COOPER LIGHTING - METALUX
®
DESCRIPTION
The HBE series is an outstanding value for mounting heights greater than
40 feet. The HBE optic has been optimized to provide maximum
performance from T5HO lamps. Optional uplight component is provided
to enable excellent ceiling uniformity. HBE‘s high lumen package allows
the benefits of fluorescent to be applied at high mounting heights that
were traditionally exclusive to H.I.D. The primary benefits include
exceptional color rendering, high system efficacy, 95% lumen
maintenance, long lamp life, instant on/instant re-strike, economical
dimming, and uniform brightness control. Primary applications include
"big box" retail, shopping malls, light industrial, etc.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
C o n s t ru c t i o n
Full body construction is achieved
with channel and end plates, along
w/stiffening brackets and side rails
to help create a strong, clean
finished frame for this luminaire.
Side rails are standard on all HBE
products.
Finish
White enamel finish preceded by a
multistage cleaning cycle, iron
phosphate coating with rust
inhibitor to protect against
contaminants and oxidation.
Optics
Die formed, segmented optical
design optimizes performance
across three distributions. Optical
choices include a narrow
distribution for aisles, medium
distribution for assembly and
loading areas, or wide distribution
for general, open area lighting. An
uplight option is offered to permit
ceiling uniformity and allow for
ample lamp and luminaire heat
dissipation.
E l e c t ri c a l
The HBE comes with a standard
Class "P" electronic ballast and
twist-lock lampholders. UL/cUL
listed for high ambient
environments up to 55°C (131°F)
for all lamp and ballast
combinations when used in open
uplight configurations. Suitable for
damp locations.
Shielding
Door frame and lens assembly is
optional for more demanding
environments.
Options
Integral Occupancy Sensor
available and provides from 600
sq. ft. and up to 1250 sq. ft. of
coverage in a maximum mounting
height of 40' using interchangeable
lens caps provided.
Mounting
The HBE series is ideally suited for
suspension mounting with optional
wire hook and chain set, or cable
mounting. Single monopoint
mounting is also available with
SPM tong hanger.
HBE
SERIES
2 5 " X 4 8 " H I G H - B AY
8 O R 10 T 5 H O L A M P S
High-Bay Efficiency
Fluorescent Luminaire
2-15/32"
[63mm]
25-11/32" [644mm]
E N E R G Y D ATA
D I M E N S I O N TO P V I E W
L A M P C O N F I G U R AT I O N S
8/10 LAMP
8 LAMP
48-7/16" [1230mm]
2-15/32" [63mm]
X=2-1/4"
[57mm]
20-11/32" [517mm]
X
X
X
25-11/32" [644mm]
X
X
24-19/32" [625mm]
Input Watts:
ER Ballast
854 (450), 1054 (566)
X
Luminaire Efficacy Rating
LER = 74 (Narrow Beam)
Catalog Number: HBE-854T5-UPL
10 LAMP
25-11/32"
[644mm]
2-15/32" [63mm]
X=1-7/8"
[48mm]
X
X
X
X
X
25-11/32" [644mm]
X
X
X
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADF091710 pc
2011-03-30 09:41:11
HBE T5HO
P H OTO M E T R I C S
HBE-854T5-N-UNVEBT2-UPL
(2) Electronic Ballasts
(8) F54T5 54W lamps
4400 lumens
Spacing criterion:
(II) 1.3 x mounting
height, (⊥) 1.1 x
mounting height
Efficiency 94.0%
Test Report:
HBE854N-UPL.IES
LER =71
Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $3.38
Candela
Angle
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
Across ⊥
10951
11145
11247
11140
10744
9544
8110
7342
6673
6210
5669
5021
4688
4228
3913
3552
2342
959
9
Along II
45°
10951
10951
10984
11064
10903
11152
10700
11067
10369
10834
9921
10373
9365
9511
8714
8103
7984
6885
7200
6077
6376
5356
5508
4797
4615
4174
3690
3565
2762
3128
1869
2710
1035
2266
326
996
8
12
C o e f fi c i e n t s o f U t i l i z a t i o n
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
Effective floor cavity reflectance
80%
70%
70 50 30 10
70 50 30 10
110
100
91
83
76
70
65
60
56
52
49
110
95
83
73
65
58
52
47
43
40
37
110
91
76
65
56
49
44
39
35
32
29
110
87
71
59
50
43
38
33
30
27
24
107
97
88
80
73
67
62
58
54
51
47
107
93
81
71
63
56
51
46
42
39
36
107
89
75
64
55
48
43
38
35
32
29
107
85
69
58
49
43
37
33
30
27
24
20%
50%
50 30 10
30%
50 30 10
50
101
87
76
67
60
54
48
44
41
37
35
95
83
72
64
57
51
46
42
39
36
33
90
78
68
60
54
49
44
40
37
34
32
101
84
71
61
53
47
42
37
34
31
28
101
82
67
56
48
41
36
32
29
26
24
95
80
68
59
51
45
40
36
33
30
27
Zonal Lumen Summary
Luminance Data
Zone
0-30
0-40
0-60
0-90
0-180
Angle
in Deg
45
55
65
75
85
Lumens
8780
13886
23440
30822
33096
%Lamp
24.9
39.4
66.6
87.6
94.0
%Fixture
26.5
42.0
70.8
93.1
100.0
Average
0-Deg
cd/sm
14024
13226
12025
9946
5152
95
78
64
54
46
40
36
32
28
26
23
Average
45-Deg
cd/sm
11837
11519
11618
14421
15739
10%
30 10
90
76
65
56
49
44
39
35
32
29
27
90
74
62
53
45
39
35
31
28
25
23
0%
0
88
72
60
50
43
37
33
29
26
23
21
Average
90-Deg
cd/sm
12096
12057
13779
18902
15155
Modular F-Bay Power Supply Option
Cooper Lighting’s F-Bay Modular Power Supply option is available for use with all F-Bay products. The modular power supply
allows external fixture access for safe and easy servicing. There is no need to remove lamps or reflectors to disconnect fixture
power with F-Bay Modular Power Supply. Access to the individual fixture’s power supply allows servicing without turning off
all the fixtures, disrupting occupants. F-Bay Modular Power Supply is a time-saver in installation – simply plug & power.
