http://WWW.SWIMMINHOLES.COM
Swimmin Holes will save you Thousands of dollars by
helping you do away with the contractor. The guy that
make all the extra money for doing almost nothing, and
sometimes nothing expect making one phone call to pass
the job on to some one else, but the contractor still gets
his pockets full of your hard earned money. Swimmin
Holes will help you be your own contractor, even If you
don’t want to lift a finger for the entire construction
process, Swimmin Holes can help you keep Thousands of
your dollars to use for something else, and you will have
the pool of your dreams. This is how it works, we figure
out what you want, where you want it, and how much
it will cost, for free (Up to this point our time is free
1
all this won’t cost you a dime). Than Swimmin Holes will
do the paper work for you to get the permit. The paper
work to get the permit includes structural drawing
approved by a civil engineer, plotting the location of the
pool on the land plat(plat provided by homeowner), and
layout at the site, filling out all necessary forms, home
owner to sign and Swimmin Holes will deliver them to the
appropriate office(s),Homeowner to pick up and pay for
permit(s), for a fee, it takes approx 12 hours time to
achieve the entire process, our consultant rate of $65.00
per hour multiplied by 12 is $780.00 paid in advance(This
is to ensure we get paid for our time, this is the only
advance payment you will ever make to Swimminholes).
Rather than paying a contracted price you can buy the
specialty swimming pool material through Swimmin
Holes at the low price of 20% above wholesale cost,
the material is shipped directly from the distributor to
your home you don’t pay for the material until the time of
delivery. (Attached is wholesale material cost pricing list
of some commonly used items.) All other material to be
used for the construction you pay for at cost Swimmin
Holes doesn’t a dime on it. After the pool perimeter
forms are installed, space allowing, a large excavator will
come to your site and dig the hole fast, you will pay the
experienced owner/operator directly; Swimmin Holes
won’t add anything on to the bill. Simmin Holes will be
on site overseeing and doing all the hand work. The
Shotcret crew is handled the same way Swimmin Holes
will let a quality shotcrete firm know when to come shoot
2
your pool for you (The majority of the swimming pool
installation firms in this country do not have the
equipment to install swimming pool shells they sub
contract this phase to a specialty contractor), you pay
them directly Swimmin Holes won’t add anything on to
the bill, we will be there to oversee the shoot to ensure
everything goes the way it should. When the pool is ready
to be plastered Swimmin Holes will let a quality plastering
firm know when to plaster your pool for you (The
majority of the swimming pool installation firms do not
have the equipment to install the final finish of the
pool they sub contract this phase to a specialty
contractor), you pay them directly, Swimmin Holes
won’t add anything on to the bill we will be their to
oversee the plastering to ensure everything goes the way
it should. One of the other hyperlinks is for a time
schedule, that time schedule is a very accurate
accounting of the time needed to complete the phases of
the construction. If you don’t want to get involved
Swimmin Holes will charge you by the hour to build your
pool. The hourly rate for a three man crew is $125.00 per
hour. The rate for a two man crew is $95.00 per hour.
When the Shotcret and the plastering are performed the
rate is only $65.00 per hour .Swimmin Holes will make a
little profit on the specialty material. And we get paid
for our time worked. You will save thousands.
My name is Kevin Boylen I have 30 years of experience I
will be the one overseeing / building your pool.
3
Material Wholesale Cost for 2008 Residential Swimmin Holes
Pump and filter system “A” System circulates approximately 95 GPM
5700 gallons per hour
30’ Hayward Pro Series High Rate Sand filter
2” multi-port valve (6 way valve)
1 ½ Horse Power Hayward Super Pump
4
$561.50 H6067
$122.73 H8017
$357.06 K4006
Pump and filter system “B” System circulates approximately 62 GPM
3720 gallons per hour
24” Hayward Pro Series High Rate Sand filter
1 ½ multi-port valve (6 way valve)
¾ horse power Hayward Super pump
Filter sand #20 graded silica
30” requires 300 lbs.
$445.42 H6068
included with filter
$302.95 K4002
50 pound bags @ $7.65
24” requires 500 lbs.
