Curriculum Vitae (CV)
COMMISSIONING ENGINEER
(14 years in Experience)
A. PERSONAL DETAILS
Name
: MAMAY HENDRAYANA
Date of Birth
: Bandung (Indonesia), 13 May 1975.
Passport No.
: U875547 (Date of Expiration:16/6/2015).
Resident Address
: (1) Jl. Gereja No. 1077, RT09/RW03, Pringkumpul,
Pringsewu Selatan, Kab. Pringsewu, Lampung-35373, Indonesia.
Phone : +62 729 24 1 39
(2) Toko Mas Sepakat, Jl. Kesehatan No.1, PasarPringsewu,
Kab.Pringsewu, Lampung-35373, Indonesia.
Phone : +62 729 21 410
Mobile Phone
Sex
: (+62) 81387296978
: Male
Nationality
: Indonesian
Marital Status
: Married
E-mail
: mr_mamay@yahoo.com
B. LATEST EDUCATION
Bachelor Graduate inINSTRUMENTATION PHYSICS,InstitutTeknologi Bandung (ITB),
Indonesia(1993-1998).
C. EXPERTISE QUALIFICATION
Having 14 years of extensive experience in the field of Instrument & Control System at Oil &
Gas and Petrochemical industrieson fully stages of Conceptual Design, FEED, Detail
Engineering Design, Construction, Commissioning, Start-Up and Production/Maintenance in
the best possible condition for optimal production & safety at Onshore and Offshore.
Page 1 of 10
EXPERIENCE IN FIELD/PANEL INSTRUMENTS
-
Transmitter(Flow,Level,Temperature,Pressure), Recorder, Converter, Indicator, Limit
Switch, Manifold, flange, and various of valves (SDV, BDV, ASV, FSV, PCV, FCV,
LCV,Choke Valve, Hand Valve,and Oil Well Christmas Tree).
-
Process Analyzer: Gas Chromatograph, Moisture, Hydrocarbon Dewpoint, Conductivity,
pH, O2/NH3/CO analyzer, Residual Chlorine, Total Organic Carbon (TOC).
-
Fire & Gas Systems: Open Path Gas Detector, Flame Detector, Smoke Detector, High
Sensitive Smoke Detector (HSSD), Heat Detector, Fog Detector, Fusible Loops, and Fire
Water Deluge System, Fire Damper, Smoke Damper, and Refrigerant Detector.
-
Instrument/Package Communication: Foundation FieldBus-H1/H2, ProfiBus-PA/DP,
ControlNETand HART.
-
Field Instrument Tools: Emerson-375/475, Yokogawa (BT) 200, and BeaMex MC5.
-
Instrument Calibration at Site & Laboratory base on ISO 17025.
-
International Codes & Standards: ISO, NAMUR, ANSI/ISA, and IEC.
-
I&E for Inspection& Installation in Hazardous Area (Ex-Register).
EXPERIENCE IN PROCES CONTROL SYSTEM
-
Distributed Control System (DCS): Yokogawa Centum VP/CS1000/3000; ABB Industrial IT
800xA,Siemens Simatic PCS7, and SupConWebField ECS100.
-
Plant Information Management Systems (PIMS): Yokogawa PRM&ExaQuantum.
-
Vibration Monitoring System (VMS):Bently Nevada 3500 series (System-1).
-
ESD and F&G System:Triconex-TMR 1131 (#8902)& Yokogawa ProSafe-RS v2.
-
PLC:Allen Bradley RSLogix5000, SIEMENS Simatic S7-400.
-
OLE Process Control (OPC) Network System (DA/HDA/A&E/DX/XML) and System
Integration OPC System (SIOS).
-
Instrument Calculation Software: InstruCalc.
EXPERIENCE IN ENGINEERINGDESIGN
To Generate & ReviewPiping &Instrument Diagram (P&ID), Operational Test Procedure
(OTP) for HC & NHC, Standard Operation Procedure (SOP), Single Line Diagram, Process
Flow Diagram, Instrument Calculation,Instrument Data Sheet, Instrument Check/Test
Sheet,Inspection Test Record, Instrument Connection Diagram, Alarm/Trip Summary,
Instrument Hookups, Instrument JB/Marshaling termination& Schedule, Internal Panel
Wiring diagram, Logic Diagram, and Cause&Effect Matrix for ESD and F&G.
Page 2 of 10
EXPERIENCE IN SYSTEM PACKAGE
Gas Turbine Generator (SOLAR Turbine), Gas Turbine Compressor (SOLAR Mars100/Taurus-60/Centaur-40/Saturn-10), Emergency Diesel Generator (McPEC), Black Start
Diesel Generator (McPEC), Nitrogen Regeneration, Mono Ethylene Glycol, Steam
Turbine Generator (SIEMENS), Boiler System (Macchi), Flare System, Instrument Air
Compressor (Atlas Copco), Gas Metering System (ElsterInstromet), Hydraulic Power Unit
(WilMax), HVAC (AiCool), Fire Water& Deluge System,Potable Water, Control System
(Yokogawa/SIEMENS/Invensys/GE), and Marine Telecommunication System (Radio
Holland).
D. PROFESSIONAL CERTIFICATION IN TRAINING
OVERSEAS TRAININGS

