The 7th International Conference of SuDBE2015, Reading, UK; 27-29 July, 2015
Topic: T2.4 Renewable Energy and Applications
Reference number: 123456
Paper title
First Author1, Corresponding Author2, *, Andrew Wang2
1. School of Urban Construction and Environment Engineering, Chongqing University, Chongqing 400045, China
2. The University of Reading, Reading 00000, UK
Abstract: Prepare an informative abstract of 200-300 words based on the completed paper. The abstract should provide
information on the purpose of the study, methods or procedures, results, discussion and concluding remarks or
interpretation of the results. If feasible, it should also indicate the meaning or importance of the work. It should be a selfcontained statement giving the reader a clear indication of the purpose and content of the paper.
Key words: thermal adaptation, thermal comfort, skin temperature, hot-humid region (no more than five keywords)
1 Introduction
The introduction should present the practical and scientific background for the study or presentation, the
hypothesis(es) and a clear statement of the objective(s) of the study/presentation.
The length of full papers is 6-8 pages including references, figures and tables. Please use the format
described on these pages. The accepted file format is Word file. The recommended type face is Arial. All text
should be left-justified 10pt bold face (style: Normal). Use 12 pt Uppercase of first letter bold font for main
headings and 10 pt normal lowercase font for 2nd level headings. Do not use page numbers.
2 Method or Experimental
This section should describe the study design, materials, measuring methods and procedures and
statistical methods. Measuring and statistical methods should be mentioned, but for routine methods a
reference rather than a description of the method is recommended.
The full papers must provide new information on scientific validation, comparative testing, research or
development.
3 Results and discussion
3.1 Tables and illustrations
In general, figures and other illustrations should be used when they are shorter, clearer, or more effective
* Corresponding author at: School of Urban Construction and Environment Engineering, Chongqing University, Chongqing
400045, PR China. Tel.: +86 18612345678; fax: +86 23 65120771.
E-mail address: sudbe2015@126.com.
The 7th International Conference of SuDBE2015, Reading, UK; 27-29 July, 2015
than explanations in words. All tables must have suitable captions above the table. Use single line border as
presented in Table 1. Tables and figures should be inserted in the text near to the place they are mentioned
the first time.
Table1 Environmental parameters in summer
Physical Parameters
Max
Min
Mean
Indoor Temp(oC)
28
20
25
39
29
32
Outdoor
Temp(oC)
Fig.1 Building energy consumption of some building of Beijing from June 1-July 31
3.2 Equations
Equations should be centred and numbered as in the example below:
𝐸[𝑛] =
𝜎𝜏
𝜋𝜎𝜏
𝑒𝑥𝑝 (−
1 (𝑇−𝜇𝑇 +𝐿)2
2
𝜎𝑇2
)𝑡
(1)
where T is the mean value of the temperature and T is the standard deviation of the temperature. It is the
standard deviation of the rate of change of the temperature, and n is the number of level crossings. Use italic
symbols for quantities and variables. Punctuate equations with commas or periods when they are part of a
sentence.
4 Conclusions
A conclusion should be presented here to illustrate the whole paper briefly.
Acknowledgements
This work was supported by XXX (Grant No. YYY).
References
[1]
[2]
[3]
[4]
XXX, YYY, ZZZ. Application of three S technology in the investigation and analysis of urban thermal environment [J]. Environmental
science and technology. 1997,2:35-38.
XXX, YYY, ZZZ. Introduction to the geographical information system [M]. Beijing: Science Press, 2003.
XXX. On-board real-time state and fault identification for rovers[C]//IEEE Intel Conference on Robotics & Automation. San Francisco：
IEEE Press, 2000：1175−1181.
XXX, YYY. Advance on standard database of system engineering of Chinese academic journals[EB/OL].[1998-10-04].http ：
//www.cajcd.edu.cn/pub/wml.txt/980810-2.html,1998-08-16/.