INVUE Catalog # Type

advertisement
INVUE ®
DESCRIPTION
SLIDE's elegant cantilever arm assembly articulates a lighting assembly
in suspended balance. The extended aluminum arm and rear suspension
detail in conjunction with the flowing lines from pole to luminaire
provide a dramatic form for entryways or other high visibility
applications where excitement in design is desired.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
Construction
Electrical
HOUSING: Heavy wall, die-cast
aluminum housing maintains a
nominal .125 wall thickness for
superior strength and precise
tolerance control. DOOR: Heavy
wall, die-cast aluminum door
maintains a nominal .125 thickness.
Continuous silicone gasketing
provides IP65 rated ingress
protection throughout housing.
Toolless entry to housing provided
via two (2) push release recessed
latches, finished to match
luminaire. Captive hinging is fully
concealed. ARM: Arm weldment
assembly manufactured of 6061,
6063 and cast aluminum
subcomponents. Arm assembly
mounts to a 5" O.D. round straight
pole equipped with a 4" O.D. by 10"
tall tenon. Arm secures to pole with
provided stainless steel hex head
fasteners. Arm includes a
removable side cap for wire access
and inspection.
ELECTRICAL TRAY: Ballast and
related electrical components are
mounted to a reinforced one piece
toolless release power tray.
Electrical quick disconnects allow
tray to be completely removed
from housing providing ample
hand and tool room for attachment
of luminaire during installation.
Optical
LENS: Impact-resistant 1/8"
tempered clear or optional frosted
flat glass for concealment of lamp
brightness. OPTICAL SYSTEMS:
Choice of five (5) high efficiency
segmented optical systems
constructed of premium 95%
reflective anodized aluminum
sheet. Optical segments are rigidly
mounted inside a heavy gauge
aluminum housing for superior
protection. All segment faces are
clean of rivet heads, tabs, or other
means of attachment which may
cause streaking in the light
distribution. All reflector modules
feature toolless removal, quick
disconnect wiring plugs, and are
toolless field rotatable in 90°
increments. Optics feature mogulbase lampholders for HID lamp
sources.
Finish
Housing and arm finished in a 5
stage premium TGIC polyester
powder coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, and graphite
metallic. RAL and custom color
matches available. Consult your
INVUE Lighting Systems
Representative for more
information.
SDM 1
SLIDE MEDIUM
84 - 400W
Pulse Start Metal Halide
Metal Halide
High Pressure Sodium
Compact Fluorescent
ARCHITECTURAL
AREA LUMINAIRE
DIMENSIONS
7-1/16"
[179mm]
41-1/2"
[1054mm]
53-5/16" [1354mm]
27-11/16"
[687mm]
24-15/16"
[632mm]
C E R T I F I C AT I O N D ATA
IP65 Rated
U.L. 1598 Listed
3G Vibration Tested
CSA Listed
25°C Ambient Temperature Rating
ISO 9001
Full Cutoff
WATTAG E TA B L E
EISA Compliant: 175-400W.
E PA
Effective Projected Area:
(Sq. Ft.)
SDM1: 3.48
S H I P P I N G D ATA
(Approximate)
Net Weight (lbs.):
SDM1: 108
C
ER
TEM
S
YS
D
NOTE:
Wattage
150, 175, 250, 320, 350, 400W
150, 250, 400W
175, 250, 400W
(2) 42, (2) 57W
S
Lamp Type
Pulse Start Metal Halide (MP)
High Pressure Sodium (HPS)
Metal Halide (MH)
Compact Fluorescent (CF)
TIFIE
AVU082443 pc
2010-06-28 10:52:22
SDM 1 SLIDE MEDIUM
ORDERING INFORMATION
Sample Number: SDM1-400-MH-MT-3S-BK-L
Product Family 1
SDM1=Slide Medium
Single Head
Assembly
Lamp Wattage
2
MP
150=150W
175=175W
250=250W
320=320W
350=350W
400=400W3
Lamp Type
MP=Pulse Start Metal Halide
Optical System
2S=Type II
MH=Metal Halide
HPS=High Pressure Sodium
3S=Type III
4S=Type IV
CF=Compact Fluorescent6
5S=Type V
SL=Forward Throw w/
Spill Light Eliminator
Voltage 7
120=120V
208=208V
240=240V
277=277V
347=347V
175=175W
480=480V
DT=Dual-Tap wired 277V8
250=250W
400=400W3
MT=Multi-Tap wired 277V9
TT=Triple-Tap wired 347V10
HPS
UNV=120-277V Universal
Electronic Ballast
MH
4
150=150W
250=250W
Options
CEC=California Title 20 Compliant Ballast
(Applies to 175-320W and 400W MP
only)
F=Single Fuse (120, 277 or 347V) Specify
Voltage
Accessories 14
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
FF=Double Fuse (208, 240 or 480V) Specify
Voltage
Color 11
BK=Black
Q=Quartz Restrike12
EM=Quartz Restrike w/ Time Delay (Also 12
Strikes at Cold Start)
AP=Grey
BZ=Bronze
EM/SC=Quartz Emergency Separate Circuit12
42CF/EM=Emergency Battery Backup
WH=White
DP=Dark Platinum
R=NEMA Twistlock Photocell Receptacle
PC=Button Type Photocontrol (Specify Voltage)
GM=Graphite Metallic
HS=House Side Shield13
FR=Frosted Flat Glass Lens
L=Lamp Included
400=400W
Compact Fluorescent
84=(2) 42W5
114=(2) 57W5
Notes: 1
Fixture includes decorative arm assembly.
2
Standard with mogul-base socket for HPS, MH and 175-400W MP. Standard with medium-base socket for MP lamps 150W and below.
3
400W MP and MH requires reduced envelope ED28 lamp.
4
MH products available for non-U.S. markets only.
5
Dual Compact Fluorescent lamp options available in Type 2S with 84 and 114W. Type 3S available in 84W only.
6
CF ballasts are 120 through 277V. Specify with UNV voltage designation.
7
Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
8
Dual-tap is 120/277V wired 277V.
9
Multi-tap is 120/208/240/277V wired 277V.
10
Triple-tap is 120/277/347V wired 347V.
11
Custom and RAL color matching available upon request. Consult your INVUE Lighting Systems Representative for further information.
12
Quartz options not available with SL optic.
13
House side shield not available on 5S and SL optics.
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
AVU082443 pc
2010-06-28 10:52:22
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
2012-03-05 17:03:12
Download