I&E Comp-Ex Competence based in Hazardous Area, ATTS, Singapore, 2011.

Foundation Field Bus Engineering& Configuration, Yokogawa, Saudi Arabia, 2008.

TriconTristationTS1131 Comprehensive Course (#8902),Triconex, Saudi Arabia, 2008.

TriconTristationTS1131 Engineering, Configuration & Application (#8902), Invensys, Saudi
Arabia, 2008.

Machine Monitoring System (MMS) 3500, Bently Nevada, Saudi Arabia, 2008.

Electrical Measurement, Japan Electric Meters Inspection Corporation (JEMIC), TokyoJapan, 2006.

Instrument Integration & Testing, Precession Instrument Development Centre (PIDC),
Hsincu-Taiwan,2003.
LOCAL TRAININGS

Tropical Basic Offshore Safety Induction & Emergency Training (5501-TBOSIET), M&O
Indonesia (OPITO certified), Batam, 2010.

Yokogawa ExaQuantum, Yokogawa Jakarta, 2007.

Industrial Process Control, Yokogawa, Jakarta, 2007.

Advanced Operation & Monitoring for Boiler Plant (Tuning PID), Yokogawa, Jakarta,
2007.

Yokogawa ProSafe-RS v2: Safety Instrumented System (SIS), Yokogawa, Jakarta, 2006.

DCS Centum CS3000 in Operation, Maintenance &Engineering, Yokogawa, Jakarta,
2006.

Fundamental of Yokogawa STARDOM. Yokogawa, Jakarta, 2006.

Introduction for Yokogawa PLC FA-M3 in Configuration. Yokogawa, Jakarta, 2006.

Calibration & Measurement for Electrical devices, Indonesian Sciences Institute (KIMLIPI), Serpong, 2004.

Preparation of accreditation for Testing & Calibration Laboratory, Indonesian Sciences
Institute (KIM-LIPI), Serpong, 2002.
Page 3 of 10

The method for Research & Data Processing, Indonesian Sciences Institute (KIM-LIPI),
Jakarta, 2002.

Uncertainty in Measurement, Indonesian Sciences Institute (KIM-LIPI), Serpong, 2000.
E. EMPLOYMENT RECORD
Company Name
: PT. SinggarMulia,Jakarta-Indonesia.
Business Line
: Oil&Gas Engineering Consultant Company
Period
: Jan 2012 – Present.
Position Held
: Senior/Lead Instrument& ControlSystem Engineer.
Employee Status
: Direct Hire, Permanent.
Description of Duties
:

Performing preliminary engineering to develop P&ID,
Instrument Calculation, hook up drawings, logic &
schematic drawings, detailconstruction drawings,
location plan, cable lay out, cable schedule, Instrument
termination, and material take off.

Review, comments, and approves vendor drawings for
instrumentation & control equipment and
submitappropriate recommendation to the clients.

Support project engineers to finalizedmanhour estimation,
Scope of work, Master Deliverables Register (MDR),
Instrument Document completion, Site observation, and
target project completion as necessary.

Generate instrument philosophy, Instrument/Cable
schedule, instrument specification, Instrument datasheet,
Instrument calculation, Instrument list,instrument
management activity as per project requirement.

