COOPER LIGHTING - METALUX
DESCRIPTION
The HBI series is an outstanding solution for high mounting height
industrial or retail applications. The HBI optic has been optimized to
provide maximum performance from T5 lamps. Optional uplight
component is provided to enable excellent ceiling uniformity. HBI‘s high
lumen package allows the benefits of fluorescent to be applied at high
mounting heights that were traditionally exclusive to HID. The primary
benefits include exceptional color rendering, high system efficacy, 95%
lumen maintenance, long lamp life, instant on/instant re-strike,
economical dimming, and uniform brightness control. Primary
applications include retail, shopping malls, light industrial, gymnasiums
and recreational environments.
®
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
C o n s t ru c t i o n
Full bodied steel housing with
integral ballast channel adds
strength, rigidity and structural
protection for optical assembly.
E l e c t ri c a l
The HBI comes standard with a
high ambient Class P electronic
ballast and twistlock lampholders.
UL/cUL listed for high ambient
environments up to 65°C (149°F)
for all lamps and ballast
combinations when used in open
uplight configurations. Suitable for
damp locations. Optional modular
power receptacle meets UL2459
and NEC 410.73 and is UL/cUL
rated for make and break under
load from outside the luminaire to
speed maintenance.
Finish
White enamel finish preceded by a
multistage cleaning cycle, iron
phosphate coating with rust
inhibitor to protect against
contaminants and oxidation.
D ow n l i g h t / U p l i g h t O p t i c s
Die-formed, segmented optical
design optimizes performance
across three distributions. Optical
choices include a narrow
distribution for aisles, medium
distribution for assembly and
loading areas, or wide distribution
for general, open area lighting. An
uplight option is offered to permit
ceiling uniformity and allow for
ample lamp and luminaire heat
dissipation. Gasketed door frame &
lens assembly is optional for more
demanding environments.
Options
Integral Occupancy Sensor
available and provides from 600
sq. ft. (MS) up to 1250 sq. ft. (MSO)
of coverage at a maximum
mounting height of 40' using
interchangeable lens caps
provided.
Mounting
The HBI series is suited for
suspension mounting with optional
wire hook and chain set or cable
mounting. Single monopoint
mounting is available with SPM
Tong Hanger. Includes V Hangers
for rapid installation.
Wa rra n t y
When operated in high ambient
conditions, the HBI is supported by
a 5 yr/55°C and 3 yr/65°C ballast
warranty when used with a high
ambient ballast in open, uplight
configurations (T5HO lamping
only).
HBI
SERIES
U LT R A 4 7
4, 5 OR 6 T5HO LAMPS
High-Bay Industrial
Fluorescent Luminaire
4-5/16"
[109mm]
E N E R G Y D ATA
16-3/4" [427mm]
Input Watts:
EHT Ballast
647=310W
L A M P C O N F I G U R AT I O N S
6 LAMP
Luminaire Efficacy Rating
LER = 81
Catalog Number: HBI-647T5-N-UPL
D I M E N S I O N TO P V I E W
7/8" [23mm] K.O.
1/2" [13mm] K.O.
V-Hook Hanger
Location
Access Plate
Opening
7/8" K.O.
1/4" [7mm]
3/8" [10mm]
4-5/16" [109mm]
X=1-1/8"
[28mm]
Y=2-13/32"
[61mm]
Y Y X Y Y
16-3/4" [427mm]
16-3/4"
[427mm]
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $2.96
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
2-3/8"
[59mm]
3-3/8"
[84mm]
48-1/8" [1222mm]
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
24-3/8"
[621mm]
Safe and convenient means of
disconnecting power.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADF110940 pc
2012-01-30 14:08:00
HBI T5
P H OTO M E T R I C S
HBI-447T5-UNV-UPL C a n d e l a
(1) Electronic Ballast
(4) F54T5-47W Lamps Angle Along II
0
9407
4285 lumens
5
9392
10
9228
Spacing criterion:
15
8969
(II) 1.2 x mounting
20
8641
height, (⊥) 0.7 x
25
8202
mounting height
30
7678
35
7107
Efficiency 92.8%
40
