COOPER LIGHTING - METALUX
®
DESCRIPTION
The HBE series is an outstanding value for high mounting height
industrial or retail applications. The HBE optic has been optimized to
provide maximum performance from T8 lamps. Optional uplight
component is provided to enable excellent ceiling uniformity. HBE‘s high
lumen package allows the benefits of fluorescent to be applied at high
mounting heights that were traditionally exclusive to H.I.D. The primary
benefits include exceptional color rendering, high system efficacy, 95%
lumen maintenance, long lamp life, instant on/instant re-strike,
economical dimming, and uniform brightness control. Primary
applications include "big box" retail, shopping malls, light industrial, etc.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
C o n s t ru c t i o n
Full body construction is achieved
with channel and end plates, along
w/stiffening brackets and side rails
to help create a strong, clean
finished frame for this luminaire.
Side rails are standard on all HBE
products.
E l e c t ri c a l
The HBE comes with a standard
Class "P" electronic ballast and
twist-lock lampholders. UL/cUL
listed for high ambient
environments up to 55°C (131°F)
for all lamp and ballast
combinations when used in open
uplight configurations. Suitable for
damp locations.
Finish
White enamel finish preceded by a
multistage cleaning cycle, iron
phosphate coating with rust
inhibitor to protect against
contaminants and oxidation.
Optics
Die formed, segmented optical
design optimizes performance
across three distributions. Optical
choices include a narrow
distribution for aisles, medium
distribution for assembly and
loading areas, or wide distribution
for general, open area lighting. An
uplight option is offered to permit
ceiling uniformity and allow for
ample lamp and luminaire heat
dissipation.
Shielding
Door frame and lens assembly is
optional for more demanding
environments.
Mounting
The HBE series is ideally suited for
suspension mounting with optional
wire hook and chain set, or cable
mounting. Single monopoint
mounting is also available with
SPM tong hanger.
Wa rra n t y
When operated in high ambient
conditions, the HBE is supported
by a 5 yr/55°C and 3 yr/65°C ballast
warranty when used with a high
power factor ballast in open,
uplight configurations. To maximize
your warranty, the HBE should be
ordered with a high power factor
ballast in ambient environments
that typically exceed 40°C (102°F).
Options
Integral Occupancy Sensor
available and provides from 600
sq. ft. and up to 1250 sq. ft. of
coverage in a maximum mounting
height of 40' using interchangeable
lens caps provided.
HBE
SERIES
2 0 " X 4 8 " H I G H - B AY
4 OR 6 T8 LAMPS
High-Bay Efficiency
Fluorescent Luminaire
2-15/32"
[63mm]
20-1/4" [512mm]
L A M P C O N F I G U R AT I O N S
E N E R G Y D ATA
Input Watts:
EB Ballast
632 (169)
EB/Plus Ballast
632 (219)
ER Ballast
632 (169)
ER/Plus Ballast
632 (218)
D I M E N S I O N TO P V I E W
4 LAMP
4/6 LAMP
48-7/16" [1231mm]
2-15/32" [63mm]
X
X=3-1/2"
[89mm]
X
Luminaire Efficacy Rating
LER = 90 (Narrow Beam)
Catalog Number: HBE-632-UPL
20-1/4" [512mm]
20-1/4"
[512mm]
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
6 LAMP
2-15/32" [63mm]
Y=2-3/8"
[61mm]
Y
Y
Y
Y
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
20-1/4" [512mm]
Safe and convenient means of
disconnecting power.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADF091044
2011-03-30 08:56:48
HBE T8
P H OTO M E T R I C S
P H OTO M E T R I C S
HBE-632-N-A-UPL
HBE-632-N-UPL
Candela
Electronic Ballasts
(6) 32W T8 Lamps
3100 lumens
Spacing criterion:
(II) 1.2 x mounting
height, (⊥) 1.1 x
mounting height
Efficiency 76.7%
Test Report:
HBE632-A-UPL.IES
LER =FL80
Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $3.00
Angle
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
Along II
5185
5170
5064
4875
4636
4358
4043
3699
3343
2979
2614
2251
1880
1509
1138
784
466
195
3
Across ⊥
5185
5204
5090
4875
4583
4247
3897
3561
3235
2907
2569
2208
1835
1469
1111
768
437
171
5
45°
5185
5184
5079
4884
4629
4343
4014
3659
3302
2956
2609
2259
1895
1518
1134
764
435
171
5
C o e f fi c i e n t s o f U t i l i z a t i o n
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
Effective floor cavity reflectance
80%
70%
