Doc No
7816-1
7816-2
7816-3
7816-4
7816-5
7816-6
WT 01
CISPR 14-1
60050 GROUP
30
60050 GROUP
31
60050 GROUP
55
60050 GROUP
60
86-3
GUIDE 113
646
821
1539-1
1539-2
1539-3
Title
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part
1: Physical Characteristics First Edition
Information Technology - Identification Cards - Integrated Circuit(s)
Cards with Contacts - Part 2: Dimensions and Location of the
Contacts First Edition
Information Technlogy - Identification Cards - Integrated Circuit(s)
Cards with Contacts - Part 3: Electronic Signals and Transmission
Protocols Second Edition
Information Technology - Identification Cards - Integrated Circuit(s)
Cards with Contacts - Part 4: Interindustry Commands for
Interchange First Edition; Amendment 1: 1997
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part
5: Numbering System and Registration Procedure for Application
Identifiers First Edition; CEN EN ISO/IEC 7816-5: 1995;
Amendment 1: 1996
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part
6: Interindustry Data Elements First Edition; Technical Corrigendum
1: 1998; Amendment 1: 06/15/2000
IEC System for Conformity Testing and Certification of Wind
Turbines; Rules and Procedures First Edition
Electromagnetic Compatibility - Requirements for Household
Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
Fourth Edition; Amendment 1: 08/2001
(Withdrawn)International Electrotechnical Vocabulary Group 30:
Electric Traction Second Edition; Replaced by IEC 60050-811:1991
(Withdrawn)International Electrotechnical Vocabulary Group 31:
Signalling and Security Apparatus for Railways Second Edition;
Replaced by IEC 60050-821:1998
(Withdrawn)International Electrotechnical Vocabulary Group 55:
Telegraphy and Telephony Second Edition
(Withdrawn)International Electrotechnical Vocabulary Group 60:
Radiocommunications Second Edition; Corrigenda-1970; Replaced
by IEC 60050-713:1998
Primary Batteries - Part 3: Watch Batteries First Edition
Materials Declaration Questionnaires - Basic Guidelines First Edition
Information Technology - ISO 7-Bit Coded Character Set for
Information Interchange Third Edition
IEC 821 VMEbus - Microprocessor System Bus for 1 Byte to 4 Byte
Data Second Edition
Information Technology - Programming Languages - Fortran - Part 1:
Basic Language Technical Corrigendum 1:06/01/2001
Information Technology - Programming Languages - FORTRAN Part 2: Varying Length Character Strings Second Edition
Information Technology - Programming Languages - Fortran - Part 3:
Conditional Compilation First Edition; Corrected and Reprinted
1863
1989
2022
DIS 2110
2326-1
1864
2110
2382-1
2382-4
2382-5
2382-7
2382-8
2382-9
2382-13
2382-14
2382-15
2382-16
2382-17
2382-18
2382-20
12/15/2000
Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic
Tape for Information Interchange Using NRZ1 at 32 ftpmm (800 ftpi)
- 32 cpmm (800 cpi) Second Edition
Programming Languages - COBOL Second Edition; Amendment 11992; Amendment 2-1994
Information Technology - Character Code Structure and Extension
Techniques Fourth Edition; Technical Corrigendum 1: 04/15/1999
(Draft)Information Technology - Data Communication - 25-Pole
DTE/DCE Interface Connector and Contact Number Assignments
Printed Boards - Part 1: Generic Specification First Edition; IECQ
QC 230000; Cancels and Replaces IEC 326-1
Information Technology - Unrecorded 12,7 mm (0,5 in) Wide
Magnetic Tape for Information Interchange - 32 ftpmm (800 ftpi),
NRZ1, 126 ftpmm (3 200 ftpi) Phase Encoded and 356 ftpmm (9 042
ftpi), NRZ1 Fourth Edition; CEN EN 21864: 1993
Information Technology - Data Communication - 25-Pole DTE/DCE
Interface Connector and Contact Number Assignments Amendment
1: Interface Connector and Contact Assignments for DTE/DCE
Interface for Data Signalling Rates Above 20 000 Bit/s Third Edition;
Amen
Information Technology - Vocabulary - Part 1: Fundamental Terms
Third Edition
Information Technology - Vocabulary - Part 4: Organization of Data
First Edition
Information Technology - Vocabulary - Part 5: Representation of
Data First Edition
Information Technology - Vocabulary - Part 07: Computer
Programming Third Edition
Information Technology - Vocabulary - Part 8: Security Second
Edition
Information Technology - Vocabulary - Part 9: Data Communication
Second Edition
Information Technology - Vocabulary - Part 13: Computer Graphics
Second Edition
Information Technology - Vocabulary - Part 14: Reliability,
Maintainability and Availability Second Edition
Information Technology - Vocabulary - Part 15: Programming
Languages First Edition
Information Technology - Vocabulary - Part 16: Information Theory
Second Edition
Information Technology - Vocabulary - Part 17: Databases Second
Edition
Information Technology - Vocabulary - Part 18: Distributed Data
Processing First Edition
Information Technology - Vocabulary - Part 20: System
2382-23
2382-24
2382-25
2382-26
2382-27
2382-28
2382-29
2382-31
FDIS 2382-32
2382-34
4873
6329
TR 6371
6429
6522
2593
3309
3309 DRAFT
AMD 4
3788
Development First Edition
Information Technology - Vocabulary - Part 23: Text Processing First
Edition
Information Technology - Vocabulary - Part 24: Computer-Integrated
Manufacturing First Edition
Information Technology - Vocabulary - Part 25: Local Area
Networks First Edition
Information Technology - Vocabulary - Part 26: Open Systems
Interconnection First Edition
Information Technology - Vocabulary - Part 27: Office Automation
First Edition
Information Technology - Vocabulary - Part 28: Artificial
Intelligence - Basic Concepts and Expert Systems First Edition
Information Technology - Vocabulary - Part 29: Artificial
Intelligence - Speech Recognition and Synthesis First Edition
Information Technology - Vocabulary - Part 31: Artificial
Intelligence - Machine Learning First Edition
(Draft)Information Technology - Vocabulary - Part 32: Electronic
Mail
Information Technology - Vocabulary - Part 34: Artificial
Intelligence - Neural Networks First Edition
Information Technology - ISO 8-Bit Code for Information
Interchange - Structure and Rules for Implementation Third Edition
Duplicators and Document Copying Machines - Symbols First
Edition
Information Processing - Interchange Practices and Test Methods for
Unrecorded Instrumentation Magnetic Tape First Edition
Information Technology - Control Functions for Coded Character
Sets Third Edition
Information Technology - Programming Languages - PL/I General
Purpose Subset Second Edition
Information Technology - Telecommunications and Information
Exchange between Systems - 34-Pole DTE/DCE Interface Connector
Mateability Dimensions and Contact Number Assignments Fourth
Edition
Information Technology - Telecommunications and Information
Exchange between Systems - High-Level Data Link Control (HDLC)
Procedures - Frame Structure Fifth Edition; CAN/CSA-ISO/IEC
3309: 1995
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - High-Level Data Link
Control (HDLC) Procedures - Frame Structure Amendment 4:
Optical Range of FSC Checking 1995
Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic
Tape for Information Interchange Using Phase Encoding at 126
ftpmm (3 200 ftpi) - 63 cpmm (1 600 cpi) Second Edition
4335
4335 DRAFT
AMD 8
4335 DRAFT
AMD 9
6523-1
6523-2
6523 AMD 1
6592
6937
7185
7350
7478
7480
7487-1
7498-3
7498-4
7501-1
Information Technology - Telecommunications and Information
Exchange between Systems - High-Level Data Link Control (HDLC)
Procedures - Elements of Procedures Fifth Edition; Amendment 61995; Amendment 7-1995
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - High-Level Data Link
Control (HDLC) Procedures - Elements of Procedures Amendment 8:
Unnumbered Information Frame with Header Check (UIH)
Command and Response 199
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - High-Level Data Link
Control (HDLC) Procedures - Elements of Procedures Amendment 9:
Span List Encoding of the Information Field in the Multi-SREJ
Frame 1995
Information Technology - Structure for the Identification of
Organizations and Organization Parts - Part 1: Identification of
Organization Identification Schemes First Edition
Information Technology - Structure for the Identification of
Organizations and Organization Parts - Part 2: Registration of
Organization Identification Schemes First Edition
Data Interchange - Structure for the Identification of Organizations
Amendment 1: Guidance on the Use of ISO 6523; (1994)
Information Technology - Guidelines for the Documentation of
Computer-Based Application Systems First Edition
Information Technology - Coded Graphic Character Set for Text
Communication - Latin Alphabet Second Edition
Information Technology - Programming Languages - Pascal Second
Edition; CEN EN 27185: 1992; CAN/CSA-ISO/IEC 7185-95
Information Technology - Registration of Repertoires of Graphic
Characters from ISO/IEC 10367 Second Edition
Corrigendum 1 Information Processing Systems - Data
Communication - Multilink Procedures
Information Technology - Telecommunications and Information
Exchange between Systems - Start-Stop Transmission Signal Quality
at DTE/DCE Interfaces Second Edition; AS/NZS 3618: 1993;
CAN/CSA-ISO/IEC 7480-95
Information Technology - Data Interchange on 130 mm (5,25 in)
Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - ISO
Type 202 - Part 1: Dimensional, Physical and Magnetic Characteristi
Information Technology - Open Systems Interconnection - Basic
Reference Model: Naming and Addressing Second Edition
Information Processing Systems - Open Systems Interconnection Basic Reference Model - Part 4: Management Framework First
Edition
Identification Cards - Machine Readable Travel Documents - Part 1:
7498-1
7501-2
7501-3
7776
7809
7809 DRAFT
AMD 11
7809 DRAFT
AMD 12
7810
7811-1
7811-2
7811-3
7811-6
7812-1
7812-2
7813
7816-7
Machine Readable Passport Third Edition
Information Technology - Open Systems Interconnection - Basic
Reference Model: the Basic Model Second Edition; CEN EN
ISO/IEC 7498-1: 1995; CAN/CSA-ISO/IEC 7498-1-95; Corrected
and Reprinted - 1996; AS/NZS 2777.1: 1996
Identification Cards - Machine Readable Travel Documents - Part 2:
Machine Readable Visa Second Edition
Identification Cards - Machine Readable Travel Documents - Part 3:
Machine Readable Official Travel Documents First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - High-Level Data Link Control
Procedures - Description of the X.25 LAPB-Compatible DTE Data
Link Procedures Second Edition; Amendment 1-11/15/1996
Information Technology - Telecommunications and Information
Exchange Between Systems - High-Level Data Link Control (HDLC)
Procedures - Classes of Procedures Third Edition; Amendment 101995; CAN/CSA-ISO/IEC 7809-95
(Draft)Information Technology - Telecommunications and
Information Exchange Between Systems - High-Level Data Link
Control (HDLC) Procedures - Classes of Procedures Amendment 11:
Unnumbered Information Frame with Header Check (UIH)
Command and Response 199
(Draft)Information Technology - Telecommunications and
Information Exchange Between Systems - High-Level Data Link
Control (HDLC) Procedures - Classes of Procedures Amendment 12:
Span List Encoding of the Information Field in the Multi-SREJ
Frame 1995
Identification Cards - Physical Characteristics Second Edition; CEN
EN ISO/IEC 7810: 1996
Identification Cards - Recording Technique - Part 1: Embossing First
Edition; CEN EN ISO/IEC 7811-1: 1996
Identification Cards - Recording Technique - Part 2: Magnetic Stripe
- Low Coercivity Third Edition; Cancels and Replaces ISO/IEC
7811-2:1995, ISO/IEC 7811-4:1995, ISO/IEC 7811-5:1995
Identification Cards - Recording Technique - Part 3: Location of
Embossed Characters on ID-1 Cards Second Edition; CEN EN
ISO/IEC 7811-3: 1996
Identification Cards - Recording Technique - Part 6: Magnetic Stripe
- High Coercivity Second Edition; Cancels and Replaces ISO/IEC
7811-6: 1996; ISO/IEC 7811-4: 1995; ISO/IEC 7811-5:1995
Identification Cards - Identification of Issuers - Part 1: Numbering
System Second Edition
Identification Cards - Identification of Issuers - Part 2: Application
and Registration Procedures Second Edition
Identification Cards - Financial Transaction Cards Fifth Edition
Indentification Cards - Integrated Circuit(s) Cards with Contacts -
7816-8
7816-9
7816-10
7942-1
7942-2
7942-3
7942-4
8072
8073
8208
8211
8326
8327-1
8327-1
8327-2
8348
Part 7: Interindustry Commands for Structured Card Query Language
(SCQL) First Edition
Indentification Cards - Integrated Circuit(s) Cards with Contacts Part 8: Security Related Interindustry Commands First Edition
Indentification Cards - Integrated Circuit(s) Cards with Contacts Part 9: Additional Interindustry Commands and Security Attributes
First Edition
Indentification Cards - Integrated Circuit(s) Cards with Contacts Part 10: Electronic Signals and Answer to Reset for Synchronous
Cards First Edition
Information Technology - Computer Graphics and Image Processing
- Graphical Kernel System (GKS) - Part 1: Functional Description
Second Edition; CEN ISO/IEC 7942-1: 1995
Information Technology - Computer Graphics and Image Processing
- Graphical Kernel System (GKS) - Part 2: NDC Metafile First
Edition
Information Technology - Computer Graphics and Image Processing
- Graphical Kernel Systems (GKS) - Part 3: Audit Trail First Edition
Information Technology - Computer Graphics and Image Processing
- Graphical Kernel System (GKS) - Part 4: Picture Part Archive First
Edition
Information Technology - Open Systems Interconnection - Transport
Service Definition Third Edition; CAN/CSA-ISO/IEC 8072-95; CEN
EN ISO/IEC 8072: 1995
Information Technology - Open Systems Interconnection - Protocol
for Providing the Connection-Mode Transport Service Fourth
Edition; Amendment 1-1998
Information Technology - Data Communications - X.25 Packet Layer
Protocol for Data Terminal Equipment Fourth Edition
Information Processing - Specification for a Data Descriptive File for
Information Interchange Second Edition; AS/NZS 3654: 1996
Information Technology - Open Systems Interconnection - Session
Service Definition Second Edition; Amendment 1: Efficiency
Enhancements: 10-01-1998; Amendment 2: Nested Connections
Functional Unit: 12-15-1998
Information Technology - Open Systems Interconnection Connection-Oriented Session Protocol: Protocol Specification Second
Edition
Information Technology - Open Systems Interconnection Connection-Oriented Session Protocol: Protocol Specification Second
Edition; Amendment 1: Efficiency Enhancements: 10-01-1998;
Amendment 2: Nested Connections Functional Unit: 12-15-1998
Information Technology - Open Systems Interconnection Connection-Oriented Session Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Network
8441-1
8441-2
8473-1
8473-2
8473-3
8473-4
8473-5
8481
8482
8602
8613-1
8480
8571-1
8571-2
8571-3
Service Definition Third Edition; Amendment 1: 12/15/1998
Information Technology - High Density Digital Recording (HDDR) Part 1: Unrecorded Magnetic Tape for (HDDR) Applications First
Edition
Information Technology - High Density Digital Recording (HDDR) Part 2: Guide for Interchange Practice First Edition
Information Technology - Protocol for Providing the ConnectionlessMode Network Service: Protocol Specification Second Edition
Information Technology - Protocol for Providing the ConnectionlessMode Network Service - Part 2: Provision of the Underlying Service
by an ISO/IEC 8802 Subnetwork First Edition
Information Technology - Protocol for Providing the ConnectionlessMode Network Service: Provision of the Underlying Service by an
X.25 Subnetwork First Edition
Information Technology - Protocol for Providing the ConnectionlessMode Network Service: Provision of the Underlying Service by a
Subnetwork That Provides the OSI Data Link Service First Edition
Information Technology - Protocol for Providing the ConnectionlessMode Network Service: Provision of the Underlying Service by
ISDN Circuit-Switched B-Channels First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - DTE to DTE Direct Connections
Second Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Twisted Pair Multipoint
Interconnections Second Edition
Information Technology - Protocol for Providing the OSI
Connectionless-Mode Transport Service Second Edition; Amendment
1-1996
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Introduction and General Principles Second
Edition; Technical Corrigendum 1: 12-15-1998
Information Technology - Telecommunications and Information
Exchange between Systems - DTE/DCE Interface Back-Up Control
Operation Using ITU-T Recommendation V.24 Interchange Circuits
Second Edition
Information Processing Systems - Open Systems Interconnection File Transfer, Access and Management - Part 1: General Introduction
First Edition; Amendment 1: 1992; Amendment 2: 1993;
Corrigendum 1: 1991
Information Processing Systems - Open Systems Interconnection File Transfer, Access and Management - Part 2: Virtual Filestore
Definition First Edition; Amendment 1: 1992; Amendment 2: 1993;
Corrigendum 1: 1991
Information Processing Systems - Open Systems Interconnection File Transfer, Access and Management - Part 3: File Service
8571-3 DRAFT
AMD 3
8571-4
8571-4 DRAFT
AMD 3
8571-5
8613-2
8613-3
8613-4
8613-5
8613-6
8613-6 DRAFT
AMD 1
8613-8
8613-8 DRAFT
AMD 1
8613-8 DRAFT
AMD 1.2
Definition First Edition; Amendment 1- 1992; Amendment 2- 1993;
Corrigendum 1- 1991; Corrigendum 2- 1992
(Draft)Information Processing Systems - Open Systems
Interconnection - File Transfer, Access and Management - Part 3:
File Service Definition Amendment 3: Service Enhancement 1992;
***CD-ROM ONLY***
Information Processing Systems - Open Systems Interconnection File Transfer, Access and Management - Part 4: File Protocol
Specification First Edition; Amendment 4: 11-15-1992; Corrigendum
1: 10-15-1992; Amendment 1: 12-15-1992; Amendment 2: 08-151993;
(Draft)Information Processing Systems - Open Systems
Interconnection - File Transfer, Access and Management - Part 4:
File Protocol Specification Amendment 3: Service Enhancement
1992
Information Processing Systems - Open Systems Interconnection File Transfer, Access and Management - Part 5: Protocol
Implementation Conformance Statement Proforma First Edition;
AS/NZS 3646.5: 1994
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Document Structures Second Edition; Technical
Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-198
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Abstract Interface for the Manipulation of ODA
Documents First Edition
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Document Profile Second Edition; Technical
Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Open Document Interchange Format Second
Edition; Technical Corrigendum 1: 12-15-1998; Technical
Corrigendum 2: 12-15-1998
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Character Content Architectures Second Edition;
Technical Corrigendum 1: 12-15-1998
(Draft)Information Technology - Open Document Architecture
(ODA) and Interchange Format: Character Content Architectures
Amendment 1: Extensions for Coloured Lines and Emphasis 1995
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Geometric Graphics Content Architectures
Second Edition
(Draft)Information Technology - Open Document Architecture
(ODA) and Interchange Format: Geometric Graphics Content
Architectures Amendment 1 1995
(Draft)Information Technology - Open Document Architecture
(ODA) and Interchange Format: Geometric Graphics Content
8613-9
8613-7
8613-10
8613-11
8613-12
8613-14
8630-2 CORR 1
8630-3 CORR 1
8631
8632-1
8632-2
8632-3
8632-4
8648
8649
Architectures Amendment 1 1995
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Audio Content Architectures First Edition
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Raster Graphics Content Architectures Second
Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 1215-1998
Information Technology - Open Document Architecture (ODA) and
Interchange Format - Part 10: Formal Specifications Second Edition
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Tabular Structures and Tabular Layout First
Edition
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Identification of Document Fragments First
Edition
Information Technology - Open Document Architecture (ODA) and
Interchange Format: Temporal Relationships and Non-Linear
Structures First Edition
Information Processing - Data Interchange on 130 mm (5.25 in)
Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 2:
Track Format A for 77 Tracks 1992; CEN EN 28630-2/A1: 1992
Information Processing - Data Interchange on 130 mm (5.25 in)
Flexible Disk Cartridge Using Modified Frequency Modulation
Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 3:
Track Format B for 80 Tracks 1992
Information Technology - Program Constructs and Conventions for
Their Representation Second Edition; CEN EN 28631: 1993;
NZS/ISO/IEC 8631: 1989
Information Technology - Computer Graphics - Metafile for the
Storage and Transfer of Picture Description Information - Part 1:
Functional Specification Second Edition
Information Technology - Computer Graphics - Metafile for the
Storage and Transfer of Picture Description Information - Part 2:
Character Encoding Second Edition; Amendment 1-1994;
Amendment 2-1995
Information Technology - Computer Graphics - Metafile for the
Storage and Transfer of Picture Description Information - Part 3:
Binary Encoding Second Edition
Information Technology - Computer Graphics - Metafile for the
Storage and Transfer of Picture Description Information - Part 4:
Clear Text Encoding Second Edition
Information Processing Systems - Open Systems Interconnection Internal Organization of the Network Layer First Edition;
Corrigendum 1-1991
Information Technology - Open Systems Interconnection - Service
8650-2
8651-4
8652
8806-4
8824-2
8824-3
8824-4
TR 8802-1
8802-2
8802-3
8802-5
8802-6
8802-11
Definition for the Association Control Service Element Second
Edition; Amendment 1-1997; Amendment 2-1998
Information Technology - Open Systems Interconnection - Protocol
Specification for the Association Control Service Element: Protocol
Implementation Conformance Statement (PICS) Proforma Second
Edition
Information Technology - Computer Graphics - Graphical Kernel
System (GKS) Language Bindings - Part 4: C Second Edition
Information Technology - Programming Languages - Ada Technical
Corrigendum 1:06/01/2001
Information Technology - Computer Graphics - Graphical Kernel
System for Three Dimensions (GKS-3D) Language Bindings - Part 4:
C First Edition
Information Technology - Abstract Syntax Notation One (ASN.1):
Information Object Specification Second Edition; Technical
Corregendum 1: 1999; Amendment 1: 12/01/2000
Information Technology - Abstract Syntax Notation One (ASN.1):
Constraint Specification Second Edition
Information Technology - Abstract Syntax Notation One (ASN.1):
Parameterization of ASN.1 Specifications Second Edition;
Amendment 1: 12/01/2000
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 1: Overview of Local Area Network
Standards Third Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 2: Logical Link Control Third Edition;
ANSI/IEEE 802.2; Technical Corrigendum 1: 10/01/2000
Information Technology - Telecommunications and Information
Exchange Between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 3: Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) Access Method and Physical Layer
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 5: Token Ring Access Method and
Physical Layer Specifications Third Edition; Amendment 1:
09/15/1998;
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 6: Distributed Queue Dual Bus
(DQDB) Access Method and Physical Layer Specifications First
Edition; I
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 11: Wireless LAN Medium Access
8802-12
8807 DRAFT
AMD 1
8822
8823-1
8823-2
8824-1
8825
8825-2
DIS 8825-3
8824-1 DRAFT
AMD 3
8825-1
8859-1
8859-2
Control (MAC) and Physical Layer (PHY) Specifications First
Edition; A
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Specific Requirements - Part 12: Demand-Priority Access Method,
Physical Layer and Repeater Specifications First Edition; ANSI/IEE
(Draft)Information Processing Systems - Open Systems
Interconnection - LOTOS - a Formal Description Technique Based
on the Temporal Ordering of Observational Behaviour Amendment 1:
G-LOTOS 1992
Information Technology - Open Systems Interconnection Presentation Service Definition Second Edition; Amendment 1:
Efficiency Enhancements: 10-01-1998; Amendment 2: Nested
Connections Functional Unit: 12-15-1998
Information Technology - Open Systems Interconnection Connection-Oriented Presentation Protocol: Protocol Specification
Second Edition; Amendment 1: Efficiency Enhancements: 09-151998; Amendment 2: Nested Connections Functional Unit: 12-151998
Information Technology - Open Systems Interconnection Connection-Oriented Presentation Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma Second Edition
Information Technology - Abstract Syntax Notation One (ASN.1):
Specification of Basic Notation Second Edition; Technical
Corrigendum 1: 12/15/1999; Amendment 2: 10/15/2000; Amendment
1: 12/01/2000
Information Technology - Open Systems Interconnection Specification of Basic Encoding Rules for Abstract Syntax Notation
One (ASN.1) Second Edition
Information Technology - ASN.1 Encoding Rules: Specification of
Packed Encoding Rules (PER) Second Edition; Technical
Corrigendum 1: 12/15/1999; Amendment 1: 12/01/2000
(Draft)Information Technology - Open Systems Interconnection Specification of ASN.1 Encoding Rules - Part 3: Distinguished
Canonical Encoding Rules
(Draft)Information Technology - Open Systems Interconnection Abstract Syntax Notation One (ASN.1) - Part 1: Specification of
Basic Notation Amendment 3: Rules for Extensibility 1994; ***CDROM ONLY***
Information Technology - ASN.1 Encoding Rules: Specification of
Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and
Distinguished Encoding Rules (DER) Second Edition; Technical
Corrigendum 1: 12/15/1999; Amendment 1: 12/01/2000
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 1: Latin Alphabet No. 1 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
8859-3
8859-4
8859-5
8859-6
8859-8
8859-9
8859-10
8859-13
8859-14
8859-15
8859-16
8860-1
8860-2
8877
8881
8882-1
8886
9040
Character Sets - Part 2: Latin Alphabet No. 2 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 3: Latin Alphabet No.3 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 4: Latin Alphabet No. 4 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 5: Latin/Cyrillic Alphabet Second Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 6: Latin/Arabic Alphabet First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 8: Latin/Hebrew Alphabet First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 9: Latin Alphabet No. 5 Second Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 10: Latin Alphabet No. 6 Second Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 13: Latin Alphabet No.7 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 14: Latin Alphabet No.8 (Celtic) First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 15: Latin Alphabet No. 9 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic
Character Sets - Part 16: Latin Alphabet No. 10 First Edition
Information Processing - Data Interchange on 90 mm (3.5 in)
Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 1:
Dimensional, Physical and Magnetic Charactistics First Edition;
Corrigend
Information Processing - Data Interchange on 90 mm (3.5 in)
Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 2: Track
Format First Edition; Corrigendum 1-1990
Information Technology - Telecommunications and Information
Exchange between Systems - Interface Connector and Contact
Assignments for ISDN Basic Access Interface Located at Reference
Points S and T Second Edition; CEN EN 28877: 1993
Information Processing Systems - Data Communications - Use of the
X.25 Packet Level Protocol in Local Area Networks First Edition;
Corrigendum 1-1991
Information Technology - Telecommunications and Information
Exchange between Systems - X.25 DTE Conformance Testing - Part
1: General Principles Second Edition
Information Technology - Open Systems Interconnection - Data Link
Service Definition Second Edition
Information Technology - Open Systems Interconnection - Virtual
Terminal Basic Class Service Second Edition
8878
8879
8882-2
8882-3
8885
8885 DRAFT
AMD 10
8885 DRAFT
AMD 11
9041-1
9041-2
9066-1
9066-2
9066-3
9070
9072-1
Information Technology - Telecommunications and Information
Exchange Between Systems - Use of X.25 to Provide the OSI
Connection-Mode Network Service Second Edition; Corrigendum 11993; Corrigendum 2-1993; Corrigendum 3-1996
Information Processing - Text and Office Systems - Standard
Generalized Markup Language (SGML) First Edition; Amendment 1:
07/01/1988; Technical Corrigendum 1: 12/15/1996; Technical
Corrigendum 2: 11/01/1999
Information Technology - Telecommunications and Information
Exchange between Systems - X.25 DTE Conformance Testing - Part
2: Data Link Layer Conformance Test Suite Third Edition
Information Technology - Telecommunications and Information
Exchange between Systems - X.25 DTE Conformance Testing - Part
3: Packet Layer Conformance Test Suite Third Edition
Information Technology - Telecommunications and Information
Exchange between Systems - High-Level Data Link Control (HDLC)
Procedures - General Purpose XID Frame Information Field Content
& Format Third Edition; Amendment 9-1995; AS/NZS 3624: 1994;
CAN/CSA
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - High-Level Data Link
Control (HDLC) Procedures - General Purpose XID Frame
Information Field Content and Format Amendment 10: Unnumbered
Information Frame with He
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - High- Level Data Link
Control (HDLC) Procedures - General Purpose XID Frame
Information Field Content and Format Amendment 11: Span List
Encoding of the Informati
Information Technology - Open Systems Interconnection - Virtual
Terminal Basic Class Protocol - Part 1: Specification Second Edition
Information Technology - Open Systems Interconnection - Virtual
Terminal Basic Class Protocol - Part 2: Protocol Implementation
Conformance Statement (PICS) Proforma Second Edition
Information Processing Systems - Text Communication - Reliable
Transfer - Part 1: Model and Service Definition First Edition
Information Processing Systems - Text Communication - Reliable
Transfer - Part 2: Protocol Specification First Edition
Information Technology - Open Systems Interconnection - Reliable
Transfer: Protocol Implementation Conformance Statement (PICS)
Proforma First Edition
Information Technology - SGML Support Facilities - Registration
Procedures for Public Text Owner Identifiers Second Edition; CEN
EN 29070: 1992; AS/NZS 4097: 1993
Information Processing Systems - Text Communication - Remote
Operations - Part 1: Model, Notation and Service Definition First
DIS 9072-1
DIS 9072-2
9072-2
9072-3
9075-1
9075-2
9075-3
9075-4
9075-5
9075-9
9075-10
9171-1
9171-2
9281-1
9281-2
9293
TR 9294
9314-3
Edition; NZS/ISO/IEC 9072.1: 1989
(Draft)Information Technology - Remote Operations - Part 1:
Concepts, Model and Notation
(Draft)Information Technology - Remote Operations - Part 2: OSI
Realisations - Remote Operations Service Element (ROSE) Service
Definition
Information Processing Systems - Text Communication - Remote
Operations - Part 2: Protocol Specification First Edition;
NZS/ISO/IEC 9072.2: 1989
Information Technology - Open Systems Interconnection - Remote
Operations: Protocol Implementation Conformance Statement (PICS)
Proforma First Edition
Information Technology - Database Languages - SQL - Part 1:
Framework (SQL/Framework) First Edition; Amendment 1:
03/15/2001
Information Technology - Database Languages - SQL - Part 2:
Foundation (SQL/Foundation) First Edition; Amendment 1:
03/15/2001
Information Technology - Database Languages - SQL - Part 3: CallLevel Interface (SQL/CLI) Second Edition; Corrigendum 1:
12/15/2000
Information Technology - Database Languages - SQL - Part 4:
Persistent Stored Modules (SQL/PSM) Second Edition; Corrigendum
1: 12/15/2000
Information Technology - Database Languages - SQL - Part 5: Host
Language Bindings (SQL/Bindings) First Edition; Amendment 1:
03/15/2001
Information Technology - Database Languages - SQL - Part 9:
Management of External Data (SQL/MED) First Edition
Information Technology - Database Languages - SQL - Part 10:
Object Language Bindings (SQL/OLB) First Edition
Information Technology - 130 mm Optical Disk Cartridge, Write
Once, for Information Interchange - Part 1: Unrecorded Optical Disk
Cartridge First Edition; CEN EN 29171-1: 1993
Information Technology - 130 mm Optical Disk Cartridge, Write
Once, for Information Interchange - Part 2: Recording Format First
Edition; CEN EN 29171-2: 1993
Information Technology - Picture Coding Methods - Part 1:
Identification First Edition
Information Technology - Picture Coding Methods - Part 2:
Procedure for Registration First Edition
Information Technology - Volume and File Structure of Disk
Cartridges for Information Interchange Second Edition
Information Technology - Guidelines for the Management of
Software Documentation First Edition
Information Processing Systems - Fibre Distributed Data Interface
9314-4
9314-5
9314-6
9314-7
9314-8
9314-9
9314-13
9314-20
9316
9316-2
9318-2
9314-21
9314-25
9318-3
9318-4
DIS 9496
9506-1
(FDDI) - Part 3: Physical Layer Medium Dependent (PMD) First
Edition; NZS/ISO/IEC 9314.3: 1990; CEN EN ISO/IEC 9314-3:
1995
Information Technology - Fibre Distributed Data Interface (FDDI) Part 4: Single-Mode Fiber Physical Layer Medium Dependent (SMFPMD) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 5: Hybrid Ring Control (HRC) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 6: Station Management (SMT) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 7: Physical Layer Protocol (PHY-2) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI)Part 8: Media Access Control-2 (MAC-2) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 9: Low-Cost Fibre Physical Layer Medium Dependent (LCFPMD) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 13: Conformance Test Protocol Implementation Conformance
Statement Proforma (CT-PICS) Proforma First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 20: Abstract Test Suite for FDDI Physical Medium Dependent
Conformance Testing (PMD ATS) First Edition
Information Technology - Small Computer System Interface-2
Second Edition
Information Technology - Small Computer System Interface-2
(SCSI-2) - Part 2: Common Access Method (CAM) Transport and
SCSI Interface Module First Edition
Information Technology - Intelligent Peripheral Interface Part 2:
Device Specific Command Set for Magnetic Disk Drives First
Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 21: Abstract Test Suite for FDDI Physical Layer Protocol
Conformance Testing (PHY ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) Part 25: Abstract Test Suite for FDDI - Station Management
Conformance Testing (SMT-ATS) First Edition
Information Technology - Intelligent Peripheral Interface Part 3:
Device Generic Command Set for Magnetic and Optical Disk Drives
First Edition
Information Technology - Intelligent Peripheral Interface Part 4:
Device Generic Command Set for Magnetic Tape Drives First
Edition; CEN EN 29318-4: 1993
(Draft)CHILL: The ITU-T Programming Language
Industrial Automation Systems - Manufacturing Message
Specification - Part 1: Service Definition First Edition; Replaces ISO
9506-2
9506-6
9529-1
9529-2
9541-1
9541-1 DRAFT
AMD 2
9541-2
9541-3
9542
DIS 9542
9545
9548-1
9548-2
9549
9542 DRAFT
TR 13345
Industrial Automation Systems - Manufacturing Message
Specification - Part 2: Protocol Specification First Edition; Corrected
and Reprinted: 12/15/2000
Industrial Automation Systems - Manufacturing Message
Specification - Part 6: Companion Standard for Process Control First
Edition
Information Processing Systems - Data Interchange on 90 mm (3,5
in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 1:
Dimensional, Physical and Magnetic Characteristics F First Edit
Information Processing Systems - Data Interchange on 90 mm (3,5
in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 2:
Track Format First Edition
Information Technology - Font Information Interchange - Part 1:
Architecture First Edition; Technical Corrigendum 1: 10/01/1992;
Technical Corrigendum 2: 07/15/1994; Technical Corrigendum 3:
07/01/1995; Amendment 1: 1/15/2001
(Draft)Information Technology - Font Information Interchange - Part
1: Architecture; Amendment 2: Minor Enhancements to the
Architecture to Address Font Technology Advances 1997
Information Technology - Font Information Interchange - Part 2:
Interchange Format First Edition; Corrigendum 1: 1993;
Corrigendum 2: 1995; Amendment 1: 12/15/2000
Information Technology - Font Information Interchange - Part 3:
Glyph Shape Representation First Edition
Information Processing Systems - Telecommunications and
Information Exchange between Systems - End System to
Intermediate System Routeing Exchange Protocol for Use in
Conjunction with the Protocol for Providing the ConnectionlessMode Network Service (ISO
(Draft)Information Technology - End System to Intermediate System
Routeing Information Exchange Protocol for Use in Conjunction with
the Protocol for Providing the Connectionless-Mode Network Service
Information Technology - Open Systems Interconnection Application Layer Structure Second Edition
Information Technology - Open Systems Interconnection Connectionless Session Protocol: Protocol Specification First
Edition; Amendment 1: 12/15/2000
Information Technology - Open Systems Interconnection Connectionless Session Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Galvanic Isolation of Balanced Interchange
Circuits First Edition; AS/NZS 4162: 1994
(Draft)Information Processing Systems - Telecommunications and
AMD 2
9542 DRAFT
AMD 2.2
9542: FDAM 3
TR 9573
TR 9573-11
TR 9573-13
9574
TR 9575
9576-1
9576-2
TR 9577
TR 9578
9579
9592-1
9592-2
Information Exchange between Systems - End System to
Intermediate System Routeing Exchange Protocol for Use in
Conjunction with the Protocol for Providing the ConnectionlessMode Network Servic
(Draft)Information Processing Systems - Telecommunications and
Information Exchange between Systems - End System to
Intermediate System Routeing Exchange Protocol for Use in
Conjunction with the Protocol for Providing the ConnectionlessMode Network Servic
(Draft)Information Processing Systems - Telecommunications and
Information Exchange between Systems - End System to
Intermediate System Routeing Exchange Protocol for Use in
Conjunction with the Protocol for Providing the ConnectionlessMode Network Servic
Information Processing - SGML Support Facilities - Techniques for
Using SGML First Edition
Information Processing - SGML Support Facilities - Techniques for
Using SGML - Part 11: Application at ISO Central Secretariat for
International Standards and Technical Reports First Edition; AS/NZS
3967.11: 1994
Information Technology - SGML Support Facilities - Techniques for
Using SGML - Part 13: Public Entity Sets for Mathematics and
Science First Edition
Information Technology - Provision of the OSI Connection-Mode
Network Service by Packet Mode Terminal Equipment to an
Integrated Services Digital Network (ISDN) Second Edition;
AS/NZS 4099: 1994
Information Technology - Telecommunications and Information
Exchange between Systems - OSI Routeing Framework Second
Edition; NZS/ISO/IEC TR 9575: 1990
Information Technology - Open Systems Interconnection Connectionless Presentation Protocol: Protocol Specification Second
Edition; Amendment 1: 12/15/2000
Information Technology - Open Systems Interconnection Connectionless Presentation Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Protocol Identification in the Network
Layer Fourth Edition
Information Technology - Communication Interface Connectors Used
in Local Area Networks First Edition
Information Technology - Remote Database Access for SQL with
Security Enhancement Second Edition
Information Technology - Computer Graphics and Image Processing
- Programmer's Hierarchical Interactive Graphics System (PHIGS) Part 1: Functional Description Second Edition
Information Technology - Computer Graphics and Image Processing
FDIS 9594-1
9594-1
FDIS 9594-2
9594-2
9594-3
9592-3
9593-1
9593-3
9593-4
FDIS 9594-3
FDIS 9594-4
9594-4
9594-5
9594-6
9594-7
9594-8
9594-9
- Programmer's Hierarchical Interactive Graphics System (PHIGS) Part 2: Archive File Format Second Edition
(Draft)Information Technology - Open Systems Interconnection The Directory: Overview of Concepts, Models and Services 2001
Information Technology - Open Systems Interconnection - The
Directory: Overview of Concepts, Models and Services Third Edition
(Draft)Information Technology - Open Systems Interconnection The Directory: Models 2001
Information Technology - Open Systems Interconnection - The
Directory: Models Third Edition
Information Technology - Open Systems Interconnection - The
Directory: Abstract Service Definition Third Edition
Information Technology - Computer Graphics and Image Processing
- Programmer's Hierarchical Interactive Graphics System (PHIGS) Part 3: Specification for Clear-Text Encoding of Archive File Second
Edition
Information Processing Systems - Computer Graphics - Programmer's
Hierarchical Interactive Graphics System (PHIGS) Language
Bindings - Part 1: FORTRAN First Edition; Corrigendum 1-1993;
Corrigendum 2-1994; Amendment 1- 1995; NZS/ISO/IEC 9593.1:
1990
Information Technology - Computer Graphics - Programmer's
Hierarchical Interactive Graphics System (PHIGS) Language
Bindings - Part 3: Ada First Edition; Amendment 1-1994;
Corrigendum 1-1993; Corrigendum 2-1994
Information Technology - Computer Graphics - Programmer's
Hierarchical Interactive Graphics System (PHIGS) Language
Bindings - Part 4: C First Edition; Amendment 1: 05-01-1994;
Technical Corrigendum 1: 08-01-1994; Amendment 2: Incorporation
of PHIGS Amendm
(Draft)Information Technology - Open Systems Interconnection The Directory: Abstract Service Definition 2001
(Draft)Information Technology - Open Systems Interconnection The Directory: Procedures for Distributed Operation 2001
Information Technology - Open Systems Interconnection - The
Directory: Procedures for Distributed Operation Third Edition
Information Technology - Open Systems Interconnection - The
Directory: Protocol Specifications Third Edition
Information Technology - Open Systems Interconnection - The
Directory: Selected Attribute Types Third Edition
Information Technology - Open Systems Interconnection - The
Directory: Selected Object Classes Third Edition
Information Technology - Open Systems Interconnection - The
Directory: Public-Key and Attribute Certificate Frameworks Fourth
Edition
Information Technology - Open Systems Interconnection - The
9594-10
DIS 9594-11
9595
9596-1
9596-2
9636-2
9636-3
9636-4
9636-1
9636-5
9636-6
9637-1
9637-2
9638-3
9646-1
Directory: Replication Second Edition
Information Technology - Open Systems Interconnection - The
Directory - Part 10: Use of Systems Management for Administration
of the Directory First Edition
(Draft)Information Technology - Open Systems Interconnection - the
Directory - Part 11: Directory System Protocol - Protocol
Implementation Conformance Statement (PICS)
Information Technology - Open Systems Interconnection - Common
Management Information Service Third Edition
Information Technology - Open Systems Interconnection - Common
Management Information Protocol - Part 1: Specification Third
Edition; Technical Corrigendum 1: 12/15/1999
Information Technology - Open Systems Interconnection - Common
Management Information Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition; Technical
Corrigendum 1: 06/15/1993; Technical Corrigendum 2: 12/15/1996;
Technical
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 2: Control First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 3: Output First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 4: Segments First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 1: Overview, Profiles, and Conformance First
Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 5: Input and Echoing First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 6: Raster First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Data
Stream Binding - Part 1: Character Encoding First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Data
Stream Binding - Part 2: Binary Encoding First Edition
Information Technology - Computer Graphics - Interfacing
Techniques for Dialogues with Graphical Devices (CGI) - Language
Bindings - Part 3: Ada First Edition
Information Technology - Open Systems Interconnection -
9646-2
9646-3
61482-1
61643-1
61850-4
61892-1
61643-12
61753-051-3
61753-052-3
61960-1
61993-2
TR 62059-11
62262
62271-102
CISPR 24
Conformance Testing Methodology and Framework - Part 1: General
Concepts Second Edition; CEN EN 29646-1: 1992; CAN/CSAISO/IEC 9646-1-95 CEN EN ISO/IEC 9646-1: 1996
Information Technology - Open Systems Interconnection Conformance Testing Methodology and Framework - Part 2: Abstract
Test Suite Specification Second Edition; CAN/CSA-ISO/IEC-96462-95; CEN EN ISO/IEC 9646-2: 1996
Information Technology - Open Systems Interconnection Conformance Testing Methodology and Framework - Part 3: The
Tree and Tabular Combined Notation (TTCN) Second Edition
Live Working - Flame-Resistant Materials for Clothing for Thermal
Protection of Workers - Thermal Hazards of an Electric Arc - Part 1:
Test Methods First Edition
Surge Protective Devices Connected to Low-Voltage Power
Distribution Systems - Part 1: Performance Requirements and Testing
Methods Edition 1.1
Communication Networks and Systems in Substations - Part 4:
System and Project Management First Edition
Mobile and Fixed Offshore Units - Electrical Installations - Part 1:
General Requirements and Conditions First Edition
Low-Voltage Surge Protective Devices - Part 12: Surge Protective
Devices Connected to Low-Voltage Power Distribution Systems Selection and Application Principles First Edition
"Fibre Optic Interconnecting Devices and Passive Components
Performance Standard - Part 051-3: Single-Mode Fibre
"Fibre Optic Interconnecting Devices and Passive Components
Performance Standard - Part 052-3: Single-Mode Fibre
Secondary Lithium Cells and Batteries for Portable Applications Part 1: Secondary Lithium Cells First Edition; Corrigendum 1
02/2002
"Maritime Navigation and Radiocommunication Equipment and
Systems - Automatic Identification Systems (AIS)- Part 2: Class A
Shipborne Equipment of the Universal Automatic Identification
System (AIS) - Operational and Performance Requirements
Electricity Metering Equipment - Dependability - Part 11: General
Concepts First Edition
Degrees of Protection Provided by Enclosures for Electrical
Equipment Against External Mechanical Impacts (IK Code) First
Edition
"High-Voltage Switchgear and Controlgear - Part 102: High-Voltage
Alternating Current Disconnectors and Earthing Switches First
Edition; Cancels and Replaces IEC 60129-1984 and Replaces IEC
61128
Information Technology Equipment - Immunity Characteristics Limits and Methods of Measurement First Edition; Amendment 1:072001
PAS 61076-3109
TR CISPR 16-3
60601-2-33
TR 61000-3-5
1539-1
CISPR 16-4
TS 60034-26
60050-131
60050-521
60061-1
60061-2
60061-3
TS 60071-5
60073
60076-4
60079-10
60081
60127-4
Connectors for Electronic Equipment - Part 3-109: Detail
Specification for Two-Part Cable to Board Connector for High Speed
Data Application in a Harsh Industrial Environment - Protection Rate
IP67 According to IEC 60529 Edition 1.0
Specification for Radio Disturbance and Immunity Measuring
Apparatus and Methods - Part 3: Reports and Recommendations of
CISPR First Edition;Amendment 1 06-2002
Medical Electrical Equipment - Part 2-33: Particular Requirements
for the Safety of Magnetic Resonance Equipment for Medical
Diagnosis Second Edition
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 5:
Limitation of Voltage Fluctuations and Flicker in Low-Voltage
Power Supply Systems for Equipment with Rated Current Greater
Than 16 A First Edition
Information Technology - Programming Languages - Fortran - Part 1:
Basic Language Technical Corrigendum 1:06/01/2001; Technical
Corrigendum 2; 6/15/2002
Specification for Radio Disturbance and Immunity Measuring
Apparatus and Methods - Part 4: Uncertainty in EMC Measurements
First Edition
Rotating Electric Machines - Part 26: Effects of Unbalanced Voltages
on the Performance of Three-Phase Induction Motors First Edition
International Electrotechnical Vocabulary - Part 131: Circuit Theory
Second Edition
International Electrotechnical Vocabulary Chapter 521:
Semiconductor Devices and Integrated Circuits Second Edition
"Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 1: Lamp Caps Edition 3.26;
Amended in Accordance with Supplements: A(1970)
"Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 2: Lampholders Edition 3.23;
Amended in Accordance with Supplements: A(1970)
"Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 3: Gauges Edition 3.25;
Amended in Accordance with Supplements: A(1970)
Insulation Co-Ordination Part 5: Procedures for High-Voltage Direct
Current (HVDC) Converter Stations First Edition
"Basic and Safety Principles for Man-Machine Interface
Power Transformers-Part 4: Guide to the Lightning Impulse and
Switching Impulse Testing - Power Transformers and Reactors First
Edition
Electrical Apparatus for Explosive Gas Atmospheres Part - 10:
Classification of Hazardous Areas Fourth Edition
Double-Capped Fluorescent Lamps - Performance Specifications
Edition 5.1
Miniature Fuses - Part 4: Universal Modular Fuse-Links (UMF)
60191-2
60191-6-12
60269-2-1
60287-1-3
60313
60317-27
60325
60335-1
60335-2-2
60335-2-89
60335-2-90
60352-1
60353
60364-5-53
60364-5-54
60364-5-55
60364-5-56
Second Edition; Amendement 1: 06 2002
"Mechanical Standardization of Semiconductor Devices - Part 2:
Dimensions First Edition;Y(1966);A
Mechanical Standardization of Semiconductor Devices - Part 6-12:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Design Guide for FinePitch Land Grid Array (FLGA) - Rectangular Type First Edition
Low-Voltage Fuses - Part 2-1: Supplementary Requirements for
Fuses for Use by Authorized Persons (Fuses Mainly for Industrial
Application) - Sections I to V: Examples of Types of Standardized
Fuses Edition 3.2; Edition 3: 1998 Consolidated with Amendments
Electric Cables - Calculation of the Current Rating - Part 1-3: Current
Rating Equations (100% Load Factor) and Calculation of Losses Current Sharing between Parallel Single-Core Cables and Calculation
of Circulating Current Losses First Edition
Coaxial Connectors Used in Nuclear Laboratory Instrumentation
Third Edition
Specifications for Particular Types of Winding Wires - Part 27:
Enamelled Tape Covered Rectangular Copper Wire Third Edition;
Amendment 1: 10-1999; Corrigendum 1 04-2002
"Radiation Protection Instrumentation - Alpha
Household and Similar Electrical Appliances - Safety - Part 1:
General Requirements Fourth Edition; Corrigendum 1: 01/2002
Household and Similar Electrical Appliances - Safety - Part 2-2:
Particular Requirements for Vacuum Cleaners and Water-Suction
Cleaning Appliances Fifth Edition
Household and Similar Electrical Appliances - Safety - Part 2-89:
Particular Requirements for Commercial Refrigerating Appliances
with an Incorporated or Remote Refrigerant Condensing Unit or
Compressor First Edition
Household and Similar Electrical Appliances - Safety - Part 2-90:
Particular Requirements for Commercial Microwave Ovens Second
Edition
"Solderless Connections - Part 1: Wrapped Connections - General
Requirements
Line Traps for A.C. Power Systems Second Edition; Amendment 1
04-2002
"Electrical Installations of Buildings - Part 5-53: Selection and
Erection of Electrical Equipment - Isolation
"Electrical Installations of Buildings - Part 5-54: Selection and
Erection of Electrical Equipment - Earthing Arrangements
Electrical Installations of Buildings - Part 5-55: Selection and
Erection of Electrical Equipment - Other Equipment Edition 1.1;
Edition 1: 2001 Consolidated with Amendment 1: 2001
Electrical Installations of Buildings - Part 5: Selection and Erection of
Electrical Equipment - Chapter 56: Safety Services Edition 1.1;
60364-7-712
60399
60400
60417-1
60417-2
60470
60519-6
60598-2-20
60601-2-1
60603-7-7
60626-3
60669-2-2
60684-3-211
60684-3-240 TO
243
60684-3-300
60684-3-320
60684-3-343 TO
345
60684-3-400 TO
402
Edition 1: 1980 Consolidated with Amendment 1: 1998
Electrical Installations of Buildings - Part 7-712: Requirements for
Special Installations or Locations - Solar Photovoltaic (PV) Power
Supply Systems First Edition
Standard Sheets for Barrel Thread for E14 and E27 Lampholders with
Shade Holder Ring Edition 1.2
Lampholders for Tubular Fluorescent Lamps and Starterholders Sixth
Edition; Amendment 1: 05/2002
Graphical Symbols for Use on Equipment - Part 1: Overview and
Application Third Edition
Graphical Symbols for Use on Equipment - Part 2: Symbol Originals
First Edition; Amendment 1 10-2000; Amendment 2:5-2002
High-Voltage Alternating Current Contactors and Contactor-Based
Motor-Starters Second Edition; Cancels and Replaces IEC 60632-1
Safety in Electroheat Installations Part 6: Specifications for Safety in
Industrial Microwave Heating Equipment First Edition; Corrigendum
Luminaires - Part 2-20: Particular Requirements - Lighting Chains
Edition 2.2; Edition 2: 1996 Consolidated with Amendments 1:1998
and 2:2002
Medical Electrical Equipment - Part 2-1: Particular Requirements for
the Safety of Electron Accelerators in the Range 1 MeV to 50 MeV
Second Edition; Amendment 1: 05-2002
"Connectors for Electronic Equipment - Part 7-7: Detail Specification
for 8-Way
Combined Flexible Materials for Electrical Insulation - Part 3:
Specifications for Individual Materials Edition 2.1; Edition 2: 1996
Consolidated with Amendment 1: 1999
Switches for Household and Similar Fixed Electrical Installations Part 2: Particular Requirements - Section 2: Remote-Control
Switches (RCS) Edition 2.1; Edition 2:1996 Consolidated with
Amendment 1:1997
"Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 211: Heat-Shrinkable Sleeving
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheets 240 to 243: Heat-Shrinkable PTFE
Sleeving Second Edition
"Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 300: Glass Textile Fibre Sleeving
"Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 320: Polyethylene Terephthalate Textile
Sleeving
"Flexible Insulating Sleeving - Part 3: Specification for Individual
Types of Sleeving - Sheets 343 to 345: Expandable Braided Ethylene
Chlorotrifluoroethylene (E-CTFE) Textile Sleeving
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheets 400 to 402: Glass Textile Sleeving with
60684-3-403 TO
405
60684-3-420 TO
422
60688
60695-1-30
TR 60695-7-2
60695-10-3
60730-2-4
60731
60747-5-1
60747-16-3
60748-1
60748-23-1
60748-23-2
60748-23-3
60748-23-4
60749-12
Silicone Elastomer Coating Second Edition
Flexible Insulating Sleeving - Part 3: Specification Individual Types
of Sleeving - Sheets 403 to 405: Glass Textile Sleeving with Acrylic
Based Coating Second Edition
Flexible Insulating Sleeving - Part 3: Specification for Individual
Types of Sleeving - Sheets 420 to 422: Polyethylene Terephthalate
Textile Sleeving with Acrylic Based Coating Second Edition
Electrical Measuring Transducers for Converting a.c. Electrical
Quantities to Analogue or Digital Signals Edition 2.2; Edition 2: 1992
Consolidated with Amendment 1:1997 and 2:2001
Fire Hazard Testing - Part 1-30: Guidance for Assessing the Fire
Hazard of Electrotechnical Products - Use of Preselection Testing
Procedures First Edition
Fire Hazard Testing - Part 7-2: Toxicity of fire Effluent - Summary
and Relevance of Test Methods First Edition
Fire Hazard Testing - Part 10-3: Abnormal Heat - Mould Stress
Relief Distortion Test First Edition
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Thermal Motor Protectors for MotorCompressors of Hermetic and Semi-Hermetic Type First Edition;
Amendment 1: 02/1994; Amendment 2: 11/2001; CENELEC EN
60730-2Medical Electrical Equipment - Dosimeters with Ionization Chambers
as Used in Radiotherapy Second Edition; Amendment 1 06-2002
Discrete Semiconductor Devices and Integrated Circuits - Part 5-1:
Optoelectronic Devices - General Edition 1.2; Edition 1:1997
Consolidated with Amendments 1:2001 and 2:2002
Semiconductor Devices - Part 16-3: Microwave Integrated Circuits Frequency Converters First Edition
Semiconductor Devices - Integrated Circuits - Part 1: General Second
Edition
Semiconductor Devices - Integrated Circuits - Part 23-1: Hybrid
Integrated Circuits and Film Structures - Manufacturing Line
Certification - Generic Specification First Edition
Semiconductor Devices - Integrated Circuits - Part 23-2: Hybrid
Integrated Circuits and Film Structures - Manufacturing Line
Certification - Internal Visual Inspection and Special Tests First
Edition; IECQ QC 165000-2
Semiconductor Devices - Integrated Circuits - Part 23-3: Hybrid
Integrated Circuits and Film Structures - Manufacturing Line
Certification - Manufacturers' Self-Audit Checklist and Report First
Edition
Semiconductor Devices - Integrated Circuits - Part 23-4: Hybrid
Integrated Circuits and Film Structures - Manufacturing Line
Certification - Blank Detail Specification First Edition
"Semiconductor Devices - Mechanical and Climatic Test Methods -
PAS 60793-1-49
60809
60846
60862-2
60884-1
60898-1
60900
60936-1
60936-3
60984
TR 61000-1-3
TR 61000-5-6
61008-1
61010-1
61076-2-102
PAS 61076-3104
61111
61112
Part 12: Vibration
Optical Fibres - Part 1-49: Measurement Methods and Test
Procedures - Differential Mode Delay Edition 1.0
"Lamps for Road Vehicles - Dimensional
"Radiation Protection Instrumentation - Ambient and/or Directional
Dose Equivalent (Rate) Meters and/or Monitors for Beta
Surface Acoustic Wave (SAW) Filters of Assesses Quality - Part 2:
Guidance on Use Second Edition
Plugs and Socket-Outlets for Household and Similar Purposes - Part
1: General Requirements
Electrical Accessories - Circuit-Breakers for Overcurrent Protection
for Household and Similar Installations First Edition; Amendment 1:
05-2002
Hand Tools for Live Working up to 1000 V A.C. and 1500 V D.C.
First Edition; CENELEC EN 60900: 1993; Amendment 1-1995;
Corrigendum 05-2000; Amendment 2: 05-2002
Maritime Navigation and Radiocommunication Equipment and
Systems - Radar - Part 1: Shipborne Radar - Performance
Requirements - Methods of Testing and Required Test Results First
Edition; Amendment 1:6 2002
Maritime Navigation and Radiocommunication Equipment and
Systems - Radar - Part 3: Radar with Chart Facilities - Performance
Requirements - Methods of Testing and Required Test Results First
Edition
Sleeves of Insulating Material for Live Working First Edition;
Corrigendum 03/1990; CENELEC EN 60984: 1992; Corrigendum 2:
05-2000; Amendment 1: 05-2002
Electromagnetic Compatibility (EMC) - Part 1-3: General - The
Effects of High-Altitude EMP (HEMP) on Civil Equipment and
Systems First Edition; (English Only)
Electromagnetic Compatibility (EMC) - Part 5-6: Installation and
Mitigation Guidelines - Mitigation of External EM Influences First
Edition; (English Only)
Residual Current Operated Circuit-Breakers without Integral
Overcurrent Protection for Household and Similar Uses (RCCBs) Part 1: General Rules Second Edition; Amendement 1: 06 2002
"Safety Requirements for Electrical Equipment for Measurement
Connectors for Electronic Equipment - Part 2-102: Circular
Connectors with Assessed Quality - Detail Specification for Plugs
and Jacks for External Low Voltage Power Supply First Edition;
IECQ QC 480101
"Connectors for Electronic Equipment - Part 3-104: Detail
Specification for 8-Way
Matting of Insulating Material for Electrical Purposes First Edition;
Corrigendum: 05-2000; Amendment 1: 05-2002
Blankets of Insulating Material for Electrical Purposes First Edition;
61156-5-1
61156-5-2
61156-6-1
61156-6-2
61207-3
61229
61243-2
61340-2-1
TS 61370
61377-2
61477
61479
61481
61523-2
61537
61559-2
61672-1
61674
Corrigendum: 05-2000; Amendment 1: 05-2002
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 5-: Symmetrical Pair/Quad Cables with
Transmission Characteristics up to 600 MHz - Horizontal Floor
Wiring - Capability Approval - Blank Detail Specification First
Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 5-2: Symmetrical Pair/Quad Cables with
Transmission Characteristics up to 600 MHz - Horizontal Floor
Wiring - Capability Approval - Section Specification First Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 6-1: Symmetrical Pair/Quad Cables with
Transmission Characteristics up to 600 MHz - Work Area Wiring Blank Detail Specification First Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 6-2: Symmetrical Pair/Quad Cables with
Transmission Characteristics up to 600 MHz - Work Area Wiring Capability Approval - Sectional Specification First Edition
Gas Analyzers - Expression of Performance - Part 3: Paramagnetic
Oxygen Analyzers Second Edition
Rigid Protective Covers for Live Working on a.c. Installations First
Edition; Amendment 1-1998; Corrigendum 05-2000; Amendment 2:
05-2002
Live Working - Voltage Detectors - Part 2: Resistive Type to Be
Used for Voltages of 1 kV to 36 kV a.c. Edition 1.1; Edition 1:1995
Consolidated with Amendment 1:1999; Amendment 2: 2002
Electrostatics - Part 2-1: Measurement Methods - Ability of Materials
and Products to Dissipate Static Electric Charge First Edition
Steam Turbines - Steam Purity First Edition
Railway Applications - Rolling Stock - Combined Testing - Part 2:
Chopper-Fed Direct Current Traction Motors and Their Control
"Live Working - Minimum Requirements for the Utilization of Tools
Live Working - Flexible Conductor Covers (Line Hoses) of
Insulating Material First Edition; Amendment 1: 05-2002
Live Working - Portable Phase Comparators for Use on Voltages
from 1 kV to 36 kV a.c. First Edition; Amendment 1: 05-2002
Delay and Power Calculation Standards - Part 2: Pre-Layout Delay
Calculation Specification for CMOS ASIC Libraries First Edition
Cable Tray Systems and Cable Ladder Systems for Cable
Management First Edition
"Radiation in Nuclear Facilities - Centralized Systems for Continuous
Monitoring of Radiation and/or Levels of Radioactivity - Part 2:
Requirements for Discharge
Electroacoustics - Sound Level Meters - Part 1: Specifications First
Edition
Medical Electrical Equipment - Dosimeters with Ionization Chambers
61822
61937-7
61967-4
62011-1
62024-1
62025-1
62044-1
TR 62048
62056-21
62246-1
62271-100
62271-102
PASS 62272-1
TR 62291
PAS 62323
GUIDE 50
7816-3
8326
8327-1
and/or Semi-Conductor Detectors as Used in X-ray Diagnostic
Imaging First Edition; Amendment 1 06-2002
Electrical Installation for Lighting and Beaconing of Aerodromes Constant Current Regulator
Digital Audio - Interface for Non-Linear PCM Encoded Audio
Bitstreams Applying IEC 60958 - Part 7: Non-Linear PCM
Bitstreams According to the ATRAC and ATRAC 2/3 Formats First
Edition
"Integrated Circuits - Measurement of Electromagnetic Emissions
"Insulating Materials - Industrial
High Frequency Inductive Componenets - Electrical Characteristics
and Measuring Methods - Part 1: Nanohenry Range Chip Inductor
First Edition
"High Frequency Inductive Components - Non-Electrical
Characteristics and Measuring Methods - Part 1: Fixed
Cores Made of Soft Magnetic Materials - Measuring Methods - Part
1: Generic Specification First Edition
Optical Fibres - Reliability - Power Law Theory First Edition
"Electricity Metering - Data Exchange for Meter Reading
Reed Contract Units - Part 1: Generic Specification First Edition
High-Voltage Switchgear and Controlgear - Part 100: High-Voltage
Alternating-Current Circuit-Breakers First Edition; Replaces IEC
60056 Edition 4.0:1987; Amendment 1: 05-2002
"High-Voltage Switchgear and Controlgear - Part 102: High-Voltage
Alternating Current Disconnectors and Earthing Switches First
Edition; Cancels and Replaces IEC 60129-1984 and Replaces IEC
61128
Digital Radio Mondiale (DRM) - System Specification for Digital
Transmissions in the Broadcasting Bands Below 30 MHz Edition 1.0
Multimedia Data Storage - Application Program Interface for UDF
Based File Systems First Edition
Dimensions of Half Pot Cores Made of Magnetic Oxides for
Inductive proximity Switches Edition 1.0
Safety Aspects - Guidelines for Child Safety Second Edition
Information Technlogy - Identification Cards - Integrated Circuit(s)
Cards with Contacts - Part 3: Electronic Signals and Transmission
Protocols Second Edition; Amendment 1: 6/01/2002
Information Technology - Open Systems Interconnection - Session
Service Definition Second Edition; Amendment 1: Efficiency
Enhancements: 10-01-1998; Amendment 2: Nested Connections
Functional Unit: 12-15-1998; Corrigendum 1 5/15/2002
Information Technology - Open Systems Interconnection Connection-Oriented Session Protocol: Protocol Specification Second
Edition; Amendment 1: Efficiency Enhancements: 10-01-1998;
Amendment 2: Nested Connections Functional Unit: 12-15-1998;
Corrigendum
8348
8824-1
8824-3
8825-1
8825-2
9594-2
9594-10
9797-2
10164-2
10164-9
10164-10
10164-12
10164-13
Information Technology - Open Systems Interconnection - Network
Service Definition Third Edition; Amendment 1: 12/15/1998;
Amendment 2: 5/01/2002
Information Technology - Abstract Syntax Notation One (ASN.1):
Specification of Basic Notation Second Edition; Technical
Corrigendum 1: 12/15/1999; Amendment 2: 10/15/2000; Amendment
1: 12/01/2000; Corrigendum 2: 02/01/2002; Corrigendum 3:
5/01/2002; Corri
Information Technology - Abstract Syntax Notation One (ASN.1):
Constraint Specification Second Edition; Technical Corrigendum 1:
12/15/2001; Corrigendum 2: 5/01/2002
"Information Technology - ASN.1 Encoding Rules: Specification of
Basic Encoding Rules (BER)
Information Technology - ASN.1 Encoding Rules: Specification of
Packed Encoding Rules (PER) Second Edition; Technical
Corrigendum 1: 12/15/1999; Amendment 1: 12/01/2000;
Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - The
Directory: Models Third Edition; Corrigendum 1: 02/01/2002;
Corrigendum 2: 5/01/2002
Information Technology - Open Systems Interconnection - The
Directory - Part 10: Use of Systems Management for Administration
of the Directory First Edition; Corrigendum 1 5/1/2002
Information Technology - Security Techniques - Message
Authentication Codes (MACs) - Part 2: Mechanisms Using a
Dedicated Hash-Function First Edition
Information Technology - Open Systems Interconnection - Systems
Management: State Management Function Amendment 2:
Amendment to Support Lifecycle State First Edition; CCITT
RECMN X.731; AS/NZS 4152.2: 1994; CAN/CSA-ISO/IEC-101642-95; Amendment 1-1996; Cor
Information Technology - Open Systems Interconnection - Systems
Management: Objects and Attributes for Access Control First
Edition; Technical Corrigendum 1: 12-15-1996; Technical
Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 04/15/2002
Information Technology - Open Systems Interconnection - Systems
Management: Usage Metering Function for Accounting Purposes
First Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1:
11-01-1999; Technical Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - Systems
Management: Test Management Function First Edition; Technical
Corrigendum 1: 10-15-1998; Technical Corrigendum 2: 11-01-1999;
Technical Corrigendum 3: 4/15/2002
Information Technology - Open Systems Interconnection - Systems
Management: Summarization Function First Edition; Amendment 1
04-01-97; Corrigendum 1: 11-15-99; Corrigendum 2: 04-15-2002
10164-14
10165-5
TR 11802-1
TR 11802-2
12207
14476-1
14496-2
14496-5
15457-3
15938-3
16262
16448
16449
21991
61788-6
61797-1
61800-1
Information Technology - Open Systems Interconnection - Systems
Management: Confidence and Diagnostic Test Categories First
Edition; Technical Corrigendum 1:12/15/1999; Technical
Corrigendum 2: 4/15/2002; Technical Corrigendum 3: 4/15/2002
Information Technology - Open Systems Interconnection - Structure
of Management Information: Generic Management Information First
Edition; Corrigendum 1: 12/15/1998; Corrigendum 2: 4/15/2002
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Technical Reports and Guidelines - Part 1: The Structure and
Coding of Logical Link Control Addresses in Local Area Networks
Third
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Part 2: Standard Group MAC Addresses Fifth Edition
Information Technology - Software Life Cycle Processes First
Edition; Amendment 1: 5/01/2002
Information Technology - Enhanced Communications Transport
Protocol: Specification of Simplex Multicast Transport First Edition
Information Technology - Coding of Audio-Visual Objects - Part 2:
Visual Second Edition; Amendment 1:02/01/2002; Amendment 2:
02/01/2002
Information Technology - Coding of Audio-Visual Objects - Part 5:
Reference Software Second Edition
Identification Cards - Thin Flexible Cards - Part 3: Test Methods
First Edition
Information Technology - Multimedia Content Description Interface Part 3: Visual First Edition
Information Technology - ECMAScript Language Specification
Second Edition
Information Technology - 120 mm DVD - Read-Only Disk Second
Edition
Information Technology - 80 mm DVD - Read-Only Disk Second
Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Corporate Telecommunication
Networks - Signalling Interworking Between QSIG and H.323 - Call
Completion Supplementary Services First Edition
Superconductivity - Part 6: Mechanical Properties Measurement Room Temperature Tensile Test of Cu/Nb-Ti Composite
Superconductors First Edition
Transformers and Inductors for Use in Telecommunication and
Electronic Equipment - Main Dimensions of Coil Formers - Part 1:
Coil Formers for Laminated Cores First Edition
Adjustable Speed Electrical Power Drive Systems - Part 1: General
Requirements - Rating Specifications for Low Voltage Adjustable
61800-2
61800-3
61803
TR 61807
61808
61809
61810-1
61810-5
61810-7
61811-1
61811-50
61811-51
61811-52
61811-53
61811-54
PAS 61811-55
Speed d.c. Power Drive Systems First Edition
Adjustable Speed Electrical Power Drive Systems - Part 2: General
Requirements - Rating Specifications for Low Voltage Adjustable
Frequency a.c. Power Drive Systems First Edition
Adjustable Speed Electrical Power Drive Systems - Part 3: EMC
Product Standard Including Specific Test Methods First Edition
Determination of Power Losses in High-Voltage Direct Current
(HVDC) Converter Stations First Edition; Corrigendum 10-1999
Magnetic Properties of Magnetically Hard Materials at Elevated
Temperatures - Methods of Measurement First Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Sealed Nickel-Metal Hydride Button
Rechargeable Single Cells First Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Safety Requirements for Portable Sealed Alkaline
Secondary Cells and Batteries First Edition
Electromechanical Non-Specified Time All-or-Nothing Relays - Part
1: General Requirements First Edition
Electromechanical Non-Specified Time All-or-Nothing Relays - Part
5: Insulation Coordination First Edition
Electromechanical All-or-Nothing Relays - Part 7: Test and
Measurement Procedures First Edition
Electromechanical Non-Specified Time All-Or-Nothing Relays of
Assesed Quality - Part 1: Generic Specification First Edition; IECQ
QC 160000
Electromechanical All-Or-Nothing Relays - Part 50: Sectional
Specification - Electromechanical All-Or-Nothing Telecom Relays of
Assessed Quality First Edition; IECQ QC 160500
Electromechanical All-Or-Nothing Relays - Part 51: Blank Detail
Specification - Electromechanical All-or-Nothing Telecom Relays of
Assessed Quality - Non-Standardized Types and Construction First
Edition; QC 160501
Electromechanical All-Or-Nothing Relays - Part 52: Blank Detail
Specification - Electromechanical All-or-Nothing Telecom Relays of
Assessed Quality - Two Change-Over Contacts, 20 mm x 10 mm
Base First Edition; QC 160502
Electromechanical All-or-Nothing Relays - Part 53: Blank Detail
Specification - Electromechanical All-or-Nothing Telecom Relays of
Assessed Quality - Two Change-Over Contacts, 14 mm x 9 mm Base
First Edition; QC 160503
Electromechanical All-Or-Nothing Relays - Part 54: Blank Detail
Specification - Electromechanical All-or-Nothing Telecom Relays of
Assessed Quality - Two Change-Over Contacts, 15 mm x 7,5 mm
Base First Edition; QC 160504
Electromechanical All-Or-Nothing Relays - Part 55: Blank Detail
Specification - Electromechanical All-or-Nothing Telecom Relays of
61812-1
TS 61813
61817
61828
61829
61830
TR 61831
TR 61832
61834-1
61834-2
61834-3
61835
TR 61836
61837-2
61837-3
61834-4
61834-5
Assessed Quality - Two Change-Over Contacts, 11 mm x 7,5 mm
(Max.) Base Edition 1.0; QC 160505
Specified Time Relays for Industrial Use - Part 1: Requirements and
Tests First Edition
Live Working - Care, Maintenance and In-Service Testing of Aerial
Devices with Insulating Booms First Edition
Household Portable Appliances for Cooking, Grilling and Similar
Use - Methods for Measuring Performance First Edition
Ultrasonics - Focusing Transducers - Definitions and Measurement
Methods for the Transmitted Fields First Edition
Crystalline Silicon Photovoltaic (PV) Array - On-Site Measurement
of I-V Characteristics First Edition
Microwave Ferrite Components - Measuring Methods for Major
Properties First Edition
On-Line Analyser Systems - Guide to Design and Installation First
Edition
Analyser Systems - Guide to Technical Enquiry and Bid Evaluation
First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60, and 1250-50 Systems) - Part 1: General Specifications
Edition 1.1; Edition 1:1998 Consolidated with Amendment 1:2001
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 2: SD Format for 525-60 and
625-50 Systems First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 3: HD Format for 1125-60 and
1250-50 Systems First Edition
Helical-Scan Digital Component Video Cassette Recording System
Using 12,65 mm (0,5 in) Magnetic Tape - Format D-5 First Edition
Solar Photovoltaic Energy Systems - Terms and Symbols First
Edition
Surface Mounted Piezoelectric Devices for Frequency Control and
Selection - Standard Outlines and Terminal Lead Connections - Part
2: Ceramic Enclosures First Edition
Surface Mounted Piezoelectric Devices for Frequency Control and
Selection - Standard Outlines and Terminal Lead Connections - Part
3: Metal Enclosures First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 4: Pack Header Table and
Contents First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
61834-6
61834-7
61834-8
61834-9
61834-10
61837-1
TR 61838
61839
61843
61846
61847
61851-1
61851-21
61851-22
61852
61854
61857-1
61857-21
1125-60 and 1250-50 Systems) - Part 5: The Character Information
System First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 6: SDL Format First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 7: Format EDTV2 First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) Part 8: PALplus Format for the 62550 System First Edition
Recording - Helical-Scan Digital Video Cassette Recording System
Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60, 1250-50 Systems) - Part 9: DVB Format First Edition
Recording - Helican-Scan Digital Video Cassette Recording System
Using 6,35mm Magnetic Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 10: DTV Format First Edition
Surface Mounted Piezoelectric Devices for Frequency Control and
Selection - Standard Outlines and Terminal Lead Connections - Part
1: Plastic Moulded Enclosure Outlines First Edition; Shall Be Read in
Conjunction with IEC 61240
Nuclear Power Plants - Instrumentation and Control Functions
Important for Safety - Use of Probabilistic Safety Assessment for the
Classification First Edition
Nuclear Power Plants - Design of Control Rooms - Functional
Analysis and Assignment First Edition
Measuring Method for the Level of Intermodulation Products
Generated in a Gyromagnetic Device First Edition
Ultrasonics - Pressure Pulse Lithotripters - Characteristics of Fields
First Edition
Ultrasonics - Surgical Systems - Measurement and Declaration of the
Basic Output Characteristics First Edition
Electric Vehicle Conductive Charging System - Part 1: General
Requirements First Edition
Electric Vehicle Conductive Charging System - Part 21: Electric
Vehicle Requirements for Conductive Connection to an A.C./D.C.