Participate in HAZOP & HAZID activity as per project
requirements.
Assignment in Projects:
(1) As Lead of Instrument Engineers & Designers for Detail Engineering Design ofMaleo
Booster Compressor Project (SOLAR Taurus-60) for SANTOS (Madura Offshore) Pty
Ltd.
(2) As Lead of Instrument Engineers & Designers for Pre-FEED & FEED (On-Skid & Off-Skid)
of Foxtrot Compressor Retrofit System Up-Grading Project (SOLAR Centaur & Saturn)
forPT. PERTAMINA HULU ENERGI – OFFSHORE NORTH WEST JAVA.
(3) As Lead of Instrument Engineers & Designers for Pre-FEED & FEED of FSB Field
development project for PT. PERTAMINA HULU ENERGI – OFFSHORE NORTH WEST
JAVA
(4) As Project Leadfor Pre-FEED & FEED of Fire & Gas System Bravo development project
for PT. PERTAMINA HULU ENERGI – OFFSHORE NORTH WEST JAVA.
Page 4 of 10
(5) As Project Lead for Pre-FEED & FEED of Foxtrot NUI Remote Monitoring Project for PT.
PERTAMINA HULU ENERGI – OFFSHORE NORTH WEST JAVA.
(6) As Project Lead for Pre-FEED & FEED of Control Valve Sizing & Standard Hook-Up
Project for PT. PERTAMINA HULU ENERGI – OFFSHORE NORTH WEST JAVA.
(7) As Lead of Instrument Engineers & Designers for FEED of Fire Water System
Upgrading project for PT. PERTAMINA HULU ENERGI – OFFSHORE NORTH WEST JAVA
Company Name
: Premier-Oil,Natuna Sea-Indonesia.
Business Line
: Oil & GasCompany
Period
: Jun2010 – Dec 2011.
Position Held
: LeadInstrument Commissioning Engineer
Employee Status
: Indirect Hire (MPS: PT. SinggarMulia), Contract
Description of Duties
:

Review detail engineering designs include P&ID, PFD, SLD,
Instrumentation Layout/Connection Diagram, Instrument
Data Sheet,Job Risk Assessment, Logic Diagram, Cause &
Effect Matrix for ESD/F&G, SAT/Commissioning/StartUp
Procedures, Operational Test Procedure (OTP) for
HydroCarbon & Non-HydroCarbon forWellhead Platform
(WHP) & Central Processing Platform (CPP), and Living
Quarter (LQ).

Supervising Instrument Hook-Up, Instrument&
ElectricalInspection, Functional Test, Loop-Check, Closing
Punch List, and approving certain completion documents
for SAT/Commissioning/Start-Up phases.

Responsible for Pre-Commissioning/Commissioning/StartUp activities for all instrumentation and certain System
Packages during Offshore& Onshore activities.

Assistin Pre-Commissioning/Constructionactivities in
Instrument inspection & installation, and assisting
contractors for reviewing &closingpunchlists.

Assist in troubleshooting duringGas Exportingto Singapore.
Assignment in Project:
(1). Gajah Baru Project at Natuna Sea-Indonesia for Well Head Platform (WHP), Central
Processing Platform (CPP), and Living Quarter (LQ).
Involved in Inspection, Testing, Start-Up &TroubleShootingfor :
1. Gas Turbine Generator (GTG) Taurus-60& Gas Turbine Compressor (GTC) Mars-100
(with MAN Turbo compressor)Package by Solar Turbine.
2. Emergency Diesel Generator (EDG)& Black Start Diesel Generator (BDG) package
by McPEC.
Page 5 of 10
3. Instrument Air Compressor package by Atlas Copco.
4. ElsterGas Metering System : FlowComputer (FC) 2000 + Allen Bradley PLC + GC +
Moisture + HydroCarbonDew Point Analyzer + UltraSonic Meter
5. Pedestal Crane package by Favco.
6. Fire SuppressionSystem by ANSUL.
7. Heating Ventilating & Air Conditioning (HVAC) package by AiCool.
8. F&G Detector (Heat/Flame/Smoke/Fog/Gas) by Det-tronics.
9. Field Instruments(Flow/Level/Pressure/Temperature) with HART protocols by
Yokogawa& Rosemount.
10. Yokogawa’s Integrated Control System (ICS) : DCS Centum-VP, Plant Resource
Manager (PRM), Plant Information Management System (ExaQuantum), Emergency
Shutdown System (ESD/F&G) ProSafe-RS, and Alarm Management System (IMAC).
11. Hydraulic Power Unit (HPU) package by Wilmax.
12. Telecommunication System package (CCTV/VSAT/PAGA/Radio-VHF/VOX/UHF) by
Radio Holland-Singapore.
Company Name
: PT. South Pacific Viscose (Lenzing Group-Austria), Indonesia.
Business Line
: Petrochemical Company
Period
: Jan - Jun 2010
Position Held
: Deputy Manager of Instrument Engineering.
Employee Status
: Direct Hire, Permanent.
Description of Duties
:

Evaluates proposals from instrumentation & control
equipment suppliers and prepare recommendation and
for the proper suppliers.