70 50 30 10
70 50 30 10
90
82
75
68
63
58
53
49
46
43
40
90
79
69
61
54
48
43
39
36
33
31
90
75
64
55
47
41
37
33
30
27
25
90
73
59
50
42
37
32
28
25
23
21
87
79
72
66
60
56
51
48
45
42
39
87
76
67
59
52
47
42
38
35
32
30
87 87
73 71
62 58
53 49
46 42
41 36
36 32
32 28
29 25
27 23
24 20
20%
50%
50 30 10
30%
50 30 10
10%
50 30 10
0%
0
81
72
63
56
50
44
40
37
34
31
29
76
67
59
53
47
42
38
35
32
30
28
72
64
56
50
45
40
37
33
31
28
26
70
59
49
42
36
31
27
24
22
20
18
81
69
59
51
44
39
35
31
28
26
24
81
67
56
47
40
35
31
27
24
22
20
76
66
56
49
43
38
34
30
27
25
23
Luminance Data
Zone
0-30
0-40
0-60
0-90
0-180
Angle
in Deg
45
55
65
75
85
%Lamp
20.7
33.0
56.2
69.7
76.7
%Fixture
27.1
43.1
73.2
90.8
100.0
Angle
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
Along II
6282
6292
6249
6137
5953
5708
5405
5051
4654
4218
3762
3282
2773
2247
1706
1166
647
204
3
Across ⊥
6282
6260
5933
5378
4965
4665
4531
4391
4142
3655
3336
3090
2847
2628
2137
1564
984
453
20
45°
6282
6268
6111
5750
5246
4816
4432
4154
3927
3688
3356
2853
2510
2212
1953
1551
985
444
14
C o e f fi c i e n t s o f U t i l i z a t i o n
Zonal Lumen Summary
Lumens
3859
6144
10444
12958
14263
Candela
Electronic Ballasts
(6) 32W T8 Lamps
3100 lumens
Spacing criterion:
(II) 1.3 x mounting
height, (⊥) 1.0 x
mounting height
Efficiency 97.4%
Test Report:
HBE632-UPL.IES
LER =FL93
Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $2.58
Average
0-Deg
cd/sm
6886
6414
5836
4951
3657
76
64
54
45
39
34
30
27
24
22
20
72
62
54
47
41
36
32
29
27
24
22
72
61
51
44
38
33
29
26
23
21
19
Average
45-Deg
cd/sm
6833
6437
5871
4825
3207
Average
90-Deg
cd/sm
6719
6292
5681
4850
3207
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
Effective floor cavity reflectance
80%
70%
70 50 30 10
70 50 30 10
115
104
94
86
78
72
66
62
57
54
50
115
99
86
75
66
59
53
48
44
40
37
115
95
79
67
58
50
44
40
36
32
30
115
91
73
60
51
44
38
34
30
27
24
111
101
91
83
76
69
64
59
55
52
49
111
96
83
73
65
58
52
47
43
40
37
111
92
77
66
57
49
44
39
35
32
29
20%
111
89
72
59
50
43
38
33
30
27
24
50%
50 30 10
30%
50 30 10
50
105
91
79
69
61
55
50
45
41
38
35
99
86
75
66
58
52
47
43
40
37
34
94
82
71
63
56
50
45
41
38
35
33
105
88
74
63
54
48
42
38
34
31
29
105
85
69
58
49
42
37
33
29
26
24
99
84
71
60
52
46
41
37
33
30
28
Zonal Lumen Summary
Luminance Data
Zone
0-30
0-40
0-60
0-90
0-180
Angle
in Deg
45
55
65
75
85
Lumens
4530
7287
12794
17016
18116
%Lamp
24.4
39.2
68.8
91.5
97.4
%Fixture
25.0
40.2
70.6
93.9
100.0
Average
0-Deg
cd/sm
9750
9352
8690
7363
3826
99
81
67
56
48
41
36
32
29
26
24
10%
30 10
94
80
68
58
51
45
40
36
32
30
27
94
78
64
54
46
40
35
31
28
25
23
Average
45-Deg
cd/sm
8525
8130
8555
9795
8326
0%
0
91
75
62
52
44
38
33
29
26
24
21
Average
90-Deg
cd/sm
8448
8805
10164
9877
8495
Modular F-Bay Power Supply Option
Cooper Lighting’s F-Bay Modular Power Supply option is available for use with all F-Bay products. The modular power supply
allows external fixture access for safe and easy servicing. There is no need to remove lamps or reflectors to disconnect fixture
power with F-Bay Modular Power Supply. Access to the individual fixture’s power supply allows servicing without turning off
all the fixtures, disrupting occupants. F-Bay Modular Power Supply is a time-saver in installation – simply plug & power.
Code Compliance
• UL/cUL Certified for Make/Break
under load (UL2549)
• Meets NEC requirements for
ballast disconnect (NEC 410.73G)
1
• Allows for addition of Occupancy
Sensor without hard connections
2
1. Modular Power Supply Receptacle supplied
mounted into fixture Access Plate
2. Modular Power Cord & Plugs in 120, 277, 347,
& 480V configurations for easy plug & power
into existing supply
No internal fixture
access required for
installation or
disconnecting power
Modular Motion Sensor Option
supplied with Mounting Box and
Modular Power Supply Receptacle
• Receptacles complete with
insulating/dust cap
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADF091044
2011-03-30 08:56:48
HBE T8
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: HBE-632-N-A-UNV-L8850-EB82/PLUS-U
Includes V Hangers for rapid installation(5)
Ballast Type (4)
EB8 =T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS=T8 Electronic Instant Start. (8)
High Ballast Factor >1.15.