Supply First Edition
Electric Vehicle Conductive Charging System - Part 22: AC Electric
Vehicle Charging Station First Edition
Medical Electrical Equipment - Digital Imaging and Communications
in Medicine (DICOM) - Radiotherapy Objects First Edition
Overhead Lines - Requirements and Tests for Spacers First Edition
Electrical Insulation Systems - Procedures for Thermal Evaluation Part 1: General Requirements - Low-Voltage First Edition
Electrical Insulation Systems - Procedures for Thermal Evaluation -
61858
TR 61859
61860
61865
61866
61868
TS 61873
61880
61881
61882
61883-1
61883-2
61883-3
61883-4
61883-5
PAS 61883-6
PAS 61883-7
61892-3
61892-5
61892-6
61892-7
Part 21: Specific Requirements for General-Purpose Model - WireWound Applications First Edition
Electrical Insulation Systems - Thermal Evaluation of Modifications
to an Established Wire-Wound EIS First Edition
Guidelines for Radiotherapy Treatment Rooms Design First Edition
Dimensions of Low-Profile Cores Made of Magnetic Oxides First
Edition
Overhead Lines - Calculation of the Electrical Component of
Distance between Live Parts and Obstacles - Method of Calculation
First Edition
Audiovisual Systems - Interactive Text Transmission System (ITTS)
First Edition
Mineral Insulating Oils - Determination of Kinematic Viscosity at
Very Low Temperatures First Edition
State of the Art for Symmetrical Pair/Quad Cables with Transmission
Characteristics Beyond Category 5 First Edition
Video Systems (525/60) - Video and Accompanied Data Using the
Vertical Blanking Interval - Analogue Interface First Edition
Railway Applications - Rolling Stock Equipment - Capacitors for
Power Electronics First Edition
Hazard and Operability Studies (HAZOP Studies) - Application
Guide First Edition
Consumer Audio/Video Equipment - Digital Interface - Part 1:
General First Edition
Consumer Audio/Video Equipment - Digital Interface - Part 2: SDDVCR Data Transmission First Edition
Consumer Audio/Video Equipment - Digital Interface - Part 3: HDDVCR Data Transmission First Edition
Consumer Audio/Video Equipment - Digital Interface - Part 4:
MPEG2-TS Data Transmission First Edition
Consumer Audio/Video Equipment - Digital Interface - Part 5: SDLDVCR Data Transmission First Edition
Consumer Audio/Video Equipment - Digital Interface - Part 6: Audio
and Music Data Transmission Protocol Edition 1.0; Publicly
Available Specification
Consumer Audio/Video Equipment - Digital Interface - Part 7:
Transmission of Rec. ITU-R BO. 1294 System B Transport 1.0
Edition 1.0
Mobile and Fixed Offshore Units - Electrical Installations - Part 3:
Equipment First Edition
Mobile and Fixed Offshore Units - Electrical Installations - Part 5:
Mobile Units First Edition
Mobile and Fixed Offshore Units - Electrical Installations - Part 6:
Installation First Edition
Mobile and Fixed Offshore Units - Electrical Installations - Part 7:
Hazardous Areas First Edition
TS 61895
61897
TR 61902
61904
61909
TR 61911
TR 61916
TR 61917
61920
TR 61923
61926-1
TR 61926-1-1
TR 61930
TR 61931
61935-1
61937
61938
61939
TR 61940
TS 61956
61958
61960-1
Ultrasonics - Pulsed Doppler Diagnostic Systems - Test Procedures to
Determine Performance First Edition
Overhead Lines - Requirements and Tests for Stockbridge Type
Aeolian Vibration Dampers First Edition
Household Microwave Ovens - Visual Clarity of See-Through Oven
Doors First Edition
Video Recording - Helical-Scan Digital Component Video Cassette
Recording Format Using 12,65 mm Magnetic Tape and Incorporating
Data Compression (Format Digital-L) First Edition
Audio Recording - Minidisc System First Edition
Live Working - Installation of Distribution Line Conductors Stringing Equipment and Accessory Items First Edition
Electrical Accessories - Harmonization of General Rules First Edition
Cables, Cable Assemblies and Connectors - Introduction to
Electromagnetic (EMC) Screening Measurements First Edition
Infrared Transmission Systems - Free Air Applications First Edition
Household Electrical Appliances - Method of Measuring
Performance - Assessment of Repeatability and Reproducibility First
Edition
Design Automation - Part 1: Standard Test Language for all Systems
- Common Abbreviated Test Language for All Systems (C/ATLAS)
First Edition
Design Automation - Part 1-1: Harmonization of ATLAS Test
Languages First Edition
Fibre Optic Graphical Symbology First Edition
Fibre Optic - Terminology First Edition
Generic Cabling Systems - Specification for the Testing of Balanced
Communication Cabling in Accordance with ISO/IEC 11801 - Part 1:
Installed Cabling First Edition
Digital Audio - Interface for Non-Linear PCM Encoded Audio
Bitstreams Applying IEC 60958 First Edition
Audio, Video and Audiovisual Systems - Interconnections and
Matching Values - Preferred Matching Values of Analogue Signals
First Edition; Cancels and Replaces IEC 1938: 1996 and IEC 574-4:
1982
Saw Tables for Use as Saw Benches - Tables for Hand-Held Circular
Saws with a Maximum Saw-Blade Diameter of 315 mm - Safety
Requirements First Edition
Nuclear Instrumentation - A Review of the Application of IEC 60880
(1986) First Edition
Methods of Test for the Evaluation of Water Treeing in Insulating
Materials First Edition
High-Voltage Prefabricated Switchgear and Controlgear Assemblies Voltage Presence Indicating Systems First Edition
Secondary Lithium Cells and Batteries for Portable Applications Part 1: Secondary Lithium Cells First Edition
61964
61965
61966-2-1
61966-3
61966-4
61966-5
61966-7-1
61966-8
61966-9
61969-1
61969-2
61969-2-1
61969-2-2
61976
61969-3
61978-1
61982-3
61984
61989 AMD 1
Integrated Circuits - Memory Devices Pin Configurations First
Edition
Mechanical Safety of Cathode Ray Tubes First Edition
Multimedia Systems and Equipment - Colour Measurement and
Management - Part 2-1: Colour Management - Default RGB Colour
Space - sRGB First Edition
Multimedia Systems and Equipment - Colour Measurement and
Management - Part 3: Equipment Using Cathode Ray Tubes First
Edition
Multimedia Systems and Equipment - Colour Measurement and
Management - Part 4: Equipment Using Liquid Crystal Display
Panels First Edition
Multimedia Systems and Equipment - Colour Measurement and
Management - Part 5: Equipment Using Plasma Display Panels First
Edition
Multimedia Sytems and Equipment - Colour Measurement and
Management - Part 7-1: Colour Printers - Reflective Prints - RGB
Inputs First Edition
Multimedia Systems and Equipment - Colour Measurement and
Management - Part 8: Multimedia Colour Scanners First Edition
Multimedia Systems and Equipment - Colour Measurement and
Management - Part 9: Digital Cameras First Edition
Mechanical Structures for Electronic Equipment - Outdoor
Enclosures - Part 1: Design Guidelines First Edition
Mechanical Structures for Electronic Equipment - Outdoor
Enclosures - Part 2: Sectional Specification - Coordination
Dimensions for Cases and Cabinets First Edition
Mechanical Structures for Electronic Equipment - Outdoor
Enclosures - Part 2-1: Detail Specification - Dimensions for Cabinets
First Edition
Mechanical Structures for Electronic Equipment - Outdoor
Enclosures - Part 2-2: Detail Specification - Dimensions for Cases
First Edition
Nuclear Instrumentation - Spectrometry - Characterization of the
Spectrum Background in HPGe Gamma-Ray Spectrometry First
Edition
Mechanical Structures for Electronic Equipment - Outdoor
Enclosures - Part 3: Sectional Specification - Climatic, Mechanical
Tests and Safety Aspects for Cabinets and Cases First Edition
Fibre Optic Passive Dispersion Compensators - Part 1: Generic
Specification IECQ QC 940000; First Edition
Secondary Batteries for the Propulsion of Electric Road Vehicles Part 3: Performance and Life Testing (Traffic Compatible, Urban Use
Vehicles First Edition
Connectors - Safety Requirements and Tests First Edition
Programming Languages - COBOL Amendment 1: Intrinsic Function
61989 AMD 2
61991
61992-1
61992-2
61992-3
61993-1
TS 61994-2
TS 61994-4-1
61996
TR 61998
62005-1
62005-2
62005-3
62005-4
62007-2
62013-1
Module 1992
Programming Languages - COBOL Amendment 2: Correction and
Clarification Amendment for COBOL 1994
Railways Applications - Rolling Stock - Protective Provisions
Against Electrical Hazards First Edition
Railway Applications - Fixed Installations - DC Switchgear - Part 1:
General First Edition
Railway Applications - Fixed Installations - DC Switchgear - Part 2:
Circuit-Breakers First Edition
Railway Applications - Fixed Installations - DC Switchgear - Part 3:
Indoor Disconnectors and Switch Disconnectors First Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - Part 1: Shipborne Automatic Transponder System
Installation Using VHF Digital Selective Calling (DSC) Techniques Operational and Performance Requirements, Methods of Testing and
Required
Piezoelectric and Dielectric Devices for Frequency Control and
Selection - Glossary - Part 2: Piezoelectric and Dielectric Filters First
Edition
Piezoelectric and Dielectric Devices for Frequency Control and
Selection - Glossary Part 4-1: Piezoelectric Materials - Synthetic
Quartz Crystal First Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - Shipborne Voyage Data Recorder (VDR) - Performance
Requirements - Methods of Testing and Required Test Results First
Edition
Model and Framework for Standardization in Multimedia Equipment
and Systems First Edition
Reliability of Fibre Optic Interconnecting Devices and Passive
Components - Part 1: Introductory Guide and Definitions First
Edition
Reliability of Fibre Optic Interconnecting Devices and Passive
Components - Part 2: Quantitative Assessment of Reliability Based
on Accelerated Ageing Tests - Temperature and Humidity; Steady
State First Edition
Reliability of Fibre Optic Interconnecting Devices and Passive
Components - Part 3: Relevant Tests for Evaluating Failure Modes
and Failure Mechanisms for Passive Components First Edition
Reliability of Fibre Optic Interconnecting Devices and Passive
Optical Components - Part 4: Product Screening First Edition
Semiconductor Optoelectronic Devices for Fibre Optic System
Applications - Part 2: Measuring Methods Edition 1.1; Edition 1:
1997 Consolidated with Amendment 1: 1998
Caplights for Use in Mines Susceptible to Firedamp - Part 1: General
Requirements - Construction and Testing in Relation to the Risk of
Explosion First Edition
62013-2
62014-1
62007-1
TR 62017-1
TR 62017-2
62019
62020
62023
62026-1
62026-2
62026-3
62026-5
62027
TS 62033
62035
62037
62040-2
62040-3
62044-3
TR 62051
62053-31
Caplights for Use in Mines Susceptible to Firedamp - Part 2:
Performance and Other Safety-Related Matters First Edition
Electronic Design Automation Libraries - Part 1: Input/Output Buffer
Information Specifications (IBIS Version 3.2) First Edition
Semiconductor Optoelectronic Devices for Fibre Optic System
Applications - Part 1: Essential Ratings and Characteristics Edition
1.1; Edition 1:1997 Consolidated with Amendment 1:1998
Documentation on Design Automation Subjects - Part 1: EDA
Industry Standards Roadmap First Edition
Documentation on Design Automation Subjects - Part 2: EIAJ-EDA
Technology Roadmap Toward 2002 First Edition
Electrical Accessories - Circuit-Breakers and Similar Equipment for
Household Use - Auxiliary Contact Units First Edition
Electrical Accessories - Residual Current Monitors for Household
and Similar Uses (RCMs) First Edition
Structuring of Technical Information and Documentation First
Edition
Low-Voltage Switchgear and Controlgear - Controller-Device
Interfaces (CDIs) - Part 1: General Rules First Edition
Low-Voltage Switchgear and Controlgear - Controller-Device
Interfaces (CDIs) - Part 2: Actuator Sensor Interface (AS-i) First
Edition
Low-Voltage Switchgear and Controlgear - Controller-Device
Interface (CDIs) - Part 3: DeviceNet First Edition
Low-Voltage Switchgear and Controlgear - Controller-Device
Interfaces (CDIs) - Part 5: Smart Distributed System (SDS) First
Edition
Preparation of Parts Lists First Edition
Attenuation Uniformity in Optical Fibres First Edition
Discharge Lamps (Excluding Fluorescent Lamps) - Safety
Specifications First Edition; Replaces and Combines the Safety
Requirements Previously Contained in IEC 60188, IEC 60192, IEC
60662 and IEC 61167
RF Connectors, Connector Cable Assemblies and Cables Intermodulation Level Measurement First Edition
Uninterruptible Power Systems (UPS) - Part 2: Electromagnetic
Compatibility (EMC) Requirements First Edition
Uninterruptible Power Systems (UPS) - Part 3: Method of Specifying
the Performance and Test Requirements First Edition; Cancels and
Replaces IEC 60146-4: 1986 and IEC 60146-5: 1988
Cores Made of Soft Magnetic Materials - Measuring Methods - Part
3: Magnetic Properties at High Excitation Level First Edition
Electricity Metering - Glossary of Terms First Edition
Electricity Metering Equipment (a.c.) - Particular Requirements - Part
31: Pulse Output Devices for Electromechanical and Electronic
Meters (Two Wires Only) First Edition
62053-61
62056-31
TR 62056-41
TR 62056-51
TR 62063
TR 62068-2
TR 62056-52
TR 62064
62067
62070
62071
62077
62079
62080
TS 62081
62083
PAS 62084
PAS 62085
62086-1
62086-2
Electricity Metering Equipment (a.c.) - Particular Requirements - Part
61: Power Consumption and Voltage Requirements First Edition
Electricity metering - Data Exchange for Meter Reading, Tariff and
Load Control Part 31: Use of Local Area Networks on Twisted Pair
with Carrier Signalling First Edition
Electricity Metering - Data Exchange for Meter Reading, Tariff and
Load Control - Part 41: Data Exchange Using Wide Area Networks:
Public Switched Telephone Network (PSTN) with LINK+ Protocol
First Edition
Electricity Metering - Data Exchange for Meter Reading, Tariff and
Load Control - Part 51: Application Layer Protocols First Edition
High-Voltage Switchgear and Controlgear - The Use of Electronic
and Associated Technologies in Auxiliary Equipment of Switchgear
and Controlgear First Edition
Electrical Insulation Systems (EIS) - Electrical Stresses Produced by
Repetitive Impulses - Part 2: State of the Art First Edition
Electrical Metering - Data Exchange for Meter Reading, Tariff and
Load Control - Part 52: Communication Protocols Management
Distribution Line Message Specification (DLMS) Server First Edition
Radio-Frequency Cables - Relationship between Surface Transfer
Impedance and Screening Attenuation (A Background to the
Recommended Limits Contained in IEC 61196-1, Clause 14) First
Edition
Power Cables with Extruded Insulation and Their Accessories for
Rated Voltages Above 150 kV (Um = 170 kV) up to 500 kV (Um =
550 kV) - Test Methods and Requirements First Edition
Broadcast Digital Video Tape Recorders - Identification Method for
Recording and/or Reproduction Error Status First Edition
Helical-Scan Compressed Digitsl Video Cassette Recording System
Using 6,35 mm Magnetic Tape - Format D-7 First Edition
Fibre Optic Circulators - Generic Specification First Edition; IECQ
QC 920000
Preparation of Instructions - Structuring, Content and Presentation
First Edition
Sound Signalling Devices for Household and Similar Purposes First
Edition
Arc Welding Equipment - Installation and Use First Edition
Medical Electrical Equipment - Requirements for the Safety of
Radiotherapy Treatment Planning Systems
Implementation of Flip Chip and Chip Scale Technology Edition 1.0
Implementation of Ball Grid Array and Other High Density
Technology Edition 1.0
Electrical Apparatus for Explosive Gas Atmospheres - Electrical
Resistance Trace Heating - Part 1: General and Testing Requirements
First Edition
Electrical Apparatus for Explosive Gas Atmospheres - Electrical
62088
62089
62092
TS 62098
62099
TR 62102
62104
62105
62106
62107
PAS 62111
TR 62112
62114
62117
62118
PAS 62119
62121
PAS 62123
62151
Resistance Trace Heating - Part 2: Application Guide for Design,
Installation and Maintenance First Edition
Nuclear Instrumentation - Photodiodes for Scintillation Detectors Test Procedures First Edition
Nuclear Instrumentation - Calibration and Usage of Alpha/Beta Gas
Proportional Counters First Edition
Ultrasonics - Hydrophones - Characteristics and Calibration in the
Frequency Range from MHz to 40 MHz First Edition
Evaluation Methods for Microprocessor-Based Instruments First
Edition
Fibre Optic Wavelength Switches - Generic Specification First
Edition; IECQ QC 950000
Electrical Safety - Classification of Interfaces for Equipment to Be
Connected to Information and Communications Technology
Networks First Edition
Characteristics of DAB (Digital Audio Broadcast) Receivers First
Edition
Digital Audio Broadcast System - Specification of the Receiver Data
Interface (RDI) First Edition
Specification of the Radio Data System (RDS) for VHF/FM Sound
Broadcasting in the Frequency Range from 87,5 to 108,0 MHz First
Edition
Super Video Compact Disc - Disc-Interchange System-Specification
First Edition
Specifications For The Use Of Renewable Energies In Rural
Decentralised Electification Edition 1.0
Safety of Hand-Held Motor-Operated Electric Tools - Particular
Requirements for Drills - Test Procedure Concerning Dynamic
Forces at Sudden Stalling First Edition
Electrical Insulation Systems (EIS) - Thermal Classification First
Edition
Nuclear Reactor Instrumentation - Pressurized Light Water Reactors
(PWR) - Monitoring Adequate Cooling within the Core During Cold
Shutdown First Edition
Nuclear Reactor Instrumentation - Pressurized Water Reactor (PWR)
of VVER Design - Monitoring Adequate Cooling within the Core
During Shutdown First Edition
Generic Requirements for Implementation of Product Manufacturing
Description Data and Transfer Methodology Edition 1.0
Methods of Measurement for Minidisc Recorders/Players First
Edition
Performance Guide Manual for Single- and Double-Sided Flexible
Printed Wiring Boards Editiom 1.0
Safety of Equipment Electrically Connected to a Telecommunication
Network First Edition; Corrigendum: 2000; Corrigendum 2: June
2001
62156
TR 62157
PAS 62158
PAS 62159
PAS 62160
PAS 62161
PAS 62162
PAS 62163
PAS 62164
PAS 62165
PAS 62166
PAS 62167
PAS 62168
PAS 62169
PAS 62170
PAS 62171
PAS 62172
PAS 62173
PAS 62174
PAS 62175
PAS 62177
PAS 62178
PAS 62179
PAS 62180
PAS 62181
PAS 62182
PAS 62183
PAS 62184
PAS 62185
PAS 62186
Digital Video Recording with Video Compression 12,65 mm Type
D-9 Component Format 525/60 and 625/50 (Digital S) First Edition
Cylindrical Machined Carbon Electrodes - Nominal Dimensions First
Edition
Printed Board Manufacturers' Qualification Profile (MQP) Edition
1.0
Electronic Assembly Manufacturers' Qualification Profile (AQP)
Edition 1.0
Laminator Qualification Profile Edition 1.0
Steady State Temperature Humidity Bias Life Test Edition 1.0
Field-Induced Charged-Device Model Test Method for Electrostatic
Discharge Withstand Thresholds of Microelectronic Components
Edition 1.0
External Visual Test Method Edition 1.0
Guidelines for GaAs MMIC and FET Life Testing Edition 1.0
Guidelines for the Measurement of Thermal Resistance of GaAs
FETs Edition 1.0
Guidelines for User Notification of Product/Process Changes by
Semiconductor Suppliers Edition 1.0
Product Discontinuance Edition 1.0
Symbol and Labels for Moisture-Sensitive Devices Edition 1.0
Standard for Handling, Packing, Shipping and Use of
Moisture/Reflow Sensitive Surface Mount Devices Edition 1.0
Bond Wire Modeling Standard Edition 1.0
Guidelines for Particle Impact Noise Detection (PIND) Testing,
Operator Training and Certification Edition 1.0
Accelerated Moisture Resistance - Unbiased Autoclave Edition 1.0
Solderability Test Method Edition 1.0
Resistance to Soldering Temperature for Through-Hole Mounted
Devices Edition 1.0
Marking Permanency Test Method Edition 1.0
Highly-Accelerated Temperature and Humidity Stress Test (HAST)
Edition 1.0
Temperature Cycling Edition 1.0
Electrostatic Discharge (ESD) Sensitivity Testing Human Body
Model (HBM) Edition 1.0
Electrostatic Discharge (ESD) Sensitivity Testing Machine Model
(MM) Edition 1.0
IC Latch-Up Test Edition 1.0
Preconditioning of Nonhermetic Surface Mount Devices Prior to
Reliability Testing Edition 1.0
Salt Atmosphere Edition 1.0
Lead Integrity Test Method Edition 1.0
Thermal Shock Test Method Edition 1.0
Mechanical Shock Test Method Edition 1.0
PAS 62187
PAS 62189
PAS 62190
PAS 62191
TR 62195
62198
PAS 62201
PAS 62202
PAS 62203
PAS 62204
PAS 62205
PAS 62206
PAS 62207
PAS 62213
PAS 62214
TR 62221
PAS 62239
PAS 62240
PAS 62249
PAS 62250
PAS 62255-1
PAS 62260
PAS 62261
62271-100
PAS 62276
PAS 62277
Variable Frequency Vibration Test Method Edition 1.0
Bias Life Edition 1.0
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid
State Surface Mount Devices Edition 1.0
Acoustic Microscopy for Nonhermetic Encapsulated Electronic
Components Edition 1.0
Power System Control and Associated Communications Deregulated Energy Market Communications First Edition
Project Risk Management - Application Guidelines First Edition
A Procedure for Executing SWEAT Edition 1.0
Failure Mechanisms and Models for Silicon Semiconductor Devices
Edition 1.0
Guide for Standard Probe Pad Sizes and Layouts for Water-Level
Electrical Testing Edition 1.0
Standard Method for Measuring and Using the Temperature
Coefficient of Resistance to Determine the Temperature of a
Metallization Line Edition 1.0
High Temperature Storage Life Edition 1.0
Power and Temperature Cycling Edition 1.0
Hermeticity Edition 1.0
Specification and Characterization Methods for Nonwoven ParaAramid Reinforcement Edition 1.0
Generic Performance Specification for Printed Boards Edition 1.0
Optical Fibres - Measurement Methods - Microbending Sensitivity
First Edition
Electronic Component Management Plans Edition 1.0
Use of Semiconductor Devices Outside Manufacturer's Specified
Temperature Ranges Edition 1.0
Qualification and Performance Specification for Flexible Printed
Boards Edition 1.0
Qualification and Performance Specification for Rigid Printed Boards
Edition 1.0
Pre-Standard; Multi-Pair Cables Used in High Bit Rate Digital
Access Telecommunication Networks - Part 1: Outdoor Cables
Edition 1.0
Pulse/Step Return Loss from Measurement in the Frequency Domain
Using the Inverse Discrete Fourier Transformation (IDFT) Edition
1.0
Television - Metadata Dictionary Structure Edition 1.0
High-Voltage Switchgear and Controlgear - Part 100: High-Voltage
Alternating-Current Circuit-Breakers First Edition; Replaces IEC
60056 Edition 4.0:1987
Single Crystal Wafers Applied for Surface Acoustic Wave Device Specification and Measuring Method Edition 1.0
Test-Fixture of Surface Mounting Quartz Crystal Units Edition 1.0
62326-1
62326-4
80416-1
81714-1
81714-3
62326-4-1
81714-2
82045-1
GUIDE 2
GUIDE 7
GUIDE 14
GUIDE 21
GUIDE 22
GUIDE 23
GUIDE 28
GUIDE 37
GUIDE 43-1
GUIDE 43-2
GUIDE 46
Printed Boards - Part 1: Generic Secification First Edition; IECQ QC
230000
Printed Boards - Part 4: Rigid Multilayer Printed Boards with
Interlayer Connections - Sectional Specification First Edition; IECQ
QC 230500
Basic Principles for Graphical Symbols for Use on Equipment - Part
1: Creation of Symbol Originals First Edition; Replaces IEC 60416
Ed. 1.0:1988
Design of Graphical Symbols for Use in the Technical
Documentation of Products - Part 1: Basic Rules First Edition;
Replaces ISO/IEC 11714-1: 1996
Design of Graphical Symbols for Use in the Technical
Documentation of Products - Part 3: Classification of Connect Nodes,
Networks and Their Encoding First Edition
Printed Boards - Part 4: Rigid Multilayer Printed Boards with
Interlayer Connections - Sectional Specification - Section 1:
Capability Detail Specification - Performance Levels A, B and C
First Edition; IECQ QC 230401
Design of Graphical Symbols for Use in the Technical
Documentation of Products - Part 2: Specification for Graphical
Symbols in a Computer Sensible Form, Including Graphical Symbols
for a Reference Library, and Requirements for Their Interchange First
Edit
Document Management - Part 1: Principles and Methods First
Edition
Standardization and Related Activities - General Vocabulary Seventh
Edition
Guidelines for Drafting of Standards Suitable for Use for Conformity
Assessment Second Edition; SAA/SNZ HB18.7: 1994
Product Information for Consumers
Adoption of International Standards as Regional or National
Standards Second Edition; Cancels and Replaces Guide 3: 1981
General Criteria for Supplier's Declaration of Conformity Second
Edition
Methods of Indicating Conformity with Standards for Third-Party
Certification Systems First Edition; SANZ/SAA HB18.23: 1991
General Rules for a Model Third-Party Certification System for
Products First Edition; SANZ/SAA HB18.28: 1991
Instructions for Use of Products of Consumer Interest Second Edition
Proficiency Testing by Interlaboratory Comparisions - Part 1:
Development and Operation of Laboratory Proficiency Testing
Schemes Second Edition
Proficiency Testing by Interlaboratory Comparisions - Part 2:
Selection and Use of Proficiency Testing Schemes by laboratory
Accreditation Bodies First Edition
Comparative Testing of Consumer Products and Related Services -
GUIDE 50
GUIDE 51
GUIDE 53
GUIDE 58
GUIDE 59
GUIDE 60
GUIDE 61
GUIDE 62
GUIDE 63
GUIDE 65
GUIDE 66
GUIDE 71
GUIDE 102
GUIDE 103
GUIDE 104
GUIDE 106
GUIDE 107
GUIDE 108
GUIDE 109
GUIDE 110
GUIDE 111
General Principles First Edition
Child Safety and Standards - General Guidelines First Edition
Safety Aspects - Guidelines for Their Inclusion in Standards Second
Edition
Approach to the Utilization of a Supplier's Quality System in Third
Party Product Certification First Edition; SANZ/SAA HB18.53: 1991
Calibration and Testing Laboratory Accreditation Systems - General
Requirements for Operation and Recognition First Edition; Replaces
IEC Guide 54: 1988 and IEc Guide 55: 1989
Code of Good Practice for Standardization First Edition
Code of Good Practice for Conformity Assessment First Edition;
Replaces IEC Guide 16: 1978
General Requirements for Assessment and Accreditation of
Certification/Registration Bodies First Edition; SAA/SNZ HB18.61:
1996
General Requirements for Bodies Operating Assessment and
Certification/Registration of Quality Systems First Edition;
SAA/SNZ HB18.62: 1996; Cancels and Replaces Guide 48; 1986
Guide to the Development and Inclusion of Safety Aspects in
International Standards for Medical Devices First Edition
General Requirements for Bodies Operating Product Certification
Systems First Edition; Cancels and Replaces ISO/IEC Guide 40:
1983
General Requirements for Bodies Operating Assessment and
Certification/Registration of Environmental Management Systems
(EMS) First Edition
Guidelines for Standards Developers to Address the Needs of Older
Persons and Persons with Disabilities First Edition
Electronic Components - Specification Structures for Quality
Assessment (Qualification Approval and Capability Approval) Fourth
Edition (IECQ GUIDE 102)
Guide on Dimensional Co-Ordination First Edition
Preparation of Safety Publications and the Use of Basic Safety
Publications and Group Safety Publications Third Edition
Guide for Specifying Environmental Conditions for Equipment
Performance Rating Second Edition
Electromagnetic Compatibility - Guide to the Drafting of
Electromagnetic Compatibility Publications Second Edition
Relationship Between Technical Committees with Horizontal
Functions and Product Committees and the Use of Basic Publications
First Edition
Environmental Aspects - Inclusion in Electrotechnical Product
Standards First Edition
Home Control Systems - Guidelines Relating to Safety First Edition
Electrical High-Voltage Equipment in High-Voltage Substations Common Clauses for Product Standards First Edition
GUIDE 112
MISC UNCERT
CISPR 10
CISPR 11
CISPR 12
CISPR 13
CISPR 14-2
CISPR 15
CISPR 16-1
CISPR 16-2
CISPR 16-3
CISPR 17
CISPR 18-1
CISPR 19
CISPR 18-2
CISPR 18-3
Guide on the Safety of Multimedia Equipment Second Edition
Guide to the Expression of Uncertainty in Measurement First Edition;
Corrected and Reprinted 1995
Organization, Rules and Procedures of the CISPR Fourth Edition;
Corrigendum: 01/1994; Amendment 1: 04/1995; Corrigendum:
12/1995; Amendment 2: 08/2001
Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment
- Electromagnetic Disturbance Characteristics - Limits and Methods
of Measurement Edition 3.1; Edition 3: 1997 Consolidated with
Amendment 1: 1999
Vehicles, Motorboats and Spark-Ignited Engine-Driven Devices Radio Disturbance Characteristics - Limits and Methods of
Measurement Fourth Edition
Sound and Television Broadcast Receivers and Associated
Equipment - Radio Disturbance Characteristics - Limits and Methods
of Measurement Fourth Edition
Electromagnetic Compatibility - Requirements for Household
Appliances, Electric Tools and Similar Apparatus - Part 2: Immunity
- Product Family Standard First Edition; Amendment 1 - 08/2001
Limits and Methods of Measurement of Radio Disturbance
Characteristics of Electrical Lighting and Similar Equipment Sixth
Edition; Amendment 1: 10/2001
Specification for Radio Disturbance and Immunity Measuring
Apparatus and Methods Part 1: Radio Disturbance and Immunity
Measuring Apparatus Second Edition
Specification for Radio Disturbance and Immunity Measuring
Apparatus and Methods - Part 2: Methods of Measurement of
Disturbances and Immunity Edition 1.1; Edition 1: 1996
Consolidated with Amendment 1:1999
Specification for Radio Disturbance and Immunity Measuring
Apparatus and Methods - Part 3: Reports and Recommendations of
CISPR First Edition
Methods of Measurement of the Suppression Characteristics of
Passive Radio Interference Filters and Suppression Components First
Edition
Radio Interference Characteristics of Overhead Power Lines and
High-Voltage Equipment Part 1: Description of Phenomena First
Edition
Guidance on the Use of the Substitution Method for Measurements of
Radiation from Microwave Ovens for Frequencies Above 1 GHz
First Edition; AS/NZS 4052: 1992
Radio Interference Characteristics of Overhead Power Lines and
High-Voltage Equipment Part 2: Methods of Measurement and
Procedure for Determining Limits First Edition; Amendment 1-1993;
Amendment 2-1996
Radio Interference Characteristics of Overhead Power Lines and
CISPR 20
CISPR 21
CISPR 22
CISPR 23
CISPR 24
CISPR 25
CISPR 30
CISPR 1000-6-3
CISPR TR 28
CISPR 20
61360-1
60050-121
60077-3
60079-7
60127-10
60191-6-2
High-Voltage Equipment Part 3: Code of Practice for Minimizing the
Generation of Radio Noise First Edition; Amendment 1-1996
Sound and Television Broadcast Receivers and Associated
Equipment - Immunity Characteristics - Limits and Methods of
Measurement Edition 4.1; Edition 4: 1998 Consolidated with
Amendment 1: 1999
Interference to Mobile Radiocommunications in the Presence of
Impulsive Noise; Methods of Judging Degradation and Measures to
Improve Performance Second Edition
Information Technology Equipment - Radio Disturbance
Characteristics - Limits and Methods of Measurement Third Edition;
Amendment 1-2000
Determination of Limits for Industrial, Scientific and Medical
Equipment First Edition
Information Technology Equipment - Immunity Characteristics Limits and Methods of Measurement First Edition; Amendment 1:072001
Limits and Methods of Measurement of Radio Disturbance
Characteristics for the Protection of Receivers Used on Board
Vehicles First Edition
Test Method on Electromagnetic Emissions from Electronic Ballasts
for Single-and-Double-Capped Fluorescent Lamps First Edition
Electromagnetic Compatability (EMC) - Part 6: Generic Standards Section 3: Emission Standard for Residential, Commercial and LightIndustrial Environments First Edition
Industrial, Scientific and Medical Equipment (ISM) - Guidelines for
Emission Levels within the Bands Designated by the ITU First
Edition
Sound and Television Broadcast Receivers and Associated
Equipment - Immunity Characteristics - Limits and Methods of
Measurement Fifth Edition
Standard Data Element Types with Associated Classification Scheme
for Electric Components - Part 1: Definitions - Principles and
Methods Second Edition
International Electrotechnical Vocabulary - Part 121:
Electromagnetism Second Edition; Amendment 1: 01/2002
Railway Applications - Electric Equipment for Rolling Stock - Part 3:
Electrotechnical Components - Rules for d.c. Circuit-Breakers First
Edition
Electrical Apparatus for Explosive Gas Atmospheres Part 7:
Increased Safety "E" Third Edition
Miniature Fuses - Part 10: User Guide for Miniature Fuses First
Edition
"Mechanical Standardization of Semiconductor Devices - Part 6-2:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Design Guide for 1
60204-31
60282-1
60300-3-12
60352-2
60359
60364-5-55
60974-5
61977
61631
61850-3
PAS 62292
60539-1
60848
PAS 61076-3110
61193-1
60793-2-20
60601-2-10
60603-7-1
60679-1
60702-1
60702-2
60730-2-2
"Safety of Machinery - Electrical Equipment of Machines - Part 31:
Particular Safety and EMC Requirements for Sewing Machines
High-Voltage Fuses - Part 1: Current-Limiting Fuses Fifth Edition
Dependability Management - Part 3-12: Application Guide Integrated Logistic Support First Edition
"Solderless Connections Part 2: Solderless Crimped Connections General Requirements
Electrical and Electronic Measurement Equipment -Expression of
Performance Third Edition
"Electrical Installations of Buildings - Part 5-55: Selection and
Erection of Electrical Equipment - Other Equipment First Edition;
Amendment 1:12-2001; Compiled and Replaces IEC 60364-5551(1994)
Arc Welding Equipment - Part 5: Wire Feeders First Edition
Fibre Optic Filters - Generic Specification First Edition
Test Method for the Mechanical Strength of Cores Made of Magnetic
Oxides First Edition
Communication Networks and Systems in Substations - Part 3:
General Requirements First Edition
Draft SMPTE Engineering Guideline SMPTE XXX - Declarative
Data Essence Edition 1.0
Directly Heated Negative Temperature Coefficient Thermistors - Part
1: Generic Specification First Edition; IECQ QC 430000
GRAFCET Specification Language for Sequential Function Charts
Second Edition
Connectors for Electronic Equipment - Part 3-110: Detail
Specification 8 Way Connectors for Frequencies Up to 600 MHz
Edition 1.0
Quality Assessment Systems - Part 1: Registration and Analysis of
Defects on Printed Board Assemblies First Edition
Optical Fibres - Part 2-20: Product Specifications - Sectional
Specification for Category A2 Multmode Fibres First Edition
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Nerve and Muscle Stimulators First Edition Amendment
1:09-2001; Corrigendum 02-2002
"Connectors for Electronic Equipment - Part 7-1: Detail Specification
for 8-Way
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 1:
Generic Specification Second Edition; QC 690000; Amendment 1:
01/2002
Mineral Insulated Cables and Their Terminations with a Rated
Voltage Not Exceeding 750 V Part 1: Cables Third Edition
Mineral Insulated Cables and Their Terminations with a Rated
Voltage Not Exceeding 750 V Part 2: Terminations Second Edition
Automatic Electrical Controls for Household and Similar Use - Part
2: Particular Requirements for Thermal Motor Protectors Second
60745-1
60761-1
60761-2
PAS 62297
PAS 62298
60761-3
60761-4
60761-5
61386-21
61386-22
61386-23
60793-1-20
60909-0
60947-1
61076-4-108
61076-4-111
61249-2-4
61249-2-18
Edition
Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General
Requirements Third Edition
Equipment for Continuous Monitoring of Radioactivity in Gaseous
Effluents - Part 1: General Requirements Second Edition
Equipment for Continuous Monitoring of Radioactivity in Gaseous
Effluents - Part 2: Specific Requirements for Radioactive Aerosol
Monitors Including Transuranic Aerosols Second Edition
Proposal for Introducing a Trigger Mechanism into TV
Transmissions Edition 1.0; EACEM TR-037-R01:2001
TeleWeb Application Profile 1 Reference Decoder Edition 1.0;
EACEM TR-045-R01:2001
Equipment for Continuous Monitoring of Radioactivity in Gaseous
Effluents - Part 3: Specific Requirements for Noble Gas Monitors
Second Edition
Equipment for Continuous Monitoring Radioactivity in Gaseous
Effluents - Part 4: Specific Requirements for Iodine Monitors Second
Edition
Equipment for Continuous Monitoring Radioactivity in Gaseous
Effluents - Part 5: Specific Requirements for Tritium Monitors
Second Edition
Conduit Systems for Cable Management - Part 21: Particular
Requirements - Ridgid Conduit Systems First Edition
Conduit Systems for Cable Management - Part 22: Particular
Requirements - Pliable Conduit Systems First Edition
Conduit Systems for Cable Management - Part 23: Particular
Requirements - Flexible Conduit Systems First Edition
"Optical Fibres - Part 1-20: Measurement Methods and Test
Procedures - Fibre Geometry First Edition; Together with the Other
Standards in the IEC 60793-1-2X Series
Short-Circuit Current Calculation in Three-Phase A.C. Systems - Part
0: Calculation of Currents First Edition; Corrigendum 1 02/2002
Low-Voltage Switchgear and Controlgear - Part 1: General Rules
Edition 3.2; Edition 3: 1999 Consolidated with Amendments 1: 2000
and 2: 2001
"Connectors for Electronic Equipment - Part 4-108: Printed Board
Connectors with Assessed Quality - Detail Specification for Cable-toBoard Connectors with a Modular Pitch of 25 mm and Integrated
Shielding Function
"Connectors for Electronic Equipment - Part 4-111: Printed Board
Connectors with Assessed Quality - Detail Specification for Two-Part
Power Connector Modules
"Materials for Printed Boards and Other Interconnecting Structures Part 2-4: Reinforced Base Materials
"Materials for Printed Boards and Other Interconnecting Structures Part 2-18: Reinforced Base Materials
TS 60034-20-1
61347-2-11
61360-2
61400-21
61300-3-25
61300-3-26
61300-3-27
61300-3-33
61300-3-34
61300-3-36
61300-3-39
61300-3-40
61306
61307
Rotating Electrical Machines - Part 20-1: Control Motors - Stepping
Motors First Edition
Lamp Controlgear - Part 2-11: Particular Requirements for
Miscellaneous Electronic Circuits Used with Luminaries First
Edition; Corrigendum 1:12-2001; Cancels and Replaces the First
Edition of IEC 60920:1990
Standard Data Element Types with Associated Classification Scheme
for Electric Components - Part 2: EXPRESS Dictionary Schema
Second Edition
Wind Turbine Generator Systems - Part 21: Measurement and
Assessment of Power Quality Characteristics of Grid Connected
Wind Turbines First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-25: Examinations and
Measurements - Concentricity of the Ferrules and Ferrules with Fibre
Installed First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-26: Examination and
Measurements - Measurement of the Angular Misalignment between
Fibre and Ferrules Axes First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-27: Examinations and
Measurements - Measurement Method for the Hole Location of a
Multiway Connector Plug First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-33: Examinations and
Measurements - Ferrule Withdrawal Force First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-34: Examinations and
Measurements - Attenuation of Random Mated Connectors Second
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-36: Examinations and
Measurements - Measurement Methods for the Inside and Outside
Diameters of Fibre Optic Connector Ferrules First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-39: Examinations and
Measurements - P C Optical Connector Reference Plug Selection
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-40: Examinations and
Measurements - Extinction Ratio of a Polarization Maintaining (pm)
Fibre Pigtailed Connector First Edition
Nuclear Instrumentation - Microprocessor Based Nuclear Radiation
Measuring Devices First Edition
Industrial Microwave Heating Installations - Test Methods for the
61308
61309
61310-1
61310-2
61310-3
61311
61312-1
TS 61312-2
TS 61312-3
TR 61312-4
61314-1
61314-1-1
61315
61316
61318
61319-1
61319-2
TR 61320
61321-1
61322
61323
Determination of Power Output First Edition
High-Frequency Dielectric Heating Installations - Test Methods for
the Determination of Power Output First Edition
Deep-Fat Fryers for Household Use - Methods for Measuring the
Performance First Edition
Safety of Machinery - Indication, Marking and Actuation - Part 1:
Requirements for Visual, Auditory and Tactile Signals First Edition;
Corrigendum 07/1995
Safety of Machinery - Indication, Marking and Actuation - Part 2:
Requirements for Marking First Edition
Safety of Machinery - Indication, Marking and Actuation - Part 3:
Requirements for the Location and Operation of Actuators First
Edition
Radiation Protection Instrumentation - Equipment for Continuously
Monitoring Beta and Gamma Emitting Radionuclides in Liquid
Effluents or in Surface Waters First Edition
Protection Against Lightning Electromagnetic Impulse - Part 1:
General Principles First Edition
Protection Against Lightning Electromagnetic Impulse (LEMP) - Part
2: Shielding of Structures, Bonding Inside Structures and Earthing
First Edition
Protection Against Lightning Electromagnetic Impulse - Part 3:
Requirements of Surge Protective Devices (SPDs) First Edition
Protection Against Lightning Electromagnetic Impulse - Part 4:
Protection of Equipment in Existing Structures First Edition
Fibre Optic Fan-Outs - Part 1: Generic Specification First Edition;
(IECQ QC 880000)
Fibre Optic Fan-Outs - Part 1-1: Blank Detail Specification Environmental Categories 1, 2, 3, 5 and 99 First Edition
Calibration of Fibre Optic Power Meters First Edition
Industrial Cable Reels Second Edition
Live Working - Guidelines for Quality Assurance Plans First Edition;
Corrigendum
Interconnections of Satellite Receiving Equipment - Part 1: Europe
First Edition; CENELEC EN 61319-1: 1996
Interconnections of Satellite Receiving Equipment - Part 2: Japan
First Edition
Handbook of Audio and Video Symbols First Edition
High-Voltage Testing Techniques with Very Fast Impulses - Part 1:
Measuring Systems for Very Fast Front Overvoltages Generated in
Gas-Insulated Substations First Edition
Radiation Protection Instrumentation - Installed Dose Equivalent
Rate Meters, Warning Assemblies and Monitors for Neutron
Radiation of Energy from Thermal to 15 MeV First Edition
Radiation Protection Instrumentation - Neutron Radiation - Direct
Reading Personal Dose Equivalent and/or Dose Equivalent Rate
61325
61326-1
61327
TR 61328
61329
61330
61331-1
61331-2
61331-3
61332
61333
TR 61334-1-1
TR 61334-1-2
TR 61334-1-4
61334-3-1
61334-3-21
61334-3-22
Monitors First Edition
Insulators for Overhead Lines with a Nominal Voltage Above 1 000
V - Ceramic or Glass Insulator Units for D.C. Systems - Definitions,
Test Methods and Acceptance Criteria First Edition; CENELEC EN
61325: 1995
Electrical Equipment for Measurement, Control and Laboratory Use EMC Requirements Edition 1.2; Edition 1: 1997 Consolidated with
Amendments 1: 1998 and 2: 2000
Helical-Scan Digital Composite Video Cassette Recording System
Using 12,65 mm (0,5 in) Magnetic Tape - Format D-3 First Edition;
CENELEC EN 61327: 1995; BS EN 61327: 1996
Live Working - Installation of Transmission Line Conductors and
Earthwires - Stringing Equipment and Accessory Items First Edition;
Corrigendum 01-1997
Sound System Equipment - Methods of Measuring and Specifying
the Performance of Sounders (Electroacoustic Transducers for Tone
Production) First Edition; CENELEC EN 61329: 1996
High-Voltage/Low-Voltage Prefabricated Substations First Edition;
CENELEC EN 61 330: 1996
Protective Devices Against Diagnostic Medical X-Radiation Part 1:
Determination of Attenuation Properties of Materials First Edition
Protective Devices Against Diagnostic Medical X-Radiation Part 2:
Protective Glass Plates First Edition
Protective Devices Against Diagnostic Medical X-Radiation - Part 3:
Protective Clothing and Protective Devices for Gonads First Edition
Soft Ferrite Material Classification First Edition
Marking on U and E Ferrite Cores First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 1: General Considerations - Section 1: Distribution Automation
System Architecture First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 1-2: General Considerations - Guide for Specification First
Edition
Distribution Automation Using Distribution Line Carrier Systems Part 1: General Considerations - Section 4: Identification of Data
Transmission Parameters Concerning Medium and Low-Voltage
Distribution Mains First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 3-1: Mains Signalling Requirements - Frequency Bands and
Output Levels First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 3: Mains Signalling Requirements - Section 21: MV Phase-toPhase Isolated Capacitive Coupling Device First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 3-22: Mains Signalling Requirements - MV Phase-to-Earth and
Screen-to-Earth Intrusive Coupling Devices First Edition
61334-4-1
61334-4-32
61334-4-33
61334-4-41
61334-4-42
61334-4-61
61334-4-511
61334-4-512
61334-5-1
TR 61334-5-2
TS 61334-5-4
61334-6
61335
TS 61334-5-3
61336
61337-1-1
Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols - Section 1: Reference Model
of the Communication System First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols - Section 32: Data Link Layer
- Logical Link Control (LLC) First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4-33: Data Communication Protocols - Data Link Layer Connection Oriented Protocol First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols - Section 41: Application
Protocols - Distribution Line Message Specification First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols - Section 42: Application
Protocols - Application Layer First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4-61: Data Communication Protocols - Network Layer Connectionless Protocol First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4-511: Data Communication Protocols - Systems MAnagement CIASE Protocol First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 4-512: Data Communication Protocols - Systems Management
Using Profile 61334-5-1 - Management Information Base (MIB) First
Edition
Distribution Automation Using Distribution Line Carrier Systems Part 5-1: Lower Layer Profiles - The Spread Frequency Shift Keying
(S-FSK) Profile Second Edition
Distribution Automation Using Distribution Line Carrier Systems Part 5-2: Lower Layer Profiles - Frequency Shift Keying (FSK)
Profile First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 5-4: Lower Layer Profiles - Multi-Carrier Modulation (MCM)
Profile First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule First Edition
Nuclear Instrumentation - Bore-Hole Apparatus for X-Ray
Fluorescence Analysis First Edition
Distribution Automation Using Distribution Line Carrier Systems Part 5-3 Lower-Layer Profiles - Spread Spectrum Adaptive Wideband
(SS-AW) Profile First Edition
Nuclear Instrumentation - Thickness Measurement Systems Utilizing
Ionizing Radiation - Definitions and Test Methods First Edition
Filters Using Waveguide Type Dielectric Resonators - Part 1:
General Information, Standard Values and Test Conditions - Section
1: General Information and Standard Values First Edition
61337-1-2
61338-1-1
61338-1-2
61338-1-3
PAS 61338-2
TR 61340-2-2
61340-2-3
61340-4-1
61340-4-3
TR 61340-5-1
TS 61340-5-2
61341
61342
61343
61344
61345
61347-1
61347-2-5
61347-2-6
61347-2-7
Filters Using Waveguide Type Dielectric Resonators - Part 1-2: Test
Conditions First Edition
Waveguide Type Dielectric Resonators - Part 1: General Information
and Test Conditions - Section 1: General Information First Edition
Waveguide Type Dielectric Resonators - Part 1-2: General
Information and Test Conditions - Test Conditions First Edition
Waveguide Type Dielecctric Resonators - Part 1-3: General
Information and Test Conditions - Measurement Method of Complex
Relative Permittivity for Dielectric Resonator Materials at
Microwave Frequency First Edition
Waveguide Type Dielectric Resonators - Part 2: Guide to the Use of
Waveguide Type Dielectric Resonators Edition 1.0
Electrostatics - Part 2-2: Measurement Methods - Measurement of
Chargeability First Edition
Electrostatics - Part 2-3: Methods of Test for Determining the
Resistaance and Resistivity of Solid Planar Materials Used to Avoid
Electrostatic Charge Accumulation First Edition
Electrostatics - Part 4: Standard Test Methods for Specific
Applications - Section 1: Electrostatic Behaviour of Floor Coverings
and Installed Floors First Edition
Electrostatics - Part 4-3: Standard Test Methods for Specific
Applications - Footwear First Edition
Electrostatics - Part 5-1: Protection of Electronic Devices from
Electrostatic Phenomena - General Requirements First Edition;
Corrigendum: 02-1999
Electrostatics - Part 5-2: Protection of Electronic Devices from
Electrostatic Phenomena - User Guide First Edition
Method of Measurement of Centre Beam Intensity and Beam
Angle(s) of Reflector Lamps First Edition
Nuclear Instrumentation - Multichannel Pulse Height Analyzers Main Characteristics, Technical Requirements and Test Methods First
Edition; Replaces IEC 60659: 1979
Nuclear Reactor Instrumentation - Boiling Light Water Reactors
(BWR) - Measurements in the Reactor Vessel for Monitoring
Adequate Cooling within the Core First Edition
Radiation Protection Instrumentation - Monitoring Equipment Personal Warning Devices for X and Gamma Radiations First Edition
UV Test for Photovoltaic (PV) Modules First Edition
Lamp Controlgear - Part 1: General and Safety Requirements First
Edition
Lamp Controlgear - Part 2-5: Particular Requirements for D.C.
Supplied Electronic Ballasts for Public Transport Lighting
Lamp Controlgear - Part 2-6: Particular Requirements for D.C.
Supplied Electronic Ballasts for Aircraft Lighting
Lamp Controlgear - Part 2-7: Particular Requirements for D.C.
Supplied Electronic Ballasts for Emergency Lighting First Edition
61347-2-8
61346-1
61346-2
TR 61346-4
61347-2-1
61347-2-2
61347-2-3
61347-2-4
61347-2-9
61347-2-10
61347-2-11
TR 61352
TR 61354
61355
61356
61358
Lamp Controlgear - Part 2-8: Particular Requirements for Ballasts for
Fluorescent Lamps First Edition; Cancels and Replaces the First
Edition of IEC 60920: 1990
Industrial Systems, Installations and Equipment and Industrial
Products - Structuring Principles and Reference Designations Part 1:
Basic Rules First Edition; Cancels and Replaces IEC 750: 1983
Industrial Systems, Installations and Equipment and Industrial
Products - Structuring Principles and Reference Designations - Part 2:
Classification of Objects and Codes for Classes First Edition
Industrial Systems, Installations and Equipment and Industrial
Products - Structuring Principles and Reference Designations Part 4:
Discussion of Concepts First Edition
Lamp Controlgear - Part 2-1: Particular Requirements for Starting
Devices (Other Than Glow Starters) First Edition; Cancels and
Replaces The Second Edition of IEC 60926: 1995
Lamp Controlgear - Part 2-2: Particular Requirements for D.C or A.C
Supplied Electronic Step-Down Convertors for Filament Lamps First
Edition; Cancels and Replaces the Second Edition of IEC 61046:
1993
Lamp Controlgear - Part 2-3: Particular Requirements for A.C.
Supplied Electronic Ballasts for Fluorescent Lamps First Edition;
Cancels and Replaces the Second Edition of IEC 60928: 1995
Lamp Controlgear - Part 2-4: Particular Requirements for D.C.
Supplied Electronic Ballasts for General Lighting First Edition;
Cancels and Replaces Section Three of the First Edition of IEC
60924: 1990
Lamp Controlgear - Part 2-9: Particular Requirements for Ballasts for
Discharge Lamps (Excluding Fluorescent Lamps) First Edition
Lamp Controlgear - Part 2-10: Particular Requirements for Electronic
Invertors and Convertors for High-Frequency Operation of Cold Start
Tubular Discharge Lamps (Neon Tubes) First Edition
Lamp Controlgear - Part 2-11: Particular Requirements for
Miscellaneous Electronic Circuits Used with Luminaries First
Edition; Corrigendum 1:12-2001; Cancels and Replaces the First
Edition of IEC 60920:1990
Mnemonics and Symbols for Integrated Circuits First Edition
Electricity Meters - Marking of Auxiliary Terminals for Tariff
Devices First Edition
Classification and Designation of Documents for Plants, Systems and
Equipment First Edition
Functional Evaluation of Electrical Insulation Systems - Principles
for Test Procedures When Comparative Testing is Not Feasible First
Edition
Acceptance Inspection for Direct Connected Alternating Current
Static Watt-Hour Meters for Active Energy (Classes 1 and 2) First
Edition CENELEC EN 61 358: 1996
61359
61360-1
61360-2
TR 61360-3
TR 61361
61362
61360-4
61363-1
TR 61364
TR 61366-1
TR 61366-2
TR 61366-3
TR 61366-4
TR 61366-5
TR 61366-6
TR 61366-7
61373
Evaluation and Identification of Electric Insulation Systems Environment Evaluation First Edition
Standard Data Element Types with Associated Classification Scheme
for Electric Components - Part 1: Definitions - Principles and
Methods First Edition; CENELEC EN 61360-1: 1995
Standard Data Element Types with Associated Classification Scheme
for Electric Components - Part 2: EXPRESS Dictionary Schema First
Edition
Standard Data Element Types with Associated Classification Scheme
for Electric Components - Part 3: Maintenance and Validation
Procedures First Edition
Electricity Metering - Local and Remote Data Exchange Applications and Performance First Edition
Guide to Specification of Hydraulic Turbine Control Systems First
Edition; Corrigendum: 3-2000
Standard Data Element Types with Associated Classification Scheme
for Electric Components - Part 4: IEC Reference Collection of
Standard Data Element Types, Component Classes and Terms First
Edition
Electrical Installations of Ships and Mobile and Fixed offshore Units
- Part 1: Procedures for Calculating Short-Circuit Currents in ThreePhase a.c. First Edition
Nomenclature for Hydroelectric Powerplant Machinery First Edition;
Corrigendum August 2000
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 1: General and Annexes First Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 2: Guidelines for Technical Specifications for
Francis Turbines First Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 3: Guidelines for Technical Specifications for
Pelton Turbines First Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 4: Guidelines for Technical Specifications for
Kaplan and Propeller Turbines First Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 5: Guidelines for Technical Specifications for
Tubular Turbines First Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 6: Guidelines for Technical Specifications for
Pump-Turbines First Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering
Documents - Part 7: Guidelines for Technical Specifications for
Storage Pumps First Edition
Railway Applications - Rolling Stock Equipment - Shock and
Vibration Tests First Edition
TR 61374
61375-1
61377
61378-1
61378-2
TR 61382-1
61386-1
TR 61390
TR 61394
61395
61400-1
61400-2
61400-11
61400-12
TS 61400-13
TS 61400-23
TR 61423-1
TR 61423-2
61427
61428
61429
TR 61430
Overvoltages in Traction Supply Systems First Edition
Electric Railway Equipment - Train Bus - Part 1: Train
Communication Network First Edition
Electric Traction - Rolling Stock - Combined Testing of Inverter-Fed
Alternating Current Motors and Their Control First Edition
Convertor Transformers - Part 1: Transformers for Industrial
Applications First Edition
Convertor Transformers - Part 2: Transformers for HVDC
Applications First Edition
Nickel/Cadmium Rechargeable Cells and Batteries for Electric Road
Vehicle Propulsion Applications - Part 1: Dynamic Discharge
Performance Test (DDPT) and Dynamic Endurance Test (DET) First
Edition
Conduit Systems for Electrical Installations - Part 1: General
Requirements First Edition; Amendment 1, 11-2000
Ultrasonics - Real-Time Pulse-Echo Systems - Test Procedures to
Determine Performance Specification First Edition
Overhead Lines - Characteristics of Greases for Aluminium,
Aluminium Alloy and Steel Bare Conductors First Edition
Overhead Electrical Conductors - Creep Test Procedures for Stranded
Conductors
Wind Turbine Generator Systems - Part 1: Safety Requirements
Second Edition
Wind Turbine Generator Systems - Part 2: Safety of Small Wind
Turbines First Edition
Wind Turbine Generator Systems - Part 11: Acoustic Noise
Measurement Techniques First Edition
Wind Turbine Generator Systems - Part 12: Wind Turbine Power
Performance Testing First Edition
Wind Turbine Generator Systems - Part 13: Measurement of
Mechanical Loads First Edition
Wind Turbine Generator Systems - Part 23: Full-Scale Structural
Testing of Rotor Blades First Edition
Heating Cables for Industrial Applications - Part 1: Performance
Requirements and Test Methods First Edition
Heating Cables for Industrial Applications - Part 2: Constructional
and Material Requirements First Edition
Secondary Cells and Batteries for Solar Photovoltaic Energy Systems
- General Requirements and Methods of Test First Edition
Nuclear Instrumentation - Sample Containers for Gamma-Ray
Spectrometry with Ge-Detectors First Edition
Marking of Secondary Cells and Batteries with the International
Recycling Symbol ISO 7000-1135 First Edition
Secondary Cells and Batteries - Test Methods for Checking the
Performance of Devices Designed for Reducing Explosion Hazards Lead-Acid Starter Batteries First Edition
TR 61431
61434
61435
61436
TR 61438
61440
61442
61443
61452
61453
61455
TR 61459
TR 61462
TS 61463
61466-1
61466-2
TR 61464
Guide for the Use of Monitor Systems for Lead-Acid Traction
Batteries First Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Guide to the Designation of Current in Alkaline
Secondary Cell and Battery Standards First Edition
Nuclear Instrumentation - High-Purity Geramanium Crystals for
Radiation Detectors First Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Sealed Nickel-Metal Hydride Rechargeable
Single Cells First Edition
Possible Safety and Health Hazards in the Use of Alkaline Secondary
Cells and Batteries - Guide to Equipment Manufacturers and Users
First Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Sealed Nickel-Cadmium Small Prismatic
Rechargeable Single Cells First Edition
Electric Cables - Test Methods for Accessories for Power Cables with
Rated Voltages from 6 kV (Um=7,2 kV) up to 30 kV (Um=36 kV)
First Edition
Short-Circuit Temperature Limits of Electric Cables with Rated
Voltages Above 30 kV (Um = 36 kV) First Edition
Nuclear Instrumentation - Measurement of Gamma-Ray Emission
Rates of Radionuclides - Calibration and Use of Germanium
Spectrometers First Edition
Nuclear Instrumentation - Thallium Activated Sodium Iodide
Detector Systems for Assay of Radionuclides - Calibration and Usage
First Edition
Nuclear Instrumentation - MCA Histogram Data Interchange Format
for Nuclear Spectroscopy First Edition
Low-Voltage Fuses - Coordination between Fuses and
Contactors/Motor-Starters - Application Guide First Edition;
Corrigendum 1-02 2001
Composite Insulators - Hollow Insulators for Use in Outdoor and
Indoor Electrical Equipment - Definitions, Test Methods, Acceptance
Criteria and Design Recommendations First Edition
Bushings - Seismic Qualification Edition 1.1; Edition 1:1996
Consolidated with Amendment 1:2000
Composite String Insulator Units for Overhead Lines with a Nominal
Voltage Greater Than 1 000 V - Part 1: Standard Strength Classes and
End Fittings First Edition
Composite String Insulator Units for Overhead Lines with a Nominal
Voltage Greater Than 1 000 V - Part 2: Dimensional and Electrical
Characteristics First Edition
Insulated Bushings - Guide for the Interpretation of Dissolved Gas
Analysis (DGA) in Bushings where Oil is the Impregnating Medium
of the Main Insulation (General Paper) First Edition
TR 61467
61468
61472
61477
61478
61479
61481
61491
61496-1
61496-2
61496-3
61497
PAS 61499-1
PAS 61499-2
61500
61501
61502
61504
61505
61506
61508-1
Insulators for Overhead Lines with a Nominal Voltage Above 1 000
V - AC Power Arc Tests on Insulator Sets First Edition; Corrigendum
May 1997
Nuclear Power Plants - In-Core Instrumentation - Characteristics and
Test Methods of Self-Powered Neutron Detectors First Edition
Live Working - Minimum Approach Distances - Method of
Calculation First Edition
Live Working - Minimum Requirements for the Utilization of Tools,
Devices and Equipment First Edition
Live Working - Ladders of Insulating Material First Edition
Live Working - Flexible Conductor Covers (Line Hoses) of
Insulating Material First Edition
Live Working - Portable Phase Comparators for Use on Voltages
from 1 kV to 36 kV a.c. First Edition
Electrical Equipment of Industrial Machines - Serial Data Link for
Real-Time Communication Between Controls and Drives First
Edition
Safety of Machinery - Electro-Sensitive Protective Equipment - Part
1: General Requirements and Tests First Edition; Corrigendum-1998
Safety of Machinery - Electro-Sensitive Protective Equipment - Part
2: Particular Requirements for Equipment Using Active OptoElectronic Protective Devices (AOPDs) First Edition
Safety of Machinery - Electro-Sensitive Protective Equipment - Part
3: Particular Requirements for Active Opto-Electronic Protective
Devices Responsive to Diffuse Reflection (AOPDDR) First Edition
Nuclear Power Plants - Electrical Interlocks for Functions Important
to Safety - Recommendations for Design and Implementation First
Edition
Function Blocks for Industrial-Process Measurement and Control
Systems Part 1: Architecture Edition 1.0
Function Blocks for Industrial-Process Measurement and Control
Systems - Part 2: Software Tools Requirements Edition 1.0
Nuclear Power Plants - Instrumentation and Control Systems
Important to Safety - Functional Requirements for Multiplexed Data
Transmission First Edition
Nuclear Reactor Instrumentation - Wide Range Neutron Fluence Rate
Meter - Mean Square Voltage Method First Edition
Nuclear Power Plants - Pressurized Water Reactors - Vibration
Monitoring of Internal Structures First Edition
Nuclear Power Plants - Instrumentation and Control Systems
Important to Safety - Plant-Wide Radiation Monitoring First Edition
Nuclear Reactor Instrumentation - Boiling Water Reactors (BWR) Stability Monitoring First Edition
Industrial-Process Measurement and Control - Documentation of
Application Software First Edition
Functional Safety of Electrical/Electronic/Programmable Electronic
61508-3
61508-4
61508-7
61508-2
61508-5
61508-6
TR 61510
61512-1
61513
61514
61515
61518
61520
61525
61526
61540
Safety-Related Systems - Part 1: General Requirements First Edition;
Corrigendum: 05-1999
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems - Part 3: Software Requirements First
Edition; Corrigendum: 04-1999
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems - Part 4: Definitions and Abbreviations First
Edition; Corrigendum: 04-1999
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems - Part 7: Overview of Techniques and
Measures First Edition
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems - Part 2: Requirements for
Electrical/Electronic/Programmable Electronic Safety-Related
Systems First Edition
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems - Part 5: Examples of Methods for the
Determination of Safety Integrity Levels First Edition; Corrigendum:
04-1999
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems - Part 6: Guidelines on the Application of
IEC 61508-2 and IEC 61508-3 First Edition
RBMK Nuclear Reactors - Proposals for Instrumentation and Control
Improvements First Edition
Batch Control - Part 1: Models and Terminology First Edition
Nuclear Power Plants - Instrumentation and Control for Systems
Important to Safety - General Requirements for Systems First Edition
Industrial-Process Control Systems - Methods of Evaluating the
Performance of Valve Positioners with Pneumatic Outputs First
Edition
Mineral Insulated Thermocouple Cables and Thermocouples First
Edition; CENELEC EN 61515: 1996
Mating Dimensions between Differential Pressure (Type) Measuring
Instruments and Flanged-On Shut-Off Devices up to 413 Bar (41,3
MPa) First Edition
Metal Thermowells for Thermometer Sensors - Functional
Dimensions First Edition
Radiation Protection Instrumentation - X, Gamma, High Energy Beta
and Neutron Radiations - Direct Reading Personal Dose Equivalent
and/or Dose Equivalent Rate Monitors First Edition
Radiation Protection Instrumentation - Measurement of Personal
Dose Equivalents Hp(10) and Hp(0,07) for X, Gamma and Beta
Radiations - Direct Reading Personal Dose Equivalent and/or Dose
Equivalent Rate Dosemeters First Edition
Electrical Accessories - Portable Residual Current Devices without
Integral Overcurrent Protection for Household and Similar Use
61543
61545
61547
61549
61554
61557-1
61558-1
61558-2-1
61558-2-2
61557-2
61557-3
61557-4
61558-2-3
61558-2-4
61558-2-5
(PRCDs) Edition 1.1: 1997 Consolidated with Amendment 1: 1998
Residual Current-Operated Protective Devices (RCDs) for Household
and Similar Use - Electromagnetic Compatibility First Edition;
CENELEC EN 61543: 1995
Connecting Devices - Devices for the Connection of Aluminium
Conductors in Clamping Units of Any Material and Copper
Conductors in Aluminium Bodied Clamping Units First Edition
Equipment for General Lighting Purposes - EMC Immunity
Requirements First Edition; Amendment 1-2000
Miscellaneous Lamps Edition 1.2; Edition 1: 1996 Consolidated with
Amendments 1: 1997 and 2: 1999; Corrigendum: 2000
Panel Mounted Equipment - Electrical Measuring Instruments Dimensions for Panel Mounting First Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 1: General Requirements
First Edition
Safety of Power Transformers, Power Supply Units and Similar - Part
1: General Requirements and Tests Edition 1.1; Edition 1: 1997
Consolidated with Amendment 1: 1998
Safety of Power Transformers, Power Supply Units and Similar - Part
2: Particular Requirements for Separating Transformers for General
Use First Edition
Safety of Power Transformers, Power Supply Units and Similar - Part
2-2: Particular Requirements for Control Transformers First Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 2: Insulation Resistance
First Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 3: Loop Impedance First
Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 4: Resistance of Earth
Connection and Equipotential Bonding First Edition
Safety of Power Transformers, Power Supply Units and Similar
Devices - Part 2-3: Particular Requirements for Ignition Transformers
for Gas and Oil Burners First Edition
Safety of Power Transformers, Power Supply Units and Similar - Part
2: Particular Requirements for Isolating Transformers for General
Use First Edition
Safety of Power Transformers, Power Supply Units and Similar - Part
2-5: Particular Requirements for Shaver Transformers and Shaver
Supply Units First Edition
61558-2-6
61558-2-7
61558-2-8
61558-2-12
61558-2-13
61558-2-15
61558-2-17
61558-2-19
61558-2-20
61558-2-23
61559
61560
61562
61563
61566
61577-1
Safety of Power Transformers, Power Supply Units and Similar - Part
2: Particular Requirements for Safety Isolating Transformers for
General Use
Safety of Power Transformers, Power Supply Units and Similar - Part
2: Particular Requirements for Transformers for Toys First Edition
Safety of Small Power Transformers, Power Supply Units and
Similar - Part 2-8: Particular Requirements for Bell and Chime
Transformers First Edition
Safety of Power Transformers, Power Supply Units and Similar
Devices - Part 2-12: Particular Requirements for Constant Voltage
Transformers First Edition
Safety of Power Transformers, Power Supply Units and Similar
Devices - Part 2-13: Particular Requirements for Auto-Transformers
for General Use First Edition
Safety of Power Transformers, Power Supply Units and Similar - Part
2-15: Particular Requirements for Isolating Transformers for the
Supply of Medical Locations First Edition
Safety of Power Transformers, Power Supply Units and Similar - Part
2: Particular Requirements for Transformers for Switch Mode Power
Supplies First Edition
Safety of Power Transformers, Power Supply Units and Similar
Devices - Part 2-19: Particular Requirements for Perturbation
Attenuation Transformers First Edition
Safety of Power Transformers, Power Supply Units and Similar
Devices - Part 2-20: Particular Requirements for Small Reactors First
Edition
Safety of Power Transformers, Power Supply Units and Similar
Devices - Part 2-23: Particular Requirements for Transformers for
Construction Sites First Edition 05-2000
Radiation in Nuclear Facilities - Centralized System for Continuous
Monitoring of Radiation and/or Levels of Radioactivity First Edition
Radiation Protection Instrumentation - Apparatus for NonDestructive Radiation Tests of Fur and Other Cloth Samples First
Edition
Radiation Protection Instrumentation - Portable Equipment for
Measuring Specific Activity of Beta-Emitting Radionuclides in
Foodstuffs First Edition
Radiation Protection Instrumentation - Equipment for Measuring
Specific Activity of Gamma-Emitting Radionuclides in Foodstuffs
First Edition
Measurement of Exposure to Radiofrequency Electromagnetic Fields
- Field Strength in the Frequency Range 100 kHz to 1 GHz First
Edition
Radiation Protection Instrumentation - Radon and Radon Decay
Product measuring Instruments - Part 1: General Requirements First
Edition
61577-2
61580
61580-1
61580-2
61580-3
61580-7
61580-8
61580-9
61584
TR 61586
61587-1
61587-2
TS 61587-3
61591
TR 61592
61595-1
61595-2
61595-3
61596
TR 61597
61599
Radiation Protection Instrumentation - Radon and Radon Decay
Product Measuring Instruments - Part 2: Specific Requirements for
Radon Measuring Instruments First Edition
Measurement of Return Loss on Waveguide and Waveguide
Assemblies First Edition
Methods of Measurement for Waveguides - Part 1: Decoupling and
Rotation of the Plane of Polarization First Edition
Methods of Measurement for Waveguides - Part 2: Level of
Intermodulation Products First Edition
Methods of Measurement for Waveguides - Part 3: Variation of
Group Delay First Edition
Methods of Measurement for Waveguides - Part 7: Graphical Method
for the Determination of Waveguide Performance First Edition
Methods of Measurement for Waveguides - Part 8: Waveguide Power
Holding Capability First Edition
Methods of Measurement for Waveguides - Part 9: Reflection
Coefficient at Rectangular Waveguide Interfaces First Edition
Radiation Protection Instrumentation - Installed, Portable or
Transportable Assemblies - Measurement of Air Kerma Direction and
Air Kerma Rate First Edition
Estimation of the Reliability of Electrical Connectors First Edition
Mechanical Structures for Electronic Equipment - Tests for IEC
60917 and IEC 60297 - Part 1: Climatic, Mechanical Tests and Safety
Aspects for Cabinets, Racks, Subracks and Chassis First Edition
Mechanical Structures for Electronic Equipment - Tests for IEC
60917 and IEC 60297 - Part 2: Seismic Tests for Cabinets and Racks
First Edition
Mechanical Structures for Electronic Equipment - Tests for IEC
60917 and IEC 60297 - Part 3: Electromagnetic Shielding
Performance Tests for Cabinets, Racks and Subracks First Edition
Household Range Hoods - Methods for Measuring Performance First
Edition
Household Electrical Appliances - Guidelines for Consumer Panel
Testing First Edition
Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel
System, for Professional Use - Part 1: Format A First Edition
Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel
System, for Professional Use - Part 2: Format B First Edition
Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel
System, for Professional Use - Part 3: 24-Bit Operation for 16-Bit
Media First Edition
Magnetic Oxide EP-Cores and Associated Parts for Use in Inductors
and Transformers - Dimensions First Edition
Overhead Electrical Conductors - Calculation Methods for Stranded
Bare Conductors First Edition
Videodisk Players - Methods of Measurement First Edition
TR 61602
61603-1
61603-6
61603-2
61603-3
TR 61604
61605
61606
61609
61610
61619
61620
61621
TR 61624
61628-1
61628-2
61629-1
61629-2
61631
Connectors Used in the Field of Audio, Video and Audiovisual
Engineering First Edition
Transmission of Audio and/or Video and Related Signals Using
Infra-Red Radiation - Part 1: General First Edition; Corrigendum1997; Replaces IEC 60764: 1983
Transmission of Audio and/or Video and Related Signals Using
Infra-Red Radiation - Part 6: Video and Audio-Visual Signals First
Edition
Transmission of Audio and /or Video and Related Signals Using
Infra-Red Radiation - Part 2: Transmission Systems for Audio Wide
Band and Related Signals First Edition; Replaces IEC 764
Transmission of Audio and/or Video and Related Signals Using
Infra-Red Radiation - Part 3: Transmission Systems for Audio
Signals for Conference and Similar Systems First Edition
Dimensions of Uncoated Ring Cores of Magnetic Oxides First
Edition
Fixed Inductors for Use in Electronic and Telecommunication
Equipment - Marking Codes First Edition
Audio and Audiovisual Equipment - Digital Audio Parts - Basic
Methods of Measurement of Audio Characteristics First Edition
Microwave Ferrite Components - Guide for Drafting of
Specifications First Edition
Prints and Transparencies Produced from Electronic Sources Assessment of Image Quality First Edition; CENELEC EN 61610:
1996
Insulating Liquids - Contamination by Polychlorinated Biphenyls
(PCBs) - Method of Determination by Capillary Column Gas
Chromatography First Edition
Insulating Liquids - Determination of the Dielectric Dissipation
Factor by Measurement of the Conductance and Capacitance - Test
Method First Edition
Dry, Solid Insulating Materials - Resistance Test to High-Voltage,
Low-Current Arc Discharges First Edition
Guidance on the Development of Lists of Maximum Allowable
Temperatures for Polymeric Compounds Used in Electrotechnical
Equipment First Edition
Corrugated Pressboard and Presspaper for Electrical Purposes - Part
1: Definitions, Designations and General Requirements First Edition
Corrugated Pressboard and Presspaper for Electrical Purposes - Part
2: Methods of Test First Edition
Aramid Pressboard for Electrical Purposes - Part 1: Definitions,
Designations and General Requirements First Edition
Aramid Pressboard for Electrical Purposes - Part 2: Methods of Test
First Edition
Test Method for the Mechanical Strength of Cores Made of Magnetic
Oxides First Edition
TR 61633
TR 61634
TR 61639
TR 61640
TR 61641
61642
61643-311
61643-321
61646
61643-1
61643-21
61649
61650
61660-1
61660-2
TR 61660-3
TR 61662
61663-1
High-Voltage Alternating Current Circuit-Breakers - Guide for ShortCircuit and Switching Test Procedures for Metal-Enclosed and Dead
Tank Circuit-Breakers First Edition
High-Voltage Switchgear and Controlgear - Use and Handling of
Sulphur Hexafluoride (SF6) in High-Voltage Switchgear and
Controlgear First Edition
Direct Connection Between Power Transformers and Gas-Insulated
Metal-Enclosed Switchgear for Rated Voltages of 72,5 kV and Above
First Edition
Rigid High-Voltage, Gas-Insulated Transmission Lines for Rated
Voltage of 72,5 kV and Above First Edition
Enclosed Low Voltage Switchgear and Controlgear Assemblies Guide for Testing under Conditions of Arcing Due to Internal Fault
First Edition
Industrial a.c. Networks Affected by Harmonics - Application of
Filters and Shunt Capacitors First Edition
Components for Low-Voltage Surge Protective Devices - Part 311:
Specification for Gas Discharge Tubes (GDT) First Edition
Components for Low-Voltage Surge Protective Devices - Part 321:
Specification for Avalanche Breakdown Diode (ABD) First Edition
Thin-Film Terrestrial Photovoltaic (PV) Modules - Design
Qualification and Type Approval First Edition
Surge Protective Devices Connected to Low-Voltage Power
Distribution Systems - Part 1: Performance Requirements and Testing
Methods First Edition; Corrigendum: 1998; Amendment 1: 10/2001;
Corrigendum 1 12/2001
Low Voltage Surge Protective Devices - Part 21: Surge Protective
Devices Connected to Telecommunications and Signalling Networks
- Performance Requirements and Testing Methods First Edition;
Corrigendum 1: 2001
Goodness-of-Fit Tests, Confidence Intervals and Lower Confidence
Limits for Weibull Distributed Data First Edition
Reliability Data Analysis Techniques - Procedures for Comparison of
Two Contant Failure Rates and Two Constant Failure (Event)
Intensities First Edition
Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants
and Substations - Part 1: Calculation of Short-Circuit Currents First
Edition; Corrigendum: 03-1999; Corrigendum: 03-2000
Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants
and Substations - Part 2: Calculation of Effects First Edition
Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants
and Substations - Part 3: Examples of Calculations First Edition;
Should be Read in Conjunction with IEC 61660-1 and IEC 61660-2
Assessment of the Risk of Damage Due to Lightning First Edition;
Amendment 1-1996
Lightning Protection - Telecommunication Lines - Part 1: Fibre Optic
61663-2
61666
61669
61674
61675-1
61675-2
61675-3
61683
61685
61689
61691-1
61691-2
61691-3-3
61701
61702
61709
61710
61713
61721
61724
61725
61726
Installations First Edition; Corrrigendum: 10/1999
Lightning Protection - Telecommunication Lines - Part 2: Lines
Using Metallic Conductors First Edition
Industrial Systems, Installations and Equipment and Industrial
Products - Identification of Terminals within a System First Edition
Electroacoustics - Equipment for the Measurement of Real-Ear
Acoustical Characteristics of Hearing Aids First Edition
Medical Electrical Equipment - Dosimeters with Ionization Chambers
and/or Semi-Conductor Detectors as Used in X-ray Diagnostic
Imaging First Edition
Radionuclide Imaging Devices - Characteristics and Test Conditions Part 1: Positron Emission Tomographs First Edition
Radionuclide Imaging Devices - Characteristics and Test Conditions Part 2: Single Photon Emission Computed Tomographs First Edition
Radionuclide Imaging Devices - Characteristics and Test Conditions Part 3: Gamma Camera Based Wholebody Imaging Systems First
Edition
Photovoltaic Systems - Power Conditioners - Procedure for
Measuring Efficiency First Edition
Ultrasonics - Flow Measurement Systems - Flow Test Object First
Edition
Ultrasonics - Physiotherapy Systems - Performance Requirements
and Methods of Measurement in the Frequency Range 0,5 MHz to 5
MHz First Edition
Design Automation - Part 1: VHDL Language Reference Manual
First Edition
Behavioural Languages - Part 2: VHDL Multilogic System for Model
Interoperability First Edition
Behavioural Languages - Part 3-3: Synthesis in VHDL First Edition
Salt Mist Corrosion Testing of Photovoltaic (PV) Modules First
Edition
Rating of Direct Coupled Photovoltaic (PV) Pumping Systems First
Edition
Electronic Components - Reliability - Reference Conditions for
Failure Rates and Stress Models for Conversion First Edition
Power Law Model - Goodness-Of-Fit Tests and Estimation Methods
Software Dependability Through the Software Life-Cycle Processes Application Guide First Edition
Susceptibility of a Photovoltaic (PV) Module to Accidental Impact
Damage (Resistance to Impact Test) First Edition
Photovoltaic System Performance Monitoring - Guidelines for
Measurement, Data Exchange and Analysis First Edition
Analytical Expression for Daily Solar Profiles First Edition
Cable Assemblies, Cables, Connectors and Passive Microwave
Components - Screening Attenuation Measurement by the
Reverberation Chamber Method Second Edition
61727
TR 61734
61739
61744
61745
61754-12
61754-13
61754-15
61754-16
61754-18
61754-19
PAS 61754-20
61757-1
61760-1
61760-2
61770
61771
61772
61773
TR 61774
61779-1
61788-1
Photovoltaic (PV) Systems - Characteristics of the Utility Interface
First Edition; CENELEC EN 61727: 1995
Application of IEC 60617-12 and IEC 60617-13 Standards First
Edition
Integrated Circuits - Procedures for Manufacturing Line Approval
and Quality Management First Edition; (IECQ QC 211000)
Calibration of Fibre Optic Chromatic Dispersion Test Sets First
Edition
End-Face Image Analysis Procedure for the Calibration of Optical
Fibre Geometry Test Sets First Edition
Fibre Optic Connector Interfaces - Part 12: Type FS Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 13: Type FC-PC Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 15: Type LSH Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 16: Type PN Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 18: Type MT-RJ Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 19: Type SG Connector
Family First Edition
Fibre Optic Connectors Interfaces - Part 20: Type LC Connector
Family Edition 1.0
Fibre Optic Sensors - Part 1: Generic Specification First Edition; QC
890000
Surface Mounting Technology - Part 1: Standard Method for the
Specification of Surface Mounting Components (SMDs) First Edition
Surface Mounting Technology - Part 2: Transportation and Storage
Conditions of Surface Mounting Devices (SMD) - Application Guide
First Edition
Electric Appliances Connected to the Water Mains - Avoidance of
Backsiphonage and Failure of Hose-Sets First Edition
Nuclear Power Plants - Main Control-Room - Verification and
Validation of Design First Edition
Nuclear Power Plants - Main Control Room - Application of Visual
Display Units (VDU) First Edition
Overhead Lines - Testing of Foundations for Structures First Edition;
Corrigendum-March 1997
Overhead lines - Meteorological Data for Assessing Climatic Loads
First Edition
Electrical Apparatus for the Detection and Measurement of
Flammable Gases - Part 1: General Requirements and Test Methods
First Edition
Superconductivity - Part 1: Critical Current Measurement - DC
Critical Current of Cu/Nb-Ti Composite Superconductors First
61788-2
61788-3
61779-2
61779-3
61779-4
61779-5
61779-6
61786
61788-4
61788-5
61194
61195
61196-1
61196-3
61196-4
Edition
Superconductivity - Part 2: Critical Current Measurement - DC
Critical Current of Nb3Sn Composite Superconductors First Edition
Superconductivity - Part 3: Critical Current Measurement - DC
Critical Current of Ag-Sheathed Bi-2212 and Bi-2223 Oxide
Superconductors First Edition
Electrical Apparatus for the Detection and Measurement of
Flammable Gases - Part 2: Performance Requirements for Group I
Apparatus Indicating a Volume Fraction Up to 5% Methane in Air
First Edition
Electrical Apparatus for the Detection and Measurement of
Flammable Gases - Part 3: Performance Requirements for Group I
Apparatus Indicating a Volume Fraction Up to 100% Methane in Air
First Edition
Electrical Apparatus for the Detection and Measurement of
Flammable Gases - Part 4: Performance Requirements for Group II
Apparatus Indicating a Volume Fraction Up to 100% Lower
Explosive Limit First Edition
Electrical Apparatus for the Detection and Measurement of
Flammable Gases - Part 5: Performance Requirements for Group II
Apparatus Indicating a Volume Fraction Up to 100% Gas First
Edition
Electrical Apparatus for the Detection and Measurement of
Flammable Gases - Part 6: Guide for the Selection, Installation, Use
and Maintenance of Apparatus for the Detection and Measurement of
Flammable Gases First Edition
Measurement of Low-Frequency Magnetic and Electric Fields with
Regard to Exposure of Human Beings - Special Requirements for
Instruments and Guidance for Measurements First Edition
Superconductivity - Part 4: Residual Resistance Ratio Measurement Residual Resistance Ratio of Nb-Ti Composite Superconductors First
Edition
Superconductivity - Part 5: Matrix to Superconductor Volume Ratio
Measurement - Copper to Superconductor Volume Ratio of Cu/Nb-Ti
Composite Superconductors First Edition
Characteristic Parameters of Stand-Alone Photovoltaic (PV) Systems
First Edition; CENELEC EN 61194: 1995
Double-Capped Fluorescent Lamps - Safety Specifications Second
Edition; Corrigendum-2000
Radio-Frequency Cables - Part 1: Generic Specification - General,
Definitions, Requirements and Test Methods First Edition;
Amendment 1: 08/1999
Radio-Frequency Cables - Part 3: Sectional Specification for Coaxial
Cables for Local Area Networks First Edition
Radio-Frequency Cables - Part 4: Sectional Specification for
Radiating Cables First Edition
61197
61198
61199
61196-2
61196-3-1
61196-3-2
61196-3-3
61200-52
TR 61200-53
TR 61200-413
TR 61200-704
61201
61202-1
61203
61204
61204-3
61204-6
61205
Insulating Liquids - Linear Flame Propagation - Test Method Using a
Glass-Fibre Tape First Edition; CENELEC EN 61197: 1994
Mineral Insulating Oils - Methods for the Determination of 2-Furfural
and Related Compounds First Edition; CENELEC EN 61198: 1994
Single-Capped Fluorescent Lamps - Safety Specifications Second
Edition
Radio-Frequency Cables - Part 2: Sectional Specification for SemiRigid Radio- Frequency and Coaxial Cables with
Polytetrafluoroethylene (PTFE) Insulation Second Edition
Radio-Frequency Cables - Part 3: Coaxial Cables for Digital
Communication in Horizontal Floor Wiring - Section 1: Detail
Specification for Cables of 500 m Reach and up to 10 Mb/s First
Edition
Radio Frequency Cables - Part 3-2: Coaxial Cables for Digital
Communication in Horizontal Floor Wiring - Detail Specification for
Coaxial Cables with Solid Dielectric for Local Area Networks of 185
m Reach and Up to 10 Mb/s First Edition
Radio Frequency Cables - Part 3-3: Coaxial Cables for Digital
Communiaction in Horizontal Floor Wiring - Detail Specification for
Coaxial Cables with Foamed Dielectric for Local Area Networks of
185 m Reach and Up to 10 Mb/s First Edition
Electrical Installation Guide - Part 52: Selection and Erection of
Electrical Equipment - Wiring Systems First Edition
Electrical Installation Guide - Part 53: Selection and Erection of
Electrical Equipment - Switchgear and Controlgear First Edition;
Corrigendum 10/1995
Electrical Installation Guide - Part 413: Protection Against Indirect
Contact - Automatic Disconnection of Supply First Edition
Electrical Installation Guide - Part 704: Construction and Demolition
Site Installations First Edition
Extra-Low Voltage (ELV) - Limit Values First Edition
Fibre Optic Isolators - Part 1: Generic Specification Second Edition;
IECQ QC 830000
Synthetic Organic Esters for Electrical Purposes - Guide for
Maintenance of Transformer Esters in Equipment First Edition;
CENELEC EN 61203: 1994
Low-Voltage Power Supply Devices, D.C. Output - Performance
Characteristics Edition 1.1; Edition 1 Consolidated with Amendment
1:2001
Low-Voltage Power Supplies, D.C. Output - Part 3: Electromagnetic
Compatibility (EMC) First Edition; Corrigendum: 12 2000
Low-Voltage Power Supplies, D.C. Output - Part 6: Requirements for
Low-Voltage Power Supplies of Assessed Performance First Edition
Ultrasonics - Dental Descaler Systems - Measurement and
Declaration of the Output Characteristics First Edition; (CENELEC
EN 61205: 1994)
61206
61207-1
61207-2
61207-3
61207-6
61210
61211
61212-2
61209
61212-1
61212-3-1
61212-3-2
61212-3-3
61213
61214
61215
Ultrasonics - Continuous-Wave Doppler Systems - Test Procedures
First Edition; (AS/NZS 4188: 1994) (CENELEC EN 61206: 1995)
Expression of Performance of Gas Analyzers - Part 1: General First
Edition; CEN EN 61207-1: 1994
Expression of Performance of Gas Analyzers - Part 2: Oxygen in Gas
(Utilizing High-Temperature Electrochemical Sensors) First Edition;
Corrigendum 05/1994
Gas Analyzers - Expression of Performance - Part 3: Paramagnetic
Oxygen Analyzers First Edition
Expression of Performance of Gas Analyzers - Part 6: Photometric
Analyzers First Edition; CENELEC EN 61207-6: 1994
Connecting Devices - Flat Quick-Connect Terminations for Electrical
Copper Conductors - Safety Requirements First Edition
Insulators of Ceramic Material or Glass for Overhead Lines with a
Nominal Voltage Greater Than 1 000 V - Puncture Testing First
Edition
Industrial Rigid Round Laminated Tubes and Rods Based on
Thermosetting Resins for Electrical Purposes - Part 2: Methods of
Test First Edition; CENELEC EN 61212-2: 1996
Maritime Navigation and Radiocommunication Equipment and
Systems - Integrated Bridge Systems (IBS) - Operational and
Performance Requirements, Methods of Testing and Required Test
Results First Edition
Industrial Rigid Round Laminated Tubes and Rods Based on
Thermosetting Resins for Electrical Purposes - Part 1: General
Requirements First Edition; CENELEC EN 61212-1: 1995
Industrial Rigid Round Laminated Tubes and Rods Based on
Thermosetting Resins for Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 1: Round Laminated Rolled Tubes
First Edition; CENELEC EN 61212-3-1: 1995
Industrial Rigid Round Laminated Tubes and Rods Based on
Thermosetting Resins for Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 2: Round Laminated Moulded Tubes
First Edition; BS EN 61212-3- 2: 1995; CENELEC EN 61212-3-2:
19
Industrial Rigid Round Laminated Tubes and Rods Based on
Thermosetting Resins for Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 3: Round Laminated Moulded Rods
First Edition; CENELEC EN 61212-3-3: 1995
Analogue Audio Recording on Video Tape - Polarity of
Magnetization First Edition; CENELEC EN 61213: 1994
Hand-Held Mains Voltage Operated Spray Guns - Performance
Requirements First Edition
Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design
Qualification and Type Approval First Edition; CENELEC EN
61215: 1995
61217
61219
61220
61221
61223-1
61223-2-1
61223-2-2
61223-2-3
61223-2-9
61223-2-10
61223-2-11
61223-2-4
61223-2-5
61223-2-6
61223-2-7
