WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
SPRING SEMESTER 2011
COURSE SYLLABUS
Instructor: Jim Meyers
Email:
meyersj7@wnc.edu
Recommended prerequisites: None
Course Description:
Teaches those concepts required by mechanical engineering, machine shops and
welding industries. Students will begin with simple prints and proceed to more
advanced prints.
Overall Course Objective:
The student will demonstrate an ability to read, interpret & explain blueprints used by
mechanical engineers, machine shops & welding shops.
Text:
Interpreting Engineering Drawings, 7th Edition, by Jensen & Helsel.
Credits: 3
Transferability:
Courses with a “B” designator after the number (such as DFT 110B) are college level
courses which may apply to a WNC degree, but which may not transfer to UNR and
UNLV. In some cases, these courses may transfer to other Nevada community
colleges or to out-of-state colleges and universities.
Linkage to educational program mission and outcomes:
This course is one of the core requirements for an AAS in Drafting Technology for all
emphases. It is designed to prepare students for CADD 100.
* If you have a disability for which you will need to request accommodations, please
contact the Disability Support Services office (Bristlecone building, Room 103; 4453275) as soon as possible to arrange for appropriate accommodations.
03/16/16
1
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
SPRING 2011 – LECTURE & ASSIGNMENT SCHEDULE
Chapter numbers given, refer to the text listed on page one of the syllabus and are
given so the student can read the chapter before class. Reading and studying the
material ahead of class will greatly enhance the learning process. Some topics will take
more than one class time.
LECTURE TOPICS MAY BE ADJUSTED OR REARRANGED AS NEEDED
Course competencies are represented by the lecture topics as listed below.
Week One:
January 26, 2011
Read: Units 1, 2, 3, & 4
Topics:
Syllabus and overview of course
Alphabet of Lines
Multiview Drawings
Abbreviations &Title Blocks
Working Drawings
Assignments:
No. 1 - Handout
Due: February 2, 2011
Week Two:
Topics:
February 2, 2011
Read: Units 5 & 6
Dimensioning practices
Inclined Surfaces
Angles & Slots
No. 2 – p.44
Assignments:
No. 3 – p.43
Due: February 9, 2011
No. 4 – p.54-55
Week Three:
Topics:
Read: Units 5 & 8
Circular & Cylindrical features
Rounds & Fillets
Machining symbols
Revisions
Breaks
Assignments:
03/16/16
February 9, 2011
No. 5 – p.45
No. 6 – p.74-75
Due: February 16, 2011
2
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
Week Four:
Topics:
February 16, 2011
Sectional Views
Symbols
Machining symbols
Hole notes
Chamfers
Undercuts
Tapers
Knurls
No. 7 – p.86-87
Assignments:
No. 8 – p.100-101
Week Five:
Topics:
February 23, 2011
Week Six:
No. 10A – p.120, fig. 1-3
March 2, 2011
Due: March 2, 2011
Read: Units 13 (cont.) & 14
Tolerances & Allowances (cont.)
Inch Fits and Allowances
Week Seven:
No. 10B – p.120, fig. 4-6
No. 11 – p. 227
March 9, 2011
Due: March 9, 2011
Read: Units 15 & 16
Metric Fits and Allowances
Threaded Fasteners
Assignments:
03/16/16
Read: Units 12 & 13
No. 9 – p.86-87
Assignments:
Topics:
Due: February 23, 2011
Surface texture
Symbols
Tolerances & Allowances
Methods
Assignments:
Topics:
Read: Units 9, 10 & 11
No. 12 – p. 138-139
Due: March 16, 2011
No. 13 – p. 150-151
3
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
Week Eight:
March 16, 2011
Read:
Topics:
Review for MIDTERM Exam
MIDTERM EXAM
Assignments:
Week Nine:
March 23, 2011
Due:
Read:
SPRING BREAK – NO CLASS
Due:
Assignments:
Week Ten:
Topics:
March 30, 2011
Read: Units 17 & 18
Sections (cont.)
Keys
Coordinate & Tabular Dimensions
No. 14 – p. 156-157
Assignments:
No. 15 – p. 164
Due: April 6, 2011
No. 16 – p. 166-167
Week Eleven:
Topics:
Read: Units 20, 21, 22, 23, 26 & 27
Auxiliary Views
Developments
Views
Material Specifications
CNC drawings
Castings
Assignments:
03/16/16
April 6, 2011
No. 17 – p. 176
Due: April 13, 2011
No. 18 – p. 233
4
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
Week Twelve:
Topics:
April 13, 2011
Read: Units 28 & 29
Chain & Tabular Dimensioning
Aligning parts and holes
No. 19 – p. 244
Assignments:
No. 20 – p. 245
Due: April 20, 2011
No. 21 – p. 250-251
Week Thirteen:
Topics:
April 20, 2011
Read: Units 30, 31, 32, 33, 34, 35, & 36
Sections (cont.)
