COOPER LIGHTING - LUMARK ®
DESCRIPTION
The Steeler Worklight combines a durable cold-rolled steel housing and a
construction wire guard to help protect the lamp at any construction site.
U.L. listed and labeled for damp location. CSA Certified. The Steeler
Worklight is perfect for any industrial area under construction where the
lamps needs to be protected from debris while providing unobstructed
illumination.
Catalog #
Type
Project
Comments
Date
Prepared by
S P E C I F I C AT I O N F E AT U R E S
Construction
Electrical
Mounting
HOUSING: Heavy-duty, formed
steel housing with an open air
ballast for cooler operation is
finished in a white polyester paint.
WIRE GUARD: Durable formed and
welded steel wire coated with a
safety yellow polyester paint for
easy visibility and safety.
BALLAST: High power factor ballast
with class H insulation. U.L. listed
for 65°C (149°F) ambient
temperature operation. Minimum
starting temperature is 40°C (-40° F)
for HPS and -30°C (-20° F) for MH.
CSA certified. SOCKET: Mogul-base
porcelain socket standard for HPS.
For Metal Halide, protected socket
standard, for use with "0" (Open)
rated protected Metal Halide lamps
only.
Easy slide-on die-cast aluminum
mounting box with tapped opening
for 3/4" conduit.
SS
STEELER
WORKLIGHT
400W
Metal Halide
CONSTRUCTION LUMINAIRE
DIMENSIONS
11-1/4" [286mm]
23-1/4"
[591mm]
7-12"
[191mm]
C
ER
TEM
D
YS
S
S
E N E R G Y D ATA
400W MH HPF (455 Watts)
TIFIE
ADH040737 pc
2010-08-24 08:09:11
SS STEELER WORKLIGHT
ORDERING INFORMATION
Sample Number: MHSS-CW-400-MT-OR
Lamp Type
MP=Pulse Start 1
Metal Halide
Reflector Type
CW=Worklight
Lamp Wattage
400=400W
MH=Metal Halide
Series
SS=Steeler
Notes: 1
Voltage 2
MT=Multi-Tap, wired 277V
Options
LL=Coated Lamp Included
5T=5-Tap
C3=3' Cord with no plug (Specify
Voltage)
Socket
PC3=3' Cord with NEMA Plug
(120V-L5-15P, 208V-L6-15P,
347V-L37-20P, AND
480V-L8-20P) Other cord
lengths are available by
specifying length (PC6 for 6'
Cord) Requires FH-1 or FL-1,
or SHK. Example: PC3-120V
Use with TPPH-NEMA.
OR
Open Rated socket must be used.
2
Products also available in non-US voltages and frequencies for international markets.
3
Order separately.
PHC=Power Cord and Plug (18"
Power Cord and Non-NEMA
plug configuration. Must be
used with FL-1 and TPPH
(Thru-Way Pendant Power
Hook). Must specify single
voltage.
Accessories 3
C3=3' Cord-No Plug - Requires FH-1, FL-1, or SHK
PC3=3' Cord with NEMA Plugs (120V-L5-15P,
208V-L6-15P, 240V-L6-15P, 277V-L7-15P,
347V-L37-20P and 480V-L8-20P) Other Lengths
Available. Requires FH-1, FL-1 or SHK. Use with
TPPH-NEMA. Specify Voltage
PHC=Power Hook Cord and Non-NEMA plug
configuration. Must be used with FL-1 and TPPH
(Thru-Way Pendant Power Hook)
FH-1=Fixture Hook
FL-1=Fixture Loop
SHK=Hook with Safety Screw
LL=Coated Lamp Included
FH-1=Die-cast Aluminum Fixture
Hook (with 3/4" threads for
easy installation)
FL-1=Malleable Iron Plated Fixture
Loop (with 3/4" threads for
easy installation)
SHK=Die-cast Aluminum Fixture
Hook (with safety screw and
3/4" threads for easy
installation)
CEC=California Title 20 Compliant
Ballast (Applies to 400W MP
only)
STO C K S A M P L E N U M B E R : M H C W 4 0 ( C OAT E D L A M P I N C L U D E D )
MH
Lamp Type
MH = Metal Halide
CW
Series
CW=Steeler Worklight
40
Lamp Wattage
40=400W
Accessories (Factory Installed)
PC3=3' cord with NEMA plug (120V-L5-15P) threaded through SHK wired 120V
C3=3' cord (120V-L5-15P) threaded through SHK wired 120V
NOTES: Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard ordering information to add options and accessories.
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
ADH040737 pc
2010-08-24 08:09:11
2010-09-29 12:09:10