Radiotherapy Equipment - Coordinates, Movements and Scales First
Edition; Amendment 1: 12-2000
Live Working - Earthing or Earthing and Short-Circuiting Equipment
Using Lances as a Short-Circuiting Device - Lance Earthing First
Edition; CENELEC EN 61219: 1993; Corrigendum: 05-2000
Ultrasonics - Fields - Guidance for the Measurement and
Characterization of Ultrasonic Fields Generated by Medical
Ultrasonic Equipment Using Hydrophones in the Frequency Range
0,5 MHz to 15 MHz First Edition; (AS/NZS 4190: 1994)
Petroleum Products and Lubricants - Triaryl Phosphate Ester Turbine
Control Fluids (Category ISO-L-TCD) - Specifications First Edition;
CENELEC EN 61221: 1995
Evaluation and Routine Testing in Medical Imaging Departments Part 1: General Aspects First Edition; (AS/NZS 4184.1: 1994)
Evaluation and Routine Testing in Medical Imaging Departments Part 2-1: Constancy Tests - Film Processors First Edition; (AS/NZS
4184.2.1: 1994)
Evaluation and Routine Testing in Medical Imaging Departments Part 2-2: Constancy Tests - Radiographic Cassettes and Film
Changers - Film-Screen Contact and Relative Sensitivity of the
Screen-Cassette Assembly First Edition; AS/NZS 4184.2.2: 1994
Evaluation and Routine Testing in Medical Imaging Departments Part 2-3: Constancy Tests - Darkroom Safelight Conditions First
Edition; (AS/NZS 4184.2.3: 1994)
Evaluation and Routine Testing in Medical Imaging Departments Part 2-9: Constancy Tests - Equipment for Indirect Radioscopy and
Indirect Radiography First Edition
Evaluation and Routine Testing in Medical Imaging Departments Part 2-10: Constancy Tests - X-Ray Equipment for Mammography
First Edition
Evaluation and Routine Testing in Medical Imaging Departments Part 2-11: Constancy Tests - Equipment for General Direct
Radiography First Edition
Evaluation and Routine Testing in Medical Imaging Departments Part 2-4: Constancy Tests - Hard Copy Cameras First Edition;
(CENELEC EN 61223-2-4: 1994) (AS/NZS 4184.2.4: 1995)
Evaluation and Routine Testing in Medical Imaging Departments Part 2-5: Constancy Tests - Image Display Devices First Edition;
(CENELEC EN 61223-2-5: 1994) (AS/NZS 4184.2.5: 1995)
Evaluation and Routine Testing in Medical Imaging Departments Part 2-6: Constancy Tests - X-Ray Equipment for Computed
Tomography First Edition; (CENELEC EN 61223-2-6: 1994)
(AS/NZS 4184.2.6: 1995)
Evaluation and Routine Testing in Medical Imaging Departments Part 2-7: Constancy Tests - Equipment for Intra-Oral Dental
Radiography Excluding Dental Panoramic Equipment First Edition
61223-3-1
61223-3-2
61223-3-3
61223-3-4
61224
61225
61226
61227
61228
61229
61230
TS 61231
61232
61233
61234-1
61234-2
61235
61236
61237-1
61237-2
Evaluation and Routine Testing in Medical Imaging Departments Part 3-1: Acceptance Tests - Imaging Performance of X-Ray
Equipment for Radiographic and Radioscopic Systems First Edition
Evaluation and Routine Testing in Medical Imaging Departments Part 3-2: Acceptance Tests - Imaging Performance of Mammographic
X-Ray Equipment First Edition
Evaluation and Routine Testing in Medical Imaging Departments Part 3-3: Acceptance Tests - Imaging Performance of X-Ray
Equipment for Digital Subtraction Angiography (DSA) First Edition
Evaluation and Routine Testing in Medical Imaging Departments Part 3-4: Acceptance Tests - Imaging Performance of Dental X-Ray
Equipment First Edition
Nuclear Reactors - Response Time in Resistance Temperature
Detectors (RTD) - In Situ Measurements First Edition
Nuclear Power Plants - Instrumentation and Control Systems
Important for Safety - Requirements for Electrical Supplies First
Edition
Nuclear Power Plants - Instrumentation and Control Systems
Important for Safety - Classification First Edition
Nuclear Power Plants - Control Rooms - Operator Controls First
Edition
Method of Measuring and Specifying the UV-Radiation of Ultraviolet
Lamps Used for Sun-Tanning First Edition; (CENELEC EN 61228:
1994) (Amendment 1-1996)
Rigid Protective Covers for Live Working on a.c. Installations First
Edition; Amendment 1-1998; Corrigendum 05-2000
Live Working - Portable Equipment for Earthing or Earthing and
Short-Circuiting First Edition; Corrigendum: 03-1997; Corrigendum:
07-1999; Corrigendum: 05-2000; Corrigendum: 12-2000
International Lamp Coding System (ILCOS) Second Edition
Aluminium-Clad Steel Wires for Electrical Purposes First Edition
High-Voltage Alternating Current Circuit-Breakers - Inductive Load
Switching First Edition
Method of Test for the Hydrolytic Stability of Electrical Insulating
Materials Part 1: Plastic Films First Edition; (CENELEC EN 612341: 1994)
Electrical Insulating Materials - Methods of Test for the Hydrolytic
Stability - Part 2: Moulded Thermosets First Edition
Live Working - Insulating Hollow Tubes for Electrical Purposes First
Edition; Corrigendum: 03-1997; Corrigendum: 07-1999;
Corrigendum : 05 2000
Saddles, Pole Clamps (Stick Clamps) and Accessories for Live
Working First Edition; Corrigendum: 07-1999; Corrigendum 05-2000
Broadcast Video Tape Recorders - Methods of Measurement - Part 1:
Mechanical Measurements First Edition
Broadcast Video Tape Recorders - Methods of Measurement - Part 2:
61237-3
61237-4
61238-1
TR 61238-2
61241-2-2
61241-2-3
61241-3
61242
61243-1
61243-2
61286
61287-1
61288-1
61288-2
61289-1
61289-2
61290-1-1
Electrical Measurements of Analogue Composite Video Signals First
Edition; CENELEC EN 61237-2: 1995
Methods of Measurement for Broadcast Video Tape Recorders Part
3: Electrical Measurements for Analogue Component Video Signals
First Edition; Corrigendum-1995; CENELEC EN 61237-3: 1995
Broadcast Video Tape Recorders - Methods of Measurement - Part 4:
Analogue Audio Performance Measurements First Edition
Compression and Mechanical Connectors for Power Cables with
Copper or Aluminium Conductors Part 1: Test Methods and
Requirements First Edition; AS/NZS 4325.1: 1995
Compression and Mechanical Connectors for Power Cables with
Copper or Aluminium Conductors - Part 2: Terminal Lugs for Power
Cables to Fit Equipment up to and Including 1kV - Overall
Dimensions First Edition
Electrical Apparatus for Use in the Presence of Combustible Dust Part 2: Test Methods - Section 2: Method for Determining the
Electrical Resistivity of Dust in Layers First Edition; (Corrigendum1994) (CENELEC EN 61241-2-2: 1995)
Electrical Apparatus for Use in the Presence of Combustible Dust Part 2: Test Methods - Section 3: Method for Determining Minimum
Ignition Energy of Dust/Air Mixtures First Edition
Electrical Apparatus for Use in the Presence of Combustible Dust Part 3: Classification of Areas Where Combustible Dusts Are or May
Be Present First Edition
Electrical Accessories - Cable Reels for Household and Similar
Purposes First Edition
Live Working - Voltage Detectors - Part 1: Capacitive Type to Be
Used for Voltages Exceeding 1 kV a.c. First Edition; Amendment 1:
06-1997; Corrigendum: 07-1999; Corrigendum: 05-2000
Live Working - Voltage Detectors - Part 2: Resistive Type to Be
Used for Voltages of 1 kV to 36 kV a.c. Edition 1.1; Edition 1:1995
Consolidated with Amendment 1:1999
Information Technology Coded Graphic Character Set for Use in the
Preparation of Documents Used in Electrotechnology and for
Information Interchange Second Edition
Power Converters Installed on Board Rolling Stock Part 1:
Characteristics and Test Methods First Edition; Supersedes IEC 411,
411-1, 411-3, 411-4 and 411-5
Cardiac Defibrillators - Cardiac Defibrillators-Monitors - Part 1:
Operation First Edition
Cardiac Defibrillators - Cardiac Defibrillators-Monitors - Part 2:
Maintenance First Edition
High Frequency Surgical Equipment - Part 1: Operation First Edition
High Frequency Surgical Equipment - Part 2: Maintenance First
Edition
Optical Fibre Amplifiers - Basic Specification - Part 1-1: Test
61290-1-2
61290-1-3
61747-1
61747-2
61300-3-19
61300-3-20
61300-3-21
61300-3-22
61300-3-23
61557-5
61557-6
61557-7
61557-8
Methods for Gain Parameters - Optical Spectrum Analyzer First
Edition
Optical Fibre Amplifiers - Basic Specification - Part 1-2: Test
Methods for Gain Parameters - Electrical Spectrum Analyzer First
Edition
Optical Fibre Amplifiers - Basic Specification - Part 1-3: Test
Methods for Gain Parameters - Optical Power Meter First Edition
Liquid Crystal and Solid-State Display Devices - Part 1: Generic
Specification First Edition
Liquid Crystal and Solid-State Display Devices - Part 2: Liquid
Crystal Display Modules - Sectional Specification First Edition; QC
720300
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-19: Examinations and
Measurements - Polarization Dependence of Return Loss of a SingleMode Fibre Optic Component First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-20: Examinations and
Measurements - Directivity of Fibre Optic Branching Devices First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-21: Examinations and
Measurements - Switching Time and Bounce Time First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-22: Examinations and
Measurements - Ferrule Compression Force First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-23: Examination and
Measurements - Fibre Position Relative to Ferrule Endface First
Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 5: Resistance to Earth First
Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 6: Residual Current Devices
(RCD) in TT and TN Systems First Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testiong, Measuring or
Monitoring of Protective Measures - Part 7: Phase Sequence First
Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 8: Insulation Monitoring
Devices for IT Systems First Edition
61557-9
61557-10
61747-2-1
61747-3
61747-3-1
61747-5
61751
61754-1
61754-2
61754-3
61747-4
61753-1-1
61753-2-1
61753-2-3
61754-4
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 9: Equipment for Insulation
Fault Location in IT Systems First Edition
Electrical Safety in Low Voltage Distribution Systems up to 1000 V
a.c. and 1500 V d.c. - Equipment for Testing, Measuring or
Monitoring of Protective Measures - Part 10: Combined Measuring
Equipment for Testing, Measuring or Monitoring of Protective Measu
Liquid Crystal and Solid-State Display Devices - Part 2-1: Passive
Matrix Monochrome LCD Modules - Blank Detail Specification First
Edition; QC 720301
Liquid Crystal and Solid State Display Devices - Part 3: Sectional
Specification for Liquid Crystal Display (LCD) Cells First Edition;
QC 720200
Liquid Crystal and Solid-State Display Devices - Part 3-1: Liquid
Crystal Display (LCD) Cells - Blank Detail Specification First
Edition; QC 720201
Liquid Crystal and Solid-State Display Devices - Part 5:
Environmental, Endurance and Mechanical Test Methods First
Edition
Laser Modules Used for Telecommunication - Reliability Assessment
First Edition
Fibre Optic Connector Interfaces - Part 1: General and Guidance First
Edition
Fibre Optic Connector Interfaces - Part 2: Type BFOC/2,5 Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 3: Type LSA Connector
Family First Edition
Liquid Crystal and Solid-State Display Devices - Part 4: Liquid
Crystal Diaplay Modules and Cells - Essential Ratings and
Characteristics First Edition; Replaces Section Twelve of Chapter III
of IEC 60747-5: 1992
Fiber Optic Interconnecting Devices and Passive Components
Performance Standard - Part 1-1: General and Guidance Interconnecting Devices (Connectors) First Edition
Fiber Optic Interconnecting Devices and Passive Components
Performance Standard - Part 2-1: Fibre Optic Connectors Terminated
on Single-Mode Fibre for Category U - Uncontrolled Environment
First Edition
Fibre Optic Interconnecting Devices and Passive Components
Performance Standard - Part 2-3: Non-Connectorised Single-Mode
1xN and 2xN Non-Wavelength-Selective Branching Devices for
Category U - Uncontrolled Environment First Edition
Fibre Optic Connector Interfaces - Part 4: Type SC Connector Family
Edition 1.1; Edition 1:1997 Consolidated with Amendment 1:1999;
Amendment 2:02-2001
61754-5
61754-6
61754-7
61754-8
61754-9
61754-10
TS 61941
61942
61943
TS 61944
TS 61945
TR 61948-1
TR 61948-2
61950
61951-1
61951-2
61954
TR 61955
61243-3
61243-5
Fibre Optic Connector Interfaces - Part 5: Type MT Connector
Family First Edition
Fibre Optic Connector Interfaces - Part 6: Type MU Connector
Family First Edition; Corrigendum August 1997; Amendment 1:
January 2001
Fibre Optic Connector Interfaces - Part 7: Type MPO Connector
Family Edition 1.2; Consolidated with Amendments 1: 1999 and 2:
2000
Fibre Optic Connector Interfaces - Part 8: CF08 Connector Family
First Edition
Fibre Optic Connector Interfaces - Part 9: Type DS Connector Family
First Edition
Fibre Optic Connector Interfaces - Part 10: Type Mini-MPO
Connector Family First Edition
Optical Fibres - Polarization Mode Dispersion Measurement
Techniques for Single-Mode Optical Fibres First Edition
Live Working - Gloves and Mitts with Mechanical Protection First
Edition; Corrigendum: 05-2000
Integrated Circuits - Manufacturing Line Approval Application
Guideline First Edition; IECQ QC 211001
Integrated Circuits - Manufacturing Line Approval - Demonstration
Vehicles First Edition
Integrated Circuits - Manufacturing Line Approval - Methodology for
Technology and Failure Analysis First Edition
Nuclear Medicine Instrumentation - Routine Tests - Part 1: Radiation
Counting Systems First Edition
Nuclear Medicine Instrumentation - Routine Tests - Part 2:
Scintillation Cameras and Single Photon Emission Computed
Tomography Imaging First Edition
Cable Management Systems - Specification for Conduit Fittings for
Electrical Installations for Extra-Heavy Duty Metal Conduit First
Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Portable Sealed Rechargeable Single Cells - Part 1
Nickel-Cadmium First Edition
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Portable Sealed Rechargeable Single Cells - Part 2
Nickel-Metal Hydride First Edition
Power Electronics for Electrical Transmission and Distribution
Systems - Testing of Thyristor Valves for Static VAR Compensators
First Edition; Amendment: 12/1999
Primary Batteries - Summary of Research and Actions Limiting Risks
to Reversed Installation of Primary Batteries First Edition
Live Working - Voltage Detectors - Part 3: Two-Pole Low-Voltage
Type First Edition; Corrigendum: 05-2000; Corrigendum: 12-2000
Live Working - Voltage Detectors - Part 5: Voltage Detecting
61244-1
TR 61244-2
TR 61244-3
61245
61246
61247
61248-1
61248-2
61248-3
61248-4
61248-5
61248-6
61248-7
61249-2-12
Systems (VDS) First Edition
Determination of Long-Term Radiation Ageing in Polymers Part 1:
Techniques for Monitoring Diffusion-Limited Oxidation First Edition
Determination of Long-Term Radiation Ageing in Polymers - Part 2:
Procedures for Predicting Ageing at Low Dose Rates First Edition
Long-Term Radiation Ageing in Polymers - Part 3: Procedures for InService Monitoring of Low-Voltage Cable Materials First Edition
Artificial Pollution Tests on High-Voltage Insulators to Be Used on
D.C. Systems First Edition
Magnetic Oxide Cores (E-Cores) of Rectangular Cross-Section and
Associated Parts - Dimensions First Edition
PM-Cores Made of Magnetic Oxides and Associated Parts Dimensions First Edition
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 1: Generic Specification First
Edition; (IECQ QC 260000)
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 2: Sectional Specification for
Signal Transformers on the Basis of the Capability Approval
Procedure First Edition; (IECQ QC 260100)
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 3: Sectional Specification for
Power Transformers on the Basis of the Capability Approval
Procedure First Edition; (IECQ QC 260200)
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 4: Sectional Specification for
Power Transformers for Switched Mode Power Supplies (SMPS) on
the Basis of the Capability Approval Procedure First Edition; IECQ
QC 26030
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 5: Sectional Specification for
Pulse Transformers on the Basis of the Capability Approval
Procedure First Edition; IECQ QC 260400
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 6: Sectional Specification for
Inductors on the Basis of the Capability Approval Procedure First
Edition; IECQ QC 260500
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Part 7: Sectional Specification for
High-Frequency Inductors and Intermediate Frequency Transformers
on the Basis of the Capability Approval Procedure First Edition; QC
2606
Materials for Printed Boards and Other Interconnecting Structures Part 2-12: Sectional Specification Set for Reinforced Base Materials,
Clad and Unclad - Epoxide Non-Woven Aramid Laminate of Defined
Flammability, Copper-Clad First Edition
61249-2-13
61249-8-7
61250
61251
61249-3-3
61249-3-4
61249-3-5
61249-5-1
61249-5-4
61249-7-1
61249-8-8
61252
61253-1
61253-2
Materials for Printed Boards and Other Interconnecting Structures Part 2-13: Sectional Specification Set for Reinforced Base Materials,
Clad and Unclad - Cyanate Ester Non-Woven Aramid Laminate of
Defined Flammability, Copper-Clad First Edition
Materials for Interconnection Structures - Part 8: Sectional
Specification Set for Non-Conductive Films and Coatings - Section 7:
Marking Legend Inks First Edition
Nuclear Reactors - Instrumentation and Control Systems Important
for Safety - Detection of Leakage in Coolant Systems First Edition
Electrical Insulating Materials - A.C. Voltage Endurance Evaluation Introduction First Edition
Materials for Printed Boards and Other Interconnecting Structures Part 3-3: Sectional Specification Set for Unreinforced Base Materials,
Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive
Coated Flexible Polyester Film First Edition
Materials for Printed Boards and Other Interconnecting Structures Part 3-4: Sectional Specification Set for Unreinforced Base Materials,
Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive
Coated Flexible Polyimide Film First Edition
Materials for Printed Boards and Other Interconnecting Structures Part 3-5: Sectional Specification Set for Unreinforced Base Materials,
Clad and Unclad (Intended for Flexible Printed Boards) - Transfer
Adhesive Films First Edition
Materials for Interconnection Structures - Part 5: Sectional
Specification Set for Conductive Foils and Films with and without
Coatings - Section 1: Copper Foils (for the Manufacture of CopperClad Base Materials) First Edition; CENELEC EN 61249-5-1: 1996;
Materials for Interconnection Structures - Part 5: Sectional
Specification Set for Conductive Foils and Films with and without
Coatings - Section 4: Conductive Inks First Edition
Materials for Interconnection Structures - Part 7: Sectional
Specification Set for Restraining Core Materials - Section 1:
Copper/Invar/Copper First Edition; CENELEC EN 61249-7-1: 1995
Materials for Interconnection Structures - Part 8: Sectional
Specification Set for Non-Conductive Films and Coatings - Section 8:
Temporary Polymer Coatings First Edition
Electroacoustics - Specifications for Personal Sound Exposure Meters
First Edition; CENELEC EN 61 252: 1995; Amendment 1: 10/2000
Piezoelectric Ceramic Resonators - A Specification in the IEC
Quality Assessment System for Electronic Components (IECQ) Part
1: Generic Specification - Qualification Approval First Edition;
(IECQ QC 670000)
Piezoelectric Ceramic Resonators - A Specification in the IEC
Quality Assessment System for Electronic Components (IECQ) Part
2: Sectional Specification - Qualification Approval First Edition;
(IECQ QC 670100)
61253-2-1
61254
61255
61256
61258
61260
61263
61264
61267
61259
61261-1
61261-2
61261-2-1
61262-1
61262-2
61262-3
Piezoelectric Ceramic Resonators - A Specification in the IEC
Quality Assessment System for Electronic Components (IECQ) Part
2: Sectional Specification - Qualification Approval Section 1: Blank
Detail Specification - Assessment Level E; First Edition
Electric Shavers for Household Use - Methods for Measuring the
Performance First Edition; CENELEC EN 61254: 1994
Household Electric Heating Pads - Methods for Measuring
Performance First Edition; (EN 61255:1994)
Radiation Protection Instrumentation - Installed Monitors for the
Detection of Radioactive Contamination of Laundry First Edition
Guidelines for the Development and Use of Medical Electrical
Equipment Educational Materials First Edition
Electroacoustics - Octave-Band and Fractional-Octave-Band Filters
First Edition; CENELEC EN 61 260: 1995; Supersedes IEC 60225:
1966
Radiation Protection Instrumentation - Portable Potential Alpha
Energy Meter for Rapid Measurements in Mines First Edition
Ceramic Pressurized Hollow Insulators for High-Voltage Switchgear
and Controlgear Second Edition
Medical Diagnostic X-Ray Equipment - Radiation Conditions for Use
in the Determination of Characteristics First Edition; (CENELEC EN
61267: 1996) (SNZ AS/NZS 4358: 1996)
Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages 72,5
kV and Above - Requirements for Switching of Bus-Charging
Currents by Disconnectors First Edition; CENELEC EN 61259: 1994
Piezoelectric Ceramic Filters for Use in Electronic Equipment - A
Specification in the IEC Quality Assessment System for Electronic
Components (IECQ) Part 1: Generic Specification - Qualification
Approval First Edition; (IECQ QC 660000)
Piezoelectric Ceramic Filters for Use in Electronic Equipment - A
Specification in the IEC Quality Assessment System for Electronic
Components (IECQ) Part 2: Sectional Specification - Qualification
Approval First Edition; (IECQ QC 660100)
Piezoelectric Ceramic Filters for Use in Electronic Equipment - A
Specification in the IEC Quality Assessment System for Electronic
Components (IECQ) Part 2: Sectional Specification - Qualification
Approval Section 1: Blank Detail Specification - Assessmen
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 1: Determination of the Entrance Field
Size First Edition; (CEN EN 61262-1: 1994) (AS/NZS 4356.1: 1996)
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 2: Determination of the Conversion
Factor First Edition; CENELEC EN 61262-2: 1994; AS/NZS 4356.2:
1996
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 3: Determination of Luminance
61262-4
61262-5
61262-6
61262-7
61265
61266
61268
61269-1-1
61270-1
61274-1
61274-1-1
61275
61276
61277
TR 61278
61280-1-1
Distribution and Luminance Non-Uniformity First Edition;
(CENELEC EN 61262-3: 1994) (AS/NZS 4356.3: 1996)
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 4: Determination of the Image
Distortion First Edition; (CENELEC EN 61262-4: 1994) (AS/NZS
4356.4: 1996)
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 5: Determination of the Detective
Quantum Efficiency First Edition; (CENELEC EN 61262-5: 1994)
(AS/NZS 4356.5: 1996)
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 6: Determination of the Contrast Ratio
and Veiling Glare Index First Edition; (CENELEC EN 61262-6:
1994) (AS/NZS 4356.3: 1996)
Medical Electrical Equipment - Characteristics of Electro-Optical XRay Image Intensifiers - Part 7: Determination of the Modulation
Transfer Function First Edition; (CENELEC EN 61 262-7: 1995)
Electroacoustics - Instruments for Measurement of Aircraft Noise Performance Requirements for Systems to Measure One-ThirdOctave Band Sound Pressure Levels in Noise Certification of
Transport-Category Aeroplanes First Edition; Corrigendum-1995;
Supersed
Ultrasonics - Hand-Held Probe Doppler Foetal Heartbeat Detectors Performance Requirements and Methods of Measurement and
Reporting First Edition (CENELEC EN 61266: 1995) (AS/NZS
4374:1996)
Alternating Current Static Var-Hour Meters for Reactive Energy
(Classes 2 and 3) First Edition CENELEC EN 61 268: 1996
Fibre Optic Terminus Sets - Part 1-1: Blank Detail Specification First
Edition; (IECQ QC 780001)
Capacitors for Microwave Ovens - Part 1: General First Edition
Fibre Optic Adaptors Part 1: Generic Specification First Edition;
(IECQ QC 860000)
Fibre Optic Adaptors Part 1-1: Blank Detail Specification First
Edition; (IECQ QC 860001)
Radiation Protection Instrumentation - Measurement of Discrete
Radionuclides in the Environment - In Situ Photon Spectrometry
System Using a Germanium Detector First Edition
Nuclear Instrumentation - Guidelines for Selection of Metrologically
Supported Nuclear Radiation Spectrometry Systems First Edition
Terrestrial Photovoltaic (PV) Power Generating Systems - General
and Guide First Edition
Live Working - Guidelines for Dielectric Testing of Tools and
Equipment First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
1-1: Test Procedures for General Communication Subsystems -
61280-1-3
61280-2-1
61280-2-2
61280-2-4
61280-2-5
61280-4-2
61281-1
TR 61282-1
61283
61284
61285
61290-2-1
61290-2-2
61290-2-3
61290-5-1
61290-7-1
Transmitter Output Optical Power Measurement for Single-Mode
Optical Fibre Cable First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
1-3: Test Procedures for General Communication Subsystems Central Wavelength and Spectral Width Measurement First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
2-1: Test Procedures for Digital Systems - Receiver Sensitivity and
Overload Measurement First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
2-2: Test Procedures for Digital Systems - Optical Eye Pattern,
Waveform, and Extinction Ratio First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
2-4: Test Procedures for Digital Systems - Bit-Rate Tolerance
Measurement First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
2-5: Test Procedures for Digital Systems - Jitter Transfer Function
Measurement First Edition
Fibre Optic Communication Subsystem Basic Test Procedures - Part
4-2: Fibre Optic Cable Plant - Single-Mode Fibre Optic Cable Plant
Attenuation First Edition
Fibre Optic Communication Subsystems - Part 1: Generic
Specification First Edition
Fibre Optic Communication System Design Guides - Part 1: SingleMode Digital and Analogue Systems First Edition
Radiation Protection Instrumentation - Direct Reading Personal Dose
Equivalent (Rate) Monitors - X, Gamma and High Energy Beta
Radiation First Edition
Overhead Lines - Requirements and Tests for Fittings Second
Edition; Corrigendum-1998
Industrial-Process Control - Safety of Analyser Houses First Edition;
Corrigendum-1994; CENELEC EN 61285: 1994
Optical Fibre Amplifiers - Basic Specification - Part 2-1: Test
Methods for Optical Power Parameters - Optical Spectrum Analyzer
First Edition
Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test
Methods for Optical Power Parameters - Electrical Spectrum
Analyzer First Edition; It Shall be Read in Conjunction with IEC
61291-1
Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test
Methods for Optical Power Parameters - Optical Power Meter First
Edition; It Shall be Read in Conjunction with IEC 61291-1
Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test
Methods for Reflectance Parameters - Optical Spectrum Analyser
First Edition
Optical Fibre Amplifiers - Basic Specification - Part 7-1: Test
Methods for Out-of-Band Insertion Losses - Filtered Optical Power
61291-1
61290-6-1
61291-2
TR 61292-1
61293
61294
61295
61297
61298-1
61298-2
61298-3
61298-4
61300-1
61300-2-1
61300-2-2
61300-2-3
61300-2-4
61300-2-5
Meter First Edition
Optical Fibre Amplifiers - Part 1: Generic Specification First Edition
Optical Fibre Amplifiers - Basic Specification - Part 6-1: Test
Methods for Pump Leakage Parameters - Optical Demultiplexer First
Edition; It Shall be Read in Conjunction with IEC 61291-1
Optical Fibre Amplifiers - Part 2: Digital Applications - Performance
Specification Template First Edition
Fibre Optics - Parameters of Amplifier Components First Edition
Marking of Electrical Equipment with Ratings Related to Electrical
Supply - Safety Requirements First Edition; CENELEC EN 61293:
1994
Insulating Liquids - Determination of the Partial Discharge Inception
Voltage (PDIV) - Test Procedure First Edition
Calibration Tapes for Broadcast VTRs First Edition
Industrial-Process Control Systems - Classification of Adaptive
Controllers for the Purpose of Evaluation First Edition; CENELEC
EN 61 297: 1995
Process Measurement and Control Devices - General Methods and
Procedures for Evaluating Performance - Part 1: General
Considerations First Edition; CENELEC EN 61 298-1: 1995
Process Measurement and Control Devices - General Methods and
Procedures for Evaluating Performance - Part 2: Tests under
Reference Conditions First Edition; CENELEC EN 61298-2: 1995
Process Measurement and Control Devices - General Methods and
Procedures for Evaluating Performance - Part 3: Tests for the Effects
of Influence Quantities First Edition
Process Measurement and Control Devices - General Methods and
Procedures for Evaluating Performance - Part 4: Evaluation Report
Content First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 1: General and Guidance
First Edition; (Corrigendum-1995)
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-1: Tests - Vibration
(Sinusoidal) First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-2: Tests - Mating
Durability First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-3: Tests - Static Shear
Load First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-4: Tests - Fibre/Cable
Retention First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-5: Tests - Torsion/Twist
61300-2-6
61300-2-7
61300-2-8
61300-2-9
61300-2-10
61300-2-11
61300-2-12
61300-2-13
61300-2-14
61300-2-15
61300-2-16
61300-2-17
61300-2-18
61300-2-19
61300-2-21
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-6: Tests - Tensile Strength
of Coupling Mechanism First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-7: Tests - Bending
Moment First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-8: Tests - Bump First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-9: Tests - Shock First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-10: Tests - Crush
Resistance First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-11: Tests - Axial
Compression First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-12: Tests - Impact First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-13: Tests - Acceleration
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-14: Tests - Maximum
Input Power First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-15: Tests - Torque
Strength of Coupling Mechanism First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-16: Tests - Mould Growth
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-17: Tests - Cold First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-18: Tests - Dry Heat High Temperature Endurance First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-19: Tests - Damp Heat
(Steady State) First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-21: Tests - Composite
Temperature-Humidity Cyclic Test First Edition
61300-2-22
61300-2-23
61300-2-24
61300-2-25
61300-2-26
61300-2-27
61300-2-28
61300-2-29
61300-2-30
61300-2-31
61300-2-32
61300-2-33
61300-2-34
61300-2-35
61300-2-36
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-22: Tests - Change of
Temperature First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-23: Tests - Sealing for
Non-Pressurized Closures of Fibre Optic Devices First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-24: Tests - Screen Testing
of Ceramic Alignment Split Sleeve by Stress Application First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-25: Tests - Sealing
Endurance for Closures First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-26: Tests - Salt Mist First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-27: Tests - Dust - Laminar
Flow First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-28: Tests - Industrial
Atmosphere (Sulphur Dioxide) First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-29: Tests - Low Air
Pressure First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-30: Tests - Solar Radiation
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-31: Tests - Nuclear
Radiation First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-32: Tests - Water Vapour
Permeation First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-33: Tests - Assembly and
Disassembly of Closures First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-34: Tests - Resistance to
Solvents and Contaminating Fluids First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-35: Tests - Cable Notation
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-36: Tests - Flammability
(Fire Hazard) First Edition
61300-2-37
61300-2-38
61300-2-39
61300-2-40
61300-2-41
61300-2-42
61300-2-43
61300-2-45
61300-3-1
61300-3-2
61301
61302
61303
61304
61300-3-3
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-37: Tests - Cable Bending
for Closures First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-38: Tests - Sealing for
Pressurized Closures of Fibre Optic Devices First Edition
Fiber Optic Interconnecting Devices and Passive Components - Basic
Test Measurement Procedures - Part 2-39: Tests - Susceptibility to
External Magnetic Fields First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-40: Tests - Screen Testing
of Attenuation of Single-Mode Tuned Angled Optical Connectors
First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-41: Tests - Screen Testing
of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre
Connectors First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 2-42: Tests - Static Side
Load for Connectors First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Mesurement Procedures - Part 2-43: Tests - Screen Testing
of Return Loss of Single Mode PC Optical Fibre Connectors First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Mesurement Procedures - Part 2-45: Tests - Durability Test
by Water Immersion First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-1: Examinations and
Measurements - Visual Examination First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-2: Examinations and
Measurements - Polarization Dependence of Attenuation in a SingleMode Fibre Optic Device Second Edition
Nuclear Instrumentation - Digital Bus for NIM Instruments First
Edition
Electrical Insulating Materials - Method to Evaluate the Resistance to
Tracking and Erosion - Rotating Wheel Dip Test First Edition;
Corrigendum-1995; CENELEC EN 1302: 1995
Medical Electrical Equipment - Radionuclide Calibrators - Particular
Methods for Describing Performance First Edition; (AS/NZS 4354:
1995)
Nuclear Instrumentation - Liquid-Scintillation Counting Systems Performance Verification First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-3: Examinations and
61300-3-4
61300-3-5
61300-3-6
61300-3-7
61300-3-8
61300-3-9
61300-3-10
61300-3-11
61300-3-12
61300-3-13
61300-3-14
61300-3-15
61300-3-16
Measurements - Monitoring Change in Attenuation and in Return
Loss (Multiple Paths) First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-4: Examination and
Measurements - Attenuation Second Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-5: Examinations and
Measurements - Wavelength Dependence of Attenuation First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-6: Examinations and
Measurements - Return Loss Edition 1.2; Edition 1:1997
Consolidated with Amendments 1:1998 and 2:1999
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-7: Examinations and
Measurements - Wavelength Dependence of Attenuation and Return
Loss First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-8: Examinations and
Measurements - Ambient Light Susceptibility First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-9: Examinations and
Measurements - Far-End Crosstalk First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-10: Examinations and
Measurements - Gauge Retention Force First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-11: Examinations and
Measurements - Engagement and Separation Forces First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-12: Examinations and
Measurements - Polarization Dependence of Attenuation of a SingleMode Fibre Optic Component: Matrix Calculation Method First E
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-13: Examinations and
Measurements - Control Stability of a Fibre Optic Switch First
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-14: Examinations and
Measurements - Accuracy and Repeatability of the Attenuation
Settings of a Variable Attenuator First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-15: Measurements Eccentricity of a Convex Polished Ferrule Endface First Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-16: Examinations and
Measurements - Endface Radius of Spherically Polished Ferrules
61305-1
61305-2
61305-3
61300-3-17
61300-3-18
61300-3-24
61019-1-1
61020-2
61020-2-1
61020-2-2
61020-3
61020-3-1
61020-3-2
61020-4
First Edition
Household High-Fidelity Audio Equipment and Systems - Methods
of Measuring and Specifying the Performance - Part 1: General First
Edition; CENELEC EN 61305-1: 1995
Household High-Fidelity Audio Equipment and Systems - Methods
of Measuring and Specifying the Performance - Part 2: FM Radio
Tuners First Edition
Household High-Fidelity Audio Equipment and Systems - Methods
of Measuring and Specifying the Performance - Part 3: Amplifiers
First Edition; CENELEC EN 61305-3: 1995
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-17: Examinations and
Measurements - Endface Angle of Angle-Polished Ferrules Second
Edition
Fibre Optic Interconnecting Devices and Passive Components - Basic
Test and Measurement Procedures - Part 3-18: Examinations and
Measurements - Keying Accuracy of an Angled Endface Connector
First Edition
Fibre Optic Interconnecting Devices And Passive Components Basic Test And Measurement Procedures - Part 3-24: Examinations
And Measurements - Keying Accuracy Of Optical Connectors For
Polarization Maintaining Fibre First Edition; Premiere Edition
Surface Acoustic Wave (SAW) Resonators Part 1: General
Information, Standard Values and Test Conditions Section 1 General Information and Standard Values First Edition
Electromechanical Switches for Use in Electronic Equipment Part 2:
Sectional Specification for Rotary Switches; First Edition; (IECQ QC
960100)
Electromechanical Switches for Use in Electronic Equipment Part 2:
Sectional Specification for Rotary Switches Section 1 - Blank Detail
Specification First Edition; (IECQ QC 960101)
Electromechanical Switches for Use in Electronic Equipment - Part 2:
Sectional Specification for Rotary Switches - Section 2: Detail
Specification for Rotary Switches with Central Mounting, 12
Positions, 17 mm Diameter First Edition; IECQ QC 960101XX0001
Electromechanical Switches for Use in Electronic Equipment Part 3:
Sectional Specification for In-Line Package Switches First Edition;
(IECQ QC 960500)
Electromechanical Switches for Use in Electronic Equipment Part 3:
Sectional Specification for In-Line Package Switches Section 1 Blank Detail Specification First Edition; IECQ QC 960501
Electromechanical Switches for Use in Electronic Equipment Part 3:
Sectional Specification for In-Line Package Switches Section 2:
Detail Specification for Dual In-Line Package (DIP), Switches,
Raised and Recessed Rocker Actuated First Edition; IECQ QC 960
Electromechanical Switches for Use in Electronic Equipment Part 4:
61020-4-1
61020-4-2
61020-5
61021-1
61022
61024-1
61025
61020-5-1
61020-6
61020-6-1
61020-6-2
61021-2
61023
61024-1-1
61024-1-2
Sectional Specification for Lever (Toggle) Switches First Edition;
(IECQ QC 960200)
Electromechanical Switches for Use in Electronic Equipment Part 4:
Sectional Specification for Lever (Toggle) Switches Section 1 Blank Detail Specification First Edition; (IECQ QC 960201)
Electromechanical Switches for Use in Electrical Equipment - Part 4:
Sectional Specification for Lever (Toggle) Switches Section 2: Detail
Specification for One Pole, Two Pole, Four Pole, Sealed Lever
(Toggle) Switches, 277 V A.C. Maximum, 30 V D.C. Maximu
Electromechanical Switches for Use in Electronic Equipment Part 5:
Sectional Specification for Pushbutton Switches First Edition; (IECQ
QC 960400)
Laminated Core Packages for Transformers and Inductors Used in
Telecommunication and Electronic Equipment Part 1: Dimensions
First Edition
Interconnection of Radio and TV Receivers to Feeder System Outlets
First Edition
Protection of Structures Against Lightning Part 1: General Principles
First Edition; CENELEC ENV 61024-1: 1995
Fault Tree Analysis (FTA) First Edition
Electromechanical Switches for Use in Electronic Equipment Part 5:
Sectional Specification for Pushbutton Switches Section 1 - Blank
Detail Specification First Edition; (IECQ QC 960401)
Electromechanical Switches for Use in Electronic Equipment Part 6:
Sectional Specification for Sensitive Switches First Edition; Together
with 61020-6-1: 1991, it Replaces 60163-1: 1984; QC 960300
Electromechanical Switches for Use in Electronic Equipment Part 6:
Sectional Specification for Sensitive Switches Section 1 - Blank
Detail Specification First Edition; Together with 61020-6: 1991, it
Replaces 60163-1: 1984; QC 960301
Electromechanical Switches for Use in Electronic Equipment - Part 6:
Sectional Specification for Sensitive Switches - Section 2: Detail
Specification for One Pole, Unsealed Subminiature Sensitive
Switches, 250 V Maximum Electrical Rating First Edition; (IE
Laminated Core Packages for Transformers and Inductors for Use in
Telecommunication and Electronic Equipment - Part 2: Electrical
Characteristics for Cores Using YEE 2 Laminations First Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - Marine Speed and Distance Measuring Equipment
(SDME) - Performance Requirements - Methods of Testing and
Required Test Results Second Edition
Protection of Structures Against Lightning Part 1: General Principles
Section 1: Guide A - Selection of Protection Levels for Lightning
Protection Systems First Edition
Protection of Structures Against Lightning Part 1-2: General
Principles - Guide B - Design, Installation, Maintenance and
61026
61027
61028
61029-1
61029-2-1
61029-2-2
61029-2-3
61029-2-4
61029-2-5
61029-2-6
61029-2-7
61029-2-8
61029-2-9
61029-2-10
61029-2-11
61030
61031
Inspection of Lightning Protection Systems First Edition
Guidelines for Application of Analytical Test Methods for Thermal
Endurance Testing of Electrical Insulating Materials First Edition
Instruments for the Measurement of Aural Acoustic Impedance/
Admittance First Edition; (CENELEC EN 61027:1993)
Electrical Measuring Instruments - X-Y Recorders First Edition;
Amendment 1-1995; Amendment 2-1997
Safety of Transportable Motor-Operated Electric Tools Part 1:
General Requirements First Edition; CAN/CSA-IEC E1029-1-94;
CENELEC EN 61029-1: 1995
Safety of Transportable Motor-Operated Electric Tools - Part 2-1:
Particular Requirements for Circular Saws First Edition; Amendment
1: 02-1999; Amendment 2: 05-2001
Safety of Transportable Motor-Operated Electric Tools Part 2:
Particular Requirements for Radial Arm Saws First Edition;
CAN/CSA-IEC E1029-2-2-94
Safety of Transportable Motor-Operated Electric Tools Part 2:
Particular Requirements for Planers and Thicknessers First Edition;
CAN/CSA-IEC E1029-2-3-94
Safety of Transportable Motor-Operated Electric Tools - Part 2-4:
Particular Requirements for Bench Grinders First Edition;
Amendment 1: 05-2001
Safety of Transportable Motor-Operated Electric Tools Part 2:
Particular Requirements for Band Saws First Edition; CAN/CSA-IEC
E1029-2-5-94
Safety of Transportable Motor-Operated Electric Tools Part 2:
Particular Requirements for Diamond Drills with Water Supply First
Edition; CAN/CSA-IEC E1029-2-6-94
Safety of Transportable Motor-Operated Electric Tools Part 2:
Particular Requirements for Diamond Saws with Water Supply First
Edition; CAN/CSA-IEC E1029-2-7-94
Safety of Transportable Motor-Operated Electric Tools - Part 2-8:
Particular Requirements for Single Spindle Vertical Moulders First
Edition; Amendment 2: 05-2001
Safety of Transportable Motor-Operated Electric Tools Part 2:
Particular Requirements for Mitre Saws First Edition
Safety of Transportable Motor-Operated Electric Tools - Part 2-10:
Particular Requirements for Cutting-Off Grinders First Edition; To be
Used in Conjunction with the IEC 61029-1
Safety of Transportable Motor-Operated Electric Tools - Part 2-11:
Particular Requirements for Mitre-Bench Saws First Edition
Audio, Video and Audiovisual Systems Domestic Digital Bus (D2B)
First Edition; Amendment 1-1993; CENELEC EN 61030: 1993
Design, Location and Application Criteria for Installed Area Gamma
Radiation Dose Rate Monitoring Equipment for Use in Nuclear
Power Plants During Normal Operation and Anticipated Operational
61032
61033
61034-1
61034-2
61035-1
61035-2-1
61035-2-2
61035-2-3
61035-2-4
61036
61037
61038
61039
61040
61041-2
61041-3
61041-1
Occurrences First Edition
Protection of Persons and Equipment by Enclosures - Probes for
Verification Second Edition
Test Methods for the Determination of Bond Strength of
Impregnating Agents to an Enamelled Wire Substrate First Edition;
Replaces IEC 60290: 1969 and IEC 60699: 1981
Measurement of Smoke Density of Cables Burning Under Defined
Conditions - Part 1: Test Apparatus Second Edition
Measurement of Smoke Density of Electric Cables Burning under
Defined Conditions - Part 2: Test Procedure and Requirements
Second Edition
Specification for Conduit Fittings for Electrical Installations Part 1:
General Requirements First Edition
Specification for Conduit Fittings for Electrical Installations - Part 2:
Particular Specifications - Section 1: Metal Conduit Fittings First
Edition
Specification for Conduit Fittings for Electrical Installations - Part 2:
Particular Specifications - Section 2: Conduit Fittings of Insulating
Material First Edition
Specification for Conduit Fittings for Electrical Installations Part 2:
Particular Specifications Section 3: Fittings for Flexible Conduits of
Metal, Insulating or Composite Materials and for Pliable Conduits of
Metal or Composite Materials First Edition
Specification for Conduit Fittings for Electrical Installations Part 2:
Particular Specifications Section 4: Conduit Fittings of Aluminium
Alloy First Edition
Alternating Current Static Watt-Hour Meters for Active Energy
(Classes 1 and 2) Edition 2:1 1996 Consolidated with Amendment
1:2000
Electricity Metering - Tariff and Load Control - Particular
Requirements for Electronic Ripple Control Receivers Edition 1.2:
Edition 1: 1990 Consolidated with Amendments 1: 1996 and 2: 1998
Electricity Metering - Tariff and Load Control - Particular
Requirements for Time Switches Edition 1.2; Consolidated with
Amendments 1: 1996 and 2: 1998
General Classification of Insulating Liquids First Edition
Power and Energy Measuring Detectors, Instruments and Equipment
for Laser Radiation First Edition; CENELEC EN 61040: 1992
Non-Broadcast Video Tape Recorders - Methods of Measurement Part 2: Video Characteristics Chrominance SECAM First Edition;
CENELEC EN 61 041-2: 1996
Non-Broadcast Videotape Recorders - Methods of Measurement Part 3: Audio Characteristics for FM Recording First Edition
(CENELEC EN 61041-3: 1995)
Non-Broadcast Video Tape Recorders - Methods of Measurement
Part 1: General Video (NTSC/PAL) and Audio (Longitudinal)
61041-4
61041-5
61043
61044
61045-1
61045-2
61045-2-1
61047
61048
61049
61050
61051-1
61051-2
61051-2-2
61052
61053-1
Characteristics First Edition (CENELEC EN 61041-1: 1995)
Non-Broadcast Video Tape Recorders - Methods of Measurement Part 4: Calibration Tape (NTSC/PAL/SECAM) First Edition
Non-Broadcast Video Tape Recorders - Methods of Measurement Part 5: High-Band Video Tape Recorders, Including Those Equipped
with Y/C Video Connectors (NTSC/PAL) First Edition
Electroacoustics - Instruments for the Measurement of Sound
Intensity - Measurement with Pairs of Pressure Sensing Microphones
First Edition; (CENELEC EN 61043:1994)
Opportunity-Charging of Lead-Acid Traction Batteries First Edition
Fixed Film Resistor Networks for Use in Electronic Equipment Part
1: Generic Specification First Edition; (IECQ QC 390000)
Fixed Film Resistor Networks for Use in Electronic Equipment Part
2: Sectional Specification for Film Resistor Networks of Assessed
Quality on the Basis of the Capability Approval Procedure First
Edition; (IECQ QC 390100)
Fixed Film Resistor Networks for Use in Electronic Equipment Part
2: Blank Detail Specification for Film Resistor Networks of Assessed
Quality on the Basis of the Capability Approval Procedure
Assessment Level E First Edition; (IECQ QC 390101)
D.C. or A.C. Supplied Electronic Step-Down Convertors for Filament
Lamps - Performance Requirements Edition 1.2; Edition 1:1991
Consolidated with Amendments 1:1996 and 2:2001
Auxiliaries for Lamps - Capacitors for Use in Tubular Fluorescent
and Other Discharge Lamp Circuits - General and Safety
Requirements Edition 1.2; Edition 1: 1991 Consolidated with
Amendments 1: 1995 and 2: 1999
Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp
Circuits Performance Requirements First Edition; CENELEC EN
61049: 1993
Transformers for Tubular Discharge Lamps Having a No-Load
Output Voltage Exceeding 1 000 V (Generally Called NeonTransformers) General and Safety Requirements First Edition;
Corrigendum 03/1992; Amendment 1-1994
Varistors for Use in Electronic Equipment Part 1: Generic
Specification First Edition; IECQ QC 420000
Varistors for Use in Electronic Equipment Part 2: Sectional
Specification for Surge Suppression Varistors First Edition; (IECQ
QC 420100)
Varistors for Use in Electronic Equipment Part 2: Blank Detail
Specification for Zinc Oxide Surge Suppression Varistors Assessment Level E First Edition; (IECQ QC 420102)
IEC 1052 FASTBUS STANDARD ROUTINES Standard Routines
for Use with FASTBUS Data Acquisition System First Edition
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape on Type Beta Format - FM Audio Recording Part 1:
61053-2
61055-2
61056-2
61056-3
61055-1
61056-1
61057
61058-1
61058-2-1
61058-2-4
61058-2-5
61061-1
61061-2
61061-3-1
61061-3-2
61063
61064
625 Line-50 Field Systems First Edition
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape on Type Beta Format - FM Audio Recording Part 2:
525 Line-60 Field Systems First Edition
Measurement Techniques and Operational Adjustments of Broadcast
VTRs Part 2: Special Mechanical Measurements and Alignments
First Edition; Replaces IEC 60698: 1981
Portable Lead-Acid Cells and Batteries (Valve-Regulated Types)Part 2: Dimensions, Terminals and Marking First Edition
Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part
3: Safety Recommendations for Use in Electric Appliances First
Edition
Measurement Techniques and Operational Adjustments of Broadcast
VTRs Part 1: Operational Adjustments on Analogue Composite
Broadcast VTRs First Edition; Replaces IEC 60698: 1981
Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part
1: General Requirements, Functional Characteristics - Methods of
Test First Edition; CENELEC EN 61056-1: 1993
Aerial Devices with Insulating Boom Used for Live Working First
Edition; Corrigendum: 07-1999
Switches for Appliances - Part 1: General Requirements Third
Edition; Amendment 1:8-2001
Switches for Appliances Part 2-1: Particular Requirements for Cord
Switches First Edition; (CENELEC EN 61058-2-1: 1993)
(Amendment 1-1995)
Switches for Appliances - Part 2-4: Particular Requirements for
Independently Mounted Switches First Edition
Switches for Appliances Part 2-5: Particular Requirements for
Change-Over Selectors First Edition; CENELEC EN 61058-2-5:
1994
Non-Impregnated Densified Laminated Wood for Electrical Purposes
- Part 1: Definitions, Designation and General Requirements Second
Edition
Specification for Non-Impregnated, Densified Laminated Wood for
Electrical Purposes - Part 2: Methods of Test Edition 1.1; Edition
1:1992 Consolidated with Amendment 1:2001
Non-Impregnated Densified Laminated Wood for Electrical Purposes
- Part 3: Specifications for Individual Materials - Sheet 1: Sheets
Produced from Beech Veneer First Edition
Non-Impregnated Densified Laminated Wood for Electrical Purposes
- Part 3: Specifications for Individual Materials - Sheet 2: Rings
Produced from Beech Veneer First Edition
Acoustics - Measurement of Airborne Noise Emitted by Steam
Turbines and Driven Machinery First Edition; CENELEC EN 61 063:
1996
Acceptance Tests for Steam Turbine Speed Control Systems First
61065
61066
61067-1
61067-2
61067-3-1
61068-1
61068-2
61069-2
61069-7
61070
61071-1
61068-3-1
61069-1
61069-3
61069-4
61069-5
61069-6
Edition; (CENELEC EN 61064:1993)
Method for Evaluating the Low Temperature Flow Properties of
Mineral Insulating Oils After Ageing First Edition; CENELEC EN
61065:1993; Corrigendum 12/1993
Thermoluminescence Dosimetry Systems for Personal and
Environmental Monitoring First Edition
Specification for Glass and Glass Polyester Fibre Woven Tapes Part
1: Definitions, Classification and General Requirements First Edition
Specification for Glass and Glass Polyester Fibre Woven Tapes Part
2: Methods of Test First Edition
Glass and Glass Polyester Fibre Woven Tapes - Part 3: Specifications
for Individual Materials - Sheet 1: Type 1, 2 and 3 Tapes First
Edition; CENELEC EN 61067-3-1: 1995
Specification for Polyester Fibre Woven Tapes Part 1: Definitions,
Designation and General Requirements First Edition
Specification for Polyester Fibre Woven Tapes Part 2: Methods of
Test First Edition
Industrial-Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment Part 2: Assessment
Methodology First Edition
Industrial-Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment - Part 7:
Assessment of System Safety First Edition
Compliance Test Procedures for Steady-State Availability First
Edition
Power Electronic Capacitors Part 1: General First Edition
Polyester Fibre Woven Tapes Part 3: Specifications for Individual
Materials Sheet 1: Tapes Woven on Conventional or Shuttleless
Looms Second Edition; Corrigendum-1998
Industrial-Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment Part 1: General
Considerations and Methodology First Edition; (CENELEC EN
61069-1: 1993)
Industrial-Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment - Part 3:
Assessment of System Functionality First Edition
Industrial Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment - Part 4:
Assessment of System Performance First Edition; Corrigendum1997
Industrial-Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment - Part 5:
Assessment of System Dependability First Edition (CENELEC EN
61069-5: 1995)
Industrial Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment - Part 6:
61069-8
61071-2
61072
61073-1
61073-3
61074
61075
61076-1
61076-2
61076-2-001
61077
61078
61079-1
61079-2
61076-3
Assessment of System Operability First Edition
Industrial-Process Measurement and Control - Evaluation of System
Properties for the Purpose of System Assessment - Part 8:
Assessment of Non-Task-Related System Properties First Edition
Power Electronic Capacitors - Part 2: Requirements for
Disconnecting Test on Fuses, Destruction Test, Self-Healing Test and
Endurance Test First Edition; CENELEC EN 61071-2: 1996
Methods of Test for Evaluating the Resistance of Insulating Materials
Against the Initiation of Electrical Trees First Edition
Mechanical Splices and Fusion Splice Protectors for Optical Fibres
and Cables - Part 1: Generic Specification Third Edition
Splices for Optical Fibres and Cables Part 3: Sectional Specification Fusion Splices for Optical Fibres and Cables First Edition; (IECQ QC
850200)
Determination of Heats and Temperatures of Melting and
Crystallization of Electrical Insulating Materials by Differential
Scanning Calorimetry First Edition; (CENELEC EN 61074:1993)
Loran-C Receivers for Ships Minimum Performance Standards Methods of Testing and Required Test Results First Edition;
(CENELEC EN 61075:1993)
Connectors with Assessed Quality, for Use in D.C., Low Frequency
Analogue and in Digital High Speed Data Applications - Part 1:
Generic Specification First Edition; IECQ QC 480000; Corrigendum1995; CENELEC EN 61 076-1: 1995; Amendment 1-1996;
Amendment 2:
Connectors for Use in d.c., Low-Frequency Analogue and Digital
High Speed Data Applications - Part 2: Circular Connectors with
Assessed Quality - Sectional Specification First Edition; IECQ QC
480100
Connectors for Electronic Equipment - Part 2-001: Circular
Connectors - Blank Detail Specification First Edition; IECQ QC
480101
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape on Type VHS - Compact VHS Video Cassette First
Edition
Analysis Techniques for Dependability - Reliability Block Diagram
Method First Edition; (CENELEC EN 61078:1993)
Methods of Measurement on Receivers for Satellite Broadcast
Transmissions in the 12 GHz Band Part 1: Radio-Frequency
Measurements on Outdoor Units First Edition
Methods of Measurement on Receivers for Satellite Broadcast
Transmissions in the 12 GHz Band Part 2: Electrical Measurements
on DBS Tuner Units First Edition
Connectors for Use in d.c., Low-Frequency Analogue and Digital
High-Speed Data Applications - Part 3: Rectangular Connectors with
Assessed Quality - Sectional Specification First Edition
61076-3-001
61076-3-100
61076-4
61076-4-001
61076-3-101
61076-4-100
61076-4-103
61076-4-104
61080
61081
61082-3
61076-4-101
61076-4-102
Connectors for Use in d.c., Low-Frequency Analogue and Digital
High-Speed Data Applications - Part 3-001: Rectangular Connectors
with Assessed Quality - Blank Detail Specification First Edition
Connectors for Use in d.c., Low-Frequency Analogue and Digital
High-Speed Data Applications - Part 3-100: Rectangular Connectors
with Assessed Quality - Detail Specification for a Range of Shielded
Connectors with Trapezoidal-Shaped Shells and Non-Removabl
Connectors with Assessed Quality, for Use in D.C., Low-Frequency
Analogue and in Digital High-Speed Data Applications - Part 4:
Sectional Specification - Printed Board Connectors First Edition;
IECQ QC 480300
Connectors with Assessed Quality, for Use in D.C., Low-Frequency
Analogue and in Digital High-Speed Data Applications - Part 4:
Printed Board Connectors - Section 001: Blank Detail Specification
First Edition; IECQ QC 480301
Connectors with Assessed Quality, for Use in d.c., Low-Frequency
Analogue and in Digital High-Speed Data Applications - Part 3:
Rectangular Connectors - Section 101: Detail Specification for a
Range of Shielded Connectors with Trapezoidal Shaped Shells and
Connectors for Electronic Equipment - Part 4-100: Printed Board
Connectors with Assessed Quality - Detail Specification for Two-Part
Connector Modules Having a Grid of 2,5 mm for Printed Boards and
Backplanes Second Edition; IECQ QC 480301/XX 0001
Connectors for Use in d.c. Low-Frequency Analogue and Digital
High Speed Data Applications - Part 4-103: Printed Board
Connectors with Assessed Quality - Detail Specification for Two-Part
Connectors with Shielding and a Basic Grid of 2,5 mm First Edition;
Connectors for Use in d.c. Low-Frequency Analogue and Digital
High Speed Data Applications - Part 4-104: Printed Board
Connectors with Assessed Quality - Detail Specification for Two-Part
Connectors, Basic Grid of 2,0 mm, with Terminations on a Multiple
Gr
Guide to the Measurement of Equivalent Electrical Parameters of
Quartz Crystal Units First Edition
Pneumatic Instruments Driven by Associated Process Gas - Safe
Installation and Operating Procedures - Guidelines First Edition
Preparation of Documents Used in Electrotechnology - Part 3:
Connection Diagrams, Tables and Lists First Edition; CENELEC EN
61082-3: 1994; AS/NZS 4383.3: 1996
Connectors with Assessed Quality, for Use in D.C. Low-Frequency
Analogue and in Digital High Speed Data Applications - Part 4:
Printed Board Connectors - Section 101: Detail Specification for
Two-Part Connector Modules Having a Basic Grid of 2,0 mm for Pri
Connectors with Assessed Quality for Use in d.c., Low-Frequency
Analogue and in Digital High Speed Data Applications - Part 4:
Printed Board Connectors - Section 102: Detail Specification for
61076-4-105
61076-4-107
61076-4-110
PAS 61076-4115
61076-5
61076-7
61079-3
61079-4
61079-5
61082-1
61082-2
61082-4
Two-Part Single-Pole Connectors, for Multiple Uses on Plug-In Un
Connectors with Assessed Quality, for Use in D.C., Low-Frequency
Analogue and in Digital High Speed Data Applications - Part 4:
Printed Board Connectors - Section 105: Detail Specification for 9
mm Circular Connector with 3 to 8 Contacts for Use in a Wide
Connectors for Electronic Equipment - Part 4-107: Printed Board
Connectors with Assessed Quality - Detail Specification for Shielded
Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part
with Solder and Press-In Terminations for Printed Boards, Fre
Connectors for Electronic Equipment - Part 4-110: Printed Board
Connectors with Assessed Quality - Detail Specification for Latched
Cable Connector System Having a Basic Grid of 2,0 mm Including
Full Shielded and Latching Function First Edition; QC 480301X
Connectors for Electronic Equipment - Part 4-115: Printed Board
Connectors - Detail Specification for a Single-Part Hybrid Connector,
with a Section of High-Speed Differential Pair Connections, and a
Section of Low-Speed, Power and Ground Connections betwe
Connectors for Use in D.C., Low Frequency Analogue and Digital
High-Speed Data Applications - Part 5: In-Line Sockets with
Assessed Quality - Sectional Specification First Edition; IECQ QC
480400
Connectors for Use in D.C., Low-Frequency Analogue and Digital
High-Speed Data Applications - Part 7: Cable Outlet Accessories
with Assessed Quality, Including Qualification and Capability
Approval - Sectional Specification First Edition; IECQ QC 480600
Methods of Measurement on Receivers for Satellite Broadcast
Transmissions in the 12 GHz Band Part 3: Electrical Measurements
of Overall Performance of Receiver Systems Comprising an Outdoor
Unit and a DBS Tuner Unit First Edition
Methods of Measurement on Receivers for Satellite Broadcast
Transmissions in the 12 GHz Band Part 4: Electrical Measurements
on Sound/Data Decoder Units for the Digital Subcarrier NTSC
System
Methods of Measurement on Receivers for Satellite Broadcast
Transmissions in the 12 GHz Band Part 5: Electrical Measurements
on Decoder Units for MAC/Packet Systems First Edition
Preparation of Documents Used in Electrotechnology - Part 1:
General Requirements First Edition (CENELEC EN 61082-1:1993);
(Corrigendum-Nov 1993), (Amendment 1-1995), (Amendment 21996) (AS/NZS 4383.1:1996)
Preparation of Documents Used in Electrotechnology Part 2:
Function-Oriented Diagrams First Edition; (CENELEC EN 61082-2:
1994) (Replaces 113 Pt 1,3,4, 5,6,7, and 8) (AS/NZS 4383.2:1996)
Preparation of Documents Used in Electrotechnology - Part 4:
Location and Installation Documents First Edition; CENELEC EN
61082-4: 1996
TR 61082-6
61083-1
61084-1
61084-2-4
61083-2
61084-2-1
61085
61086-1
61086-2
61086-3-1
61087
61088
61089
61094-1
61094-2
61094-3
61094-4
Preparation of Documents Used in Electrotechnology - Part 6: Index
First Edition
Instruments and Software Used for Measurement in High-Voltage
Impulse Tests - Part 1: Requirements for Instruments Second Edition;
Replaces IEC 60790 Ed. 1.0:1984
Cable Trunking and Ducting Systems for Electrical Installations Part
1: General Requirements First Edition; (Amendment 1-1993)
Cable Trunking and Ducting Systems for Electrical Installations Part 2: Particular Requirements - Section 4: Service Poles First
Edition
Digital Recorders for Measurements in High-Voltage Impulse Tests Part 2: Evaluation of Software Used for the Determination of the
Parameters of Impulse Waveforms First Edition
Cable Trunking and Ducting Systems for Electrical Installations Part 2: Particular Requirements - Section 1: Cable Trunking and
Ducting Systems Intended for Mounting on Walls or Ceilings First
Edition
General Considerations for Telecommunication Services for Electric
Power Systems First Edition
Specification for Coatings for Loaded Printed Wire Boards
(Conformal Coatings) Part 1: Definitions, Classification and General
Requirements First Edition; CENELEC EN 61086-1: 1994
Specification for Coatings for Loaded Printed Wire Boards
(Conformal Coatings) Part 2: Methods of Test First Edition;
CENELEC EN 61086-2: 1994
Coatings for Loaded Printed Wire Boards (Conformal Coatings) Part 3: Specifications for Individual Materials - Sheet 1: Coatings for
General Purpose (Class I) and for High Reliability (Class II) First
Edition
Guide for Evaluating the Discharges from a Charged Surface First
Edition
Characteristics and Measurements of Ultrasonic Piezoceramic
Transducers First Edition
Round Wire Concentric Lay Overhead Electrical Stranded
Conductors First Edition; Amendment 1-1997; Replaces 60207 thru
60210: 1966
Measurement Microphones - Part 1: Specifications for Laboratory
Standard Microphones Second Edition
Measurement Microphones Part 2: Primary Method for Pressure
Calibration of Laboratory Standard Microphones by the Reciprocity
Technique First Edition; CENELEC EN 61094-2: 1993
Measurement Microphone Part 3: Primary Method for Free-Field
Calibration of Laboratory Standard Microphones by the Reciprocity
Technique First Edition; Replaces IEC 60486: 1974
Measurement Microphones Part 4: Specifications for Working
Standard Microphones First Edition; CENELEC EN 61 094-4: 1995
61094-5
61095
61096
61097-1
61097-2
61098
61099
61100
61101
61097-3
61097-4
61097-5
61097-6
61097-7
Measurement Microphones - Part 5: Methods for Pressure Calibration
of Working Standard Microphones by Comparison First Edition
Electromechanical Contactors for Household and Similar Purposes
Edition 1.1; Edition 1:1992 Consolidated with Amendment 1:2000
Methods of Measuring the Characteristics of Reproducing Equipment
for Digital Audio Compact Discs First Edition; (CENELEC EN
61096: 1993) (Amendment 1-1996)
Global Maritime Distress and Safety System (GMDSS) - Part 1:
Radar Transponder - Marine Search and Rescue (SART) Operational and Performance Requirements, Methods of Testing and
Required Test Results First Edition
Global Maritime Distress and Safety System (GMDSS) - Part 2:
COSPAS-SARSAT EPIRB - Satellite Emergency Position Indicating
Radio Beacon Operating on 406 MHz - Operational and Performance
Requirements, Methods of Testing and Required Test Results First
Edit
Installed Personnel Surface Contamination Monitoring Assemblies
for Alpha and Beta Emitters First Edition
Specifications for Unused Synthetic Organic Esters for Electrical
Purposes First Edition; (CENELEC EN 61099:1992) (CorrigendumDec 1993)
Classification of Insulating Liquids According to Fire-Point and Net
Calorific Value First Edition
Absolute Calibration of Hydrophones Using the Planar Scanning
Technique in the Frequency Range 0,5 MHz to 15 MHz First Edition;
(CENELEC EN 61101:1993)
Global Maritime Distress and Safety System (GMDSS) - Part 3:
Digital Selective Calling (DSC) Equipment - Operational and
Performance Requirements, Methods of Testing and Required
Testing Results First Edition
Global Maritime Distress and Safety System (GMDSS) - Part 4:
INMARSAT-C Ship Earth Station and INMARSAT Enhanced Group
Call (EGC) Equipment - Operational and Performance Requirements,
Methods of Testing and Required Test Results First Edition
Global Maritime Distress and Safety System (GMDSS) - Part 5:
Inmarsat-E - Emergency Position Indicating Radio Beacon (EPIRB)
Operating Through the Inmarsat System - Operational and
Performance Requirements, Methods of Testing and Required Test
Results Firs
Global Maritime Distress and Safety System (GMDSS) - Part 6:
Narrowband Direct- Printing Telegraph Equipment for the Reception
of Navigational and Meteorological Warnings and Urgent
Information to Ships (NAVTEX) - Operational and Performance
Requirements,
Global Maritime Distress and Safety System (GMDSS) - Part 7:
Shipborne VHF Radiotelephone Transmitter and Receiver -
61097-8
61097-9
61097-10
61097-12
61102
61104
61105
61106
61107
61109
61110
61111
61112
61108-1
61108-2
Operational and Performance Requirements, Methods of Testing and
Required Test Results First Edition
Global Maritime Distress and Safety System (GMDSS) - Part 8:
Shipborne Watchkeeping Receivers for the Reception of Digital
Selective Calling (DSC) in the Maritime MF, MF/HF and VHF
Bands - Operational and Performance Requirements, Methods of
Testing and Re
Global Maritime Distress and Safety System (GMDSS) - Part 9:
Shipborne Transmitters and Receivers for Use in MF and HF Bands
Suitable for Telephony, Digital Selective Calling (DSC) and Narrow
Band Direct Printing (NBDP) - Operational and Performance Requir
Global Maritime Distress and Safety System (GMDSS) - Part 10:
Inmarsat-B Ship Earth Station Equipment - Operational and
Performance Requirements, Methods of Testing and Required Test
Results First Edition
Global Maritime Distress and Safety System (GMDSS) - Part 12:
Survival Craft Portable Two-Way VHF Radiotelephone Apparatus Operational and Performance Requirements, Methods of Testing and
Required Test Results First Edition
Measurement and Characterisation of Ultrasonic Fields Using
Hydrophones in the Frequency Range 0,5 MHz to 15 MHz First
Edition; (Amendment 1-1993) (CENELEC EN 61102:1993)
Compact Disc Video System - 12 cm CD-V First Edition;
(CENELEC EN 61104:1992)
Reference Tapes for Video Tape Recorder Systems First Edition;
CENELEC EN 61105: 1993
Videodisks - Methods of Measurement for Parameters First Edition;
(CENELEC EN 61106:1993)
Data Exchange for Meter Reading, Tariff and Load Control - Direct
Local Data Exchange Second Edition; CENELEC EN 61107: 1996
Composite Insulators for A.C. Overhead Lines with a Nominal
Voltage Greater Than 1 000 V - Definitions, Test Methods and
Acceptance Criteria First Edition; Amendment 1-1995
System Omega and Differential Omega Receivers for Ships Operational and Performance Requirements - Methods of Testing and
Required Test Results First Edition
Matting of Insulating Material for Electrical Purposes First Edition;
Corrigendum: 05-2000
Blankets of Insulating Material for Electrical Purposes First Edition;
Corrigendum: 05-2000
Global Navigation Satellite Systems (GNSS) - Part 1: Global
Positioning System (GPS) - Receiver Equipment - Performance
Standards, Methods of Testing and Required Test Results First
Edition CENELEC EN 61 108-1: 1996
Maritime Navigation and Radiocommunication Equipment and
Systems - Global Navigation Satellite Systems (GNSS) - Part 2:
61114-1
61114-2
61115
61116
61117
61118
61119-1
61119-2
61119-3
TR 61119-4
61119-5
61119-6
61119-7
61120-1
61120-2
61120-3
61120-4
61120-5
Global Navigation Satellite System (GLONASS) - Receiver
Equipment - Performance Standards, Methods of Testing and
Required Test Results
Receiving Antennas for Satellite Broadcast Transmissions in the
11/12 GHz Band - Part 1: Electrical Measurements Second Edition
Methods of Measurement on Receiving Antennas for Satellite
Broadcast Transmission in the 11/12 GHz Band - Part 2: Mechanical
and Environmental Tests on Individual and Collective Receiving
Antennas First Edition
Expression of Performance of Sample Handling Systems for Process
Analyzers First Edition; (CENELEC EN 61115:1993)
Electromechanical Equipment Guide for Small Hydroelectric
Installations First Edition; CENELEC EN 61116: 1994
Method for Assessing the Short-Circuit Withstand Strength of
Partially Type-Tested Assemblies (PTTA) First Edition
Helican-Scan Video Type Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape - Type M2 First Edition; (CENELEC EN
61118:1993)
Digital Audio Tape Cassette System (DAT) Part 1: Dimensions and
Characteristics First Edition
Digital Audio Tape Cassette System Part 2: DAT Calibration Tape
First Edition; CENELEC EN 61119-2: 1994
Digital Audio Tape Cassette System (DAT) Part 3: DAT Tape
Properties First Edition; CENELEC EN 1119-3: 1994
Digital Audio Tape (DAT) Cassette System - Part 4: Character Pack
Format First Edition
Digital Audio Tape Cassette System (DAT) Part 5: DAT for
Professional Use First Edition; CEN EN 6119-5: 1995
Digital Audio Tape Cassette System (DAT) Part 6: Serial Copy
Management System First Edition
Digital Audio Tape Cassette System (DAT) - Part 7: DAT Logo
Application Rule First Edition
Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm
Magnetic Tape, for Professional Use Part 1: General Requirements
First Edition; (CENELEC EN 61120-1: 1993)
Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm
Magnetic Tape, for Professional Use Part 2: Format A First Edition;
(CENELEC EN 61120-2: 1993)
Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm
Magnetic Tape, for Professional Use Part 3: Format B First Edition;
(CENELEC EN 61120-3: 1993)
Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm
Magnetic Tape, for Professional Use Part 4: Magnetic Tape
Properties: Definitions and Methods of Measurement First Edition;
(CENELEC EN 61120-4: 1992)
Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm
61121
61123
61124
61125
61126
61127
61128
61131-1
61131-2
61131-3
61131-4
61131-5
61131-7
TR 61131-8
61133
61134
61135
61136-1
61137
61138
Magnetic Tape, for Professional Use Part 5: Reels First Edition;
CENELEC EN 61120-5: 1995
Tumbler Dryers for Household Use - Methods for Measuring the
Performance Second Edition
Reliability Testing Compliance Test Plans for Success Ratio First
Edition; Replaces IEC 60605-5: 1982
Reliability Testing - Compliance Tests for Constant Failure Rate and
Constant Failure Intensity First Edition
Unused Hydrocarbon-Based Insulating Liquids - Test Methods for
Evaluating the Oxidation Stability First Edition; Corrigendum-1992;
Replaces IEC 60474: 1974 and IEC 60813: 1985
Procedure for Use in the Preparation of Maximum Lamp Outlines
First Edition; (Amendment 1-1996)
High Pressure Xenon Short Arc Lamps - Dimensional, Electrical and
Photometric Data and Cap Types First Edition
Alternating Current Disconnectors Bus-Transfer Current Switching
by Disconnectors First Edition; (Amendment 1-1994)
Programmable Controllers - Part 1: General Information First
Edition; CENELEC EN 61131-1: 1994
Programmable Controllers - Part 2: Equipment Requirements and
Tests First Edition; CENELEC EN 61131-2: 1994
Programmable Controllers - Part 3: Programming Languages First
Edition; (CENELEC EN 61131-3: 1993)
Programmable Controllers - Part 4: User Guidelines First Edition
NEMA IA 2.4-1995;
Programmable Controllers - Part 5: Communications First Edition
Programmable Controllers - Part 7: Fuzzy Control Programming First
Edition
Programmable Controllers - Part 8: Guidelines for the Application
and Implementatin of Programming Languages First Edition
Electric Traction - Rolling Stock - Test Methods for Electric and
Thermal/Electric Rolling Stock on Completion of Construction and
Before Entry into Service First Edition; Replaces 60165: 1973 and
IEC 60490: 1974
Airborne Instrumentation for Measurement of Terrestrial Gamma
Radiation First Edition
Decca Navigator System: Receivers for Ships Minimum Performance
Standards - Methods of Testing and Required Test Results First
Edition
Semiconductor Power Convertors - Adjustable Speed Electric Drive
Systems - General Requirements Part 1: Rating Specifications,
Particularly for D.C. Motor Drives First Edition
Radiation Protection Instrumentation - Installed Personnel Surface
Contamination Monitoring Assemblies - Low Energy X and Gamma
Emitters First Edition
Cables for Portable Earthing and Short-Circuiting Equipment Second
61140
61141
61143-1
61143-2
61144
61145
61146-1
61146-3
61146-4
61148
TR 61149
61150
61151
61152
61153
61156-1
61156-1-1
61156-2
61156-2-1
Edition; Amendment 1-1995
Protection Against Electric Shock - Common Aspects for Installation
and Equipment Third Edition
Upper Frequency Limit of R.F. Coaxial Connectors First Edition
Electrical Measuring Instruments - X-t Recorders - Part 1: Definitions
and Requirements Edition 1.1; Edition 1: 1992 Consolidated with
Amendment 1: 1997
Electrical Measuring Instruments - X-t Recorders Part 2:
Recommended Additional Test Methods First Edition; Replaces IEC
60484: 1974
Test Method for the Determination of Oxygen Index of Insulating
Liquids First Edition; (CENELEC EN 61144:1993)
Calibration and Usage of Ionization Chamber Systems for Assay of
Radionuclides First Edition
Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement Part 1: Non-Broadcast Single-Sensor Cameras First Edition
Video Cameras (PAL/SECAM/NTSC) - Methods of Measurements Part 3: Non-Broadcast Camera-Recorders First Edition
Video Cameras (PAL/SECAM/NTSC) - Methods of Measurements Part 4: Automatic Functions of Video Cameras and CameraRecorders First Edition
Terminal Markings for Valve Device Stacks and Assemblies and for
Power Convertor Equipment First Edition; Corrigendum-1995
Guide for Safe Handling and Operation of Mobile Radio Equipment
First Edition
Alkaline Secondary Cells and Batteries Sealed Nickel-Cadmium
Rechargeable Monobloc Batteries in Button Cell Design First
Edition; Corrigendum 03/1992; CENELEC EN 61150: 1993
Nuclear Instrumentation - Amplifiers and Preamplifiers Used with
Detectors of Ionizing Radiation - Test Procedures First Edition
Dimensions of Metal- Sheathed Thermometer Elements First Edition
Electrical and Pneumatic Analogue Chart Recorders for Use in
Industrial- Process Control Systems - Guidance for Inspection and
Routine Testing First Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 1: Generic Specification Edition 1.2; Edition
1:1994 Consolidated with Amendments 1:1999 and 2:2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 1-1: Capability Approval - Generic
Specification First Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 2: Horizontal Floor Wiring - Sectional
Specification Edition 1.1; Edition 1: 1995 Consolidated with
Amendment 1: 1999; Amendment 2:06-2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 2-1: Horizontal Floor Wiring - Blank Detail
61156-2-2
61156-3
61156-3-1
61156-3-2
61156-4
61156-4-1
61156-4-2
PAS 61156-5
PAS 61156-6
61157
61158-2
61158-3
61158-4
61158-5
Specification Edition 1.2; Edition 1:1995 Consolidated with
Amendments 1:1999 and 2:2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 2-2: Horizontal Floor Wiring - Capability
Approval - Sectional Specification First Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 3: Work Area Wiring - Sectional
Specification Edition 1.1; Edition 1: 1995 Consolidated with
Amendment 1: 1999; Amendment 2:06-2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 3-1: Work Area Wiring - Blank Detail
Specification Edition 1.2; Edition 1: 1995 Consolidated with
Amendments 1:1999 and 2:2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 1-2: Work Area Wiring - Capability Approval
- Sectional Specification First Edition
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 4: Riser Cables - Sectional Specification
Edition 1.1; Edition 1:1995 Consolidated with Amendment 1:1999;
Amendment 2:06-2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 4-1: Riser Cables - Blank Detail Specification
Edition 1.2; Edition 1:1995 Consolidated with Amendments 1:1999
and 2:2001
Multicore and Symmetrical Pair/Quad Cables for Digital
Communications - Part 4-2: Riser Cables - Capability Approval Sectional Specification First Edition
Symmetrical Pair/Quad Cables for Digital Communications with
Transmission Characteristics up to 600 MHz - Horizontal Floor
Wiring - Sectional Specification Edition 1.0
Symmetrical Pair/Quad Cables for Digital Communications with
Transmission Characteristics up to 600 MHz - Work Area Wiring Sectional Specification Edition 1.0
Requirements for the Declaration of the Acoustic Output of Medical
Diagnostic Ultrasonic Equipment First Edition; (CENELEC EN
61157: 1994) (AS/NZS 4194: 1994)
Fieldbus Standard for Use in Industrial Control Systems - Part 2:
Physical Layer Specification and Service Definition Second Edition
Digital Data Communications for Measurement and Control Fieldbus for Use in Industrial Control Systems - Part 3: Data Link
Service Definition Second Edition
Digital Data Communications for Measurement and Control - Field
bus for Use in Industrial Control Systems - Part 4: Data Link Protocol
Specification Second Edition
Digital Data Communications for Measurement and Control Fieldbus for Use in Industrial Control Systems - Part 5: Application
61158-6
61160
61161
61162-1
61162-2
61163-1
61163-2
61164
61165
61166
61167
61168
61169-1
61169-1-1
61169-31
61169-32
61169-33
61170
Layer Service Definition Second Edition
Digital Data Communications for Measurement and Control Fieldbus for Use in Industrial Control Systems - Part 6: Application
Layer Protocol Specification Second Edition
Formal Design Review First Edition; Amendment 1-1994
Ultrasonic Power Measurement in Liquids in the Frequency Range
0,5 MHz to 25 MHz Edition 1.1; Amendment 1- 1998
Maritime Navigation and Radiocommunication Equipment and
Systems - Digital Interfaces - Part 1: Single Talker and Multiple
Listeners Second Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - Digital Interfaces - Part 2: Single Talker and Multiple
Listeners, High-Speed Transmission First Edition
Reliability Stress Screening - Part 1: Repairable Items Manufactured
in Lots First Edition; Corrigendum: 12/1999
Reliability Stress Screening - Part 2: Electronic Components First
Edition
Reliability Growth - Statistical Test and Estimation Methods First
Edition
Application of Markov Techniques First Edition
High-Voltage Alternating Current Circuit-Breakers - Guide for
Seismic Qualification of High-Voltage Alternating Current CircuitBreakers First Edition; (CENELEC EN 61166:1993)
Metal Halide Lamps First Edition; Amendment 1-1995; Amendment
2-1997; Amendment 3-1998
Radiotherapy Simulators - Functional Performance Characteristics
First Edition; CENELEC EN 61168: 1994; AS/NZS 4213.1: 1994
Radio-Frequency Connectors - Part 1: Generic Specification General Requirements and Measuring Methods Edition 1.2; Edition
1: 1992 Consolidated with Amendments 1: 1996 and 2: 1997; QC
220000
Radio-Frequency Connectors Part 1-1: Single, Multi-Series, DualLanguage Blank Detail Specification First Edition; (IECQ QC
220001)
Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with
Inner Diameter of Outer Conductor 1,0 mm (0,039 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type 1,0) First
Edition; IECQ QC 223100
Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with
Inner Diameter of Outer Conductor 1,85 mm (0,072 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type 1,85) First
Edition
Radio-Frequency Connectors Part 33: Sectional Specification for
Series BMA R.F. Connectors First Edition; IECQ QC 222800
Radiotherapy Simulators - Guidelines for Functional Performance
Characteristics First Edition; AS/NZS 4213.2: 1994
61171
61172
61173
61169-36
61174
61175
61176
61186-1
61187
61188-1-1
61188-1-2
61189-1
61189-2
61189-3
61191-1
61191-2
61191-3
Radiation Protection Instrumentation - Monitoring Equipment Atmospheric Radioactive Iodines in the Environment First Edition
Radiation Protection Instrumentation - Monitoring Equipment Radioactive Aerosols in the Environment First Edition
Overvoltage Protection for Photovoltaic (PV) Power Generating
Systems - Guide First Edition; CENELEC EN 61173: 1994
Radio-Frequency Connectors Part 36: Microminiature R.R. Coaxial
Connectors with Snap-On Coupling - Characteristic Impedance 50
(Type MCX) First Edition; IECQ QC 223600
Maritime Navigation and Radiocommunication Equipment and
Systems - Electronic Chart Display and Information System (ECDIS)
- Operational and Performance Requirements, Methods of Testing
and Required Test Results Second Edition
Designations for Signals and Connections First Edition; (CENELEC
EN 61175:1993)
Hand-Held Electric Mains Voltage Operated Circular Saws Methods for Measuring the Performance First Edition; (CENELEC
EN 61176:1993)
Transformers and Inductors for Use in Telecommunication and
Electronic Equipment - Designations for Cores and Assemblies Part
1: Laminated Cores First Edition
Electrical and Electronic Measuring Equipment - Documentation
First Edition; CENELEC EN 61187: 1994; Cancels and Replaces IEC
60278: 1968 and IEC 60278A: 1974
Printed Boards and Printed Board Assemblies - Design and Use - Part
1-1: Generic Requirements - Flatness Considerations for Electronic
Assemblies First Edition
Printed Boards and Printed Board Assemblies - Design and Use - Part
1-2: Generic Requirements - Controlled Impedance First Edition
Test Methods for Electrical Materials, Interconnection Structures and
Assemblies - Part 1: General Test Methods and Methodology First
Edition; Amendment 1:8-2001
Test Methods for Electrical Materials, Interconnection Structures and
Assemblies - Part 2: Test Methods for Materials for Interconnection
Structures First Edition; Corrigendum-1997; Amendment 1-1/2000
Test Methods for Electrical Materials, Interconnection Structures and
Assemblies - Part 3: Test Methods for Interconnection Structures
(Printed Boards) First Edition; Amendment 1: 07-1999
Printed Board Assemblies - Part 1: Generic Specification Requirements for Soldered Electrical and Electronic Assemblies
Using Surface Mount and Related Assembly Technologies First
Edition
Printed Board Assemblies - Part 2: Sectional Specification Requirements for Surface Mount Soldered Assemblies First Edition
Printed Board Assemblies - Part 3: Sectional Specification Requirements for Through-Hole Mount Soldered Assemblies First
61191-4
60884-2-2
60884-2-3
60884-2-4
60884-2-5
60884-2-6
60885-1
60885-2
60885-3
60886
60887
60888
60889
60890
60891
60892
60893-1
60893-2
60893-3-1
Edition
Printed Board Assemblies - Part 4: Sectional Specification Requirements for Terminal Soldered Assemblies First Edition
Plugs and Socket-Outlets for Household and Similar Purposes Part 2:
Particular Requirements for Socket-Outlets for Appliances First
Edition
Plugs and Socket-Outlets for Household and Similar Purposes Part 2:
Particular Requirements for Switched Socket-Outlets without
Interlock for Fixed Installations First Edition
Plugs and Socket-Outlets for Household and Similar Purposes - Part
2-4: Particular Requirements for Plugs and Socket-Outlets for SELV
Second Edition
Plugs and Socket-Outlets for Household and Similar Purposes - Part
2: Particular Requirements for Adaptors First Edition
Plugs and Socket-Outlets for Household and Similar Purposes - Part
2-6: Particular Requirements for Switched Socket-Outlets with
Interlock for Fixed Installations First Edition
Electrical Test Methods for Electric Cables Part 1: Electrical Tests for
Cables, Cords and Wires for Voltages up to and Including 450/750 V
First Edition
Electrical Test Methods for Electric Cables Part 2: Partial Discharge
Tests First Edition
Electrical Test Methods for Electric Cables Part 3: Test Methods for
Partial Discharge Measurements on Lengths of Extruded Power
Cable First Edition
Investigations on Test Procedures for Ultrasonic Cleaners First
Edition
Glass Bulb Designation System for Lamps First Edition
Zinc-Coated Steel Wires for Stranded Conductors First Edition
Hard-Drawn Aluminium Wire for Overhead Line Conductors First
Edition
A Method of Temperature- Rise Assessment by Extrapolation for
Partially Type-Tested Assemblies (PTTA) of Low-Voltage
Switchgear and Controlgear First Edition; (Amendment 1-1995)
Procedures for Temperature and Irradiance Corrections to Measured
I-V Characteristics of Crystalline Silicon Photovoltaic Devices First
Edition; (Amendment 1-1992) (CENE EN 60891:1994)
Effects of Unbalanced Voltages on the Performance of Three- Phase
Cage Induction Motors First Edition
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 1: Definitions,
Designations and General Requirements First Edition
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 2: Methods of Test
First Edition; Corrigendum-1995
Specification for Industrial Rigid Laminated Sheets Based on
60893-3-2
60893-3-3
60893-3-4
60893-3-5
60893-3-6
60893-3-7
60898-2
60899
60900
60901
60903
60904-1
60904-2
60904-3
Thermosetting Resins for Electrical Purposes Part 3: Specifications
for Individual Materials - Sheet 1: Types of Industrial Rigid
Laminated Sheets First Edition; (Amendment 1-1996)
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 2: Requirements for Rigid Laminated
Sheets Based on Epoxide Resins Edition 1.1; Edition 1: 1
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 3: Specifications
for Individual Materials - Sheet 3: Requirements for Rigid Laminated
Sheets Based on Melamine Resins First Edition; Corrigendum
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 3: Specifications
for Individual Materials - Sheet 4: Requirements for Rigid Laminated
Sheets Based on Phenolic Resins First Edition; Corrigendum
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 3: Specifications
for Individual Materials - Sheet 5: Requirements for Rigid Laminated
Sheets Based on Polyester Resins First Edition; Corrigendu
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 3: Specifications
for Individual Materials - Sheet 6: Requirements for Rigid Laminated
Sheets Based on Silicone Resins First Edition; Corrigendum
Specification for Industrial Rigid Laminated Sheets Based on
Thermosetting Resins for Electrical Purposes Part 3: Specifications
for Individual Materials - Sheet 7: Requirements for Rigid Laminated
Sheets Based on Polyimide Resins First Edition; Corrigendu
Circuit-Breakers for Overcurrent Protection for Household and
Similar Installations - Part 2: Circuit-Breakers for A.C. and D.C.
Operation First Edition
Sampling Rate and Source Encoding for Professional Digital Audio
Recording First Edition
Hand Tools for Live Working up to 1000 V A.C. and 1500 V D.C.
First Edition; CENELEC EN 60900: 1993; Amendment 1-1995;
Corrigendum 05-2000
Single-Capped Fluorescent Lamps - Performance Specifications
Second Edition; Amendment 1: 06/1997; Amendment 2: 04/2000
Specification for Gloves and Mitts of Insulating Material for Live
Working First Edition; CENELEC EN 60903: 1992; Corrigendum:
05-2000
Photovoltaic Devices Part 1: Measurement of Photovoltaic CurrentVoltage Characteristics First Edition; CENELEC EN 60904-1: 1993
Photovoltaic Devices Part 2: Requirements for Reference Solar Cells
First Edition; Amendment 1-1998
Photovoltaic Devices Part 3: Measurement Principles for Terrestrial
Photovoltaic (PV) Solar Devices with Reference Spectral Irradiance
60904-5
60904-6
60904-7
60904-8
60904-9
60904-10
60905
60906-1
60906-2
60906-3
60907
60908
60909-0
60909-1
60909-2
60909-3
60910
60911
Data First Edition; (CENELEC EN 60904-3: 1993)
Photovoltaic Devices - Part 5: Determination of the Equivalent Cell
Temperature (ECT) of Photovoltaic (PV) Devices by the OpenCircuit Voltage Method First Edition; CENELEC EN 60 904-5: 1995
Photovoltaic Devices - Part 6: Requirements for Reference Solar
Modules First Edition; Amendment 1-1998
Photovoltaic Devices - Part 7: Computation of Spectral Mismatch
Error Introduced in the Testing of a Photovoltaic Device Second
Edition
Photovoltaic Devices - Part 8: Measurement of Spectral Response of
a Photovoltaic (PV) Device Second Edition
Photovoltaic Devices - Part 9: Solar Simulator Performance
Requirements First Edition
Photovoltaic Devices - Part 10: Methods of Linearity Measurement
First Edition
Loading Guide for Dry-Type Power Transformers First Edition;
Corrigendum 04/1991
IEC System of Plugs and Socket-Outlets for Household and Similar
Purposes Part 1:Plugs and Socket-Outlets 16 A 250 V A.C. First
Edition
IEC System of Plugs and Socket-Outlets for Household and Similar
Purposes - Part 2: Plugs and Socket-Outlets 15 A 125 V A.C. Second
Edition; Supersedes IEC 906-2: 1992
IEC System of Plugs and Socket-Outlets for Household and Similar
Purposes - Part 3: SELV Plugs and Socket-Outlets, 16 A 6 V, 12 V,
24 V, 48 V, A.C. and D.C. First Edition
Local Area Networks CSMA/CD 10 Mbit/s Baseband Planning and
Installation Guide First Edition
Audio Recording - Compact Disc Digital Audio System Second
Edition
Short-Circuit Current Calculation in Three-Phase A.C. Systems - Part
0: Calculation of Currents First Edition
Short-Circuit Current Calculation in Three-Phase A.C. Systems Part
1: Factors for the Calculation of Short-Circuit Currents in ThreePhase A.C. Systems According to IEC 909 First Edition
Electrical Equipment - Data for Short-Circuit Current Calculations in
Accordance with IEC 909 (1988) First Edition
Short-Circuit Current Calculation in Three-Phase A.C. Systems - Part
3: Currents During Two Separate Simultaneous Single Phase Line-toEarth Short Circuits and Partial Short-Circuit Currents Flowing
Through Earth First Edition
Containment Monitoring Instrumentation for Early Detection of
Developing Deviations from Normal Operation in Light Water
Reactors First Edition
Measurements for Monitoring Adequate Cooling within the Core of
Pressurized Light Water Reactors First Edition
60912
60913
60914
TR 60909-4
60915
60917-1
60917-2
60917-2-1
60917-2-2
60918
60919-1
60919-2
TS 60919-3
60921
60923
60925
Nuclear Instrumentation - ECL (Emitter Coulpled Logic) Front Panel
Interconnection in Counter Logic Second Edition
Electric Traction Overhead Lines First Edition
Conference Systems - Electrical and Audio Requirements First
Edition
Short-Circuit Currents in Three-Phase a.c. Systems - Part 4:
Examples for the Calculation of Short-Circuit Currents First Edition;
Shall Be Used in Conjunction with IEC 60909-0
Capacitors and Resistors for Electronic Equipment Preferred
Dimensions of Spindle Ends, Bushes and for the Mounting of SingleHole, Bush-Mounted, Spindle-Operated Electronic Components First
Edition
Modular Order for the Development of Mechanical Structures for
Electronic Equipment Practices - Part 1: Generic Standard First
Edition; Amendment 1 05-2000
Modular Order for the Development of Mechanical Structures for
Electronic Equipment Practices Part 2: Sectional Specification Interface Co-Ordination Dimensions for the 25 mm Equipment
Practice First Edition
Modular Order for the Development of Mechanical Structures for
Electronic Equipment Practices - Part 2: Sectional Specification Interface Co-Ordination Dimensions for the 25 mm Equipment
Practice - Section 1: Detail Specification - Dimensions for Cabinet
Modular Order for the Development of Mechanical Structures for
Electronic Equipment Practices - Part 2: Sectional Specification Interface Co-Ordination Dimensions for the 25 mm Equipment
Practice - Section 2: Detail Specification - Dimensions for Subrack
PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for
Insulation Displacement Termination First Edition; (Amendment 11992)
Performance of High-Voltage D.C. (HVDC) Systems Part 1: SteadyState Conditions First Edition
Performance of High-Voltage D.C. (HVDC) Systems Part 2: Faults
and Switching First Edition
Performance of High-Voltage Direct Current (HVDC) Systems - Part
3: Dynamic Conditions First Edition
Ballasts for Tubular Fluorescent Lamps Performance Requirements
First Edition; Corrigendum 04/1989; Amendment 1-1990;
Amendment 2-1994; CENELEC EN 60921: 1991, AMD A1: 1992,
A2: 1995
Auxiliaries for Lamps - Ballasts for Discharge Lamps - (Excluding
Tubular Fluorescent Lamps) - Performance Requirements Second
Edition; Amendment 1: 8/2001; CENELEC EN 60923: 1996
DC Supplied Electronic Ballasts for Tubular Fluorescent Lamps Performance Requirements Edition 1:1989 Consolidated with
Amendments 1:1996 and 2:2001
60927
60929
60930
60931-1
60931-3
60932
60931-2
60933-1
60933-2
60933-3
60933-4
60933-5
60934
60935
60936-1
Auxiliaries for Lamps - Starting Devices (Other Than Glow Starters)
- Performance Requirements Edition 2.1; Consolidated with
Amendment 1:1999
A.C. - Supplied Electronic Ballasts for Tubular Fluorescent Lamps Performance Requirements First Edition; Corrigendum 06/1991;
Amendment 1-1994; Amendment 2-1996
Guidelines for Administrative, Medical, and Nursing Staff Concerned
with the Safe Use of Medical Electrical Equipment First Edition
Shunt Power Capacitors of the Non-Self-Healing Type for A.C.
Systems Having a Rated Voltage up to and Including 1 000 V - Part
1: General - Performance, Testing and Rating - Safety Requirements Guide for Installation and Operation Second Edition
Shunt Power Capacitors of the Non-Self-Healing Type for A.C.
Systems Having a Rated Voltage up to and Including 1 000 V - Part
3: Internal Fuses First Edition
Additional Requirements for Enclosed Switchgear and Controlgear
from 1 kV to 72.5 kV to Be Used in Severe Climatic Conditions First
Edition
Shunt Power Capacitors of the Non-Self-Healing Type for A.C.
Systems Having a Rated Voltage up to and Including 1 000 V - Part
2: Ageing Test and Destruction Test Second Edition; CENELEC EN
60931-2: 1996
Audio, Video and Audiovisual Systems - Interconnections and
Matching Values Part 1: 21-Pin Connector for Video Systems Application No.1 First Edition; Corrigendum 02/1989; Amendment
1-1992
Audio, Video and Audiovisual Systems - Interconnections and
Matching Values Part 2: 21-Pin Connector for Video Systems Application No.2 First Edition
Audio, Video and Audiovisual Systems - Interconnections and
Matching Values Part 3: Interface for the Interconnection of ENG
Cameras and Portable VTRs Using Non-Composite Signals, for 625
Line/50 Field Systems First Edition; CENELEC EN 60933-3: 1992
Audio, Video and Audiovisual Systems - Interconnections and
Matching Values - Part 4: Connector and Cordset for Domestic
Digital Bus (D2B) First Edition
Audio, Video and Audiovisual Systems - Interconnections and
Matching Values Part 5: Y/C Connector for Video Systems Electrical Matching Values and Description of the Connector First
Edition; (CENELEC EN 60933-5: 1993)
Circuit-Breakers for Equipment (CBE) Third Edition
Nuclear Instrumentation - Modular High Speed Data Acquisition
System - FASTBUS Second Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - Radar - Part 1: Shipborne Radar - Performance
Requirements - Methods of Testing and Required Test Results First
60936-2
60937
60938-1
60938-2
60938-2-1
60938-2-2
60939-1
60939-2
60940
60941
60942
TR 60943
60944
60945
60946
60947-1
60947-2
60947-3
60947-4-1
Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - Radar - Part 2: Shipborne Radar for High-Speed Craft
(HSC) - Methods of Testing and Required Test Results First Edition
Cryostat End-Cap Dimensions for Germanium Semiconductor
Detectors for Gamma-Ray Spectrometers First Edition
Fixed Inductors for Electromagnetic Interference Suppression - Part
1: Generic Specification Second Edition; IECQ QC 280000
Fixed Inductors for Electromagnetic Interference Suppression - Part
2: Sectional Specification Second Edition; IECQ QC 280100
Fixed Inductors for Electromagnetic Interference Suppression - Part
2-1: Blank Detail Specification - Inductors for Which Safety Tests are
Required - Assessment Level D First Edition; IECQ QC 280101
Fixed Inductors for Electromagnetic Interference Suppression - Part
2-2: Blank Detail Specification - Inductors for Which Safety Tests are
Required (Only) First Edition; IECQ QC 280102
Complete Filter Units for Radio Interference Suppression Part 1:
Generic Specification First Edition
Complete Filter Units for Radio Interference Suppression Part 2:
Sectional Specification Selection of Methods of Test and General
Requirements First Edition; (Amendment 1-1996)
Guidance Information on the Application of Capacitors, Resistors,
Inductors, and Complete Filter Units for Radio Interference
Suppression First Edition; Corrigendum-1998
Mechanical Endurance Functional Tests for Electrical Insulation
Systems First Edition
Electroacoustics - Sound Calibrators Second Edition; Amendment 1:
10/2000
Guidance Concerning the Permissible Temperature Rise for Parts of
Electrical Equipment, in Particular for Terminals Second Edition
Guide for the Maintenance of Silicone Transformer Liquids First
Edition
Maritime Navigation and Radiocommunication Equipment and
Systems - General Requirements - Methods of Testing and Required
Test Results Third Edition
Binary Direct Voltage Signals for Process Measurement and Control
Systems First Edition
Low-Voltage Switchgear and Controlgear - Part 1: General Rules
Edition 3.1; Edition 3: 1999 Consolidated with Amendment 1: 2000;
Amendment 2: 10-2001
Low-Voltage Switchgear and Controlgear - Part 2: Circuit-Breakers
Second Edition; Amendment 2:07-2001
Low-Voltage Switchgear and Controlgear - Part 3: Switches,
Disconnectors, Switch-Disconnectors and Fuse-Combination Units
Edition 2.1; Edition 2:1999 Consolidated with Amendment 1:2001
Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and
60947-4-2
60947-4-3
60947-5-1
60947-5-2
60947-5-3
60947-5-4
60947-5-5
60947-5-6
60947-6-1
60947-6-2
60948
60949
60950-1
60951-1
60947-7-1
Motor-Starters - Electromechanical Contactors and Motor-Starters
Second Edition
Low-Voltage Switchgear and Controlgear - Part 4-2: Contactors and
Motor-Starters - AC Semiconductor Motor Controllers and Starters
Second Edition; Amendment 1: 10-2001
Low-Voltage Switchgear and Controlgear Part 4-3: Contactors and
Motor-Starters - AC Semiconductor Controllers and Contactors for
Non-Motor Loads First Edition; Corrigendum May 2000
Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit
Devices and Switching Elements - Electromechanical Control Circuit
Devices Edition 2.2; Edition 2: 1997 Consolidated with Amendments
1 and 2: 1999
Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit
Devices and Switching Elements - Proximity Switches Edition 2.1
08/1999; Edition 2:1997 Consolidated with Amendment 1:1999
Low-Voltage Switchgear and Controlgear - Part 5-3: Control Circuit
Devices and Switching Elements - Requirements for Proximity
Devices with Defined Behaviour under Fault Conditions (PDF) First
Edition; Should be Read in Conjunction with IEC 60947-1 and IEC
Low-Voltage Switchgear and Controlgear - Part 5: Control Circuit
Devices and Switching Elements - Section 4: Methods of Assessing
the Performance of Low-Energy Contacts - Special Tests First
Edition; Corrigendum 1:2000
Low-Voltage Switchgear and Controlgear - Part 5-5: Control Circuit
Devices and Switching Elements - Electrical Emergency Stop Device
with Mechanical Latching Function First Edition
Low-Voltage Switchgear and Controlgear - Part 5-6: Control Circuit
Devices and Switching Elements - DC Interface for Proximity
Sensors and Switching Amplifiers (NAMUR) First Edition
Low-Voltage Switchgear and Controlgear - Part 6-1: Multiple
Function Equipment - Automatic Transfer Switching Equipment
Edition 1.2; Edition 1: 1989 Consolidated with Amendments 1: 1994
and 2: 1997
Low-Voltage Switchgear and Controlgear - Part 6-2: Multiple
Function Equipment - Control and Protective Switching Devices (or
Equipment) (CPS) Edition 1.2; Edition 1: 1992 Consolidated with
Amendment 1 and 2: 1998
Numeric Keyboard for Home Electronic Systems (HES) First Edition
Calculation of Thermally Permissible Short-Circuit Currents, Taking
into Account Non-Adiabatic Heating Effects First Edition
Information Technology Equipment - Safety - Part 1: General
Requirements First Edition
Radiation Monitoring Equipment for Accident and Post-Accident
Conditions in Nuclear Power Plants Part 1: General Requirements
First Edition
Low-Voltage Switchgear and Controlgear Part 7: Ancillary
60947-7-2
60952-3
60953-1
60953-2
60953-3
60955
60958-1
60958-2
60958-3
60958-4
60959
60960
61178-1
61178-2
61178-2-1
61178-3
61178-3-1
Equipment Section One - Terminal Blocks for Copper Conductors
Edition 1.1; Consolidated with Amendment 1: 1999
Low-Voltage Switchgear and Controlgear Part 7: Ancillary
Equipment - Section 2: Protective Conductor Terminal Blocks for
Copper Conductors First Edition (CENELEC EN 60947-7-2: 1995)
(AS 3947.7.2: 1996)
Aircraft Batteries Part 3: External Electrical Connectors First Edition
Rules for Steam Turbine Thermal Acceptance Tests Part 1: Method A
- High Accuracy for Large Condensing Steam Turbines First Edition;
CENELEC EN 60 953-1: 1995
Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B
- Wide Range of Accuracy for Various Types and Sizes of Turbines
First Edition; CENELEC EN 60 953-2: 1995
Rules for Steam Turbine Thermal Acceptance Tests - Part 3: Thermal
Performance Verification Tests of Retrofitted Steam Turbines First
Edition
Process Data Highway, Type C (PROWAY C), for Distributed
Process Control Systems First Edition; (Amendment 1-1992)
Digital Audio Interface - Part 1: General First Edition
Digital Audio Interface - Part 2: Software Information Delivery Mode
First Edition
Digital Audio Interface - Part 3: Consumer Applications First Edition
Digital Audio Interface - Part 4: Professional Applications First
Edition
Provisional Head and Torso Simulator for Acoustic Measurements on
Air Conduction Hearing Aids First Edition
Functional Design Criteria for a Safety Parameter Display System for
Nuclear Power Stations First Edition
Quartz Crystal Units - a Specification in the IEC Quality Assessment
System for Electronic Components (IECQ) Part 1: Generic
Specification First Edition; IECQ QC 680000
Quartz Crystal Units - a Specification in the IEC Quality Assessment
System for Electronic Components (IECQ) Part 2: Sectional
Specification - Capability Approval First Edition; IECQ QC 680100
Quartz Crystal Units - a Specification in the IEC Quality Assessment
System for Electronic Components (IECQ) Part 2: Sectional
Specification - Capability Approval - Section 1: Blank Detail
Specification First Edition; IECQ QC 680101
Quartz Crystal Units - a Specification in the IEC Quality Assessment
System for Electronic Components (IECQ) Part 3: Sectional
Specification - Qualification Approval First Edition; IECQ QC
680200
Quartz Crystal Units - a Specification in the IEC Quality Assessment
System for Electronic Components (IECQ) Part 3: Sectional
Specification - Qualification Approval Section 1: Blank Detail
Specification First Edition; IECQ QC 680201
61179
61180-1
61180-2
61181
61182-1
61182-7
61182-10
61183
61184
61185
61239
61240
61241-1-1
61241-1-2
61241-2-1
60961
60962
60963
60964
60965
Helical-Scan Digital Composite Video Cassette Recording System
Using 19 mm Magnetic Tape, Format D2 (NTSC, PAL, PAL-M)
First Edition
High-Voltage Test Techniques for Low-Voltage Equipment Part 1:
Definitions, Test and Procedure Requirements First Edition
High-Voltage Test Techniques for Low-Voltage Equipment - Part 2:
Test Equipment First Edition; CENELEC EN 61180-2: 1994
Impregnated Insulating Materials - Application of Dissolved Gas
Analysis (DGA) to Factory Tests on Electrical Equipment First
Edition; (CENELEC EN 61181:1993)
Printed Boards - Electronic Data Description and Transfer - Part 1:
Printed Board Description in Digital Form First Edition
Printed Boards - Electronic Data Description and Transfer - Part 7:
Bare Board Electric Test Information in Digital Form First Edition;
CENELEC EN 61182-7: 1995
Printed Boards - Electronic Data Description and Transfer - Part 10:
Electronic Data Hierarchy First Edition
Electroacoustics - Random-Incidence and Diffuse-Field Calibration
of Sound Level Meters First Edition; CENELEC EN 61183: 1994
Bayonet Lampholders Second Edition; Amendment 1-2000
Magnetic Oxide Cores (ETD-Cores) Intended for Use in Power
Supply Applications - Dimensions First Edition; (Amendment 11995)
Nuclear Instrumentation - Portable Gamma Radiation Meters and
Spectrometers Used for Prospecting - Definitions, Requirements and
Calibration First Edition; Replaces IEC 60460: 1974
Preparation of Outline Drawings of Surface-Mounted Devices (SMD)
for Frequency Control and Selection - General Rules First Edition
Electrical Apparatus for Use in the Presence of Combustible Dust Part 1-1: Electrical Apparatus Protected by Enclosures and Surface
Temperature Limitation - Specification for Apparatus Second Edition
Electrical Apparatus for Use in the Presence of Combustible Dust Part 1-2: Electrical Apparatus Protected by Enclosures and Surface
Temperature Limitation - Selection, Installation and Maintenance
Second Edition
Electrical Apparatus for Use in the Presence of Combustible Dust Part 2: Test Methods - Section 1: Methods for Determining the
Minimum Ignition Temperatures of Dust First Edition
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape on Type L Second Edition; (CENELEC EN
60961:1994)
Maintenance and Use Guide for Petroleum Lubricating Oils for
Steam Turbines First Edition
Specification for Unused Polybutenes First Edition
Design for Control Rooms of Nuclear Power Plants First Edition
Supplementary Control Points for Reactor Shutdown without Access
60966-1
60966-2-1
60966-2-2
60966-2-3
60966-2-4
60966-3
60966-3-2
60966-4
60966-2-5
60966-2-6
60966-3-1
60966-4-1
60968
60969
60970
to the Main Control Room First Edition
Radio Frequency and Coaxial Cable Assemblies - Part 1: General
Specification - General Requirements and Test Methods Second
Edition; IECQ QC 140000
Radio Frequency and Coaxial Cable Assemblies - Part 2-1: Sectional
Specification for Flexible Coaxial Cable Assemblies Edition 1.1;
Edition 1: 1991 Consolidated with Amendment 1: 1997
Radio Frequency and Coaxial Cable Assemblies Part 2-2: Blank
Detail Specification for Flexible Coaxial Cable Assemblies First
Edition; CENELEC EN 60966-2-2: 1994
Radio Frequency and Coaxial Cable Assemblies - Part 2-3: Detail
Specification for Flexible Coaxial Cable Assemblies First Edition
Radio Frequency and Coaxial Cable Assemblies - Part 2-4: Detail
Specification for Cable Assemblies for Radio and TV Receivers
(Frequency Range 0 to 3 000 MHz, IEC 60169-2 Connectors) First
Edition
Radio Frequency and Coaxial Cable Assemblies Part 3: Sectional
Specification for Semi-Flexible Coaxial Cable Assemblies First
Edition; CENELEC EN 60966-3: 1994
Radio Frequency and Coaxial Cable Assemblies - Part 3-2: Detail
Specification for Flexible Coaxial Cable Assemblies for GSM Use
(0,8 GHz - 1 GHz) First Edition
Radio Frequency and Coaxial Cable Assemblies Part 4: Sectional
Specification for Semi-Rigid Coaxial Cable Assemblies First Edition;
CENELEC EN 60966-4: 1994
Radio Frequency and Coaxial Cable Assemblies - Part 2-5: Detail
Specification for Cable Assemblies for Radio and TV Receivers Frequency Range 0 to 1 000 MHz, IEC 60169-2 Connectors First
Edition
Radio Frequency and Coaxial Cable Assemblies - Part 2-6: Detail
Specification for Cable Assemblies for Radio and TV Receivers Frequency Range 0 to 3 000 MHz, IEC 60169-24 Connectors First
Edition
Radio Frequency and Coaxial Cable Assemblies Part 3-1: Blank
Detail Specification for Semi-Flexible Coaxial Cable Assemblies
First Edition; CENELEC EN 60966-3-1: 1994
Radio Frequency and Coaxial Cable Assemblies Part 4-1: Blank
Detail Specification for Semi-Rigid Coaxial Cable Assemblies First
Edition; CENELEC EN 60966-4-1: 1994
Self-Ballasted Lamps for General Lighting Services - Safety
Requirements First Edition; Amendment 1: 04-1991; Amendment 2:
07-1999
Self-Ballasted Lamps for General Lighting Services - Performance
Requirements Edition 1.2; Edition 1:1988 Consolidated with
Amendments 1:1991 and 2:2000
Methods for Counting and Sizing Particles in Insulating Liquids First
60971
60972
60973
60974-1
60974-7
60974-11
60974-12
60976
TR 60977
60978
60979
60980
60981
60982
60983
60984
60986
60987
60988
60989
60990
Edition
Semiconductor Convertors Identification Code for Convertor
Connections First Edition
Classification and Interpretation of New Lighting Products First
Edition; (Amendment 1-1991)
Test Procedures for Germanium Gamma-Ray Detectors First Edition;
Replaces IEC 60430: 1973, IEC 60656: 1979 and IEC 60697: 1981
Arc Welding Equipment - Part 1: Welding Power Sources Edition
2.1; Cancels and Replaces ISO 700: 1982
Arc Welding Equipment - Part 7: Torches First Edition
Arc-Welding Equipment Part 11: Electrode Holders First Edition;
CENELEC EN 60974-11: 1995
Arc-Welding Equipment Part 12: Coupling Devices for Welding
Cables First Edition; CENELEC EN 60 974-12: 1995
Medical Electrical Equipment Medical Electron Accelerators Functional Performance Characteristics First Edition; Amendment 1:
07/2000
Medical Electrical Equipment - Medical Electron Accelerators in the
Range 1 MeV to 50 MeV - Guidelines for Functional Performance
Characteristics First Edition; Amendment 1: 04/2000
Maintenance and Use Guide for Triaryl Phosphate Ester Turbine
Control Fluids First Edition
Wires for Wire Wrapping Applications First Edition
Recommended Practices for Seismic Qualification of Electrical
Equipment of the Safety System for Nuclear Generating Stations First
Edition
Extra-Heavy Duty Rigid Steel Conduits for Electrical Installations
First Edition
Level Measuring Systems Utilizing Ionizing Radiation with
Continuous or Switching Output First Edition; Replaces IEC 60346:
1971
Miniature Lamps Second Edition; CENELEC EN 60983: 1996
Sleeves of Insulating Material for Live Working First Edition;
Corrigendum 03/1990; CENELEC EN 60984: 1992; Corrigendum 2:
05-2000
Short-Circuit Temperature Limits of Electric Cables with Rated
Voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
Second Edition
Programmed Digital Computers Important to Safety for Nuclear
Power Stations First Edition
Acoustic Monitoring Systems for Loose Parts Detection Characteristics, Design Criteria and Operational Procedures First
Edition
Separating Transformers, Autotransformers, Variable Transformers
and Reactors First Edition
Methods of Measurement of Touch Current and Protective Conductor
60991
60993
60994
60996
60997
60998-1
60998-2-1
60998-2-2
60998-2-3
60998-2-4
60998-2-5
60999-1
60999-2
61000-1-1
Current Second Edition
Resilient Mounting Rings for Small Motors - Mounting Dimensions
First Edition
Electrolyte for Vented Nickel-Cadmium Cells First Edition
Guide for Field Measurement of Vibrations and Pulsations in
Hydraulic Machines (Turbines, Storage Pumps and Pump-Turbines)
First Edition; Corrigendum 04-1997
Method for Verifying Accuracy of Tan Delta Measurements
Applicable to Capacitors First Edition
Determination of Polychlorinated Biphenyls (PCBs) in Mineral
Insulating Oils by Packed Column Gas Chromatography (GC) First
Edition
Connecting Devices for Low Voltage Circuits for Household and
Similar Purposes - Part 1: General Requirements Edition 1.1; Edition
1: 1990 Consolidated with Amendment 1: 1998
Connecting Devices for Low Voltage Circuits for Household and
Similar Purposes Part 2-1: Particular Requirements for Connecting
Devices as Separate Entities with Screw-Type Clamping Units First
Edition; CENELEC EN 60998-2-1: 1993
Connecting Devices for Low Voltage Circuits for Household and
Similar Purposes Part 2-2: Particular Requirements for Connecting
Devices as Separate Entities with Screwless-Type Clamping Units
First Edition; Replaces IEC 60685-2-2: 1983
Connecting Devices for Low Voltage Circuits for Household and
Similar Purposes Part 2-3: Particular Requirements for Connecting
Devices as Separate Entities with Insulation Piercing Clamping Units
First Edition; (CENELEC EN 60998-2-3: 1993)
Connecting Devices for Low-Voltage Circuits for Household and
Similar Purposes Part 2-4: Particular Requirements for Twist-On
Connecting Devices First Edition; Replaces IEC 60685-2-4: 1983
Connecting Devices for Low-Voltage Circuits for Household and
Similar Purposes - Part 2-5: Particular Requirements for Connecting
Boxes (Junction and/or Tapping) for Terminals or Connecting
Devices Edition 1.1; Consolidated with Amendment 1:1999
Connecting Devices - Electrical Copper Conductors - Safety
Requirements for Screw-Type and Screwless-Type Clamping Units Part 1: General Requirements and Particular Requirements for
Clamping Units for Conductors from 0,2 mm Squared up to 35 mm
Squared (I
Connecting Devices - Safety Requirements for Screw-Type and
Screwless-Type Clamping Units for Electrical Copper Conductors Part 2: Particular Requirements for Conductors from 35 mm2 up to
300 mm2 First Edition
Electromagnetic Compatibility (EMC) Part 1: General Section 1:
Application and Interpretation of Fundamental Definitions and Terms
First Edition
TS 61000-1-2
TR 61000-2-5
TR 61000-2-7
61000-2-10
61000-2-1
61000-2-2
61000-2-3
61000-2-4
TR 61000-2-6
61000-2-9
61000-2-11
61000-3-2
61000-3-3
Electromagnetic Compatibility (EMC) - Part 1-2: General Methodology for the Achievement of the Functional Safety of
Electrical and Electronic Equipment with Regard to Electromagnetic
Phenomena First Edition
Electromagnetic Compatibility (EMC) - Part 2: Environment Section 5: Classification of Electromagnetic Environments Basic
EMC Publication First Edition
Electromagnetic Compatibility (EMC) - Part 2: Environment Section 7: Low Frequency Magnetic Fields in Various Environments
First Edition
Electromagnetic Compatibility (EMC) - Part 2-10: Environment Description of HEMP Environment - Conducted Disturbance First
Edition
Electromagnetic Compatibility (EMC) Part 2: Environment Section
1: Description of the Environment - Electromagnetic Environment for
Low-Frequency Conducted Disturbances and Signalling in Public
Power Supply Systems First Edition
Electromagnetic Compatibility (EMC) Part 2: Environment Section
2: Compatibility Levels for Low-Frequency Conducted Disturbances
and Signalling in Public Low-Voltage Power Supply Systems First
Edition; (CENELEC ENV 61000-2-2: 1993)
Electromagnetic Compatibility (EMC) Part 2: Environment Section
3: Description of the Environment - Radiated and Non-NetworkFrequency-Related Conducted Phenomena First Edition
Electromagnetic Compatibility (EMC) - Part 2: Environment Section 4: Compatibility Levels in Industrial Plants for LowFrequency Conducted Disturbances First Edition; Corrigendum
08/1994; CENELEC EN 61000-2-4: 1994
Electromagnetic Compatibility (EMC) - Part 2: Environment Section 6: Assessment of the Emission Levels in the Power Supply of
Industrial Plants as Regards Low-Frequency Conducted Disturbances
First Edition
Electromagnetic Compatibility (EMC) - Part 2: Environment Section 9: Description of HEMP Environment - Radiated Disturbance
Basic EMC Publication First Edition CENELEC EN 61 000-2-9:
1996
Electromagnetic Compatibility (EMC) - Part 2-11: Environment Classification of HEMP Environments First Edition
Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for
Harmonic Current Emissions (Equipment Input Current Less Than or
Equal to 16 A per Phase) Edition 2.1; Edition 2:2000 Consolidated
with Amendment 1:2001
Electromagnetic Compatibility (EMC) - Part 3-3: Limits - Limitation
of Voltage Changes, Voltage Fluctuations and Flicker in Public LowVoltage Supply Systems, for Equipment with Rated Current Less
Than or Equal to 16 A Per Phase and Not Subject to Conditio
TR 61000-3-4
61000-3-5
TR 61000-3-6
TR 61000-3-7
61000-3-8
61000-4-1
61000-4-14
61000-4-15
61000-3-11
61000-4-2
61000-4-3
61000-4-4
61000-4-5
61000-4-6
Electromagnetic Compatibility (EMC) - Part 3-4: Limits - Limitation
of Emission of Harmonic Currents in Low-Voltage Power Supply
Systems for Equipment with Rated Current Greater Than 16 A First
Edition
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 5:
Limitation of Voltage Fluctuations and Flicker in Low-Voltage
Power Supply Systems for Equipment with Rated Current Greater
Than 16 A First Edition
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 6:
Assessment of Emission Limits for Distorting Loads in MV and HV
Power Systems - Basic EMC Publication First Edition
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 7:
Assessment of Emission Limits for Fluctuating Loads in MV and HV
Power Systems - Basic EMC Publication First Edition
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 8:
Signalling on Low-Voltage Electrical Installations - Emission Levels,
Frequency Bands and Electromagnetic Disturbance Levels First
Edition
Electromagnetic Compatibility (EMC) - Part 4-1: Testing and
Measurement Techniques - Overview of IEC 61000-4 Series Second
Edition
Electromagnetic Compatibility (EMC) - Part 4-14: Testing and
Measurement Techniques - Voltage Fluctuation Immunity Test First
Edition; Amendment 1:07-2001
Electromagnetic Compatibility (EMC) - Part 4: Testing and
Measurement Techniques - Section 15: Flickermeter - Functional and
Design Specifications First Edition
Electomagnetic Compatibility (EMC) - Part 3-11: Limits - Limitation
of Voltage Changes, Voltage Fluctuations and Flicker in Public LowVoltage Supply Systems - Equipment with Rated Current Less Than
or Equal to 75 A and Subject to Conditional Connection Fi
Electromagnetic Compatibility (EMC) - Part 4-2: Testing and
Measurement Techniques - Electrostatic Discharge Immunity Test
Edition 1.2; Edition 1:1995 Consolidated with Amendments 1:1998
and 2:2000
Electromagnetic Compatibility (EMC) - Part 4-3: Testing and
Measurement Techniques - Radiated, Radio-Frequency,
Electromagnetic Field Immunity Test Edition 1.2; Edition 1:1995
Consolidated with Amendments 1:1998 and 2:2000
Electromagnetic Compatibility (EMC) - Part 4-4: Testing and
Measurement Techniques - Electrical Fast Transient/Burst Immunity
Test First Edition; Amendment 1 - 11/2000; Amendment 2 - 7/2001
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and
Measurement Techniques - Surge Immunity Test Edition 1.1; Edition
1:1995 Consolidated with Amendment 1:2000
Electromagnetic Compatibility (EMC) - Part 4-6: Testing and
61000-4-7
61000-4-8
61000-4-9
61000-4-10
61000-4-11
61000-4-12
61000-4-16
61000-4-17
61000-4-27
TR 61000-5-1
TR 61000-5-2
61000-4-23
61000-4-24
Measurement Techniques - Immunity to Conducted Disturbances,
Induced by Radio-Frequency Fields Edition 1.1; Edition 1:1996
Consolidated with Amendment 1:2000
Electromagnetic Compatibility (EMC) Part 4: Testing and
Measurement Techniques Section 7: General Guide on Harmonics
and Interharmonics Measurements and Instrumentation, for Power
Supply Systems and Equipment Connected Thereto First Edition;
Corrigendum-19
Electromagnetic Compatibility (EMC) - Part 4-8: Testing and
Measurement Techniques - Power Frequency Magnetic Field
Immunity Test Edition 1.1; Edition 1: 1993 Consolidated with
Amendment 1: 2000
Electromagnetic Compatibility (EMC) - Part 4-9: Testing and
Measurement Techniques - Pulse Magnetic Field Immunity Test
Edition 1.1; Edition 1: 1993 Consolidated with Amendment 1: 2000
Electromagnetic Compatibility (EMC) - Part 4-10: Testing and
Measurement Techniques - Damped Oscillatory Magnetic Field
Immunity Test Edition 1.1; Edition 1: 1993 Consolidated with
Amendment 1: 2000
Electromagnetic Compatibility (EMC) - Part 4-11: Testing and
Measurement Techniques - Voltage Dips, Short Interruptions and
Voltage Variations Immunity Tests Edition 1.1; Edition 1: 1994
Consolidated with Amendment 1: 2000
Electromagnetic Compatibility (EMC) Part 4-12: Testing and
Measurement Techniques - Oscillatory Waves Immunity Test Edition
1.1; Edition 1:1995 Consolidated with Amendment 1:2000
Electromagnetic Compatibility (EMC) - Part 4-16: Testing and
Measurement Techniques - Test for Immunity to Conducted,
Common Mode Disturbances in the Frequency Range 0 Hz to 150
kHz First Edition; Amendment 1: 07/2001
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and
Measurement Techniques - Ripple on d.c. Input Power Port Immunity
Test First Edition; Amendment 1-07/2001
Electromagnetic Compatibility (EMC) - Part 4-27: Testing and
Measurement Techniques - Unbalance, Immunity Test First Edition
Electromagnetic Compatibility (EMC) - Part 5: Installation and
Mitigation Guidelines - Section 1: General Considerations Basic
EMC Publication First Edition
Electromagnetic Compatibility (EMC) - Part 5: Installation and
Mitigation Guidelines - Section 2: Earthing and Cabling First Edition
Electromagnetic Compatibility (EMC) - Part 4-23: Testing and
Measurement Techniques - Test Methods for Protective Devices for
HEMP and Other Radiated Disturbances First Edition
Electromagnetic Compatibility (EMC) - Part 4: Testing and
Measurement Techniques - Section 24: Test Methods for Protective
Devices for HEMP Conducted Disturbance Basic EMC Publication
61000-4-28
61000-4-29
TR 61000-5-3
TR 61000-5-4
61000-5-5
61000-5-7
61000-6-1
61000-6-2
61000-6-4
TS 61000-6-5
61003-1
61005
61006
61007
61008-1
First Edition
Electromagnetic Compatibility (EMC) - Part 4-28: Testing and
Measurement Techniques - Variation of Power Frequency, Immunity
Test First Edition; Amendment 1-07/2001
Electromagnetic Compatibility (EMC) - Part 4-29: Testing and
Measurement Techniques - Voltage Dips, Short Interruptions and
Voltage Variations on d.c. Input Power Port Immunity Tests First
Edition
Electromagnetic Compatibility (EMC) - Part 5-3: Installation and
Mitigation Guidelines - HEMP Protection Concepts First Edition
Electromagnetic Compatibility (EMC) - Part 5: Installation and
Mitigation Guidelines - Section 4: Immunity to HEMP Specifications for Protective Devices Against HEMP Radiated
Disturbance - Basic EMC Publication First Edition
Electromagnetic Compatibility (EMC) Part 5: Installation and
Mitigation Guidelines Section 5: Specification of Protective Devices
for HEMP Conducted Disturbance - Basic EMC Publication First
Edition CENELEC EN 61 000-5-5: 1996
Electromagnetic Compatibility (EMC) - Part 5-7: Installation and
Mitigation Guidelines - Degrees of Protection Provided by
Enclosures Against Electromagnetic Disturbances (EM Code) First
Edition
Electromagnetic Compatibility (EMC) - Part 6: Generic Standards Section 1: Immunity for Residential, Commercial and LightIndustrial Environments First Edition
Electromagnetic Compatibility (EMC) - Part 6-2: Generic Standards Immunity for Industrial Environments First Edition
Electromagnetic Compatability (EMC) - Part 6: Generic Standards Section 4: Emission Standard for Industrial Environments First
Edition
Electromagnetic Compatibility (EMC) - Part 6-5: Generic Standards Immunity for Power Station and Substation Environments First
Edition
Industrial-Process Control Systems - Instruments with Analogue
Inputs and Two- or Multi-State Outputs Part 1: Methods of
Evaluating the Performance First Edition; CENELEC EN 61003-1:
1993
Portable Neutron Ambient Dose Equivalent Ratemeters for Use in
Radiation Protection First Edition
Methods of Test for the Determination of the Glass Transition
Temperature of Electrical Insulating Materials First Edition;
(CENELEC EN 61006:1993)
Transformers and Inductors for Use in Electronic and
Telecommunication Equipment - Measuring Methods and Test
Procedures Second Edition
Residual Current Operated Circuit-Breakers without Integral
61009-1
61010-1
61012
61008-2-1
61008-2-2
61009-2-1
61009-2-2
61010-2-010
61010-2-020
61010-2-031
61010-2-032
61010-2-041
Overcurrent Protection for Household and Similar Uses (RCCBs) Part 1: General Rules Second Edition
Residual Current Operated Circuit-Breakers with Integral
Overcurrent Protection for Household and Similar Uses (RCBOs)
Part 1: General Rules Second Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General Requirements Second
Edition
Filters for the Measurement of Audible Sound in the Presence of
Ultrasound First Edition
Residual Current Operated Circuit-Breakers without Integral
Overcurrent Protection for Household and Similar Uses (RCCB'S)
Part 2-1: Applicability of the General Rules to RCCB's Functionally
Independent of Line Voltage First Edition; (CENELEC EN 61008-21:
Residual Current Operated Circuit-Breakers without Integral
Overcurrent Protection for Household and Similar Uses (RCCB'S)
Part 2-2: Applicability of the General Rules to RCCB's Functionally
Dependent on Line Voltage First Edition
Residual Current Operated Circuit-Breakers with Integral
Overcurrent Protection for Household and Similar Uses (RCBO's)
Part 2-1: Applicability of the General Rules to RCBO's Functionally
Independent of Line Voltage First Edition; CENELEC EN 61009-21: 199
Residual Current Operated Circuit-Breakers with Integral
Overcurrent Protection for Household and Similar Uses (RCBO's)
Part 2-2: Applicability of the General Rules to RCBO's Functionally
Dependent on Line Voltage First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-010: Particular Requirements for
Laboratory Equipment for the Heating of Materials First Edition;
(Amendment 1-1996)
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-020: Particular Requirements for
Laboratory Centrifuges First Edition; Amendment 1-1996
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-031: Particular Requirements for
Hand- Held PROBE ASSEMBLIES for Electrical Measurement and
Test First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-032: Particular Requirements
for Hand-Held Current Clamps for Electrical Measurement and Test
First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-041: Particular Requirements for
Autoclaves Using Steam for the Treatment of Medical Materials, and
61010-2-042
61010-2-043
61010-2-045
61014
61015
61016
61017-1
61018
61010-2-051
61010-2-061
61010-2-081
TR 61010-3
TR 61010-3-1
TR 61010-3-010
for Laboratory Processes First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-042: Particular Requirements
for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of
Medical Materials, and for Laboratory Processes First Editio
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-043: Particular Requirements
for Dry Heat Sterilizers Using Either Hot Air or Hot Inert Gas for the
Treatment of Medical Materials, and for Laboratory Proces
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-045: Particular Requirements
for Washer disinfectors Used in Medical, Pharmaceutical, Veterinary
and Laboratory Fields First Edition
Programmes for Reliability Growth First Edition
Brush-Holders for Electrical Machines Guide to the Measurement of
the Static Thrust Applied to Brushes First Edition
Helical-Scan Digital Component Video Cassette Recording System
Using 19 mm Magnetic Tape (Format D-1) First Edition;
Amendment 1: 02-1999
Portable, Transportable or Installed X or Gamma Radiation
Ratemeters for Environmental Monitoring Part 1: Ratemeters First
Edition
High Range Beta and Photon Dose and Dose Rate Portable
Instruments for Emergency Radiation Protection Purposes First
Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-051: Particular Requirements for
Laboratory Equipment for Mixing and Stirring First Edition;
CENELEC EN 61 010-2-051: 1995
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-061: Particular Requirements for
Laboratory Atomic Spectrometers with Thermal Atomization and
Ionization First Edition; (CENELEC EN 61 010-2-061: 1996)
Safety Requirements for Electrical Equipment for Electrical
Equipment for Measurement, Control, and Laboratory Use Part 2081: Particular Requirements for Automatic and Semi-Automatic
Laboratory Equipment for Analysis and Other Purposes First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3: Protocol for the Preparation of
Conformity Verification Reports for the IEC 61010 Series First
Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-1: Conformity Verification
Report for IEC 61010-1 First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-010: Conformity Verification
TR 61010-3-020
TR 61010-3-032
TR 61010-3-041
TR 61010-3-042
TR 61010-3-043
61019-1-2
61019-2
61019-3
61020-1
TR 61010-3-051
TR 61010-3-061
61017-2
60759
60760
Report for IEC 61010-2-010, Particular Requirements for Laboratory
Equipment for the Heating of Materials First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-020: Conformity Verification
Report for IEC 61010-2-020: 1992 Particular Requirements for
Laboratory Centrifuges First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-032: Conformity Verification
Report for IEC 61010-2-032: 1994, Particular Requirements for
Hand-Held Current Clamps for Electrical Measurement and Test First
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-041: Conformity Verification
Report for IEC 61010-2-041: 1995, Particular Requirements for
Autoclaves Using Steam for the Treatment of Medical Materials, and
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-042: Conformity Verification
Report for IEC 61010-2-042: 1997, Particular Requirements for
Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Me
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-043: Conformity Verification
Report for IEC 61010-2-043:1997 - Particular Requirements for Dry
Heat Sterilizers Using Either Hot Air or Hot Inert Gas for Tre
Surface Acoustic Wave (SAW) Resonators Part 1: General
Information, Standard Values and Test Conditions Section 2: Test
Conditions First Edition
Surface Acoustic Wave (SAW) Resonators - Part 2: Guide to the Use
First Edition
Surface Acoustic Wave (SAW) Resonators Part 3: Standard Outlines
and Lead Connections First Edition
Electromechanical Switches for Use in Electronic Equipment Part 1:
Generic Specification; (IECQ QC 960000)
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-051: Conformity Verification
Report for IEC 61010-2-051, Particular Requirements for Laboratory
Equipment for Mixing and Stirring First Edition
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 3-061: Conformity Verification
Report for IEC 61010-2-061, Particular Requirements for Laboratory
Atomic Spectrometers with Thermal Atomization and Ionization
Radiation Protection Instrumentation - Portable, Transportable or
Installed Equipment to Measure X or Gamma Radiation for
Environmental Monitoring - Part 2: Integrating Assemblies First
Edition
Standard Test Procedures for Semiconductor X-Ray Energy
Spectrometers First Edition; (Amendment 1-1991)
Flat, Quick-Connect Terminations Second Edition; (Amendment 1-
60761-1
60761-2
60761-3
60761-4
60761-5
60761-6
60763-1
60763-2
60763-3-1
60767
60768
60770-1
60770-2
60771
60772
60773
60774-1
1993)
Equipment for Continuously Monitoring Radioactivity in Gaseous
Effluents Part 1: General Requirements First Edition
Equipment for Continuously Monitoring Radioactivity in Gaseous
Effluents Part 2: Specific Requirements for Aerosol Effluent
Monitors First Edition
Equipment for Continuously Monitoring Radioactivity in Gaseous
Effluents Part 3: Specific Requirements for Noble Gas Effluent
Monitors First Edition
Equipment for Continuously Monitoring Radioactivity in Gaseous
Effluents Part 4: Specific Requirements for Iodine Monitors First
Edition
Equipment for Continuously Monitoring Radioactivity in Gaseous
Effluents Part 5: Specific Requirements for Tritium Effluent Monitors
First Edition
Equipment for Continuously Monitoring Radioactivity in Gaseous
Effluents Part 6: Specific Requirements for Transuranic Aerosol
Effluent Monitors First Edition
Specification for Laminated Pressboard Part 1: Definitions,
Classification and General Requirements First Edition; CENELEC
EN 60 763-1: 1996
Specification for Laminated Pressboard Part 2: Methods of Test First
Edition; CENELEC EN 60 763-2: 1996
Specification for Laminated Pressboard Part 3: Specifications for
Individual Materials Sheet 1: Specifications for Laminated
Precompressed Board Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2 First
Edition; CENELEC EN 60 763-3-1: 1996
Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in)
Magnetic Tape on Type Beta Format First Edition
Process Stream Radiation Monitoring Equipment in Light Water
Nuclear Reactors for Normal Operating and Incident Conditions First
Edition
Transmitters for Use in Industrial-Process Control Systems - Part 1:
Methods for Performance Evaluation First Edition; Should be Read in
Conjunction with IEC 61298 Parts 1 Through 4
Transmitters for Use in Industrial-Process Control Systems Part 2:
Guidance for Inspection and Routine Testing First Edition
Calculation of Maximum Overall Diameter of Cables and
Specification of Minimum Tensile Strength of Suspension Strand for
Low-Frequency Cables with Polyolefin Insulation and Moisture
Barrier Polyolefin Sheath First Edition
Electrical Penetration Assemblies in Containment Structures for
Nuclear Power Generating Stations First Edition
Test Methods and Apparatus for the Measurement of the Operational
Characteristics of Brushes First Edition
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
60774-2
60774-3
60775
60776
60777
60778
60779
60780
60781
60782
60783
60784
60785
60786
60787
60788
60789
60791
60792-1
60793-1-1
60793-1-21
60793-1-22
60793-1-30
Magnetic Tape on Type VHS Part 1: VHS and Compact VHS Video
Cassette System First Edition; (CENELEC EN 60774-1: 1994)
Helican-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape on Type VHS - Part 2: FM Audio Recording First
Edition; Replaces IEC 61054
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in)
Magnetic Tape on Type VHS Part 3: S-VHS Second Edition;
(CENELEC EN 60774-3: 1993)
Real-Time BASIC for CAMAC First Edition
Expression of the Properties of Logic Analyzers First Edition
Terminology, Quantities and Units Concerning Radiation Protection
First Edition
Brush-Holders for Slip-Rings Group R - Type RA First Edition
Test Methods for Electro-Slag Remelting Furnaces First Edition
Nuclear Power Plants - Electrical Equipment of the Safety System Qualification Second Edition
Application Guide for Calculation of Short-Circuit Currents in LowVoltage Radial Systems First Edition
Measurements of Ultrasonic Magnetostrictive Transducers First
Edition
Wiring and Connectors for Electric Road Vehicles First Edition
Instrumentation for Electric Road Vehicles First Edition
Rotating Machines for Electric Road Vehicles First Edition
Controllers for Electric Road Vehicles First Edition
Application Guide for the Selection of Fuse-Links of High-Voltage
Fuses for Transformer Circuit Applications First Edition;
Amendment 1-1985
Medical Radiology - Terminology First Edition
Characteristics and Test Conditions of Radionuclide Imaging
Devices; Anger Type Gamma Cameras Second Edition; CENELEC
EN 60789:1993; AS/NZS 4378: 1996
Performance Evaluation of Insulation Systems Based on Service
Experience and Functional Tests First Edition
Multi-Factor Functional Testing of Electrical Insulation Systems Part
1: Test Procedures First Edition
Optical Fibres - Part 1-1: Generic Specification - General Edition 1.1;
Edition 1: 1995 Consolidated with Amendment 1: 1998
Optical Fibres - Part 1-21: Measurement Methods and Test
Procedures - Coating Geometry First Edition; Together with the
Other Standards in the IEC 60793-1-2X Series, Cancels and Replaces
the First Edition of IEC 60793-1-2
Optical Fibres - Part 1-22: Measurement Methods and Test
Procedures - Length Measurement First Edition; Together with the
Other Standards in the IEC 60793-1-2X Series, Cancels and Replaces
the First Edition of IEC 60793-1-2
Optical Fibres - Part 1-30: Measurement Methods and Test
60793-1-31
60793-1-32
60793-1-33
60793-1-34
60793-1-40
60793-1-41
60793-1-42
60793-1-43
60793-1-44
60793-1-45
60793-1-46
60793-1-47
60793-1-50
60793-1-51
60793-1-52
60793-1-53
60793-2
60794-1-1
60794-1-2
Procedures - Fibre Proof Test First Edition
Optical Fibres - Part 1-31: Measurement Methods and Test
Procedures - Tensile Strength First Edition
Optical Fibres - Part 1-32: Measurement Methods and Test
Procedures - Coating Strippability First Edition; Together with the
Other Standards in the IEC 60793-1-3X Series, Cancels and Replaces
the Second Edition of IEC 60793-1-3
Optical Fibres - Part 1-33: Measurement Methods and Test
Procedures - Stress Corrosion Susceptibility First Edition; Together
with the Other Standards in the IEC 60793-1-3X Series, Cancels and
Replaces the Second Edition of IEC 60793-1-3
Optical Fibres - Part 1-34: Measurement Methods and Test
Procedures - Fibre Curl First Edition
Optical Fibres - Part 1-40: Measurement and Test Procedures Attenuation First Edition
Optical Fibres - Part 1-41: Measurement Methods and Test
Procedures - Bandwidth First Edition
Optical Fibres - Part 1-42: Measurement Methods and Test
Procedures - Chromatic Dispersion First Edition
Optical Fibres - Part 1-43: Measurement Methods and Test
Procedures - Numerical Aperture First Edition
Optical Fibres - Part 1-44: Measurement Methods and Test
Procedures - Cut-Off Wavelength First Edition
Optical Fibres - Part 1-45: Measurement Methods and Test
Procedures - Mode Field Diameter First Edition; Together with the
Other Standards in the IEC 60793-1-4X Series, Replaces the Second
Edition of IEC 60793-1-4
Optical Fibres - Part 1-46: Mesurement Methods and Test Procedures
- Monitoring of Changes in Optical Transmittance First Edition
Optical Fibres - Part 1-47: Measurement Methods and Test
Procedures - Macrobending Loss First Edition
Optical Fibres - Part 1-50: Measurement Methods and Test
Procedures - Damp Heat (Steady State) First Edition
Optical Fibres - Part 1-51: Measurement Methods and Test
Procedures - Dry Heat First Edition; Together with the Other
Standards in the IEC 60793-1-5X Series, Cancels and Replaces the
First Edition of IEC 60793-1-5
Optical Fibres - Part 1-52: Measurement Methods and Test
Procedures - Change of Temperature First Edition
Optical Fibres - Part 1-53: Measurement Methods and Test
Procedures - Water Immersion First Edition
Optical Fibres - Part 2: Product Specifications Edition 4.1; Edition
4:1998 Consolidated with Amendment 1:2001
Optical Fibre Cables - Part 1-1: Generic Specification - General
Second Edition
Optical Fibre Cables - Part 1-2: Generic Specification - Basic Optical
60794-2
60794-3
60794-4-1
60795
60796-1
60796-2
60796-3
60797
60798
60799
60800
60804
60805
60806
60807-9
60803
60807-1
60807-2
Cable Test Procedures First Edition
Optical Fibre Cables - Part 2: Product Specification (Indoor Cable)
Edition 2.1; Edition 2:1989 Consolidated with Amendment 1:1998
Optical Fibre Cables - Part 3: Duct, Buried and Aerial Cables Sectional Specification Second Edition
Optical Fibre Cables - Part 4-1: Aerial Optical Cables for HighVoltage Power Lines First Edition
Test Method for Evaluating Thermal Endurance of Flexible Sheet
Materials Using the Wrapped Tube Method First Edition
Microprocessor System BUS - 8-Bit and 16-Bit Data (MULTIBUS 1)
Part 1: Functional Description with Electrical and Timing
Specifications First Edition
Microprocessor System BUS - 8-Bit and 16-Bit Data (MULTIBUS 1)
Part 2: Mechanical and Pin Descriptions for the System Bus
Configuration, with Edge Connectors (Direct) First Edition
Microprocessor System BUS I, 8-Bit and 16-Bit Data Part 3:
Mechanical and Pin Descriptions for the Eurocard Configuration with
Pin and Socket (Indirect) Connectors First Edition
Residual Strength of String Insulator Units of Glass or Ceramic
Material for Overhead Lines After Mechanical Damage of the
Dielectric First Edition
Copper Alloy Used for Equipment Wires First Edition
Electrical Accessories - Cord Sets and Interconnection Cord Sets
Second Edition
Heating Cables with a Rated Voltage of 300/500 V for Comfort
Heating and Prevention of Ice Formation Second Edition
Integrating-Averaging Sound Level Meters Second Edition
Guide for Commissioning, Operation and Maintenance of Storage
Pumps and of Pump- Turbines Operating as Pumps First Edition
Determination of the Maximum Symmetrical Radiation Field from a
Rotating Anode X-Ray Tube for Medical Diagnosis First Edition
Rectangular Connectors for Frequencies Below 3 MHz Part 9: Detail
Specification for a Range of Peritelevision Connectors First Edition
Recommended Dimensions for Hexagonal and Square Crimping-Die
Cavities, Indentors, Gauges, Outer Conductor Crimp Sleeves and
Centre Contact Crimp Barrels for R.F. Cables and Connectors First
Edition; (Amendment 1-1995)
Rectangular Connectors for Frequencies Below 3 MHz Part 1:
Generic Specification - General Requirements and Guide for the
Preparation of Detail Specifications for Connectors with Assessed
Quality Second Edition; (IECQ QC 030000)
Rectangular Connectors for Frequencies Below 3 MHz - Part 2:
Detail Specification for a Range of Connectors, with Assessed
Quality, with Trapezoidal Shaped Metal Shells and Round Contacts Fixed Solder Contact Types Second Edition; (IECQ QC 030000 XX
0001
60807-3
60807-6
60807-7
60807-8
60808
60809
60810
60811-1-1
60811-1-2
60811-1-3
60812
60814
60815
60816
60811-1-4
Rectangular Connectors for Frequencies Below 3 MHz Part 3: Detail
Specification for a Range of Connectors with Trapezoidal Shaped
Metal Shells and Round Contacts - Removable Crimp Contact Types
with Closed Crimp Barrels, Rear Insertion/Rear Extraction Firs
Rectangular Connectors for Frequencies Below 3 MHz Part 6: Detail
Specification for a Range of Rectangular Connectors with a Size 20
(7.5 A) Round Contacts Having Polarized Guides - Fixed Solder
Contact Types First Edition
Rectangular Connectors for Frequencies Below 3 MHz Part 7: Detail
Specification for a Range of Connectors with Polarized Guides or
Jackscrews and Size 16 (13 A) Round Contacts - Removable Crimp
Contact Types with Closed Crimp Barrels, Rear Insertion/Front
Rectangular Connectors for Frequencies Below 3 MHz Part 8: Detail
Specification for Connectors, Four-Signal Contacts and Earthing
Contacts for Cable Screen First Edition
Complementary Instrumentation for Counting Ratemeters
Characteristics and Test Methods First Edition
Filament Lamps for Road Vehicles - Dimensional, Electrical and
Luminous Requirements Second Edition; Amendment 1-1996;
CENELEC EN 60809: 1995
Lamps for Road Vehicles - Performance Requirements Second
Edition; Amendment 1-1994; CENELEC EN 60810:1994
Common Test Methods for Insulating and Sheathing Materials of
Electric and Optical Cables - Part 1-1: Methods for General
Application - Measurement of Thickness and Overall Dimensions Tests for Determining the Mechanical Properties Edition 2.1; Edition
2
Common Test Methods for Insulating and Sheathing Materials of
Electric Cables Part 1: Methods for General Application Section Two
- Thermal Ageing Methods First Edition; Corrigendum: 05/1986;
Amendment 1: 10/1989; Amendment 2: 07/2000
Common Test Methods for Insulating and Sheathing Materials of
Electric and Optical Cables - Part 1-3: General Application - Section
3: Methods for Determining the Density - Water Absorption Tests Shrinkage Test Edition 2.1; Edition 2:1993 Consolidated wi
Analysis Techniques for System Reliability - Procedure for Failure
Mode and Effects Analysis (FMEA) First Edition
Insulating Liquids - Oil-Impregnated Paper and Pressboard Determination of Water by Automatic Coulometric Karl Fischer
Titration Second Edition
Guide for the Selection of Insulators in Respect of Polluted
Conditions First Edition
Guide on Methods of Measurement of Short Duration Transients on
Low Voltage Power and Signal Lines First Edition
Common Test Methods for Insulating and Sheathing Materials of
Electric Cables Part 1: Methods for General Application Section Four
60811-2-1
60811-3-1
60811-3-2
60819-1
60819-2
60819-3-1
60819-3-2
60819-3-3
60822
60811-4-1
60811-4-2
60811-5-1
- Tests at Low Temperature First Edition; Corrigendum-05/1986;
Amendment 1-1993; CENELEC EN 60811-1-4: 1995; Amendment
2:07-2
Common Test Methods for Insulating and Sheathing Materials of
Electric and Optical Cables - Part 2-1: Methods Specific to
Elastomeric Compounds - Ozone Resistance, Hot Set and Mineral Oil
Immersion Tests Second Edition; Amendment 1:07-2001
Common Test Methods for Insulating and Sheathing Materials of
Electric and Optical Cables - Part 3-1: Methods Specific to PVC
Compounds - Pressure Test At High Temperature - Tests for
Resistance to Cracking First Edition; Corrigendum:05-1986;
Amendment:1-1
Common Test Methods for Insulating and Sheathing Materials of
Electric Cables Part 3: Methods Specific to PVC Compounds Section
Two - Loss of Mass Test - Thermal Stability Test First Edition;
Corrigendum-05/1986; Amendment 1-1993; CENELEC EN 60811-32: 199
Non-Cellulosic Papers for Electrical Purposes Part 1: Definitions and
General Requirements Second Edition; (CENELEC EN 60819-1:
1995) (Amendment 1-1996)
Non-Cellulosic Papers for Electrical Purposes - Part 2: Methods of
Test First Edition
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specification
for Individual Materials - Sheet 1: Filled Glass Paper First Edition
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 2: Hybrid Inorganic-Organic Paper
First Edition
Specification for Non- Cellulosic Papers for Electrical Purposes Part
3: Specifications for Individual Materials Sheet 3: Unfilled Aramid
(Aromatic Polyamide) Papers First Edition
IEC 822 VSB Parallel Sub-System Bus of the IEC 821 VME Bus
First Edition
Common Test Methods for Insulating and Sheathing Materials of
Electric Cables Part 4: Methods Specific to Polyethylene and
Polypropylene Compounds Section One - Resistance to
Environmental Stress Cracking - Wrapping Test After Thermal
Ageing in Air - Measu
Common Test Methods for Insulating and Sheathing Materials of
Electric Cables Part 4: Methods Specific to Polyethylene and
Polypropylene Compounds Section Two - Elongation at Break After
Pre-Conditioning - Wrapping Test After Pre-Conditioning Wrapping Te
Common Test Methods for Insulating and Sheathing Materials of
Electric Cables Part 5: Methods Specific to Filling Compounds
Section One - Drop-Point - Separation of Oil - Lower Temperature
Brittleness - Total Acid Number - Absence of Corrosive Components
60823
60824
60825-1
60819-3-4
60825-2
TR 60825-3
60825-4
TR 60825-5
TS 60825-6
TR 60825-8
TR 60825-9
60826
60828
60830
60831-1
60831-2
60832
60833
60835-1-3
60835-1-4
Microprocessor System Bus (VMSbus) - Serial Sub-System Bus of
the IEC 821 Bus (VMEbus) First Edition
Terminology Related to Microprocessors First Edition
Safety of Laser Products - Part 1: Equipment Classification,
Requirements and User's Guide Edition 1.2; Edition 1:1993
Consolidated with Amendments 1:1997 and 2:2001
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 4: Aramid Fibre Paper Containing
Not More Than 50 % of Mica Particles First Edition
Safety of Laser Products - Part 2: Safety of Optical Fibre
Communication Systems Second Edition
Safety of Laser Products - Part 3: Guidance for Laser Displays and
Shows First Edition
Safety of Laser Products - Part 4: Laser Guards First Edition
Safety of Laser Products - Part 5: Manufacturer's Checklist for IEC
60825-1 First Edition
Saftey of Laser Products - Part 6: Saftey of Products with Optical
Sources, Exclusively Used for Visidle Information Transmission to
the Human Eye First Edition
Safety of Laser Products - Part 8: Guidelines for the Safe Use of
Medical Laser Equipment First Edition
Safety of Laser Products - Part 9: Compilation of Maximum
Permissible Exposure to Incoherent Optical Radiation First Edition
Loading and Strength of Overhead Transmission Lines Second
Edition; Corrigendum-09/1991
Pin Allocations for Microprocessor Systems Using the IEC 603-2
Connector First Edition
Test Methods for Multichannel Analyzers as Multichannel Scalers
First Edition
Shunt Power Capacitors of the Self-Healing Type for A.C. Systems
Having a Rated Voltage up to and Including 1 000 V - Part 1: General
- Performance, Testing and Rating - Safety Requirements - Guide for
Installation and Operation Second Edition; CENELEC EN
Shunt Power Capacitors of the Self-Healing Type for A.C. Systems
Having a Rated Voltage up to and Including 1 000 V Part 2: Ageing
Test, Self-Healing Test and Destruction Test Second Edition;
CENELEC EN 60831-2: 1996
Insulating Poles (Insulating Sticks) and Universal Tool Attachments
(Fittings) for Live Working First Edition Corrigendum: 05-2000
Measurement of Power-Frequency Electric Fields First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 1: Measurements Common to
Terrestrial Radio-Relay Systems and Satellite Earth Stations Section
3: Transmission Characteristics First Edition; (Amendment 1-1995)
Methods of Measurement for Equipment Used in Digital Microwave
60835-2-1
60835-2-2
60836
60838-1
60838-2-1
60839-1-1
60835-2-3
60835-2-4
60835-2-5
60835-2-6
60835-2-7
60835-2-8
60835-2-9
Radio Transmission Systems Part 1: Measurements Common to
Terrestrial Radio-Relay Systems and Satellite Earth Stations Section
4: Transmission Performance First Edition; (Amendment 1-1995)
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 2: Measurements on Terrestrial
Radio-Relay Systems Section One - General First Edition;
(CENELEC EN 60835-2-1: 1992)
Methods of Measurement for Equipment Used in Digital Microwave
Transmission Systems - Part 2: Measurements on Terrestrial RadioRelay Systems - Section 2: Antenna First Edition
Specifications for Silicone Liquids for Electrical Purposes First
Edition; CENELEC HD 565 S1: 1993; Corrigendum-12/1993
Miscellaneous Lampholders - Part 1: General Requirements and Tests
Third Edition; Amendment 1: 10-1999
Miscellaneous Lampholders - Part 2: Particular Requirements Section 1: Lampholders S14 First Edition; Amendment 1- 1998
Alarm Systems Part 1: General Requirements Section One - General
First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 2: Measurements on Terrestrial
Radio-Relay Systems Section 3: RF Branching Networks First
Edition; CENELEC EN 60835-2-3: 1993
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 2-4: Measurements on Terrestrial
Radio-Relay Systems - Transmitter/Receiver Including
Modulator/Demodulator Edition 1.1; Edition 1: 1993 Consolidated
with Amen
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 2: Measurements on Terrestrial
Radio-Relay Systems Section 5: Digital Signal Processing SubSystem First Edition; CENELEC EN 60835-2-5: 1995
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 2: Measurements on Terrestrial
Radio-Relay Systems - Section 6: Protection Switching First Edition;
CENELEC EN 60835-2-6: 1995
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmissions Systems Part 2: Measurements on Terrestrial
Radio-Relay Systems Section 7: Diversity Switching and Combining
Equipment First Edition; CENELEC EN 60835-2-7: 1995
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmissions Systems Part 2: Measurements on Terrestrial
Radio-Relay Systems Section 8: Adaptive Equalizer First Edition;
(CENELEC EN 60835-2-8: 1993) (Amendment 1-1996)
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 2: Measurements on Terrestrial
Radio-Relay Systems - Section 9: Service Channels First Edition
60835-2-10
60835-2-11
60835-3-1
60835-3-2
60835-3-4
60835-3-5
60839-1-2
60839-1-3
60839-1-4
60839-2-2
60835-3-6
60835-3-7
60835-3-9
60835-3-10
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 2: Measurements on Terrestrial
Radio-Relay Systems Section Ten - Overall System Performance
First Edition; (CENELEC EN 60835-2-10: 1993)
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 2: Measurements on Terrestrial
Radio-Relay Systems - Section 11: Cross-Polarization Interference
Canceller First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 3: Measurements on Satellite Earth
Stations Section One - General First Edition; CENELEC EN 608353-1: 1992
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurements on Satellite
Earth Stations Section 2: Antenna First Edition; CENELEC EN
60835-3-2: 1996
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 3: Measurements on Satellite Earth
Stations Section 4: Low Noise Amplifier First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 3: Measurement on Satellite Earth
Stations Section 5 - Up- and Down-Converters First Edition
Alarm Systems Part 1: General Requirements Section Two - Power
Units, Test Methods and Performance Criteria First Edition
Alarm Systems Part 1: General Requirements Section Three Environmental Testing First Edition
Alarm Systems Part 1: General Requirements Section Four - Code of
Practice First Edition
Alarm Systems Part 2: Requirements for Intruder Alarm Systems
Section Two - Requirements for Detectors - General First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurements on Satellite
Earth Stations Section 6: High-Power Amplifiers First Edition
CENELEC EN 60 835-3-6: 1996
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurement on Satellite Earth
Stations - Section 7: Figure-of-Merit of Receiving System First
Edition; CENELEC EN 60835-3-7: 1995
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 3: Measurement on Satellite Earth
Stations Section 9 - Terminal Equipment SCP-PSK First Edition;
CENELEC EN 60835-3-9: 1995
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurements on Satellite
Earth Stations - Section 10: Terminal Equipment - TDMA Traffic
Earth Station First Edition
60835-3-11
60835-3-12
60835-3-13
60835-3-14
60839-2-3
60839-2-4
60839-2-5
60839-2-6
60839-2-7
60839-5-1
60839-5-2
60839-5-4
60839-7-1
60839-7-2
60839-5-5
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurements on Satellite
Earth Stations - Section 11: Service Channel Equipment for SCPCPSK Transmission First Edition; CENELEC EN 60835-3-11: 1995;
BS EN
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 3: Measurements on Satellite Earth
Stations Section 12: Overall System Performance First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurements on Satellite
Earth Stations - Section 13: VSAT Systems First Edition
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems - Part 3: Measurements on Satellite
Earth Stations - Section 14: Earth Stations for Satellite News
Gathering (SNG) First Edition
Alarm Systems Part 2: Requirements for Intruder Alarm Systems
Section Three - Requirements for Infrared-Beam Interruption
Detectors in Buildings First Edition
Alarm Systems Part 2: Requirements for Intruder Alarm Systems
Section 4 - Ultrasonic Doppler Detectors for Use in Buildings First
Edition
Alarm Systems Part 2: Requirements for Intruder Alarm Systems
Section 5 - Microwave Doppler Detectors for Use in Buildings First
Edition
Alarm Systems Part 2: Requirements for Intruder Alarm Systems
Section Six - Passive Infra-Red Detectors for Use in Buildings First
Edition
Alarm Systems - Part 2: Requirements for Intruder Alarm Systems Section 7: Passive Glass-Break Detectors for Use in Buildings First
Edition
Alarm Systems Part 5: Requirements for Alarm Transmission
Systems Section 1: General Requirements for Systems First Edition
Alarm Systems Part 5: Requirements for Alarm Transmission
Systems Section 2: General Requirements for Equipment First
Edition
Alarm Systems Part 5: Requirements for Alarm Transmission
Systems Section 4: Alarm Transmission Systems Using Dedicated
Alarm Transmission Paths First Edition
Alarm Systems - Part 7-1: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - General First
Edition
Alarm Systems - Part 7-2: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Common
Application Layer Protocol First Edition
Alarm Systems Part 5: Requirements for Alarm Transmission
Systems Section 5: Requirements for Digital Communicator Systems
60839-5-6
60839-7-3
60839-7-4
60839-7-5
60839-7-6
60839-7-7
60839-7-11
60839-7-12
60839-7-20
60839-10-1
60840
60841
60842
60843-1
60843-2
Using the Public Switched Telephone Network First Edition
Alarm Systems Part 5: Requirements for Alarm Transmission
Systems Section 6: Requirements for Voice Communicator Systems
Using the Public Switched Telephone Network First Edition
Alarm Systems - Part 7-3: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Common Data Link
Layer Protocol First Edition
Alarm Systems - Part 7-4: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Common Transport
Layer Protocol First Edition
Alarm Systems - Part 7-5: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Alarm System
Interfaces Employing a Two-Wire Configuration in Accordance with
ISO/IEC 8482 First Edition
Alarm Systems - Part 7-6: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Alarm System
Interfaces Employing ITU-T Recommendation V.24/V.28 Signalling
First Edition
Alarm Systems - Part 7-7: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Alarm System
Interfaces for Plug-In Alarm System Transceivers First Edition
Alarm Systems - Part 7-11: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Serial Protocol for
Use by Digital Communicator Systems Using ITU-T
Recommendation V.23 Signalling at Interfaces with the PSTN First
Edition
Alarm Systems - Part 7-12: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - PTT Interfaces for
Dedicated Communications Channels Using ITU-T Recommendation
V.23 Signalling First Edition
Alarm Systems - Part 7-20: Message Formats and Protocols for Serial
Data Interfaces in Alarm Transmission Systems - Terminal Interfaces
Employing ITU-T Recommendation V.24/V.28 Signalling First
Edition
Alarm Systems Part 10: Alarm Systems for Road Vehicles - Section
1: Passenger Cars First Edition
Power Cables with Extruded Insulation for Their Accessories for
Rated Voltages Above 30 kV (Um = 36 kV) up to 150 kV (Um = 170
kV) Test Methods and Requirements Second Edition
Audio Recording - PCM Encoder/Decoder System First Edition
Guide for Application and Operation of Turbine-Type Synchronous
Machines Using Hydrogen as a Coolant First Edition
Helical-Scan Video Tape Cassette System Using 8 mm Magnetic
Tape - 8 mm Video Part 1: General Specifications Second Edition
Helical-Scan Video Tape Cassette System Using 8 mm Magnetic
Tape - 8 mm Video Part 2: PCM Multi-Track Audio System First
60843-3
60843-4
60846
60847
60848
60849
60850
60851-1
60851-2
60851-3
60851-4
60851-5
60851-6
60852-1
60852-2
60852-3
60852-4
60852-5
60853-1
60853-2
Edition; CENELEC EN 60843-2: 1995
Helical-Scan Video Tape Cassette System Using 8 mm Magnetic
Tape - 8 mm Video Part 3: High-Band Specifications for Hi 8 First
Edition; CENELEC EN 60843-3: 1993
Helical-Scan Video Tape Cassette System Using 8 mm Magnetic
Tape (8 mm Video) - Part 4: Video Subcode (VSC) First Edition
Beta, X and Gamma Radiation Dose Equivalent and Dose Equivalent
Rate Meters for Use in Radiation Protection First Edition
Characteristics of Local Area Networks (LAN) First Edition
Preparation of Function Charts for Control Systems First Edition;
Corrigendum-09/1990; AS/NZS 4382: 1996
Sound Systems for Emergency Purposes Second Edition
Railway Applications - Supply Voltages of Traction Systems Second
Edition
Winding Wires Test Methods Part 1: General Second Edition
Winding Wires - Test Methods - Part 2: Determination of
Dimensions Second Edition; Amendment 1: 07-1997
Winding Wires - Test Methods - Part 3: Mechanical Properties
Edition 2.1; Edition 2: 1996, Consolidated with Amendment 1: 1997
Winding Wires - Test Methods - Part 4: Chemical Properties Edition
2.1: Edition 2: 1996 Consolidated with Amendment 1: 1997
Winding Wires - Test Methods - Part 5: Electrical Properties Edition
3.1; Edition 3: 1996 Consolidated with Amendment 1: 1997
Winding Wires - Test Methods - Part 6: Thermal Properties Second
Edition; Amendment 1 05-1997
Outline Dimensions of Transformers and Inductors for Use in
Telecommunication and Electronic Equipment Part 1: Transformers
and Inductors Using YEI-1 Laminations First Edition
Outline Dimensions of Transformers and Inductors for Use in
Telecommunication and Electronic Equipment Part 2: Transformers
and Inductors Using YEx-2 Laminations for Printed Wiring Board
Mounting First Edition
Outline Dimensions of Transformers and Inductors for Use in
Telecommunication and Electronic Equipment Part 3: Transformers
and Inductors Using YUI-1 Laminations First Edition
Outline Dimensions of Transformers and Inductors for Use in
Telecommunication and Electronic Equipment - Part 4: Transformers
and Inductors Using YUI-2 Laminations First Edition
Outline Dimensions of Transformers and Inductors for Use in
Telecommunication and Electronic Equipment - Part 5: Transformers
and Inductors Using the Series Q of C-Cores First Edition
Calculation of the Cyclic and Emergency Current Rating of Cables
Part 1: Cyclic Rating Factor for Cables up to and Including 18/30
(36) kV First Edition; (Amendment 1-1994)
Calculation of the Cyclic and Emergency Current Rating of Cables
Part 2: Cyclic Rating of Cables Greater Than 18/30 (36) kV and
60854
60855
TS 60859
60860
60861
60862-2
60862-3
60863
60865-1
60862-1
60864-1
60864-2
60865-2
60866
60867
60868
60868-0
60869-1
Emergency Ratings for Cables of All Voltages First Edition
Methods of Measuring the Performance of Ultrasonic Pulse-Echo
Diagnostic Equipment First Edition
Insulating Foam-Filled Tubes and Solid Rods for Live Working First
Edition; Corrigendum: 07-1999
Cable Connections for Gas-Insulated Metal-Enclosed Switchgear for
Rated Voltages of 72,5 kV and Above - Fluid-Filled and Extruded
Insulation Cables - Fluid-Filled and Dry Type Cable-Terminations
Second Edition; Corrigendum: 02-2000; Corrigendum: 12-2000
Warning Equipment for Criticality Accidents First Edition
Equipment for Continuously Monitoring for Beta and Gamma
Emitting Radionuclides in Liquid Effluents First Edition
Surface Acoustic Wave (SAW) Filters Part 2: Guide to the Use of