Code Compliance
• UL/cUL Certified for Make/Break
under load (UL2549)
• Meets NEC requirements for
ballast disconnect (NEC 410.73G)
1
• Allows for addition of Occupancy
Sensor without hard connections
2
1. Modular Power Supply Receptacle supplied
mounted into fixture Access Plate
2. Modular Power Cord & Plugs in 120, 277, 347,
& 480V configurations for easy plug & power
into existing supply
No internal fixture
access required for
installation or
disconnecting power
Modular Motion Sensor Option
supplied with Mounting Box and
Modular Power Supply Receptacle
• Receptacles complete with
insulating/dust cap
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADF091710 pc
2011-03-30 09:41:11
HBE T5HO
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: HBE-854T5-N-A-UNV-L5850-EBT2-U
Includes V Hangers for rapid installation(4)
Voltage (1)
UNV=Universal
120/277 Voltage
UNC=Universal 347/480
Voltage
120V=120 Volt
277V=277 Volt
347V=347 Volt
Series
HBE=High Bay
Efficiency
No. of Lamps
8=8 Lamps (6)
10=10 Lamps (6)
Lamp Type
49T5=49W T5HO Lamps (48")
51T5=51W T5HO Lamps (48")
54T5=54W T5HO Lamps (48")
Options
Lamps Installed
L5830=T5 Lamp, 80CRI 3000K
L5835=T5 Lamp, 80CRI 3500K
L5841=T5 Lamp, 80CRI 4100K
L5850=T5 Lamp, 80CRI 5000K
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed (1)
Distribution
N=Narrow Beam (Standard)
M=Medium Beam
W=Wide Beam
Ballast Type
EBT =T5HO Linear Electronic Program Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EHT =T5HO Linear Electronic Program Start
High Ambient.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
Shielding (6)
Blank=None
A=Prismatic Acrylic Lens & Doorframe
WG=Wireguard & Doorframe
CL=Clear Acrylic Lens & Doorframe
A/WG=Acrylic Lens, Wireguard & Doorframe
CL/WG=Clear Lens, Wireguard & Doorframe
(1)
(2)
NOTES: Voltage must be specified when ordered with plugs or emergency ballasts. When ordering MS option, specify as UNV (for 120 or 277V),
(3)
347 or 480V. Requires use of MC or MPC cord accessories, specify voltage for plugs. (4) Can be used in high abuse applications such as gymnasiums. (5) EHT/HT5/HCT5 ballast systems suitable for ambient environments not to exceed 149°F (65°C) in open uplight configurations and less lens
(6)
option. EHT ballast recommended when using lens option on 8 or 10 lamp configurations. (7) Cannot be combined with Modular Power Receptacle
(MP). (8) For MWS with MP, choose MP in fixture logic and then choose MWS accessory such as MDS6
Packaging
Options
U=Unit Pack
Blank=Side Rails (Standard)
PALC=Job Pack
MP=Modular Power
In Carton
Receptacle (Used for all Cord
(3), (8)
PAL=Job Pack
or Cord and Plug options)
UPL=Uplight Apertures on
Out of Carton
Reflector
(7)
MWS=Modular Wiring System
MS=360° or 180° motion sensor installed,
120V through 347V, or 480V (2)
Accessories (order separately)
HBL-SPM=Single Monopoint Hanger w/Hub
RH-1=Retrofit Hanger
FH-1=Fixture Hook
FL-1=Fixture Loop
Y-TOGGLE=Y Mounting Toggle, #2 Cable (Specify
10' or 30', requires 2 per fixture)
HBAYC-CHAIN/SET/U=(2) V-Hook Hangers,
36" Chain Sets w/S-Hooks
MC3=3' Modular Power Cord
MPC3=3' Modular Power Cord & Plug (Specify
Voltage)
MC6=6' Modular Power Cord
MPC6=6' Modular Power Cord & Plug (Specify
Voltage)
MMS=360° or 180° Aisle Motion Sensor with
Modular Power Receptacle (120-277V) (2)
MDS6=6' Modular Power Cord with MWS
27DS18/2G06MP Connector (8)
WG/HBL8-4FT-B=8 Lamp Wireguard w/Clips
S H I P P I N G DATA
Catalog No.
HBE-854T5-A
HBE-1054T5-A
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Wt.
25 lbs.
25 lbs.
ADF091710 pc
2011-03-30 09:41:11