H8110
Underwater Lighting Options “Pentair pool products” BRAND
POOL LIGHTS
SAM light 50 foot cord
Regular light 50 foot cord
Pool light niche Stainless Steel
$506.65
$162.26
$154.74
O1850
O1110
O1130
SPA LIGHTS
SAM light 50 foot cord
Regular light 50 foot cord
Spa light niche Stainless Steel
$154.52
$157.79
$37.64
O1142
O1138
O1151
Light junction box (1 needed per light)
$16.74
O1165
POLARIS ROBOTIC VAC-SWEEP CLEANING SYSTEM
Polaris 180
Polaris 280
Polaris 380
“Original design of the robot”
“Original design with improvements”
“Newest technology”
Polaris Booster Pump
(Quiet motor model)
5
$446.96
$454.36
$683.76
E2001
E2006
E2002
$298.50
E2004
Sanitizer/ oxidizer
PH controllers
Chlorine Generators
Gold line aqua-rite chlorine generators for up to 40,000 gallon pools
$1006.56 D3000
Delzone ozonator
up to 50,0000 gallons
$528.00
D6006
Del Trio-pure combination chlorine generator / ozonator
Trio 25 up to 25,000 gallons
$2098.90
Trio 50 Up to 50,000 gallons
$2382.78
D6102
D6098
Combination chlorine generator PH controller
PH controller
Evaporated salt
40 pound bag
@
$6.32
D5502
Calcium chloride
50 pound bag
@
$14.79
A6087
Sodium bisulfate
50 pound bag
@
$28.37
A6096
Cyanuric acid
50 pound drum
@ $50.72
A6126
Jandy Heat pump
131,000 BTU
Jandy Electronic controls with actuator valves
Intermatic time clock /outdoor/plastic box/ 208-277 volts
Intermatic
set of timer trippers (dogs)
S.R. SMITH FLYTE DECK DIVING BOARD
6
$3991.15
J8024
$718.63
J8032
$101.67
$ 2.29
O4135
O4155
6 foot board
6 foot base with jig
$285.01
$174.24
G3085
G3067
8 foot board
8 foot base with jig
$306.07
$262.82
G3087
G3068
S.R. SMITH RAIL GOODS
Ladder
3 tread
Grab Rail
Stainless steel
Dip to pool/spa
Stainless steel
@ $134.24
G7020
@ $198.20
G7092
Anchor cups /Solid brass /2 needed per ladder or rail
Escutcheon plates Round chrome plastic
@ $16.98
pair
G7115
$3.51
G7145
$63.16
L4950
AUTOMATIC WATER FILL
Lectro water leveler
(Automatic control)
CANTILEVER DECK FORMS
Stermeier deck forms “Capstone” style / 14-8 foot case
Marble dust
100 pound bag
White Portland cement
@ $184.35
@ $14.02
94 pound bag
@ $21.37
BALL VALVES
7
T1548
T8000
T8020
Double union ball valves (Praher brand)
¾ inch valve
1 ½ inch valve
2 inch valve
@ $10.20
@ $19.44
@ $32.29
V4075
V4080
V4082
Single union ball valves (Jandy brand)
1 ½ inch valve
2 inch valve
@ $11.66
@ $13.70
V4116
V4121
Non union ball valves (Jandy brand)
¾ inch
1 ½ inch
2 inch
@ $3.91
@ $8.67
@ $10.53
SKIMMERS MAIN DRAINS RETURN FITTINGS
VACUUM FITTINGS
2” / square lid / NSF approved
Hayward Skimmer
Hayward Main drains
V4207
V4215
V4220
@ $68.60
L1042
2” adjustable collar anti-vortex pair $38.07
N1082
Hayward Hydro-static relief valve plastic
Hayward Collector tube (for hydro-static relief valve)
@ $11.25
@ $ 7.01
N1150
N1120
Hayward Hydrotherapy unit
@ $12.81
N1062
@ $ 1.92
N1005
7 inch
Hayward Vacuum fitting 1 1/2 “SKT X 2” MIP
Swimquip floor fitting
Hayward eyeball
Hayward eyeball
Hayward eyeball
Adjustable
@ $15.99
1” opening
¾” opening
Rubber nozzle
@ $2.11
@ $2.11
@ $3.87
8
N1117
N1012
N1011
N1027
Hayward eyeball
Removal tool
@ $2.54
Rope anchor cup
Chrome plated solid brass
@ $31.99
N1185
PVC Cement
PVC Primer
Heady bodied
Clear Quart
Clear Quart
@ $12.65
@ $ 7.02
V1008
V1111
Teflon tape
Duct tape
½’ wide 520” long roll
High quality
@ $ .73
@ $5.36
Sump pump
Little Giant brand
Big John model
$144.92
N1083
V1205
R1085
K1015
MAINTENANCE EQUIPMENT
8’-15’ telescopic pole Goldline brand Dual-lock
Skim net Rainbow aluminum frame
Wall brush 18” brush aluminum bracket
Algae brush 10” stainless steel bristles
Vacuum head STA-RITE 14” Flexamatic
Skim vac adapter Hayward Deluxe with gasket
Vacuum hose 30 feet Heavy duty with swivel cuff
Thermometer Floating duck
Test kit Taylor 2005 complete
$19.74
$12.59
$9.79
$7.56
$25.12
$8.53
$24.22
$6.16
$37.95
THESE ARE WHOLESALE PRICES YOU HAVE TO PAY THE
SALES TAX PLUS A 20% MARK UP ON THESE PRICES.
THE PIPE AND PLUMBING FITTINGS CANNOT BE FIGURED IN
TO THE ORDER UNTIL THE POOL SIZE, SHAPE AND
LOCATION OF IT IN RELATIONSHIP TO THE EQUIPMENT IS
ESTABLISHED.
ALL PIPE AND FITTINGS WILL BE A MINIMUM OF SCHEDULE
40 PRESSURE PIPING.
9
F6014
F7025
F5015
F5032
F3009
L1936
F1015
B2025
B1085
ALL TRUNK LINES TO BE PRESSURE TESTED AT 33 PSI FOR
15 MINUETS.
THE MAJORITY OF THE PIPING IS TO BE 2 INCH DIAMETER.
THE SOUTHERN MARYLAND DELIVERY FEE IS $75.00 THE POOL
PURCHASER IS RESPONSIBLE FOR THAT FEE.
TILE HAS A VERY WIDE RANGE IN PRICE, FOR A 6” X 6” TILE
YOU CAN PAY FROM $2.00 TO $50.00 PER TILE THE TILE NEEDS
TO BE WHAT IS KNOWN AS FROST PROOF TILE. TO KEEP THE
LONG TERM MAINTENANCE LOW I SUGGEST YOU USE 6” X 6”
SQUARE TILE TO MINIMIZE THE AMOUNT OF GROUT .THE 6” X 6”
TILE INSTALLS FASTER WHICH WILL ALSO HELP KEEP THE COST
OF THE INSTALLATION LOW AS WELL.
WWW.SWIMMINHOLES.COM
mailto:KBOYLEN@SWIMMIMHOLES.COM
10