Surface Acoustic Wave Filters (Chapter III) First Edition
Surface Acoustic Wave (SAW) Filters Part 3: Standard Outlines
(Chapter IV) First Edition
Presentation of Reliability, Maintainability and Availability
Predictions First Edition
Short-Circuit Currents - Calculation of Effects Part 1: Definitions and
Calculation Methods Second Edition; CENELEC EN 60865-1: 1993;
Corrigendum-03/1995
Surface Acoustic Wave (SAW) Filters Part 1: General Information,
Standard Values and Test Conditions Chapter I: General Information
and Standard Values Chapter II: Test Conditions First Edition
Standardization of Interconnections between Broadcasting
Transmitters or Transmitter Systems and Supervisory Equipment Part
1: Interface Standards for Systems Using Dedicated Interconnections
First Edition; Amendment 1-1987
Standardization of Interconnections between Broadcasting
Transmitters or Transmitter Systems and Supervisory Equipment Part 2: Interface Standards for Systems using Data Bus Type
Interconnections First Edition
Short-Circuit Currents - Calculation of Effects - Part 2: Examples of
Calculation First Edition
Characteristics and Calibration of Hydrophones for Operation in the
Frequency Range 0.5 MHz to 15 MHz First Edition
Insulating Liquids - Specifications for Unused Liquids Based on
Synthetic Aromatic Hydrocarbons Second Edition; CENELEC EN
60867: 1994
Flickermeter - Functional and Design Specifications First Edition;
Amendment 1-1990; CENELEC EN 60868:1993; AS/NZS 4376:
1996
Flickermeter Part 0: Evaluation of Flicker Severity First Edition;
CENELEC EN 60868-0: 1993; AS/NZS 4377: 1996
Fibre Optic Attenuators - Part 1: Generic Specification Third Edition;
IECQ QC 800000
60870-1-1
60870-1-2
TR 60870-1-3
60870-1-4
TR 60870-1-5
60870-2-1
60870-5-2
60870-5-3
60870-5-4
60870-5-5
60870-5-103
60870-5-104
60870-5-101
60870-5-102
TR 60870-6-1
60870-6-2
Telecontrol Equipment and Systems Part 1: General Considerations
Section One - General Principles First Edition
Telecontrol Equipment and Systems Part 1: General Considerations
Section 2 - Guide for Specifications First Edition
Telecontrol Equipment and Systems - Part 1: General Considerations
- Section 3: Glossary Second Edition
Telecontrol Equipment and Systems - Part 1: General Considerations
- Section 4: Basic Aspects of Telecontrol Data Transmission and
Organization of Standards IEC 870-5 and IEC 870-6 First Edition
Telecontrol Equipment and Systems - Part 1-5: General
Considerations - Influence of Modem Transmission Procedures with
Scramblers on the Data Integrity of Transmission Systems Using the
Protocol IEC 60870-5 First Edition
Telecontrol Equipment and Systems - Part 2: Operating Conditions Section 1: Power Supply and Electromagnetic Compatibility Second
Edition; CENELEC EN 60 870-2-1: 1996
Telecontrol Equipment and Systems Part 5: Transmission Protocols
Section 2: Link Transmission Procedures First Edition; (CENELEC
EN 60870-5-2: 1993)
Telecontrol Equipment and Systems Part 5: Transmission Protocols
Section 3: General Structure of Application Data First Edition
Telecontrol Equipment and Systems Part 5: Transmission Protocols
Section 4: Definition and Coding of Application Information
Elements First Edition; CENELEC EN 60870-5-4: 1993
Telecontrol Equipment and Systems - Part 5: Transmission Protocols
- Section 5: Basic Application Functions First Edition; CENELEC
EN 60870-5-5: 1995
Telecontrol Equipment and Systems - Part 5-103: Transmission
Protocols - Companion Standard for the Informative Interface of
Protection Equipment First Edition
Telecontrol Equipment and Systems - Part 5-104: Transmission
Protocols - Network Access for IEC 60870-5-101 Using Standard
Transport Profiles First Edition
Telecontrol Equipment and Systems - Part 5-101: Transmission
Protocols - Companion Standard for Basic Telecontrol Tasks First
Edition; CENELEC EN 60870-5-101: 1996; Amendment 1: 04-2000;
Amendment 2: 10-2001
Telecontrol Equipment and Systems - Part 5: Transmission Protocols
- Section 102: Companion Standard for the Transmission of
Integrated Totals in Electric Power Systems First Edition; CENELEC
EN 60 870-5-102: 1996
Telecontrol Equipment and Systems Part 6: Telecontrol Protocols
Compatible with ISO Standards and ITU-T Recommendations Section 1: Application Context and Organization of Standards First
Edition
Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols
60870-6-501
60870-6-502
60870-6-503
TR 60870-6-504
60870-6-601
TS 60870-6-602
60870-6-701
60870-6-702
60870-6-802
60871-1
TS 60871-2
TR 60871-3
60871-4
Compatible with ISO Standards and ITU-T Recommendations Section 2: Use of Basic Standards (OSI Layers 1- 4) First Edition;
CENELEC EN 60870-6-2: 1995
Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols
Compatible with ISO Standards and ITU-T Recommendations Section 501: TASE.1 Service Definitions First Edition
Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols
Compatible with ISO Standards and ITU-T Recommendations Section 502: TASE.1 Protocol Definitions First Edition; CENELEC
EN 60870-2-502: 1996
Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols
Compatible with ISO Standards and ITU-T Recommendations Section 503: TASE.2 Services and Protocol First Edition
Telecontrol Equipment and Systems - Part 6-504: Telecontrol
Protocols Compatible with ISO Standards and ITU-T
Recommendations - TASE.1 User Conventions First Edition
Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols
Compatible with ISO Standards and ITU-T Recommendations Section 601: Functional Profile for Providing the ConnectionOriented Transport Service in an End System Connected Via
Permanent Acc
Telecontrol Equipment and Systems - Part 6-602: Telecontrol
Protocols Compatible with ISO Standards and ITU-T
Recommendations - TASE Transport Profiles First Edition
Telecontrol Equipment and Systems - Part 6-701: Telecontrol
Protocols Compatible with ISO Standards and ITU-T
Recommendations - Functional Profile for Providing the TASE.1
Application Service in End Systems First Edition
Telecontrol Equipment and Systems - Part 6-702: Telecontrol
Protocols Compatible with ISO Standards and ITU-T
Recommendations - Functional Profile for Providing the TASE.2
Application Service in End Systems First Edition
Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols
Compatible with ISO Standards and ITU-T Recommendations Section 802: TASE.2 Object Models First Edition
Shunt Capacitors for A.C. Power Systems Having a Rated Voltage
Above 1 000 V - Part 1: General - Performance, Testing and Rating Safety Requirements - Guide for Installation and Operation Second
Edition; Corrigendum -1998
Shunt Capacitors for a.c. Power Systems Having a Rated Voltage
Above 1 000 V - Part 2: Endurance Testing Second Edition
Shunt Capacitors for A.C. Power Systems Having a Rated Voltage
Above 1 000 V - Part 3: Protection of Shunt Capacitors and Shunt
Capacitor Banks First Edition
Shunt Capacitors for A.C. Power Systems Having a Rated Voltage
Above 1 000 V - Part 4: Internal Fuses First Edition
60872-1
60872-2
60872-3
60873
60874-1
60874-1-1
60874-2
60874-3
60874-4
60874-5
60874-6
60874-7
60874-8
60874-9
60874-10
Maritime Navigation and Radiocommunication Equipment and
Systems - Radar Plotting Aids - Part 1: Automatic Radar Plotting
Aids (ARPA) - Methods of Testing and Required Test Results First
Edition
Marine Navigation and radiocommunication Equipment and Systems
- Radar Plotting Aids - Part 2: Automatic Tracking AIDS (ATA) Methods of Testing and Required Test Results First Edition; Replaces
IEC 60872
Maritime Navigation and Radiocommunication Equipment and
Systems - Radar Plotting Aids - Part 3: Electronic Plotting Aid (EPA)
- Performance Requirements - Methods of Testing and Required Test
Results First Edition
Methods of Evaluating the Performance of Electrical and Pneumatic
Analogue Chart Recorders for Use in Industrial-Process Control
Systems First Edition; (CENELEC EN 60873:1993)
Connectors for Optical Fibres and Cables - Part 1: Generic
Specification Fourth Edition; IECQ QC 910000
Connectors for Optical Fibres and Cables Part 1-1: Blank Detail
Specification - Environmental Categories First Edition; IECQ QC
910001 to 910006; QC 910099; Corrigendum-1996
Connectors for Optical Fibres and Cables Part 2: Sectional
Specification for Fibre Optic Connector - Type F-SMA Second
Edition; (IECQ QC 910100) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 3: Sectional
Specification for Fibre Optic Connector - Type CFO3 Second
Edition; (IECQ QC 910300) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 4: Sectional
Specification for Fibre Optic Connector - Type CFO4 Second
Edition; (IECQ QC 910500) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 5: Sectional
Specification for Fibre Optic Connector - Type BAM Second Edition;
(IECQ QC 910400) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 6: Sectional
Specification for Fibre Optic Connector - Type LSA Second Edition;
(IECQ QC 910200) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 7: Sectional
Specification for Fibre Optic Connector - Type FC Second Edition;
(IECQ QC 910700) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 8: Sectional
Specification for Fibre Optic Connector - Type D Second Edition;
(IECQ QC 910600) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 9: Sectional
Specification for Fibre Optic Connector - Type OF-2 Second Edition;
(IECQ QC 910800) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 10: Sectional
Specification Fibre Optic Connector Type BFOC/2,5 First Edition;
60874-10-1
60874-11
60874-12
60874-13
60874-15
60874-10-2
60874-10-3
60874-14
60874-14-1
60874-14-2
60874-14-3
60874-14-4
60874-14-5
60874-14-6
(IECQ QC 911200) (Corrigendum-1996)
Connectors for Optical Fibres and Cables - Part 10-1: Detail
Specification for Fibre Optic Connector Type BFOC/2,5 Terminated
to Multimode Fibre Type A1 First Edition; QC 910003XX0001
Connectors for Optical Fibres and Cables Part 11: Sectional
Specification for Fibre Optic Connector - Type OCCA-PC First
Edition; (IECQ QC 911600) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 12: Sectional
Specification for Fibre Optic Connector - Type OCCA-BU First
Edition; (Corrigendum-1996) (IECQ QC 911500)
Connectors for Optical Fibres and Cables Part 13: Sectional
Specification for Fibre Optic Connector - Type CF 08 First Edition;
(IECQ QC 911700) (Corrigendum-1996)
Connectors for Optical Fibres and Cables Part 15: Sectional
Specification for Fibre Optic Connector - Type DS First Edition;
IECQ QC 912000; Corrigendum-1996
Connectors for Optical Fibres and Cables - Part 10-2: Detail
Specification for Fibre Optic Connector Type BFOC/2,5 Terminated
to Single-Mode Fibre Type B1 First Edition; QC 910003XX0002
Connectors for Optical Fibres and Cables - Part 10-3: Detail
Specification for Fibre Optic Adaptor Type BFOC/2,5 for Single and
Multimode Fibre First Edition; QC 910003XX0003
Connectors for Optical Fibres and Cables Part 14: Sectional
Specification for Fibre Optic Connector - Type SC First Edition;
Corrigendum-1993; IECQ QC 911800; Corrigendum-1996
Connectors for Optical Fibres and Cables - Part 14-1: Detail
Specification for Fibre Optic Connector Type SC-PC Standard
Terminated to Multimode Fibre Type A1a, A1b First Edition; QC
910004XX0001
Connectors for Optical Fibres and Cables - Part 14-2: Detail
Specification for Fibre Optic Connector Type SC-PC Standard
Terminated to Single-Mode Fibre Type B1 First Edition; QC
910004XX0002
Connectors for Optical Fibres and Cables - Part 14-3: Detail
Specification for Fibre Optic Adaptor (Simplex) Type SC for SingleMode Fibre First Edition; QC 910004XX0003
Connectors for Optical Fibres and Cables - Part 14-4: Detail
Specification for Fibre Optic Adaptor (Simplex) Type SC for
Multimode Fibre First Edition; QC 910004XX0004
Connectors for Optical Fibres and Cables - Part 14-5: Detail
Specification for Fibre Optic Connector Type SC-PC Untuned
Terminated to Single-Mode Fibre Type B1 First Edition; QC
910004XX0005
Connectors for Optical Fibres and Cables - Part 14-6: Detail
Specification for Fibre Optic Connector Type SC-APC 9 Degrees
Untuned Terminated to Single-Mode Fibre Type B1 First Edition;
60874-14-7
60874-14-9
60874-14-10
60874-16
60874-17
60874-19
60874-19-2
60874-19-3
60875-1
60874-19-1
60875-1-1
60875-2
60875-3
60876-1
TR 60877
QC 910004XX0006
Connectors for Optical Fibres and Cables - Part 14-7: Detail
Specification for Fibre Optic Connector Type SC-APC 9 Degrees
Tuned Terminated to Single-Mode Fibre Type B1 First Edition; QC
910004XX0007
Connectors for Optical Fibres and Cables - Part 14-9: Fibre Optic
Connector Type SC-APC Tuned 8 Degrees Terminated on Single
Mode Fibre Type B1 - Detail Specification First Edition
Connectors for Optical Fibres and Cables - Part 14-10: Fibre Optic
Pigtail or Patch Cord Connector Type SC-APC Untuned 8 Degrees
Terminated on Single Mode Fibre Type B1 - Detail Specification
First Edition
Connectors for Optical Fibres and Cables - Part 16: Sectional
Specification for Fibre Optic Connector - Type MT First Edition;
(IECQ QC 911900) (Corrigendum-1996)
Connectors for Optical Fibres and Cables - Part 17: Sectional
Specification for Fibre Optic Connector - Type F-05 (Friction Lock)
First Edition; IECQ QC 911300; Corrigendum-1996
Connectors for Optical Fibres and Cables - Part 19: Sectional
Specification for Fibre Optic Connector - Type SC-D(Uplex) First
Edition; (IECQ QC 912100) (Corrigendum-1996)
Connectors for Optical Fibres and Cables - Part 19-2: Fibre Optic
Adaptor (Duplex) Type SC for Single-Mode Fibre Connectors Detail Specification First Edition
Connectors for Optical Fibres and Cables - Part 19-3: Fibre Optic
Adaptor (Duplex) Type SC for Multimode Fibre Connectors - Detail
Specification First Edition
Non-Wavelength-Selective Fibre Optic Branching Devices - Part 1:
Generic Specification Fourth Edition; QC 810000
Connectors for Optical Fibres and Cables - Part 19-1: Fibre Optic
Patch Cord Connector Type SC-PC (Floating Duplex) Standard
Terminated on Multimode Fibre Type A1a, A1b - Detail
Specification First Edition
Fibre Optic Branching Devices Part 1-1: Blank Detail Specification
First Edition; IECQ QC 810001
Fibre Optic Branching Devices Part 2: Sectional Specification - NonWavelength Selective Branching Devices Second Edition; IECQ QC
810100
Fibre Optic Branching Devices Part 3: Sectional Specification Wavelength Selective Branching Devices Second Edition; IECQ QC
810200
Fibre Optic Spatial Switches - Part 1: Generic Specification Third
Edition; QC 820000
Procedures for Ensuring the Cleanliness of Industrial-Process
Measurement and Control Equipment in Oxygen Service Second
Edition
60878
60879
60880
60880-2
60882
60883
60884-1
60884-2-1
60663
60664-1
TR 60664-2-1
60684-3-272
60684-3-300
60684-3-320
60684-3-340 TO
342
60684-3-343 TO
345
Graphical Symbols for Electrical Equipment in Medical Practice First
Edition
Performance and Construction of Electric Circulating Fans and
Regulators First Edition; Corrigendum-1992; Replaces 60307: 1969,
60385: 1972 and 60385A: 1979
Software for Computers in the Safety Systems of Nuclear Power
Stations First Edition
Software for Computers Important to Safety for Nuclear Power Plants
- Part 2: Software Aspects of Defence Against Common Cause
Failures, Use of Software Tools and of Pre-Developed Software First
Edition
Pre-Heat Requirements for Starterless Tubular Fluorescent Lamps
First Edition
Measuring Method for Chrominance Signal-to-Random Noise Ratio
for Video Tape Recorders First Edition
Plugs and Socket-Outlets for Household and Similar Purposes - Part
1: General Requirements Second Edition; (Amendment 1-1994)
(Amendment 2-1995)
Plugs and Socket-Outlets for Household and Similar Purposes Part 2:
Particular Requirements for Fused Plugs First Edition
Planning of (Single-Sideband) Power Line Carrier Systems First
Edition
Insulation Coordination for Equipment within Low-Voltage Systems
- Part 1: Principles, Requirements and Tests Edition 1.1; Edition 1:
1992 Consolidated with Amendment 1:2000
Insulation Coordination for Equipment within Low-Voltage Systems
- Part 2-1: Application Guide - Dimensioning Procedure Worksheets
and Dimensioning Examples First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 272: Heat-Shrinkable Elastomer Sleeving,
Flame Retarded, Fluid Resistant, Shrink Ratio 2:1, Thin Wall First
Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheet 300: Glass
Textile Fibre Sleeving, Braided, Uncoated First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheet 320:
Polyethylene Terephthalate Textile, Lightly Impregnated First
Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheet 340 to 342:
Expandable Braided Polyethylene Terephthalate Textile Sleeving
First Edition; CENELEC 60684-3-340 to 342: 1994
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 343 to 345:
Expandable Braided Ethylene Chlorotrifluoroethylene (E-CTFE)
60686
60687
60689
60684-3-400 TO
402
60684-3-403 TO
405
60684-3-406 TO
408
60684-3-409
60684-3-420 TO
422
60688
60691
60692
60694
60695-1-1
60695-1-2
60695-1-3
60695-2-2
Textile Sleeving, Uncoated First Edition; CENELEC EN 60684-3Stabilized Power Supplies, A.C. Output First Edition
Alternating Current Static Watt-Hour Meters for Active Energy
(Classes 0,2 S and 0,5 S) Second Edition; (CENELEC EN
60687:1992)
Measurements and Test Methods for 32 kHz Quartz Crystal Units for
Wrist Watches and Standard Values First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 400 to 402:
Glass Textile Sleeving with Silicone Elastomer Coating First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 403 to 405:
Glass Textile Sleeving with Acrylic Based Coating First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 406 to 408:
Glass Textile Sleeving with PVC Based Coating First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 409: Glass Textile Sleeving with
Polyurethane (PUR)-Based Coating First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 420 to 422:
Polyethylene Terephthalate Textile with Acrylic Based Coating First
Edition
Electrical Measuring Transducers for Converting a.c. Electrical
Quantities to Analogue or Digital Signals Edition 2.1; Edition 2: 1992
Consolidated with Amendment 1: 1997; Amendment 2:06-2001
Thermal-Links - Requirements and Application Guide Edition 2.2;
Edition 2:1993 Consolidated with Amendments 1:1995 and 2:2000
Nuclear Instrumentation - Density Gauges Utilizing Ionizing
Radiation - Definitions and Test Methods Second Edition
Common Specifications For High-Voltage Switchgear and
Controlgear Standards Edition 2.1; Edition 2:1996 Consolidated with
Amendment 1:2000; Amendment 2:07-2001; Corrigendum 1 12-2001
Fire Hazard Testing - Part 1-1: Guidance for Assessing the Fire
Hazard of Electrotechnical Products - General Guidelines Third
Edition; Corrigendum: 01-2000; Corrigendum 2, 08-2000
Fire Hazard Testing Part 1: Guidance for the Preparation of
Requirements and Test Specifications for Assessing Fire Hazard of
Electrotechnical Products Guidance for Electronic Components First
Edition
Fire Hazard Testing Part 1: Guidance for the Preparation of
Requirements and Test Specifications for Assessing Fire Hazard of
Electrotechnical Products Guidance for Use of Preselection
Procedures First Edition
Fire Hazard Testing Part 2: Test Methods Section 2 - Needle-Flame
Test Second Edition; CENELEC HD 444.2.2 S2: 1992; Amendment
60695-2-3
60695-2-4/0
60695-2-20
60695-4
TR 60695-7-3
60695-8-1
60695-2-4/1
60695-2-10
60695-2-11
60695-2-12
60695-2-13
60695-3-1
60695-5-1
60695-7-1
1-1994; CENELEC EN 60695-2-2 prA1: 1995; AS/NZS 4695.2.2:
1996; CENELEC EN 60695- 2-2: 1994
Fire Hazard Testing Part 2: Test Methods Bad-Connection Test with
Heaters First Edition
Fire Hazard Testing Part 2: Test Methods - Section 4/Sheet 0:
Diffusion Type and Premixed Type Flame Test Methods First
Edition; (CENELEC EN 60695-2-4/0 :1993) (AS/NZS 4695.2.40:
1996)
Fire Hazard Testing - Part 2: Glowing/Hot Wire Based Test Methods
- Section 20: Hot-Wire Coil Ignitability Test on Materials First
Edition
Fire Hazard Testing - Part 4: Terminology Concerning Fire Tests
Edition 2.2; Edition 2:1993 Consolidated with Amendments 1:1995
and 2:2001
Fire Hazard Testing - Part 7-3: Toxicity of Fire Effluent - Use and
Interpretation of Test Results First Edition
Fire Hazard Testing - Part 8-1: Heat Release - General Guidance First
Edition
Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 1: 1 kW
Nominal Pre-Mixed Test Flame and Guidance First Edition;
Amendment 1-1994; CENELEC EN 60695-2-4/1: 1993; AS/NZS
4695.2.41: 1996
Fire Hazard Testing - Part 2-10: Glowing/Hot-Wire Based Test
Methods - Glow-Wire Apparatus and Common Test Procedure First
Edition; Cancels and Replaces the First Edition of IEC 60695-21/0:1994
Fire Hazard Testing - Part 2-11: Glowing/Hot-Wire Based Test
Methods - Glow-Wire Flammability Test Method for End-Products
First Edition; Cancels and Replaces the First Edition of IEC 60695-21/1:1994; Corrigendum 1-2001
Fire Hazard Testing - Part 2-12: Glowing/Hot-Wire Based Test
Methods - Glow-Wire Flammability Test Method for Materials First
Edition; Supersedes IEC 60695-2-1/2:1994
Fire Hazard Testing - Part 2-13: Glowing/Hot-Wire Based Test
Methods - Glow-WIre Ignitability Test Method for Materials First
Edition; Cancels and Replaces the First Edition of IEC 60695-21/3:1994
Fire Hazard Testing Part 3: Examples of Fire Hazard Assessment
Procedures and Interpretation of Results Combustion Characteristics
and Survey of Test Methods for Their Determination First Edition
Fire Hazard Testing Part 5: Assessment of Potential Corrosion
Damage by Fire Effluent - Section 1: General Guidance First Edition;
CENELEC EN 60695-5-1: 1993; AS/NZS 4695.5.1: 1996
Fire Hazard Testing - Part 7: Guidance on the Minimization of Toxic
Hazards Due to Fires Involving Electrotechnical Products - Section 1:
General (AS/NZS 4695.7.1:1996) (First Edition; CENELEC EN 60
TR 60695-7-4
TS 60695-8-2
60695-9-1
TS 60695-9-2
60695-10-2
TS 60695-11-3
TS 60695-11-4
60695-11-10
60695-11-20
TR 60695-11-30
60700-1
60701
60702-1
60702-2
60703
60704-1
60704-2-1
60704-2-2
60704-2-3
695-7-1: 1995; AS/NZS 4695.7.1: 1996
Fire Hazard Testing - Part 7: Guidance on the Minimization of Toxic
Hazards Due to Fires Involving Electrotechnical Products - Section 4:
Unusual Toxic Effects in Fires First Edition
Fire Hazard Testing - Part 8-2: Heat Release - Summary and
Relevance of Test Methods First Edition
Fire Hazard Testing - Part 9-1: Surface Spread of Flame - General
Guidance First Edition
Fire Hazard Testing - Part 9-2: Surface Spread of Flame - Summary
and Relevance of Test Methods First Edition
Fire Hazard Testing - Part 10-2: Guidance and Test Methods for the
Minimization of the Effects of Abnormal Heat on Electrotechnical
Products Involved in Fires - Method for Testing Products Made from
Non-Metallic Materials for Resistance to Heat Using the B
Fire Hazard Testing - Part 11-3: Test Flames - 500 W Flames Apparatus and Confirmational Test Methods First Edition
Fire Hazard Testing - Part 11-4: Test Flames - 50 W Flames Apparatus and Confirmational Test Methods First Edition
Fire Hazard Testing - Part 11-10: Test Flames - 50 W Horizontal and
Vertical Flame Test Methods First Edition
Fire Hazard Testing - Part 11-20: Test Flames - 500 W Flame Test
Methods First Edition; Corrigendum: 02-2000
Fire Hazard Testing - Part 11-30: Test Flames - History and
Development from 1979 to 1999 First Edition
Thyristor Valves for High Voltage Direct Current (HVDC) Power
Transmission - Part 1: Electrical Testing First Edition
Axial Lead Cores Made of Magnetic Oxides or Iron Powder First
Edition
Mineral Insulated Cables and Their Terminations with a Rated
Voltage Not Exceeding 750 V Part 1: Cables Second Edition;
(Amendment 1-1992)
Mineral Insulated Cables and Their Terminations with a Rated
Voltage Not Exceeding 750 V Part 2: Terminations First Edition
Test Methods for Electroheating Installations with Electron Guns
First Edition
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 1: General
Requirements Second Edition
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 2-1: Particular
Requirements for Vacuum Cleaners Second Edition
Test Code for the Determination of Airborne Acoustical Noise
Emitted by Household and Similar Electrical Appliances Part 2:
Particular Requirements for Forced Draught Convection Heaters First
Edition; CENELEC EN 60704-2-2: 1994
Household and Similar Electrical Appliances - Test Code for the
60704-2-4
60704-2-5
60704-2-6
60704-2-7
60704-2-8
60704-2-11
60704-2-13
60704-3
60705
60706-1
60706-2
60706-3
60706-4
60706-5
60706-6
Determination of Airborne Acoustical Noise - Part 2-3: Particular
Requirements for Dishwashers Second Edition
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 2-4: Particular
Requirements for Washing Machines and Spin Extractors Second
Edition
Test Code for the Determination of Airborne Acoustical Noise
Emitted by Household and Similar Electrical Appliances Part 2:
Particular Requirements for Room Heaters of the Storage Type First
Edition; CENELEC EN 60704-2-5: 1994
Test Code for the Determination of Airborne Acoustical Noise
Emitted by Household and Similar Electrical Appliances Part 2:
Particular Requirements for Tumble-Dryers First Edition; CENELEC
EN 60704-2-6: 1995
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 2: Particular
Requirements for Fans First Edition
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 2: Particular
Requirements for Electric Shavers First Edition
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 2-11: Particular
Requirements for Electrically-Opearted Food Preparation Appliances
First Edition
Household and Similar Electrical Appliances - Test Code for the
Determination of Airborne Acoustical Noise - Part 2-13: Particular
Requirements for Range Hoods First Edition
Test Code for the Determination of Airborne Acoustical Noise
Emitted by Household and Similar Electrical Appliances Part 3:
Procedure for Determining and Verifying Declared Noise Emission
Values First Edition; CENELEC EN 60704-3: 1994
Household Microwave Ovens - Methods for Measuring Performance
Third Edition
Guide on Maintainability of Equipment Part 1: Sections One, Two
and Three Introduction, Requirements and Maintainability
Programme First Edition
Guide on Maintainability of Equipment Part 2: Section Five Maintainability Studies During the Design Phase First Edition
Guide on Maintainability of Equipment Part 3: Sections Six and
Seven Verification and Collection, Analysis and Presentation of Data
First Edition
Guide on Maintainability of Equipment Part 4: Section 8 Maintenance and Maintenance Support Planning First Edition
Guide on Maintainability of Equipment - Part 5: Section 4:
Diagnostic Testing First Edition
Guide on Maintainability of Equipment - Part 6: Section 9: Statistical
60707
60708-1
60708-2
60708-3
60708-4
60709
60710
60711
60712
60713
60714
60715
60716
60717
60718
60719
60720
60721-1
Methods in Maintainability Evaluation First Edition
Flammability of Solid Non-Metallic Materials When Exposed to
Flame Sources - List of Test Methods Second Edition
Low-Frequency Cables with Polyolefin Insulation and Moisture
Barrier Polyolefin Sheath Part 1: General Design Details and
Requirements First Edition; Amendment 3-1988, Contains
Amendments 1 and 2
Low-Frequency Cables with Polyolefin Insulation and Moisture
Barrier Polyolefin Sheath Part 2: Unit Type, Filled, Moisture Barrier
Polyethylene Sheathed Cables with Copper Conductors and Solid or
Cellular Insulation First Edition; (Amendment 1-1983)
Low-Frequency Cables with Polyolefin Insulation and Moisture
Barrier Polyolefin Sheath Part 3: Unit Type, Unfilled, Moisture
Barrier Polyethylene Sheathed Cables with Copper Conductors and
Solid or Cellular Insulation First Edition; (Amendment 1-1983)
Low-Frequency Cables with Polyolefin Insulation and Moisture
Barrier Polyethylene Sheath Part 4: Unit Type, Unfilled, Moisture
Barrier Polyethylene Sheathed Cables with Copper Conductors, Solid
Insulation and Integral Suspension Strand First Edition; Amend
Separation within the Reactor Protection System First Edition
Radiation Protection Equipment for the Measuring and Monitoring of
Airborne Tritium First Edition
Occluded-Ear Simulator for the Measurement of Earphones Coupled
to the Ear by Ear Inserts First Edition
Helical-Scan Video-Tape Cassette System Using 19 mm (3/4 in)
Magnetic Tape, Known as U-Format Second Edition; (Amendment 11993) (CENELEC EN 60712: 1994)
Subroutines for CAMAC First Edition
Expression of the Properties of Spectrum Analyzers First Edition
Dimensions of Low-Voltage Switchgear and Controlgear
Standardized Mounting on Rails for Mechanical Support of Electrical
Devices in Switchgear and Controlgear Installations First Edition;
(Amendment 1-1995)
Expression of the Properties of Signal Generators First Edition;
Replaces IEC 60452: 1973, IEC 60453: 1973 and IEC 60592: 1978
Method for the Determination of the Space Required by Capacitors
and Resistors with Unidirectional Terminations First Edition
Electrical Equipment for the Supply of Energy to Battery-Powered
Road Vehicles Third Edition
Calculation of the Lower and Upper Limits for the Average Outer
Dimensions of Cables with Circular Copper Conductors and of Rated
Voltages up to and Including 450/750 V Second Edition; CENELEC
EN 60719: 1993
Characteristics of Line Post Insulators First Edition
Classification of Environmental Conditions Part 1: Environmental
Parameters and Their Severities Second Edition; Amendment 1-1992;
60721-2-1
60721-2-2
60721-2-3
60721-2-4
60721-2-5
60721-2-6
60721-2-7
60721-2-8
60721-3-0
60721-3-1
60721-3-2
60721-3-3
60721-3-4
60721-3-5
60721-3-6
CENELEC HD 478.1 S2: 1994; Amendment 2-1995; CENELEC EN
60721-1: 1995
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature Temperature and Humidity First
Edition; (Amendment 1-1987)
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature Precipitation and Wind First Edition
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature Air Pressure First Edition
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature Solar Radiation and Temperature
First Edition; (Amendment 1-1988)
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature Section 5: Dust, Sand, Salt Mist First
Edition
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature - Earthquake Vibration and Shock
First Edition; CENELEC HD 478.2.6 S1: 1992
Classification of Environmental Conditions Part 2: Environmental
Conditions Appearing in Nature Fauna and Flora First Edition
Classification of Environmental Conditions - Part 2: Environmental
Conditions Appearing in Nature - Section 8: Fire Exposure First
Edition
Classification of Environmental Conditions Part 3: Classification of
Groups of Environmental Parameters and Their Severities
Introduction First Edition; (Corrigendum-Dec 1985) (Amendment 11987) (CENELEC EN 60721-3-0: 1993)
Classification of Environmental Conditions - Part 3: Classification of
Groups of Environmental Parameters and Their Severities - Section
1: Storage Second Edition
Classification of Environmental Conditions - Part 3: Classification of
Groups of Environmental Parameters and Their Severities - Section
2: Transportation Second Edition
Classification of Environmental Conditions - Part 3: Classification of
Groups of Environmental Parameters and Their Severities - Section
3: Stationary Use at Weatherprotected Locations Second Edition;
(Amendment 1-1995) (Amendment 2-1996)
Classification of Environmental Conditions - Part 3: Classification of
Groups of Environmental Parameters and Their Severities - Section
4: Stationary Use at Non-Weatherprotected Locations Second
Edition; CEN EN 60721-3-4: 1995; Amendment 1-1996
Classification of Environmental Conditions Part 3: Classification of
Groups of Environmental Parameters and Their Severities - Section
5: Ground Vehicle Installations Second Edition
Classification of Environmental Conditions Part 3: Classification of
Groups of Environmental Parameters and Their Severities Ship
60721-3-7
60721-3-9
TR 60721-4-1
60722
60723-1
60723-2-1
TR 60721-4-2
TR 60721-4-3
TR 60721-4-4
TR 60721-4-5
TR 60721-4-6
TR 60721-4-7
60723-2
Environment First Edition; (Corrigendum-1987) (Amendment 11991) (CENELEC EN 60721-3-6: 1993) (Amendment 2-1996)
Classification of Environmental Conditions - Part 3: Classification of
Groups of Environmental Parameters and Their Severities - Section
7: Portable and Non-Stationary Use Second Edition; (CENELEC EN
60721-3-7: 1995) (Amendment 1-1996)
Classification of Environmental Conditions Part 3: Classification of
Groups of Environmental Parameters and Their Severities Section 9:
Microclimates Inside Products First Edition; (CENELEC EN 607213-9: 1993) (Amendment 1-1994) (Corrigendum-1995)
Classification of Environmental Conditions - Part 4-1: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Storage First Edition
Guide to the Lightning Impulse and Switching Impulse Testing of
Power Transformers and Reactors First Edition
Inductor and Transformer Cores for Telecommunications Part 1:
Generic Specification First Edition; (IECQ QC 250000)
Detail Specification for Electronic Components; Ferrite Cores;
Assessment Level: A First Edition; (IECQ QC 250101)
Classification of Environmental Conditions - Part 4-2: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Transportation First Edition
Classification of Environmental Conditions - Part 4-3: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Stationary Use at Weatherprotected Locations First Edition
Classification of Environmental Conditions - Part 4-4: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Stationary Use at Non-Weatherprotected Locations First Editio
Classification of Environmental Conditions - Part 4-5: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Ground Vehicle Installations First Edition
Classification of Environmental Conditions - Part 4-6: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Ship Environment First Edition
Classification of Environmental Conditions - Part 4-7: Guidance for
the Correlation and Transformation of Environmental Condition
Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 Portable and Non-Stationary Use First Edition
Inductor and Transformer Cores for Telecommunications Part 2:
Sectional Specification: Magnetic Oxide Cores for Inductor
60723-3
60723-3-1
60723-4
60723-4-1
60723-5
60723-5-1
60728-3
60728-4
60728-5
60728-6
60728-1
60728-9
60728-10
60728-11
60728-12
60729
60730-1
Applications First Edition; (Amendment 1-1989) (IECQ QC 250100)
Inductor and Transformer Cores for Telecommunications Part 3:
Sectional Specification: Magnetic Oxide Cores for Broad-Band
Transformers First Edition; IECQ QC 250200
Inductor and Transformer Cores for Telecommunications Part 3:
Blank Detail Specification: Magnetic Oxide Cores for Broad-Band
Transformers Assessment Levels A and B First Edition; IECQ QC
250201/QC 250202
Inductor and Transformer Cores for Telecommunications Part 4:
Sectional Specification: Magnetic Oxide Cores for Transformers and
Chokes for Power Applications First Edition; (IECQ QC 250300)
Inductor and Transformer Cores for Telecommunications Part 4:
Blank Detail Specification: Magnetic Oxide Cores for Transformers
and Chokes for Power Applications Assessment Level A First
Edition; (IECQ QC 250301)
Inductor and Transformer Cores for Telecommunications Part 5:
Sectional Specification: Adjusters Used with Magnetic Oxide Cores
for Use in Adjustable Inductors and Transformers First Edition;
(IECQ QC 250400)
Inductor and Transformer Cores for Telecommunications Part 5:
Sectional Specification: Adjusters Used with Magnetic Oxide Cores
for Use in Adjustable Inductors and Transformers Section 1: Blank
Detail Specification - Assessment Level A First Edition; IECQ
Cabled Distribution Systems for Television and Sound Signals - Part
3: Active Coaxial Wideband Distribution Equipment Second Edition
Cabled Distribution Systems for Television and Sound Signals - Part
4: Passive Coaxial Wideband Distribution Equipment Second Edition
Cabled Distribution Systems for Television and Sound Signals - Part
5: Headend Equipment First Edition
Cabled Distribution Systems for Television and Sound Signals - Part
6: Optical Equipment First Edition
Cabled Distribution Systems Part 1: Systems Primarily Intended for
Sound and Television Signals Operating Between 30 MHz and 1
GHz Second Edition; (Corrigendum-1986) (Amendment 1-1992)
(Amendment 2-1995)
Cabled Distribution Systems for Television and Sound Signals - Part
9: Interfaces of Cabled Distribution Systems for Digitally Modulated
Signals First Edition
Cabled Distribution Systems for Television and Sound Signals - Part
10: System Performance of Return Path First Edition
Cabled Distribution Systems for Television and Sound Signals - Part
11: Safety First Edition; Amendment 1: 10-2000
Cabled Distribution Systems for Television and Sound Signals - Part
12: Electromagnetic Compatibility of Systems First Edition
Multiple Controllers in a CAMAC Crate First Edition
Automatic Electrical Controls for Household and Similar Use - Part
60730-2-1
60730-2-2
60730-2-3
60730-2-4
60730-2-5
60730-2-6
60730-2-7
60730-2-8
60730-2-9
60730-2-10
60731
60732
60734
60735
60730-2-11
1: General Requirements Third Edition
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Electrical Controls for Electrical
Household Appliances First Edition; CAN/CSA-IEC E730-2-1-94
Automatic Electrical Controls for Household and Similar Use; Part 2:
Particular Requirements for Thermal Motor Protectors First Edition;
Amendment 1-1995; Amendment 2-1997
Automatic Electrical Controls for Household and Similar Use - Part
2-3: Particular Requirements for Thermal Protectors for Ballasts for
Tubular Fluorescent Lamps Edition 1:1990 Consolidated with
Amendments 1:1995 and 2:2001
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Thermal Motor Protectors for MotorCompressors of Hermetic and Semi-Hermetic Type First Edition;
Amendment 1-1994; CENELEC EN 60730-2-4: 1993; CAN/CSAIEC E730Automatic Electrical Controls for Household and Similar Use - Part
2: Particular Requirements for Automatic Electrical Burner Control
Systems Third Edition
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Automatic Electrical Pressure Sensing
Controls Including Mechanical Requirements First Edition;
Amendment 11-1994; CAN/CSA-IEC E730-2-6-94; Amendment 202/1997
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Timers and Time Switches First Edition;
Amendment 1-1994; CAN/CSA-IEC E730-2-7-94
Automatic Electrical Controls for Household and Similar Use - Part
2-8: Particular Requirements for Electrically Operated Water Valves,
Including Mechanical Requirements Second Edition
Automatic Electrical Controls for Household and Similar Use - Part
2-9: Particular Requirements for Temperature Sensing Controls
Second Edition
Automatic Electrical Controls for Household and Similar Use - Part
2-10: Particular Requirements for Motor Starting Relay First Edition;
Amendment 1; 07-1994; Amendment 2; 02-2001
Medical Electrical Equipment - Dosimeters with Ionization Chambers
as Used in Radiotherapy Second Edition
Measuring Methods for Cylinder Cores, Tube Cores and Screw Cores
of Magnetic Oxides First Edition
Household Electrical Appliances - Performance - Hard Water for
Testing Third Edition
Measuring Methods for Video Tape Properties Second Edition
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Energy Regulators Edition 1.2; Edition 1:
1993 Consolidated with Amendments 1: 1994 and 2: 1997
60730-2-12
60730-2-13
60730-2-14
60730-2-15
60730-2-16
60730-2-17
60730-2-18
60730-2-19
60736
60737
60738-1
60738-1-1
60738-1-2
60739
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Electrically Operated Door Locks First
Edition; CENELEC EN 60730-2-12: 1993; Amendment 1-1995;
CAN/CSA-IEC E730-2-12-94
Automatic Electrical Controls for Household and Similar Use Part 2:
Particular Requirements for Humidity Sensing Controls Edition 1.2;
Edition 1: 1995 Consolidated with Amendments 1: 1997 and 2: 2000
Automatic Electrical Controls for Household and Similar Use - Part
2-14: Particular Requirements for Electric Actuators Edition 1.1;
Edition 1:1995 Consolidated with Amendment 1:2001
Automatic Electrical Controls for Household and Similar Use - Part
2: Particular Requirements for Automatic Electrical Water Level
Sensing Controls of the Float or Electrode-Sensor Type Used in
Boiler Applications Edition 1.1; Edition 1: 1994 Consolidated
Automatic Electrical Controls for Household and Similar Use - Part
2-16: Particular Requirements for Automatic Electrical Water Level
Controls of the Float Type for Household and Similar Applications
Edition 1.2; Edition 1: 1995 Consolidated with Amendment
Automatic Electrical Controls for Household and Similar Use - Part
2-17: Particular Requirements for Electrically Operated Gas Valves,
Including Mechanical Requirements Edition 1.1; Edition 1:1997
Consolidated with Amendment 1:2000
Automatic Electrical Controls for Household and Similar Use - Part
2: Particular Requirements for Automatic Electrical Water and Air
Flow Sensing Controls, Including Mechanical Requirements First
Edition
Automatic Electrical Controls for Household and Similar Use - Part
2-19: Particular Requirements for Electrically Operated Oil Valves,
Including Mechanical Requirements Edition 1.1; Edition 1:1997
Consolidated with Amendment 1:2000
Testing Equipment for Electrical Energy Meters First Edition
In-Core Temperature or Primary Envelope Temperature
Measurements in Nuclear Power Reactors Characteristics and Test
Methods First Edition
Thermistors - Directly Heated Positive Step-Function Temperature
Coefficient - Part 1: Generic Specification Second Edition; QC
440000
Thermistors - Directly Heated Positive Step-Function Temperature
Coefficient - Part 1-1: Blank Detail Specification - Current Limitimg
Application - Assessment Level EZ Second Edition; IECQ QC
440001
Thermistors - Directly Heated Positive Step-Function Temperature
Coefficient - Part 1-2: Blank Detail Specification - Heating Element
Application - Assessment Level EZ First Edition; IECQ QC 440002
Digital Counting Ratemeters Characteristics and Test Methods First
Edition
60740
60741
60742
60743
60738-1-3
60738-1-4
60740-2
60744
60745-1
60745-2-1
60745-2-2
60745-2-3
60745-2-4
60745-2-5
60745-2-6
60745-2-7
60745-2-8
Laminations for Transformers and Inductors for Use in
Telecommunication and Electronic Equipment First Edition;
(Amendment 1-1991)
Multichannel Amplitude Analyzers: Standards for Time-toAmplitude Converters First Edition
Isolating Transformers and Safety Isolating Transformers Requirements First Edition; (Amendment 1-1992) (CAN/CSA-IEC
E742-94) (CENELEC EN 60742: 1995)
Terminology for Tools and Equipment to Be Used in Live Working
First Edition; (Amendment 1-1995)
Thermistors - Directly Heated Positive Step-Function Temperature
Coefficient - Part 1-3: Blank Detail Specification - Inrush Current
Application - Assessment Level EZ First Edition; IECQ QC 440003
Thermistors - Directly Heated Positive Step-Function Temperature
Coefficient - Part 1-4: Blank Detail Specification - Sensing
Application - Assessment Level EZ First Edition; IECQ QC 440004
Laminations for Transformers and Inductors for Use in
Telecommunication and Electronic Equipment Part 2: Specification
for the Minimum Permeabilities of Laminations Made of Soft
Magnetic Metallic Materials First Edition
Safety Logic Assemblies of Nuclear Power Plants Characteristics and
Test Methods First Edition
Safety of Hand-Held Motor-Operated Electric Tools - Part 1: General
Requirements Second Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Drills First Edition; (Amendment 1-1992)
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Screwdrivers and Impact Wrenches First Edition;
(Amendment 1-1991)
Safety of Hand-Held Motor-Operated Electric Tools - Part 2:
Particular Requirements for Grinders, Polishers and Disk-Type
Sanders First Edition; (Amendment 1-1995)
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Sanders First Edition; (Amendment 1-1992)
(Amendment 2-1995)
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Circular Saws and Circular Knives Second Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Hammers First Edition; Corrigendum-12/1989);
Amendment 1-1992
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Spray Guns for Non-Flammable Liquids First
Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Sheet Metal Shears First Edition; (Amendment 11992)
60745-2-9
60745-2-11
60745-2-12
60745-2-13
60745-2-14
60745-2-15
60745-2-16
60745-2-17
60746-1
60746-2
60746-3
60746-4
60746-5
60747-1
60747-2
60747-2-1
60747-2-2
60747-3
60747-3-1
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Tappers First Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Reciprocating Saws (Jig and Sabre Saws) First
Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Concrete Vibrators (Internal Vibrators) First
Edition; (Amendment 1-1991)
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Chain Saws First Edition; (Amendment 1-1992)
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Planers First Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Hedge Trimmers and Grass Shears First Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Tackers First Edition
Safety of Hand-Held Motor-Operated Electric Tools Part 2: Particular
Requirements for Routers and Trimmers First Edition
Expression of Performance of Electrochemical Analyzers Part 1:
General First Edition
Expression of Performance of Electrochemical Analyzers Part 2: pH
Value First Edition
Expression of Performance of Electrochemical Analyzers Part 3:
Electrolytic Conductivity First Edition
Expression of Performance of Electrochemical Analyzers Part 4:
Dissolved Oxygen in Water Measured by Membrane Covered
Amperometric Sensors First Edition
Expression of Performance of Electrochemical Analyzers Part 5:
Oxidation-Reduction Potential or Redox Potential First Edition
Semiconductor Devices - Discrete Devices and Integrated Circuits
Part 1: General First Edition; Amendment 3-1996, Incorporating
Amendment 1-1991 and Amendment 2-1993
Semiconductor Devices - Discrete Devices and Integrated Circuits
Part 2: Rectifier Diodes Second Edition
Semiconductor Devices Discrete Devices Part 2: Rectifier Diodes
Section One - Blank Detail Specification for Rectifier Diodes
(Including Avalanche Rectifier Diodes), Ambient and Case-Rated, up
to 100A First First; (IECQ QC 750108)
Semiconductor Devices - Discrete Devices - Part 2: Rectifier Diodes Section 2: Blank Detail Specification for Rectifier Diodes (Including
Avalanche Rectifier Diodes), Ambient and Case-Rated, for Currents
Greater Than 100 A First Edition; IECQ QC 750109
Semiconductor Devices - Discrete Devices Part 3: Signal (Including
Switching) and Regulator Diodes First Edition; Amendment 1-1991;
Amendment 2-1993
Semiconductor Devices Discrete Devices Part 3: Signal (Including
60747-3-2
60747-4
60747-4-1
60747-4-2
60747-5
60747-5-1
60747-5-2
60747-5-3
60747-6
60747-7
60747-9
60747-6-1
60747-6-2
60747-6-3
Switching) and Regulator Diodes Section One - Blank Detail
Specification for Signal Diodes, Switching Diodes and ControlledAvalanche Diodes First Edition; (IECQ QC 750101)
Semiconductor Devices Discrete Devices Part 3: Signal (Including
Switching) and Regulator Diodes Section Two - Blank Detail
Specification for Voltage-Regulator Diodes and Voltage-Reference
Diodes, Excluding Temperature-Compensated Precision Reference
Diode
Semiconductor Devices - Discrete Devices Part 4: Microwave
Devices First Edition; Amendment 1: 10-1993; Amendment 2: 041999
Semiconductor Devices - Discrete Devices - Part 4-1: Microwave
Diodes and Transistors - Microwave Field Effect Transistors - Blank
Detail Specification First Edition
Semiconductor Devices - Discrete Devices - Part 4-2: Microwave
Diodes and Transistors - Integrated-Circuit Microwave Amplifiers Blank Detail Specification First Edition
Semiconductor Devices Discrete Devices and Integrated Circuits Part
5: Optoelectronic Devices Second Edition; Amendment 1-1994;
Amendment 2-1995; Replaced Partially by IEC 60747-5-1: 1997 and
IEC 60747-5-3: 1997
Discrete Semiconductor Devices and Integrated Circuits - Part 5-1:
Optoelectronic Devices - General First Edition; Partially Replaces
IEC 747-5: 1992; Amendment 1: 03/2001
Discrete Semiconductor Devices and Integrated Circuits - Part 5-2:
Optoelectronic Devices - Essential Ratings and Characteristics First
Edition
Discrete Semiconductor Devices and Integrated Circuits - Part 5-3:
Optoelectronic Devices - Measuring Methods First Edition; Patially
Replaces IEC 747-5: 1992
Semiconductor Devices - Part 6: Thyristors Second Edition
Semiconductor Devices - Part 7: Bipolar Transistors Second Edition
Semiconductor Devices - Part 9: Insulated-Gate Bipolar Transistors
(IGBTs) First Edition; Amendment 1: 8/2001
Semiconductor Devices Discrete Devices Part 6: Thyristors Section
One - Blank Detail Specification for Reverse Blocking Triode
Thyristors, Ambient and Case-Rated, up to 100 A First Edition;
IECQ QC 750110
Semiconductor Devices Discrete Devices Part 6: Thyristors Section
Two - Blank Detail Specification for Bidirectional Triode Thyristors
(Triacs), Ambient or Case-Rated, up to 100 A First Edition; IECQ
QC 750111
Semiconductor Devices Discrete Devices Part 6: Thyristors Section
Three - Blank Detail Specification for Reverse Blocking Triode
Thyristors, Ambient and Case-Rated, for Currents Greater Than 100
A First Edition; IECQ QC 750113
60747-7-1
60747-7-2
60747-8-3
60747-10
60747-11
60747-12
60747-12-1
60747-12-2
60747-12-3
60747-12-4
60834-1
60834-2
60870-3
60870-4
60870-5-1
Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors
Section One - Blank Detail Specification for Ambient-Rated Bipolar
Transistors for Low and High-Frequency Amplification First Edition;
IECQ QC 750102
Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors
Section Two - Blank Detail Specification for Case-Rated Bipolar
Transistors for Low-Frequency Amplification First Edition; IECQ
QC 750103
Semiconductor Devices - Discrete Devices - Part 8: Field-Effect
Transistors - Section 3: Blank Detail Specification for Case- Rated
Field-Effect Transistors for Switching Applications First Edition;
(IECQ QC 750114) (Replaces 147 Series)
Semiconductor Devices Part 10: Generic Specification for Discrete
Devices and Integrated Circuits Second Edition; IECQ QC 700000;
Amendment 1-1995; Amendment 2-1996; Amendment 3-1996
Semiconductor Devices Part 11: Sectional Specification for Discrete
Devices First Edition; Amendment 1-1991; IECQ QC 750100;
Amendment 2-1996
Semiconductor Devices Part 12: Sectional Specification for
Optoelectronic Devices First Edition; IECQ QC 720100
Semiconductor Devices - Part 12: Optoelectronic Devices - Section 1:
Blank Detail Specification for Light Emitting/Infrared Emitting
Diodes with/without Pigtail for Fibre Optic Systems and SubSystems First Edition; IECQ QC 720101
Semiconductor Devices - Part 12: Optoelectronic Devices - Section 2:
Blank Detail Specification for Laser Diode Modules with Pigtail for
Fibre Optic Systems and Sub-Systems First Edition; IECQ QC
720102
Semiconductor Devices - Part 12-3: Optoelectronic Devices - Blank
Detail Specification for Light-Emitting Diodes - Display Application
First Edition; QC 720103
Semiconductor Devices - Part 12-4: Optoelectronic Devices - Blank
Detail Specification for Pin-FET Modules with/without Pigtail, for
Fibre Optic Systems or Subsystems First Edition; IECQ QC 720104
Teleprotection Equipment of Power Systems Performance and
Testing Part 1: Command Systems Second Edition
Performance and Testing of Teleprotection Equipment of Power
Systems - Part 2: Analogue Comparison Systems First Edition;
CENELEC HD 834-2:1993, Modified
Telecontrol Equipment and Systems Part 3: Interfaces (Electrical
Characteristics) First Edition
Telecontrol Equipment and Systems Part 4: Performance
Requirements First Edition
Telecontrol Equipment and Systems Part 5: Transmission Protocols
Section One - Transmission Frame Formats First Edition;
(CENELEC EN 60870-5-1: 1993)
60894
60835-1-1
60835-1-2
60870-2-2
60895
60896-1
60896-2
60897
60898
60951-2
60951-3
60951-4
60951-5
60952-1
60952-2
60747-12-5
Guide for a Test Procedure for the Measurement of Loss Tangent of
Coils and Bars for Machine Windings First Edition; Corrigendum
07/1987
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 1: Measurements Common to
Terrestrial Radio-Relay Systems and Satellite Earth Stations Section
One - General First Edition; (CENELEC EN 60835-1-1: 1992)
Methods of Measurement for Equipment Used in Digital Microwave
Radio Transmission Systems Part 1: Measurements Common to
Terrestrial Radio-Relay Systems and Satellite Earth Stations Section
2: Basic Characteristics First Edition; (Amendment 1-1995)
Telecontrol Equipment and Systems - Part 2: Operating Conditions Section 2: Environmental Conditions (Climatic, Mechanical and
Other Non-Electrical Influences) First Edition
Conductive Clothing for Live Working at a Nominal Voltage up to
800 kV A.C. First Edition
Stationary Lead-Acid Batteries General Requirements and Methods
of Test Part 1: Vented Types First Edition; Amendment 1:1988;
Amendment 2:1990
Stationary Lead-Acid Batteries - General Requirements and Methods
of Test - Part 2: Valve Regulated Types First Edition; CENELEC EN
60896-2: 1995
Methods for the Determination of the Lightning Impulse Breakdown
Voltage of Insulating Liquids First Edition; CENELEC EN 60 898:
1991
Electrical Accessories - Circuit-Breakers for Overcurrent Protection
for Household and Similar Installations Second Edition
Radiation Monitoring Equipment for Accident and Post-Accident
Conditions in Nuclear Power Plants Part 2: Equipment for
Continuously Monitoring Radioactive Noble Gases in Gaseous
Effluents First Edition
Radiation Monitoring Equipment for Accident and Post-Accident
Conditions in Nuclear Power Plants Part 3: High Range Area Gamma
Radiation Dose Rate Monitoring Equipment First Edition
Radiation Monitoring Equipment for Accident and Post-Accident
Conditions in Nuclear Power Plants Part 4: Process Stream in Light
Water Nuclear Power Plants First Edition
Nuclear Power Plants - Radiation Monitoring Equipment for
Accident and Post-Accident Conditions Part 5: Radioactivity of Air
in Light Water Nuclear Power Plants First Edition
Aircraft Batteries Part 1: General Test Requirements and
Performance Levels First Edition; (CENELEC EN 60952-1: 1993)
Aircraft Batteries Part 2: Design and Construction Requirements First
Edition; (CENELEC EN 60952-2: 1993)
Semiconductor Devices - Part 12-5: Optoelectronic Devices - Blank
Detail Specification for Pin-Photodiodes with/without Pigtail, for
60747-12-6
60747-14-1
60747-14-2
60747-14-3
60747-16-2
60748-1
60748-2
60748-2-1
60748-2-2
60748-2-3
60748-2-4
60748-2-5
60748-2-6
60748-2-7
60748-2-8
Fibre Optic Systems or Subsystems First Edition; IECQ QC 720105
Semiconductors Devices - Part 12-6: Optoelectronic Devices - Blank
Detail Specification for Avalanche Photodiodes with/without Pigtail,
for Fibre Optic Systems or Subsystems First Edition; QC 720106
Semiconductor Devices - Part 14-1: Semiconductor Sensors - General
and Classification First Edition
Semiconductor Devices - Part 14-2: Semiconductor Sensors - Hall
Elements First Edition
Semiconductor Devices - Part 14-3: Semiconductor Sensors Pressure Sensors First Edition
Semiconductor Devices - Part 16-2: Microwave Integrated Circuits Frequency Prescalers First Edition
Semiconductor Devices - Integrated Circuits Part 1: General First
Edition; (Amendment 1-1991) (Amendment 2-1993) (Amendment 31995)
Semiconductor Devices - Integrated Circuits - Part 2: Digital
Integrated Circuits Second Edition
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section One - Blank Detail Specification for Bipolar
Monolithic Digital Integrated Circuit Gates (Excluding Uncommitted
Logic Arrays) First Edition; (IECQ QC 790132)
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section Two - Family Specification for HCMOS Digital
Integrated Circuits, Series 54/74 HC, 54/74 HCT, 54/74 HCU First
Edition; (Amendment 1-1994) (IECQ QC 790109)
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section Three - Blank Detail Specification for HCMOS
Digital Integrated Circuits (Series 54/74 HC, 54/74 HCT, 54/74
HCU) First Edition; (IECQ QC 790130)
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section Four - Family Specification for Complementary
MOS Digital Integrated Circuits, Series 4 000 B and 4 000 UB First
Edition; (IECQ QC 790104)
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section Five - Blank Detail Specification for Complementary
MOS Digital Integrated Circuits (Series 4 000 B and 4 000 UB) First
Edition; (IECQ QC 790131)
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section Six - Blank Detail Specification for Microprocessor
Integrated Circuits First Edition; (IECQ QC 790110)
Semiconductor Devices Integrated Circuits Part 2: Digital Integrated
Circuits Section Seven - Blank Detail Specification for Integrated
Circuit Fusible-Link Programmable Bipolar Read-Only Memories
First Edition; (IECQ QC 790105)
Semiconductor Devices Integrated Circuits - Part 2: Digital Integrated
Circuits - Section Eight - Blank Detail Specification for Integrated
60748-2-9
60748-2-10
60748-2-11
60748-2-12
60748-2-20
60748-3
60748-4
60748-5
60748-3-1
60748-4-1
60748-4-2
60748-11
60748-11-1
Circuit Static Read/Write Memories First Edition; (IECQ QC
790111)
Semiconductor Devices - Integrated Circuits - Part 2: Digital
Integrated Circuits - Section 9: Blank Detail Specification for MOS
Ultraviolet Light Erasable Electrically Programmable Read-Only
Memories First Edition; (IECQ QC 790106)
Semiconductor Devices - Integrated Circuits - Part 2: Digital
Integrated Circuits - Section 10: Blank Detail Specification for
Integrated Circuit Dynamic Read/Write Memories First Edition;
(IECQ QC 790107)
Semiconductor Devices - Integrated Circuits - Part 2-11: Digital
Integrated Circuits - Blank Detail Specification for Single Supply
Integrated Circuit, Electrically Erasable, and Programmable ReadOnly Memory First Edition; IECQ QC 790108
Semiconductor Devices - Integrated Circuits - Part 2-12: Digital
Integrated Circuits - Blank Detail Specification for Programmable
Logic Devices (PLDs) First Edition; IECQ QC 790121
Semiconductor Devices - Integrated Circuits - Part 2-20: Digital
Integrated Circuits - Family Specification - Low Voltage Integrated
Circuits First Edition
Semiconductor Devices Integrated Circuits Part 3: Analogue
Integrated Circuits First Edition; Amendment 1-1991; Amendment 21994; Corrigendum-06/1996
Semiconductor Devices - Integrated Circuits - Part 4: Interface
Integrated Circuits Second Edition; IECQ QC 790300
Semiconductor Devices - Integrated Circuits - Part 5: Semicustom
Integrated Circuits First Edition
Semiconductor Devices Integrated Circuits Part 3: Analogue
Integrated Circuits Section One - Blank Detail Specification for
Monolithic Integrated Operational Amplifiers First Edition; (IECQ
QC 790202)
Semicondutor Devices - Integrated Circuits - Part 4: Interface
Integrated Circuits - Section 1: Blank Detail Specification for Linear
Digital-to-Analogue Converters (DAC) First Edition; (IECQ QC
790303)
Semiconductor Devices - Integrated Circuits - Part 4: Interface
Integrated Circuits - Section 2: Blank Detail Specification for Linear
Analogue-to-Digital Converters (ADC) First Edition; IECQ QC
790304
Semiconductor Devices - Integrated Circuits Part 11: Sectional
Specification for Semiconductor Integrated Circuits Excluding
Hybrid Circuits First Edition; Amendment 1: 06-1995; Amendment
2: 04-1999
Semiconductor Devices Integrated Circuits Part 11: Section 1:
Internal Visual Examination for Semiconductor Integrated Circuits
Excluding Hybrid Circuits First Edition
60748-20
60748-20-1
60748-21
60748-21-1
60748-22
60748-22-1
60749
60751
60754-1
60754-2
60755
60756
60757
60758
60512-25-3
60512-11-14
Semiconductor Devices - Integrated Circuits - Part 20: Generic
Specification for Film Integrated Circuits and Hybrid Film Integrated
Circuits First Edition; (IECQ QC 760000) (Amendment 1-1995)
Semiconductor Devices - Integrated Circuits - Part 20: Generic
Specification for Film Integrated Circuits and Hybrid Film Integrated
Circuits - Section 1: Requirements for Internal Visual Examination
First Edition; (IECQ QC 763000)
Semiconductor Devices - Integrated Circuits - Part 21: Sectional
Specification for Film Integrated Circuits and Hybrid Film
Intergrated Circuits on the Basis of Qualification Approval
Procedures Second Edition; IECQ QC 760100
Semiconductor Devices - Integrated Circuits - Part 21-1: Blank Detail
Specification for Film Integrated Circuits and Hybrid Film Integrated
Circuits on the Basis of Qualification Approval Procedures Second
Edition; IECQ QC 760101
Semiconductor Devices - Integrated Circuits - Part 22: Sectional
Specification for Film Integrated Circuits and Hybrid Film Integrated
Circuits on the Basis of the Capability Approval Procedures Second
Edition; IECQ QC 760200
Semiconductor Devices - Integrated Circuits - Part 22-1: Blank Detail
Specification for Film Integrated Circuits and Hybrid Film Integrated
Circuits on the Basis of the Capability Approval Procedures Second
Edition; IECQ QC 760201
Semiconductor Devices - Mechanical and Climatic Test Methods
Second Edition; Amendment 1: 07-2000; Amendment 2: 10-2001
Industrial Platinum Resistance Thermometer Sensors First Edition;
Amendment 1-1986; Amendment 2-1995; BS EN 60751: 1996
Test on Gases Evolved During Combustion of Materials from Cables
- Part 1: Determination of the Amount of Halogen Acid Gas Second
Edition
Test on Gases Evolved During Combustion of Electric Cables; Part 2:
Determination of Degree of Acidity of Gases Evolved During the
Combustion of Materials Taken from Electric Cables by Measuring
pH and Conductivity First Edition; Amendment 1-1997
General Requirements for Residual Current Operated Protective
Devices First Edition; (Amendment 1-1988) (Amendment 2-1992)
Non-Broadcast Video Tape Recorders - Time Base Stability Second
Edition; CENELEC EN 60756: 1993
Code for Designation of Colours First Edition
Synthetic Quartz Crystal - Specifications and Guide to the Use
Second Edition; Amendment 1, 05-1997; Amendment 2, 07-2001
Connectors for Electronic Equipment - Test and Measurements - Part
25-3: Test 25c - Rise Time Degradation First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 11: Climatic Tests
- Section 14: Test 11p - Flowing Single Gas Corrosion Test First
60512-12-6
60512-13-1
60512-14-7
60512-15-8
60512-16-20
60512-19-3
60512-20-2
60512-23-3
60512-23-4
60512-25-4
60513
60514
60515
60516
60517
Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 12: Soldering
Tests - Section 6: Test 12f - Sealing Against Flux and Cleaning
Solvents in Machine Soldering First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 13: Mechanical
Operating Tests - Section 1: Test 13a: Engaging and Separating
Forces First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 14: Sealing Tests Section 7: Test 14g: Impacting Water First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 15: Mechanical
Tests on Contacts and Terminations - Section 8: Test 15h - Contact
Retention System Resistance to Tool Application First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods Part 16: Mechanical
Tests on Contacts and Terminations - Section 20: Test 16t:
Mechanical Strength (Wired Termination of Solderless Connections)
First Ed
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 19: Chemical
Resistance Test - Section 3: Test 19c - Fluid Resistance First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 20-2: Test 20b Flammability Tests - Fireproofness First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 23-3: Test 23c:
Shielding Effectiveness of Connectors and Accessories First Edition
Connectors for Electronic Equipment - Tests and Measurements Part 23-4: Screening and Filtering Tests - Test 23d: Transmission
Line Reflections in the Time Domain First Edition
Connectors for Electronic Equipment - Test and Measurements - Part
25-4: Test 25d - Propagation Delay First Edition
Fundamental Aspects of Safety Standards for Medical Electrical
Equipment Second Edition
Acceptance Inspection of Class 2 Alternating-Current Watthour
Meters First Edition
Radiation Detectors for the Instrumentation and Protection of Nuclear
Reactors; Characteristics and Test Methods First Edition
Modular Instrumentation System for Data Handling; CAMAC
System First Edition; Amendment 1-1984
Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages of 72,5
kV and Above Third Edition; Amendment 1-1994; Corrigendum1995
60518
60519-1
60519-2
60519-4
60519-3
60519-5
60519-6
60519-7
60519-8
60519-9
60519-11
60519-21
60521
60522
60523
60524
60525
60526
60527
60528
60529
Dimensional Standardization of Terminals for High-Voltage
Switchgear and Controlgear First Edition
Safety in Electroheat Installations Part I: General Requirements
Second Edition
Safety in Electroheat Installations Part 2: Particular Requirements for
Resistance Heating Equipment Second Edition
Safety in Electroheat Installations - Part 4: Particular Requirements
for Arc Furnace Installations Edition 2.1; Edition 2:1995
Consolidated with Amendment 1:2000
Safety in Electroheat Installations Part 3: Particular Requirements for
Induction and Conduction Heating and Induction Melting
Installations Second Edition; CENELEC EN 60519-3: 1995
Safety in Electroheat Installations Part 5: Specifications for Safety in
Plasma Installations First Edition
Safety in Electroheat Installations Part 6: Specifications for Safety in
Industrial Microwave Heating Equipment First Edition
Safety in Electroheat Installations Part 7: Particular Requirements for
Installations with Electron Guns First Edition
Safety in Electroheat Installations Part 8: Particular Requirements for
Electro-Slag Remelting Furnaces First Edition
Safety in Electroheat Installations Part 9: Particular Requirements for
High-Frequency Dielectric Heating Installations First Edition;
CENELEC EN 60519-9: 1995
Safety in Electroheat Installations - Part 11: Particular Requirements
for Installations for Electromagnetic Stirring, Transport or Pouring of
Metal Liquids First Edition
Safety in Electroheat Installations - Part 21: Particular Requirements
for Resistance Heating Equipment - Heating and Melting Glass
Equipment First Edition
Class 0.5, 1 and 2 Alternating-Current Watthour Meters Second
Edition; Replaces 60170: 1964
Determination of the Permanent Filtration of X-Ray Tube Assemblies
Second Edition
Direct-Current Potentiometers First Edition; Amendment 1-1979;
Amendment 2-1997
Direct-Current Resistive Volt Ratio Boxes First Edition; Amendment
1-1981; Amendment 2-1997
Dimensions of Toroids Made of Magnetic Oxides or Iron Powder
First Edition; Amendment 1-1980
High-Voltage Cable Plug and Socket Connections for Medical X-Ray
Equipment Second Edition
Direct Current Amplifiers; Characteristics and Test Methods First
Edition
Expression of Performance of Air Quality Infra-Red Analyzers First
Edition
Degrees of Protection Provided by Enclosures (IP Code) Edition 2.1;
60530
60531
60532
60533
60534-1
60534-2-1
60534-2-3
60534-2-4
60534-3
60534-3-1
60534-3-2
60534-3-3
60534-4
60534-5
60534-6
60534-6-1
60534-6-2
60534-7
Edition 2:1989 Consolidated with Amendment 1:1999
Methods for Measuring Performance of Electric Kettles and Jugs for
Household and Similar Use First Edition; Amendment 1-1992
Household Electric Thermal Storage Room Heaters - Methods for
Measuring Performance Second Edition
Radiation Protection Instrumentation - Installed Dose Ratemeters,
Warning Assemblies and Monitors - X and Gamma Radiation of
Energy between 50 keV and 7 MeV Second Edition
Electrical and Electronic Installations in Ships - Electromagnetic
Compatibility Second Edition
Industrial-Process Control Valves Part 1: Control Valve Terminology
and General Considerations Second Edition; (CENELEC EN 605341: 1993)
Industrial-Process Control Valves - Part 2-1: Flow-Capacity - Sizing
Equations for Fluid Flow under Installed Conditions First Edition;
Corrigendum: 02/2000
Industrial-Process Control Valves - Part 2-3: Flow Capacity - Test
Procedures Second Edition
Industrial-Process Control Valves Part 2: Flow Capacity Section Four
- Inherent Flow Characteristics and Rangeability First Edition
Industrial-Process Control Valves Part 3: Dimensions Section One Face-to-Face Dimensions for Flanged, Two-Way, Globe-Type
Control Valves First Edition
Industrial-Process Control Valves - Part 3-1: Dimensions - Face-toFace Dimensions for Flanged, Two-Way, Globe-Type, Straight
Pattern and Centre-To-Face Dimensions for Flanged, Two-Way,
Globe-Type, Angle Pattern Control Valves First Edition
Industrial-Process Control Valves - Part 3-2: Dimensions - Face-toFace Dimensions for Rotary Control Valves Except Butterfly Valves
Second Edition
Industrial-Process Control Valves - Part 3-3: Dimensions - End-toEnd Dimensions for Buttweld, Two-Way, Globe-Type, Straight
Pattern Control Valves First Edition
Industrial-Process Control Valves - Part 4: Inspection and Routine
Testing Second Edition
Industrial-Process Control Valves Part 5: Marking First Edition
Industrial-Process Control Valves Part 6: Mounting Details for
Attachment of Positioners to Control Valve Actuators First Edition
Industrial-Process Control Valves - Part 6: Mounting Details for
Attachment of Positioners to Control Valves - Section 1: Positioner
Mounting on Linear Actuators First Edition
Industrial-Process Control Valves - Part 6-2: Mounting Details for
Attachment of Positioners to Control Valves - Positioner Mounting
on Rotary Actuators First Edition
Industrial-Process Control Valves Part 7: Control Valve Data Sheet
First Edition
60534-8-1
60534-8-2
60534-8-3
60534-8-4
60535
60539
60542
60544-1
60544-2
60544-4
60545
60546-1
60546-2
60547
60548
60549
60552
60554-1
60554-2
Industrial-Process Control Valves Part 8: Noise Considerations
Section One - Laboratory Measurement of Noise Generated by
Aerodynamic Flow Through Control Valves First Edition
Industrial-Process Control Valves Part 8: Noise Considerations
Section 2: Laboratory Measurement of Noise Generated by
Hydrodynamic Flow Through Control Valves First Edition
Industrial-Process Control Valves - Part 8-3: Noise Considerations Control Valve Aerodynamic Noise Prediction Method Second
Edition
Industrial-Process Control Valves - Part 8: Noise Considerations Section 4: Prediction of Noise Generated by Hydrodynamic Flow
First Edition
Jet Fans and Regulators First Edition
Directly Heated Negative Temperature Coefficient Thermistors First
Edition
Application Guide for On-Load Tap-Changers First Edition;
(Amendment 1-1988)
Electrical Insulating Materials - Determination of the Effects of
Ionizing Radiation - Part 1: Radiation Interaction and Dosimetry
Second Edition; CENELEC EN 60544-1: 1994
Guide for Determining the Effects of Ionizing Radiation on Insulating
Materials Part 2: Procedures for Irradiation and Test Second Edition
Guide for Determining the Effects of Ionizing Radiation on Insulating
Materials Part 4: Classification System for Service in Radiation
Environments First Edition
Guide for Commissioning, Operation and Maintenance of Hydraulic
Turbines First Edition
Controllers with Analogue Signals for Use in Industrial-Process
Control Systems Part 1: Methods of Evaluating the Performance
Second Edition
Controllers with Analogue Signals for Use in Industrial-Process
Control Systems Part 2: Guidance for Inspection and Routine Testing
First Edition
Modular Plug-In Unit and Standard 19-Inch Rack Mounting Unit
Based on NIM Standard (for Electronic Nuclear Instruments) First
Edition; Amendment 1-1985
Expression of the Properties of Sampling Oscilloscopes First Edition
High-Voltage Fuses for the External Protection of Shunt Power
Capacitors First Edition
CAMAC - Organization of Multi-Crate Systems Specification of the
Branch-Highway and CAMAC Crate Controller Type A1 First
Edition; (Amendment 1-1984)
Specification for Cellulosic Papers for Electrical Purposes Part 1:
Definitions and General Requirements First Edition; Erratum03/1979; Amendment 1-1983
Specification for Cellulosic Papers for Electrical Purposes Part 2:
60554-3-1
60554-3-2
60554-3-3
60554-3-4
60554-3-5
60556
60557
60558
60559
60560
60562
60564
60565
60567
60568
60570
60570-2-1
60571
60574-7
60574-10
Methods of Test First Edition; (Amendment 1-1982) (Amendment 21984) (Corrigendum-1994) (Amendment 3-1995)
Specification for Cellulosic Papers for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 1: General Purpose
Electrical Paper First Edition
Specification for Cellulosic Papers for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 2: Capacitor Paper First
Edition
Specification for Cellulosic Papers for Electrical Purposes Part 3:
Specification for Individual Materials Sheet 3: Crepe Paper First
Edition
Specification for Cellulosic Papers for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 4: Electrolytic Capacitor
Paper First Edition
Specification for Cellulosic Papers for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 5: Special Papers First
Edition
Measuring Methods for Properties of Gyromagnetic Materials
Intended for Application at Microwave Frequencies First Edition;
Amendment 1-1997
IEC Terminology in the Nuclear Reactor Field First Edition
Type C Helical Video Tape Recorders First Edition; (Amendment 11987) (Amendment 2-1993)
Binary Floating-Point Arithmetic for Microprocessor Systems
Second Edition
Definitions and Terminology of Brush-Holders for Electrical
Machines First Edition
Measurements of Incidental Ionizing Radiation from Electronic
Tubes First Edition
D.C. Bridges for Measuring Resistance First Edition; Amendment 11981; Amendment 2-1997
Calibration of Hydrophones First Edition; (Supplement A-1980)
Guide for the Sampling of Gases and of Oil from Oil-Filled Electrical
Equipment and for the Analysis of Free and Dissolved Gases Second
Edition
In-Core Instrumentation for Neutron Fluence Rate (Flux)
Measurements in Power Reactors First Edition
Electrical Supply Track Systems for Luminaires Edition 3.1; Edition
3: 1995 Consolidated with Amendment 1: 1998; Amendment 2: 2000
Electrical Supply Track Systems for Luminaires - Part 2: Mixed
Supply Systems - Section 1: Classes I and III First Edition;
Amendment 1-1996
Electronic Equipment Used on Rail Vehicles Second Edition
Audiovisual, Video and Television Equipment and Systems Part 7:
Safe Handling and Operation of Audiovisual Equipment First Edition
Audiovisual, Video and Television Equipment and Systems Part 10:
60601-2-13
60601-2-15
60574-5
60574-5-2
60601-2-16
60601-2-17
60601-2-18
60601-2-19
60601-2-20
60601-2-21
60601-2-22
60601-2-23
60601-2-24
60645-4
60646
60647
60648
Audio Cassette Systems Second Edition; Amendment 2-1989,
Incorporating Amendment 1
Medical Electrical Equipment - Part 2-13: Particular Requirements
for the Safety of Anaesthetic Workstations Second Edition; ISO
8835-1
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Capacitor Discharge X-Ray Generators First Edition;
(AS/NZS 3200.2.15: 1994)
Audio-Visual, Video and Television Equipment and Systems Part 5:
Control, Synchronization and Address Codes Chapter I:
Synchronized Tape/Visual Operating Practice First Edition
Audio-Visual, Video and Television Equipment and Systems Part 5:
Control, Synchronization and Address Codes Chapter II: Control
Systems for Two Still Projectors Operating Practice First Edition
Medical Electrical Equipment - Part 2-16: Particular Requirements
for the Safety of Haemodialysis, Haemodiafiltration and
Haemofiltration Equipment Second Edition
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Remote-Controlled Automatically-Driven Gamma-Ray
Afterloading Equipment First Edition; AS/NZS 3200.2.17: 1994;
Amendment 1-1996; CENELEC EN 60 601-2-17/A1: 1996
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Endoscopic Equipment Second Edition; Amendment 1,
07-2000
Medical Electrical Equipment Part 2: Particular Requirements for
Safety of Baby Incubators First Edition; (Amendment 1-1996)
Medical Electrical Equipment Part 2: Particular Requirements for
Safety of Transport Incubators First Edition; (Amendment 1-1996)
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Infant Radiant Warmers First Edition; (CENELEC EN
60601-2-21: 1994) (AS/NZS 3200.2.21: 1994) (Amendment 1-1996)
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Diagnostic and Therapeutic Laser Equipment Second
Edition; (CENELEC EN 60601-2-22: 1996)
Medical Electrical Equipment - Part 2-23: Particular Requirements
for the Safety, Including Essential Performance, of Transcutaneous
Partial Pressure Monitoring Equipment Second Edition
Medical Electrical Equipment - Part 2-24: Particular Requirements
for the Safety of Infusion Pumps and Controllers First Edition
Audiometers Part 4: Equipment for Extended High-Frequency
Audiometry First Edition
Test Methods for Crucible Induction Furnaces Second Edition
Dimensions for Magnetic Oxide Cores Intended for Use in Power
Supplies (EC-Cores) First Edition
Method of Test for Coefficients of Friction of Plastic Film and
Sheeting for Use as Electrical Insulation First Edition
60649
60650
60651
60652
60695-5-2
60695-6-1
TS 60695-6-2
60695-6-31
60724
60695-6-30
60725
60726
60727-1
60727-2
60747-7-3
60747-7-4
60747-8
60747-8-1
Calculation of Maximum External Diameter of Cables for Indoor
Installations First Edition
Analogue Counting Ratemeters Characteristics and Test Methods
First Edition
Sound Level Meters Edition 1.2; Edition 1:1979 Consolidated with
Amendments 1:1993 and 2:2000
Loading Tests on Overhead Line Towers First Edition
Fire Hazard Testing - Part 5: Assessment of Potential Corrosion
Damage by Fire Effluent - Section 2: Guidance on the Selection and
Use of Test Methods First Edition
Fire Hazard Testing - Part 6-1: Smoke Opacity - General Guidance
First Edition
Fire Hazard Testing - Part 6-2: Smoke Obscuration - Summary and
Relevance of Test Methods First Edition
Fire Hazard Testing - Part 6-31: Smoke Obscuration - Small-Scale
Static Test - Materials First Edition
Short-Circuit Temperature Limits of Electric Cables with Rated
Voltages 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) Third Edition
Fire Hazard Testing - Part 6: Guidance and Test Methods on the
Assessment of Obscuration Hazard of Vision Caused by Smoke
Opacity from Electrotechnical Products Involved in Fires - Section
30: Small Scale Static Method - Determination of Smoke Opacity De
Considerations on Reference Impedances for Use in Determining the
Disturbance Characteristics of Household Appliances and Similar
Electrical Equipment First Edition
Dry-Type Power Transformers First Edition; (Amendment 1-1986)
Evaluation of Electrical Endurance of Electrical Insulation Systems
Part 1: General Considerations and Evaluation Procedures Based on
Normal Distributions First Edition
Evaluation of Electrical Endurance of Electrical Insulation Systems
Part 2: Evaluation Procedures Based on Extreme-Value Distributions
First Edition
Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors
Section Three - Blank Detail Specification for Bipolar Transistors for
Switching Applications First Edition; IECQ QC 750104
Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors
Section Four - Blank Detail Specification for Case-Rated Bipolar
Transistors for High-Frequency Amplification First Edition; IECQ
QC 750107
Semiconductor Devices - Part 8: Field-Effect Transistors Second
Edition
Semiconductor Devices Discrete Devices Part 8: Field-Effect
Transistors Section One - Blank Detail Specification for Single-Gate
Field-Effect Transistors, up to 5 W and 1 GHz First Edition; IECQ
QC 750112
60747-8-2
60574-11
60574-13
60574-14
60574-15
60574-16
60574-17
60574-18
60574-20
60574-21
60575
60576
60579
60580
60581-1
60581-3
60581-4
60581-5
60581-7
Semiconductor Devices Discrete Devices Part 8: Field-Effect
Transistors Section Two - Blank Detail Specification for Field-Effect
Transistors for Case-Rated Power Amplifier Applications First
Edition; IECQ QC 750106
Audiovisual, Video and Television Equipment and Systems Part 11:
Video Recording Systems - Operating Practices to Facilitate
Browsing First Edition
Audio-Visual, Video and Television Equipment and Systems Part 13:
Digital Counter for Audio Cassette Systems First Edition
Audio-Visual, Video and Television Equipment and Systems Part 14:
Audio Striped Card System First Edition; (Amendment 1-1988)
Audio-Visual, Video and Television Equipment and Systems Part 15:
Audio Pages First Edition
Audio-Visual, Video and Television Equipment and Systems Part 16:
Labelling for Educational Audio Cassettes First Edition; (ANSI
IT7.401-89)
Audiovisual, Video and Television Equipment and Systems Part 17:
Audio-Learning Systems First Edition
Audiovisual, Video and Television Equipment and Systems Part 18:
Connectors for Automatic Slide Projectors with Built-In Triacs for
Audiovisual Application First Edition
Audiovisual, Video and Television Equipment and Systems Part 20:
Methods of Measuring and Reporting the Performance of 16 mm
Sound Film Projectors First Edition
Audiovisual, Video and Television Equipment and Systems Part 21:
Video Tape Leader and Trailer for Education and Training
Applications First Edition
Thermal-Mechanical Performance Test and Mechanical Performance
Test on String Insulator Units First Edition
Portable Bore-Hole Logging Equipment (down to 300 m): General
Characteristics First Edition
Radioactive Aerosol Contamination Meters and Monitors First
Edition
Medical Electrical Equipment - Dose Area Product Meters Second
Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 1: General First Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 3: Record Playing Equipment and Cartridges First
Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 4: Magnetic Recording and Reproducing
Equipment First Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 5: Microphones First Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
60581-8
60581-10
60581-12
60581-13
60582
60583
60584-1
60584-2
60584-3
60587
60588-1
60588-2
60588-3
60588-4
60588-5
60588-6
60589
60590
60594
60598-1
60598-2-1
Requirements Part 7: Loudspeakers First Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 8: Combination Equipment First Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 10: Headphones First Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 12: Sound Output of Television Tuners First
Edition
High Fidelity Audio Equipment and Systems; Minimum Performance
Requirements Part 13: High Fidelity Systems for Use in Vehicles (for
Example, Motor Cars): FM Radio Tuner Units First Edition
Dimensions of Vials for Liquid Scintillation Counting First Edition
Dimensions of Test Tubes Made of Glass or Plastics for
Radioactivity Measurements First Edition; (Supplement A-1981)
Thermocouples Part 1: Reference Tables Second Edition
Thermocouples Part 2: Tolerances First Edition; Amendment 1-1989
Thermocouples Part 3: Extension and Compensating Cables Tolerances and Identification System First Edition
Test Methods for Evaluating Resistance to Tracking and Erosion of
Electrical Insulating Materials Used under Severe Ambient
Conditions Second Edition
Askarels for Transformers and Capacitors Part 1: General First
Edition
Askarels for Transformers and Capacitors Part 2: Test Methods First
Edition
Askarels for Transformers and Capacitors Part 3: Specifications for
New Askarels First Edition
Askarels for Transformers and Capacitors Part 4: Guide for
Maintenance of Transformer Askarel in Equipment First Edition
Askarels for Transformers and Capacitors Part 5: Screening Test for
Compatibility of Materials and Transformer Askarels First Edition
Askarels for Transformers and Capacitors Part 6: Screening Test for
Effects of Materials on Capacitor Askarels First Edition
Methods of Test for the Determination of Ionic Impurities in
Electrical Insulating Materials by Extraction with Liquids First
Edition; Corrigendum-06/1978
Determination of the Aromatic Hydrocarbon Content of New Mineral
Insulating Oils First Edition; Corrigendum-07/1978
Internal Fuses and Internal Overpressure Disconnectors for
Capacitors for Inductive Heat Generating Plants First Edition;
(Amendment 2-1987)
Luminaires - Part 1: General Requirements and Tests Edition 5.0;
Edition 4: 1996 Consolidated with Amendments 1: 1998 and 2: 1999;
Corrigenda IS 01 Thru IS 24:03/2001
Luminaires Part 2: Particular Requirements Section One - Fixed
General Purpose Luminaires First Edition; (Amendment 1-1987)
60598-2-2
60598-2-3
60598-2-4
60598-2-5
60598-2-6
60598-2-7
60598-2-8
60598-2-9
60598-2-10
60598-2-17
60598-2-18
60598-2-19
60598-2-20
60598-2-22
60598-2-23
60598-2-24
60598-2-25
60599
Luminaires - Part 2: Particular Requirements - Section 2: Recessed
Luminaires Edition 2.1; Edition 2: 1996 Consolidated with
Amendment 1: 1997
Luminaires - Part 2: Particular Requirements Section Three:
Luminaires for Road and Street Lighting Edition 2.1; Edition 2: 1993
Consolidated with Amendment 1: 1997; Amendment 2: 12-2000;
Corrigenda IS 01:03/2001; IS 02:03/2001
Luminaires - Part 2: Particular Requirements - Section 4: Portable
General Purpose Luminaires Second Edition
Luminaires - Part 2-5: Particular Requirements - Floodlights Second
Edition; Corrigenda IS 01: 03/2001
Luminaires - Part 2: Particular Requirements - Section 6: Luminaires
with Built-In Transformers for Filament Lamps Second Edition;
Amendment 1-1996; Corrigenda IS 01: 03/2001
Luminaires Part 2: Particular Requirements Section Seven - Portable
Luminaires for Garden Use First Edition; Amendment 1-1987;
Amendment 2-1994
Luminaires - Part 2-8: Particular Requirements - Handlamps Edition
2.1; Edition 2:1996 Consolidated with Amendment 1:2000
Luminaires Part 2: Particular Requirements Section 9: Photo and
Film Luminaires (Non-Professional) Second Edition; (Amendment 11993)
Luminaires Part 2: Particular Requirements Section Ten: Portable
Child-Appealing Luminaires First Edition; (Amendment 1-1990)
(Amendment 2-1995)
Luminaires Part 2: Particular Requirements Section Seventeen Luminaires for Stage Lighting, Television, Film and Photographic
Studios (Outdoor and Indoor) First Edition; (Amendment 2-1990,
Incorporating Amendment 1)
Luminaires Part 2: Particular Requirements Section 18: Luminaires
for Swimming Pools and Similar Applications Second Edition
Luminaires Part 2: Particular Requirements Section Nineteen - AirHandling Luminaires (Safety Requirements) First Edition
Luminaires - Part 2-20: Particular Requirements - Lighting Chains
Edition 2.1; Edition 2: 1996 Consolidated with Amendment 1: 1998;
Corrigenda IS 01: 03/2001
Luminaires - Part 2-22: Particular Requirements - Luminaires for
Emergency Lighting Third Edition
Luminaires - Part 2-23: Particular Requirements - Extra Low Voltage
Lighting Systems for Filament Lamps Edition 1.1; Edition 1:1996
Consolidated with Amendment 1:2000
Luminaires - Part 2-24: Particular Requirements - Luminaires with
Limited Surface Temperatures First Edition
Luminaires for Use in Clinical Areas of Hospitals and Health Care
Buildings First Edition; Corrigendum 09/1994; EN 60598-2-25: 1994
Mineral Oil-Impregnated Electrical Equipment in Service - Guide to
60600
60601-1
60601-1-1
60601-1-2
60601-1-3
60601-1-4
60601-2-1
60601-2-2
60601-2-3
60601-2-4
60601-2-5
60601-2-6
60601-2-7
60601-2-8
60601-2-9
the Interpretation of Dissolved and Free Gases Analysis Second
Edition
Equipment for Minehead Assay and Shorting Radioactive Ores in
Containers First Edition
Medical Electrical Equipment Part 1: General Requirements for
Safety Second Edition; (Amendment 1-1991) (CENELEC EN 606011: 1990) (Amendment 2-1995) (Corrigendum-1995)
Medical Electrical Equipment - Part 1-1: General Requirements for
Safety - Collateral Standard: Safety Requirements for Medical
Electrical Systems Second Edition
Medical Electrical Equipment - Part 1-2: General Requirements for
Safety - Collateral Standard: Electromagnetic Compatibility Requirements and Tests Second Edition
Medical Electrical Equipment - Part 1: General Requirements for
Safety 3. Collateral Standard: General Requirements for Radiation
Protection in Diagnostic X-Ray Equipment First Edition; (CENELEC
EN 60601-1-3: 1994) (AS/NZS 3200.1.3: 1996)
Medical Electrical Equipment - Part 1-4: General Requirements for
Safety - Collateral Standard: Programmable Electrical Medical
Systems Edition 1.1; Edition 1:1996 Consolidated with Amendment
1:1999
Medical Electrical Equipment - Part 2-1: Particular Requirements for
the Safety of Electron Accelerators in the Range 1 MeV to 50 MeV
Second Edition
Medical Electrical Equipment Part 2-2: Particular Requirements for
the Safety of High Frequency Surgical Equipment Third Edition
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Short-Wave Therapy Equipment Second Edition;
Amendment 1-1998
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Cardiac Defibrillators and Cardiac Defibrillator-Monitors
First Edition; (AS/NZS 3200.2.4: 1993)
Medical Electrical Equipment Part 2-5: Particular Requirements for
the Safety of Ultrasonic Physiotherapy Equipment Second Edition
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Microwave Therapy Equipment First Edition; (NZS/AS
3200.2.6: 1992)
Medical Electrical Equipment - Part 2-7: Particular Requirements for
the Safety of High-Voltage Generators of Diagnostic X-Ray
Generators Second Edition
Medical Electrical Equipment - Part 2-8: Particular Requirements for
the Safety of Therapeutic X-Ray Equipment Operating in the Range
10 kV to 1 MV Edition 1.1; Edition 1: 1987 Consolidated with
Amendment 1: 1997
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Patient Contact Dosemeters Used in Radiotherapy with
60601-2-10
60601-2-11
60601-2-12
60601-2-25
60601-2-26
60601-2-29
60601-2-35
60601-2-36
60601-2-27
60601-2-28
60601-2-30
60601-2-31
60601-2-32
60601-2-33
60601-2-34
Electrically Connected Radiation Detectors Second Edition
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Nerve and Muscle Stimulators First Edition Amendment
1:09-2001
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Gamma Beam Therapy Equipment Second Edition
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Lung Ventilators - Critical Care Ventilators Second
Edition; ISO 10651-1
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Electrocardiographs First Edition; Amendment 1: 05-1999
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Electroencephalographs First Edition; (CENELEC EN
60601-2-26: 1994) (AS/NZS 3200.2.26: 1995)
Medical Electrical Equipment Part 2-29: Particular Requirements for
the Safety of Radiotherapy Simulators Second Edition
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Blankets, Pads and Mattresses, Intended for Heating in
Medical Use First Edition
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Equipment for Extracorporeally Induced Lithotripsy
First Edition
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Electrocardiographic Monitoring Equipment First Edition;
(CENELEC EN 60601-2-27: 1994) (AS/NZS 3200.2.27: 1996)
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of X-Ray Source Assemblies and X-Ray Tube Assemblies for
Medical Diagnosis First Edition; CENELEC EN 60601-2-28: 1993;
AS/NZS 3200.2.28: 1994; Replaces 60637: 1979
Medical Electrical Equipment - Part 2-30: Particular Requirements
for the Safety, Including Essential Performance, of Automatic
Cycling Non-Invasive Blood Pressure Monitoring Equipment Second
Edition
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of External Cardiac Pacemakers with Internal Power
Source First Edition; Amendment 1-1998
Medical Electrical Equipment Part 2: Particular Requirements for the
Safety of Associated Equipment of X-Ray Equipment First Edition;
(CENELEC EN 60601-2-32: 1994) (AS/NZS 3200.2.32: 1996)
Medical Electrical Equipment - Part 2: Particular Requirements for
the Safety of Magnetic Resonance Equipment for Medical Diagnosis
First Edition; (CENELEC EN 60601-2-33: 1995) (AS/NZS
3200.2.33: 1996)
Medical Electrical Equipment - Part 2-34: Particular Requirements
for the Safety, Including Essential Performance, of Invasive Blood
Pressure Monitoring Equipment Second Edition
60601-2-37
60601-2-38
60601-2-39
60601-2-40
60601-2-41
60601-2-43
60601-2-44
60601-2-45
60601-2-46
60601-2-49
60601-2-50
60602
60605-2
60601-2-47
60601-3-1
60603-1
60603-2
Medical Electrical Equipment - Part 2-37: Particular Requirements
for the Safety of Ultrasonic Medical Diagnostic and Monitoring
Equipment First Edition
Medical Electrical Equipment - Part 2-38: Particular Requirements
for the Safety of Electrically Operated Hospital Beds First Edition;
Amendment 1: 12-1999
Medical Electrical Equipment - Part 2-39: Particular Requirements
for the Safety of Peritoneal Dialysis Equipment First Edition
Medical Electrical Equipment - Part 2-40: Particular Requirements
for the Safety of Electromyographs and Evoked Response Equipment
First Edition
Medical Electrical Equipment - Part 2-41: Particular Requirements
for the Safety of Surgical Luminaires and Luminaires for Diagnosis
First Edition
Medical Electrical Equipment - Part 2-43: Particular Requirements
for the Safety of X-Ray Equipment for Interventional Procedures
First Edition
Medical Electrical Equipment - Part 2-44: Particular Requirements
for the Safety of X-Ray Equipment for Computed Tomography
Second Edition
Medical Electrical Equipment - Part 2-45: Particular Requirements
for the Safety of Mammographic X-Ray Equipment and
Mammographic Stereotactic Devices Second Edition
Medical Electrical Equipment - Part 2-46: Particular Requirements
for the Safety of Operating Tables First Edition
Medical Electrical Equipment - Part 2-47: Particular Requirements
for the Safety of Multifunction Patient Monitoring Equipment First
Edition
Medical Electrical Equipment - Part 2-50: Particular Requirements
for the Safety of Infant Phototherapy Equipment First Edition;
Corrigendum 1: March 2001
Type B Helical Video Recorders First Edition; (Amendment 1-1987)
Equipment Reliability Testing - Part 2: Design of Test Cycles First
Edition
Medical Electrical Equipment - Part 2-47: Particular Requirements
for the Safety, Including essential Performance, of Ambulatory
Electrocardiographic Systems First Edition
Medical Electrical Equipment - Part 3-1: Essential Performance
Requirements for Transcutaneous Oxygen and Carbon Dioxide
Partial Pressure Monitoring Equipment First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 1: Generic Specification - General Requirements and
Guide for the Preparation of Detail Specifications, with Assessed
Quality Second Edition; (Amendment 1-1992) (IECQ QC 010000)
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards - Part 2: Detail Specification for Two-Part Connectors with
60603-3
60603-4
60603-7
60603-8
60603-9
60603-10
60603-11
60603-12
60603-13
60605-3-1
60605-3-2
60609
60609-2
60603-14
Assessed Quality, for Printed Boards, for Basic Grid of 2,54 mm (0,1
in) with Common Mounting Features Third Edition; IECQ QC 010
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 3: Two-Part Connectors for Printed Boards Having
Contacts Spaced at 2.54 mm (0.100 in) Centres and Staggered
Terminations at That Same Spacing First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 4: Two-Part Connectors for Printed Boards Having
Contacts Spaced at 1.91 mm (0.075 in) Centres and Staggered
Terminations at That Same Spacing First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards - Part 7: Detail Specification for Connectors, 8-Way,
Including Fixed and Free Connectors with Common Mating Features,
with Assessed Quality Second Edition; (IECQ 010000XX0003)
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 8: Two-Part Connectors for Printed Boards for Basic
Grid of 2,54 mm (0,1 in), with Square Male Contacts of 0,63 mm x
0,63 mm First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 9: Two-Part Connectors for Printed Boards, Backpanels
and Cable Connectors, Basic Grid of 2,54 mm (0,1 in) First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 10: Two-Part Connectors for Printed Boards for Basic
Grid of 2,54 mm (0,1 in), Inverted Type First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 11: Detail Specification for Concentric Connectors
(Dimensions for Free Connectors and Fixed Connectors) First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards Part 12: Detail Specification for Dimensions, General
Requirements and Tests for a Range of Sockets Designed for Use
with Integrated Circuits First Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
Boards - Part 13: Detail Specification for Two-Part Connectors of
Assessed Quality, for Printed Boards for Basic Grid of 2,54 mm (0,1
in), with Free Connectors for Non-Accessible Insulation Displa
Equipment Reliability Testing Part 3: Preferred Test Conditions
Indoor Portable Equipment - Low Degree of Simulation First Edition
Equipment Reliability Testing Part 3: Preferred Test Conditions
Equipment for Stationary Use in Weatherprotected Locations - High
Degree of Simulation First Edition
Cavitation Pitting Evaluation in Hydraulic Turbines, Storage Pumps
and Pump-Turbines First Edition
Cavitation Pitting Evaluation in Hydraulic Turbines, Storage Pumps
and Pump-Turbines - Part 2: Evaluation in Pelton Turbines First
Edition
Connectors for Frequencies Below 3 MHz for Use with Printed
60605-3-3
60605-3-4
60605-3-5
60605-3-6
60605-4
60605-6
60610
60613
60614-1
60614-2-1
60614-2-2
60614-2-3
60614-2-4
60614-2-5
Boards - Part 14: Detail Specification for Circular Connectors for
Low-Frequency Audio and Video Applications Such as Audio, Video
and Audio-Visual Equipment First Edition
Equipment Reliability Testing Part 3: Preferred Test Conditions
Section 3: Test Cycle 3: Equipment for Stationary Use in Partially
Weatherprotected Locations - Low Degree of Simulation First
Edition
Equipment Reliability Testing Part 3: Preferred Test Conditions
Section 4: Test Cycle 4: Equipment for Portable and Non-Stationary
Use - Low Degree of Stimulation First Edition
Equipment Reliability Testing - Part 3: Preferred Test Conditions Section 5: Test Cycle 5: Ground Mobile Equipment - Low Degree of
Simulation First Edition; Corrigendum-03/1996
Equipment Reliability Testing - Part 3: Preferred Test Conditions Section 6: Test Cycle 6: Outdoor Transportable Equipment - Low
Degree of Simulation First Edition
Equipment Reliability Testing - Part 4: Statistical Procedures for
Exponential Distribution - Point Estimates, Confidence Intervals,
Prediction Intervals and Tolerance Intervals Second Edition
Equipment Reliability Testing - Part 6: Tests for the Validity of the
Constant Failure Rate or Constant Failure Intensity Assumptions
Second Edition; Corrigendum: 12-2000
Principal Aspects of Functional Evaluation of Electrical Insulation
Systems: Aging Mechanisms and Diagnostic Procedures First Edition
Electrical, Thermal and Loading Characteristics of Rotating Anode
X-Ray Tubes for Medical Diagnosis Second Edition; (AS/NZS 4394:
1996)
Conduits for Electrical Installations - Specification Part 1: General
Requirements Second Edition; (Amendment 1-1995)
Specification for Conduits for Electrical Installations Part 2:
Particular Specification for Conduits Section One - Metal Conduits
First Edition First Edition; Amendment 1: 10-1993
Specification for Conduits for Electrical Installations Part 2:
Particular Specification for Conduits; Section Two - Rigid Plain
Conduits of Insulating Materials First Edition; Amendment 110/1993
Specification for Conduits for Electrical Installations Part 2:
Particular Specifications for Conduits Section Three - Pliable
Conduits of Insulating Material First Edition
Specification for Conduits for Electrical Installations Part 2:
Particular Specifications for Conduits Section Four - Pliable SelfRecovering Conduits of Insulating Materials First Edition;
(Amendment 1-1993)
Specification for Conduits for Electrical Installations Part 2:
Particular Specifications for Conduits Section 5: Flexible Conduits
First Edition
60614-2-6
60615
60616
60617-1
60617-2
60617-3
60614-2-7
60617-4
60617-5
60617-6
60617-7
60617-8
60617-9
60617-10
60617-11
60617-12
60617-13
60618
60619
60620
60621-1
Specification for Conduits for Electrical Installations Part 2:
Particular Specifications for Conduits Section 6: Pliable Conduits of
Metal or Composite Materials First Edition
Terminology for Microwave Apparatus First Edition
Terminal and Tapping Markings for Power Transformers First
Edition
Graphical Symbols for Diagrams Part 1: General Information,
General Index Cross-Reference Tables First Edition
Graphical Symbols for Diagrams Part 2: Symbol Elements,
Qualifying Symbols and Other Symbols Having General Application
Second Edition
Graphical Symbols for Diagrams Part 3: Conductors and Connecting
Devices Second Edition
Conduits for Electrical Installations - Specification Part 2: Particular
Specifications for Conduits Section 7: Rigid Non-Threadable
Conduits of Aluminium Alloy First Edition
Graphical Symbols for Diagrams Part 4: Basic Passive Components
Second Edition
Graphical Symbols for Diagrams Part 5: Semiconductors and
Electron Tubes Second Edition
Graphical Symbols for Diagrams Part 6: Production and Conversion
of Electrical Energy Second Edition
Graphical Symbols for Diagrams Part 7: Switchgear, Controlgear and
Protective Devices Second Edition
Graphical Symbols for Diagrams Part 8: Measuring Instruments,
Lamps and Signalling Devices Second Edition
Graphical Symbols for Diagrams Part 9: Telecommunications:
Switching and Peripheral Equipment Second Edition
Graphical Symbols for Diagrams Part 10: Telecommunications:
Transmission Second Edition
Graphical Symbols for Diagrams Part 11: Architectural and
Topographical Installation Plans and Diagrams Second Edition
Graphical Symbols for Diagrams - Part 12: Binary Logic Elements
Third Edition
Graphical Symbols for Diagrams Part 13: Analogue Elements Second
Edition
Inductive Voltage Dividers First Edition; Amendment 1-1991;
Amendment 2-1997
Electrically Operated Food Preparation Appliances - Measuring
Methods Second Edition; CENELEC EN 60619: 1993; Corrigendum07/1993; Amendment 1-1995
Dimensions for the Mounting of Single-Hole, Bush-Mounted,
Spindle-Operated Electronic Components Second Edition
Electrical Installations for Outdoor Sites under Heavy Conditions
(Including Open-Cast Mines and Quarries) Part 1: Scope and
Definitions Second Edition
60621-2
60621-3
60621-4
60621-5
60622
60623
60624
60625-2
60626-1
60626-2
60625-1
60626-3
60627
60628
60629
60630
Electrical Installations for Outdoor Sites under Heavy Conditions
(Including Open-Cast Mines and Quarries) Part 2: General Protection
Requirements Second Edition
Electrical Installations for Outdoor Sites under Heavy Conditions
(Including Open-Cast Mines and Quarries) Part 3: General
Requirements for Equipment and Ancillaries First Edition;
Amendment 1-1986
Electrical Installations for Outdoor Sites under Heavy Conditions
(Including Open-Cast Mines and Quarries) Part 4: Requirements for
the Installation First Edition; Amendment 1-1987
Electrical Installations for Outdoor Sites under Heavy Conditions
(Including Open-Cast Mines and Quarries) Part 5: Operating
Requirements First Edition
Sealed Nickel-Cadmium Prismatic Rechargeable Single Cells Second
Edition; Amendment 2-1992, Incorporating Amendment 1-1989;
Corrigendum-08/1992, to Amendment 2; CENELEC EN 60622:
1995
Secondary Cells and Batteries Containing Alkaline or Other NonAcid Electrolytes - Vented Nickel-Cadmium Prismatic Rechargeable
Single Cells Fourth Edition
Expression of the Performance of Pulse Generators First Edition
Programmable Measuring Instruments - Interface System (Byte
Serial, Bit Parallel) - Part 2: Codes, Formats, Protocols and Common
Commands Second Edition
Combined Flexible Materials for Electrical Insulation - Part 1:
Definitions and General Requirements Second Edition; (CENELEC
EN 60626-1: 1995) (Amendment 1-1996)
Combined Flexible Materials for Electrical Insulation - Part 2:
Methods of Test Second Edition; CENELEC EN 60626-2: 1995
Programmable Measuring Instruments - Interface System (Byte
Serial, Bit Parallel) - Part 1: Functional, Electrical and Mechanical
Specifications, System Applications and Requirements for the
Designer and User Second Edition
Combined Flexible Materials for Electrical Insulation - Part 3:
Specifications for Individual Materials Second Edition; Amendment
1: 06-1999
Diagnostic X-Ray Imaging Equipment - Characteristics of General
Purpose and Mammographic Anti-Scatter Grids Second Edition;
Replaces IEC 61953: 1997
Gassing of Insulating Liquids under Electrical Stress and Ionization
Second Edition; Corrigendum-10/1986
Standard Sheets for a Modular System (for Installation Accessories
for Use in Domestic and Similar Installations) First Edition
Maximum Lamp Outlines for Incandescent Lamps Edition 2.3;
Edition 2:1994 Consolidated with Amendments 1:1997, 2:1998 and
3:1999
60631
60633
60634
60635
60636
60638
60639
60640
60641-1
60641-2
60641-3-1
60641-3-2
60642
60642-2
60642-3
60644
60645-1
60645-2
60645-3
60654-1
Characteristics and Tests of Electrodynamic and Electromagnetic
Braking Systems First Edition
Terminology for High-Voltage Direct Current (HVDC) Transmission
Second Edition
Heat Test Source (H.T.S.) Lamps for Carrying out Heating Tests on
Luminaires Second Edition; CENELEC EN 60634: 1995
Toroidal Strip-Wound Cores Made of Magnetically Soft Material
First Edition; Amendment 1-1997
Flexible Waveguide Assembly Performance First Edition
Criteria for Assessing and Coding of the Commutation of Rotating
Electrical Machines for Traction First Edition
Nuclear Reactors Use of the Protection System for Non-Safety
Purposes First Edition
CAMAC - Serial Highway Interface System First Edition;
(Amendment 1-1984)
Specification for Pressboard and Presspaper for Electrical Purposes
Part 1: Definitions and General Requirements First Edition;
(Amendment 1-1993) (CENELEC EN 60641-1: 1995)
Specification for Pressboard and Presspaper for Electrical Purposes
Part 2: Methods of Test First Edition; Amendment 1-1993;
Corrigendum-10/1994; CENELEC EN 60 641-2: 1995
Specification for Pressboard and Presspaper for Electrical Purposes
Part 3: Specifications for Individual Materials - Sheet 1:
Requirements for Pressboard, Types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3,
B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 First Edition
Specification for Pressboard and Presspaper for Electrical Purposes
Part 3: Specifications for Individual Materials - Sheet 2:
Requirements for Presspaper, Types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1
and P.7.1 First Edition; CENELEC EN 60641-3-2: 1994
Piezoelectric Ceramic Resonators and Resonator Units for Frequency
Control and Selection Chapter I: Standard Values and Conditions
Chapter II: Measuring and Test Conditions First Edition;
(Amendment 1-1992)
Piezoelectric Ceramic Resonator Units - Part 2: Guide to the Use of
Piezoelectric Ceramic Resonator Units First Edition
Piezoelectric Ceramic Resonators Part 3: Standard Outlines First
Edition
Specification for High-Voltage Fuse-Links for Motor Circuit
Applications First Edition; CENELEC EN 60644: 1993
Electroacoustics - Audiological Equipment - Part 1: Pure-Tone
Audiometers Second Edition
Audiometers Part 2: Equipment for Speech Audiometry First Edition
Audiometers Part 3: Auditory Test Signals of Short Duration for
Audiometric and Neuro-Otological Purposes First Edition;
(CENELEC EN 60645-6: 1995)
Industrial-Process Measurement and Control Equipment - Operating
60654-2
60654-3
60654-4
60655
60657
60658
60660
60661
60662
60371-2
60371-3-1
60371-3-2
60371-3-3
60371-3-4
60371-3-5
60371-3-6
Conditions - Part 1: Climatic Conditions Second Edition; (CENELEC
EN 60654-1: 1993)
Operating Conditions for Industrial-Process Measurement and
Control Equipment Part 2: Power First Edition; (Amendment 1-1992)
(CENELEC HD 413.2 S2: 1994)
Operating Conditions for Industrial-Process Measurement and
Control Equipment Part 3: Mechanical Influences First Edition
Operating Conditions for Industrial-Process Measurement and
Control Equipment Part 4: Corrosive and Erosive Influences First
Edition
Values for the Difference between Free-Field and Pressure Sensitivity
Levels for One-Inch Standard Condenser Microphones First Edition
Non-Ionizing Radiation Hazards in the Frequency Range from 10
MHz to 300 000 MHz First Edition
Radiographic Intensifying Screens for Medical Use - Dimensions
First Edition
Insulators - Tests on Indoor Post Insulators of Organic Material for
Systems with Nominal Voltages Greater Than 1 000 V up to but Not
Including 300 kV Second Edition
Methods for Measuring the Performance of Electric Household
Coffee Makers Second Edition
High-Pressure Sodium Vapour Lamps First Edition; Corrigendum 091981; Amended in Accordance with Amendments: 1-1986; 2-1987;
3-1990; 4-1992; 5-1993; 6-1994; 7-1995; Amendment 8 12-1995;
Amendment 9 04-1997; Amendment 10 09-1997
Specification for Insulating Materials Based on Mica Part 2: Methods
of Test Second Edition; Amendment 1-1994
Specification for Insulating Materials Based on Mica Part 3:
Specifications for Individual Materials Sheet 1: Commutator
Separators and Materials Second Edition
Specification for Insulating Materials Based on Mica Part 3:
Specifications for Individual Materials Sheet 2: Mica Paper First
Edition
Specification for Insulating Materials Based on Mica Part 3:
Specifications for Individual Materials Sheet 3: Specification for
Rigid Mica Materials for Heating Equipment First Edition
Specification for Insulating Materials Based on Mica Part 3:
Specifications for Individual Materials Sheet 4: Polyester FilmBacked Mica Paper with a B-Stage Epoxy Resin Binder First Edition
Specification for Insulating Materials Based on Mica Part 3:
Specifications for Individual Materials Sheet 5: Glass-Backed Mica
Paper with an Epoxy Resin Binder for Post-Impregnation (VPI) First
Edition
Specification for Insulating Materials Based on Mica Part 3:
Specifications for Individual Materials Sheet 6: Glass-Backed Mica
Paper with a B-Stage Epoxy Resin Binder First Edition
60371-3-7
60371-3-9
60372
60373
60374
60375
60371-3-8
60376
60381-1
60381-2
60382
60383-1
60383-2
60384-1
60384-2
60384-2-1
60384-3
60384-3-1
Insulating Materials Based on Mica - Part 3: Specifications for
Individual Materials - Sheet 7: Polyester Film Mica Paper with an
Epoxy Resin Binder for Single Conductor Taping First Edition;
Corrigendum-1995; CENELEC EN 60 371-3-7: 1995
Insulating Materials Based on Mica - Part 3: Specifications for
Individual Materials - Sheet 9: Moulding Micanite First Edition;
Corrigendum-1995
Locking Devices for Ball and Socket Couplings of String Insulator
Units: Dimensions and Tests Third Edition; Amendment 1-1991
Mechanical Coupler for Measurements on Bone Vibrators Second
Edition
Guide for Choosing Modular Dimensions for Waveguide
Components First Edition
Conventions Concerning Electric and Magnetic Circuits First Edition
Insulating Materials Based on Mica - Part 3: Specifications for
Individual Materials - Sheet 8: Mica Paper Tapes for Flame-Resistant
Security Cables First Edition; Corrigendum-1995
Specification and Acceptance of New Sulphur Hexafluoride First
Edition; Supplement A-1973; Supplement B-1974
Analogue Signals for Process Control Systems Part 1: Direct Current
Signals Second Edition
Analogue Signals for Process Control Systems Part 2: Direct Voltage
Signals First Edition
Analogue Pneumatic Signal for Process Control Systems Second
Edition
Insulators for Overhead Lines with a Nominal Voltage Above 1 000
V Part 1: Ceramic or Glass Insulator Units for A.C. Systems Definitions, Test Methods and Acceptance Criteria Fourth Edition
Insulators for Overhead Lines with a Nominal Voltage Above 1 000
V Part 2: Insulator Strings and Insulator Sets for A.C. Systems Definitions, Test Methods and Acceptance Criteria First Edition
Fixed Capacitors for Use in Electronic Equipment - Part 1: Generic
Specification Third Edition; IECQ QC 300000
Fixed Capacitors for Use in Electronic Equipment Part 2: Blank
Detail Specification: Fixed Metallized Polyethylene-Terephthalate
Film Dielectric D.C. Capacitors Assessment Level E Second Edition;
Amendment 1-1987; Amendment 2-1992; IECQ QC 300400
Fixed Capacitors for Use in Electronic Equipment Part 2: Blank
Detail Specification: Fixed Metallized Polyethylene-Terephthalate
Film Dielectric D.C. Capacitors Assessment Level E First Edition;
Amendment 1-1987; IECQ QC 300401
Fixed Capacitors for Use in Electronic Equipment Part 3: Sectional
Specification: Fixed Tantalum Chip Capacitors Second Edition;
IECQ QC 300800
Fixed Capacitors for Use in Electronic Equipment Part 3: Blank
Detail Specification: Fixed Tantalum Chip Capacitors, Assessment
60384-3-101
60384-4
60384-4-1
60384-4-2
60384-5
60386
60387
60390
60384-5-1
60384-6
60384-6-1
60384-7
60384-7-1
60384-8
Level E First Edition; Corrigendum-05/1989; IECQ QC 300801
Fixed Capacitors for Use in Electronic Equipment Part 3-101: Detail
Specification: Fixed Tantalum Chip Capacitors for Surface Mounting
with Solid Electrolyte and Porous Anode, Style L, Assessment Level
E First Edition
Fixed Capacitors for Use in Electronic Equipment Part 4: Sectional
Specification: Aluminium Electrolytic Capacitors with Solid and
Non-Solid Electrolyte Third Edition; QC 300300; Amendment 1; 03
2000
Fixed Capacitors for Use in Electronic Equipment - Part 4: Blank
Detail Specification - Aluminium Electrolytic Capacitors with NonSolid Electrolyte - Assessment Level E Second Edition
Fixed Capacitors for Use in Electronic Equipment Part 4: Blank
Detail Specification: Aluminium Electrolytic Capacitors with Solid
Electrolyte Assessment Level E First Edition; Amendment 1-1992;
Amendment 2-1996; IECQ QC 300302
Fixed Capacitors for Use in Electronic Equipment Part 5: Sectional
Specification: Fixed Mica Dielectric D.C. Capacitors with a Rated
Voltage Not Exceeding 3 000 V - Selection of Methods of Test and
General Requirements Second Edition
Method of Measurement of Speed Fluctuations in Sound Recording
and Reproducing Equipment First Edition; Amendment 1-1988
Symbols for Alternating-Current Electricity Meters Second Edition
Dimensions of Spindle Ends for Manually Operated Electronic
Components First Edition; Supplement A-1976; Amendment 1-1976
Fixed Capacitors for Use in Electronic Equipment Part 5: Blank
Detail Specification: Fixed Mica Dielectric D.C. Capacitors with a
Rated Voltage Not Exceeding 3 000 V - Assessment Level E First
Edition; IECQ QC 301001
Fixed Capacitors for Use in Electronic Equipment Part 6: Sectional
Specification: Fixed Metallized Polycarbonate Film Dielectric D.C.
Capacitors Second Edition; Amendment 1-1992; IECQ QC 300500
Fixed Capacitors for Use in Electronic Equipment Part 6: Blank
Detail Specification: Fixed Metallized Polycarbonate Film Dielectric
D.C. Capacitors Assessment Level E First Edition; IECQ QC 300501
Fixed Capacitors for Use in Electronic Equipment Part 7: Sectional
Specification: Fixed Polystyrene Film Dielectric Metal Foil D.C.
Capacitors Second Edition; IECQ QC 300900; Replaces 60275: 1968
Fixed Capacitors for Use in Electronic Equipment Part 7: Blank
Detail Specification for Fixed Polystyrene Film Dielectric Metal Foil
D.C. Capacitors, Assessment Level E First Edition; IECQ QC
300901
Fixed Capacitors for Use in Electronic Equipment Part 8: Sectional
Specification: Fixed Capacitors of Ceramic Dielectric Second
Edition; Amendment 1-03-1993; IECQ QC 300600; Amendment 206-2000
60384-8-1
60384-9
60384-9-1
60384-10
60384-10-1
60384-11
60384-11-1
60384-12
60392
60393-1
60393-2
60393-3
60384-12-1
60384-13
Fixed Capacitors for Use in Electronic Equipment Part 8: Blank
Detail Specification: Fixed Capacitors of Ceramic Dielectric Class 1
Assessment Level E First Edition; Amendment 1-1993; Amendment
2-2000; IECQ QC 300601
Fixed Capacitors for Use in Electronic Equipment Part 9: Sectional
Specification: Fixed Capacitors of Ceramic Dielectric, Class 2
Second Edition; IECQ QC 300700; Replaces 60187: 1965;
Amendment 1, 08-2000
Fixed Capacitors for Use in Electronic Equipment - Part 9: Blank
Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 2
Assessment Level E First Edition; Corrigendum: 05-1999; IECQ QC
300701
Fixed Capacitors for Use in Electronic Equipment - Part 10: Sectional
Specification: Fixed Multilayer Ceramic Chip Capacitors Second
Edition; Amendment 1-1993; Amendment 2-2000 (English Only);
IECQ QC 301900
Fixed Capacitors for Use in Electronic Equipment Part 10: Blank
Detail Specification: Fixed Multilayer Ceramic Chips Capacitors
Assessment Level E First Edition; Amendment 1-1993; IECQ QC
301901
Fixed Capacitors for Use in Electronic Equipment Part 11: Sectional
Specification: Fixed Polyethylene-Terephthalate Film Dielectric
Metal Foil D.C. Capacitors Second Edition; IECQ QC 300100;
Replaces 60202: 1965
Fixed Capacitors for Use in Electronic Equipment Part 11: Blank
Detail Specification: Fixed Polyethylene-Terephthalate Film
Dielectric Metal Foil D.C. Capacitors Assessment Level E First
Edition; IECQ QC 300101
Fixed Capacitors for Use in Electronic Equipment Part 12: Sectional
Specification: Fixed Polycarbonate Film Dielectric Metal Foil D.C.
Capacitors Second Edition; IECQ QC 301700
Guide for the Drafting of Specifications for Microwave Ferrites First
Edition
Potentiometers for Use in Electronic Equipment Part 1: Generic
Specification Second Edition; Amendment 1-1992
Potentiometers for Use in Electronic Equipment Part 2: Sectional
Specification Lead-Screw Actuated and Rotary Preset Potentiometers
Second Edition; IECQ QC 410100
Potentiometers for Use in Electronic Equipment Part 3: Sectional
Specification: Rotary Precision Potentiometers Second Edition; IECQ
QC 410400
Fixed Capacitors for Use in Electronic Equipment Part 12: Blank
Detail Specification: Fixed Polycarbonate Film Dielectric Metal Foil
D.C. Capacitors Assessment Level E First Edition; IECQ QC 301701
Fixed Capacitors for Use in Electronic Equipment Part 13: Sectional
Specification: Fixed Polypropylene Film Dielectric Metal Foil D.C.
60384-13-1
60384-14
60384-14-1
60384-15
60384-15-1
60384-15-2
60384-15-3
60384-16
60384-16-1
60384-17
60384-17-1
60384-18
Capacitors Second Edition; IECQ QC 301800
Fixed Capacitors for Use in Electronic Equipment Part 13: Blank
Detail Specification: Fixed Polypropylene Film Dielectric Metal Foil
D.C. Capacitors Assessment Level E First Edition; IECQ QC 301801
Fixed Capacitors for Use in Electronic Equipment Part 14: Sectional
Specification: Fixed Capacitors for Electromagnetic Interference
Suppression and Connection to the Supply Mains Second Edition;
IECQ QC 302400; Amendment 1-1995; CAN/CSA-IEC E384-14-95
Fixed Capacitors for Use in Electronic Equipment Part 14: Blank
Detail Specification: Fixed Capacitors for Electromagnetic
Interference Suppression and Connection to the Supply Mains
Assessment Level D First Edition; IECQ QC 302401; CAN/CSAIEC E384-14-1-9
Fixed Capacitors for Use in Electronic Equipment Part 15: Sectional
Specification: Fixed Tantalum Capacitors with Non-Solid or Solid
Electrolyte First Edition; Amendment 1-1987; Amendment 2-1992;
IECQ QC 300200; Replaces 60361: 1971
Fixed Capacitors for Use in Electronic Equipment Part 15: Blank
Detail Specification: Fixed Tantalum Capacitors with Non-Solid
Electrolyte and Foil Electrode Assessment Level E First Edition;
IECQ QC 300203
Fixed Capacitors for Use in Electronic Equipment Part 15: Blank
Detail Specification: Fixed Tantalum Capacitors with Non-Solid
Electrolyte and Porous Anode Assessment Level E First Edition;
IECQ QC 300202
Fixed Capacitors for Use in Electronic Equipment Part 15: Blank
Detail Specification: Fixed Tantalum Capacitors with Solid and
Porous Anode Assessment Level E First Edition; Amendment 11992; IECQ QC 300201
Fixed Capacitors for Use in Electronic Equipment Part 16: Sectional
Specification: Fixed Metallized Polypropylene Film Dielectric D.C.
Capacitors First Edition; Amendment 1-1987; Amendment 2-1992;
IECQ QC 301200
Fixed Capacitors for Use in Electronic Equipment Part 16: Blank
Detail Specification: Fixed Metallized Polypropylene Film Dielectric
D.C. Capacitors Assessment Level E First Edition; Amendment 11987; IECQ QC 301201
Fixed Capacitors for Use in Electronic Equipment Part 17: Sectional
Specification: Fixed Metallized Polypropylene Film Dielectric A.C.
and Pulse Capacitors First Edition; IECQ QC 301300
Fixed Capacitors for Use in Electronic Equipment Part 17: Blank
Detail Specification: Fixed Metallized Polypropylene Film Dielectric
A.C. and Pulse Capacitors Assessment Level E First Edition; IECQ
QC 301301
Fixed Capacitors for Use in Electronic Equipment Part 18: Sectional
Specification: Fixed Aluminium Electrolytic Chip Capacitors with
60393-3-1
60393-4
60384-18-1
60384-18-2
60384-19
60384-19-1
60384-20
60384-20-1
60388-1
60389-1
60393-2-1
60393-2-2
60393-2-101
Solid and Non-Solid Electrolyte First Edition; IECQ QC 302300;
Amendment 1-1998
Potentiometers for Use in Electronic Equipment Part 3: Blank Detail
Specification: Rotary Precision Potentiometers Assessment Level E
First Edition; IECQ QC 410402
Potentiometers for Use in Electronic Equipment Part 4: Sectional
Specification: Single-Turn Rotary Power Potentiometers Second
Edition; IECQ QC 410200
Fixed Capacitors for Use in Electronic Equipment Part 18: Blank
Detail Specification: Fixed Aluminium Electrolytic Chip Capacitors
with Solid Electrolyte Assessment Level E First Edition; IECQ QC
302301; Amendment 1 03 1998
Fixed Capacitors for Use in Electronic Equipment Part 18: Blank
Detail Specification: Fixed Aluminium Electrolytic Chip Capacitors
with Non-Solid Electrolyte Assessment Level E First Edition; IECQ
QC 302302
Fixed Capacitors for Use in Electronic Equipment Part 19: Sectional
Specification: Fixed Metallized Polyethylene-Terephthalate Film
Dielectric Chip D.C. Capacitors First Edition; IECQ QC 302200
Fixed Capacitors for Use in Electronic Equipment Part 19: Blank
Detail Specification: Fixed Metallized Polyethylene-Terephthalate
Film Dielectric Chip D.C. Capacitors Assessment Level E First
Edition; IECQ QC 302201
Fixed Capacitors for Use in Electronic Equipment - Part 20: Sectional
Specification: Fixed Metallized Polyphenylene Sulfide Film
Dielectric Chip D.C. Capacitors First Edition; IECQ QC 302000
Fixed Capacitors for Use in Electronic Equipment - Part 20: Blank
Detail Specification: Fixed Metallized Polyphenylene Sulfide Film
Dielectric Chip D.C. Capacitors Assessment Level EZ First Edition;
IECQ QC 302001
Thermal Time Delay Switches for Use in Equipment for
Telecommunication and in Electronic Applications Employing
Similar Techniques Part 1: General Requirements and Measuring
Methods First Edition
Thermostatic Switches Primarily for Use in Equipment for
Telecommunications and in Electronic Applications Employing
Similar Techniques Part 1: General Requirements and Measuring
Methods First Edition; Amendment 1-1976
Potentiometers for Use in Electronic Equipment Part 2: Blank Detail
Specification: Lead-Screw Actuated and Rotary Preset
Potentiometers Assessment Level E First Edition; IECQ QC 410101
Potentiometers for Use in Electronic Equipment Part 2: Blank Detail
Specification: Lead-Screw Actuated and Rotary Preset
Potentiometers Assessment Level F First Edition; IECQ QC 410102
Potentiometers for Use in Electronic Equipment - Part 2: Detail
Specification: Lead-Screw Actuated Preset Potentiometers - Stability
60393-4-1
60393-4-2
60393-5
60394-1
60394-2
60394-3-1
60396
60397
60393-5-1
60393-5-2
60394-3-2
60398
60399
60400
60401
60404-1
60404-2
60404-3
Class 5% - Assessment Level E First Edition; IECQ QC
410101XX0001
Potentiometers for Use in Electronic Equipment Part 4: Blank Detail
Specification: Single-Turn Rotary Power Potentiometers Assessment
Level E First Edition; IECQ QC 410203
Potentiometers for Use in Electronic Equipment Part 4: Blank Detail
Specification: Single-Turn Rotary Power Potentiometers Assessment
Level F First Edition; IECQ QC 410204
Potentiometers for Use in Electronic Equipment Part 5: Sectional
Specification: Single-Turn Rotary Low-Power Wirewound and NonWirewound Potentiometers Second Edition; IECQ QC 410300
Varnished Fabrics for Electrical Purposes Part 1: Definitions and
General Requirements First Edition
Varnished Fabrics for Electrical Purposes Part 2: Methods of Test
First Edition
Varnished Fabrics for Electrical Purposes Part 3: Specifications for
Individual Materials Sheet 1: Oleoresinous Varnish-Cotton Base,
OR/C First Edition
Test Methods for Induction Channel Furnaces Second Edition
Test Methods for Batch Furnaces with Metallic Heating Resistors
Second Edition
Potentiometers for Use in Electronic Equipment Part 5: Blank Detail
Specification: Single-Turn Rotary Low-Power Potentiometers
Assessment Level E First Edition; IECQ QC 410301
Potentiometers for Use in Electronic Equipment Part 5: Blank Detail
Specification: Single-Turn Rotary Low-Power Potentiometers
Assessment Level F First Edition; IECQ QC 410302
Varnished Fabrics for Electrical Purposes Part 3: Specifications for
Individual Materials Sheet 2: Glass-Fabric Based Varnished Fabrics
with Epoxy, Polyurethane, Silicone, Polyester, Bituminous or
Oleoresinous Varnish First Edition
Industrial Electroheating Intallations - General Test Methods Second
Edition
Standard Sheets for Barrel Thread for E14 and E27 Lampholders with
Shade Holder Ring First Edition; Amendment 1: 08-1997;
Amendment 2: 02-1999
Lampholders for Tubular Fluorescent Lamps and Starterholders Sixth
Edition
Ferrite Materials - Guide on the Format of Data Appearing in
Manufacturers' Catalogues of Transformer and Inductor Cores
Second Edition
Magnetic Materials - Part 1: Classification Second Edition
Magnetic Materials Part 2: Methods of Measurement of Magnetic
Properties of Electrical Steel Sheet and Strip by Means of an Epstein
Frame Third Edition
Magnetic Materials Part 3: Methods of Measurement of the Magnetic
60404-4
60404-5
60404-6
60404-7
60404-8-1
60404-8-2
60404-8-3
60404-8-4
60404-8-5
60404-8-6
60404-8-9
60404-9
60404-8-7
60404-8-8
60404-8-10
60404-10
Properties of Magnetic Sheet and Strip by Means of a Single Sheet
Tester Second Edition
Magnetic Materials - Part 4: Methods of Measurement of d.c.
Magnetic Properties of Magnetically Soft Materials Edition 2.1;
Consolidated with Amendment 1
Magnetic Materials - Part 5: Permanent Magnet (Magnetically Hard)
Materials - Methods of Measurement of Magnetic Properties Second
Edition
Magnetic Materials Part 6: Methods of Measurement of the Magnetic
Properties of Isotropic Nickel-Iron Soft Magnetic Alloys, Types E1,
E3 and E4 First Edition
Magnetic Materials Part 7: Method of Measurement of the Coercivity
of Magnetic Materials in an Open Magnetic Circuit First Edition
Magnetic Materials Part 8-1: Specifications for Individual Materials Magnetically Hard Materials Second Edition
Magnetic Materials - Part 8-2: Specifications for Individual Materials
- Cold-Rolled Electrical Alloyed Steel Sheet and Strip Delivered in
the Semi-Processed State Second Edition
Magnetic Materials - Part 8-3: Specifications for Individual Materials
- Cold-Rolled Electrical Non-Alloyed Steel Sheet and Strip Delivered
in the Semi-Processed State Second Edition
Magnetic Materials - Part 8-4: Specifications for Individual Materials
- Cold-Rolled Non-Oriented Electrical Steel Sheet and Strip
Delivered in the Fully-Processed State Second Edition
Magnetic Materials Part 8: Specifications for Individual Materials
Section Five - Specification for Steel Sheet and Strip with Specified
Mechanical Properties and Magnetic Permeability First Edition
Magnetic Materials - Part 8-6: Specifications for Individual Materials
- Soft Magnetic Metallic Materials Second Edition
Magnetic Materials Part 8: Specification for Individual Materials
Section 9: Standard Specification for Sintered Soft Magnetic
Materials First Edition
Magnetic Materials Part 9: Methods of Determination of the
Geometrical Characteristics of Magnetic Steel Sheet and Strip First
Edition
Magnetic Materials - Part 8-7: Specifications for Individual Materials
- Cold-Rolled Grain-Oriented Electrical Steel Sheet and Strip
Delivered in the Fully-Processed State Second Edition
Magnetic Materials Part 8: Specifications for Individual Materials
Section 8 - Specification for Thin Magnetic Steel Strip for Use at
Medium Frequencies First Edition
Magnetic Materials - Part 8: Specifications for Individual Materials Section 10: Specification for Magnetic Materials (Iron and Steel) for
Use in Relays First Edition
Magnetic Materials Part 10: Methods of Measurement of Magnetic
Properties of Magnetic Steel Sheet and Strip at Medium Frequencies
60404-11
60404-12
60404-13
60405
60406
60417-2
60418-1
60418-2
60418-3
60418-4
60420
60422
60423
60424-1
60424-2
60424-3
60424-4
60425
60426
First Edition
Magnetic Materials - Part 11: Method of Test for the Determination
of Surface Insulation Resistance of Magnetic Sheet and Strip Edition
1.1; Edition 1:1991 Consolidated with Amendment 1: 1998
Magnetic Materials Part 12: Guide to Methods of Assessment of
Temperature Capability of Interlaminar Insulation Coatings First
Edition
Magnetic Materials - Part 13: Methods of Measurement of Density,
Resistivity and Stacking Factor of Electrical Steel Sheet and Strip
First Edition
Nuclear Instruments: Constructional Requirements to Afford Personal
Protection Against Ionizing Radiation First Edition
Cassettes for Medical X-Ray Diagnosis - Radiographic Cassettes and
Mammographic Cassettes Third Edition
Graphical Symbols for Use on Equipment - Part 2: Symbol Originals
First Edition; Amendment 1 10-2000
Variable Capacitors Part 1: Terms and Methods of Test First Edition;
Amendment 1-1976; Amendment 2-1981
Variable Capacitors Part 2: Type Specification for Variable Tuning
Capacitors Type A First Edition; Supplement A-1980; Supplement B1980; Amendment 1-1981
Variable Capacitors Part 3: Type Specification for Variable Trimmer
Capacitors Type B Blank Detail Specification First Edition;
Supplement A-1980
Variable Capacitors Part 4: Type Specification for Variable Pre-Set
Capacitors Type C Blank Detail Specification First Edition;
Supplement A-1980
High-Voltage Alternating Current Switch-Fuse Combinations Second
Edition
Supervision and Maintenance Guide for Mineral Insulating Oils in
Electrical Equipment Second Edition
Conduits for Electrical Purposes - Outside Diameters of Conduits for
Electrical Installations and Threads for Conduits and Fittings Second
Edition
Ferrite Cores - Guide on the Limits of Surface Irregularities - Part 1:
General Specification First Edition
Guidance on the Limits of Surface Irregularities of Ferrite Cores Part 2: RM-Cores First Edition
Ferrite Cores - Guide on the Limits of Surface Irregularities - Part 3:
ETD-Cores and E-Cores First Edition
Ferrite Cores - Guide on the Limits of Surface Irregularities - Part 4:
Ring-Cores First Edition
Guide for the Choice of Colours to Be Used for the Marking of
Capacitors and Resistors First Edition
Test Methods for Determining Electrolytic Corrosion with Insulating
Materials First Edition
60427
60428
60431
60432-1
60432-2
60433
60434
60436
60437
60438
60439-1
60439-2
60439-3
60439-4
60439-5
60440
60441
60442
Synthetic Testing of High-Voltage Alternating Current CircuitBreakers Third Edition
Standard Cells First Edition; CENELEC HD 612 S1: 1992
Dimensions of Square Cores (RM-Cores) Made of Magnetic Oxides
and Associated Parts Second Edition; Amendment 1-1995;
Amendment 2-1996
Incandescent Lamps - Safety Specifications - Part 1: Tungsten
Filament Lamps for Domestic and Similar General Lighting Purposes
Second Edition
Incandescent Lamps - Safety Specifications - Part 2: Tungsten
Halogen Lamps for Domestic and Similar General Lighting Purposes
Second Edition
Insulators for Overhead Lines with a Nominal Voltage Above 1 000
V - Ceramic Insulators for a.c. Systems - Characteristics of Insulator
Units of the Long Rod Type Third Edition
Aircraft Electrical Filament Lamps First Edition; Amendment 11981; Amendment 2-1984
Methods for Measuring the Performance of Electric Dishwashers
Second Edition; Corrigendum-1982; Amendment 1-1984;
Amendment 2-1992; Amendment 3-1994; Corrigendum-1998
Radio Interference Test on High-Voltage Insulators Second Edition
Tests and Dimensions for High-Voltage D.C. Insulators First Edition
Low-Voltage Switchgear and Controlgear Assemblies Part 1: TypeTested and Partially Type-Tested Assemblies Fourth Edition
Low-Voltage Switchgear and Controlgear Assemblies Part 2:
Particular Requirements for Busbar Trunking Systems (Busways)
Third Edition
Low-Voltage Switchgear and Controlgear Assemblies - Part 3:
Particular Requirements for Low-Voltage Switchgear and
Controlgear Assemblies Intended to Be Installed in Places Where
Unskilled Persons Have Access for Their Use - Distribution Boards
Edition 1.2
Low-Voltage Switchgear and Controlgear Assemblies - Part 4:
Particular Requirements for Assemblies for Construction Sites (ACS)
Edition 1.2; Edition 1: 1990 Consolidated with Amendments 1: 1995
and 2: 1999
Low-Voltage Switchgear and Controlgear Assemblies - Part 5:
Particular Requirements for Assemblies Intended to be Installed
Outdoors in Public Places - Cable Distribution Cabinets (CDCs) for
Power Distribution in Networks Edition 1.1; Edition 1: 1996 Conso
Method of Measurement of Non-Linearity in Resistors First Edition;
Corrigendum-09/1974
Photometric and Colorimetric Methods of Measurement of the Light
Emitted by a Cathode-Ray Tube Screen First Edition
Electric Toasters for Household and Similar Purposes - Methods for
Measuring the Performance Second Edition
60443
60444-1
60444-6
60446
60447
60449
60450
60444-2
60444-4
60444-5
60445
60454-1
60454-2
60454-3-1
60454-3-2
60454-3-3
Stabilized Supply Apparatus for Measurement First Edition
Measurement of Quartz Crystal Unit Parameters by Zero Phase
Technique in a Pi-Network - Part 1: Basic Method for the
Measurement of Resonance Frequency and Resonance Resistance of
Quartz Crystal Units by Zero Phase Technique in a Pi-Network
Second Edition;
Measurement of Quartz Crystal Unit Parameters - Part 6:
Measurement of Drive Level Dependence (DLD) First Edition
Basic and Safety Principles for Man-Machine Interface, Marking and
Identification - Identification of Conductors by Colours or Numerals
Third Edition
Man-Machine Interface (MMI) - Actuating Principles Second Edition
Voltage Bands for Electrical Installations of Buildings First Edition;
Amendment 1-1979
Measurement of the Average Viscometric Degree of Polymerization
of New and Aged Electrical Papers First Edition
Measurement of Quartz Crystal Unit Parameters by Zero Phase
Technique in a PI-Network Part 2: Phase Offset Method for
Measurement of Motional Capacitance of Quartz Crystal Units First
Edition
Measurement of Quartz Crystal Unit Parameters by Zero Phase
Technique in a PI-Network Part 4: Method for the Measurement of
the Load Resonance Frequency FL, Load Resonance Resistance RL
and the Calculation of Other Derived Values of Quartz Crystal Units,
u
Measurement of Quartz Crystal Unit Parameters - Part 5: Methods for
the Determination of Equivalent Electrical Parameters Using
Automatic Network Analyzer Techniques and Error Correction First
Edition
Basic and Safety Principles for Man-Machine Interface, Marking and
Identification - Identification of Equipment Terminals and of
Terminations of Certain Designated Conductors, Including General
Rules for an Alphanumeric System Third Edition
Specifications for Pressure-Sensitive Adhesive Tapes for Electrical
Purposes Part 1: General Requirements Second Edition
Specification for Pressure-Sensitive Adhesive Tapes for Electrical
Purposes Part 2: Methods of Test Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3-1:
Specifications for Individual Materials - PVC Film Tapes with
Pressure-Sensitive Adhesive Second Edition; Amendment 1:5-2001
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 2: Polyester Film
Tapes with Rubber Thermosetting or Acrylic Crosslinked Adhesives
Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 3: Polyester Film
60454-3-4
60454-3-5
60454-3-6
60454-3-7
60454-3-8
60454-3-9
60455-1
60455-2
60456
60454-3-10
60454-3-11
60454-3-12
60454-3-13
60454-3-14
Tapes with Rubber Thermoplastic Adhesive Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials Sheet 4: Cellulosic Paper,
Creped, with Rubber Thermosetting Adhesive Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 5: Cellulosic Paper,
Non-Creped, with Rubber Thermosetting Adhesive Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 6: Polycarbonate Film
Tapes with Acrylic Thermoplastic Adhesive Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 7: Polyimide Film
Tapes with Pressure-Sensitive Adhesive Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 8: Glass Fabric with
Pressure-Sensitive Adhesive Second Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 9: Cellulose Acetate
Woven Fabric Tapes with Rubber Thermosetting Adhesives First
Edition
Resin Based Reactive Compounds Used for Electrical Insulation Part 1: Definitions and General Requirements Second Edition
Resin Based Reactive Compounds Used for Electrical Insulation Part 2: Methods of Test Second Edition
Clothes Washing Machines for Household Use - Methods for
Measuring the Performance Third Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3:
Specifications for Individual Materials - Sheet 10: Requirements for
Cellulose-Acetate-Butyrate Film Tapes with Rubber Thermosetting
Adhesive First Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 11: Combination
Tapes Made of Creped Cellulosic Paper and Polyethylene
Terephthalate Film with Rubber Thermosetting Adhesive First
Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 12: Polyethylene Film
Tapes with Pressure-Sesitive Adhesive First Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3:
Specifications for Individual Materials - Sheet 13: Requirements for
Combined Cellulose-Viscose Woven Fabric Tapes, One Side
Covered with a Thermoplastic Material, the Other Side with Rubber
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 14:
Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive
First Edition
60454-3-15
60454-3-17
60455-2-2
60455-3-1
60455-3-2
60455-3-3
60455-3-4
60455-3-5
60457-1
60461
60462
60464-1
60464-2
60455-3-11
60457-2
60457-3
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 4:
Specifications for Individual Materials - Sheet 15: Polyester
Film/Polyester Non-Woven Combinations with Rubber
Thermosetting Adhesive First Edition
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3:
Specifications for Individual Materials - Sheet 17: Polyester/Epoxy
Combinations with Pressure-Sensitive Adhesive First Edition
Specification for Solventless Polymerisable Resinous Compounds
Used for Electrical Insulation Part 2: Methods of Test Test Methods
for Coating Powders for Electrical Purposes First Edition
Specification for Solventless Polymerisable Resinous Compounds
Used for Electrical Insulation Part 3: Specifications for Individual
Materials Sheet 1: Unfilled Epoxy Resinous Compounds First Edition
Specification for Solventless Polymerisable Resinous Compounds
Used for Electrical Insulation Part 3: Specifications for Individual
Materials Sheet 2: Quartz Filled Epoxy Resinous Compounds First
Edition; Amendment 1-1994
Specification for Solventless Polymerisable Resinous Compounds
Used for Electrical Insulation Part 3: Specifications for Individual
Materials Sheet 3: Unfilled Polyurethane Compounds First Edition
Specification for Solventless Polymerisable Resinous Compounds
Used for Electrical Insulation Part 3: Specifications for Individual
Materials Sheet 4: Filled Polyurethane Compounds First Edition
Resin Based Reactive Compounds used for Electrical Insulation Part 3: Specifications for Individual Materials - Sheet 5: Unsaturated
Polyester Based Impregnating Resins Second Edition
Rigid Precision Coaxial Lines and Their Associated Precision
Connectors Part 1: General Requirements and Measuring Methods
First Edition
Time and Control Code for Video Tape Recorders Third Edition
Standard Test Procedures for Photomultiplier Tubes for Scintillation
Counting First Edition
Varnishes Used for Electrical Insulation - Part 1: Definitions and
General Requirements Second Edition
Varnishes Used for Electrical Insulation - Part 2: Methods of Test
Second Edition
Specification for Solventless Polymerisable Resinous Compounds
Used for Electrical Insulation Part 3: Specifications for Individual
Materials Sheet 11: Epoxy Resin-Based Coating Powders First
Edition
Rigid Precision Coaxial Lines and Their Associated Precision
Connectors Part 2: 50 Ohm 7 mm Rigid Precision Coaxial Line and
Associated Hermaphroditic Precision Coaxial Connector First Edition
Rigid Precision Coaxial Lines and Their Associated Precision
Connectors Part 3: 14 mm Rigid Precision Coaxial Line and
Associated Hermaphroditic Precision Coaxial Connector -
60457-4
60457-5
60464-3-1
60464-3-2
60465
60466
60468
60469-1
60469-2
60470
60471
60475
60476
60477
60477-2
60478-1
60478-4
60478-5
TR 60479-1
TR 60479-3
Characteristic Impedances 50 Ohms and 75 Ohms Second Edition
Rigid Precision Coaxial Lines and Their Associated Precision
Connectors Part 4: 21 mm Rigid Precision Coaxial Line and
Associated Hermaphroditic Precision Coaxial Connector
Characteristic Impedance 50 Ohms (Type 9/21) - Characteristic
Impedance 75 Ohms (Ty
Rigid Precision Coaxial Lines and Their Associated Precision
Connectors Part 5: 50 Ohms 3.5 mm Rigid Precision Coaxial Line
with Provision for Mounting Connectors First Edition
Varnishes used for Electrical Insulation - Part 3: Specifications for
Individual Materials - Sheet 1: Ambient Curing Finishing Varnishes
Second Edition
Varnishes used for Electrical Insulation - Part 3: Specifications for
Individual Materials - Sheet 2: Hot Curing Impregnating Varnishes
Second Edition
Specification for Unused Insulating Mineral Oils for Cables with Oil
Ducts Second Edition
A.C. Insulation-Enclosed Switchgear and Controlgear for Rated
Voltages Above 1 kV and up to and Including 38 kV Second Edition;
Amendment 1-1994
Method of Measurement of Resistivity of Metallic Materials First
Edition
Pulse Techniques and Apparatus Part 1: Pulse Terms and Definitions
Second Edition
Pulse Techniques and Apparatus Part 2: Pulse Measurement and
Analysis, General Considerations Second Edition
High-Voltage Alternating Current Contactors and Contactor-Based
Motor-Starters Second Edition; Cancels and Replaces IEC 60632-1
Dimensions of Clevis and Tongue Couplings of String Insulator Units
Second Edition; Amendment 1-1980
Method of Sampling Liquid Dielectrics First Edition
Nuclear Instrumentation - Electrical Measuring Systems and
Instruments Utilizing Ionizing Radiation Sources - General Aspects
Second Edition
Laboratory d.c. Resistors First Edition; Amendment 1-1997
Laboratory Resistors Part 2: Laboratory a.c. Resistors First Edition;
Amendment 1-1997
Stabilized Power Supplies, D.C. Output Part 1: Terms and
Definitions First Edition
Stabilized Power Supplies, D.C. Output Part 4: Tests Other Than
Radio-Frequency Interference First Edition
Stabilized Power Supplies, D.C. Output Part 5: Measurement of the
Magnetic Component of the Reactive Near Field First Edition
Effects of Current on Human Beings and Livestock - Part 1: General
Aspects Third Edition
Effects of Current on Human Beings and Livestock - Part 3: Effects
60480
60479-2
60481
60512-5
60512-6
60512-6-5
60512-7
60512-8
60512-9
60512-10-4
60512-11-1
60512-11-7
60574-1
60574-2
60574-3
of Currents Passing Through the Body of Livestock First Edition
Guide to the Checking of Sulphur Hexafluoride (SF6) Taken from
Electrical Equipment First Edition
Effects of Current Passing Through the Human Body Part 2: Special
Aspects Chapter 4: Effects of Alternating Current with Frequencies
Above 100 Hz Chapter 5: Effects of Special Waveforms of Current
Chapter 6: Effects of Unidirectional Single Impulse Current
Coupling Devices for Power Line Carrier Systems First Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 5: Impact Tests
(Free Components), Static Load Tests (Fixed Components),
Endurance Tests and Overload Tests Second Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 6: Climatic Tests
and Soldering Tests Second Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 6: Dynamic Stress
Tests - Section 5: Test 6e: Random Vibration First Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 7: Mechanical
Operating Tests and Sealing Tests Third Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 8: Connector Tests
(Mechanical) and Mechanical Tests on Contacts and Terminations
Third Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 9: Miscellaneous
Tests Second Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 10: Impact Tests
(Free Components), Static Load Tests (Fixed Components),
Endurance Tests and Overload Tests - Section 4: Test 10d: Electrical
Ove
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods Part 11: Climatic Tests
Section 1: Test 11a - Climatic Sequence First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods Part 11: Climatic Tests Section 7: Test 11g: Flowing Mixed Gas Corrosion Test First Edition
Audio-Visual, Video and Television Equipment and Systems Part 1:
General First Edition
Audiovisual, Video and Television Equipment and Systems Part 2:
Definition of General Terms Second Edition
Audio-Visual, Video and Television Equipment and Systems Part 3:
Connectors for the Interconnection of Equipment in Audio-Visual
Systems First Edition
60482
60483
60485
60487-1
60487-2-1
60487-2-4
60487-2-2
60487-2-3
60487-2-5
60487-2-6
60487-2-7
60487-2-8
60487-3
60487-3-2
60487-3-3
60487-3-4
60487-3-5
Dimensions of Electronic Instrument Modules (for Nuclear
Electronic Instruments) First Edition
Guide to Dynamic Measurements of Piezoelectric Ceramics with
High Electromechanical Coupling First Edition
Digital Electronic D.C. Voltmeters and D.C. Electronic Analogue-toDigital Convertors First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 1: Measurements Common to Sub-Systems and
Simulated Radio-Relay Systems Second Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section One General First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Four Frequency Modulators First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Two Stand-By Channel Switching Equipment First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Three
- R.F. Branching Networks First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Five Frequency Demodulators First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Six Diversity, Twin-Path and Hot Stand-By Equipment First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Seven
- Radio Transmitters First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 2: Measurements for Sub-Systems Section Eight Radio Receivers First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 3: Simulated Systems First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 3: Simulated Systems Section Two Measurements in the Baseband First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 3: Simulated Systems Section Three Measurements for Monochrome and Colour Television Transmission
First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 3: Simulated Systems Section Four Measurements for F.D.M. Transmission First Edition
Methods of Measurement for Equipment Used in Terrestrial Radio-
60487-3-6
60488
60489-1
60489-2
60489-3
60489-4
60489-5
60489-6
60491
60493-1
60489-8
60494
60495
60496
60498
60500
60502-1
60502-2
Relay Systems Part 3: Simulated Systems Section Five Measurement of Mutual Interference First Edition
Methods of Measurement for Equipment Used in Terrestrial RadioRelay Systems Part 3: Simulated Systems Section Six Measurements for Sound-Programme Transmission First Edition
Dimensions of Copper Conductors in Local Cables First Edition
Methods of Measurement for Radio Equipment Used in the Mobile
Services - Part 1: General Definitions and Standard Conditions of
Measurement Second Edition; Amendment 1: 06-1996;
Amendmenmt 2: 05-1999
Methods of Measurement for Radio Equipment Used in the Mobile
Services - Part 2: Transmitters Employing A3E, F3E or G3E
Emissions Second Edition; Amendment 1: 07-1999
Methods of Measurement for Radio Equipment Used in the Mobile
Services - Part 3: Receivers Employing A3E, F3E or G3E Emissions
Second Edition; Amendment 1: 04-1999
Methods of Measurement for Radio Equipment Used in the Mobile
Services Part 4: Transmitters Employing Single-Sideband Emissions
(R3E, H3E or J3E) Second Edition
Methods of Measurement for Radio Equipment Used in the Mobile
Services Part 5: Receivers Employing Single-Sideband Techniques
(R3E, H3E or J3E) Second Edition
Radio Equipment Used in Mobile Services - Methods of
Measurement - Part 6: Data Equipment Third Edition
Safety Requirements for Electronic Flash Apparatus for Photographic
Purposes Second Edition
Guide for the Statistical Analysis of Ageing Test Data Part 1:
Methods Based on Mean Values of Normally Distributed Test
Results First Edition
Methods of Measurement for Radio Equipment Used in the Mobile
Services Part 8: Methods of Measurement for Antennas and Ancillary
Equipment First Edition; Amendment 1:2000
Rules for Pantographs of Electric Rolling Stock First Edition
Single Sideband Power-Line Carrier Terminals Second Edition
Methods for Measuring Performance of Electric Warming Plates for
Household and Similar Purposes First Edition; Amendment 1-1977;
Amendment 2-1992
