MARVIN G. BAYANAY, M.E.
158 V. Sotto St. Brgy. Corazon de Jesus
San Juan City, Philippines
Contact number: +639297964744
Email: bayanaymarvin@yahoo.com
SUMMARY OF WORK EXPERIENCE
I am a registered Mechanical Engineer who pursue my career in Health, Safety, & Environment
management system profession. I have been engaged in Oil and Gas construction in Saudi
Arabia for more than two years at Al Rushaid Construction Co. Ltd.. & EEI Corporation. A joint
venture company between Al Rushaid Construction (KSA) and EEI Corporation (Philippines).
During my college as part of our curriculum (On the Job Training) I worked at Universal Motor
Corporation - NISSAN under the Department of Product Engineering as Documentation, Design
and Audit trainee. Universal Motor Corporation is the largest distributor of NISSAN light
vehicles in the Philippines. Also I worked during my college days to support the financial needs
in Our Lady of Fatima Parish at Bangkal, Makati Philippines as general service assistance.
SKILLS
Oil & Gas Process, Well Heads, Christmas Tree, Separation, Gas Gathering, Gas Storing,
Offshore & Onshore, OSHA 18001:2007, ISO 14001 (Environmental Management System),
Climate Change, Accident/Incident Investigation, Job Safety Analysis, Behavior Base Safety,
Hazard Identification & Analysis, Petrochemical Construction Safety, Microsoft (Word, Excel,
PowerPoint, Visio), AutoCad
EMPLOYMENT HISTORY
Position
Duration
Company
Address
:
:
:
:
HSE Engineer - Documentation
May 23, 2011 – November 25, 2013
Al Rushaid Construction Co. Ltd.. - EEI Corporation
Al Khobar, Kingdom of Saudi Arabia
PROJECT PROFILE: Al Rushaid Construction Co. Ltd.. is the main sub contractor of Worley
Parsons undertake Saudi Aramco Mobile Refinery’s modifications to its Yanbu refinery in the
Kingdom of Saudi Arabia to comply with the 2013 mandatory specifications for gasoline with 10
ppm sulfur, 1% benzene and diesel with 50 ppm. In addition, diesel with 10 ppm of sulfur will
be mandatory by 2016.
Duties & Responsibilities:




Prepare the topics and facilitate toolbox meeting prior to start the work. Explain the topic in
multilingual to ensure that the message are clear and understand by the people especially the
direct labors.
Communicate with the HSSE Area In-charge to get the manpower headcount for the day prior to
begin the work. Headcount is use in the drill scenario or in the actual emergency to easily find
the missing person.
Review the deviation submitted by Area HSSE Engineer /Inspector and ranked it by category.
The final report will submit to HSSE Manager for review and to find the immediate action to
mitigate the hazard to prevent any incident or injury.
Prepare HSSE performance report on weekly and monthly basis. Compare the incident rate versus
the manpower. Update the safety milestone (safe man-hours).













Responsible in the safety programs of HSSE department (Safest Worker, Safest Supervisor,
Safest Group & Safety Slogan Contest) to encourage workers and line supervision to work safely.
Prepare Safety Bulletins, Safety Alert and Campaigns (Stop the Drop, Fire Prevention, Fall
Protection).
Attend HSSE meetings and prepare the minutes of meeting (Core Group, Sub-committee, Food
Committee).
Responsible in safe keeping of HSSE documents. Maintain documents and records are properly
filed, sorted and organized. HSSE documents is needed always in incident investigation and in
revision of HSSE procedures.
Assist in incident investigation. Provide the personal data of person involved in the incident like
date of employment, employment history, age, training attended and safety violations.
Conduct routine inspection inside offices (PMT & FOG) to ensure proper ergonomics are
followed by people working inside the offices (commonly working in the table). To prevent any
musculoskeletal disorder in improper handling and positioning.
Conduct weekly inspection to ensure all emergency exits are clear and free from any obstruction.
Make sure that access ways are dry and no laying cords on the ground to eliminate trip and slip of
workers especially in emergency situations.
Conduct inspection on electrical equipments inside the offices. To ensure that all receptacles are
GFCI operated and all computers are provided with uninterrupted power supply (UPS) and
automatic voltage regulator (AVR). To prevent loss of data during interruption of power supply.
Conduct inspection of fire fighting equipments such as fire extinguisher, smoke detectors,
emergency lights and exit lights. Ensure emergency information posted in all areas (evacuation
route plan, contact numbers, ERT members & emergency flow chart.
Prepare emergency evacuation route plan, update emergency contact numbers and ERT members.
Monitoring the compliance of line supervision in behavior base observation and hazard
identification program.
Design safety signage's required in work area.
Prepare daily, weekly and monthly reports (HSSE ratio, Manpower, HSSE Performance, Incident
Data base, inspection of tools and equipments).
Position
Duration
Company
Address
:
:
:
:
Product Engineer (trainee)
May 2010 - October 2010
Universal Motors Corporation (NISSAN)
Chino Roces Avenue, Makati City, Philippines
Duties & Responsibilities:






In-charge preparing transmittal, letters to the suppliers and all encoding works. Filing of
all documents.
Prepare audit schedule. Coordinate with supplier prior to the schedule of audit.
Conduct audits to suppliers flow of work, quality of work and product and the work area
to ensure safety of workers and good quality of products.
Follow the closure of audit findings. Supplier who did not meet the target schedule of
corrective actions will be given disciplinary actions (removing from the list of suppliers
of NISSAN)
Conduct inspection on the manufacturing area. Ensure all workers are following in the
safety regulation inside the plant. Ensure workers inside the plant are comfortable in the
working environment.
Conduct testing of vehicles to ensure the safety of drivers and passengers prior to sell the
product in the market. (brake test, wheel test, impact test)
Position
Duration
Company
Address
:
:
:
:
General Service Assistance
Year 2004 - Year 2010
Our Lady of Fatima Parish
Bangkal, Makati City
Duties & Responsibilities:





Responsible in all repairs and maintenance inside the Church and the building.
Coordinate with office staff all major repairs for immediate actions.
Monitoring the consumption of water and electricity.
Assist in Parish office in filing of documents and encodings.
Served during the mass as Knights of the Altar.
TRAINING AND SEMINARS
1. INTERNATIONAL OIL & GAS HSE CERTIFICATE - Class DHSV
O3GHSE Training Center and Career Development
Ortigas, Pasig City, Philippines
December 9-13, 2013
Topics:
Decmber 9, 2013
- Basic Oil & Gas Process
- Introduction to Oil Platform, Derrick & Jack-up Rigs
- Basic Water & Gas Injection
- Oil & Gas Separation, Two Phase & Three Phase
- HSEMS Based on OSHAS 18001
- Noise Awareness (Logarithmic Computation & NRR)
December 10, 2013
- Base Foam Injection for Crude Oil Tank
- Christmas Trees (Two Barrier Rule) & Introduction to BOP & DHSV
- Liquefied Natural Gas (LNG) Safety
- Safety Orientation for Offshore Platform Installation
- Basic Pigging Operations
- Fatal Accidents in the Oil & Gas
- Anatomy of Confined Space Fire
December 11, 2013
- Confined Space / Vessel Entry
- Lifting Safety & Color Code of Lifting Gears
- Pipeline Intervention (Hot Tapping, Line Freezing)
- Techniques in Working in Flammable Atmosphere, Safehouse Habitat
- Floating Roof Tank Cleaning
- Propane, BLEVE
- Energy Isolation in the Oil & Gas Installation
December 12, 2013
- Permit To Work System & Compliance Audit
- Hydrogen Sulfide (H2S) Course
- Actual Training on SCBA
- Risk Assessment in the Oil & Gas Production Platform & Well Head Tower
- Compressed Gas Cylinders Safe Distance
- Static Electricity
- Basic Oil Slick Quantification
December 13, 2013
- Personal Protective Equipment (PPE) in the Oil & Gas Industry
- Accident Investigation & Analysis of Works O&G Accidents
- Authorized Gas Tester Course
- Fire Extinguisher Used in the GOSP
- Ozone Depletion and CO2 Emission
- Low Specific Activity / NORM
- MSDS / COSHH
- Onshore Pipeline Construction / Offshore Pipelaying
2. BASIC FIRST AID/LIFE SUPPORT/CPR ACCREDITATION TRAINING
Sameer Ibrahim General Hospital
Yanbu, Kingdom of Saudi Arabia
June 6, 2012
Topics:
- Cardiopulmonary Resuscitation (CPR)
- Bleeding
- Shock
- Heart Attack
- Choking
- Electric Shock
- Eye Injuries
- Burns
- Exposure to Hazardous Materials
- Broken Bones
- Heat Exhaustion
- Heat Stroke
3. BASIC OCCUPATIONAL SAFETY AND HEALTH
EEI Corporation Training Room
Quezon City, Philippines
February 28, 2011 – March 4, 2011
4. TECHNICAL DRAFTING NC II (AUTOCAD TRAINING)
Technical Education & Skills Development Authority (TESDA)
Taguig City, Philipines
November 2010 – December 2010
Topics:
- Participate in Workplace Communication
- Work in Team Environment
- Practice Career Professionalism
- Practice Occupational Health and Safety Procedures
- Perform Mensuration and Calibration
- Interpret Technical Drawings and Plans (apply quality standards)
- Draft Architectural Layout and Details
- Prepare Computer Aided Drawings
5. PROJECT CONSTRUCTION SAFETY TRAINING
Al Rushaid Construction Co. Ltd. – EEI Corporation
Client – Worley Parsons Arabia Ltd.