Evaluate the technical feasibility of proposed project and
determine the optimum conceptual design for the
project considering Health, Safety and Environmental
(HSE) aspect.

Review & approve detail specification and material
requisition for all instrumentation and control equipment
such as control valve, safety relief valve, orifice plate,
pressure instruments, level instruments, flow instruments,
temperature instruments, control panel, and other
instruments.

LeadingInstruments Maintenance & Project jobs at
Auxiliary Plants (CS2Plant, Acid Plant, Demineralization
Plant, Water Treatment Plant, Waste Water Treatment
Plant, CS2Adsorption Plant, Waste Sulfuric Acid,
NaturalGas Base CS2 Plant).

Give technical assistance during construction,
Page 6 of 10
commissioning, and start up.
Assignment in Project:
(1). Natural Gas Base CS2 (NGBC) Plant& Power Plant as part of Auxiliary Plant.
EMPLOYER
: Yanbu National Petrochemical Co. (YANSAB), Saudi Arabia.
Business Line
: PetrochemicalCompany
Period
:Jun 2007 –Jun 2009
Position Held
: Sr. Instrument & Control System Specialist.
Employee Status
: Direct Hire, Contract.
Description of Duties
:

Leading SAT, ISAT, Loop-Checking, Functional Test,
Pre/Commissioning, and Start-Upfor U&O plant (Storage
area, Steam, BFW, Condensate, Compressor, Water
System, Fuel System, Fire Water System, Waste Water
System, Cooling Water System, STG, Flare & Incinerator).

LeadinginConfiguration, Troubleshooting& Modification
of Hardware & Software on DCS Yokogawa Centum
CS3000R308, Triconex on ESD&FGS, MMS Bently Nevada
3500, Plant Resource Manager (PRM), Plant Information
Management System (ExaQuantum), Siemens Simatic
PCS7, and various of Field/Panel Instruments (FF & HART
protocols) duringFunctional Test, Commissioning, Start-Up,
and Normal Operation activities.

Leading on Configuration & Troubleshooting for more
than 800 transmitters, Indicators & Valves (HART &FieldBus)
which supplied by Yokogawa, Rosemount,
Endress+Hauser, Fisher, Siemens AG, etc.

Approving different documents such as Instrument Data
Sheet, SAT&ISAT procedures, loop folder, functional test
folder with comparing to standards followed by Foster
Wheeler and SABIC for Yanbu National Petrochemical
Company (YANSAB).
Assignment in Project:
Utilities & Offsite (U&O) and Olefins Plants as part of Yanbu National Petrochemical
Complex Projects.
Page 7 of 10
Directly involved in Inspection, Testing, Start-Up &TroubleShootingfor :
1. Centrifugal Air Compressor package by FS-Elliot.
2. Boiler System package by Macchi.
3. Steam Turbine Generator (STG) package by SIEMENS.
4. Process Control Instruments (Transmitter/Valve/Indicator/Converter/Recorder)
supplied by Yokogawa, Rosemount, Yokogawa Electric, Siemens-AG, Vega
Grieshaber, Yamatake, Honeywell, Krohne, Endress+Hauser, Fisher, ABB, Brooks,
Krohne, Masoneilan, and Micromotion.
5. Yokogawa ICS system: DCS yokogawa Centum CS3000 R3.04, Plant Resource
Manager (PRM), Plant Information Management System (ExaQuantum).
6. Shutdown System for ESD/F&G/HIPPS supplied by Triconex-TMR.
7. Machine Monitoring System (MMS) 3500 series supplied by Bently Nevada.
8. Circuit Monitoring & Data Acquisition (CMADA) CM3000 system.
EMPLOYER
: PT. Yokogawa Indonesia, Indonesia.
Business Line
: Oil & Gas Engineering/ServiceCompany
Period
: May 2005 –Jul 2007
Position Held
: Sr. Instrument Service Engineer.
Employee Status
Description of Duties
: Direct Hire, Permanent.
:

Carried out new installations, loop testing and debugging
processes, and commissioning for Yokogawa products
such as Field Instruments (Transmitter, Valve, Recorder,
Indicator, and Calibrator),Yokogawa DCS (Centum
CS1000/CS3000), Yokogawa Safety Instrumented System
(ProSafe-RS), Plant Asset Management System (PRM), and
Plant Information Management System (ExaQuantum) as
per established engineering scope of work and drawings.

Carried out the daily service for clients such as Lab
calibration, Parts Replacement, Phone/Remote
Maintenance Support, managed the service document
& service tools.

