INVUE ®
DESCRIPTION
SLIDE'S elegant cantilever arm assembly articulates a lighting assembly
in suspended balance. The extended cast aluminum arm and rear
suspension detail in conjunction with the flowing lines from pole to
luminaire provide a dramatic form for entryways or other high visibility
applications where excitement in design is desired.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
Construction
Electrical
HOUSING: Heavy wall, die-cast
aluminum housing maintains a
nominal .125 wall thickness for
superior strength and precise
tolerance control. DOOR: Heavy
wall, die-cast aluminum door
maintains a nominal .125 thickness.
Continuous silicone gasketing
provides IP65 rated ingress
protection throughout housing.
Toolless entry to housing provided
via two (2) push release recessed
latches, finished to match
luminaire. Captive hinging is fully
concealed. ARM: Arm
manufactured of heavy wall, cast
aluminum. Fits 4" O.D. tenon or
slipfits over 4" round straight pole.
SLIDE is secured via four (4)
stainless steel hex head fasteners.
Consult INVUE poles brochure for a
complete listing of pole mounting
options.
ELECTRICAL TRAY: Ballast and
related electrical components are
mounted to a reinforced one piece
toolless release power tray.
Electrical quick disconnects allow
tray to be completely removed
from housing providing ample
hand and tool room for attachment
of luminaire during installation.
means of attachment which may
cause streaking in the light
distribution. All reflector modules
feature toolless removal, quick
disconnect wiring plugs, and are
toolless field rotatable in 90 degree
increments. Optics feature
medium-base lampholders for HID
lamp sources.
Finish
Optical
LENS: Impact-resistant 1/8"
tempered clear or optional frosted
flat glass for concealment of lamp
brightness. OPTICAL SYSTEMS:
Choice of five (5) high efficiency
segmented optical systems
constructed of premium 95%
reflective anodized aluminum
sheet. Optical segments are rigidly
mounted inside a heavy gauge
aluminum housing for superior
protection. All segment faces are
clean of rivet heads, tabs, or other
Housing and arm finished in a 5
stage premium TGIC polyester
powder coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, and graphite
metallic. RAL and custom color
matches available. Consult your
INVUE Lighting Systems
Representative for more
information.
SDS
SLIDE SMALL
42 - 175W
Pulse Start Metal Halide
Metal Halide
High Pressure Sodium
Compact Fluorescent
ARCHITECTURAL
AREA LUMINAIRE
DIMENSIONS
6-11/64"
[157mm]
C E R T I F I C AT I O N D ATA
IP65 Rated
U.L. 1598 Listed
3G Vibration Tested
CSA Listed
25°C Ambient Temperature Rating
ISO 9001
Full Cutoff
37-7/64"
[942mm]
19-5/8"
[497mm]
E PA
Effective Projected Area:
(Sq. Ft.)
2.97
WATTAG E TA B L E
Wattage
70, 100, 150W
70, 100, 150W
175W
42, 57W
S H I P P I N G D ATA
(Approximate)
Net Weight (lbs.): 88
YS
C
ER
TEM
S
Lamp Type
Pulse Start Metal Halide (MP)
High Pressure Sodium (HPS)
Metal Halide (MH)
Compact Fluorescent (CF)
D
21-3/16"
[533mm]
S
48-21/32" [1235mm]
TIFIE
AVU082436 pc
2010-06-28 10:53:17
SDS SLIDE SMALL
POLE OPTIONS
Brining Poles and Luminaires Together
INVUE offers a full line of decorative and standard poles that can bring luminaire and pole together as an integrated,
flowing system from the ground up. Consult the INVUE Poles brochure for ordering information and product specifications.
ORDERING INFORMATION
Sample Number: SDS-175-MH-MT-3S-BK-L
Product Family
SDS=SLIDE Site
Small
Lamp Wattage
1
Lamp Type
MP=Pulse Start Metal
Halide
MH=Metal Halide
HPS=High Pressure Sodium
2
MP
CF=Compact Fluorescent6
70=70W
100=100W
Voltage 7
120=120V
150=150W
MH
3
208=208V
240=240V
175=175W3
HPS
277=277V
347=347V
70=70W
100=100W
150=150W
Compact Fluorescent
4
42=42W
57=57W5
Notes: 1
480=480V
DT=Dual-Tap wired 277V8
Optical System
2S=Type II
3S=Type III
4S=Type IV
5S=Type V
SL=Forward Throw w/
Spill Light Eliminator
Color 11
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
MT=Multi-Tap wired 277V9
TT=Triple-Tap wired 347V10
Options 12
F=Single Fuse (120, 277 or 347V) Specify
Voltage
FF=Double Fuse (208, 240 or 480V)
Specify Voltage
Accessories 16
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
Q=Quartz Restrike13
EM=Quartz Restrike w/ Time Delay 13
(Also Strikes at Cold Start)
EM/SC=Quartz Emergency Separate 13
Circuit
42CF/EM=Emergency Battery Backup14
R=NEMA Twistlock Photocell Receptacle
PC=Button Type Photocontrol (Specify
Voltage)
HS=House Side Shield15
VS=Polycarbonate Vandal Shield
FR=Frosted Flat Glass Lens
L=Lamp Included
UNV=120-277V Universal
Electronic Ballast
Fixture includes decorative arm assembly.
2
All HID lamps are medium-base.
3
MH products available for non-U.S. markets only.
4
Available in Type 3S, 4S, and 5S distributions only.
5
Nominal M.O.L lamp length of 57W CFL not to exceed 7".
6
CF ballasts are 120 through 277V. Specify with UNV voltage designation.
7
Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
8
Dual-tap is 120/277V wired 277V.
9
Multi-tap is 120/208/240/277V wired 277V.
10
Triple-tap is 120/277/347V wired 347V.
11
Custom and RAL color matching available upon request. Consult your INVUE Lighting Systems Representative for further information.
12
Add as suffix in the order shown.
13
Quartz options not available with SL optic.
14
CF lamps only. Battery backup provides 90 minutes of supplemental light, minimum operating temperature of 32°F (0°C), 42W maximum.
15
House side shield not available on 5S and SL optics.
16
Order separately.
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
AVU082444 pc
2010-06-25 12:40:12
2010-06-28 16:06:05