High-Voltage Coaxial Connectors Used in Nuclear Instrumentation
First Edition
IEC Standard Hydrophone First Edition
Power Cables with Extruded Insulation and Their Accessories for
Rated Voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
- Part 1: Cables for Rated Voltages of 1 kV (Um = 1,2 kV) and 3 kV
(Um = 3,6kV) Edition 1.1; Edition 1: 1997 Consolidated with A
Power Cables with Extruded Insulation and Their Accessories for
Rated Voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
60502-4
60503
60505
60507
60508
60509
60510-1
60510-1-2
60510-1-3
60510-1-4
60510-1-5
60510-2-3
60510-2-5
60510-2-6
60510-2-1
- Part 2: Cables for Rated Voltages from 6 kV (Um = 7,2 kV) and up
to 30 kV (Um = 36 kV) Edition 1.1; Edition 1: 1997 Consolidat
Power Cables with Extruded Insulation and Their Accessories for
Rated Voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 4: Test Requirements on Accessories for Cables with Rated
Voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
Spools for Broadcast Videotape Recorders (VTRS) Second Edition
Evaluation and Qualification of Electrical Insulation Systems Second
Edition
Artificial Pollution Tests on High-Voltage Insulators to Be Used on
A.C. Systems Second Edition
Methods for Measuring the Performance of Electric Ironing Machines
for Household and Similar Purposes First Edition
Sealed Nickel-Cadmium Button Rechargeable Single Cells Second
Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 1: General Sub-Clause 6.2: D.C. Source
Conditions First Edition; Supplement A-1980
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 1: Measurements Common to Sub-Systems and
Combinations of Sub-Systems Section Two: Measurements in the
R.F. Range First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 1: Measurements Common to Sub-Systems and
Combinations of Sub-Systems Section Three - Measurements in the
I.F. Range First Edition; Amendment 1-1988
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 1: Measurements Common to Sub-Systems and
Combinations of Sub-Systems Section Four - Measurements in the
Baseband First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 1: Measurements Common to Sub-Systems and
Combinations of Sub-Systems Section Five - Noise Temperature
Measurements First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 2: Measurements for Sub-Systems Section Three Low-Noise Amplifier First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 2: Measurements for Sub-Systems Section Five:
Frequency Modulators First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 2: Measurements for Sub-Systems Section Six:
Frequency Demodulators First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 2: Measurements for Sub-Systems Section One General Section Two - Antenna (Including Feed Network) First
60510-2-4
60510-2-7
60510-3-1
60510-3-2
60510-3-3
60510-3-4
60512-1
60512-1-3
60512-1-4
60512-1-100
60512-2
60512-3
60512-4
60512-11-8
Edition; Amendment 1-1996
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 2: Measurements for Sub-Systems Section Four Up- and Down-Converters First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 2: Measurements for Sub-Systems Section Seven High Power Amplifier First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 3: Methods of Measurement for Combinations of
Sub-Systems Section One - General First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 3: Methods of Measurement for Combinations of
Sub-Systems Section Two: Measurement of the Figure of Merit (G/T)
of the Receiving System in the 4 GHz to 6 GHz Range First Editi
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 3: Methods of Measurement for Combination of
Sub-Systems Section Three - Measurements for Monochrome and
Colour Television Transmission First Edition
Methods of Measurement for Radio Equipment Used in Satellite
Earth Stations Part 3: Methods of Measurement on Combinations of
Sub-Systems Section Four: Measurements for Frequency Division
Multiplex (f.d.m.) Transmission First Edition
Connectors for Electronic Equipment - Tests and Measurements Part 1: General Fourth Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 1: General
Examination - Section 3: Test 1c - Electrical Engagement Length
First Edition
Electromechanical Components for Electronic Equipment - Basic
Testing Procedures and Measuring Methods - Part 1: General Section 4: Test 1d - Contact Protection Effectiveness (Scoop-Proof)
Corrigendum: 11 2000
Connectors for Electronic Equipment - Tests and Measurements Part 1-100: General - Applicable Publications First Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 2: General
Examination, Electrical Continuity and Contact Resistance Tests,
Insulation Tests and Voltage Stress Tests Second Edition;
Amendment 1-199
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 3: Current-Carrying
Capacity Tests First Edition
Electromechanical Components for Electronic Equipment; Basic
Testing Procedures and Measuring Methods Part 4: Dynamic Stress
Tests First Edition
Electromechanical Components for Electronic Equipment - Basic
60512-12-7
60512-25-1
60684-3-209
60297-2
60297-3
60299
60300-1
60684-3-211
60684-3-212
60684-3-213
60684-3-214
60684-3-216
60684-3-217
60684-3-218
60684-3-228
Testing Procedures and Measuring Methods - Part 11: Climatic Tests
- Section 8: Test 11h - Sand and Dust First Edition
Connectors for Electronic Equipment - Tests and Measurements Part 12-7: Soldering Tests - Test 12g: Solderability, Wetting Balance
Method First Edition
Connectors for Electronic Equipment - Tests and Measurements Part 25-1: Test 25a - Crosstalk Ratio First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheet 209: Heat
Shrinkable Sleeving, General Purpose, Flame Retarded Polyolefin
Shrink Ratio 2:1 First Edition
Dimensions of Mechanical Structures of the 482.6 mm (19 Inch)
Series Part 2: Cabinets and Pitches of Rack Structures First Edition
Dimensions of Mechanical Structures of the 482,6 mm (19 in) Series
Part 3: Subracks and Associated Plug-In Units First Edition;
Amendment 1-1992
Household Electric Blankets - Methods for Measuring Performance
Second Edition
Dependability Management - Part 1: Dependability Programme
Management First Edition; Replaces IEC 300: 1984
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheet 211: HeatShrinkable Sleeving, General Purpose, Semi-Rigid Polyolefin, Shrink
Ratio 2:1 First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 212: Heat-Shrinkable Polyolefin Sleeving,
Flame Retarded, Shrink Ratio 2:1 First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 213: Heat-Shrinkable Polyolefin Sleeving,
Not Flame Retarded, Shrink Ratio 2:1 First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 214: Heat-Shrinkable, Polyolefin Sleeving,
Not Flame Retarded, Shrink Ratio 3:1 - Thick and Medium Wall First
Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 216: Heat-Shrinkable, Flame-Retarded,
Limited-Fire-Hazard Sleeving First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 217: Heat-Shrinkable Polyolefin Sleeving,
Flame Retarded, Shrink Ratio 3:1 First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 218: Heat-Shrinkable Polyolefin Sleeving,
Not Flame Retarded, Shrink Ratio 3:1 First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 228: Heat-Shrinkable Semi-Rigid,
Polyvinylidene Fluoride Sleeving, Flame Retarded, Fluid Resistant,
60684-3-233
60684-3-240 TO
243
60684-3-246
60684-3-271
60297-4
60297-5-100
60300-2
60300-3-1
60300-3-2
60297-5-101
60297-5-102
60297-5-103
60297-5-104
Shrink Ratio 2:1 First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 233: Heat-Shrinkable Fluoroelastomer
Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 First
Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 240 to 243:
Heat-Shrinkable PTFE Sleeving First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 246: Heat-Shrinkable Polyolefin Sleeving,
Dual-Wall, Not Flame-Retarded Second Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 271: Heat-Shrinkable Elastomer Sleeving,
Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 First Edition
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 4:
Subracks and Associated Plug-In Units - Additional Dimensions
Edition 1.1 08/1999; Edition 1:1995 Consolidated with Amendment
1:19
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-100:
Subracks and Associated Plug-In Units - Design Overview First
Edition
Dependability Management - Part 2: Dependability Programme
Elements and Tasks First Edition
Dependability Management Part 3: Application Guide Section 1:
Analysis Techniques for Dependability: Guide on Methodology First
Edition
Dependability Management - Part 3: Application Guide - Section 2:
Collection of Dependability Data from the Field First Edition;
Replaces IEC 60362: 1971
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-101:
Subracks and Associated Plug-In Units - Injector/Extractor Handle
First Edition
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-102:
Subracks and Associated Plug-In Units - Electromagnetic Shielding
Provision First Edition
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-103:
Subracks and Associated Plug-In Units - Electrostatic Discharge
Protection First Edition
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-104:
Subracks and Associated Plug-In Units - Keying First Edition
60297-5-105
60297-5-107
60298
60300-3-3
60300-3-4
60300-3-5
60300-3-6
60300-3-7
60300-3-9
60300-3-10
60300-3-11
60301
60302
60304
60306-1
60306-2
60306-3
60306-4
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-105:
Subracks and Associated Plug-In Units - Alignment and/or Earth Pin
First Edition
Mechanical Structures for Electronic Equipment - Dimensions of
Mechanical Structures of the 482,6 mm (19 in) Series - Part 5-107:
Subracks and Associated Plug-In Units - Rear-Mounted Plug-In Units
First Edition
A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages
Above 1 kV and up to and Including 52 kV Third Edition;
Amendment 1-1994; Corrigendum-1995; Corrigendum-1998
Dependability Management - Part 3: Application Guide - Section 3:
Life Cycle Costing First Edition
Dependability Management - Part 3: Application Guide - Section 4:
Guide to the Specification of Dependability Requirements First
Edition
Dependability Management - Part 3-5: Application Guide Reliability Test Conditions and Statistical Test Principles First
Edition
Dependability Management - Part 3: Application Guide - Section 6:
Software Aspects of Dependability First Edition
Dependability Management - Part 3-7: Application Guide Reliability Stress Screening of Electronic Hardware First Edition
Dependability Management - Part 3: Application Guide - Section 9:
Risk Analysis of Technological Systems First Edition; Replaces CSA
Q634-91-CAN/CSA
Dependability Management - Part 3-10: Application Guide Maintainability First Edition
Dependability Management - Part 3-11: Application Guide Reliability Centred Maintenance First Edition
Preferred Diameters of Wire Terminations of Capacitors and
Resistors Second Edition; Amendment 1-1972
Standard Definitions and Methods of Measurement for Piezoelectric
Vibrators Operating over the Frequency Range up to 30 MHz First
Edition; Errata-02/1971
Standard Colours for Insulation for Low-Frequency Cables and Wires
Third Edition
Measurement of Photosensitive Devices Part 1: Basic
Recommendations First Edition
Measurement of Photosensitive Devices Part 2: Methods of
Measurement of Phototubes First Edition
Measurement of Photosensitive Devices Part 3: Methods of
Measurement of Photoconductive Cells for Use in the Visible
Spectrum First Edition
Measurement of Photosensitive Devices Part 4: Methods of
Measurement for Photomultipliers First Edition
60305
60308
60309-1
60309-2
60310
60311
60312
60313
60314
60315-1
60315-3
60315-4
60315-6
60315-9
60317-0-1
60317-0-2
60317-0-3
Insulators for Overhead Lines with a Nominal Voltage Above 1 000
V - Ceramic or Glass Insulator Units for A.C. Systems Characteristics of Insulator Units of the Cap and Pin Type Fourth
Edition
International Code for Testing of Speed Governing Systems for
Hydraulic Turbines First Edition
Plugs, Socket-Outlets and Couplers for Industrial Purposes - Part 1:
General Requirements Fourth Edition
Plugs, Socket-Outlets and Couplers for Industrial Purposes - Part 2:
Dimensional Interchangeability Requirements for Pin and ContactTube Accessories Fourth Edition
Traction Transformers and Inductors Second Edition
Electric Irons for Household or Similar Use - Methods for Measuring
Performance Edition 3.2; Edition 3:1995 Consolidated with
Amendment 1:1997 and Amendment 2:1999
Vacuum Cleaners for Household Use - Methods of Measuring the
Performance Edition 3:1998 Consolidated with Amendment 1:2000
Coaxial Cable Connectors Used in Nuclear Instrumentation Second
Edition
Temperature Control Devices for Quartz Crystal Units First Edition;
Supplement A-1971; Amendment 1-1979
Methods of Measurement on Radio Receivers for Various Classes of
Emission; Part 1: General Considerations and Methods of
Measurement, Including Audio-Frequency Measurements Second
Edition; Corrigendum-1997
Methods of Measurement on Radio Receivers for Various Classes of
Emission - Part 3: Receivers for Amplitude-Modulated SoundBroadcasting Emissions Edition 2.1: Edition 2: 1989 Consolidated
with Amendment 1: 1999
Methods of Measurement on Radio Receivers for Various Classes of
Emission - Part 4: Receivers for Frequency-Modulated Sound
Broadcasting Emissions Second Edition
Methods of Measurement on Radio Receivers for Various Classes of
Emission Part 6: General Purpose Communication Receivers First
Edition; Corrigendum-02/1997
Methods of Measurement on Radio Receivers for Various Classes of
Emission - Part 9: Measurement of the Characteristics Relevant to
Radio Data System (RDS) Reception First Edition
Specifications for Particular Types of Winding Wires - Part 0-1:
General Requirements - Enamelled Round Copper Wire Edition 2.1;
Edition 2:1997 Consolidated with Amendment 1: 1999
Specifications for Particular Types of Winding Wires - Part 0-2:
General Requirements - Enamelled Rectangular Copper Wire Edition
2.1; Edition 2: 1997 Consolidated with Amendment 1: 1999
Specifications for Particular Types of Winding Wires - Part 0-3:
General Requirements - Enamelled Round Aluminium Wire Edition
60317-0-4
60317-3
60317-17
60317-18
60317-0-5
60317-0-6
60317-1
60317-2
60317-4
60317-7
60317-8
60317-10
60317-19
2.1; Edition 2:1997 Consolidated with Amendment 1:1999
Specifications for Particular Types of Winding Wires - Part 0-4:
General Requirements - Glass-Fibre Wound Resin or Varnish
Impregnated, Bare or Enamelled Rectangular Copper Wire Edition
2.1; Edition 2:1997 Consolidated with Amendment 1:1999
Specifications for Particular Types of Winding Wires Part 3:
Polyester Enamelled Round Copper Wire, Class 155 Second Edition;
Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 17:
Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 105
Second Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 18:
Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 120
Second Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires - Part 0-5:
General Requirements - Glass-Fibre Braided Resin or Varnish
Impregnated, Bare or Enamelled Rectangular Copper Wire Edition
1.2; Edition 1:1992 Consolidated with Amendments 1:1997 and
2:1999
Specifications for Particular Types of Winding Wires - Part 0-6:
General Requirements - Glass-Fibre Wound Resin or Varnish
Impregnated, Bare or Enamelled Round Copper Wire First Edition
Specifications for Particular Types of Winding Wires - Part 1:
Polyvinyl Acetal Enamelled Round Copper Wire, Class 105 Edition
3.2; Edition 3: 1990 Consolidated with Amendment 1: 1997 and 2:
1997
Specifications for Particular Types of Winding Wires - Part 2:
Solderable Polyurethane Enamelled Round Copper Wire, Class 130,
with a Bonding Layer Edition 3.2; Edition 3: 1990 Consolidated with
Amendments 1; 1997 and 2: 1999
Specifications for Particular Types of Winding Wires - Part 4:
Solderable Polyurethane Enamelled Round Copper Wire, Class 130
Edition 3.2; Edition 3: 1990 Consolidated with Amendments 1: 1997
and 2: 1999
Specifications for Particular Types of Winding Wires - Part 7:
Polyimide Enamelled Round Copper Wire, Class 220 Edition 3.2;
Edition 3: 1990 Consolidated with Amendments 1: 1997 and 2: 1997
Specifications for Particular Types of Winding Wires - Part 8:
Polyesterimide Enamelled Round Copper Wire, Class 180 Edition
3.2; Edition 3: 1990 Consolidated with Amendments 1: 1997 and 2:
1997
Specifications for Particular Types of Winding Wires Part 10:
Enamelled Round Copper Wires with a Temperature Index of 180 for
Use in Refrigerant Systems First Edition; Supplement A-1978;
Amendment 1-1997
Specifications for Particular Types of Winding Wires - Part 19:
60317-20
60317-21
60317-22
60317-23
60317-24
60317-26
60317-27
60317-28
60317-25
60317-29
60317-30
60317-31
Solderable Polyurethane Enamelled Round Copper Wire Overcoated
with Polyamide, Class 130 Edition 2.2; Edition 2: 1990 Consolidated
with Amedments 1: 1997 and 2: 1999
Specifications for Particular Types of Winding Wires - Part 20:
Solderable Polyurethane Enamelled Round Copper Wire, Class 155
Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1997
and 2: 1999
Specifications for Particular Types of Winding Wires - Part 21:
Solderable Polyurethane Enamelled Round Copper Wire Overcoated
with Polyamide, Class 155 Edition 2.2; Edition 2 Consolidated with
Amendments 1:1997 and 2:1999
Specifications for Particular Types of Winding Wires Part 22:
Polyester or Polyesterimide Enamelled Round Copper Wire
Overcoated with Polyamide, Class 180 Second Edition; Amendment
1-1997
Specifications for Particular Types of Winding Wires - Part 23:
Solderable Polyesterimide Enamelled Round Copper Wire, Class 180
Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1997
and 2: 1999
Specifications for Particular Types of Winding Wires Part 24:
Polyester or Polyesterimide Enamelled Round Aluminium Wire
Overcoated with Polyamide, Class 180 Second Edition; Amendment
1-1997
Specifications for Particular Types of Winding Wires Part 26:
Polyamide-Imide Enamelled Round Copper Wire, Class 200 Second
Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires - Part 27:
Enamelled Tape Covered Rectangular Copper Wire Third Edition;
Amendment 1: 10-1999
Specifications for Particular Types of Winding Wires Part 28:
Polyesterimide Enamelled Rectangular Copper Wire, Class 180 First
Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires - Part 25:
Polyester or Polyesterimide Overcoated with Polyamide-Imide
Enamelled Round Aluminium Wire, Class 200 Edition 2.2; Edition 2:
1990 Consolidated with Amendments 1: 1997 and 2: 1997
Specifications for Particular Types of Winding Wires Part 29:
Polyester or Polyesterimide Overcoated with Polyamide-Imide
Enamelled Rectangular Copper Wire, Class 200 First Edition;
Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 30:
Polyimide Enamelled Rectangular Copper Wire, Class 220 First
Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 31: GlassFibre Wound, Polyester or Polyesterimide Varnish-Treated, Bare or
Enamelled Rectangular Copper Wire, Temperature Index 180 First
60317-32
60317-33
60317-34
60317-35
60317-36
60317-37
60317-38
60317-39
60317-40
60317-41
60317-42
60317-43
Edition; Amendment 1 08 1997
Specifications for Particular Types of Winding Wires Part 32: GlassFibre Wound, Polyester or Polyesterimide Varnish-Treated, Bare or
Enamelled Rectangular Copper Wire, Temperature Index 155 First
Edition; Amendment 1 08 1997
Specifications for Particular Types of Winding Wires - Part 33:
Glass-Fibre Wound Resin or Varnish Impregnated, Bare or
Enamelled Rectangular Copper Wire, Temperature Index 200 Edition
1.1; Edition 1: 1990 Consolidated with Amendment 1: 1997
Specifications for Particular Types of Winding Wires - Part 34:
Polyester Enamelled Round Copper Wire, Class 130 L Second
Edition
Specifications for Particular Types of Winding Wires - Part 35:
Solderable Polyurethane Enamelled Round Copper Wire, Class 155,
with a Bonding Layer Edition 1.2; Edition 1: 1992 Consolidated with
Amendments 1: 1997 and 2: 1999
Specifications for Particular Types of Winding Wires - Part 36:
Solderable Polyesterimide Enamelled Round Copper Wire, Class
180, with a Bonding Layer Edition 1.2; Edition 1: 1992 Consolidated
with Amendments 1: 1997 and 2: 1999
Specifications for Particular Types of Winding Wires - Part 37:
Polyesterimide Enamelled Round Copper Wire, Class 180, with a
Bonding Layer Edition 1.2; Edition 1: 1992 Consolidated with
Amendments 1: 1997 and 2: 1999
Specifications for Particular Types of Winding Wires - Part 38:
Polyester or Polyesterimide Overcoated with Polyamide-Imide
Enamelled Round Copper Wire, Class 200, with a Bonding Layer
Edition 1.2; Edition 1: 1992 Consolidated with Amendments 1: 1997
and 2
Specifications for Particular Types of Winding Wires Part 39: GlassFibre Braided, Polyester or Polyesterimide Varnish-Treated, Bare or
Enamelled Rectangular Copper Wire, Temperature Index 80 First
Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 40: GlassFibre Braided, Silicone Varnish-Treated, Bare or Enamelled
Rectangular Copper Wire, Temperature Index 200 First Edition;
Amendment 1-1997
Specifications for Particular Types of Winding Wires - Part 41:
Solderable Polyester Enamelled Round Copper Wire, Class 130L
First Edition
Specifications for Particular Types of Winding Wires - Part 42:
Polyester-Amide-Imide Enamelled Round Copper Wire, Class 200
First Edition
Specifications for Particular Types of Winding Wires - Part 43:
Aromatic Polyimide Tape Wrapped Round Copper Wire, Class 240
First Edition
60317-44
60317-45
60317-46
60317-47
60317-48
60317-49
60317-50
60317-51
60317-52
60317-53
60317-54
60318-1
60318-2
60318-3
60319
60320-1
60320-2-1
60320-2-2
Specifications for Particular Types of Winding Wires - Part 44:
Aromatic Polyimide Tape Wrapped Rectangular Copper Wire, Class
240 First Edition
Specifications for Particular Types of Winding Wires - Part 45:
Polyester Enamelled Round Copper Wire, Class 130 First Edition
Specifications for Particular Types of Winding Wire - Part 46:
Aromatic Polyimide Enamelled Round Copper Wire, Class 240 First
Edition
Specifications for Particular Types of Winding Wires - Part 47:
Aromatic Polyimide Enamelled Rectangular Copper Wire, Class 240
First Edition
Specifications for Particular Types of Winding Wires - Part 48:
Glass-Fibre Wound Resin or Varnish Impregnated, Bare or
Enamelled Round Copper Wire, Temperature Index 155 First Edition
Specifications for Particular Types of Winding Wires - Part 49:
Glass-Fibre Wound Resin or Varnish Impregnated, Bare or
Enamelled Round Copper Wire, Temperature Index 180 First Edition
Specifications for Particular Types of Winding Wires - Part 50:
Glass-Fibre Wound Resin or Varnish Impregnated, Bare or
Enamelled Round Copper Wire, Temperature Index 200 First Edition
Specifications for Particular Types of Winding Wires - Part 51:
Solderable Polyurethane Enamelled Round Copper Wire, Class 180
First Edition
Specifications for Particular Types of Winding Wires - Part 52:
Aromatic Polyamide (Aramid) Tape Wrapped Round Copper Wire,
Temperature Index 220 First Edition
Specifications for Particular Types of Winding Wires - Part 53:
Aromatic Polyamide (Aramid) Tape Wrapped Rectangular Copper
Wire, Temperature Index 220 First Edition
Specifications for Particular Types of Winding Wires - Part 54:
Polyester Enamelled Round Copper Wire, Class 155L First Edition
Electroacoustics - Simulators of Human Head and Ear - Part 1: Ear
Simulator for the Calibration of Supra-Aural Earphones First Edition
Electroacoustics - Simulators of Human Head and Ear - Part 2: An
Interim Acoustic Coupler for the Calibration of Audiometric
Earphones in the Extended High-Frequency Range First Edition
Electroacoustics - Simulators of Human Head and Ear - Part 3:
Acoustic Coupler for the Calibration of Supra-Aural Earphones Used
in Audiometry First Edition; Cancels and Replaces IEC 60303: 1970
Presentation and Specification of Reliability Data for Electronic
Components Third Edition
Appliance Couplers for Household and Similar General Purposes Part 1: General Requirements Second Edition
Appliance Couplers for Household and Similar General Purposes Part 2-1: Sewing Machine Couplers Second Edition
Appliance Couplers for Household and Similar General Purposes -
60320-2-3
60321
60321-2
60321-3
60322
60325
60326-2
60326-3
60326-4
60326-5
60326-7
60326-8
60326-9
60326-10
60326-11
60326-12
60329
60331-11
60331-21
Part 2-2: Interconnection Couplers for Household and Similar
Equipment Second Edition
Appliance Couplers for Household and Similar General Purposes Part 2-3: Appliance Coupler with a Degree of Protection Higher Than
IPX0 First Edition
Guidance for the Design and Use of Components Intended for
Mounting on Boards with Printed Wiring and Printed Circuits First
Edition; Amendment 1-1975
Auxiliary Printed Board Information Part 2: Rework, Repair,
Modifications First Edition
Auxiliary Printed Board Information Part 3: Guidelines for Artwork
First Edition
Railway Applications - Electric Equipment for Rolling Stock - Rules
for Power Resistors of Open Construction Second Edition
Alpha, Beta and Alpha-Beta Contamination Meters and Monitors
Second Edition
Printed Boards Part 2: Test Methods Third Edition; Amendment 11992
Printed Boards Part 3: Design and Use of Printed Boards Second
Edition; Incorporating Supplement A and Amendment 1
Printed Boards Part 4: Specification for Single and Double Sided
Printed Boards with Plain Holes First Edition; Amendment 1-1989
Printed Boards Part 5: Specification for Single and Double Sided
Printed Boards with Plated-Through Holes First Edition; Amendment
1-1989
Printed Boards Part 7: Specification for Single and Double Sided
Flexible Printed Boards without Through Connections First Edition;
Amendment 1-1989
Printed Boards Part 8: Specification for Single and Double Sided
Flexible Printed Boards with Through Connections First Edition;
Amendment 1-1989
Printed Boards Part 9: Specification for Flexible Multilayer Printed
Boards with Through Connections First Edition
Printed Boards Part 10: Specification for Flex-Rigid Double-Sided
Printed Boards with Through Connections First Edition
Printed Boards Part 11: Specification for Flex-Rigid Multilayer
Printed Boards with Through Connections First Edition
Printed Boards Part 12: Specification for Mass Lamination Panels
(Semi-Manufactured Multilayer Printed Boards) First Edition
Strip-Wound Cut Cores of Grain Oriented Silicon-Iron Alloy, Used
for Electronic and Telecommunication Equipment Second Edition
Tests for Electric Cables under Fire Conditions - Circuit Integrity Part 11: Apparatus - Fire Alone at a Flame Temperature of at Least
750 Degrees Celsius First Edition
Tests for Electric Cables under Fire Conditions - Circuit Integrity Part 21: Procedures and Requirements - Cables of Rated Voltage up
60331-23
60331-25
60332-1
60332-2
60332-3-10
60332-3-21
60333
60335-1
60335-2-3
60335-2-7
60332-3-22
60332-3-23
60332-3-24
60332-3-25
60335-2-2
60335-2-4
to and Including 0,6/1,0 kV First Edition
Tests for Electric Cables under Fire Conditions - Circuit Integrity Part 23: Procedures and Requirements - Electric Data Cables First
Edition
Tests for Electric Cables under Fire Conditions - Circuit Integrity Part 25: Procedures and Requirements - Optical Fibre Cables First
Edition
Tests on Electric Cables Under Fire Conditions Part 1: Test on a
Single Vertical Insulated Wire or Cable Third Edition; Corrigendum05/1993
Tests on Electric Cables Under Fire Conditions Part 2: Test on a
Single Small Vertical Insulated Copper Wire or Cable First Edition
Tests on Electric Cables Under Fire Conditions - Part 3-10: Test for
Vertical Flame Spread of Vertically-Mounted Bunched Wires or
Cables - Apparatus First Edition; Supersedes IEC 60332-3:1992
Tests on Electric Cables Under Fire Conditions - Part 3-21: Test for
Vertical Flame Spread of Vertically-Mounted Bunched Wires or
Cables - Category A F/R First Edition
Nuclear Instrumentation - Semiconductor Charged-Particle Detectors
- Test Procedures Third Edition
Household and Similar Electrical Appliances - Safety - Part 1:
General Requirements Fourth Edition: 2001
Safety of Household and Similar Electrical Appliances - Part 2-3:
Particular Requirements for Electric Irons Edition 4.1; Consolidated
with Amendment 1: 1999
Safety of Household and Similar Electrical Appliances - Part 2-7:
Particular Requirements for Washing Machines Fifth Edition
Tests on Electric Cables Under Fire Conditions - Part 3-22: Test for
Vertical Flame Spread of Vertically-Mounted Bunched Wires or
Cables - Category A First Edition
Tests on Electric Cables Under Fire Conditions - Part 3-23: Test for
Vertical Flame Spread of Vertically-Mounted Bunched Wires or
Cables - Category B First Edition
Tests on Electric Cables Under Fire Conditions - Part 3-24: Test for
Vertical Flame Spread of Vertically-Mounted Bunched Wires or
Cables - Category C First Edition
Tests on Electric Cables Under Fire Conditions - Part 3-25: Test for
Vertical Flame Spread of Vertically - Mounted Bunched Wires or
Cables - Category D First Edition
Safety of Household and Similar Electrical Appliances - Part 2-2:
Particular Requirements for Vacuum Cleaners and Water Suction
Cleaning Appliances Edition 4.1; Consolidated with Amendment
1:1998; Amendment 2:11 1999
Safety of Household and Similar Electrical Appliances - Part 2-4:
Particular Requirements for Spin Extractors Edition 4.2; Edition 4:
1993 Consolidated with Amendments 1: 1997 and 2: 1999
60335-2-5
60335-2-6
60335-2-8
60335-2-9
60335-2-10
60335-2-11
60335-2-12
60335-2-13
60335-2-14
60335-2-16
60335-2-26
60335-2-28
60335-2-29
60335-2-15
60335-2-17
Safety of Household and Similar Electrical Appliances - Part 2-5:
Particular Requirements for Dishwashers Edition4.1 Edition 4: 1992
Consolidated with Amendment 1: 1999
Safety of Household and Similar Electrical Appliances - Part 2-6:
Particular Requirements for Stationary Cooking Ranges, Hobs, Ovens
and Similar Appliances Fourth Edition; Corrigendum-1998;
Amendment 1: 02-2000
Safety of Household and Similar Electrical Appliances Part 2-8:
Particular Requirements for Shavers, Hair Clippers and Similar
Appliances Fourth Edition; Amendment 1-2000
Safety of Household and Similar Electrical Appliances - Part 2-9:
Particular Requirements for Grills, Toasters and Similar Portable
Cooking Appliances Edition 4.1; Consolidated with Amendment
1:1998, Amendment 2:11 1999
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Floor Treatment Machines and Wet
Scrubbing Machines Fourth Edition
Safety of Household and Similar Electrical Appliances - Part 2-11:
Particular Requirements for Tumble Dryers Fifth Edition;
Amendment 1-2000
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Warming Plates and Similar Appliances
Fourth Edition
Safety of Household and Similar Electrical Appliances - Part 2-13:
Particular Requirements for Deep Fat Fryers, Frying Pans and Similar
Appliances Edition 4.2; Edition 4: 1993 Consolidated with
Amendments 1: 1993 and 2: 1999
Safety of Household and Similar Electrical Appliances - Part 2-14:
Particular Requirements for Kitchen Machines Third Edition;
Amendment 1:10-1998; Amendment 1:02-1999; Amendment 2:111999
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Food Waste Disposers Fourth Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Clocks Third Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Sewing Machines Third Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Battery Chargers Third Edition
Safety of Household and Similar Electrical Appliances - Part 2-15:
Particular Requirements for Appliances for Heating Liquids Edition
4.1; Edition 4: 1995 Consolidated with Amendment 1: 1999;
Amendment 2: 7/2000
Safety of Household and Similar Electrical Appliances - Part 2-17:
Particular Requirements for Blankets, Pads and Similar Flexible
Heating Appliances First Edition; Cancels and Replaces IEC 60967:
60335-2-21
60335-2-23
60335-2-24
60335-2-25
60335-2-27
60335-2-30
60335-2-31
60335-2-32
60335-2-34
60335-2-35
60335-2-36
60335-2-37
60335-2-38
60335-2-39
60335-2-43
1988
Safety of Household and Similar Electrical Appliances - Part 2-21:
Particular Requirements for Storage Water Heaters Fourth Edition;
Corrigendum-1998; Amendment 1:11-1999
Safety of Household and Similar Electrical Appliances - Part 2-23:
Particular Requirements for Appliances for Skin or Hair Care Fourth
Edition; Corrigendum- 1998; Amendment 1: 02-2000
Safety of Household and Similar Electrical Appliances - Part 2-24:
Particular Requirements for Refrigerating Appliances, Ice-Cream
Appliances and Ice-Makers Fifth Edition; Corrigendum 1: March
2001
Safety of Household and Similar Electrical Appliances Part - 2-25:
Particular Requirements for Microwave Ovens Edition 4.1;
Edition:1996 Consolidated with Amendment 1:1999
Safety of Household and Similar Electrical Appliances - Part 2-27:
Particular Requirements for Appliances for Skin Exposure to
Ultraviolet and Infrared Radiation Third Edition; Amendment 1: 022000
Safety of Household and Similar Electrical Appliances - Part 2-30:
Particular Requirements for Room Heaters Third Edition;
Admendment 1:11-1999
Safety of Household and Similar Electrical Appliances - Part 2-31:
Particular Requirements for Range Hoods Edition 3.1; Edition 3:
1995 Consolidated with Amendment 1: 1998
Safety of Household and Similar Electrical Appliances; Part 2-32:
Particular Requirements for Massage Appliances Third Edition;
Amendment 1:11-1999
Safety of Household and Similar Electrical Appliances - Part 2-34:
Particular Requirements for Motor-Compressors Third Edition
Safety of Household and Similar Electrical Appliances - Part 2-35:
Particular Requirements for Instantaneous Water Heaters Third
Edition; Amendment 1:11-1999
Safety of Household and Similar Electrical Appliances Part 2-36:
Particular Requirements for Commercial Electric Cooking Ranges,
Ovens, Hobs and Hob Elements Fourth Edition
Safety of Household and Similar Electrical Appliances - Part 2-37:
Particular Requirements for Commercial Electric Deep Fat Fryers
Fourth Edition
Safety of Household and Similar Electrical Appliances - Part 2-38:
Particular Requirements for Commercial Electric Griddles and
Griddle Grills Fourth Edition
Safety of Household and Similar Electrical Appliances - Part 2-39:
Particular Requirements for Commercial Electric Multi-Purpose
Cooking Pans Fourth Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Clothes Dryers and Towel Rails Second
60335-2-44
60335-2-45
60335-2-40
60335-2-41
60335-2-42
60335-2-47
60335-2-48
60335-2-49
60335-2-50
60335-2-51
60335-2-52
60335-2-53
60335-2-54
60335-2-55
60335-2-56
60335-2-58
Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Ironers Second Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Portable Heating Tools and Similar
Appliances Second Edition
Safety of Household and Similar Electrical Appliances - Part 2-40:
Particular Requirements for Electrical Heat Pumps, Air-Conditioners
and Dehumidifiers Third Edition; Amendment 1: 02-2000
Safety of Household and Similar Electrical Appliances - Part 2-41:
Particular Requirements for Pumps for Liquids Having a Temperature
Not Exceeding 35 Degrees Celsius Second Edition; Amendment 1:
02-2000
Safety of Household and Similar Electrical Appliances - Part 2-42:
Particular Requirements for Commercial Electric Forced Convection
Ovens, Steam Cookers and Steam-Convection Ovens Fourth Edition
Safety of Household and Similar Electrical Appliances - Part 2-47:
Particular Requirements for Commercial Electric Boiling Pans Third
Edition
Safety of Household and Similar Electrical Appliances - Part 2-48:
Particular Requirements for Commercial Electric Grillers and
Toasters
Safety of Household and Similar Electrical Appliances - Part 2-49:
Particular Requirements for Commercial Electric Hot Cupboards
Third Edition
Safety of Household and Similar Electrical Appliances - Part 2-50:
Particular Requirements for Commercial Electric Bains-Marie Third
Edition
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Stationary Circulation Pumps for Heating
and Service Water Installations Second Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Oral Hygiene Appliances Second Edition
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Sauna Heating Appliances Second
Edition
Safety of Household and Similar Electrical Appliances - Part 2-54:
Particular Requirements for Surface-Cleaning Appliances Employing
Liquids Second Edition; Amendment 1: 05-1999
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Electrical Appliances for Use with
Aquariums and Garden Ponds Second Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Projectors and Similar Appliances
Second Edition; BS EN 60335-2-56: 1997
Safety of Household and Similar Electrical Appliances Part 2-58:
60335-2-59
60335-2-60
60335-2-61
60335-2-64
60335-2-65
60335-2-66
60335-2-62
60335-2-67
60335-2-68
60335-2-69
60335-2-70
60335-2-71
60335-2-72
60335-2-73
Particular Requirements for Commercial Electric Dishwashing
Machines Second Edition; Amendment 1: 11/1998
Safety of Household and Similar Electrical Appliances - Part 2-59:
Particular Requirements for Insect Killers Second Edition;
Amendment 1-2000
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Whirlpool Baths Second Edition
Safety of Household and Similar Electrical Appliances - Part 2-61:
Particular Requirements for Thermal Storage Room Heaters First
Edition; Amendment 1: 02-2000
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Commercial Electric Kitchen Machines
Second Edition; Amendment 1 02/2000
Safety of Household and Similar Electrical Appliances Part 2-65:
Particular Requirements for Air-Cleaning Appliances First Edition;
Amendment 1-2000
Safety of Household and Similar Electrical Appliances - Part 2-66:
Particular Requirements for Water-Bed Heaters First Edition;
Amendment 1-2000
Safety of Household and Similar Electrical Appliances - Part 2-62:
Particular Requirements for Commercial Electric Rinsing Sinks
Second Edition; Amendment 1: 11/1998; Amendment 2 02/2000
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Floor Treatment and Floor Cleaning
Machines, for Industrial and Commercial Use Second Edition;
Amendment 1; 07-2000
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Spray Extraction Appliances, for
Industrial and Commercial Use Second Edition; Amendment 1, 072000
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Wet and Dry Vacuum Cleaners,
Including Power Brush, for Industrial and Commercial Use Second
Edition; Amendment 1, 07-2000
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Milking Machines First Edition
Safety of Household and Similar Electrical Appliances - Part 2-71:
Particular Requirements for Electrical Heating Appliances for
Breeding and Rearing Animals Edition 1.2; Edition 1: 1993
Consolidated with Amendments 1: 1996 and 2:1999
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Automatic Machines for Floor Treatment
for Commercial and Industrial Use First Edition; Amendment 1; 072000
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Fixed Immersion Heaters First Edition
60335-2-74
60335-2-75
60335-2-76
60335-2-77
60335-2-78
60335-2-79
60335-2-80
60335-2-81
60335-2-82
60335-2-84
60335-2-85
60335-2-86
60335-2-87
60335-2-88
60335-2-90
60335-2-91
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Portable Immersion Heaters First Edition
Safety of Household and Similar Electrical Appliances - Part 2-75:
Particular Requirements for Commercial Dispensing Appliances and
Vending Machines First Edition; Amendment 1: 11/1998
Safety of Household and Similar Electrical Appliances - Part 2-76:
Particular Requirements for Electric Fence Energizers Edition 1.1;
Edition 1: 1997 Consolidated with Amendment 1: 1999
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Pedestrian Controlled Mains-Operated
Lawnmowers First Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Outdoor Barbecues First Edition
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for High Pressure Cleaners and Steam
Cleaners, for Industrial and Commercial Use First Edition;
Ammendment 1; 07-2000
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Fans First Edition; Replaces IEC 603421 and 60342-3
Safety of Household and Similar Electrical Appliances Part 2:
Particular Requirements for Foot Warmers and Heating Mats First
Edition; Corrigendum-1998
Safety of Household and Similar Electrical Appliances - Part 2-82:
Particular Requirements for Service Machines and Amusement
Machines First Edition
Safety of Household and Similar Electrical Appliances - Part 2-84:
Particular Requirements for Toilets First Edition; Corrigendum: 041999
Safety of Household and Similar Electrical Appliances - Part 2-85:
Particular Requirements for Fabric Steamers First Edition;
Amendment 1: 02-2000
Safety of Household and Similar Electrical Appliances - Part 2-86:
Particular Requirements for Electric Fishing Machines First Edition
Safety of Household and Similar Electrical Appliances - Part 2-87:
Particular Requirements for Electric Animal-Stunning Equipment
First Edition
Safety of Household and Similar Electrical Appliances; Part 2:
Particular Requirements for Humidifiers Intended for Use with
Heating, Ventilation, or Air-Conditioning Systems First Edition
Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements for Commercial Microwave Ovens First
Edition
Safety of Household and Similar Electrical Appliances - Part 2-91:
Particular Requirements for Walk-Behind and Hand-Held Lawn
Trimmers and Lawn Edge Trimmers First Edition; Corrigendum 1-
60335-2-92
60335-2-94
60335-2-95
60335-2-97
60335-2-98
60336
60338
60339-1
60339-2
60343
60344
60345
60347
60349-1
60352-5
60352-6
60353
60354
60355
2000
Safety of Household and Similar Appliances - Part 2-92: Particular
Requirements for Pedestrian-Controlled Mains-Operated Lawn
Scarifiers and Aerators First Edition
Safety of Household and Similar Electrical Appliances - Part 2-94:
Particular Requirements for Scissors Type Grass Shears First Edition
Safety of Household and Similar Electrical Appliances - Part 2-95:
Particular Requirements for Drives for Vertically Moving Garage
Doors for Residential Use First Edition
Safety of Household and Similar Electrical Appliances - Part 2-97:
Particular Requirements for Drives for Rolling Shutters, Awnings,
Blinds and Similar Equipment First Edition
Safety of Household and Similar Electrical Appliances - Part 2-98:
Particular Requirements for Humidifiers First Edition; Amendment
1:11-1999
X-Ray Tube Assemblies for Medical Diagnosis - Characteristics of
Focal Spots Third Edition
Telemetering for Consumption and Demand First Edition
General Purpose Rigid Coaxial Transmission Lines and Their
Associated Flange Connectors Part 1: General Requirements and
Measuring Methods First Edition
General Purpose Rigid Coaxial Transmission Lines and Their
Associated Flange Connectors Part 2: Detail Specifications Second
Edition
Recommended Test Methods for Determining the Relative Resistance
of Insulating Materials to Breakdown by Surface Discharges Second
Edition; CENELEC EN 60343: 1992
Guide to the Calculation of Resistance of Plain and Coated Copper
Conductors of Low-Frequency Cables and Wires Second Edition;
Amendment 1-1985
Method of Test for Electrical Resistance and Resistivity of Insulating
Materials at Elevated Temperatures First Edition
Transverse Track Video Recorders Second Edition
Electric Traction - Rotating Electrical Machines for Rail and Road
Vehicles - Part 1: Machines Other Than Electronic Convertor-Fed
Alternating Current Motors First Edition
Solderless Connections - Part 5: Press-In Connections - General
Requirements, Test Methods and Practical Guidance Second Edition
Solderless Connections - Part 6: Insulation Piercing Connections General Requirements, Test Methods and Practical Guidance First
Edition
Line Traps for A.C. Power Systems Second Edition
Loading Guide for Oil-Immersed Power Transformers Second
Edition; Corrigendum-03/1992
Appraisal of the Problems of Accelerated Testing for Atmospheric
Corrosion First Edition
60349-2
60352-4
60356
60357
60358
60359
60360
60364-1
60364-4-41
60364-4-42
60364-4-43
60364-4-44
60364-5-51
60364-5-52
60364-5-53
Electric Traction - Rotating Electrical Machines for Rail and Road
Vehicles - Part 2: Electronic Convertor-Fed Alternating Current
Motors First Edition; CENELEC EN 60349-2: 1994
Solderless Connections - Part 4: Solderless Non-Accessible
Insulation Displacement Connections - General Requirements, Test
Methods and Practical Guidance First Edition; Amendment 1: 07
2000
Dimensions for Commutators and Slip-Rings First Edition
Tungsten Halogen Lamps (Non-Vehicle) Edition 2.13; Edition
2:1982 Consolidated with Amendments 1(1984), 2(1985), 3(1987),
4(1989), 5(1992), 6(1993), 7(1994), 8(1995), 9(1996), 10(1996),
11(1997), 12(1999), and 13(2000)
Coupling Capacitors and Capacitor Dividers Second Edition
Expression of the Performance of Electrical and Electronic
Measuring Equipment Second Edition; Amendment 1-1991
Standard Method of Measurement of Lamp Cap Temperature Rise
Third Edition; Corrigendum: 03-1999
Electrical Installations of Buildings - Part 1: Fundamental Principles,
Assessment of General Characteristics, Definitions Fourth Edition;
Compiled from and Replaces IEC 60364-2-21(1993) and IEC 603643(1993) and Its Amendments 1 and 2 (1994 and 1995, Resp
Electrical Installations of Buildings - Part 4-41: Protection for Safety
- Protection Against Electric Shock Fourth Edition; Compiled from
and Replaces IEC 60364-4-46 (1981), IEC 60364-4-47 (1981) and Its
Amendment 1 (1993) and IEC 60364-4-481 (1993)
Electrical Installations of Buildings - Part 4-42: Protection of Safety Protection Against Thermal Effects Second Edition; Compiled from
and Replaces IEC 60364-4-482 (1982)
Electrical Installations of Buildings - Part 4-43: Protection for Safety
- Protection Against Overcurrent Second Edition; Compiled from and
Replaces IEC 60364-4-473 (1977) and Its Amendment 1 (1998)
Electrical Installations of Buildings - Part 4-44: Protection for Safety
- Protection Against Voltage Disturbances and Electromagnetic
Disturbances First Edition; Compiled from and Replaces IEC 603644-442 (1993) Its Amendment 1 (1995) and Its Amendment 2(
Electrical Installations of Buildings - Part 5-51: Selection and
Erection of Electrical Equipment - Common Rules Fourth Edition;
Compiled from and Replaces IEC 60364-3 (1993), Its Amendment 1
(1994) and Amendment 2 (1995)
Electrical Installations of Buildings - Part 5-52: Selection and
Erection of Electrical Equipment - Wiring Systems Second Edition;
Compiled from and Replaces IEC 60364-5-523(1999)
Electrical Installations of Buildings - Part 5-53: Selection and
Erection of Electrical Equipment - Isolation, Switching and Control
Third Edition; Replaces IEC 60364-5-534(1981), IEC 60364-5537(1981) and Its Amendment 1(1989) and IEC 60364-4-46(1981)
60364-6-61
60364-7-703
60364-7-706
60364-5-54
60364-5-55
60364-5-548
60364-7-701
60364-7-702
60364-7-704
60364-7-705
60364-7-707
60364-7-708
60364-7-709
60364-7-711
Electrical Installations of Buildings - Part 6: Verification - Initial
Verification Second Edition
Electrical Installations of Buildings Part 7: Requirements for Special
Installations or Locations Section 703 - Locations Containing Sauna
Heaters First Edition
Electrical Installations of Buildings Part 7: Requirements for Special
Installations or Locations Section 706 - Restrictive Conducting
Locations First Edition
Electrical Installations of Buildings Part 5: Selection and Erection of
Electrical Equipment Chapter 54: Earthing Arrangements and
Protective Conductors First Edition; Amendment 1-1982
Electrical Installations of Buildings - Part 5-55: Selection and
Erection of Electrical Equipment - Other Equipment First Edition;
Amendment 1:12-2001; Compiled and Replaces IEC 60364-5551(1994), IEC 60364-5-559(1999), IEC 60364-5-56(1980) and Its
Amendme
Electrical Installations of Buildings - Part 5: Selection and Erection of
Electrical Equipment - Section 548: Earthing Arrangements and
Equipotential Bonding for Information Technology Installations
Edition 1.1; Edition 1: 1996 Consolidated with Amendment
Electrical Installations of Buildings Part 7: Requirements for Special
Installations or Locations Section 701: Locations Containing a Bath
Tub or Shower Basin First Edition
Electrical Installations of Buildings - Part 7: Requirements for
Special Installations or Locations - Section 702: Swimming Pools and
Other Basins Second Edition
Electrical Installations of Buildings - Part 7: Requirements for
Special Installations or Locations - Section 704 - Construction and
Demolition Site Installations Edition 1.1; Edition 1: 1989
Consolidated with Amendment 1: 1999
Electrical Installations of Buildings Part 7: Requirements for Special
Installations or Locations Section 705 - Electrical Installations of
Agricultural and Horticultural Premises First Edition
Electrical Installations of Buildings Part 7: Requirements for Special
Installations or Locations Section 707 - Earthing Requirements for
the Installation of Data Processing Equipment First Edition
Electrical Installations of Buildings Part 7: Requirements for Special
Installations or Locations - Section 708: Electrical Installations in
Caravan Parks and Caravans First Edition; Amendment 1-1993;
Replaces IEC 60585-1: 1977
Electrical Installations of Buildings - Part 7: Requirements for
Special Installations or Locations - Section 709: Marinas and
Pleasure Craft First Edition
Electrical Installations of Buildings - Part 7-711: Requirements for
Special Installations or Locations - Exhibitions, Shows and Stands
First Edition
60364-7-713
60364-7-714
60364-7-715
60364-7-717
60367-1
60368-1
60368-2-1
60364-7-740
60367-2
60368-2-2
60368-3
60368-4
60368-4-1
60369
60370
60371-1
60151-28
60152
Electrical Installations of Buildings - Part 7: Requirements for
Special Installations and Locations - Section 713: Furniture First
Edition
Electrical Installations of Buildings - Part 7: Requirements for
Special Installations or Locations - Section 714: External Lighting
Installations First Edition
Electrical Installations of Buildings - Part 7-715: Requirements for
Special Installations or Locations - Extra-Low-Voltage Lighting
Installations First Edition
Electrical Installations of Buildings - Part 7-717: Requirements for
Special Installations or Locations - Mobile or Transportable Units
First Edition
Cores for Inductors and Transformers for Telecommunications Part 1:
Measuring Methods Second Edition; Amendment 1-1984;
Amendment 2-1992
Piezoelectric Filters of Assessed Quality - Part 1: Generic
Specification Fourth Edition
Piezoelectric Filters Part 2: Guide to the Use of Piezoelectric Filters
Section One - Quartz Crystal Filters Second Edition
Electrical Installations of Buildings - Part 7-740: Requirements for
Special Installations or Locations - Temporary Electrical Installations
for Structures, Amusement Devices and Booths at Fairgrounds,
Amusement Parks and Circuses First Edition
Cores for Inductors and Transformers for Telecommunications Part 2:
Guides for the Drafting of Performance Specifications First Edition;
Supplement A-1976; Amendment 1-1983; Replaces 60218: 1966 and
60219: 1966
Piezoelectric Filters - Part 2: Guide to the Use of Piezoelectric Filters
- Section 2: Piezoelectric Ceramic Filters First Edition
Piezoelectric Filters os Assessed Quality - Part 3: Standard Outlines
and Lead Connections Third Edition
Piezoelectric Filters of Assessed Quality - Part 4: Sectional
Specification - Capability Approval First Edition ; QC 640100
Piezoelectric Filters of Assessed Quality - Part 4-1: Blank Detail
Specification - Capability Approval First Edition ; QC 640101
Methods for Measuring Performance of Floor Polishers for
Household and Similar Purposes First Edition
Test Procedure for Thermal Endurance of Insulating Varnishes Electric Strength Method First Edition
Specification for Insulating Materials Based on Mica Part 1:
Definitions and General Requirements Second Edition
Measurements of the Electrical Properties of Electronic Tubes Part
28: Methods of Measurement of Colour Television Picture Tubes
First Edition
Identification by Hour Numbers of the Phase Conductors of 3-Phase
Electric Systems First Edition
60153-1
60153-2
60153-3
60153-4
60153-6
60153-7
60154-1
60154-2
60154-3
60154-4
60154-6
60154-7
60155
60156
60167
60169-1
60169-2
60168
60169-1-1
60169-1-3
Hollow Metallic Waveguides Part 1: General Requirements and
Measuring Methods First Edition
Hollow Metallic Waveguides Part 2: Relevant Specifications for
Ordinary Rectangular Waveguides Second Edition
Hollow Metallic Waveguides Part 3: Relevant Specifications for Flat
Rectangular Waveguides First Edition
Hollow Metallic Waveguides Part 4: Relevant Specifications for
Circular Waveguides Second Edition
Hollow Metallic Waveguides Part 6: Relevant Specifications for
Medium Flat Rectangular Waveguides First Edition; (Amendment 11977)
Hollow Metallic Waveguides Part 7: Relevant Specifications for
Square Waveguides First Edition
Flanges for Waveguides Part 1: General Requirements Second
Edition; Amendment 1-1993
Flanges for Waveguides; Part 2: Relevant Specifications for Flanges
for Ordinary Rectangular Waveguides Second Edition; Amendment
1-1997
Flanges for Waveguides Part 3: Relevant Specifications for Flanges
for Flat Rectangular Waveguides Second Edition
Flanges for Waveguides Part 4: Relevant Specifications for Flanges
for Circular Waveguides First Edition
Flanges for Waveguides Part 6: Relevant Specifications for Flanges
for Medium Flat Rectangular Waveguides First Edition
Flanges for Waveguides Part 7: Relevant Specifications for Flanges
for Square Waveguides First Edition
Glow-Starters for Fluorescent Lamps Fourth Edition; Amendment 11995
Insulating Liquids - Determination of the Breakdown Voltage at
Power Frequency - Test Method Second Edition
Methods of Test for the Determination of the Insulation Resistance of
Solid Insulating Materials First Edition
Radio-Frequency Connectors Part 1: General Requirements and
Measuring Methods Second Edition; Amendment 1-1996
Radio-Frequency Connectors Part 2: Coaxial Unmatched Connector
First Edition; Corrigendum-10/1975; Amendment 1-1982
Tests on Indoor and Outdoor Post Insulators of Ceramic Material or
Glass for Systems with Nominal Voltages Greater Than 1 000 V
Edition 4:1994 Consolidated with Amendments 1:1997 and 2:2000
Radio-Frequency Connectors Part 1: General Requirements and
Measuring Methods Section One - Electrical Tests and Measuring
Procedures: Reflection Factor First Edition
Radio-Frequency Connectors Part 1: General Requirements and
Measuring Methods Section Three - Electrical Tests and Measuring
Procedures: Screening Effectiveness First Edition; Amendment 11996
60169-3
60169-4
60169-5
60169-6
60169-7
60169-8
60169-9
60169-10
60169-11
60169-12
60169-13
60169-14
60172
60173
60181
60183
Radio-Frequency Connectors Part 3: Two Pin Connector for Twin
Balanced Aerial Feeders First Edition
Radio-Frequency Connectors Part 4: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 16 mm (0.63 in) with Screw Lock
Characteristic Impedance 50 Ohms (Type 7-16) Second Edition
Radio-Frequency Connectors Part 5: R.F. Coaxial Connectors for
Cables 96 IEC 50-17 and Larger First Edition
Radio-Frequency Connectors Part 6: R.F. Coaxial Connectors for
Cables 96 IEC 75-17 and Larger First Edition
Radio-Frequency Connectors Part 7: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 9,5 mm (0.374 in) with Bayonet
Lock - Characteristic Impedance 50 Ohms (Type C) First Edition;
Amendment 1-1993
Radio-Frequency Connectors Part 8: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 6.5 mm (0.256 in) with Bayonet
Lock - Characteristic Impedance 50 Ohms (Type BNC) First Edition:
Amendment 1-1996; Amendment 2-1997
Radio-Frequency Connectors Part 9: RF Coaxial Connectors with
Inner Diameter of Outer Conductor 3 mm (0.12 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type SMC) First
Edition; Amendment 1-1996; IECQ QC 221400
Radio-Frequency Connectors Part 10: RF Coaxial Connectors with
Inner Diameter of Outer Conductor 3 mm (0.12 in) with Snap-On
Coupling - Characteristic Impedance 50 Ohms (Type SMB) First
Edition; Amendment 1-1986; Amendment 2-1996; IECQ QC 221300
Radio-Frequency Connectors Part 11: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 9.5 mm (0.374 in) with Screw
Coupling-Characteristic Impedance 50 Ohms (Type 4.1/9.5) First
Edition
Radio-Frequency Connectors Part 12: R.F. Coaxial Connectors with
Screw Coupling, Unmatched (Type UHF) First Edition
Radio Frequency Connectors Part 13: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 5.6 mm (0.22 in) - Characteristic
Impedance 75 Ohms (Type 1.6/5.6) - Characteristic Impedance 50
Ohms (Type 1.8/5.6) with Similar Mating Dimensions First Edi
Radio-Frequency Connectors Part 14: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 12 mm (0.472 in) with Screw
Coupling - Characteristic Impedance 75 Ohms (Type 3.5/12) First
Edition
Test Procedure for the Determination of the Temperature Index of
Enamelled Winding Wires Third Edition; Amendment 1- 1997
Colours of the Cores of Flexible Cables and Cords First Edition
Index of Electrical Measuring Apparatus Used in Connection with
Ionizing Radiation First Edition; Supplement A-1965; Supplement B1965; Amendment 1-1967
Guide to the Selection of High-Voltage Cables Second Edition;
60186
60169-15
60169-16
60169-17
60169-18
60169-19
60169-20
60169-21
60169-22
60169-23
60169-24
60169-25
60169-26
Amendment 1-1990
Voltage Transformers Second Edition; (Amendment 1-1988)
(Amendment 2-1995)
Radio-Frequency Connectors Part 15: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 4.13 mm (0.163 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type SMA) First
Edition; Amendment 1-1996; IECQ 221100
Radio-Frequency Connectors Part 16: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 7 mm (0.276 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (75 Ohms (Type N)
First Edition; Amendment 1-1996; IECQ 222100
Radio-Frequency Connectors Part 17: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 6,5 mm (0,256 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type TNC) First
Edition; Amendment 1-1993; IECQ QC 222000
Radio-Frequency Connectors Part 18: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 2.79 mm (0.110 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type SSMA) First
Edition
Radio-Frequency Connectors Part 19: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 2,08 mm (0,082 in) with Snap
Coupling - Characteristics Impedance 50 Ohms (Type SSMB) First
Edition; Corrigendum 07/1995
Radio-Frequency Connectors Part 20: R.F. Coaxial Connectors with
Inner Diameter of Outer Conductor 2.08 mm (0.082 in) with Screw
Coupling - Characteristic Impedance 50 Ohms (Type SSMC) First
Edition
Radio-Frequency Connectors Part 21: Two Types of RadioFrequency Connectors with Inner Diameter of Outer Conductor 9.5
mm (0.374 in) with Different Versions of Screw Coupling Characteristic Impedance 50 Ohms (Types SC-A and SC-B) First
Edition; Amendment
Radio-Frequency Connectors Part 22: R.F. Two-Pole Bayonet
Coupled Connectors for Use with Shielded Balanced Cables Having
Twin Inner Conductors (Type BNO) First Edition
Radio-Frequency Connectors Part 23: Pin and Socket Connector for
Use with 3,5 mm Rigid Precision Coaxial Lines with Inner Diameter
of Outer Conductor 3,5 mm (0,1378 in) First Edition
Radio-Frequency Connectors Part 24: Radio-Frequency Coaxial
Connectors with Screw Coupling, Typically for Use in 75 Ohm Cable
Distribution Systems (Type F) First Edition; Corrigendum 1995
Radio-Frequency Connectors Part 25: Two-Pole Screw (3/4-20
UNEF) Coupled Connectors for Use with Shielded Balanced Cables
Having Twin Inner Conductors with Inner Diameter of Outer
Conductor 13,56 mm (0,534 in) (Type TWHN) First Edition
Radio-Frequency Connectors - Part 26: R.F. Coaxial Connectors with
60169-27
60169-28
60188
60190
60191-3
60191-4
60169-29
60189-1
60189-2
60189-3
60189-4
60189-5
60189-6
60189-7
Screw Coupling - Characteristic Impedance 50 Ohms - Frequency
Range 0 to 18 GHz (Type TNC 18 GHz) First Edition
Radio-Frequency Connectors - Part 27: Radio-Frequency Coaxial
Connectors with Screw Coupling, Typically for Use in 75 Ohms
Cable Distribution Systems (Type E) First Edition
Radio-Frequency Connectors - Part 28: Radio-Frequency Coaxial
Connectors with Inner Diameter of Outer Conductor of 5,60 mm
(0,220 in) with Snap-On Coupling - Characteristic Impedance 75
Ohms First Edition
High-Pressure Mercury Vapour Lamps - Performance Specifications
Third Edition
Non-Wirewound Potentiometers Type 2 First Edition
Mechanical Standardization of Semiconductor Devices - Part 3:
General Rules for the Preparation of Outline Drawings of Integrated
Circuits Second Edition
Mechanical Standardization of Semiconductor Devices Part 4:
Coding System and Classification into Forms of Package Outlines for
Semiconductor Device Packages
Radio-Frequency Connectors - Part 29: Miniature R.F. Coaxial
Connectors with Screw-, Push-Pull, and Snap-On Coupling or SlideIn Rack and Panel Applications - Characteristic Impedance 50 Ohms
(Type 1,0/2,3) First Edition
Low-Frequency Cables and Wires with PVC Insulation and PVC
Sheath Part 1: General Test and Measuring Methods Second Edition;
Amendment 3-1992, Incorporating Amendments 1 and 2
Low-Frequency Cables and Wires with P.V.C Insulation and P.V.C
Sheath Part 2: Cables in Pairs, Triples, Quads and Quintuples for
Inside Installations Third Edition; Amendment 1-1989; Amendment
2-1996
Low-Frequency Cables and Wires with PVC Insulation and PVC
Sheath Part 3: Equipment Wires with Solid or Stranded Conductor,
PVC Insulated, in Singles, Pairs and Triples Third Edition;
Amendment 1-1989
Low-Frequency Cables and Wires with P.V.C. Insulation and P.V.C.
Sheath Part 4: Distribution Wires with Solid Conductors, P.V.C.
Insulated, in Pairs, Triples, Quads and Quintuples Second Edition;
Amendment 1-1989
Low-Frequency Cables and Wires with PVC Insulation and PVC
Sheath Part 5: Equipment Wires and Cables with Solid or Stranded
Conductors, PVC Insulated, Screened, Single or One Pair Second
Edition; Amendment 2-1992, Incorporating Amendment 1
Low-Frequency Cables and Wires with PVC Insulation and PVC
Sheath Part 6: Signalling Cables in Singles for Telecommunication
Equipment and Installation Second Edition; (Amendment 1-1989)
Low-Frequency Cables and Wires with P.V.C. Insulation and P.V.C.
Sheath Part 7: Distribution Wires with Solid Conductors, P.V.C.
60191-1
60191-5
60191-6-1
60191-6-3
60191-6-5
60191-6-6
60192
60193
60194
60195
60191-6-8
60196
60197
60204-1
60204-11
60204-31
Insulated, Polyamide Coated, in Singles, Pairs, Triples, Quads and
Quintuples Second Edition; (Amendment 1-1989)
Mechanical Standardization of Semiconductor Devices Part 1:
Preparation of Drawings of Semiconductor Devices First Edition;
(Supplement A-1969) (Supplement B-1970) (Supplement C-1974)
Mechanical Standardization of Semiconductor Devices - Part 5:
Recommendations Applying to Integrated Circuit Packages Using
Tape Automated Bonding (TAB) Second Edition
Mechanical Standardization of Semiconductor Devices - Part 6-1:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Design Guide for GullWing Lead Terminals First Edition
Mechanical Standardization of Semiconductor Devices - Part 6-3:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Measuring Methods for
Package Dimensions of Quad Flat Packs (QFP) First Edition
Mechanical Standardization of Semiconductor Devices - Part 6-5:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Design Guide for Fine
Pitch-Pitch Ball Grid Array (FBGA) First Edition
Mechanical Standardization of Semiconductor Devices - Part 6-6:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Design Guide for Fine
Pitch Land Grid Array (FLGA) First Edition
Low-Pressure Sodium Vapour Lamps - Performance Specifications
Third Edition
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Model
Acceptance Tests Second Edition
Printed Board Design, Manufacture and Assembly - Terms and
Definitions Fourth Edition
Method of Measurement of Current Noise Generated in Fixed
Resistors First Edition
Mechanical Standardization of Semiconductor Devices - Part 6-8:
General Rules for the Preparation of Outline Drawings of Surface
Mounted Semiconductor Device Packages - Design Guide for Glass
Sealed Ceramic Quad Flatpack (G-QFP) First Edition
IEC Standard Frequencies First Edition
High-Voltage Connecting Wire with Flame Retarding Insulation for
Use in Television Receivers First Edition
Safety of Machinery - Electrical Equipment of Machines - Part 1:
General Requirements Edition 4.1; Edition 4 Consolidated with
Amendment 1: 1999
Safety of Machinery - Electrical Equipment of Machines - Part 11:
Requirements for HV Equipment for Voltages Above 1 000 V a.c. or
1 500 V d.c. and Not Exceeding 36 kV First Edition
Electrical Equipment of Industrial Machines - Part 31: Particular
60204-32
60205
60211
60212
60214
60215
60216-1
60216-2
60216-3-1
60216-3-2
60216-4-1
60216-4-2
60216-4-3
60227-2
60227-3
60227-4
60227-6
Requirements for Sewing Machines, Units and Systems Second
Edition; Replaces IEC 204-3-1: 1988
Safety of Machinery - Electrical Equipment of Machines - Part 32:
Requirements for Hoisting Machines First Edition
Calculation of the Effective Parameters of Magnetic Piece Parts
Second Edition
Maximum Demand Indicators, Class 1.0 First Edition
Standard Conditions for Use Prior to and During the Testing of Solid
Electrical Insulating Materials Second Edition
On-Load Tap-Changers Third Edition
Safety Requirements for Radio Transmitting Equipment Third
Edition; Amendment 2-1993, Incorporating Amendment 1
Electrical Insulating Materials - Properties of Thermal Endurance Part 1: Ageing Procedures and Evaluation of Test Results Fifth
Edition
Guide for the Determination of Thermal Endurance Properties of
Electrical Insulating Materials Part 2: Choice of Test Criteria Third
Edition
Guide for the Determination of Thermal Endurance Properties of
Electrical Insulating Materials Part 3: Instructions for Calculating
Thermal Endurance Characteristics Section 1 - Calculations Using
Mean Values of Normally Distributed Complete Data Third Edi
Guide for the Determination of Thermal Endurance Properties of
Electrical Insulating Materials Part 3: Instructions for Calculating
Thermal Endurance Characteristics Section 2 - Calculations for
Incomplete Data: Proof Test Results up to and Including the M
Guide for the Determination of Thermal Endurance Properties of
Electrical Insulating Materials Part 4: Ageing Ovens Section One:
Single-Chamber Ovens Third Edition
Elecrical Insulating Materials - Thermal Endurance Properties - Part
4-2: Ageing Ovens - Precision Ovens for Use Up to 300 Degrees
Celsius First Edition
Elecrical Insulating Materials - Thermal Endurance Properties - Part
4-3: Ageing Ovens - Multi-Chamber Ovens First Edition
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V - Part 2: Test Methods Second Edition;
Corrigendum 1998
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V - Part 3: Non-Sheathed Cables for Fixed Wiring
Edition 2.1
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V; Part 4: Sheathed Cables for Fixed Wiring
Second Edition; Amendment 1-1997
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V - Part 6: Lift Cables and Cables for Flexible
Connections Third Edition
60216-5
60227-1
60227-5
60227-7
60228
60229
60230
60231
60233
60235-1
60235-2
60235-3
60235-4
60235-5
60235-6
60235-7
60235-9
60236
60238
60239
Guide for the Determination of Thermal Endurance Properties of
Electrical Insulating Materials Part 5: Guidelines for the Application
of Thermal Endurance Characteristics First Edition
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V Part 1: General Requirements Edition 2.2;
Edition 2: 1993 Consolidated with Amendments 1: 1995 and 2: 1997
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V - Part 5: Flexible Cables (Cords) Edition 2.1;
Edition 2: 1997 Consolidated with Amendment 1: 1997
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and
Including 450/750 V Part 7: Flexible Cables Screened and
Unscreened with Two or More Conductors First Edition
Conductors of Insulated Cables Second Edition; Errata-09/1979;
Supplement A-1982; Amendment 1-1993
Tests on Cable Oversheaths Which Have a Special Protective
Function and Are Applied by Extrusion Second Edition
Impulse Tests on Cables and Their Accessories First Edition
General Principles of Nuclear Reactor Instrumentation First Edition;
Supplement A-1969; Supplement B-1972; Supplement C-1974;
Supplement D-1975; Supplement E-1977; Supplement F-1977;
Supplement G-1977
Tests on Hollow Insulators for Use in Electrical Equipment Second
Edition; Amendment 1-1988
Measurement of the Electrical Properties of Microwave Tubes Part 1:
Terminology Second Edition; Supplement A-1975
Measurement of the Electrical Properties of Microwave Tubes Part 2:
General Measurements, Chapter VI: Methods of Measuring the
Effects of Non-Linearity First Edition; Supplement A-1974;
Supplement B-1975; Supplement C-E:1976
Measurement of the Electrical Properties of Microwave Tubes Part 3:
Disk Seal Tubes First Edition
Measurement of the Electrical Properties of Microwave Tubes Part 4:
Magnetrons Clause 4: Voltage Tunable Magnetron First Edition;
Supplement A-1975
Measurement of the Electrical Properties of Microwave Tubes Part 5:
Low-Power Oscillator Klystrons First Edition
Measurement of the Electrical Properties of Microwave Tubes Part 6:
High-Power Klystrons First Edition
Measurement of the Electrical Properties of Microwave Tubes Part 7:
Gas-Filled Microwave Switching Devices First Edition
Measurement of the Electrical Properties of Microwave Tubes Part 9:
Crossed-Field Amplifier Tubes First Edition
Methods for the Designation of Electrostatic Deflecting Electrodes of
Cathode-Ray Tubes Second Edition
Edison Screw Lampholders Edition 7.1
Nominal Dimensions of Cylindrical Machined Graphite Electrodes
60240-1
60243-1
60243-2
60243-3
60244-1
60244-2
60244-3
60244-4
60244-5
60244-6
60244-7
60244-8
60244-9
60244-10
60244-11
60244-12-1
with Threaded Sockets and Nipples for Use in Electric Arc Furnaces
Third Edition
Characteristics of Electric Infra-Red Emitters for Industrial Heating
Part 1: Short Wave Infra-Red Emitters Second Edition
Electrical Strength of Insulating Materials - Test Methods - Part 1:
Tests at Power Frequencies Second Edition
Electric Strength of Insulating Materials - Test Methods - Part 2:
Additional Requirements for Tests Using Direct Voltage Second
Edition
Electric Strength of Insulating Materials - Test Methods - Part 3:
Additional Requirements for 1,2/50 us Impulse Tests Second Edition
Methods of Measurement for Radio Transmitters - Part 1: General
Characteristics for Broadcast Transmitters Second Edition
Methods of Measurement for Radio Transmitters Part 2: Bandwidth,
Out-of-Band Power and Power of Non-Essential Oscillations First
Edition; Supplement A-1969; Amendment 1-1973 to Supplement A;
Amendment 1-1974; Supplement B-1969
Methods of Measurement for Radio Transmitters Part 3: Wanted and
Unwanted Modulation Unwanted Modulation, Including Hum and
Noise Modulation First Edition; Supplement A-1971; Supplement B1972
Methods of Measurement for Radio Transmitters Part 4:
Amplitude/Frequency Characteristics and Non-Linearity Distortion in
Transmitters for Radiotelephony and Sound Broadcasting First
Edition; Supplement A-1976
Methods of Measurement for Radio Transmitters Part 5: Performance
Characteristics of Television Transmitters Second Edition
Methods of Measurement for Radio Transmitters Part 6: Cabinet
Radiation at Frequencies between 130 kHz and 1 GHz First Edition
Methods of Measurement for Radio Transmitters Part 7: Cabinet
Radiation at Frequencies Above 1 GHz Section Four - Medium-Sized
Transmitters Section Five - Large Transmitters First Edition;
Supplement A-1980
Methods of Measurement for Radio Transmitters Part 8: Performance
Characteristics of Vestigial-Sideband Demodulators Used for Testing
Television Transmitters and Transposers Second Edition
Methods of Measurement of Radio Transmitters Part 9: Performance
Characteristics for Television Transposers Second Edition
Methods of Measurement for Radio Transmitters Part 10: Methods of
Measurement for Television Transmitters and Transposers
Employing Insertion Test Signals First Edition
Methods of Measurement for Radio Transmitters Part 11:
Transposers for FM Sound Broadcasting First Edition
Methods of Measurement for Radio Transmitters Part 12: Guideline
for Drawing up Descriptive Leaflets for Transmitters and Transposers
for Sound and Television Broadcasting - Characteristics to Be
60244-12-2
60244-13
60244-14
60244-15
60245-1
60245-3
60245-4
60245-5
60245-2
60245-6
60245-7
60245-8
60246
60247
60248
60249-1
60249-2-1
Specified First Edition
Methods of Measurement for Radio Transmitters Part 12: Guideline
for Drawing up Descriptive Leaflets for Transmitters and Transposers
for Sound and Television Broadcasting - Specification Sheets First
Edition
Methods of Measurement for Radio Transmitters Part 13:
Performance Characteristics for FM Sound Broadcasting First Edition
Methods of Measurement for Radio Transmitters - Part 14: External
Intermodulation Products Caused by Two or More Transmitters
Using the Same or Adjacent Antennas First Edition
Methods of Measurement for Radio Transmitters - Part 15:
Amplitude-Modulated Transmitters for Sound Broadcasting First
Edition
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 1: General Requirements Edition 3.2; Edition 3:
1994 Consolidated with Amendments 1: 1997 and 2: 1997
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 3: Heat Resistant Silicone Insulated Cables Second
Edition; Amendment 1-1997
Rubber Insulated Cables - Rated Voltage up to and Including 450/750
V - Part 4: Cords and Flexible Cables Second Edition; Amendment 11997
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 5: Lift Cables Second Edition
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 2: Test Methods Edition 2.2; Edition 2: 1994
Consolidated with Amendments 1: 1997 and 2: 1997
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 6: Arc Welding Electrode Cables Second Edition;
Amendment 1-1997
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 7: Heat Resistant Ethylene-Vinyl Acetate Rubber
Insulated Cables First Edition; Amendment 1 05-1997
Rubber Insulated Cables - Rated Voltages up to and Including
450/750 V - Part 8: Cords for Applications Requiring High
Flexibility First Edition
Connecting Wires Having a Rated Voltage of 20 kV and 25 kV D.C.
