Adela Technology
Company Presentation
Introduction
•
Shenzhen Adela was established in 2008 , major in fiber optical cable . After
many years of development , we provide quality products to many many
telecom companies for backbone network ,metropolitan area network and
FTTx applications .
•
Providing the best solution and service is our prior goal. The best solution we have a senior engineer team who are experiences in up to date
technology; Service - we are always ready to provide our best possible
service to our customer and guarantee them with great satisfaction while
constantly seeking to enable technologies and solutions to help our
customers to cope with changing environment and requirements.
•
We wish to help you staying competitive by constant innovation and
suitable design. Sincerely wish we can work with you and develop together
in this dynamic world.
Development experience
2008
Establis
hed
2012
Develop
ADSS
cable
2009
cable up
to 144
fiber
2013
Develop
micro
tube
cable
2010
cable up
to 288
fiber
2014
Develop
New
Techn
ology...
Product Category
1. Aerial cables
2. Building cables
3. Direct buried cables
4. Drop cables
5. Duct cables
6. Micro-duct cables
Our Product - Aerial cables
1. Figure 8 central loose tube self-supporting Non
metallic tape cable (GYXTC8Y)
2. Figure 8 central loose tube self-supporting with
steel tape cable (GYXTC8S)
3. Loose tube figure 8 self-supporting cable
(GYTC8S)
4. All Dielectric Self-supporting Aerial Cable
(ADSS)
Figure 8 central loose tube Non-metallic tape cable (GYXTC8Y)
Characteristics:
1. Stainless steel or gaivanized steel
self-supporting.
2. Central loose tubes with jelly
compound inside to protect the cladding
fiber
3. The cross-section in figure 8 shape
4. Up to 24 fibers
Application:
1. Outdoor, Long distance and local area
network communication.
2. Self-support aerial installation.
Standards:
IEC 61754; TIA/EIA 604-5
Figure 8 central loose tube self-supporting with steel tape cable (GYXTC8S)
Characteristics:
1. Stainless steel or gaivanized steel selfsupporting.
2. Central loose tubes with jelly compound
inside to protect the cladding fiber
3. Corrugated steel tape laminated with
plastic at both sides bonding to PE sheath.
4. The cross-section in figure 8 shape
5. Up to 24 fibers
Application:
1. Long distance and local area network
communication.
2. Self-support aerial installation, decrease
cost.
Standards:
IEC 61754; TIA/EIA 604-5
Loose tube figure 8 self-supporting cable (GYTC8S)
Characteristics:
1. Stainless steel or gaivanized steel selfsupporting.
2. Loose tubes with jelly compound inside to
protect the cladding fiber
3. Corrugated steel tape laminated with
plastic at both sides bonding to PE sheath.
4. The cross-section in figure 8 shape.
5. Up to 144 fibers
Application:
1. Outdoor, Long distance and local area
network communication.
2. Self-support aerial installation.
Standards:
IEC 61754; TIA/EIA 604-5
All Dielectric Self-supporting Aerial Cable (ADSS)
Characteristics:
1. Small cable Dia, light weight, 500m span, low
attached load on tower.
2. Non-metal structure, good insulation, antithunder.
3. Fine production technology, even force for
aramid fiber, with superior stress flexibility.
4. Anti gun fire and electro-corrosion. Adapt for
bad climate.
5. May construct without power cut, a power line
failure doesn’t influence cable’s normal transfer.
6. Loose cover GYTA cable core, non-metallic
core reinforced.
7. Tension units are elastic modulus aramid fiber.
8. Electric trace resistant outer sheath is adopted
to run safely under a circumstance of space
electric field (E) ≤25KV/m.
Application:
1. Erect on the same pole with power line in new
and old power line.
