CORIPOL ESA – Polymer Enhanced Softening Agent with Excellent Milling Properties

advertisement

Benefits

Features

Edition 2014.1

CORIPOL

®

ESA – Polymer Enhanced Softening Agent with Excellent

Milling Properties

CORIPOL

®

ESA is a reddish brown slightly turbid liquid, based on a combination of natural and synthetic substances.

Charge: anionic

Light fastness: very good

Heat resistance: very good

Handling & storage:

Wear goggles and gloves during handling. ALWAYS STIR WELL

BEFORE USE and close containers tightly afterwards.

Can be stored for about 1 year (from date of production) if kept at room temperatures. If product becomes frozen, warm to approx. 20°C and stir well before use.

Method of diluting:

CORIPOL

®

ESA is diluted by stirring 4 parts water at 50°C into the product.

Stability:

CORIPOL

®

ESA is stable in the presence of anionic dyestuffs, vegetable and synthetic tanning agent and chrome salts, in normal concentrations.

CORIPOL

®

ESA is however sensitive to low bath pH values and should be applied at pH`s > 4.

CORIPOL

®

ESA provides the following main benefits to the leather:

!

Uniform milling pattern

!

Excellent light and heat fastness

!

Good grain tightness

!

Good degree of softness

Other benefits:

!

Very clear, clean pearl crust

!

Good fogging values (gravimetric)

!

Neutral odour

!

Slightly silky handle

!

Shiny two way nap on nubuck and split, without smearing

!

Low specific weight

!

Minimum plumping effect, resulting in tight and flat leathers

Application CORIPOL

®

ESA can be used alone or in combinations for shoe, handbag and automotive articles, as well as all other soft leather articles from wet blue or wet white.

Depending on the requested article, the following combinations are recommended:

Our application recommendations are in line with our present state of knowledge. They do not, however, exempt the customer from

1 performing his own tests to determine the suitability of the supplied products for their intended purposes. Application of the products lies outside the scope of our control and therefore comes within the customer’s sphere of responsibility. We guarantee the satisfactory quality of our products subject to general terms of sale and delivery.

Product INformation continued

CORIPOL

®

ESA – Application cont...

Edition 2014.1

Wet blue & FOC based automotive leather:

1 - 3 % CORIPOL

®

ESA as pre-fatliquor in the neutralization stage

2 - 4 % CORIPOL

®

ALF

6 - 8 % CORIPOL

®

ESA as main fatliquor

• For enhanced inner softness increase the amount of

CORIPOL

®

ALF or apply MAGNOPAL

®

SOF

• For enhanced fine and regular milling pattern the amount of

CORIPOL

®

ESA can be increased

Shoe nappa :

1 – 3 % CORIPOL

®

ESA as pre-fatliquor in the neutralization

2 – 4 % CORIPOL

6 – 8 % CORIPOL

®

BZE

®

ESA as main fatliquor

Split :

2 – 4 % CORIPOL

®

6 – 8 % CORIPOL

®

SV

ESA as main fatliquor

CORIPOL

®

ESA should be mixed with companion fatliquors and be diluted 1:4 with water at 50°C before addition to the drum

CORIPOL

®

ESA – Product Characteristics

Trade form at 20°C slightly turbid viscous liquid

Appearance at 20°C

Water Content (%) pH - Value (10%) reddish brown approx. 50% approx. 7.0

This information is for guidance only.

A Product Specification is available on request.

Regarding toxicological and ecological data see the safety data sheet of above product.

CORIPOL ® and MAGNOPAL ® are registered or filed trademarks owned by or licensed to TFL in most countries.

2

Above data are based on the current state of knowledge. However, buyer is not released from his obligation to examine the material on receipt. Seller makes no warranty of merchantability or fitness for practical use or application.

Download