VisView Basics - (JDSN).

advertisement
Engineering Systems Capability
Engineering Systems Capability
Document Overview
This session will introduce the JDSN Supplier Profile – Engineering Systems
Capability. This is the tool used to manage and organize part files at your company.
Prerequisites
The following activities must occur before a Supplier user will be able to access
JDSN Supplier Profile – Engineering Systems Capability module:

All Supplier users must have a JD userid and password prior to accessing
JDSN.

Supplier users must be added to their company’s Supplier Profile.
Objectives
After reviewing this information, you will be able to do the following:

Display your company's Engineering Systems Capability information.

Add a new Engineering Systems Capability.

Edit an existing Engineering Systems Capability record

Delete an Engineering Systems Capability record.
Page 1
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Page 2
Dec 2007
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Table of Contents
Engineering Systems Capability ...................................................................................... 1
Application Basics ........................................................................................................... 4
What is JDSN Supplier Profile? ................................................................................... 4
What is Engineering Systems Capability? .................................................................... 4
Requirements for Using Engineering Systems Capability ............................................ 4
Requesting a John Deere Userid ................................................................................. 4
Starting Engineering Systems Capability. .................................................................... 5
Selecting Menu Options ............................................................................................... 7
JD Supply Network Support ......................................................................................... 7
Error Messages ........................................................................................................... 7
Printing ........................................................................................................................ 7
Adding an Engineering Systems Capability.................................................................. 8
Viewing an Engineering Systems Capability .............................................................. 11
Editing an Engineering Systems Capability ................................................................ 12
Deleting an Engineering Systems Capability.............................................................. 13
Glossary ........................................................................................................................ 14
Page 3
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Application Basics
What is JDSN Supplier Profile?
Supplier Profile is a web application tool designed to provide a summary of a
Supplier's relationship with specific Deere Units.. Supplier Profile provides basic
company information.
What is Engineering Systems Capability?
The Engineering Systems Capability tool that is part of a Supplier's Profile allows
Supplier companies or John Deere employees to select the file format to view
drawings for a specified John Deere Unit and identify engineering capabilities.
Requirements for Using Engineering Systems Capability
Before Suppliers can access information from JDSN Supplier Profile / Engineering
Systems Capability, several requirements must be met:

The Supplier company must be authorized to access the JDSN Supplier
Profile application. John Deere makes the request for a Supplier company to
be authorized (John Deere Corporate Supplier Number). This is a John
Deere responsibility.

Before Supplier users can log into JDSN Supplier Profile, each user must
have a valid John Deere supplier userid and password.

A Supplier user must be added as a contact for their company in John
Deere's Supplier Profile application and have a valid email listed.

Before Suppliers can see any Part information or geometry, the John Deere
Buyer must associate the Supplier company with the Part. Suppliers can only
see the parts associated with their company.
Requesting a John Deere Userid
Supplier users can request a John Deere userid from the appropriate John Deere
representative. After the userid is approved, the Supplier user receives an email with
the assigned userid and temporary password.
Page 4
Dec 2007
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Starting Engineering Systems Capability
Use the steps listed below to display the Engineering Systems Capability page.
1. Display the JD Supply Network page.
This page is located at https://jdsupply.deere.com .
2. After displaying the front page, position
your mouse on supplier and click on
Engineering Systems.
3. Type your John Deere User ID (i.e.,
ou12345) in the User Name box.
4. Click in the Password box and type your
password.
5. Click the Submit button.
Page 5
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
6. Click the I AGREE button to accept to the JD Supply Network Terms and
Conditions of Use Agreement and display the JDSN Engineering Systems Tool
Main Menu page.
If you click the I DO NOT AGREE button, you will not be able to display the Engineering
Systems Capability page.
Page 6
Dec 2007
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Selecting Menu Options
Click the Select a page list button and select one
of the options from it. The Select a page list
button is available from any screen.
If you cannot get to this page, please call the
Supply Management Enterprise Support
Center.
JD Supply Network Support
Suppliers with access to JD Supply Network can call the Supply Management
Enterprise Support Center at 800-939-1499 for help with applications available
from JD Supply Network. Anyone calling will be asked for his or her User ID.

In Europe call 00800.33373.456.
Error Messages
When an error occurs, a message is displayed at the top of the page in red. The
field with the problem displays a red background.
Click the error number link to display specific help for the error message.
Click the Close button to close the Help window for the error message if it was opened.
Printing
Choose File - Print from the menu or click the Print button in the Browser toolbar to
print any of the pages displayed from the application.
Page 7
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Adding an Engineering Systems Capability
Use the steps listed below to add an Engineering Systems Capability record to your
company's profile.
1. Display the Engineering Systems Capability page.
2. Click the Add Capability button to display the Add Engineering Systems
Capability page.
3. Complete the appropriate fields.
4. Select the save button to add the capability.
Geometry Communication Method applies to all Engineering System Profiles per
supplier and is a required field.
Page 8
Dec 2007
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Page 9
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
The table below briefly describes the Add Engineering Systems Capability criteria.
Field Name
Description
Geometry
Communication
Method

Select the Geometry Communication Method. Options
include HTTP or DXM.

This field applies to all Engineering System Profiles per
supplier and is a required field.
Dimension

Select 2D or 3D dimension.
File Format

Select the appropriate file format or type the desired format in
the text box to the right of the field if it is not available in the
list.
CAD System

Select CAD system from the list or type the desired system in
the text box to the right of the field if it is not available in the
list.
CAD Release

Indicate the CAD Release.
PDM System

Select the PDM (Product Data Management) System from
the list or type the desired system in the text box to the right
of the field if it is not available in the list.
PDM Release

Indicates the version of the PDM (Product Data Management)
tool being used.
Method of Design
Exchange

Select the Method of Exchange from the list or type the
desired method of design exchange in the text box to the right
of the field if it is not available in the list.
Firewall

Select Yes or No to indicate if your company's network has a
firewall.
Unit

Select a list of Deere units using this supplier system.

Use control-click to select multiple units.
Supplier Contacts

The selected person(s) identify who a Deere person would
contact about your company's engineering capabilities.
3D System
Select the 3D System(s) for which your company can provide
engineering.
Page 10
Dec 2007

Wireframe

Surface

Solid

Other
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Viewing an Engineering Systems Capability
Use the steps listed below to display your company's engineering systems
information
1. Display the Engineering Systems Capability page.
2. Click View Details to display the Engineering Systems Profile Detail.
Page 11
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Editing an Engineering Systems Capability
Use the steps listed below to edit a capability's information.
1. Display the Engineering Systems Capability page.
2. Click the Edit button to the left of the capability record.
3. Make the necessary changes you wish to change.
4. Click the save button to return to the Engineering Systems Profile Detail page.
The Ag Division requires approval for all Geometry Communication Method and File
Format requests / changes.
Page 12
Dec 2007
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Deleting an Engineering Systems Capability
Use the steps listed below to delete a capability record from your company's profile.
1. Display the Engineering Systems Capability page.
2. Click the View Details link.
3. Click the delete button.
4. Click the ok button to confirm the deletion and
return to Engineering Systems Capability page.
Page 13
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Glossary
Term
Definition
A
B
C
CAD Release

Indicate the CAD Release.
CAD System

Select CAD system from the list or type the desired system in
the text box to the right of the field if it is not available in the list.

Select 2D or 3D dimension.
D
Dimension
E
Engineering Systems
Capability
Allows Supplier companies or John Deere employees to select the file
format to view drawings for a specified John Deere Unit and identify
engineering capabilities.
F
File Format

Select the appropriate file format or type the desired format in
the text box to the right of the field if it is not available in the list.
Firewall

Select Yes or No to indicate if your company's network has a
firewall.

Select the Geometry Communication Method. Options include
HTTP or DXM.

This field applies to all Engineering System Profiles per supplier
and is a required field.
G
Geometry
Communication
Method
H
I
J
K
L
M
Page 14
Dec 2007
JDSN Supplier Profile – Engineering Systems Capability
Copyright © Deere & Company
Engineering Systems Capability
Term
Definition
Method of Design
Exchange

Select the Method of Exchange from the list or type the desired
method of design exchange in the text box to the right of the
field if it is not available in the list.
PDM Release

Indicates the version of the PDM (Product Data Management)
tool being used.
PDM System

Select the PDM (Product Data Management) System from the
list or type the desired system in the text box to the right of the
field if it is not available in the list.
Supplier Contacts

The selected person(s) identify who a Deere person would
contact about your company's engineering capabilities.
Supplier Profile
Provides basic company information for a supplier company.
N
O
P
Q
R
S
T
3D System
Select the 3D System(s) for which your company can provide
engineering.

Wireframe

Surface

Solid

Other
U
Unit

Select a list of Deere units using this supplier system.

Use control-click to select multiple units.
V
W
XYZ
Page 15
Dec 2007
JDSN Supplier Profile -- Engineering Systems Capability
Copyright © Deere & Company
Download