6465
Test Report:
45
5776
HBI447-UPL.IES
50
5001
55
4211
LER=77
60
3405
Yearly Cost of 1000
65
2583
70
1839
lumens, 3000 hrs at
75
1127
.08 KWH =$3.11
80
85
90
Across ⊥
9407
9016
8140
6715
5197
3992
3240
2990
2708
2473
2270
2113
1831
1362
924
485
141
47
3
45°
9407
9251
8758
7866
6751
5530
4387
3456
2849
2512
2219
1945
1691
1409
1053
626
235
47
4
509
94
0
C o e f fi c i e n t s o f U t i l i z a t i o n
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
110
98
87
77
69
63
57
52
48
45
41
110
94
81
70
62
55
49
45
41
38
35
110
91
76
65
56
49
44
40
36
33
30
107
99
91
83
77
71
66
62
58
55
52
107
95
84
75
68
61
56
51
47
44
41
107
92
79
69
61
54
49
44
40
37
34
107
89
75
64
56
49
44
39
36
33
30
20%
50%
50 30 10
30%
50 30 10
50
101
90
81
72
65
59
54
50
46
43
40
96
86
77
69
62
57
52
48
44
41
39
91
82
74
66
60
55
50
46
43
40
38
101
88
76
67
59
53
48
43
40
36
34
101
86
73
63
55
48
43
39
35
32
30
96
84
74
65
57
52
47
42
39
36
33
Zonal Lumen Summary
Luminance Data
Zone
0-30
0-40
0-60
0-90
0-180
Angle
in Deg
45
55
65
75
85
Lumens
5761
8438
12951
15227
15913
%Lamp
33.6
49.2
75.6
88.8
92.8
80
85
90
789
178
4
Across ⊥
11297
11180
10296
8982
7767
6807
6049
5841
5347
4757
4242
3611
3107
2789
2190
1490
772
93
9
45°
11297
11220
10762
9871
8771
7694
6762
5891
5245
4908
4346
3714
3152
2509
2036
1560
877
291
3
C o e f fi c i e n t s o f U t i l i z a t i o n
Effective floor cavity reflectance
80%
70%
70 50 30 10
70 50 30 10
110
101
93
86
79
74
68
64
60
56
53
HBI-647T5-UNV-UPL C a n d e l a
(2) Electronic Ballasts
(6) F54T5-47W Lamps Angle Along II
0
11297
4285 lumens
5
11176
10
10987
Spacing criterion:
15
10714
(II) 1.2 x mounting
20
10345
height, (⊥) 0.8 x
25
9889
mounting height
30
9351
35
8730
Efficiency 97.2%
40
8041
Test Report:
45
7286
HBI647-UPL.IES
50
6465
55
5583
LER=81
60
4638
Yearly Cost of 1000
65
3654
70
2627
lumens, 3000 hrs at
75
1655
.08 KWH =$2.96
%Fixture
36.2
53.0
81.4
95.7
100.0
Average
0-Deg
cd/sm
17040
15315
12750
9084
2250
96
82
70
61
53
47
42
38
35
32
29
10%
30 10
91
81
71
63
56
50
45
42
38
35
33
91
79
68
59
52
46
42
38
34
32
29
Average
45-Deg
cd/sm
7411
7074
6955
5046
1125
0%
0
89
77
66
57
50
45
40
36
33
30
28
Average
90-Deg
cd/sm
7296
7685
6723
3909
1125
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
Effective floor cavity reflectance
80%
70%
70 50 30 10
70 50 30 10
115
105
96
88
81
74
69
64
60
56
53
115
101
88
78
69
62
56
51
47
43
40
115
97
82
70
61
54
48
43
39
36
33
115
93
77
64
55
48
42
37
34
30
28
111
102
93
85
78
72
67
62
58
54
51
111
98
86
76
68
61
55
50
46
43
40
111
95
80
69
60
53
47
43
39
35
32
111
91
75
63
54
47
42
37
33
30
28
20%
50%
50 30 10
30%
50 30 10
50
105
93
82
73
65
59
53
49
45
41
38
100
89
78
69
62
56
51
47
43
40
37
95
84
75
66
60
54
49
45
42
39
36
105
90
77
67
58
52
46
42
38
35
32
105
88
73
62
53
46
41
37
33
30
27
100
86
74
64
57
50
45
41
37
34
31
Zonal Lumen Summary
Luminance Data
Zone
0-30
0-40
0-60
0-90
0-180
Angle
in Deg
45
55
65
75
85
Lumens
7543
11643
19248
23832
24988
%Lamp
29.3
45.3
74.9
92.7
97.2
%Fixture
30.2
46.6
77.0
95.4
100.0
Average
0-Deg
cd/sm
22550
21302
18922
13994
4470
100
84
71
60
52
45
40
36
32
29
27
10%
30 10
95
83
71
62
55
49
44
40
36
33
31
95
81
68
59
51
45
40
35
32
29
27
Average
45-Deg
cd/sm
15190
14171
12993
13191
7307
0%
0
93
79
66
56
49
42
38
33
30
27
25
Average
90-Deg
cd/sm
14723
13778
14442
12599
2335
Modular F-Bay Power Supply Option
Cooper Lighting’s F-Bay Modular Power Supply option is available for use with all F-Bay products. The modular power supply
allows external fixture access for safe and easy servicing. There is no need to remove lamps or reflectors to disconnect fixture
power with F-Bay Modular Power Supply. Access to the individual fixture’s power supply allows servicing without turning off
all the fixtures, disrupting occupants. F-Bay Modular Power Supply is a time-saver in installation – simply plug & power.
