input Power 36W Input Current (Max.) .306 Power Factor .98 T.H.D.: 120V = < 10% M32T Lutron Input Voltage 120V Input Power 36W Input Current (Max.) .33A Power Factor > .95 T.H.D.: 120V = < 20% Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADI121720 2012-12-03 IRIS ® O R D E R I N G I N F O R M AT I O N : C o m p l e t e u n i t c o n s i s t s o f p l a t f o r m , l a m p m o d u l e a n d o p t i c a l e l e m e n t . Example: PN5 + M32T + E5T P l a t fo rm Lamp Module Optical Element PN5 Finishes A c c e s s o ri e s Options E5T PN5 = 5" Aperture Non-IC, AT housing platform M32T = 26/32W CFL, 120V, 60Hz M32TLUTRON = 32W CFL 120V, 60Hz Tu-Wire 5% dimming Alzak® Finishes E5T = 5" aperture downlight reflector C = Specular Clear H = Semi-Specular Clear G = Gold WMH = Warm Haze WH = Wheat WHH = Wheat Haze GP = Graphite GPH = Graphite Haze K = Cognac KH = Cognac Haze CC = Chocolate CCH = Chocolate Haze B = Black [Blank] = Metal trim ring, matte white RAW = Metal trim ring, natural aluminum, clear protective coat SF = Self Flanged SFWF = Self flanged, matte white flange PLE5 = Plaster lip extension, for ceilings up to 2" thick FMC5 = Flush mount collar for 5-inch aperture Painted Finishes MW = Matte white W = Gloss white P H OTO M E T R I C S PN5 M32T E5T PN5-M32T-E5TC Candelas Test No. H36087 Lamp: Lumens: 32W PLT 2400 Cutoff: Spacing: Efficiency: Unit LPW: 50° 1.1 33.7% 22.4 Vertical Angle 90 85 75 65 55 45 35 25 15 5 0 D i s t ri b u t i o n Luminance CD 0 0 0 0 0 134 365 522 605 586 552 Cone of Light cd/m2 0 Degree 85˚ 75˚ 0 65˚ 0 55˚ 0 45˚ 13584 Distance to Illuminated Plane Initial Nadir Footcandles 4'6" 5'6" 6'6" 8'0" 10'0" 12'0" Beam Diameter 5'0" 6'6" 7'6" 9'6" 11'6" 14'0" 29 19 14 9 6 4 0° Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 466 692 803 810 0 810 %Lamp 19.4 28.8 33.4 33.7 0.0 33.7 PN5-M32T-E5TC Ceiling Reflectance Wall Reflectance Room Cavity Ratio 0 1 2 3 4 5 6 7 8 9 10 Candelas Test No. H36107 Lamp: Lumens: 26W PLT 1800 Cutoff: Spacing: Efficiency: Unit LPW: Coefficient of Utilization %Luminaire 57.6 85.5 99.1 100.0 0.0 100.0 50° 1.1 38.7% 23.2 Vertical Angle 90 85 75 65 55 45 35 25 15 5 0 70 50 80% 30 10 50 10 50 10 50 10 0% 0 40 38 37 35 33 31 30 28 27 25 40 37 35 33 31 29 27 25 23 22 40 37 34 31 29 27 25 23 21 20 40 36 33 30 28 25 24 22 20 18 39 37 34 32 30 28 27 25 23 22 39 35 32 30 27 25 24 22 20 18 37 35 33 31 30 28 26 25 23 21 37 34 32 29 27 25 23 22 20 18 36 34 32 31 29 27 26 24 23 21 36 33 31 29 27 25 23 21 20 18 34 32 30 28 26 24 23 21 19 18 24 20 18 17 20 17 20 17 20 17 16 D i s t ri b u t i o n CD 70% Luminance Degree 85˚ 0 0 0 0 0 103 305 460 566 572 540 50% 30% Cone of Light cd/m2 0 75˚ 0 65˚ 0 55˚ 123 45˚ 10406 Distance to Illuminated Plane Initial Nadir Footcandles 4'6" 5'6" 6'6" 8'0" 10'0" 12'0" Beam Diameter 5'0" 6'0" 7'0" 9'0" 11'0" 13'0" 27 18 13 8 5 4 0° Specifications and to change without notice. Coefficien t odimensions f U t i l i z a t subject ion Zonal Lumen Summary Zone 0-30 Lumens 426 %Lamp 23.7 %Luminaire 60.8 Consult your representative for additional options and finishes. 80% 70% Ceiling Reflectance 50 30 10 50 10 Wall Reflectance 70 50% 50 30% 10 50 10 ADI121720 2012-12-03 0% 0 6 7 8 9 10 30 28 27 25 24 27 25 23 22 20 25 23 21 20 18 24 22 20 18 17 27 25 23 22 20 24 22 20 18 17 26 25 23 21 20 23 22 20 18 17 26 24 23 21 20 23 21 20 18 17 P H OTO M E T R I C S IRIS ® PN5 M32T E5T PN5-M32T-E5TC Candelas Test No. H36107 Lamp: Lumens: 26W PLT 1800 Cutoff: Spacing: Efficiency: Unit LPW: 23 21 19 18 16 50° 1.1 38.7% 23.2 Vertical Angle 90 85 75 65 55 45 35 25 15 5 0 D i s t ri b u t i o n Luminance CD 0 0 0 0 0 103 305 460 566 572 540 Cone of Light cd/m2 0 Degree 85˚ 75˚ 0 65˚ 0 55˚ 123 45˚ 10406 Distance to Illuminated Plane Initial Nadir Footcandles 4'6" 5'6" 6'6" 8'0" 10'0" 12'0" Beam Diameter 5'0" 6'0" 7'0" 9'0" 11'0" 13'0" 27 18 13 8 5 4 0° Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 426 616 698 701 0 701 %Lamp 23.7 34.2 38.8 38.9 0.0 38.9 Coefficient of Utilization %Luminaire 60.8 87.9 99.6 100.0 0.0 100.0 Ceiling Reflectance Wall Reflectance Room Cavity Ratio 0 1 2 3 4 5 6 7 8 9 10 70 50 80% 30 10 50 70% 10 50 50% 10 50 30% 10 0% 0 46 44 425 41 39 37 35 33 31 30 28 46 43 41 38 36 34 32 30 28 26 24 46 42 39 36 34 32 30 28 26 24 22 46 42 38 35 33 30 28 26 24 22 21 45 43 40 38 36 33 32 30 28 26 24 45 41 38 35 32 30 28 26 24 22 21 43 41 39 37 35 33 31 29 27 25 24 43 40 37 34 32 30 28 26 24 22 21 41 40 38 36 34 32 30 29 27 25 24 41 39 36 34 32 29 28 26 24 22 20 39 37 35 33 31 29 27 25 23 21 20 Notes and Formulas: Luminance: To convert cd/m2 to footlamberts, multiply by 0.2919 Cone of Light: • Beam diameter is to 50% of maximum footcandles, rounded to the nearest half-foot. • Footcandle values are initial. Apply appropriate light loss factors where necessary. See page 64-65 of catalog. CU Notes/Formulas: • maintained illuminance=lamp lumens x CU x light loss factors room area • total number of luminaires=total room area x maintained illuminance lamp lumens x CU x light loss factors • CU data based on 20% effective floor cavity reflectance. Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADI121720 2012-12-03