Brief Resume of the Professional Mechanical Engineer
:
:
:
:
:
:
Constante F. Villoria
2004 - Present
:
SMART-TECH POWER SYSTEMS &
DEVELOPMENT CORPORATION
Km.29 Aguinaldo Hi-way, Salitran II, Dasmariñas, Cavite
Prof. Mechanical Engr., / Designer
2001 - Present
:
McV ENGINEERING SERVICES
Pasay City, Philippines
Proprietor
2003 - Present
:
ROAD RUNNER NETWORK, INC.
Abs-Cbn, Quezon City
Mechanical Consultant
Name
Position
Date of Birth
Place of Birth
Educational Attainment
Professional License
Prof. Mechanical Engineer/Designer
March 11, 1952
Pasay City
Bachelor of Science in Mechanical Engineering
Registered Professional Mechanical Engineer
PRC Reg. No. 3275
Employment History:
SIEMENS, INC.
Makati, Phils.
Senior Mechanical Engineer
2001 - 2003
Duties and Responsibilities :
1. Project management and supervision of mechanical, plumbing and special system (fuel
hydrant; sewage treatment plant, passenger loading bridge; elevator, escalator and
moving walkways) works; sign and seal of mechanical drawings for submittal to client
and local government offices; technical coordination with client and consultants.
AMERICAN BUFFET, ITALY
Milan, Italy
Facility Maintenance / Installer
2000
Duties and Responsibilities :
1. Include maintenance & operation of various equipment and setting up of mobile
shelters/tents, furnitures for outdoor and indoor parties and gatherings in different
locations in Milan, Italy.
LFD GENCON, INC., PHILS.
Quezon City, Phils.
Project Manager
1998 - 2000
Duties and Responsibilities :
1. Project Management and construction supervision; planning and scheduling; site
inspection and provide solutions to problems encountered; labor and materials cost
control; preparation of correspondence and reports and attend meeting with clients
and consultants.
MINISTRY OF DEFENSE AND AVIATION
Saudi Arabia
Sr. Mechanical Engineer
1987 - 1997
Duties and Responsibilities :
1. Include project management and supervision; contract administration; preparation of
project studies including design, bill of materials and cost estimate for budgetary
purposes, bid documents and specifications; evaluate contractor’s work progress,
claims and payment; provide safety and security guidelines to contractors; quality
assurance of the project; review, approval of drawing and material submittals;
inspection and monitoring of contractor’s activities on site; test and commissioning of
equipment and systems, start-up of operation and training of maintenance personnel.
SA PRC CONSULTING ENGINEERS
Riyadh, KSA
Mechanical Engineer
1982 - 1987
Duties and Responsibilities :
1. Supervision, inspection, monitoring and approval of contractor’s activities on site
enduring their full compliance to contract specification and drawings; supervision and
monitoring of site testing including final acceptance test and commissioning; evaluate
and recommend on contractor’s payment certificate, claims and progress resolve as to
interpretation and implementation of contract drawing and specification to minimize
possible error and time loss; review/approval of material submittal, modifications, shop
and as-built drawings.
URS INTERNATIONAL, INC.
Jeddah, KSA
Mechanical Engineer
1980 - 1981
Duties and Responsibilities :
1. Supervision, inspection and approval of contractor’s activities on site; evaluate
contractor’s monthly progress as basis for payment; testing and commissioning of
equipment and systems; design of sanitary facilities; review/approval of material
submittals, shop drawing and as-built drawings.
SAN MIGUEL CORPORATION
San Fernando, Pampanga, Phils.
Mechanical Engineer
1980 - 1975
BU. OF FISHERIES & AQUIATIC RESOURCES
Quezon City, Philippines
Mechanical Engineer
Duties and Responsibilities :
1. Supervision of building construction and machineries & equipment installation; labor
and material cost control; testing and commissioning; operation and maintenance of
equipment such as flake ice making machine, refrigeration equipment, deep-well and
booster pump.
ELECTROHOME REFRIGERATION IND.
Sampaloc, Manila, Phils.
Cadet Engineer
1974 - 1975
Duties and Responsibilities :
1. Design, drafting, material take-off and cost estimate of cold storage facilities,
refrigerated showcase and s.s. duct supervision of equipment and piping
installation, duct fabrication; testing and commissioning.
SEMINARS AND CONVENTIONS ATTENDED
1. Basic Training Course for Inspectors conducted by Bureau of Working Conditions in
collaboration with Occupational Safety and Health Center
OSHC, Diliman, Quezon City, April 18 – 29, 2005
2. Pollution Control Officer Training Course conducted by DENR/PSME
Diliman Quezon City, September 12 - 16, 2004
3. Training and Seminar on Operation and Maintenance of Fuel Hydrant System conducted
by Niigata (Japan) NAIA IPOT 3. Villamor Air Base, Pasay City, Nov. 18 - 22, 2002
4. Training and Seminar on the Operation and Maintenance of Passenger Loading Bridges
conducted by Siemens-Thyssen
NAIA IPT 3, Villamor Air Base, Pasay City, Dec. 3 - 8, 2002
5. Training and Seminar on Operation and Maintenance of Water Treatment Plant
conducted by Al Kawther Ind.
6. 49th Annual Convention
Midtown Hotel, Ermita, Manila , Oct. 15 - 17, 2002
7. 6th Annual Convention, Park hotel, Al Khobar, Saudi Arabia, theme “Integrating Global
Network Towards Progress”, Nov. 22 , 1996
8. 4th PSME-SA Technical Symposium, Al Khobar, KSA with the theme PSME-SA approach
Towards Phil. Reintegration, Park Hotel, July 26, 1996
9. 5th
Annual Convention, theme “Mechanical Engineers Towards Professional
Competence Park Hotel, Al Khobar, Saudi Arabia, Nov. 24, 1995
10. 3rd PSME Technical Symposium at PHILCOSA, Al Khobar, Saudi Arabia “Quality
Management and Quality Assurance, September 1, 1995
11. 4th Annual Convention, “Exchanging Professional Growth through Continuing
Education”, Park Hotel, Dec. 2, 1994
12. 2nd PSME-SA Technical Symposium, Park Hotel, Al Khobar, Saudi Arabia, “Modern
Mechanical Engineering Technology”, August 26, 1994
13. 1st PSME-SA Techincal Symposium “Project Management and Constructions”, Park
Hotel, Al Khobar, Saudi Arabia, May 21, 1993
14. 2nd PSME-SA Annual “Envisage and Action Towards High Technology Development”,
Park Hotel, Al Khobar, Saudi Arabia, Nov. 27, 1992
15. 1st PSME-SA Annual Convention “Support the Newly Industrialized Country, KFUPM,
Dharan, Saudi Arabia, Nov. 29, 1991
16. PSME Management and Technical Seminar, Al Nimran Hotel, Al Khobar, Saudi Arabia,
June 21, 1991, Saudi Arabia conducted by PSME-SA Chapter
17. Group Effective Workshop, Development Academy of the Phils., Quezon City,
Feb. 9 – 11, 1978