2011-2012 Associate in Applied Technology Degree Worksheet
Mechatronics
Name _______________________________ SID ______________ Date ________ Advisor _______________________
The Associate in Applied Technology degree is designed for students who wish to complete a program with a specific professional-technical career
objective. Students are required to maintain a cumulative grade point average of 2.00 to receive this degree. Any course specified below under major
area requirements must be completed with a grade of “C” or better to satisfy the requirement. Plan ahead as some courses are not taught every
quarter. All general education classes must be 100-level or above.
Program Distribution
General Education Requirements
See the back of this sheet for a list of classes that will fulfill each
requirement.
Additional Major Area Requirements:
Courses listed below are to be completed with a “C” or better.
 Communication Skills — 5 credits
Pick one of the following two options:
………………………..…………………….
Option 1: Instrumentation
………………………..…………………….
Credits Needed
0
 Computational Skills — 5 credits
………………………..…………………….
………………………..…………………….
Credits Needed
0
 Human Relations — 5 credits
………………………..…………………….
………………………..…………………….
Credits Needed
0
Major Area Requirements
Courses listed below are to be completed with a “C” or better.
ELEC 101
DC Fundamentals
6
ELEC 102
AC Fundamentals
6
ELEC 121
Semiconductors I
6
MTX 103
Basic Measurement Tools
2
MTX 105
Basic Hydraulics
2
MTX 107
Basic Pneumatics
2
MTX 110
Electric Motor Control 1
4
MTX 113
Electrical Power Distribution
2
MTX 117
Mechatronics 1
2
MTX 130
Programmable Logic Controllers 1
4
MTX 215
Mechatronics 2
3
MTX 217
Mechatronics 3
5
MTX 220
Workplace Organization and Practices
2
MTX 223
Work Teams and Product Design
3
MTX 250
Adv. Programmable Logic Controllers
4
MTX 270
Capstone
3
MTX 285
Project Mgmt and Lean Manufacturing
2
MTX 295
Organizational Entrepreneurship
3
MTX 123
Pick and Place Robot
2
MTX 125
Servo Robot
3
MTX 135
Industrial Electrical Wiring
3
MTX 165
Electric Motor Control 2
4
MTX 205
Flow Process Control
5
MTX 207
Thermal Process Control
5
MTX 210
Electro-Fluid Power
4
MTX 225
Speed Control Systems
2
Option 2: Mechanical Automation
MTX 120
Mechanical Drives 1
3
MTX 127
Piping
2
MTX 150
Mechanical Drives 2
2
MTX 153
DC Drives
4
MTX 155
AC Drives
4
MTX 255
Advanced Hydraulics
3
MTX 230
Laser Alignment
2
MTX 227
Mechanical Drives 3
4
MTX 260
Advanced Pneumatics and Vacuum
6
MARs Needed
Total Complete
0
TOTAL CREDITS REQUIRED: 104-106
0
NEEDS:______
Student Signature:____________________________________
Advisor Signature:____________________________________
5HYLVHG812)),&,$/(9$/8$7,21*,9(172678'(17
Associate in Applied Technology Worksheet
General Education Requirements:
Some specific requirements of a program may
also meet the General Education requirements.
A total of fifteen (15) credits between the three
subject areas is required. You may take three
(3) to five (5) credits from the courses listed
below in each area of Communication Skills,
Computational Skills and Human Relation, but
the combined total needs to equal fifteen (15)
credits.
Communication Skills [C] – 5 credits
Select a minimum of five (5) credits from
the list below:
• BTEC 107
• ENGL& 101 or 135
• ENGL 212 or BUS 211
• ENGL& 235
Computational Skills [CP] – 5 credits &RPSOHWHILYH FUHGLWVIURPWKHOLVWEHORZ
‡0DWK±0$7+0$7+ RUDQ\FRXUVHIRUZKLFKRQHRIWKHVHLVD
SUHUHTXLVLWH ‡&RPSXWHU7HFKQRORJ\±&7(&
Human Relations [HR] – 5 credits &RPSOHWHILYH FUHGLWVIURPWKHOLVWEHORZ
‡&RPPXQLFDWLRQ6WXGLHV±&067
&067 ‡+XPDQ'HYHORSPHQW±+'(9
‡0DQDJHPHQW±0*07
‡3V\FKRORJ\±36<& ‡6RFLRORJ\±62& ‡:RPHQ¶V6WXGLHV±:6
Notes: