TECHNICAL DATA SHEET TELCO 100 OHM CABLE 4*ISTP 0.4 FEP – H/ES H PTR 1211/13 code version date page 46488 1 199-07-21 1/3 APPLICATION 4 Fold foil screened pair cable with FRNC sheath for digital transmission for digital telephony systems. Indoor use only. CONSTRUCTION 6 7 8 1. Conductor Material Soft annealed tinned copper Diameter of conductor 0.4mm (AWG26) 2. Drainwire Material Soft annealed tinned copper Diameter of conductor 0.4mm (AWG26) 3. Insulation Material FEP Diameter over FEP 0.9 0.05mm Minimum wall thickness of insulation 02 mm 4. Aluminium-Polyester foil (longitudinally applied, aluminium side facing inwards) Nominal thickness of Aluminium side 0.023 mm 5. Sheath Material FRNC Diameter over sheath 2.75 0.05 mm Minimum wall thickness sheath 0.2 mm Colour of sheath RAL 7032 6. Cable core The cable core consists of 4 elements. Each of the elements are numbered every 2 cm for identification (No. 1 to 4)*. 7. Braided screen Material Soft annealed tinned copper wires Nominal diameter of screening wires 0.16 mm Coverage > 90 % Polyester foil provided under the screen Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET TELCO 100 OHM CABLE 4*ISTP 0.4 FEP – H/ES H PTR 1211/13 8. Outer sheath Material Diameter over outer sheath Minimum wall thickness of outer sheath Colour of outer sheath Ripcord code version date page 46488 1 199-07-21 2/3 FRNC 8.3 0.2 mm 0.45 mm RAL 7032 Provided under the sheath (* remark: every 50 cm there is a break of 8cm between the numbers) REQUIREMENTS AND TEST METHODS Electrical: Resistance of conductor @ 20C Impedance @ 1 MHz Nominal attenuation @ 1MHz Dielectric strength test conductor – screen(foil) Dielectric strength test conductor – conductor < 145 /km 100 10 4.2 dB/100m 1kV dc (1 min.) 1 kV dc (1 min.) Mechanical and physical: Tensile strength conductor > 200 MPa Elongation conductor (at rupture) >10 % Stripping force insulation 2 - 15N Tensile strength sheath > 6.5 N/mm2 Elongation sheath >100% Elongation sheath after aging 80C >80% unaged value Tensile strength sheath after aging 80C > 80% unaged value LOI of the sheath >30 Resistance to flame propagation IEC 332-1 Corrosivity of fire gases (acc. to DIN 47472) sheathing compound PH-value >3.5 conductivity < 100μS/cm Bending / setting radius 10*D / 5*D (D = diameter cable) Temperature range processing and operating -20˚C to + 85˚C Temperature range storage -40˚C to +70˚C MARKING 'BELDEN VENLO HOLLAND YYYY 4-FOLD STP CABLE 2*0.4 SCR COMCODE 407299940' + meter marking ( YYYY = year of manufacture) Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET TELCO 100 OHM CABLE 4*ISTP 0.4 FEP – H/ES H PTR 1211/13 code version date page 46488 1 199-07-21 3/3 PACKAGING On non-returnable reels (E560) with a nominal length of 500m (5%) and a minimum length of 200m. Each reel is labelled with the following data: Belden Logo Belden codenumber Item description Length on the reel Date of manufacture. Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner