INVUE ® DESCRIPTION The simple geometric form of MESA allows it to adapt to either contemporary or traditional architectural settings. Available in single or twin pole mount configurations with optional wall mounting capability, MESA mounting options allow for harmonized site design whether at the entryway or in the parking lot. Catalog # Type Project Comments Date Prepared by S P E C I F I C AT I O N F E AT U R E S Construction HOUSING: Die-cast aluminum main housing and cast aluminum spider mount base maintain a minimum .125 wall thickness and utilize continuous silicone gasketing between castings for a forbidding seal. Four (4) inset quick release fasteners on underside of housing provide access to luminaire interior. DOOR ASSEMBLY: Top mounted, heavy wall, die-cast aluminum door maintains a nominal .125 thickness. Continuous silicone gasketing provides IP66 compliant seal to both housing and assembly. Concealed, stainless steel four (4) bar hinge lock allows opened door to lock into place in the open position for servicing the luminaire. Electrical ELECTRICAL TRAY: Ballast and related electrical components are mounted to a reinforced once-piece tray. In line quick disconnects allow tray to be removed from housing without the use of tools. Optical LENS: Impact resistant 1/8" tempered clear or optional frosted flat glass for concealment of lamp image. Optional clear or frosted tempered sag glass lens improves fixture visibility while providing a subtle performance gain. OPTICAL SYSTEMS: Choice of five (5) high efficiency segmented optical systems constructed of premium 95% reflective anodized aluminum sheet. Optical segments are rigidly mounted inside a heavy wall aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means of attachment which may cause streaking in the light distribution. All reflector modules feature toolless removal, quick disconnect wiring and are toolless field rotatable in 90 degree increments. 250W-400W HID lamp sources feature mogul-base lampholders, while 50-175W HID wattages feature medium-base lampholders. Mounting Fitter assembly mounts over 3" O.D. Tenon via three (3) concealed, stainless steel set screws and provides seamless transition to 4" round poles. Finish Housing and arm finished in a 5 stage premium TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Standard colors include black, bronze, grey, white, dark platinum, graphite metallic and hartford green. RAL and custom color matches available. Consult your INVUE Lighting Systems Representative for more information. MSA MESA 42 - 400W Pulse Start Metal Halide Metal Halide High Pressure Sodium Compact Fluorescent DECORATIVE AREA LUMINAIRE DIMENSIONS 6-7/32" [157mm] 21-1/2" [647mm] C E R T I F I C AT I O N D ATA IP66 Rated U.L. 1598 Listed 2G Vibration Tested CSA Listed 25°C Ambient Temperature Rating ISO 9001 Cutoff 28-1/4" [717mm] E PA Effective Projected Area: (Sq. Ft.) 1.1 S H I P P I N G D ATA Approximate Net Weight (lbs.): 50 YS TEM EISA Compliant: 175-400W. C ER D NOTE: Wattage 50, 70, 100, 150, 175, 250, 320, 350, 400W 50, 70, 100, 150, 250, 400W 175, 250, 400W (1) 42, (1) 57, (2) 42, (2) 57W S Lamp Type Pulse Start Metal Halide (MP) High Pressure Sodium (HPS) Metal Halide (MH) Compact Fluorescent (CF) S WATTAG E TA B L E TIFIE AVU082428 pc 2010-06-29 13:07:43 MSA MESA AC C E S S O R I E S Wall Mount Arm [EPA 1.36] Dual Mount Arm [EPA 1.36] 3" [76mm] 3" [76mm] 4" [101mm] 4" [101mm] 8-3/16" [207mm] 8-3/16" [207mm] 19" [482mm] 38" [965mm] ORDERING INFORMATION Sample Number: MSA-400-MH-MT-3S-FG-BK-L Product Family MSA=MESA (Slipfits over 3" O.D. tenon) Lamp Wattage 1 MP 50=50W 70=70W 100=100W 150=150W Optical System 2S=Type II Color 13 BK=Black MH=Metal Halide HPS=High Pressure Sodium 3S=Type III 4S=Type IV AP=Grey BZ=Bronze CF=Compact Fluorescent7 5S=Type V SL=Forward Throw w/ Spill Light Eliminator WH=White DP=Dark Platinum Voltage 8 120=120V 175=175W 250=250W Lens Type FG=Flat Glass 208=208V 240=240V 320=320W 350=350W 277=277V 347=347V 400=400W2 MH Lamp Type MP=Pulse Start Metal Halide 3 480=480V DT=Dual-Tap wired 277V9 175=175W 250=250W HPS Options CEC=California Title 20 Compliant Ballast (Applies to 175-320W and 400W MP only) FRS=Frosted Sag Glass VS=Polycarbonate Vandal Shield12 F=Single Fuse (120, 277 or 347V) Specify Voltage FF=Double Fuse (208, 240 or 480V) Specify Voltage UNV=120-277V Universal Electronic Ballast 50=50W 70=70W GM=Graphite Metallic GN=Hartford Green FR=Frosted Flat Glass SG=Sag Glass MT=Multi-Tap wired 277V10 TT=Triple-Tap wired 347V11 400=400W2 Accessories 18 VA6028-XX=Dual Mount Arm (EPA 1.36) VA6029-XX=Wall Mount Arm OA/RA1016=NEMA Photocontrol - Multi-Tap OA/RA1027=NEMA Photocontrol - 480V OA/RA1201=NEMA Photocontrol - 347V Q=Quartz Restrike14 EM=Quartz Restrike w/ Time Delay (Also Strikes at 14 Cold Start) EM/SC=Quartz Emergency Separate Circuit14 42CF/EM=Emergency Battery Backup15 100=100W 150=150W R=NEMA Twistlock Photocell Receptacle PC=Button Type Photocontrol (Specify Voltage) 250=250W 400=400W2 DS=Dual Fluorescent Switching Control16 HS=House Side Shield17 Compact Fluorescent L=Lamp Included 42=42W4 57=57W4, 5 84=(2) 42W6 114=(2) 57W6 Notes: 1 Standard with mogul-base socket for HPS, MH and 175-400W MP. Standard with medium-base socket for MP lamps 150W and below. 2 400W MP and MH requires reduced envelope ED28 lamp. 3 MH products available for non-U.S. markets only. 4 Available in Type 3S, 4S, and 5S distributions only. 5 Nominal M.O.L lamp length of 57W CFL not to exceed 7". 6 Dual Compact Fluorescent lamp options available in Type 2S with 84 and 114W. Type 3S available in 84W only. 7 CF ballasts are 120 through 277V. Specify with UNV voltage designation. 8 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 9 Dual-tap is 120/277V wired 277V. 10 Multi-tap is 120/208/240/277V wired 277V. 11 Triple-tap is 120/277/347V wired 347V. 12 Maximum wattage of 250W HID. 13 Custom and RAL color matching available upon request. Consult your INVUE Lighting Systems Representative for further information. 14 Quartz options not available with SL optic. 15 Battery backup provides 90 minutes of supplemental light at 60% of initial rated lamp lumens. Type 3S, 4S, 5S optics only. Must specify 42W Compact Fluorescent lamp. 16 Dual switching requires dual 42W or dual 57W Compact Fluorescent lamps. Allows independent switching control of each lamp through use of two (2) electronic ballasts. Allows 50% power reduction when dual ballasts are independently wired and controlled. 17 House side shield not available on 5S and SL optics. 18 Order separately, replace XX with color suffix. NOTE: Specifications and dimensions subject to change without notice. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 AVU082428 pc 2010-06-29 13:07:43 2010-06-29 16:06:16