2. A long span.
3. Areas of strong electric field, multi-thunder, etc.
Our Product - Building cables
1. Central Loose Tube Outdoor Cable (GYXTW)
2. Central Tube Non-metallic armored Cable (GYFXTY)
3. Loose Tube Non-metallic armored Cable (GYFTY)
4. Loose tube stranded cable with steel tape (GYTS)
5. Loose tube stranded cable with aluminum tape (GYTA)
6. Simplex drop cable
7. Duplex drop cable
8. Indoor mini break out cable
9. Indoor mini break out cable (2-48 core)
Central Loose Tube Outdoor Cable (GYXTW)
Characteristics:
1. The two parallel round steel wires
enhance tensile strength and crush
resistance.
2. Excellent mechanical and environmental
performance.
3. Small outer diameter, lightweight, tight
structure, excellent bending property and
suitable to installation and operation.
4. Up to 24 fibers
Application:
1. Long distance and local area network
communication.
2. Suitable for aerial. pipeline laying
method.
Standards:
IEC 61754; TIA/EIA 604-5
Central Tube Non-metallic armored Cable (GYFXTY)
Characteristics:
1. Non-metal strength member.
2 Filler protect loose tube fiber.
3. Non-metal strength has an excellent
anti-electromagnet ability
4. Up to 24 fibers
Application:
1. Adapted to Outdoor distribution.
2. Access network and local network in
high electromagnetic interfering
places.
3. Adapted to trunk power transmission
system.
Standards:
IEC 61754; TIA/EIA 604-5
Loose Tube Non-metallic armored Cable (GYFTY)
Characteristics:
1. Non-metal strength member.
2. Filler protect loose tube fiber.
3. Non-metal strength has an excellent
anti-electromagnet ability.
4. Up to 288 fibers
Application:
1. Adapted to Outdoor distribution.
2. Access network and local network in
high electromagnetic interfering places.
3. Adapted to trunk power transmission
system.
Standards:
IEC 61754; TIA/EIA 604-5
Loose tube stranded cable with steel tape (GYTS)
Characteristics:
1. Loose tubes (or some fillers) standed
around the metal central strength member.
2. Bound by corrugated longitudinal steel
tape with outer PE jacket.
3. The tube is made of good temperature
property material.
4. Good moisture-resistance and ultra violet
radiation resistant property.
5. Up to 288 fibers
Application:
1. Adapted to Outdoor distribution.
2. Long distance and local area network
communication.
3. Suitable for aerial .pipeline laying method.
Standards:
IEC 61754; TIA/EIA 604-5
Loose tube stranded cable with aluminum tape (GYTA)
Characteristics:
1. Loose tubes (or some fillers) stranded around
the metallic central strength member.
2. Tubes are stranded around the central strength
member into a compact and circular cable core.
3. An aluminum polyethylene laminate is applied
around the cable core and further sheathed
with high density polyethylene.
4. Good moisture-resistance and ultra violet
radiation resistant property.
5. Up to 288 fibers
Application:
1. Adapted to Outdoor distribution.
2. Long distance and local area network
communication.
3. Suitable for aerial .pipeline laying method.
Standards:
IEC 61754; TIA/EIA 604-5
Simplex drop cable
Characteristics:
1. High strength yarn member.
2. Small outer diameter, lightweight, flameretardant, soft and easy to strip
3. High quality tight buffered or loose tube.
4. O.D. 1.4mm-4.0mm avaiable
5. Easy bending fiber G657A
Application:
1. As building to building connecting cable.
2. As indoor soft cable along the wall,
ceiling, between layers and in conduits.
3. As pigtails, movable, connectors and
patch cord for communication equipment.
Standards:
IEC 61754; TIA/EIA 604-5
Duplex drop cable
Characteristics:
1. High strength aramid yarn member.
2. Small outer diameter, lightweight, flameretardant, soft and easy to strip
3. High quality tight buffered or loose tube.
4. O.D. 1.4mm-3.0mm avaiable
5. Easy bending fiber G657A
Application:
1. As building to building connecting cable.
2. As indoor soft cable along the wall, ceiling,
between layers and in conduits.