Carried out the maintenance project to the clients such
as Start-Up, Commissioning, Site Calibration, Preventive
Maintenance, Shutdown Maintenance, FAT, IFAT, SAT,
ISAT and provides 24-hours Emergency Service.

Conduct customer training & technical consultation at
office or directly on site in the field of Instrumentation &
Control System Engineering Course.

Drawing interpretation for site installation such as P&ID,
location drawing, layout drawing, etc.
Page 8 of 10
Assignment in Project:
1. Engineering Modificationof LNG plant for Nigerian National Petroleum
Company.
2. Maintenance Services (Shutdown, Preventive, Troubleshooting) for National
Companies such as at PT. Komoda Indonesia, PT. Chandra Asri Petrochemical
Indonesia,PT. TIFIKO, Tbk; PT. Asahimas Chemical Indonesia; PT.
EcogreenOleoChemicals Indonesia; PT. Mitsubishi Chemical PET Indonesia; PT.
NGK Ceramics Indonesia; PT. Nippon Shokubai Indonesia (NSI); PT. Polysindo Eka
Perkasa (Texmaco), etc.
3. Training Services in Yokogawa’s Integrated Control System (DCS/ESD/F&G) and
Field Instrument forPetrochemical Plant, Oil&Gas Plant, Powerplantcompanies
such as: PT. Chevron Pacific Indonesia, PT. Arun NGL, British Petroleum (BP)
Tangguh, PT. Pertamina, PT. Chandra Asri, PT. Perusahaan Listrik Negara (PLN),
etc.
4. Field Instrument Service for Installation, Inspection, Calibration, Configuration,
and TroubleShootingfor Recorder, Transmitter, Valve& setting up process
parameters as per Client’s requirements.
EMPLOYER
: PuslitKIM-LIPI, Indonesia.
Business Line
:Instrumentation & Metrology Development
Period
: Jan 1999 – Jan 2005
Position Held
: Instrument & Electrical Engineer
Employee Status
: Direct Hire, Permanent.
Description of Duties
:

Analyses, investigate, troubleshoot and repairs or takes
preventive & corrective maintenance action on the
instruments & equipment problem and failures.

Carried Out the research development in Automation &
Control particularly for Electrical Measurement (AC/DC)
based on PC interface through GPIB communication
card which supplied by National Instrument (NI)
company.

Prepare & review of all PLC/automation system
engineering documents such as System
Architecture/Configurations, Loop wiring/internal wiring
diagram, Logic Diagram, Cable Schedule and Panel
Layout.

Providing Maintenance Service for National companies in
Electrical/Vibration/Pressure/Temperature units.
Page 9 of 10

Carried out the International Project Collaboration in
Instrument& Control System with Japan & Taiwan.

To perform verification of all typical instrumentation in
field and functional test of all instrument equipment within
the scope.
EMPLOYER
:ENGINEERING OUTSOURCING (Freelance)
Business Line
:Engineering/Maintenance Service.
Period
: May 1998 – Jan 1999
Position Held
:Instrument Engineer
Description of Duties
:

Prepare man-hour estimates, budgetary quotations and
list of deliverables for proposals and projects.

Ensure technical adequacy of engineering and design
consistent with economy, good engineering practice,
safety in design and specific requirements of the project.

Prepare datasheets/specifications for various Instruments
like-Transmitters, Control valves, Relief valves, Gas
chromatographs, Analyzers, Control Systems, Fire and
Gas Systems etc.

Performing for Installation of tubing, cable tray, cable
glanding& termination of cable to junction box and to
instruments, cable pulling, tracking of electrical &
instrumentation works.

Drawing interpretation for site installation: P&ID, PDMS,
location drawing, layout drawing and etc.

Provide Training Course of DCS & Field Instruments for
National Petrochemical and Oil&Gas companies.
F. RECOMMENDATIONS/REFERENCES
(1) Mr. WahyuKristowo, Commissioning Coordinator, Chevron-IDD.
e-Mail: Wahyu.kristowo@chevron.com, Mobile: +62 8112647072.
(2) Mr. Rudolf F. Tokoh, Technical Operation Specialist, Premier-Oil Indonesia Ltd,
e-Mail: Rtokoh@PREMIER-OIL.com, Mobile: +62 81380070088.
(3) Mr. PujiSulistyono,Lead Instrument Engineer,SANTOSPty Ltd.
e-Mail:Puji.Sulistyono@santos.com, Mobile: +62 8161475996
Page 10 of 10