nwjHkk"k /Phones :01662-276172 QSDl lañ /Fax No. 01662-276984 osclkbZV /Website : http://nrfmtti.dacnet.nic.in bZ&esy /E-mail : fmti-nr@nic.in Hkkjr ljdkj GOVERNMENT OF INDIA mRrjh {ks= d`f"k e'khujh izf'k{k.k ,oa ijh{k.k laLFkku NORTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE d`f"k eU=ky; (d`f"k ,oa lgdkfjrk foHkkx) MINISTRY OF AGRICULTURE (DEPARTMENT OF AGRICULTURE & CO-OPERATION) VªSDVj uxj] fljlk jksM] fglkj (gfj;k.kk) TRACTOR NAGAR, SIRSA ROAD, HISAR – HARYANA No. 6-34/14-CPS Dated: Subject: Notice inviting quotation for the purchase of Resistance Temperature Detectors and K Type Thermocouple Dear Sir, Quotations for supply of following items are invited so as to reach this office on or before 10.07.2014 and will be opened on 14.07.2014 at 3:00PM Sl.No. 1. 2. Name of item Digital Weather Station Quantity 4 Nos. 1 No. 4. Digital Top Pan Balance Cap.- 20 Kg Digital Top Pan Balance Cap.- 6.0 Kg Pedal Force Measuring Instrument 5. Digital Inclinometer 2 Nos. 6. Digital Spring Testing Machine 1 No. 3. 3 Nos. 1 No. Terms and conditions: 1. Make and specification of stores should be invariably furnished and wherever needed illustrations/drawings/manuals should be attached with quotations. 2. Delivery period and validity of offer should be specified. 3. The rates should be quoted as applicable for supply to Government Departments and a certificate thereof should be furnished. 4. As per rules, payment against pre- receipted bills in triplicate would be remitted within 30 days after receipt of stores at this Institute. The payment will be made through ‘e’ payment in your account. 5. Break-up of taxes, packing & forwarding charges if any should be given. 6. Prices should include supply, assembly and commissioning at site. 7. On site warranty for the period of 1 to 3 years from the date of commissioning should be mentioned clearly. 8. Dispatch term such as FOR destination/FOB station of dispatch should be clearly stated. 9. The Director of this Institute reserves the right to accept or reject the quotations without assigning any reason whatsoever. Yours faithfully (K.Dobrial) Asstt. Engr. -For Director- DIGITAL BAROMETER -cum- HUMIDITY-cum-TEMP. INDICATOR (DIGITAL WEATHER STATION) Quantity Quantity: 4 Nos. Display Temp. Unit Barometer unit Humidity Unit Dew point Circuit Sensor structure Data Hold Memory Recall Sampling Time Power off Operating Temperature Operating Humidity Power Supply Specificatoin LCD size : 28 mm x 19 mm 0 C, 0F hPa, mmHg, inHg. % RH 0 C, 0F Costom one-chip of microprocessor LSI circuit. Barometer Semiconductor Humidity Capacitance himidity sensor, semiconductor Temperature Semiconductor Feeze the display reading Maximum & minimum value. Approx. 1 second. Auto shut off saves battery life or manual off (REC function) 0 to 50 0C Less than 80% R.H. DC 1.5 V battery (UM4/AAA) x 4 PCx ELECTRICAL SPECIFICATIONS Temperature Measuring Range Resolution Accuracy 0 0C to 50 0C / 32 0F to 122 0F 0.1 0C/ 0.1 0F ± 0.8 C / 1.5 0F Humidity Range Resolution Accuracy 10% to 95 % R.H. 0.1 % R.H. ≥ 70% RH ± (3% reading + 1% RH) < 70% RH – 3% RH. ± 3% RH. Barometer(Atmospheric pressure) Measurement mbar inHg Range 795 to 1050 23.48 to 31.01 Resolution 0.1 0.01 Accuracy @ reading ± 1mbar ± 0.05 inHg DIGITAL TO PAN BALANCE Technical specifications: Display Capacity Resolution(Readability) Operating supply voltage Readability Repeatability Pan size Power Connection Calibration Linearity Quantity required LCD 20.0 kg 0.1gm(100mg) Both DC and AC mains 0.1g 0.1g 170x190mm(appprox.) Both DC/AC operated Internal 0.02g One No. DIGITAL TO PAN BALANCE Technical specifications: Display Capacity Resolution(Readability) Operating supply voltage Readability Repeatability Pan size Power Connection Calibration Linearity Quantity required LCD 6.0 kg 0.1gm(100mg) Both DC and AC mains 0.1g 0.1g 170x190mm(appprox.) Both DC/AC operated Internal 0.02g One No. Pedal Force Measuring Instrument i) Digital Load Indicator Technical Specification : DISPLAY : 4½ Digit LCD Display RANGE : 0-2000N RESOLUTION : I Newton(0.1kg) ACCURACY : Within + 0.1 % FSR + 1 count ZERO ADJUSTMENT : By panel mounted multiturn potentiometer MODE (I) Normal mode : In this mode, the display follows the input. i.e., the display responds to instantaneous value of the input. (II) Peak hold : In this mode, the display responds to the input for increasing values only. RESET : In peak hold mode, pressing this switch resets the display to the present value of input. OUTPUT : 0 – IV DC for 1000 N with 1 K ohm source resistance OVER RANGE INDICATION: Readings in excess of its capacity CALIBRATION UNIT : Newton/kg OPERATING TEMP. : + 100C to + 4500C POWER SUPPLY : 12V DC II) Pedal Force Transducer(Load Cell) Technical Specification : TYPE : Bounded strain gauge type (Compression force) RATED CAPACITY : 2000N(200kg) SAFE OVERLOAD : 150 % of rated capacity MAX OVERLOAD : 200 % of rated capacity NON LINEARITY : + 1 % of rated capacity or better HYSTERESIS : + 0.5 % of rated capacity or better REPEATABILITY : + 1 % of rated capacity or better CREEP ERROR : + 0.1 % of rated capacity or better EXCITATION : 10 V DC maximum TERMINAL RESISTANCE : 350 ohms (nominal) TEMP. RANGE : 100C to 500C LOAD CELL CONNECTION : Through 4 pin allied connector CABLE : Braided shielded DIMENSIONS : Refer to diagram enclosed Picture of load cell DIGITAL INCLINOMETER Technical Specification :- Display angle (degrees) or inclination (%) Audible chime can be selected that indicates plumb and level User calibration possible LCD display operates through full 3600 and display 0-900 (in 4 quadrants) or 0-100% ( in 8 segments, i.e. every 450) Display inverts automatically to allow easy reading either way up! Inclinometer accuracy (over 3600) : 0 to 900+ 0.1 1 to 890+ 0.2 (inverted) Operating temperature (in use) Operating temperature (storage) Auto power shut off Dimension Power supply : : : : : -5to + 500C -20 to + 600C after approx.6 minutes 168x54x36 9V PP3 alkaline cell DIGITAL SPRING TESTING MACHINE Technical Data: Capacity 10 Kgf to 200 Kgf Type Universal, Tension & Compression Least Count (Force) 0.01 Kg Least Count (Deflection) 0.1mm Measuring Units N, Kgf selectable Accuracy + 0.5% of the reading Display Microcontroller based 6 Digit Digital Display System (Force & Deflection) 300mm Max. Deflection Peak Load & Buzzer on Overload Feature 180VAC to 260VAC @ 50 Hz Power required Through hand operated rotating wheel Load applying Manual