Yanbu, Kingdom of Saudi Arabia
Topics:
HSSE Orientation
Confined Space Entry & Attendant
Excavation & Trenching Safety
Fire Prevention & Protection
Hand & Power Tools Safety
Heat Stress Management
Hot Works Safety
Job Hazard & Risk Assessment
Basic First Aid
Working at Heights
Self Contained Breathing Apparatus
Rigger Evaluation & Competency
ISO 14001 EMS Awareness
OSHAS 18001: 2007 Awareness
Safety Leadership Training
Manual Handling / LOTO
6. EDCC (Engineering & Development Crash Course)
EEI Corporation
Libis, Quezon City, Philippines
Topics:
- Scientific Approach in the Project Management
- Management by Objectives
- Supervisory Development Program
- Seminar Workshop on Occupational Safety and Health Standards and Enforcement Policy,
Programs and Procedures
- 5 S’ Orientation Seminar
- Basic Occupational safety & Health Training Course
- Safety Leadership Skills Path Training
EDUCATIONAL ATTAINMENT
Tertiary
Bachelor of Science in Mechanical Engineering (BSME)
Rizal Technological University
Mandaluyong City, Philippines
2005 – 2010
Secondary
High School
Lubang Integrated School
Lubang Occidental Mindor
1998 - 2002
Primary
Elementary
Tangal Elementary School
Tangal, Lubang Occidental Mindor
1992-1998
ACHIEVEMENTS
32 Million Safe Man Hours w/o LTI
SAMREF Clean Fuel Project
Yanbu, Kingdom of Saudi Arabia
November 2013
Registered Mechanical Engineer
License No. 74998
Philippines
October 5, 2010
AFFILIATIONS
Philippine Association of Health, Safety & Environment Engineers Working for Oil & Gas
Associate Member (605)
Philippine Society of Mechanical Engineers
Regular Member (86324)
CHARACTER REFERENCES:
RAFAEL F. MENDOZA
Sr. HSSE Manager
Al Rushaid Construction Co. Ltd.
rfmendoza@arcc-eei.com
EDUARDO S. SUBA
HSSE Manager
Al Rushaid Construction Co. Ltd.
essuba@arcc-eei.com
CARMELITO Y. DEL ROSARIO
HSSE Supervisor
Al Rushaid Construction Co. Ltd.
cydelrosario@arcc-eei.com
JON CURTIN
Sr. Safety Specialist
Saudi Arabia Mobil Refinery-Samref
Exxon Mobil Saudi Arabia
Tel #: +9664396476
jonathan.curtin@samref.com.sa
ENGR. RONNIE M. DAGAL
Chief Executive Officer
O3GHSE Training Center and Career Development
Tel #: +639283222737 (Philippines)
Tel #: +6325700116 (Philippines)
Tel #: +971507714765 (UAE)
ronnie_dagal@hotmail.com
Carmelo Palaña
HSSE Supervisor
Hyundai Engineering Co. Ltd.
MGP Project Musandam Oman
palanacarmelo@yahoo.com
I hereby certify that the above information stated in this document is true and correct to the best
of my knowledge and belief.
Engr. Marvin G. Bayanay
HSSE Engineer