3. As pigtails, movable, connectors and
patch cord for communication equipment.
Standards:
IEC 61754; TIA/EIA 604-5
Indoor mini break out cable (12~144 core)
Characteristics:
1. Composed of 6 units of multi-core buffered
cables SZ stranded around the central strength
member, each unit has independent strength
member and jacket.
2. Easy splicing, suitable for large capacity data
transmission.
3. Outer jacket’s color varies according to the
types of optical fibers(indoor use),black color is
recommended for outdoor use.
4. Up to 144 fibers
5. Easy bending fiber G657A
Application:
1. For indoor cabling, as fan-out cable.
2. Can be used as lead cable into buildings.
Standards:
IEC 61754; TIA/EIA 604-5
Indoor mini break out cable (2-48 core)
Characteristics:
1. High strength yarn member ensures high tensile
strength and long term stability in transmission.
2. Small outer diameter, lightweight, flameretardant, soft and easy to strip
3. Direct splicing between tight buffered cable and
need no tie-in box or pigtail.
4. Suitable for installation, operation and convenient
for maintenance.
5. Up to 48 fibers
6. Easy bending fiber G657A
Application:
1. As building to building connecting cable.
2. As indoor soft cable along the wall, ceiling,
between layers and in conduits.
3. As pigtails, movable, connectors and patch cord
for communication equipment.
Standards:
IEC 61754; TIA/EIA 604-5
Our Product - Direct buried cables
• Double sheathed with steel tape armored
loose tube cable (GYTY53)
• Double sheathed with metal-free tape
armored loose tube cable (GYFTY53)
Double sheathed with metal-free armored loose tube cable (GYFTY53)
Characteristics:
1. FRP strength. Filler protect tube fiber.
Steel tape armored.
2. Good ultra violet radiation resistant
property.
3. Double sheath .Good moistureresistance.
4. Up to 144 fibers
Application:
1. Adapted to Outdoor distribution.
2. Long distance and local area network
communication.
3. Suitable for aerial, duct and buried
method.
Standards:
IEC 61754; TIA/EIA 604-5
Double sheathed with steel tape armored loose tube cable (GYTY53)
Characteristics:
1. Steel wire strength. Filler protect tube
fiber. Steel tape armored.
2. Good ultra violet radiation resistant
property.
3. Double sheath .Good moistureresistance.
4. Up to 144 fibers
Application:
1. Adapted to Outdoor distribution.
2. Long distance and local area network
communication.
3. Suitable for aerial, duct and buried
method
Standards:
IEC 61754; TIA/EIA 604-5
Our Product - Duct cables
• Loose tube stranded cable with steel tape
(GYTS)
• Loose tube stranded cable with aluminum
tape (GYTA)
Loose tube stranded cable with steel tape (GYTS)
Characteristics:
1. Loose tubes (or some fillers) standed around
the metal central strength member.
2. Bound by corrugated longitudinal steel tape with
outer PE jacket.
3. The tube is made of good temperature property
material.
4. Good moisture-resistance and ultra violet
radiation resistant property.
5. Up to 288 fibers
Application:
1. Adapted to Outdoor distribution.
2. Long distance and local area network
communication.
3. Suitable for aerial .pipeline laying method.
Standards:
IEC 61754; TIA/EIA 604-5
Loose tube stranded cable with aluminum tape (GYTA)
Characteristics:
1. Loose tubes (or some fills) stranded around
the metallic central strength member.
2. Tubes are stranded around the central
strength member into a compact and circular
cable core.
3. An aluminum polyethylene laminate is
applied around the cable core and further
sheathed with high density polyethylene .
4. Good moisture-resistance and ultra violet
radiation resistant property.
5. Up to 288 fibers
Application:
1. Adapted to Outdoor distribution.
2. Long distance and local area network
communication.
3. Suitable for aerial .pipeline laying method.
Standards:
IEC 61754; TIA/EIA 604-5
Innovation and Design
Thanks!