No. of
Total Harmonic Distortion < 10%
Ballast
1, 2 or 3
ER8 =T8 Electronic Program Rapid Start.(7)
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
ER8 /PLUS=T8 Electronic Program Start.(7)
High Ballast Factor >1.15.
No. of
Total Harmonic Distortion < 10%
Ballast
1, 2 or 3
Voltage (1)
UNV=Universal
120/277 Voltage
UNC=Universal 347/480
Voltage (EB8/PLUS only) (8)
120V=120 Volt
277V=277 Volt
347V=347 Volt
Series
HBE=High Bay
Efficiency
No. of Lamps
4=4 Lamps
6=6 Lamps
Lamp Type
32=32W T8 Lamps (48")
Options
Lamps Installed
L8830=T8 Lamp, 80CRI 3000K
L8835=T8 Lamp, 80CRI 3500K
L8841=T8 Lamp, 80CRI 4100K
L8850=T8 Lamp, 80CRI 5000K
HL=Add HL at end of lamp for
high lumen lamps
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed (1)
Distribution
N=Narrow Beam (Standard)
M=Medium Beam
W=Wide Beam
Shielding
Blank=None
A=Prismatic Acrylic Lens & Doorframe
WG=Wireguard & Doorframe
CL=Clear Acrylic Lens & Doorframe
A/WG=Acrylic Lens, Wireguard & Doorframe
CL/WG=Clear Lens, Wireguard & Doorframe
(1)
(2)
NOTES: Voltage must be specified when ordered with plugs, motion sensor or emergency ballasts. When ordering MS option, specify as UNV (for 120 or
(3)
277V), 347 or 480V. Requires use of MC or MPC cord accessories, specify voltage for plugs. (4) T8 ballast systems suitable for operation in ambient environments up to 131°F (55°C) in open uplight configuration. (5) Can be used in high abuse applications such as gymnasiums. (6) Cannot be combined with
Modular Power Receptacle (MP). (7) For MWS with MP, choose MP in fixture logic and then choose MWS accessory such as MDS6. (8) 2/3 lamp ballast configuration in EB8/PLUS only for UNC version.
Packaging
Options
U=Unit Pack
Blank=Side Rails (Standard)
PALC=Job Pack
MP=Modular Power
In Carton
Receptacle (Used for all
PAL=Job Pack
Cord or Cord and Plug
(3), (7)
Out of Carton
options )
UPL=Uplight Apertures on
Reflector
MWS=Modular Wiring System (6)
MS=360° or 180° motion sensor installed,
120V through 347V, or 480V (2)
Accessories (order separately)
HBL-SPM=Single Monopoint Hanger w/Hub
RH-1=Retrofit Hanger
FH-1=Fixture Hook
FL-1=Fixture Loop
Y-TOGGLE=Y Mounting Toggle, #2 Cable (Specify
10' or 30', requires 2 per fixture)
HBAYC-CHAIN/SET/U=(2) V-Hook Hangers,
36" Chain Sets w/S-Hooks
MC3=3' Modular Power Cord
MPC3=3' Modular Power Cord & Plug (Specify
Voltage)
MC6=6' Modular Power Cord
MPC6=6' Modular Power Cord & Plug (Specify
Voltage)
MMS=360° or 180° Aisle Motion Sensor with
Modular Power Receptacle (120-277V) (3)
MDS6=6' Modular Power Cord with MWS
27DS18/2G06MP Connector (7)
WG/HBL6-4FT-B=4/6 Lamp Wireguard w/Clips
S H I P P I N G DATA
Catalog No.
HBE-632
Quick Ship Ordering Information
Sample Number: HBE632-UPL-L5
Wt.
18 lbs.
Includes V Hangers for rapid installation(5)
Quick Ship orders ship in 5 days in order quantities not to exceed 200 pieces.
NOTE: Orders received after noon are entered on the following day.
Family
HBE=2' x 4'
Distribution
Blank=Narrow Beam
W=Wide Beam
Lamp Qty
4=4 Lamps
6=6 Lamps
Lamp Type
32=32W T8 Lamps (48")
(6)
Power Receptacle
Blank=Standard Wiring to
Access Plate
MP=Modular Power
Receptacle (8)
Ballast Type
T8 Systems
Blank=(1) or (2) 120/277V T8 Instant
Start Electronic 1.15 BF
PS=(1) or (2) 120/277V T8 Electronic
Program Rapid Start 1.15 BF (7)
(7)
NOTES: High lumen (3100 initial) lamps supplied for 4100K T8 systems. Recommended
(8)
when utilizing motion sensor options. Requires use of Modular cord and plug accessories.
Uplight
Blank=No UplightUPL=Uplight
Lamping
Blank=No Lamps
L4=Lamps Installed 80+CRI 4100K (6)
L5=Lamps Installed 80+CRI 5000K
L5HL=Lamps Installed 85+CRI
5000K, High Lumen
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADF091044
2011-03-30 08:56:48