NetXtend™ Sole Series Enclosures
Key Features
nDoor mounted heat exchanger or
air conditioner for thermal control
n120 V or 208/240 V single-phase
AC power input options available
along with optional AC surge
protection device
nOptional vented base chamber
for batteries, including Ni-Cd
nAccepts NetSure™ 502 (-48 VDC)
power system; integrated
or external DC distribution
available with optional DC surge
protection device that protects
entire DC bus
nSide mounted customer access
module available
nPower systems designed to
meet GR-63-CORE (NEBs),
GR-1089-CORE (EMC) and
NEC safety requirements
The NetXtend™ Sole Series offers thermal management,
battery backup and room for wireless carrier equipment
to meet your small cell application needs.
Description
The NetXtend Sole Series is a compact and flexible enclosure solution for housing
electronics, distribution, and battery backup equipment in outdoor telecom
networks. To provide maximum protection for your equipment investment, the
NetXtend Sole is designed and tested to withstand the most severe environmental
conditions. Thermal management is achieved through use of heat exchanger or
air conditioner cooling which keeps electronics from exceeding their optimal
temperatures, yet never introduces outside air and pollutants into the equipment chamber. The NetXtend Sole cabinet is extremely flexible, and a modular
approach is taken wherever possible so the cabinet can be quickly configured to
meet your exact requirements.
Application
This cabinet can economically house a variety of next generation electronic
equipment including telco backhaul, fiber distribution, and radio equipment
for wireless applications.
nDesigned to meet Telcordia’s
GR-487-CORE, Issue 2
requirements
nUL Listed to NWIN 2416
requirements
NetXtend Sole Cabinet
Shown with 650 W heat exchanger
and customer access module
123000D-NetXtendSole / 0915
NetXtend Sole Cabinet
Shown with 2000 BTU/hr
air conditioner
1
NetXtend™ Sole Series Enclosures
Technical Specifications
Enclosure
Cabinet Access
Security
Dimensions
NetXtend Sole
Environmentally sealed door to access the equipment chamber
(2) 1/4 turn fasteners on door; lower fastener accepts padlock
Cabinet w/ Heat Exchanger
26.50"
Heat Exchanger
8.49"
Mounting
Mounting Options Pad, pole, wall or H-Frame
Vertical Rack Space 63.5 cm (25") of unobstructed mounting space, 71 cm (28") total
Equipped with 58 cm (23") steel equipment rails bonded
Racks
by contact to master ground bar
Equipment
Rails have limited front to rear adjustability. Factory set for 30 cm (12")
Mounting
deep, center mount equipment [13 cm (5") front, 18 cm (7") rear]
Air Conditioner
10
10.0"
26.5"
20.0"
Thermal Protection
Door mounted heat exchanger, capable of removing 650 watts of heat
Heat Exchanger
at 46 °C ambient / 65 °C return (114.8 °F ambient / 149 °F return)
Air Conditioner
Door-mounted 2000 BTU/hr air conditioner with 500 W heater
Equipment Chamber
Optional NetSure™ 502 (-48 VDC) power system w/ integrated or
DC Power
external DC distribution, with optional DC SPD
Din-rail mount AC distribution, 120V or 208/240V single-phase input*
AC Power
or 2-position external-mount 120V AC load center
AC Outlet
Ground Fault Circuit Interrupter (GFCI) protected 15 A outlet
Grounding
(2) 6-position, 2-hole ground bars; one is isolated from frame
33.02"
5.13"
48.0"
Heat Exchanger
24.11"
19.69"
21.73"
14.98"
18.01"
9.90"
Air Conditioner
Cabinet Only
28.0"
10.0"
38.0"
27.90"
Cabinet w/ Air Conditioner
Optional Modules
Battery Base
Customer
Access Module
Ventilated external compartment; includes options for Ni-Cd
batteries or VRLA batteries with heater pad
Sealed equipment chamber with (2) 1/4 turn fasteners mounts to
right side of main cabinet; includes 10-position ground bar
* Din-rail distribution includes AC surge protection.
Ordering Information
Emerson
Part No.
F2014021
equipped
with:
F2015022
equipped
with:
F1009260
includes:
F1009261
includes:
F1009262
includes:
F1009263
includes:
Description
NetXtend™ Sole Cabinet with Ni-Cd battery base (235 lb. unequipped)
(1) ZZ032 NetSure™ 502 power system:
2 RU, 3 rectifier slots, 4 load CB/5 GMT with DC surge protection
(1) Internal AC distribution (120 V) with AC surge protection
(1) 2000 BTU/hr air conditioner
NetXtend Sole Cabinet with Ni-Cd battery base (255 lb. unequipped)
(1) ZZ063 NetSure 502 power system:
8 RU, 6 rectifier slots, 24 load CB with DC surge protection
(1) Internal AC distribution (208/240 V) with AC surge protection
(1) 650 W heat exchanger
NetXtend Sole Cabinet with VRLA battery base (213 lb. unequipped)*
Customer access module, 10-position ground bar, 650 W heat exchanger
NetXtend Sole Cabinet, no battery base (165 lb. unequipped)*
Customer access module, 10-position ground bar, 650 W heat exchanger
NetXtend Sole Cabinet with VRLA battery base (190 lb. unequipped)*
650 W heat exchanger
NetXtend Sole Cabinet, no battery base (142 lb. unequipped)*
650 W heat exchanger
Dimensions
Main Cabinet
Battery Base
Air Conditioner
Heat Exchanger
Customer Access Module
Emerson
Part No.
Accessories
F1009264
F1009265
F1009266
F1009604
F1009300
F1009351
F1009656
F1006640
33.02" H x 28.00" W x 18.01" D
14.98" H x 28.00" W x 18.01" D
20.00" H x 10.00" W x 9.90" D
26.50" H x 24.11" W x 8.49" D (in green on drawing)
33.02" H x 10.00" W x 18.01" D (mounts on right side)
Description
NetXtend Sole pole mount kit
NetXtend Sole wall mount kit
NetXtend Sole pad mount kit
NetXtend Sole H-frame kit
NetXtend Sole battery bracket kit for SBS batteries
NetXtend Sole mounting bracket kit for 100-pr. protection panel
in customer access module
NetXtend Sole conduit template for customer access module
100-pr. protection panel
* Equipped with external 2-position load center (120 V) mounted to left side of cabinet.
EmersonNetworkPower.com/EnergySystems (North America)
© Emerson Network Power Energy Systems North America 2015.
Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson® and Consider it Solved are service marks and
trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson
Network Power Energy Systems North America. Any other product, brand, or company names or logos are the property of the respective owner.
2
While every precaution has been taken to ensure accuracy and
completeness herein, Emerson Electric Co. assumes no responsibility,
and disclaims all liability, for damages resulting from use of this
information or for any errors or omissions. Specifications subject to
change without notice.
123000D-NetXtendSole / 0915