MWS
D ES C R IPTION
MWS-5LT, Modular Wiring Systems with DALI Control, provides low
cost installation of both power for lighting and Class 1 control wiring for
use with Fifth Light DALI systems. Using modular components that plug
together, MWS-5LT can be installed in a fraction of the time of hardwiring
both lighting and control. Plus, MWS-5LT offers the advantage of
relocating fixtures and DALI control devices for future renovations.
The MWS Drop SO Cord with DALI Control (DS-5LT) is used to feed
power and control wiring to suspended industrial LED and Fluorescent
lighting fixtures from a compatible five-conductor Circuit T (CT). See the
CT specification sheet for details on compatibility. Fixtures wired with
MWS DS-5LT can be unplugged under load without interrupting power
or control to downstream fixtures.
®
Type
Catalog #
Project
Date
Comments
Prepared by
Fixtures wired with MWS Drop SO Cords can be unplugged under load
and relocated without interrupting power to fixtures downstream.
D ES IGN FEA TUR ES
• UL Listed under Standard 183 for
make or break under load.
• Meets requirements of Article 604
of the National Electrical Code.
• Galvanized steel exterior with
integral keying for voltage and
amperage.
• 16AWG SO cord rated at 13 amps.
• Pre-stripped leads for easy
termination at fixture.
• Valox 365 constructed contact
housings are approved for
environmental air plenums.
• Unique double-blade contact
ensures proper mating of electrical
components to prevent pushback
or pullout.
• Rated for single fixture feeds only.
DS-5LT
DROP SO CORD
Modular Wiring System
D IMENS IONA L D A TA
1-7/8"
[47mm]
5/8"
[16mm]
Top
Side
MWS AUTOCAD DRAFTING
MWS offers AutoCAD drafting to layout
MWS, providing the contractor with
additional benefits.
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
MWS drawing symbols and details
standardized.
Layouts are available on CD or e-mail.
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
All electrical boxes, conduit, connections
and switches by others.
Install dust covers on unused open ends.
Scale is exaggerated on fixtures and
MWS system applications.
C
ER
TEM
S
YS
D
4-3/8"
[112mm]
S
Front
TIFIE
PS510007EN
2015-04-06 13:22:33
M W S D S -5 L T
SYSTEM VIEW (not to scale)
Extender Cable
Circuit T
Extender Cable
Circuit T
Drop SO Cord
Drop SO Cord
Drop SO Cord (DS)
Feeds power and control to fixture without interrupting circuit. Provided with a 5-wire 16 gauge SO cord.
Typical MWS Wiring System Application shown utilizing Drop SO Cord (DS).
Consult MWS Installation, Application and Specification Manual for additional comprehensive system information.
ORDER ING INFOR M A TION
S A M P L E N U M B E R : 2 7 D S 1 6 /4 G 0 6 5 L T
DS
Voltage
12=120V
27=277V
Component
DS=Drop SO Cord
Conductors and Size
16/4G=4 Conductor and Ground
Cord Length (Feet)
06=6'
11=11'
Options
5LT
NOTES: (1) 16/4G only.
Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.
MWS AUTOCAD DRAFTING
MWS offers AutoCAD drafting to layout
MWS, providing the contractor with
additional benefits.
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
SH IP P ING D A T A
MWS drawing symbols and details
standardized.
Cord
Length
6’
11’
Layouts are available on CD or e-mail.
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
UnitStandard
Wt.Qty./Carton
1.7 lbs.
N/A
3.5 lbs.
N/A
PS510007EN
2015-04-06 13:22:33