Boise State University
Department of Electrical and Computer Engineering
ECE 230L Digital Systems Laboratory
Practical Quiz 1
Name: ______________________________
Instructions: Show all steps and logic circuits for full or partial credit. It is very important that you write clearly, so
that your quiz can be graded appropriately and fairly.
1. Design, simulate, build, and verify the logic circuit described by f(a,b,c,d) = ∑m(3,6,7,9,12,13), where d is LSB
and a is MSB.
What you need to provide:
1. [10 points] Truth table.
2. [25 points] Logic circuits (Xilinx schematic capture).
3. [20 points] Simulation waveform.
4. [15 points] FPGA configuration code (screen capture from PACE or Xilinx).
5. [10 points] Brief discussion of results (does the result match what you expected!).
6. [20 points] Implementation of your design on BASYS-2 FPGA.
You need to show your work to the lab instructor.
1 of 2
Check-off: ________________
2 of 2