Code Compliance
• UL/cUL Certified for Make/Break
under load (UL2549)
• Meets NEC requirements for
ballast disconnect (NEC 410.73G)
1
• Allows for addition of Occupancy
Sensor without hard connections
2
1. Modular Power Supply Receptacle supplied
mounted into fixture Access Plate
2. Modular Power Cord & Plugs in 120, 277, 347,
& 480V configurations for easy plug & power
into existing supply
No internal fixture
access required for
installation or
disconnecting power
Modular Motion Sensor Option
supplied with Mounting Box and
Modular Power Supply Receptacle
• Receptacles complete with
insulating/dust cap
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADF110940 pc
2012-01-30 14:08:00
HBI T5
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: HBI-647T5-N-UNV-EHT2-MP-UPL-U
Voltage 2
UNV=Universal 120/277V
120V=120 Volt
277V=277 Volt
Series
HBI=High Bay
Industrial
No. of Lamps
4=4 Lamps
5=5 Lamps
6=6 Lamps
Options
Lamps Installed 5
L5841=T5 Lamp, 85CRI 4100K
L5850=T5 Lamp, 85CRI 5000K
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed 2
Lamp Type
47T5= 47W T5HO Lamps (48")
Distribution
N=Narrow Beam (Standard)
M=Medium Beam
W=Wide Beam
Shielding
Blank=None
A=Prismatic Acrylic Lens & Doorframe
WG=Wireguard & Doorframe
A/WG=Acrylic Lens, Wireguard & Doorframe
CL=Clear Acrylic Lens & Doorframe
CL/WG=Clear Lens, Wireguard & Doorframe
Accessories (order separately)
HB-SPM=Single Monopoint Hanger w/Hub
RH-1=Retrofit Hanger
FH-1=Fixture Hook
FL-1=Fixture Loop
Y-TOGGLE- =Y Mounting Toggle, #2 Cable 6
(Specify 10' or 30', requires 2 per fixture)
HBAYC-CHAIN/SET/U=(2) V-Hook Hangers,
36" Chain Sets w/S-Hooks
MC3=3' Modular Power Cord
Options
MPC3=3' Modular Power Cord & Plug
MP =Modular Power Receptacle
(Specify Voltage)
(Used for all Cord or Cord and
MC6=6' Modular Power Cord
Plug options) 1
7 MPC6=6' Modular Power Cord & Plug
NUA=No uplight apertures in housing.
(Specify Voltage)
UPL=Uplight Apertures on Reflector
MMS=360° or 180° Aisle Motion Sensor with
MWS=Modular Wiring System
Modular Power Receptacle (120-277V) 1
MDS6=6' Modular Power Cord with MWS
MS=360° or 180° Motion Sensor,
27DS18/2G06MP Connector 8
120 through 277 3
SWG=Heavy Duty Wireguard for Field
G2=Gasketed Door (Requires
Installation
Selection of Lensed Doorframe)
Ballast Type
EHT =T5HO Linear Electronic Rapid
Program Start
High Ambient. 4
Total Harmonic Distortion < 10%
No. of Ballast
2 or 3
SDF=Slotted Doorframe (Requires
Selection of Lensed Doorframe)
Packaging
U=Unit Pack
PALC=Palletized In Carton
PAL=Job Pack Out of Carton
NOTES:
1 Requires use of MC or MPC cord accessories, specify voltage for plugs.
2 Voltage must be specified when ordered with plugs or emergency ballasts.
3 When ordering MS option, specify voltage as UNV (for 120 or 277V.
4 EHT/HT5/HCT5 ballast systems suitable for ambient environments not to exceed 149°F. (65°C) in open uplight configurations and less lens option.
5 Must specify lamps when ordering.
6 Two required.
7 Not compatible with UPL option.
8 For MWS with MP, choose MP in the fixture logic and then choose MWS accessory such as MDS6.
S H I P P I N G DATA
Catalog No.
HBI-647T5-N-UPL
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Wt.
16 lbs.
ADF110940 pc
2012-01-30 14:08:00