Automatic compensating controller of JKL series inactive power
Application
The automatic compensating controller of JKL series inactive power is designed according
to JB/T9663-1999 national latest standard, can reject and use with the electric capacity
of low-voltage static of every type together , can monitor the power factor of the
electric wire netting and not have work electric current in real time , throw and cut
the condenser to compensate automatically to the electric wire netting.
JKL5C/3B/1B type adopt high-performance one-chip computer , plum of USA love Company ,
increase the outage memory function, the number shows the factor of power of the electric
wire netting and voltage, powerful, it is accurate to compensate, debug the outstanding
characteristic such as being simple.
JKL607FA/JKL607FS type adopts COMS digital integrated circuit to design , adopts the
pointer gauge outfit to point out COS?value. Digital circuit and and combination,
indicator of gauge outfit, interfere occasion very better and heavy scene of wave in
harmony of electric wire netting, can work steadily too. Establish the parameter and
regulate freedom. Bring manual function, can manual switch is it cut electric capacity
of compensating to throw with plane, is it output state person who advantage to keep.
JKLD5C type adopts the dynamic inactive power compensating controller that the new-type
one-chip computer designed, output DC9～12V signal, control switch or zero control touch
off board two-way silicon controlled rectifier cut to throw fast to go on to condenser
to compensate to get an electric shock to have dynamically to control (pass zero noiseless
to shoot and cut)。
Type and meaning
Normal operation
1、 Height above sea level：≤2000 meter.
2、Environment temperature：-25℃～+40℃.
3、Relative humidity：20℃≤90% .
4、Surrounding environment:
It is flammable not to have, explosive, conductive dust, have not corroded the gas
2、 Main technical parameters
3、 1、Rated voltage：JKL5C / 3B / 1B 380V±15%; JKL2B / 2C 220V±15%
2、Take a sample in the electric current：≤5A
3、Frequency: 50Hz～60Hz
4、Sensitivity：100mA
5、Put into the limit of the door：0.85～0.98
6、Excise the limit of the door：-0.99～-0.94
7、 Overvoltage protection：400～440V
8、Delay time：1～150S
9、Control way：4、6、8、10、12
10、The outer cover protects the grade：IP30
11、Dielectric strength Lie between the electric intensity: Power frequency Engineer
3000V
4、 Install and mounting hole
The installation of the appearance of the JKL series controller , in order to inlay the
putting type outer cover structure, the side has the mounting hole , fasten to is it
insert hole to link up with enclosure , fasten enclosure screw fix on not rejecting
controller promptly (whether special demand is it order to consult to want).
JKL3B external dimension： 170×110×127mm
unclose aperture：162×102mm(wide×high)
JKL1B4 external dimension： 147×110×127mm
unclose aperture：140×102mm(wide×high)
JKL5C external dimension： 120×120×80mm(plastic hull)
unclose aperture：113×113mm(wide×high)
120×120×120mm(iron hull)
unclose aperture：113×113mm(wide×high)
JKL2 Cexternal dimension：120×120×120mm
unclose aperture：113×113mm(wide×high)
JKL2B external dimension：170×110×127mm
unclose aperture：162×102mm(wide×high)
JKL5C4 external dimension： 120×120×120mm
unclose aperture：113×113mm(wide×high)
JKL607FA external dimension： 120×120×120mm
unclose aperture：113×113mm(wide×high)
5、 JKL607FS external dimension： 170×110×127mm
unclose aperture：162×102mm(wide×high)