Pins
NC drawings
Assemblies
Steel Shapes
Welding Drawings
No. 22 – p. 268-269
Assignments:
No. 23 – p. 276
Due: April 27, 2011
No. 24 – p. 310-311
Week Fourteen:
Topics:
Read: Units 30, 31, 32, 33, 34, 35, & 36
Welding Drawings (cont.)
Geometric Dimensioning & Tolerancing
Symbols
Types
Form
MMC
LMC
RFS Datums
Assignments:
03/16/16
April 27, 2011
No. 25 – p. 322-323
Due: May 4, 2011
5
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
Week Fifteen:
May 4, 2011
Read: Units 47, 48, 49, 50, 51, 52, 53, & 54
Topics:
Geometric Dimensioning & Tolerancing
Orientation
Position
Runout
No. 26 – p. 474-475
Assignments:
Due: May 11, 2011
No. 27 – p. 476
Week Sixteen:
May 11, 2011
Read:
Topics:
Course Evaluations
Review for FINAL EXAM
Assignments:
Week Seventeen:
Topics:
May 18, 2011
Due:
Read:
FINAL EXAM
Assignments:
03/16/16
Due:
6
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
REQUIREMENTS FOR HAND-IN ASSIGNMENTS
& OTHER WORTH WHILE INFORMATION
1.
Use the copy of the answer page provided by the instructor to record your
answers; this will be handed in to the instructor for recording. (Also write the
answers on the appropriate page in the text for your own record.)
2.
All assignments will be due at the beginning of the next class. Homework
assignments will be reviewed at the beginning of each class time.
3.
Grading. Grading for the course will be as follows:
70% - Assignment scores
10% - Midterm Exam
20% - Final Exam
Grading scale for the course will be as follows:
100-90%
A
89-80%
B
79-70%
C
69-60%
D
59% and below
F
4.
Due Dates. If you miss a deadline, the following policy will be followed:
a. One week late
10% deduction
b. Two weeks late
20% deduction
c. Three weeks late
30% deduction
d. Four weeks late
No Grade
5.
Attendance. Attendance to lectures is required.
a. If you miss more than three classes, you may be dropped from the
course at the instructor’s discretion. There is always much more than
just the textbook content presented in class. Questions asked by students
often provide valuable learning experiences.
b. Plan on approximately 1 hour homework time per class.
c. If you must miss a class(es), consult the syllabus for the assignments for
that day(s) and complete them. They must be handed in on the day you
return to class.
d. Canceled class hotline number is 445-3030 or 866-532-5118.
6.
School closures. Classes missed due to school closures will be covered by a
double lecture the class meeting before or after the return to classes.
03/16/16
7
WESTERN NEVADA COLLEGE
DFT 110B – BLUEPRINT READING FOR INDUSTRY
ASSIGNMENT LIST
Assignment No.
1
2
3
4
5
6
7
8
9
10
11
12
13
MIDTERM
14
15
16
17
18
19
20
21
22
23
24
25
26
27
FINAL EXAM
03/16/16
Page No.
Handout
p. 44 A-14
p. 53 A-18
p. 54-55 A-19
p. 45 A-15
p. 74-75 A-27M
p. 86-87 A-30
p. 100-101 A-35
p. 114-115 A-33
p. 120 A-39
p. 127 A-41
p. 138-139 A-45M
p. 150-151 A-48
In Class
p. 156-157 A-51
p. 164 A-52
p. 166-167 A-54
p. 176 A-58
p. 233 A-74
p. 244 A-79M
p. 245 A-80M
p. 250-251 A-81
p. 268-269 A-85M
p. 276 A-87
p. 310-311 A-94
p. 322-323 A-96
p. 474-475 A-121
p. 476 A-122M
In Class
Assignment Name
Counter Clamp Bar
Feed Hopper
Base Plate
Compound Rest Slide
Coupling
Offset Bracket
Slide Bracket
Centering Connector Details
Hanger Details
Inch Tolerances & Allowances
Inch Fits – Basic Hole System
Bracket
Housing Details
Shaft Supports
Terminal Block
Rack Details
Gear Box
Offset Bracket
Contact Arm
Contactor
Spark Adjuster
Spider
Cover Plate
Base Skid
Base Assembly
Housing
End Plate
8