Chapter 6. Networking Protocols
Project 6A: Install the TCP/IP Protocol
The steps for completing this exercise are located in the workbook and in the textbook.
Careful attention to completion of each step will result in a successful installation. If
there is a failure, redo each step in order.
Project 6B: Logical Addressing
Logical addressing temporarily identifies a device or location on the network by
assigning a unique logical address to the device.
Node Address
Default Gateway
Node Address
Project 6D: IPX Logical Addressing
1. The segment address is 0B0E0D0A.
1. Identify which of the following IPX logical addresses is valid by placing a V (valid)
or N (not valid) next to the address.
_____ 1. 094GEDB:000000001234
__V___ 2. 08080808:BADDADBEAD12
_____ 3. 123456789:123456789000
_____ 4: 08AB86EF00:111111111110
__V___ 5. 0000BED1:11115555BEAD:456h
Project 6E: Install the NWLink Protocol
The steps to install NWLink are outlined in the workbook. In the event problems occur,
walk through each step of the project to ensure you haven’t missed a step.