and a Maximum Working Temperature of 105 Degrees C for Use in
Television Receivers First Edition
Measurement of Relative Permittivity, Dielectric Dissipation Factor
and D.C. Resistivity of Insulating Liquids Second Edition
Dimensions of Planchets Used in Nuclear Electronic Instruments
Second Edition
Base Materials for Printed Circuits Part 1: Test Methods Second
Edition; Amendment 4-1993, Incorporating Amendments 1 Thru 3
Base Materials for Printed Circuits Part 2: Specifications
60249-2-2
60249-2-3
60249-2-4
60249-2-5
60249-2-6
60249-2-7
60249-2-8
60252-1
60249-2-9
60249-2-10
Specification No.1: Phenolic Cellulose Paper Copper-Clad Laminated
Sheet, High Electrical Quality Second Edition; Amendment 4
03/2000, Incorporating Amendment 2 1993 and Amendment 3
1994
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 2: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet, Economic Quality Second Edition; Amendment
5:3/2000; Incorporating Amendment 3:1993 and Amendment 4:1994
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 3: Epoxide Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test)
Second Edition; Amendment 4 03-2000, Incorporating Amendment 2
1993 and Amen
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 4: Epoxide Woven Glass Fabric Copper-Clad
Laminated Sheet, General Purpose Grade Second Edition;
Amendment 5 03-2000, Incorporating Amendments 3 1993 and 4
1994
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 5: Epoxide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test)
Second Edition; Amendment 3-05 1993, Incorporating Amendments
1 and 2; Am
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 6: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Horizontal Burning Test)
Second Edition; Amendment 2-1993, Incorporating Amendment 1;
Amendment 3Base Materials for Printed Circuits Part 2: Specifications
Specification No. 7: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test)
Second Edition; Amendment 2- 05-1993, Incorporating Amendment
1; Amendment
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 8: Flexible Copper-Clad Polyester (PETP) Film
First Edition; Amendment 1-1993
AC Motor Capacitors - Part 1: General - Performance, Testing and
Rating - Safety Requirements - Guide for Installation and Operation
First Edition; Replaces 60252
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 9: Epoxide Cellulose Paper Core, Epoxide Glass
Cloth Surfaces Copper-Clad Laminated Sheet of Defined
Flammability (Vertical Burning Test) First Edition; Amendment 3,
5/1993, Incor
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 10: Epoxide Non-Woven/Woven Glass Reinforced
60249-2-11
60249-2-12
60249-2-13
60249-2-14
60249-2-15
60249-2-16
60249-2-17
60249-2-18
60249-2-19
60254-1
Copper-Clad Laminated Sheet of Defined Flammability (Vertical
Burning Test) First Edition; Amendment 3, 5/1993, Incorporating
Amendmen
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 11: Thin Epoxide Woven Glass Fabric CopperClad Laminated Sheet, General Purpose Grade, for Use in the
Fabrication of Multilayer Printed Boards First Edition; Amendment
2, 5/1993,
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 12: Thin Epoxide Woven Glass Fabric CopperClad Laminated Sheet of Defined Flammability, for Use in the
Fabrication of Multilayer Printed Boards Second Edition;
Amendment 2- 05 19
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 13: Flexible Copper-Clad Polyimide Film, General
Purpose Grade First Edition; Amendment 1-1993
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 14: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test),
Economic Quality First Edition; Amendment 3, 5/1993, Incorporating
Amendm
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 15: Flexible Copper-Clad Polyimide Film, of
Defined Flammability First Edition; Amendment 1-1993
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 16: Polyimide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test)
First Edition; Amendment 1 03/1993; Amendment 2 05/1994;
Amendment 3 0
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 17: Thin Polyimide Woven Glass Fabric CopperClad Laminated Sheet of Defined Flammability for Use in the
Fabrication of Multilayer Printed Boards First Edition; Corrigendum,
6/199
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 18: Bismaleimide/Triazine Modified Epoxide
Woven Glass Fabric Copper-Clad Laminated Sheet of Defined
Flammability (Vertical Burning Test) First Edition; Amendment 1,
5/1993; Amend
Base Materials for Printed Circuits Part 2: Specifications
Specification No. 19: Thin Bismaleimide/Triazine Modified Epoxide
Woven Glass Fabric Copper-Clad Laminated Sheet of Defined
Flammability for Use in the Fabrication of Multilayer Printed Boards
Firs
Lead-Acid Traction Batteries - Part 1: General Requirements and
Methods of Test Third Edition
60254-2
60254-2
60249-3-1
60249-3-3
60250
60255-3
60255-5
60255-6
60255-8
60255-9
60255-11
60255-12
60255-13
60255-14
60255-15
60255-16
60255-19
60255-19-1
60255-21-1
Lead-Acid Traction Batteries - Part 2: Dimensions of Cells and
Terminals and Marking of Polarity on Cells Edition 3.1
Lead-Acid Traction Batteries - Part 2: Dimensions of Cells and
Terminals and Marking of Polarity on Cells Third Edition;
Amendment 1 05-2000
Base Materials for Printed Circuits Part 3: Special Materials Used in
Connection with Printed Circuits Specification No. 1: Prepreg for
Use as Bonding Sheet Material in the Fabrication of Multilayer
Printed Boards Second Edition
Base Materials for Printed Circuits Part 3: Special Materials Used in
Connection with Printed Circuits Specification No.3: Permanent
Polymer Coating Materials (Solder Resist) for Use in the Fabrication
of Printed Boards First Edition
Recommended Methods for the Determination of the Permittivity and
Dielectric Dissipation Factor of Electrical Insulating Materials at
Power, Audio and Radio Frequencies Including Metre Wavelengths
First Edition
Electrical Relays Part 3: Single Input Energizing Quantity Measuring
Relays with Dependent or Independent Time Second Edition
Electrical Relays - Part 5: Insulation Coordination for Measuring
Relays and Protection Equipment - Requirements and Tests Second
Edition
Electrical Relays Part 6: Measuring Relays and Protection Equipment
Second Edition
Electrical Relays Part 8: Thermal Electrical Relays Second Edition
Electrical Relays Part 9: Dry Reed Make Contact Units First Edition
Electrical Relays Part 11: Interruptions to and Alternating Component
(Ripple) in D.C. Auxiliary Energizing Quantity of Measuring Relays
First Edition
Electrical Relays Part 12: Directional Relays and Power Relays with
Two Input Energizing Quantities First Edition
Electrical Relays Part 13: Biased (Percentage) Differential Relays
First Edition
Electrical Relays Part 14: Endurance Test for Electrical Relay
Contacts - Preferred Values for Contact Loads First Edition
Electrical Relays Part 15: Endurance Tests for Electrical Relay
Contacts - Specification for the Characteristics of Test Equipment
First Edition
Electrical Relays Part 16: Impedance Measuring Relays First Edition
Electrical Relays Part 19: Sectional Specification: Electromechanical
All-or-Nothing Relays of Assessed Quality First Edition; IECQ QC
160100
Electrical Relays Part 19: Blank Detail Specification:
Electromechanical All-or-Nothing Relays of Assessed Quality Test
Schedules 1, 2 and 3 First Edition; IECQ QC 160101
Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests
60255-21-2
60255-21-3
60255-22-1
60255-22-2
60255-22-4
60255-22-3
60255-22-6
60255-23
60255-24
60255-25
60256
60258
60261
60263
60264-1
60264-2-1
60264-2-2
60264-2-3
on Measuring Relays and Protection Equipment Section One Vibration Tests (Sinusoidal) First Edition
Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests
on Measuring Relays and Protection Equipment Section Two - Shock
and Bump Tests First Edition
Electrical Relays - Part 21: Vibration, Shock, Bump and Seismic
Tests on Measuring Relays and Protection Equipment - Section 3:
Seismic Tests First Edition; CENELEC EN 60255-21-3: 1995
Electrical Disturbance Tests for Measuring Relays and Protection
Equipment Part 1: 1 MHz Burst Disturbance Tests First Edition
Electrical Relays - Part 22: Electrical Disturbance Tests for
Measuring Relays and Protection Equipment - Section 2: Electrostatic
Discharge Tests Second Edition
Electrical Relays Part 22: Electrical Disturbance Tests for Measuring
Relays and Protection Equipment Section 4: Fast Transient
Disturbance Test First Edition
Electrical Relays - Part 22-3: Electrical Disturbance Tests for
Measuring Relays and Protection Equipment - Radiated
Electromagnetic Field Disturbance Tests Second Edition
Electrical Relays - Part 22-6: Electrical Disturbance Tests for
Measuring Relays and Protection Equipment - Immunity to
Conducted Disturbances Induced by Radio Frequency Fields First
Edition
Electrical Relays - Part 23: Contact Performance First Edition;
Corrigendum-1996; Cancels and Replaces IEC 60255-0-20: 1974
Electrical Relays - Part 24: Common Format for Transient Data
Exchange (COMTRADE) for Power Systems First Edition
Electrial Relays - Part 25:Electromagnetic Emission Tests for
Measuring Relays and Protection Equipment First Edition
External Diameters of Cylindrical Radiation Probes Containing
Geiger-Muller or Proportional Counter Tubes or Scintillation
Detectors First Edition
Direct Acting Recording Electrical Measuring Instruments and Their
Accessories First Edition; Amendment 1-1976
Sealing Test for Pressurized Waveguide Tubing and Assemblies
Second Edition
Scales and Sizes for Plotting Frequency Characteristics and Polar
Diagrams Third Edition
Packaging of Winding Wires Part 1: Containers for Round Winding
Wires First Edition
Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery
Spools Section One - Basic Dimensions First Edition
Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery
Spools Section 2 - Specification for Returnable Spools Made from
Thermoplastic Material First Edition
Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery
60264-3-1
60264-3-2
60264-3-3
60264-3-4
60264-3-5
60264-4-1
60264-4-2
60264-5-1
60265-1
60265-2
60264-5-2
60268-1
60268-16
60268-17
TR 60268-18
60269-1
60269-2
Spools Section 3 - Specification for Non-Returnable Spools Made
from Thermoplastic Material First Edition
Packaging of Winding Wires - Part 3-1: Taper Barrelled Delivery
Spools - Basic Dimensions Second Edition
Packaging of Winding Wires - Part 3-2: Taper Barrelled Delivery
Spools - Specification for Returnable Spools Made from
Thermoplastic Materials Second Edition
Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools
Section 3 - Specification for Non-Returnable Spools Made from
Thermoplastic Material First Edition
Packaging of Winding Wires - Part 3-4: Taper Barrelled Delivery
Spools - Basic Dimensions of Containers for Taper Barrelled
Delivery Spools Second Edition
Packaging of Winding Wires - Part 3-5: Taper Barrelled Delivery
Spools - Specification for Spool Containers Made from
Thermoplastic Material Second Edition
Packaging of Winding Wires - Part 4-1: Methods of Test - Delivery
Spools Made from Thermoplastic Materials Second Edition
Packaging of Winding Wires Part 4: Methods of Test Section 2:
Containers Made from Thermoplastic Material for Taper Barrelled
Delivery Spools First Edition
Packaging of Winding Wires - Part 5-1: Cylindrical Barrelled
Delivery Spools with Conical Flanges - Basic Dimensions First
Edition
High-Voltage Switches - Part 1: Switches for Rated Voltages Above
1 kV and Less Than 52 kV Third Edition; Corrigendum - 05 2000
High-Voltage Switches Part 2: High-Voltage Switches for Rated
Voltages of 52 kV and Above First Edition; Corrigendum-1990;
Amendment 1-1994; Amendment 2-1998
Packaging of Winding Wires - Part 5-2: Cylindrical Barrelled
Delivery Spools with Conical Flanges - Specification for Returnable
Spools Made from Thermoplastic Material First Edition
Sound System Equipment Part 1: General Second Edition;
Amendment 1: 1988; Amendment 2-1988
Sound System Equipment - Part 16: Objective Rating of Speech
Intelligibility by Speech Transmission Index Second Edition
Sound System Equipment Part 17: Standard Volume Indicators First
Edition
Sound System Equipment Part 18: Peak Programme Level Meters Digital Audio Peak Level Meter First Edition
Low-Voltage Fuses - Part 1: General Requirements Third Edition;
Corrigendum: 12-2000
Low-Voltage Fuses Part 2: Supplementary Requirements for Fuses
for Use by Authorized Persons (Fuses Mainly for Industrial
Application) Second Edition; Amendment 1-1995; Corrigendum1996
60269-2-1
60269-3
60269-3-1
60269-4
60270
60273
60276
60279
60282-1
60282-2
60282-3
60283
60285
60286-1
60286-2
60286-3
60286-4
Low-Voltage Fuses - Part 2-1: Supplementary Requirements for
Fuses for Use by Authorized Persons (Fuses Mainly for Industrial
Application) - Sections I to V: Examples of Types of Standardized
Fuses Edition 3.1; Edition 3: 1998 Consolidated with Amendment 1
Low-Voltage Fuses Part 3: Supplementary Requirements for Fuses
for Use by Unskilled Persons (Fuses Mainly for Household and
Similar Applications) Second Edition
Low-Voltage Fuses - Part 3-1: Supplementary Requirements for
Fuses for Use by Unskilled Persons (Fuses Mainly for Household and
Similar Applications) - Sections I to IV Edition 1:1994 Consolidated
with Amendments 1:1995 and 2:2001
Low-Voltage Fuses - Part 4: Supplementary Requirements for FuseLinks for the Protection of Semiconductor Devices Third Edition;
Amendment 1-1995
High-Voltage Test Techniques - Partial Discharge Measurements
Third Edition
Characteristics of Indoor and Outdoor Post Insulators for Systems
with Nominal Voltages Greater Than 1000 V Third Edition
Definitions and Nomenclature for Carbon Brushes, Brush-Holders,
Commutators and Slip-Rings First Edition; Amendment 1-1987
Measurement of the Winding Resistance of an A.C. Machine During
Operation at Alternating Voltage First Edition
High-Voltage Fuses - Part 1: Current-Limiting Fuses Edition 4.2;
Edition 4: 1994 Consolidated with Amendments 1: 1996 and 2: 1997
High-Voltage Fuses - Part 2: Expulsion Fuses Edition 2.1; Edition
2:1995 Consolidated with Amendment 1:1997
High-Voltage Fuses Part 3: Determination of Short-Circuit Power
Factor for Testing Current-Limiting Fuses and Expulsion and Similar
Fuses First Edition
Methods for the Measurement of Frequency and Equivalent
Resistance of Unwanted Resonances of Filter Crystal Units First
Edition
Alkaline Secondary Cells and Batteries - Sealed Nickel-Cadmium
Cylindrical Rechargeable Single Cells Eediton 3.2; Edition 3: 1993
Consolidated with Amendments 1: 1995 and 2: 1998
Packaging of Components for Automatic Handling - Part 1: Tape
Packaging of Components with Axial Leads on Continuous Tapes
Second Edition
Packaging of Components for Automatic Handling - Part 2: Tape
Packaging of Components with Unidirectional Leads on Continuous
Tapes Second Edition
Packaging of Components for Automatic Handling - Part 3:
Packaging of Surface Mount Components on Continuous Tapes Third
Edition
Packaging of Components for Automatic Handling - Part 4: Stick
Magazines for Electronic Components Encapsulated in Packages of
60286-5
60286-6
60287-1-1
60287-1-2
60287-2-1
60287-2-2
60287-3-1
60287-3-2
60289
60291
60294
60296
60297-1
60664-3
60664-4
60665
60666
Form E and G Second Edition
Packaging of Components for Automatic Handling Part 5: Matrix
Trays First Edition
Packaging of Components for Automatic Handling - Part 6: Bulk
Case Packaging for Surface Mounting Components First Edition
Electric Cables - Calculation of the Current Rating - Part 1-1: Current
Rating Equations (100% Load Factor) and Calculation of Losses General First Edition; Supersedes IEC 287: 1982; Amendment 1:
08/1995; Amendment 2: 08/2001
Electric Cables - Calculation of the Current Rating - Part 1: Current
Rating Equations (100% Load Factor) and Calculation of Losses Section 2: Sheath Eddy Current Loss Factors for Two Circuits in Flat
Formation First Edition
Electric Cables - Calculation of the Current Rating - Part 2-1:
Thermal Resistance - Calculation of Thermal Resistance First
Edition; Supersedes IEC 287: 1982; Amendment 1: 08/2001
Electric Cables - Calculation of the Current Rating - Part 2: Thermal
Resistance - Section 2: A Method for Calculating Reduction Factors
for Groups of Cables in Free Air, Protected from Solar Radiation
First Edition; Replaces IEC 1042
Electric Cables - Calculation of the Current Rating - Part 3-1:
Sections on Operating Conditions - Reference Operating Conditions
and Selection of Cable Type Edition 1.1; Edition 1: 1995
Consolidated with Amendment 1: 1999
Electric Cables - Calculation of the Current Rating - Part 3: Sections
on Operating Conditions - Section 2: Economic Optimization of
Power Cable Size First Edition; Amendment 1-1996; Supersedes IEC
61059: 1991
Reactors Second Edition; CENELEC EN 60289: 1994
Fuse Definitions First Edition; Supplement A-1975
Measurement of the Dimensions of a Cylindrical Component Having
Two Axial Terminations First Edition
Specification for Unused Mineral Insulating Oils for Transformers
and Switchgear Second Edition; Amendment 1-1986
Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series
Part 1: Panels and Racks Third Edition
Insulation Coordination for Equipment within Low-Voltage Systems
Part 3: Use of Coatings to Achieve Insulation Coordination of Printed
Board Assemblies First Edition
Insulation Coordination for Equipment within Low-Voltage Systems
- Part 4: Considerations of High-Frequency Voltage Stress First
Edition
A.C. Electric Ventilating Fans and Regulators for Household and
Similar Purposes First Edition
Detection and Determination of Specified Anti-Oxidant Additives in
Insulating Oils First Edition
60667-1
60667-2
60667-3-1
60668
60669-1
60669-2-1
60669-2-2
60669-2-3
60670
60671
60672-1
60672-2
60672-3
60673
60674-1
60674-2
60674-3-1
60674-3-2
Specification for Vulcanized Fibre for Electrical Purposes Part 1:
Definitions and General Requirements First Edition
Specification for Vulcanized Fibre for Electrical Purposes Part 2:
Methods of Test First Edition; (Amendment 1-1986)
Specification for Vulcanized Fibre for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 1: Flat Sheets First
Edition
Dimensions of Panel Areas and Cut-outs for Panel and RackMounted Industrial-Process Measurement and Control Instruments
First Edition
Switches for Household and Similar Fixed-Electrical Installations Part 1: General Requirements Edition 3.1; Edition 3: 1998
Consolidated with Amendment 1: 1999
Switches for Household and Similar Fixed Electrical Installations Part 2-1: Particular Requirements - Electronic Switches Edition 3.2;
Edition 3:Consolidated with Amendments 1:1997 and 2:1999
Switches for Household and Similar Fixed Electrical Installations Part 2: Particular Requirements - Section 2: Electromagnetic RemoteControl Switches (RCS) Second Edition; Amendment 1-1997
Switches for Household and Similar Fixed Electrical Installations Part 2-3: Particular Requirements - Time-Delay Switches (TDS)
Second Edition
General Requirements for Enclosures for Accessories for Household
and Similar Fixed Electrical Installations Second Edition;
(Amendment 1-1994)
Periodic Tests and Monitoring of the Protection System of Nuclear
Reactors First Edition
Ceramic and Glass Insulating Materials - Part 1: Definitions and
Classification Second Edition; CENELEC EN 60672-1: 1995
Ceramic and Glass Insulating Materials - Part 2: Methods of Test
Second Edition
Ceramic and Glass-Insulating Materials Part 3: Specifications for
Individual Materials Second Edition
Low-Frequency Miniature Equipment Wires with Solid or Stranded
Conductor, Fluorinated Polyhydrocarbon Type Insulation, Single
First Edition; Amendment 3-1989, Incorporating Amendments 1 and
2
Specification for Plastic Films for Electrical Purposes Part 1:
Definitions and General Requirements First Edition
Specification for Plastic Films for Electrical Purposes Part 2:
Methods of Test First Edition; Corrigendum-1995; Amendment 1:
10-2001
Plastic Films for Electrical Purposes - Part 3: Specifications for
Individual Materials - Sheet 1: Biaxially Oriented Polypropylene (PP)
Films for Capacitors First Edition
Specification for Plastic Films for Electrical Purposes Part 3:
60674-3-3
60674-3-4 TO 6
60674-3-7
60675
60676
60677
60678
60679-1
60679-2
60679-3
60679-4
60679-4-1
60679-5
60679-5-1
60680
60681-1
60682
60683
60684-1
Specifications for Individual Materials Sheet 2: Requirements for
Balanced Biaxially Oriented Polyethylene Terephthalate (PET) Films
Used for Electrical Insulation First Edition
Specification for Plastic Films for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 3: Requirements for
Polycarbonate (PC) Films Used for Electrical Insulation First Edition
Specification for Plastic Films for Electrical Purposes Part 3:
Specifications for Individual Materials Sheets 4 to 6: Requirements
for Polyimide Films Used for Electrical Insulation First Edition
Specification for Plastic Films for Electrical Purposes Part 3:
Specifications for Individual Materials Sheet 7: Requirements for
Fluoroethylene-Propylene (FEP) Films Used for Electrical Insulation
First Edition
Household Electric Direct-Acting Room Heaters - Methods for
Measuring Performance Edition 2.1; Edition 2: 1994 Consolidated
with Amendment 1: 1998
Test Methods for Direct Arc Furnaces First Edition
Block Transfers in CAMAC Systems First Edition
Definitions of CAMAC Terms Used in IEC Publications First Edition
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 1:
Generic Specification Second Edition; QC 690000
Quartz Crystal Controlled Oscillators Part 2: Guide to the Use of
Quartz Crystal Controlled Oscillators First Edition
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 3:
Standard Outlines and Lead Connections Second Edition
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 4:
Sectional Specification - Capability Approval First Edition; QC
690100
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 4-1:
Blank Detail Specification - Capability Approval First Edition; QC
690101
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 5:
Sectional Specification - Qualification Approval First Edition
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 5-1:
Blank Detail Specification - Qualification Approval First Edition; QC
690201
Test Methods of Plasma Equipment for Electroheat Applications First
Edition
Dimensions of Small Power Motors for Definite Purpose Application
Part 1: Oil Burner Motors First Edition
Standard Method of Measuring the Pinch Temperature of QuartzTungsten-Halogen Lamps First Edition; Amendment 1-1987;
Amendment 2-1997
Test Methods for Submerged-Arc Furnaces First Edition
Specification for Flexible Insulating Sleeving Part 1: Definitions and
General Requirements First Edition; CENELEC EN 60 684-1: 1995
60684-2
60684-3-100 TO
105
60684-3-116 TO
118
60684-3-121 TO
124
60684-3-136
60684-3-145 TO
147
60684-3-151
60684-3-201
60051-9
60055-1
60055-2
60060-2
60061-1
60061-2
Flexible Insulating Sleeving - Part 2: Methods of Test Second
Edition; Corrigendum- 1997
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheets 100 to 105: Extruded PVC Sleeving
Second Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheets 116 to 118:
Extruded Polychloroprene, General Purpose First Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheets 121 and 124: Extruded Silicone Sleeving
Second Edition
Flexible Insulating Sleeving - Part 3: Specification for Individual
Types of Sleeving - Sheet 136: Extruded Fluorosilicone Sleeving General Purpose First Edition; Corrigendum: 02-1999
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheets 145 to 147: Extruded PTFE Sleeving First
Edition
Flexible Insulating Sleeving - Part 3: Specifications for Individual
Types of Sleeving - Sheet 151: Extruded PVC/Nitrile Rubber General Purpose First Edition
Specification for Flexible Insulating Sleeving Part 3: Specification
Requirements for Individual Types of Sleeving Sheet 201: Heat
Shrinkable Sleeving, General Purpose, Flexible, Cross-Linked PVC,
Shrink Ratio 2:1 First Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 9: Recommended Test Methods Fourth
Edition; Amendment 1-1994; Amendment 2-1995
Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to
18/30 kV (with Copper or Aluminium Conductors and Excluding
Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their
Accessories Fifth Edition
Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to
18/30 kV (with Copper or Aluminium Conductors and Excluding
Gas-Pressure and Oil-Filled Cables) Part 2: General and Construction
Requirements First Edition; Amendment 1-1989
High-Voltage Test Techniques Part 2: Measuring Systems Second
Edition; Amendment 1-1996; Replaces 60060-3: 1976
Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 1: Lamp Caps Edition 3.26;
Amended in Accordance with Supplements: A(1970), B(1971),
C(1972), D(1972), E(1972), F(1975), G(1977), H(1977), J(1980),
K(1983),
Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 2: Lampholders Edition 3.23;
Amended in Accordance with Supplements: A(1970), B(1971),
C(1972), D(1975), E(1975), F(1980), G(1983), H(1987), J(1989),
60061-4
60062
60063
60064
60065
60067
60068-1
60061-3
60068-2-1
60068-2-2
60068-2-3
60068-2-5
60068-2-6
60068-2-7
60068-2-9
60068-2-10
60068-2-11
K(1992)
Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 4: Guidelines and General
Information Edition 1.7; First Edition; Supplement A-1992;
Supplement B-1994; Supplement C-1994; Supplement D-1995;
Amendment 5-199
Marking Codes for Resistors and Capacitors Fourth Edition;
Amendment 1-1995
Preferred Number Series for Resistors and Capacitors Second
Edition; Amendment 1-1967; Amendment 2-1977
Tungsten Filament Lamps for Domestic and Similar General Lighting
Purposes - Performance Requirements Sixth Edition; Amendment 1,
11-2000
Audio, Video and Similar Electronic Apparatus - Safety
Requirements Seventh Edition
Dimensions of Electronic Tubes and Valves Second Edition;
Supplement A-1967; Supplement B-1969; Supplement C-1970;
Supplement D-1977; Supplement E-1986
Environmental Testing Part 1: General and Guidance Sixth Edition;
Amendment 1-1992
Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety - Part 3: Gauges Edition 3.25;
Amended in Accordance with Supplements: A(1970), B(1971),
C(1971), D(1972), E(1972), F(1975), G(1977), H(1980), J(1983),
K(1987), L(1
Environmental Testing Part 2: Tests - Tests A: Cold Fifth Edition;
Amendment 1-1993; Amendment 2-1994
Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry
Heat Fourth Edition; Supplement A-1976; Amendment 1-1993;
Amendment 2-1994
Basic Environmental Testing Procedures Part 2: Tests - Test Ca:
Damp Heat, Steady State Third Edition; Amendment 1-1984
Basic Environmental Testing Procedures Part 2: Tests Test Sa:
Simulated Solar Radiation at Ground Level First Edition
Environmental Testing - Part 2: Tests - Test FC: Vibration
(Sinusoidal) Sixth Edition; Corrigendum-1995
Basic Environmental Testing Procedures Part 2: Tests - Test Ga and
Guidance: Acceleration, Steady State Second Edition; Amendment 11986
Basic Environmental Testing Procedures Part 2: Tests - Guidance for
Solar Radiation Testing First Edition; Amendment 1-1984;
Corrigendum-08/1989
Basic Environmental Testing Procedures Part 2: Tests - Test J and
Guidance: Mould Growth Fifth Edition; Corrigendum-04/1989
Basic Environmental Testing Procedures Part 2: Tests- Test Ka: Salt
Mist Third Edition; Corrigendum: December 1999
60068-2-13
60068-2-14
60068-2-17
60068-2-18
60068-2-20
60068-2-21
60068-2-27
60068-2-29
60068-2-30
60068-2-31
60068-2-32
60068-2-33
60068-2-38
60068-2-39
60068-2-40
60068-2-41
60068-2-42
60068-2-43
60068-2-44
60068-2-45
Basic Environmental Testing Procedures Part 2: Tests Test M: Low
Air Pressure Fourth Edition
Basic Environmental Testing Procedures Part 2: Tests Test N:
Change of Temperature Fifth Edition; Amendment 1-1986
Basic Environmental Testing Procedures Part 2: Tests - Test Q:
Sealing Fourth Edition
Environmental Testing Part 2-18: Tests - Test R and Guidance: Water
Second Edition
Basic Environmental Testing Procedures Part 2: Tests Test T:
Soldering Fourth Edition; Amendment 1-1986; Amendment 2-1987
Environmental Testing - Part 2-21: Tests - Test U: Robustness of
Terminations and Integral Mounting Devices Fifth Edition
Basic Environmental Testing Procedures Part 2: Tests - Test Ea and
Guidance: Shock Third Edition
Basic Environmental Testing Procedures Part 2: Tests - Tests Eb and
Guidance: Bump Second Edition; Corrigendum-10/1987
Basic Environmental Testing Procedures Part 2: Tests - Test Db and
Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle) Second Edition;
Amendment 1-1985
Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop
and Topple, Primarily for Equipment- Type Specimens First Edition;
Amendment 1-1982;
Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free
Fall Second Edition; Amendment 2-1990, Incorporating Amendment
1
Basic Environmental Testing Procedures Part 2: Tests - Guidance on
Change of Temperature Tests First Edition; Amendment 1-1978
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AD:
Composite Temperature/Humidity Cyclic Test First Edition
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AMD:
Combined Sequential Cold, Low Air Pressure, and Damp Heat Test
First Edition
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AM:
Combined Cold/Low Air Pressure Tests First Edition; Amendment 11983
Basic Environmental Testing Procedures Part 2: Tests - Test Z/BM:
Combined Dry Heat/Low Air Pressure Tests First Edition;
Amendment 1-1983
Basic Environmental Testing Procedures Part 2: Tests Test Kc:
Sulphur Dioxide Test for Contacts and Connections Second Edition
Basic Environmental Testing Procedures Part 2: Tests Test Kd:
Hydrogen Sulphide Test for Contacts and Connections First Edition
Environmental Testing - Part 2: Tests - Guidance on Test T:
Soldering Second Edition; Corrigendum-08/1995
Basic Environmental Testing Procedures Part 2: Tests Test XA and
Guidance: Immersion in Cleaning Solvents First Edition; Amendment
60068-2-46
60068-2-47
60068-2-48
60068-2-49
60068-2-50
60068-2-51
60068-2-52
60068-2-53
60068-2-54
60068-2-55
60068-2-56
60068-2-57
60068-2-58
60068-2-59
60068-2-60
60068-2-61
60068-2-64
60068-2-65
1-1993
Basic Environmental Testing Procedures Part 2: Tests Guidance to
Test Kd: Hydrogen Sulphide Test for Contacts and Connections First
Edition
Environmental Testing - Part 2-47: Test Methods - Mounting of
Components, Equipment and Other Articles for Vibration, Impact and
Similar Dynamic Tests Second Edition
Basic Environmental Testing Procedures Part 2: Tests Guidance on
the Application of the Tests of IEC Publication 68 to Simulate the
Effects of Storage First Edition
Basic Environmental Testing Procedures Part 2: Tests Guidance to
Test Kc: Sulphur Dioxide Test for Contacts and Connections First
Edition
Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc:
Combined Cold/Vibration (Sinusoidal) Tests for Both HeatDissipating and Non-Heat Dissipating Specimens First Edition
Basic Environmental Testing Procedures Part 2: Tests Tests Z/BFc:
Combined Dry Heat/Vibration (Sinusoidal) Tests for Both HeatDissipating and Non-Heat-Dissipating Specimens First Edition
Environmental Testing - Part 2: Tests - Test Kb: Salt Mist, Cyclic
(Sodium Chloride Solution) Second Edition; Corrigendum-1996
Basic Environmental Testing Procedures Part 2: Tests Guidance to
Tests Z/AFc and Z/BFc: Combined Temperature (Cold and Dry Heat)
and Vibration (Sinusoidal) Tests First Edition
Basic Environmental Testing Procedures Part 2: Tests Test Ta:
Soldering Solderability Testing by the Wetting Balance Method First
Edition
Basic Environmental Testing Procedures Part 2: Tests Test Ee and
Guidance: Bounce First Edition; CENELEC EN 60068-2-55: 1993
Environmental Testing Part 2: Tests - Test Cb: Damp Heat, Steady
State, Primarily for Equipment First Edition
Environmental Testing - Part 2-57: Test - Test Ff: Vibration - TimeHistory Method Second Edition
Environmental Testing Part 2-58: Tests - Test Td: Tsst Methods for
Solderability, Resistance to Dissolution of Metallization and to
Soldering Heat of Surface Mounting Devices (SMD) Second Edition
Environmental Testing Part 2: Test Methods Test Fe: Vibration Sine-Beat Method First Edition
Environmental Testing - Part 2: Tests - Test Ke: Flowing Mixed Gas
Corrosion Test Second Edition
Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic
Sequence First Edition
Environmental Testing Part 2: Test Methods Test Fh: Vibration,
Broad-Band Random (Digital Control) and Guidance First Edition;
Corrigendum-10/1993 Supercedes IEC 60068-2-36
Environmental Testing - Part 2: Methods of Test - Test Fg: Vibration,
60068-2-66
60068-2-67
60068-2-68
60068-2-70
60068-2-74
60068-2-69
60068-2-75
60068-2-77
60068-2-78
60068-3-1
60068-3-2
60068-3-3
60068-3-4
60068-3-5
60068-3-6
60068-3-7
60068-4
Acoustically Induced First Edition
Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat,
Steady State (Unsaturated Pressurized Vapour) First Edition
Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady
State, Accelerated Test Primarily Intended for Components First
Edition
Environmental Testing - Part 2: Tests - Test L: Dust and Sand First
Edition
Environmental Testing - Part 2: Tests - Test Xb: Abrasion of
Markings and Letterings Caused by Rubbing of Fingers and Hands
First Edition
Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination
First Edition
Environmental Testing - Part 2: Tests - Test Te: Solderability Testing
of Electronic Components for Surface Mount Technology by the
Wetting Balance Method First Edition
Environmental Testing - Part 2: Tests - Test Eh: Hammer Tests First
Edition; Replaces 60068-2-62: 1991 and 60068-2-63: 1991
Environmental Testing - Part 2-77: Tests - Test 77: Body Strength
and Impact Shock First Edition
Environmental Testing - Part 2-78: Tests - Test 2-78: Body Cab:
Damp Heat, Steady State First Edition
Basic Environmental Testing Procedures Part 3: Background
Information Section One - Cold and Dry Heat Tests First Edition;
Supplement A-1978; Corrigenda-03/1980
Basic Environmental Testing Procedures Part 3: Background
Information Section Two-Combined Temperature/Low Air Pressure
Tests First Edition
Environmental Testing Part 3: Guidance Seismic Test Methods for
Equipments First Edition
Environmental Testing - Part 3-4: Supporting Documentation and
Guidance - Damp Heat Tests First Edition; Replaces and Cancels IEC
60068-2-28: 1990
Environmental Testing - Part 3-5: Supporting Documentation and
Guidance - Confirmation of the Performance of Temperature
Chambers First Edition; Should Be Read in Conjunction with IEC
60068-3-6 and IEC 60068-3-7
Environmental Testing - Part 3-6: Supporting Documentation and
Guidance - Confirmation of the Performance of
Temperature/Humidity Chambers First Edition; Should Be Read in
Conjunction with IEC 60068-3-5 and IEC 60068-3-7
Environmental Testing - Part 3-7: Supporting Documentation and
Guidance - Measurements in Temperature Chambers for Tests A and
B (with Load) First Edition; Should Be Read in Conjunction with
IEC 60068-3-5 and IEC 60068-3-6
Basic Environmental Testing Procedures Part 4: Information for
60068-5-1
60068-5-2
60071-1
60071-2
60072-1
60072-2
60072-3
60073
60076-1
60076-2
60076-3
60076-5
60076-8
60076-10
60077-1
60077-2
60078
60079-0
60079-4
60079-10
Specification Writers - Test Summaries First Edition; Amendment 11992; Amendment 2-1994
Environmental Testing Part 5: Guide to Drafting of Test Methods General Principles First Edition
Environmental Testing Part 5: Guide to Drafting of Test Methods Terms and Definitions First Edition
Insulation Co-Ordination Part 1: Definitions, Principles and Rules
Seventh Edition; Cancels and Replaces IEC 71-3: 1982
Insulation Co-Ordination - Part 2: Application Guide Third Edition
Dimensions and Output Series for Rotating Electrical Machines Part
1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080 Sixth
Edition; Incorporating Amendments 1 and 2
Dimensions and Output Series for Rotating Electrical Machines Part
2: Frame Numbers 355 to 1 000 and Flange Numbers 1 180 to 2 360
First Edition
Dimensions and Output Series for Rotating Electrical Machines - Part
3: Small Built-In Motors - Flange Numbers BF10 to BF50 First
Edition
Basic and Safety Principles for Man-Machine Interface, Marking and
Identification - Coding Principles for Indication Devices and
Actuators Fifth Edition
Power Transformers - Part 1: General Edition 2.1; Edition 2:1993
Consolidated with Amendment 1:1999
Power Transformers; Part 2: Temperature Rise Second Edition;
Corrigendum-1997
Power Transformers Part 3: Insulation Levels, Dielectric Tests and
External Clearances in Air Second Edition; Corrigendum 11-2000
Power Transformers Part 5: Ability to Withstand Short Circuit
Second Edition
Power Transformers - Application Guide First Edition; Replaces IEC
60606: 1978
Power Transformers - Part 10: Determination of Sound Levels First
Edition; Cancels and Replaces IEC 60551:1987
Railway Applications - Electric Equipment for Rolling Stock - Part 1:
General Service Conditions and General Rules First Edition
Railway Applications - Electric Equipment for Rolling Stock - Part 2:
Electrotechnical Components - General Rules First Edition
Characteristic Impedances and Dimensions of Radio-Frequency
Coaxial-Cables Third Edition
Electrical Apparatus for Explosive Gas Atmospheres - Part 0:
General Requirements Edition 3.1; Edition 3:1998 Consolidated with
Amendment 1:2000
Electrical Apparatus for Explosive Gas Atmospheres Part 4: Method
of Test for Ignition Temperature Second Edition; Supplement A1966; Amendment 1-1995
Electrical Apparatus for Explosive Gas Atmospheres Part 10:
60079-12
60079-13
60079-14
60079-16
60079-17
60079-19
60079-20
60081
TR 60083
60085
60086-1
60086-2
60086-4
60086-5
60092-101
60092-201
60092-202
60092-203
60092-204
Classification of Hazardous Areas Third Edition; Corrigendum-1996
Electrical Apparatus for Explosive Gas Atmospheres Part 12:
Classification of Mixtures of Gases or Vapours with Air According to
Their Maximum Experimental Safe Gaps and Minimum Igniting
Currents First Edition
Electrical Apparatus for Explosive Gas Atmospheres Part 13:
Construction and Use of Rooms or Buildings Protected by
Pressurization First Edition
Electrical Apparatus for Explosive Gas Atmospheres - Part 14:
Electrical Installations in Hazardous Areas (Other Than Mines)
Second Edition
Electrical Apparatus for Explosive Gas Atmospheres Part 16:
Artificial Ventilation for the Protection of Analyzer(s) Houses First
Edition
Electrical Apparatus for Explosive Gas Atmospheres - Part 17:
Inspection and Maintenance of Electrical Installations in Hazardous
Areas (Other Than Mines) Second Edition
Electrical Apparatus for Explosive Gas Atmospheres Part 19: Repair
and Overhaul for Apparatus Used in Explosive Atmospheres (Other
Than Mines or Explosives) First Edition
Electrical Apparatus for Explosive Gas Atmospheres - Part 20: Data
for Flammable Gases and Vapours, Relating to the Use of Electrical
Apparatus First Edition
Double-Capped Fluorescent Lamps - Performance Specifications
Fifth Edition; Amendment 1: 01/2000
Plugs and Socket-Outlets for Domestic and Similar General Use
Standardized in Member Countries of IEC Third Edition
Thermal Evaluation and Classification of Electrical Insulation Second
Edition
Primary Batteries - Part 1: General Ninth Edition
Primary Batteries - Part 2: Physical and Electrical Specifications
Tenth Edition; Amendment 1: 07-2001(ENGLISH ONLY)
Primary Batteries - Part 4: Safety Standard of Lithium Batteries
Second Edition
Primary Batteries - Part 5: Safety of Batteries with Aqueous
Electrolyte First Edition
Electrical Installations in Ships - Part 101: Definitions and General
Requirements Fourth Edition; (Amendment 1-1995) (Corrigendum1996)
Electrical Installations in Ships - Part 201: System Design - General
Fourth Edition
Electrical Installations in Ships - Part 202: System Design Protection Fourth Edition; (Amendment 1-1996)
Electrical Installations in Ships Part 203: System Design - Acoustic
and Optical Signals First Edition
Electrical Installations in Ships Part 204: System Design - Electric
60092-301
60092-302
60092-303
60092-304
60092-305
60092-306
60092-307
60092-350
60092-351
60092-352
60092-353
60092-354
60092-359
60092-373
60092-374
60092-375
60092-376
TR 60092-390
60092-401
and Electrohydraulic Steering Gear Third Edition
Electrical Installations in Ships Part 301: Equipment - Generators and
Motors Third Edition; (Amendment 1-1994) (Amendment 2-1995)
Electrical Installations in Ships - Part 302: Low-Voltage Switchgear
and Controlgear Assemblies Fourth Edition
Electrical Installations in Ships Part 303: Equipment - Transformers
for Power and Lighting Third Edition; Amendment 1- 1997
Electrical Installations in Ships Part 304: Equipment - Semiconductor
Convertors Third Edition; (Amendment 1-1995)
Electrical Installations in Ships Part 305: Equipment - Accumulator
(Storage) Batteries Third Edition; (Amendment 1-1989)
Electrical Installations in Ships Part 306: Equipment - Luminaires
and Accessories Third Edition
Electrical Installations in Ships Part 307: Equipment - Heating and
Cooking Appliances Third Edition
Electrical Installations in Ships - Part 350: Shipboard Power Cables General Construction and Test Requirements Second Edition
Electrical Installations in Ships - Part 351: Insulating Materials for
Shipboard and Mobile and Fixed Offshore Units, Power,
Telecommunication, and Control Data Cables Second Edition
Electrical Installations in Ships - Choice and Installation of Cables for
Low-Voltage Power Systems Second Edition; Amendment 1-1997
Electrical Installations in Ships - Part 353: Single and Multicore NonRadial Field Power Cables with Extruded Solid Insulation for Rated
Voltages 1 kV and 3 kV Second Edition; Amendment 1 04-2001
Electrical Installations in Ships - Part 354: Single- and Three-Core
Power Cables with Extruded Solid Insulation for Rated Voltages 6
kV, 10 kV and 15 kV First Edition
Electrical Installations in Ships - Part 359: Sheathing Materials for
Shipboard Power and Telecommunication Cables Edition 1.2: Edition
1: 1987 Consolidated with Amendments 1: 1994 and 2: 1999
Shipboard Telecommunication Cables and Radio-Frequency Cables
Shipboard Flexible Coaxial Cables First Edition
Shipboard Telecommunication Cables and Radio-Frequency Cables
Telephone Cables for Non-Essential Communication Services First
Edition
Shipboard Telecommunication Cables and Radio-Frequency Cables
General Instrumentation, Control and Communication Cables First
Edition
Electrical Installations in Ships Part 376: Shipboard Multicore Cables
for Control Circuits First Edition
Electrical Installations in Ships - Part 390: Cable Penetrations - Fire
Type Test Procedure First Edition
Electrical Installations in Ships - Part 401: Installation and Test of
Completed Installation Third Edition; Amendment 1-1987;
Amendment 2-1997
60092-501
60092-502
60092-503
60092-504
60092-505
60092-506
60092-507
60093
60094-1
60094-2
60094-3
60094-4
60094-5
60094-6
60094-7
60094-10
60094-11
60095-1
60095-2
Electrical Installations in Ships Part 501: Special Features - Electric
Propulsion Plant Third Edition
Electrical Installations in Ships - Part 502: Tankers - Special Features
Fifth Edition
Electrical Installations in Ships Special Features A.C. Supply
Systems with Voltages in the Range Above 1 kV up to and Including
11 kV First Edition
Electrical Installations in Ships - Part 504: Special Features - Control
and Instrumentation Third Edition
Electrical Installations in Ships Part 505: Special Features - Mobile
Offshore Drilling Units Third Edition; (Amendment 1-1993)
Electric Installations in Ships - Part 506: Special Features - Ships
Carrying Specific Dangerous Goods and Materials Hazardous Only in
Bulk First Edition
Electrical Installations in Ships - Part 507; Pleasure Craft First
Edition
Methods of Test for Volume Resistivity and Surface Resistivity of
Solid Electrical Insulating Materials Second Edition
Magnetic Tape Sound Recording and Reproducing Systems Part 1:
General Conditions and Requirements Fourth Edition; Amendment 11994
Magnetic Tape Recording and Reproducing Systems - Part 2:
Calibration Tapes Second Edition; Corrigendum-1995
Magnetic Tape Sound Recording and Reproducing Systems Part 3:
Methods of Measuring the Characteristics of Recording and
Reproducing Equipment for Sound on Magnetic Tape First Edition;
Amendment 2-1988; Amendment 3-1996
Magnetic Tape Sound Recording and Reproducing Systems Part 4:
Mechanical Magnetic Tape Properties First Edition; Amendment 11994
Magnetic Tape Sound Recording and Reproducing Systems Part 5:
Electrical Magnetic Tape Properties First Edition; Amendment 11996
Magnetic Tape Sound Recording and Reproducing Systems Part 6:
Reel-to-Reel Systems First Edition
Magnetic Tape Sound Recording and Reproducing Systems - Part 7:
Cassette for Commercial Tape Records and Domestic Use First
Edition; Amendment 1-1996
Magnetic Tape Sound Recording and Reproducing Systems Part 10:
Time and Address Codes First Edition
Magnetic Tape Sound Recording and Reproducing Systems Part 11:
Address Code for Compact Cassettes First Edition
Lead-Acid Starter Batteries - Part 1: General Requirements and
Methods of Test Sixth Edition
Lead-Acid Starter Batteries Part 2: Dimensions of Batteries and
Dimensions and Marking of Terminals Third Edition; Amendment 1-
60095-4
60096-0-1
60096-1
60096-2
60096-3
60096-4-1
60097
60098
60099-1
60099-3
60099-4
60099-5
60100
60104
60105
60107-1
60107-2
1991; Amendment 2-1993
Lead-Acid Starter Batteries Part 4: Dimensions of Batteries for
Heavy Trucks First Edition; Amendment 1-1996
Radio-Frequency Cables - Part 0: Guide to the Design of Detail
Specifications Section 1 - Coaxial Cables Edition 2.1; Edition 2: 1990
Consolidated with Amendment 1:2000
Radio-Frequency Cables Part 1: General Requirements and
Measuring Methods Fourth Edition; Amendment 2-1993,
Incorporating Amendment 1
Radio-Frequency Cables Part 2: Relevant Cable Specifications First
Edition; Consolidated Reprint Consisting of Publication 96-2 and
Supplements 96-2A: 1965, 96-2B: 1966, 96-2C: 1976, 96-2D: 1986;
Amendment 1-1990; Corrigendum-04 1993; Corrigendum
Radio-Frequency Cables Part 3: General Requirements and Tests for
Single-Unit Coaxial Cables for Use in Cabled Distribution Systems
First Edition
Radio-Frequency Cables Part 4: Specification for Superscreened
Cables Section 1 - General Requirements and Test Methods First
Edition
Grid System for Printed Circuits Fourth Edition
Analogue Audio Disk Records and Reproducing Equipment Third
Edition
Surge Arresters - Part 1: Non-Linear Resistor Type Gapped Surge
Arresters for a.c. Systems Edition 3.1; Edition 3: 1991 Consolidated
with Amendment 1: 1999
Surge Arresters Part 3: Artificial Pollution Testing of Surge Arresters
First Edition
Surge Arresters - Part 4: Metal-Oxide Surge Arresters without Gaps
for a.c. Systems Edition 1.2; Edition 1: 1991 Consolidated with
Amendment 1: 1998 AND 2: 2001
Surge Arresters - Part 5: Selection and Application Recommendations
Edition 1.1; Edition 1: 1996 Consolidated with Amendment 1: 1999
Methods for the Measurement of Direct Interelectrode Capacitances
of Electronic Tubes and Valves Second Edition; (Amendment 11969)
Aluminium-Magnesium-Silicon Alloy Wire for Overhead Line
Conductors Second Edition
Recommendation for Commercial-Purity Aluminium Busbar Material
First Edition
Methods of Measurement on Receivers for Television Broadcast
Transmissions - Part 1: General Considerations - Measurements at
Radio and Video Frequencies Third Edition
Methods of Measurement on Receivers for Television Broadcast
Transmissions - Part 2: Audio Channels - General Methods and
Methods for Monophonic Channels Second Edition; BS EN 60107-2:
1997
60107-3
60107-4
60107-5
60107-6
60107-7
60107-8
60110-1
TS 60110-2
60112
60114
60115-1
60115-2
60115-2-1
60115-2-2
60115-4
Recommended Methods of Measurement on Receivers for Television
Broadcast Transmissions - Part 3: Electrical Measurements on
Multichannel Sound Television Receivers Using Subcarrier Systems
Edition 1.1; Edition 1: 1988 Consolidated with Amendment 1: 1999
Recommended Methods of Measurement on Receivers for Television
Broadcast Transmissions - Part 4: Electrical Measurements on
Multichannel Sound Television Receivers Using the Two-Carrier
FM-System Edition 1.1; Edition 1: 1988 Consolidated with
Amendment 1:
Recommended Methods of Measurements on Receivers for
Television Broadcast Transmissions - Part 5: Electrical
Measurements on Multichannel Sound Television Receivers Using
the NICAM Two-Channel Digital Sound-System Edition 1.1; Edition
1:1992 Consolidated w
Recommended Methods of Measurement on Receivers for Television
Broadcast Transmissions Part 6: Measurement under Conditions
Different from Broadcast Signal Standards First Edition
Methods of Measurement on Receivers for Television - Part 7:
HDTV Displays First Edition
Recommended Methods of Measurement on Receivers for Television
Broadcast Transmissions - Part 8: Measurements on D2-MAC/Packet
Equipment First Edition
Power Capacitors for Induction Heating Installations - Part 1: General
First Edition
Power Capacitors for Induction Heating Installations - Part 2: Ageing
Test, Destruction Test and Requirements for Disconnecting Internal
Fuses First Edition
Method for Determining the Comparative and the Proof Tracking
Indices of Solid Insulating Materials under Moist Conditions Third
Edition
Recommendation for Heat-Treated Aluminium Alloy Busbar
Material of the Aluminium-Magnesium-Silicon Type First Edition;
Corrigendum
Fixed Resistors for Use in Electronic Equipment - Part 1: Generic
Specification Edition 3.1; Edition 3:1999 Consolidated with
Amendment 1:2001
Fixed Resistors for Use in Electronic Equipment Part 2: Sectional
Specification: Fixed Low-Power Non-Wirewound Resistors Second
Edition; IECQ QC 400100
Fixed Resistors for Use in Electronic Equipment Part 2: Blank Detail
Specification: Fixed Low-Power Non-Wirewound Resistors
Assessment Level E First Edition; (IECQ QC 400101)
Fixed Resistors for Use in Electronic Equipment Part 2: Blank Detail
Specification: Fixed Low-Power Non-Wirewound Resistors
Assessment Level F First Edition; (IECQ QC 400102)
Fixed Resistors for Use in Electronic Equipment Part 4: Sectional
60115-4-1
60115-4-2
60115-4-3
60115-4-101
60115-4-102
60115-5
60115-5-1
60115-5-2
60115-5-101
60115-6
60115-6-1
60115-6-2
60115-8
Specification: Fixed Power Resistors Second Edition; (Amendment
1-1993) (IECQ QC 400200)
Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail
Specification: Fixed Power Resistors Assessment Level E First
Edition; (Amendment 1-1993) (IECQ QC 400201)
Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail
Specification: Fixed Power Resistors Assessment Level F First
Edition; (IECQ QC 400202)
Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail
Specification: Fixed Power Resistors, Heat-Sink Types Assessment
Level H First Edition; IECQ QC 400203
Fixed Resistors for Use in Electronic Equipment Part 4: Detail
Specification: Fixed Power Wirewound Resistors with Solderable
Axial Wire Leads - Stability Class 5 % - Assessment Level E First
Edition; (IECQ QC 400201XX0001)
Fixed Resistors for Use in Electronic Equipment Part 4: Detail
Specification: Fixed Power Wirewound Resistors with Solderable
Axial Wire Leads - Stability Class 1 % - Assessment Level E First
Edition; (IECQ QC 400201XX0002)
Fixed Resistors for Use in Electronic Equipment Part 5: Sectional
Specification: Fixed Precision Resistors Second Edition; (IECQ QC
400300)
Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail
Specification: Fixed Precision Resistors Assessment Level E First
Edition; (IECQ QC 400301)
Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail
Specification: Fixed Precision Resistors Assessment Level F First
Edition; (IECQ QC 400302)
Fixed Resistors for Use in Electronic Equipment Part 5: Detail
Specification: Fixed Precision Wirewound Resistors with Solderable
Axial Wire Leads - Stability Class 0,1% - Assessment Level E First
Edition; (IECQ QC 400301XX0001)
Fixed Resistors for Use in Electronic Equipment Part 6: Sectional
Specification: Fixed Resistor Networks with Individually Measurable
Resistors First Edition; (Amendment 1-1987) (IECQ QC 400400)
Fixed Resistors for Use in Electronic Equipment Part 6: Blank Detail
Specification: Fixed Resistor Networks with Individually Measurable
Resistors, All of Equal Value and Equal Dissipation Assessment
Level E First Edition; (IECQ QC 400401)
Fixed Resistors for Use in Electronic Equipment Part 6: Blank Detail
Specification: Fixed Resistor Networks with Individually Measurable
Resistors, of Either Different Resistance Values or Different Rated
Dissipations Assessment Level E First Edition
Fixed Resistors for Use in Electronic Equipment Part 8: Sectional
Specification: Fixed Chip Resistors First Edition; IECQ QC 400600;
Amendment 1: 07/2000
60115-8-1
60118-0
60115-6-101
60115-6-102
60115-7
60115-7-1
60118-1
60118-2
60118-3
60118-4
60118-5
60118-6
60118-7
60118-8
60118-9
60118-10
60118-11
60118-12
Fixed Resistors for Use in Electronic Equipment Part 8: Blank Detail
Specification: Fixed Chip Resistors. Assessment Level E First
Edition; IECQ QC 400601
Hearing Aids Part 0: Measurement of Electroacoustical
Characteristics Second Edition; Amendment 1-1994
Fixed Resistors for Use in Electronic Equipment Part 6: Detail
Specification: Fixed Thick Film Resistor Networks with Individually
Measurable Resistors, All of Equal Value and Equal Dissipation,
Class 1 (Dual-In-Line Network) First Edition
Fixed Resistors for Use in Electronic Equipment Part 6: Detail
Specification: Fixed Thick Film Resistor Networks with Individually
Measurable Resistors, All of Equal Value and Equal Dissipation,
Class 1 (Single-In-Line Network) First Edition
Fixed Resistors for Use in Electronic Equipment Part 7: Sectional
Specification: Fixed Resistor Networks in Which Not All Resistors
Are Individually Measurable First Edition; (IECQ QC 400500)
Fixed Resistors for Use in Electronic Equipment Part 7: Blank Detail
Specification: Fixed Resistor Networks in Which Not All Resistors
Are Individually Measurable Assessment Level E First Edition;
(IECQ QC 400501)
Hearing Aids - Part 1: Hearing Aids with Induction Pick-Up Coil
Input Third Edition; Amendment 1- 1998
Hearing Aids Part 2: Hearing Aids with Automatic Gain Control
Circuits Second Edition; Amendment 1 02-1993; Amendment 2 051997
Hearing Aids Part 3: Hearing Aid Equipment Not Entirely Worn on
the Listener Second Edition
Hearing Aids - Part 4: Magnetic Field Strength in Audio-Frequency
Induction Loops for Hearing Aid Purposes First Edition; Amendment
1-1998
Hearing Aids Part 5: Nipples for Insert Earphones First Edition
Hearing Aids - Part 6: Characteristics of Electrical Input Circuits for
Hearing Aids Second Edition
Hearing Aids Part 7: Measurement of the Performance Characteristics
of Hearing Aids for Quality Inspection for Delivery Purposes First
Edition; Amendment 1-1994
Hearing Aids Part 8: Methods of Measurement of Performance
Characteristics of Hearing Aids Under Simulated In Situ Working
Conditions First Edition
Hearing Aids Part 9: Methods of Measurement of Characteristics of
Hearing Aids with Bone Vibrator Output First Edition
Hearing Aids Part 10: Guide to Hearing Aid Standards First Edition
Hearing Aids Part 11: Symbols and Other Markings on Hearing Aids
and Related Equipment First Edition; Replaces 60224: 1966
Hearing Aids - Part 12: Dimensions of Electrical Connector Systems
First Edition; Cancels and Replaces IEC 90: 1973
60118-13
60118-14
60119
60120
60121
60122-2
60122-3
60126
60122-2-1
60127-1
60127-2
60127-3
60127-4
60268-2
60268-3
60268-4
60268-5
60268-6
60268-7
60268-8
60268-9
Hearing Aids - Part 13: Electromagnetic Compatibility (EMC) First
Edition
Hearing Aids - Part 14: Specification of a Digital Interface Device
First Edition
Recommendations for Polycrystalline Semiconductor Rectifier Stacks
and Equipments First Edition
Dimensions of Ball and Socket Couplings of String Insulator Units
Third Edition; Corrigendum-05/1989
Recommendation for Commercial Annealed Aluminium Electrical
Conductor Wire First Edition
Quartz Crystal Units for Frequency Control and Selection Part 2:
Guide to the Use of Quartz Crystal Units for Frequency Control and
Selection Second Edition
Quartz Crystal Units of Assessed Quality - Part 3: Standard Outlines
and Lead Connections Third Edition
IEC Reference Coupler for the Measurement of Hearing Aids Using
Earphones Coupled to the Ear by Means of Ear Inserts Second
Edition
Quartz Crystal Units for Frequency Control and Selection Part 2:
Guide to the Use of Quartz Crystal Units for Frequency Control and
Selection - Section One: Quartz Crystal Units for Microprocessor
Clock Supply First Edition; (Amendment 1-1994)
Miniature Fuses - Part 1: Definitions for Miniature Fuses and General
Requirements for Miniature Fuse-Links Edition 1.1; Edition 1: 1988
Consolidated with Amendment 1: 1999
Miniature Fuses Part 2: Cartridge Fuse-Links First Edition;
Amendment 1-1995; Amendment 2-2000; CENELEC EN 60 127-2:
1991
Miniature Fuses Part 3: Sub-Miniature Fuse-Links Second Edition;
Amendment 1-1991; Corrigendum-10/1994; Corrigendum-06/1996
Miniature Fuses - Part 4: Universal Modular Fuse-Links (UMF)
Second Edition
Sound System Equipment Part 2: Explanation of General Terms and
Calculation Methods Second Edition; Amendment 1-1991
Sound System Equipment - Part 3: Amplifiers Third Edition
Sound System Equipment - Part 4: Microphones Second Edition; BS
6840-4: 1997
Sound-System Equipment Part 5: Loudspeakers Second Edition;
Amendment 1-04/1993; Amendment 2-07/1996
Sound System Equipment Part 6: Auxiliary Passive Elements First
Edition
Sound System Equipment - Part 7: Headphones and Earphones
Second Edition
Sound System Equipment Part 8: Automatic Gain Control Devices
First Edition
Sound System Equipment Part 9: Artificial Reverberation, Time
60268-10
60268-11
60268-12
TR 60268-13
60268-14
60317-11
60317-12
60317-13
60317-14
60317-15
60317-16
60350
TR 60349-3
60351-1
60351-2
60352-1
60352-2
Delay and Frequency Shift Equipment First Edition
Sound System Equipment Part 10: Peak Programme Level Meters
Second Edition
Sound System Equipment Part 11: Application of Connectors for the
Interconnection of Sound System Components Second Edition;
Amendment 1-1989; Amendment 2-1991
Sound System Equipment Part 12: Application of Connectors for
Broadcast and Similar Use Second Edition; Amendment 1-1991;
Amendment 2-1994
Sound System Equipment - Part 13: Listening Tests on Loudspeakers
Second Edition
Sound System Equipment Part 14: Circular and Elliptical
Loudspeakers; Outer Frame Diameters and Mounting Dimensions
Second Edition
Specifications for Particular Types of Winding Wires Part 11:
Bunched Solderable Polyurethane Enamelled Round Copper Wires,
Class 130, with Silk Covering Third Edition
Specifications for Particular Types of Winding Wires Part 12:
Polyvinyl Acetal Enamelled Round Copper Wire, Class 120 Second
Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires - Part 13:
Polyester or Polyesterimide Overcoated with Polyamide-Imide
Enamelled Round Copper Wire, Class 200 Edition 2.2; Edition 2:
1990 Consolidated with Amendments 1: 1997 and 2: 1997
Specifications for Particular Types of Winding Wires Part 14:
Polyvinyl Acetal Enamelled Round Aluminium Wire, Class 105
Second Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 15:
Polyesterimide Enamelled Round Aluminium Wire, Class 180
Second Edition; Amendment 1-1997
Specifications for Particular Types of Winding Wires Part 16:
Polyester Enamelled Rectangular Copper Wire, Class 155 Second
Edition; Amendment 1-1997
Electric Cooking Ranges, Hobs, Ovens and Grills for Household Use
- Methods for Measuring Performance Second Edition
Electric Traction - Rotating Electrical Machines for Rail and Road
Vehicles - Part 3: Determination of the Total Losses of ConvertorFed Alternating Current Motors by Summation of the Component
Losses First Edition
Expression of the Properties of Cathode-Ray Oscilloscopes Part 1:
General First Edition
Expression of the Properties of Cathode-Ray Oscilloscopes Part 2:
Storage Oscilloscopes First Edition
Solderless Connections - Part 1: Wrapped Connections - General
Requirements, Test Methods and Practical Guidance Third Edition
Solderless Connections Part 2: Solderless Crimped Connections -
60352-3
60377-1
60377-2
60379
60410
60411-2
60412
60413
60417-1
60127-5
60127-6
60129
60130-2
60130-3
60130-4
60130-5
60130-6
60130-7
60130-8
60130-9
General Requirements, Test Methods and Practical Guidance First
Edition; Amendment 1-1996
Solderless Connections Part 3: Solderless Accessible Insulation
Displacement Connections - General Requirements, Test Methods
and Practical Guidance First Edition; Corrigendum-1995
Recommended Methods for the Determination of the Dielectric
Properties of Insulating Materials at Frequencies Above 300 MHz
Part 1: General First Edition
Methods for the Determination of the Dielectric Properties of
Insulating Materials at Frequencies Above 300 MHz Part 2:
Resonance Methods First Edition
Methods for Measuring the Performance of Electric Storage WaterHeaters for Household Purposes Third Edition
Sampling Plans and Procedures for Inspection by Attributes First
Edition; Corrigenda-1976
Power Convertors for Electric Traction Part 2: Additional Technical
Information First Edition
Standard Dimensions of Scintillators First Edition
Test Procedures for Determining Physical Properties of Brush
Materials for Electrical Machines First Edition
Graphical Symbols for Use on Equipment - Part 1: Overview and
Application Second Edition
Miniature Fuses Part 5: Guidelines for Quality Assessment of
Miniature Fuse-Links First Edition
Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge FuseLinks First Edition; Amendment 1-1996; Replaces 60257: 1968
Alternating Current Disconnectors and Earthing Switches Third
Edition; Amendment 1-1993; Amendment 2-1996
Connectors for Frequencies Below 3 MHz Part 2: Connectors for
Radio Receivers and Associated Sound Equipment Second Edition;
(Amendment 1-1969)
Connectors for Frequencies Below 3 MHz (Mc/s) Part 3: Battery
Connectors First Edition; Corrigendum-01/1993
Connectors for Frequencies Below 3 MHz Part 4: Circular Multipole
Connectors with Threaded Coupling First Edition; Supplement A1970
Connectors for Frequencies Below 3 MHz (Mc/s) Part 5: Rectangular
Multipole Connectors with Blade Contacts First Edition
Connectors for Frequencies Below 3 MHz (Mc/s) Part 6: Rectangular
Miniature Multipole Connectors with Blade Contacts First Edition
Connectors for Frequencies Below 3 MHz Part 7: Circular Multipole
Connectors with Bayonet or Push-Pull Coupling First Edition
Connectors for Frequencies Below 3 MHz Part 8: Concentric
Connectors for Audio Circuits in Radio Receivers Second Edition
Connectors for Frequencies Below 3 MHz Part 9: Circular
Connectors for Radio and Associated Sound Equipment Third
60130-10
60130-12
60130-16
60130-17
60133
60134
60135
60136
60137
60139
60141-1
60141-2
60141-3
60141-4
60143
60143-2
60143-3
60145
Edition
Connectors for Frequencies Below 3 MHz Part 10: Connectors for
Coupling an External Low-Voltage Power Supply to Portable
Entertainment Equipment First Edition
Connectors for Frequencies Below 3 MHz Part 12: Link and Test
Connectors Second Edition
Connectors for Frequencies Below 3 MHz Part 16: Printed Circuit
Board Mounted Connectors with Two Rows of Staggered Contacts
and Terminations with Spacing of 2.54 mm (0.1 in) First Edition
Connectors for Frequencies Below 3 MHz - Part 17: Detail
Specification for Interconnection Devices Which Prmit MultiDirectional Mating, for Use with Rechargeble Batteries First Edition
Dimensions of Pot-Cores Made of Magnetic Oxides and Associated
Parts Fourth Edition
Rating Systems for Electronic Tubes and Valves and Analogous
Semiconductor Devices First Edition
Numbering of Electrodes and Designation of Units in Electronic
Tubes and Valves First Edition
Dimensions of Brushes and Brush-Holders for Electrical Machinery
Second Edition; Amendment 1-1995; Replaces IEC 60467: 1974
Insulated Bushings for Alternating Voltages Above 1000 V Fourth
Edition; Corrigendum-03/1996
Preparation of Outline Drawings for Cathode-Ray Tubes, Their
Components, Connections and Gauges Second Edition
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 1: Oil-Filled, Paper-Insulated, Metal Sheathed Cables and
Accessories for Alternating Voltages up to and Including 400 kV
Third Edition; Amendment 1-1995; Amendment 2-1998
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories
Part 2: Internal Gas- Pressure Cables and Accessories for Alternating
Voltages up to 275 kV First Edition; (Amendment 1-1967)
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories
Part 3: External Gas- Pressure (Gas Compression) Cables and
Accessories for Alternating Voltages up to 275 kV First Edition;
(Amendment 1-1967)
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories
Part 4: Oil-Impregnated Paper-Insulated High Pressure Oil-Filled
Pipe-Type Cables and Accessories for Alternating Voltages up to and
Including 400 kV First Edition; (Amendment 1-1990)
Series Capacitors for Power Systems Third Edition; Corrigendum01/1994
Series Capacitors for Power Systems - Part 2: Protective Equipment
for Series Capacitor Banks First Edition
Series Capacitors for Power Systems - Part 3: Internal Fuses First
Edition
Var-Hour (Reactive Energy) Meters First Edition
60146-1-1
60146-1-2
60146-1-3
60146-2
60146-6
60151-0
60151-1
60151-2
60151-3
60151-4
60151-5
60151-6
60151-7
60151-8
60151-9
60151-10
60151-11
Semiconductor Convertors - General Requirements and Line
Commutated Convertors Part 1-1: Specifications of Basic
Requirements Third Edition; Corrigendum-08/1993; Amendment 11996
Semiconductor Convertors General Requirements and Line
Commutated Convertors Part 1-2: Application Guide Third Edition
Semiconductor Convertors General Requirements and Line
Commutated Convertors Part 1-3: Transformers and Reactors Third
Edition
Semiconductor Converters - Part 2: Self-Commutated Semiconductor
Converters Including Direct d.c. Converters Second Edition
Semiconductor Convertors Part 6: Application Guide for the
Protection of Semiconductor Convertors Against Overcurrent by
Fuses First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 0: Precautions Relating to Methods of Measurement of
Electronic Tubes and Valves First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 1: Measurement of Electrode Current First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 2: Measurement of Heater or Filament Current First
Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 3: Measurement of Equivalent Input and Output
Admittances First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 4: Methods of Measuring Noise Factor First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 5: Methods of Measuring Hiss and Hum First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 6: Methods of Application of Mechanical Shock
(Impulse) Excitation to Electronic Tubes and Valves First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 7: Measurement of Equivalent Noise Resistance First
Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 8: Measurement of Cathode Heating Time and Heater
Warm-Up Time First Edition; Corrigendum-07/1967
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 9: Methods of Measuring the Cathode-Interface
Impedance First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 10: Methods of Measurement of Audio-Frequency
Output Power and Distortion First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 11: Methods of Measurement of Radio-Frequency Output
60151-12
60151-13
60151-14
60151-15
60151-16
60151-17
60151-19
60151-20
60151-22
60151-18
60151-21
60151-23
60151-24
60151-25
60151-26
Power First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 12: Methods of Measuring Electrode Resistance,
Transconductance, Amplification Factor, Conversion Resistance and
Conversion Transconductance First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 13: Methods of Measurement of Emission Current from
Hot Cathodes for High-Vacuum Electronic Tubes and Valves First
Edition First Edition
Measurements of the Electrical Properties of Electronic Tubes Part
14: Methods of Measurement of Radar and Oscilloscope CathodeRay Tubes Second Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 15: Methods of Measurement of Spurious and Unwanted
Electrode Currents First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 16: Methods of Measurement for Television Picture
Tubes First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 17: Methods of Measurement of Gasfilled Tubes and
Valves Second Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 19: Methods of Measurement on Corona Stabilizers First
Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 20: Methods of Measurement of Thyratron Pulse
Modulators First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 22: Methods of Measurement for Cold Cathode Counting
and Indicator Tubes First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 18: Methods of Measurement of Noises Due to
Mechanical or Acoustic Excitations First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 21: Methods of Measurement of Cross-Modulation in
Electronic Tubes and Valves First Edition
Measurements of the Electrical Properties of Electronic Tubes and
Valves Part 23: Methods of Measurement of Vacuum Pulse
Modulator Tubes and Valves First Edition
Measurements of the Electrical Properties of Electronic Tubes Part
24: Methods of Measurement of Cathode-Ray Charge-Storage Tubes
First Edition
Measurements of the Electrical Properties of Electronic Tubes Part
25: Methods of Measurement of Geiger-Muller Counter Tubes First
Edition
Measurements of the Electrical Properties of Electronic Tubes Part
60151-27
14844
14845
14846
14863
14882
14888-1
14888-2
14957
14977
DIS 14980
14888-3
15026
15041
TR 15044
15049
15050
26: Methods of Measurement for Camera Tubes First Edition
Measurements of the Electrical Properties of Electronic Tubes Part
27: Methods of Measurement for Intermodulation Products in
Transmitting Tubes First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not
Disturb Override Supplementary Services First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Intrusion Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Intrusion Supplementary
Service First Edition
Information Technology - System-Independent Data Format (SIDF)
First Edition
Programming Languages - C++ First Edition
Information Technology - Security Techniques - Digital Signatures
with Appendix - Part 1: General First Edition; Corrected and
Reprinted 12/15/1999
Information Technology - Security Techniques - Digital Signatures
with Appendix - Part 2: Identity-Based Mechanisms First Edition
Information Technology - Notation of Format for Data Element
Values First Edition
Information Technology - Syntactic Metalanguage - Extended BNF
First Edition
(Draft)Information Technology - Code of Practice for Information
Security Management
Information Technology - Security Techniques - Digital Signatures
with Appendix - Part 3: Certificate-Based Mechanisms First Edition;
Corrected and Reprinted 12/15/1999; Corrigendum 1: 9/15/2001
Information Technology - System and Software Integrity Levels First
Edition
Information Technology - Data Interchange on 90 mm Optical Disk
Cartridges - Capacity: 640 Mbytes per Cartridge First Edition
Information Technology - Terminology for the Home Electronic
System (HES) First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Advice of
Charge Supplementary Services First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Advice of Charge
15051
15052
15053
15054
15055
15056
DIS 15057
TR 15067-2
TR 15067-3
TR 15067-4
15068-2
DIS 15068-3
ISP 15121-1
ISP 15121-2
Supplementary Services
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Recall
Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Recall Supplementary Service
First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Interception Additional Network Feature First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Interception Additional
Network Feature First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Transit
Counter Additional Network Feature First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Transit Counter Additional
Network Feature First Edition
(Draft)Information Technology - Microprocessor Systems Futurebus+ - Physical Layer and Profile Specification
Information Technology - Home Electronic Systems (HES)
Application Model - Part 2: Lighting Model for HES First Edition
Information Technology - Home Electronic Systems (HES)
Application Model - Part 3: Model of an Energy Management System
for HES First Edition
Information Technology - Home Electronic Systems (HES)
Application Model - Part 4: Security System for HES First Edition
Information Technology - Portable Operating System Interface
(POSIX) System Administration - Part 2: Software Administration
First Edition; ANSI/IEEE Std 1387.2
(Draft)Information Technology - Portable Operating System Interface
(POSIX) System Administration - Part 3: User and Group Account
Administration
Information Technology - International Standardized Profile AOD1n
- Interactive Manipulation of ODA Documents - Part 1: AOD11 DTAM/Read Only First Edition
Information Technology - International Standardized Profile AOD1n
- Interactive Manipulation of ODA Documents - Part 2: AOD12 DTAM/Insert First Edition
DISP 15122-1
ISP 15122-2
DISP 15123-1
DISP 15123-2
DISP 15123-3
DISP 15123-4
DISP 15123-5
ISP 15124-1
ISP 15125-4
ISP 15125-7
ISP 15125-10
ISP 15125-12
ISP 15126-1
(Draft)Information Technology - International Standardized Profiles AOM3nn - OSI Management - Lower Layer Systems and Network
Management Ensemble - Part 1: AOM311 - Lower Layer Systems
and Network Management Ensemble for TA/RA/RD Profiles ***CDROM ONLY*
Information Technology - International Standardized Profiles
AOM3nn - OSI Management - Part 2: AOM312 - Lower Layer
Systems and Network Management Ensemble for
TB/TC/TD/TE/RB/RC Profiles First Edition
(Draft)Information Technology - International Standardized Profile OSI Management - Common Management Information for Lower
Layer Profiles - Part 1: Transport Layer Management Information
***CD-ROM ONLY***
(Draft)Information Technology - International Standardized Profile OSI Management - Common Management Information for Lower
Layer Profiles - Part 2: Network Layer Management Information
***CD-ROM ONLY***
(Draft)Information Technology - International Standardized Profile OSI Management - Common Management Information for Lower
Layer Profiles - Part 3: IS-IS Intra-Domain Routeing Protocol
Management Information ***CD-ROM ONLY***
(Draft)Information Technology - International Standardized Profile OSI Management - Common Management Information for Lower
Layer Profiles - Part 4: Inter-Domain Routeing Protocol Management
Information ***CD-ROM ONLY***
(Draft)Information Technology - International Standardized Profile OSI Management - Common Management Information for Lower
Layer Profiles - Part 5: Data Link Layer Management Information
***CD-ROM ONLY***
Information Technology - International Standardized Profile FOD126
- Open Document Format: Image Applications - Enhanced Document
Structure - Character, Raster Graphics, and Geometric Graphics
Content Architecture - Part 1: Document Application Profile (DA
Information Technology - International Standardized Profiles ADYnn
- OSI Directory - Part 4: ADY22 - DSA Support of Distributed
Operations First Edition
Information Technology - International Standardized Profiles ADYnn
- OSI Directory - Part 7: ADY43 - DSA to DSA Authentication First
Edition
Information Technology - International Standardized Profiles ADYnn
- OSI Directory - Part 10: ADY51 - Shadowing Using ROSE First
Edition
Information Technology - International Standardized Profiles ADYnn
- OSI Directory - Part 12: ADY53 - Shadowing Subsets First Edition
Information Technology - International Standardized Profiles FDY1n
- Directory Data Definitions - Part 1: FDY11 - Common Directory
ISP 15126-2
15145
15200
15205
TR 15271
TR 15285
15404
DISP 15127-1
DISP 15128-1
15408-1
15408-2
15408-3
TR 15410
15411
15412
TR 15413
15416
15417
Use (Normal) First Edition
Information Technology - International Standardized Profiles FDY1n
- Directory Data Definitions - Part 2: FDY12 - Directory System
Schema First Edition
Information Technology - Programming Languages - Forth First
Edition
Information Technology - Adaptive Lossless Data Compression
Algorithm (ALDC) First Edition
SBus - Chip and Module Interconnect Bus First Edition; IEEE Std
1496
Information Technology - Guide for ISO/IEC 12207 (Software Life
Cycle Processes) First Edition
Information Technology - An Operational Model for Characters and
Glyphs First Edition
Information Technology - Office Machines - Minimum Information
to be Included in Specification Sheets - Facsimile Equipment First
Edition
(Draft)Information Technology - International Standardized Profiles
MED1n-C - Medical Image Interchange Profiles - Simple Point-to
Point Image Transfer - Part 1: MED11-C (AFT11-C) File Transfer of
Unstructured Binary Data
(Draft)Information Technology - International Standardized Profiles
MED2n-C - Medical Image Interchange Profiles - Store-and-Forward
Image Transfer - Part 1: MED222-C (AMH21-C, AMH22-C,
AMH23-C, AMH24-C) Interpersonal Messaging - Externally
Defined Body Pa
Information Technology - Security Techniques - Evaluation Criteria
for IT Security - Part 1: Introduction and General Model First Edition
Information Technology - Security Techniques - Evaluation Criteria
for IT Security - Part 2: Security Functional Requirements First
Edition
Information Technology - Security Techniques - Evaluation Criteria
for IT Security - Part 3: Security Assurance Requirements First
Edition
Information Technology - Telecommunications and Information
Exchange between Systems - PISN Mobility-General Principles and
Services Aspects First Edition
Information Technology - Segmented Keyboard Layouts First Edition
Information Technology - Portable Computer Keyboard Layouts First
Edition; Corrected and Reprinted 09/15/2000
Information Technology - Font Services - Abstract Service Definition
First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Print Quality Test Specification - Linear
Symbols First Edition
Information Technology - Automatic Identification and Data Capture
15418
15419
15420
15421
15423-1
15424
15426-1
15428
15434
15437
15438
15429
15430
15431
15432
Techniques - Bar Code Symbology Specification - Code 128 First
Editon
Information Technology - EAN/UCC Application Identifiers and Fact
Data Identifiers and Maintenance First Edition
(Draft)Information Technology - Automatic Identification and Data
Capture Techniques - Bar Code Digital Imaging and Printing
Performance Testing First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Symbology Specification - EAN/UPC First
Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Master Test Specifications First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Scanner and Decoder Performance Testing Part 1: Linear Symbols First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Data Carrier Identifiers (Including Symbology
Identifiers) First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Verifier Conformance Specifications - Part 1:
Linear Symbols First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless
Terminal Location Registration Supplementary Service and Wireless
Information Technology - Transfer Syntax for High Capacity ADC
Media First Edition
Information Technology - Enhancements to LOTOS (E-LOTOS)
First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Symbology Specifications - PDF417 First
Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Location
Registration Supplementary Service and Wireless Terminal
Informatio
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless
Terminal Call Handling Additional Network Features First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Call
Handling Additional Network Features First Edition
Information Technology - Telecommunications and Information
15433
15445
TR 15452
15457-1
15457-2
15459-1
15459-2
FDIS 15474-1
15485
15486
15498
TR 15504-1
TR 15504-2
TR 15504-3
TR 15504-4
TR 15504-5
TR 15504-6
TR 15504-7
15505
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless
Terminal Authentication Supplementary Services (WTAT and
WTAN) Fir
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal
Authentication Supplementary Services First Edition
Information Technology - Document Description and Processing
Languages - HyperText Markup Language (HTML) First Editon
Information Technology - Specification of Data Value Domains First
Edition
Identification Cards - Thin Flexible Cards - Part 1: Physical
Characteristics First Edition
Identification Cards - Thin Flexible Cards - Part 2: Magnetic
Recording Techniques First Edition
Information Technology - Unique Identification of Transport Units Part 1: General First Edition
Information Technology - Unique Identification of Transport Units Part 2: Registration Procedures First Edition
Information Technology - CDIF Framework - Part 1: Overview
Information Technology - Data Interchange on 120 mm Optical Disk
Cartridges Using Phase Change PD Format - Capacity: 650 Mbytes
per Cartridge First Edition
Information Technology - Data Interchange on 130 mm Optical Disk
Cartridges of Type WORM (Write Once Read Many) Using
Irreversible Effects - Capacity: 2,6 Gbytes per Cartridge First Edition
Information Technology - Data Interchange on 90 mm Optical Disk
Cartridges - HS-1 Format - Capacity: 650 Mbytes per Cartridge First
Edition
Information Technology - Software Process Assessment - Part 1:
Concepts and Introductory Guide First Edition
Information Technology - Software Process Assessment - Part 2: A
Reference Model for Processes and Process Capability First Edition
Information Technology - Software Process Assessment - Part 3:
Performing an Assessment First Edition
Information Technology - Software Process Assessment - Part 4:
Guide to Performing Assessments First Edition
Information Technology - Software Process Assessment - Part 5: An
Assessment Model and Indicator Guidance First Edition
Information Technology - Software Process Assessment - Part 6:
Guide to Competency of Assessors First Edition
Information Technology - Software Process Assessment - Part 7:
Guide for Use in Process Improvement First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network
15506
15507
15521
TR 15580
TR 15581
15693-1
15693-2
15693-3
15718
15731
15757
DIS 15763
15771
15772
15773
(PISN) - Specification, Functional Model and Information Flows Message Waiting Indication Supplementary Service Second Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network
(PISN) - Inter-Exchange Signalling Protocol - Message Waiting
Indication Supplementary Service Second Edition; Technical
Corrigendum
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - PINX Clock Synchroization
First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Informatation Interchange - Helical Scan Recording - DDS-3
Format Using 125 m Length Tapes First Edition
Information Technology - Programming Languages - Fortran Floating-Point Exception Handling Second Edition
Information Technology - Programming Languages - Fortran Enhanced Data Type Facilities Second Edition
Identification Cards - Contactless Integrated Circuit(s) Cards Vicinity Cards - Part 1: Physical Characteristics First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards Vicinity Cards - Part 2: Air Interface and Initialization First Edition;
Corrigendum 1: 10/15/2001
Identification Cards - Contactless Integrated Circuit(s) Cards Vicinity Cards - Part 3: Anticollision and Transmission Protocol First
Edition
Information Technology - Data Interchange on 8 mm Wide Magnetic
Tape Cartridge - Helical Scan Recording - HH-1 Format First Edition
Information Technology - 12,65 mm Wide Magnetic Tape Cassette
for Information Interchange - Helical Scan Recording - DTF-1
Format First Edition
Information Technology - Data Interchange on 8 mm Wide Magnetic
Tape Cartridge - Helical Scan Recording - DA-2 Format First Edition
(Draft)Road Vehicles - Alarm Systems for Commercial Vehicles
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Common
Information Additional Network Feature First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Common Information
Additional Network Feature First Edition; Technical Corrigendum 1:
12/15/20
Information Technology - Telecommunications and Information
Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Transit Counter
15775
DIS 15776
15780
DIS 15842
TR 15846
15802-1
15802-2
15802-3
15802-4
15802-5
15851
15852
DIS 15879
15895
15896
15897
15898
Additional Network Feature First Edition
Information Technology - Office Machines - Method of Specifying
Image Reproduction of Colour Copying Machines by Analog Test
Charts - Realisation and Application First Edition
(Draft)Information Technology - VME64
Information Technology - 8 mm Wide Magnetic Tape Cartridge Helical Scan Recording - AIT-1 Format First Edition
(Draft)Information Technology - SCSI-2 Common Access - Method
Transport and SCSI Interface Module
Information Technology - Software Life Cycle Processes Configuration Management First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Local and Metropolitan Area Networks
- Common Specifications - Part 1: Medium Access Control (MAC)
Service Definition First Edition; Replaces ISO 10039
Information Technology - Telecommunications and Information
Exchange Between Systems - Local and Metropolitan Area Networks
- Common Specifications - Part 2: LAN/MAN Management First
Edition; (ANSI/IEEE 802.1B)
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Common Specifications - Part 3: Media Access Control (MAC)
Bridges First Edition; ANSI/IEEE Std 802.1D
Information Technology - Telecommunications and Information
Exchange Between Systems - Local and Metropolitan Area Networks
- Common Specifications - Part 4: System Load Protocol First
Edition; (ANSI/IEEE 802.1E)
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Common Specifications - Part 5: Remote Media Access Control
(MAC) Bridging First Edition; ANSI/IEEE Std 802.1G
Information Technology - Communication Protocol - Open MUMPS
Interconnect First Edition
Information Technology - Programming Languages - M Windowing
API First Edition
(Draft)Information Technology - Systems Management - Distributed
Software Administration - DCE-RPC Interoperability (XDSA-DCE)
Information Technology - Data Interchange on 12,7 mm 128-Track
Magnetic Tape Cartridges - DLT 3-XT Format First Edition
Information Technology - Data Interchange on 12,7 mm 208-Track
Magnetic Tape Cartridges - DLT 5 Format First Edition
Information Technology - Procedures for Registration of Cultural
Elements First Edition
Information Technology - Data Interchange on 356 mm Optical Disk
Cartridges - WORM, Using Phase Change Technology - Capacity:
14,8 Gbytes and 25 Gbytes per Cartridge First Edition
15899
15910
DIS 15917
DIS 15918
TR 15942
15953
16022
16023
16262
TR 16326
16382
15954
15955
15991
15992
16388
16390
Information Technology - Telecommunications and Information
Exchange between Systems - Broadband Private Integrated Services
Network - Service Description - Broadband Connection Oriented
Bearer Services First Edition
Information Technology - Software User Documentation Process
First Edition
(Draft)Information Technology - High-Performance Parallel Interface
- Serial Specification (HIPPI-Serial)
(Draft)Information Technology - High-Performance Parallel Interface
- Mapping to Asynchronous Transfer Mode (HIPPI-ATM)
Information Technology - Programming Languages - Guide for the
Use of the Ada Programming Language in High Integrity Systems
First Edition
Information Technology - Open Systems Interconnection - Service
Definition for the Application Service Object Association Control
Service Element First Edition
Information Technology - International Symbology Specification Data Matrix First Edition
Information Technology - International Symbology Specification MaxiCode First Edition
Information Technology - ECMAScript Language Specification First
Edition
Software Engineering - Guide for the Application of ISO/IEC 12207
to Project Management First Edition
Information Technology - Data Interchange on 12,7 mm 208-Track
Magnetic Tape Cartridges - DLT 6 Format First Edition
Information Technology - Open Systems Interconnection Connection-Mode Protocol for the Application Service Object
Association Control Service Element First Edition; Replaces ISO/IEC
8650-1
Information Technology - Open Systems Interconnection Connectionless Protocol for the Application Service Object
Association Control Service Element First Edition; Replaces ISO/IEC
10035-1: 1995
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Priority Interruption and Call Priority Interruption Protection Supple
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Priority Interruption and
Call Priority Interruption Protection Supplementary Services Fi
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Symbology Specifications - Code 39 First
Edition
Information Technology - Automatic Identification and Data Capture
16448
16449
16485
16500-1
16500-2
16500-3
16500-4
TR 17010
17020
17025
17309
17310
17462
17799
17913
18004
17311
Techniques - Bar Code Symbology Specifications - Interleaved 2 of 5
First Edition
Information Technology - 120 mm DVD - Read-Only Disk First
Edition
Information Technology - 80 mm DVD - Read-Only Disk First
Edition
Information Technology - Mixed Raster Content (MRC) First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 1: System Reference Models and Scenarios First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 2: System Dynamics, Scenarios and Protocol Requirements First
Edition
Information Technology - Generic Digital Audio-Visual Systems Part 3: Contours: Technology Domain First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 4: Lower-Layer Protocols and Physical Interfaces First Edition
General Requirements for Bodies Providing Accreditation of
Inspection Bodies First Edition
General Criteria for the Operation of Various Types of Bodies
Performing Inspection First Edition
General Requirements for the Competence of Testing and Calibration
Laboratories First Edition; Cancels and Replaces ISO/IEC Guide 25:
1990
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of a Circuit Mode Basic
Service and the Supplementary Service User-to-User Signalling as a
Pai
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of 64 kbit/s Circuit Mode
Connections with 16 kbit/s Sub-Multiplexing First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - DDS-4
Format First Edition
Information Technology - Code of Practice For Information Security
Management First Edition
Information Technology - 12,7 mm 128-Track Magnetic Tape
Cartridge for Information Interchange - Parallel Serpentine Format
First Edition
Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Symbology - QR Code First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of 64 kbit/s Circuit Mode
Connections with 8 kbit/s Sub-Multiplexing First Edition
17875
17876
17877
17878
18009
18017
18051
18052
TR 18053
18093
DIS 18353
DIS 18354
DIS 18355
18809
18810
Information Technology - Telecommunications and Information
between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Private
User Mobility (PUM) - Registration Supplementary Service First
Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Private User Mobility (PUM) Registration Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Private
User Mobility (PUM) - Call Handling Additional Network Features
Fir
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Service Network Inter-Exchange Signalling Protocol - Private User Mobility (PUM) Call Handling Additional Network Features First Edition
Information Technology - Programming Languages - Ada:
Conformity Assessment of a Language Processor First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Mapping Functions for the Employment of Virtual Private Network
Scenarios First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Services for Computer Supported
Telecommunications Applications (CSTA) Phase III First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Protocol for Computer Supported
Telecommunications Applications (CSTA) Phase III First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Glossary of Definitions and
Terminology for Computer Supported Telecommunications
Applications (CSTA) Phase III Fisrt Edition
Informational Technology - Data Interchange on 130 mm Optical
Disk Cartridges of Type WORM (Write Once Read Many) Using
Irreversible Effects - Capacity: 5,2 Gbytes per Cartridge First Edition
(Draft)Information Technology - Intelligent Peripheral Interface
(Draft)Information Technology - High-Performance Parallel Interface
- Physical Switch Control (HIPPI-SC)
(Draft)Information Technology - High-Performance Parallel Interface
- Framing Protocol (HIPPI-FP)
Information Technology - 8mm Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan Recording AIT-1 with MIC
Format First Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge for
18836
20060
20061
19058
19459
19460
20161
20162
20563
DIS 20968
21407
21408
21410
Information Interchange - Helical Scan Recording AIT-2 with Mic
Format First Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan Recording - Mammoth Tape2 Format First Edition
Information Technology - Open Terminal Architecture (OTA)
Specification - Virtual Machine Specification First Edition
Information Technology - 12,65 mm Wide Magnetic Tape Cassette
for Information Interchange - Helical Scan Recording - DTF-2 First
Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Generic Functional
Protocol First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Single Step
Call Transfer Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Single Step Call Transfer
Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Use of QSIG at the C Reference Point between a PINX and an
Interconnecting Network First Edition
Information Technology - Data Interchange on 300 mm Optical Disk
Cartridges of Type WORM (Write Once Read Many) Using
Irreversible Effects - Capacity: 30 Gbytes Per Cartridge First Edition
Information Technology - 80 mm (1,23 Gbytes Per Side) and 120
mm (3,95 Gbytes Per Side) DVD-Recordable Disk (DVD-R) First
Edition
Information Technology - Software Engineering - Mk II Function
Point Analysis - Counting Practices Manual
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Simple
Dialog Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Simple Dialog Supplementary
Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Corporate Telecommunication
Networks - Signalling Interworking between QSIG and H.323 - Call
Transfer Supplementary Services First Edition
21888
21889
DIS 22050
DIS 22051
DIS 22091
DIS 22092
60027-1
60027-2
60027-3
60034-1
60034-2
60034-3
60034-4
60034-5
60034-6
60034-7
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Identification and Call Linkage Additional Network Feature First
Editi
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Service Network Inter-Exchange Signalling Protocol - Call Identification and Call
Linkage Additional Network Feature First Edition
(Draft)Information Technology - Data Interchange on 12,7 mm, 384Track Magnetic Tape Cartridges - Ultrium-1 Format 2001
(Draft)Information Technology - Data Interchange on 12,7 mm, 448Track Magnetic Tape Cartridges - SDLT1 Format 2001
(Draft)Information Technology - Streaming Lossless Data
Compression Algorithm (SLDC) 2001
(Draft)Information Technology - Data Interchange on 130 mm
Magneto-Optical Disk Cartridges - Capacity: 9,1 Gbytes Per
Cartridge 2001
Letter Symbols to Be Used in Electrical Technology Part 1: General
Sixth Edition; Corrected and Reprinted 03-31-1995
Letter Symbols to Be Used in Electrical Technology - Part 2:
Telecommunications and Electronics Second Edition
Letter Symbols to Be Used in Electrical Technology - Part 3:
Logarithmic Quantities and Units Second Edition; Amendment 1:
03/2000
Rotating Electrical Machines - Part 1: Rating and Performance Editon
10.2; Edition 10: 1996 Consolidated with Amendments 1:1997 and 2
1999
Rotating Electrical Machines Part 2: Methods for Determining Losses
and Efficiency of Rotating Electrical Machinery from Tests
(Excluding Machines for Traction Vehicles) Measurement of Losses
by the Calorimetric Method First Edition; Supplement A-1974; Ame
Rotating Electrical Machines Part 3: Specific Requirements for
Turbine-Type Synchronous Machines Fourth Edition; Corrigendum1997
Rotating Electrical Machines Part 4: Methods for Determining
Synchronous Machine Quantities from Tests Second Edition;
Amendment 1-1995
Rotating Electrical Machines - Part 5: Degrees of Protection Provided
by the Integral Design of Rotating Electrical Machines (IP Code) Classification Fourth Edition; Corrigendum 1: June 2001
Rotating Electrical Machines Part 6: Methods of Cooling (IC Code)
Second Edition
Rotating Electrical Machines - Part 7: Classification of Types of
Construction, Mounting Arrangements and Terminal Box Position
(IM Code) Edition 2.1; Edition 2:1992 Consolidated with
60034-8
60034-9
60034-10
60034-11
60034-12
60034-14
60034-15
60034-16-1
60034-16-2
TR 60034-16-3
TR 60034-17
60034-18-1
60034-19
60034-22
60034-18-21
60034-18-22
Amendment 1:2000
Rotating Electrical Machines Part 8: Terminal Markings and
Direction of Rotation of Rotating Machines First Edition;
Amendment 1-1990; Amendment 2-1996
Rotating Electrical Machines - Part 9: Noise Limits Third Edition
Rotating Electrical Machines Part 10: Conventions for Description of
Synchronous Machines First Edition
Rotating Electrical Machines Part 11: Built-In Thermal Protection
Chapter 1: Rules for Protection of Rotating Electrical Machines First
Edition
Rotating Electrical Machines - Part 12: Starting Performance of
Single-Speed Three-Phase Cage Induction Motors for Voltages up to
and Including 660 V First Edition; Amendment 1-1992; Amendment
2-1995
Rotating Electrical Machines - Part 14: Mechanical Vibration of
Certain Machines with Shaft Heights 56 mm and Higher Measurement, Evaluation and Limits of Vibration Second Edition
Rotating Electrical Machines Part 15: Impulse Voltage Withstand
Levels of Rotating A.C. Machines with Form-Wound Stator Coils
Second Edition
Rotating Electrical Machines Part 16: Excitation Systems for
Synchronous Machines Chapter 1: Definitions First Edition;
Corrigendum-1992
Rotating Electrical Machines Part 16: Excitation Systems for
Synchronous Machines Chapter 2: Models for Power System Studies
First Edition
Rotating Electrical Machines - Part 16: Excitation Systems for
Synchronous Machines - Section 3: Dynamic Performance First
Edition
Rotating Electrical Machines - Part 17: Cage Induction Motors When
Fed from Converters - Application Guide Second Edition
Functional Evaluation of Insulation Systems for Rotating Electrical
Machines Part 1: General Guidelines First Edition; Corrigendum1992; Amendment 1-1996
Rotating Electrical Machines - Part 19: Specific Test Methods for
D.C. Machines on Conventional and Rectifier-Fed Supplies First
Edition
Rotating Electrical Machines - Part 22: AC Generators for
Reciprocating Internal Combustion (RIC) Engine Driven Generating
Sets First Edition
Rotating Electrical Machines Part 18: Functional Evaluation of
Insulation Systems Section 21: Test Procedures for Wire-Wound
Windings - Thermal Evaluation and Classification First Edition;
Amendment 1-1994; Amendment 2-1996
Rotating Electrical Machines - Part 18-22: Functional Evaluation of
Insulation Systems - Test Procedures for Wire-Wound Windings -
60034-18-31
TR 60034-18-32
TR 60034-18-33
TS 60034-18-34
60038
60041
60044-1
60044-2
60044-3
60044-6
60044-7
60045-1
60050-101
60050-121
60050-151
60050-191
60050-195
Classification of Changes and Insulation Component Substitutions
Second Edition
Rotating Electrical Machines Part 18: Functional Evaluation of
Insulation Systems Section 31: Test Procedures for Form-Wound
Windings - Thermal Evaluation and Classification of Insulation
Systems Used in Machines up to and Including 50 mVA and 15 kV
First
Rotating Electrical Machines - Part 18: Functional Evaluation of
Insulation Systems - Section 32: Test Procedures for Form-Wound
Windings - Electrical Evaluation of Insulation Systems Used in
Machines up to and Including 50 MVA and 15 kV First Edition
Rotating Electrical Machines - Part 18: Functional Evaluation of
Insulation Systems - Section 33: Test Procedures for Form-Wound
Windings - Multifactor Functional Evaluation - Endurance under
Combined Thermal and Electrical Stresses of Insulation Systems U
Rotating Electrical Machines - Part 18-34: Functional Evaluation of
Insulation Systems - Test Procedures for Form-Wound Windings Evaluation of Thermomechanical Endurance of Insulation Systems
First Edition
IEC Standard Voltages Sixth Edition; Amendment 1-1994;
Amendment 2-1997
Field Acceptance Tests to Determine the Hydraulic Performance of
Hydraulic Turbines, Storage Pumps and Pump-Turbines Third
Edition; Corrigendum-1996; Replaces IEC 60198: 1966 and IEC
60607: 1978
Instrument Transformers - Part 1: Current Transformers First Edition;
Cancels and Replaces IEC 60185: 1987; Amendment 1: 07/2000
Instrument Transformers - Part 2: Inductive Voltage Transformers
Edition 1.1
Instrument Transformers Part 3: Combined Transformers First
Edition
Instrument Transformers Part 6: Requirements for Protective Current
Transformers for Transient Performance First Edition
Instrument Transformers - Part 7: Electronic Voltage Transformers
First Edition
Steam Turbines Part 1: Specifications First Edition
International Electrotechnical Vocabulary Part 101: Mathematics
Second Edition
International Electrotechnical Vocabulary - Part 121:
Electromagnetism Second Edition
International Electrotechnical Vocabulary Part 151: Electrical and
Magnetic Devices Second Edition
International Electrotechnical Vocabulary - Chapter 191:
Dependability and Quality of Service First Edition; Amendment 1:
03-1999
International Electrotechnical Vocabulary - Part 195: Earthing and
60050-221
60050-351
60050-393
60050-394
60050-415
60050-441
60050-442
60050-461
60050-551
60050-651
60050-713
60050-723
60050-807
60050-815
60050-821
60050-826
60050-891
60050 CHAP 00
Protection Against Electric Shock First Edition; Amendment 1: 12001
International Electrotechnical Vocabulary - Chapter 221: Magnetic
Materials and Components First Edition; Amendment 1: 01-1993;
Amendment 2: 04-1999
International Electrotechnical Vocabulary - Part 351: Automatic
Control Second Edition; Corrigendum:07-1999
International Electrotechnical Vocabulary Chapter 393: Nuclear
Instrumentation: Physical Phenomena and Basic Concepts First
Edition; Replaces 50(391):1975 and 50(392) 1976: Amendement 1
08 2000
International Electrotechnical Vocabulary Chapter 394: Nuclear
Instrumentation: Instruments First Edition; Amendment 1- 04 1996;
Amendment 2-07 2000
International Electrotechnical Vocabulary - Part 415: Wind Turbine
Generator Systems
International Electrotechnical Vocabulary Chapter 441: Switchgear,
Controlgear and Fuses Second Edition; Amendment 1: 07/2000
International Electrotechnical Vocabulary Part 442: Electrical
Accessories First Edition
International Electrotechnical Vocabulary - Chapter 461: Electric
Cables Amendment 1: 09-1993; Amendment 2: 04-1999
International Electrotechnical Vocabulary Part 551: Power
Electronics Second Edition
International Electrotechnical Vocabulary - Part 651: Live Working
First Edition
International Electrotechnical Vocabulary - Part 713:
Radiocommunications: Transmitters, Receivers, Networks and
Operation First Edition
International Electrotechnical Vocabulary - Chapter 723:
Broadcasting: Sound, Television, Data First Edition; Amendment 1:
05-1999
International Electrotechnical Vocabulary - Part 807: Digital
Recording of Audio and Video Signals First Edition
International Electotechnical Vocabulary - Part 815:
Superconductivity First Edition
International Electrotechnical Vocabulary Part 821: Signalling and
Security Apparatus for Railways Prepared by Joint IEC/UIC Working
Group; Cancels and Replaces IEC 60050-31: 1959
International Electrotechnical Vocabulary - Chapter 826: Electrical
Installations of Buildings First Edition; Amendment 1: 07-1990;
Amendment 2: 04-1995; Amendment 3: 04-1999
International Electrotechnical Vocabulary Part 891: Electrobiology
First Edition
(Withdrawn)General Index of the International Electrotechnical
Vocabulary Second Edition
60050 CHAP
111
60050 CHAP
131
60050 CHAP
161
60050 CHAP
212
60050 CHAP
321
60050 CHAP
371
60050 CHAP
411
60050 CHAP
421
60050 CHAP
426
60050 CHAP
436
60050 CHAP
446
60050 CHAP
448
60050 CHAP
466
60050 CHAP
471
60050 CHAP
481
60050 CHAP
486
60050 CHAP
521
60050 CHAP
531
60050 CHAP
541
60050 CHAP
561
60050 CHAP
581
International Electrotechnical Vocabulary Chapter 111: Physics and
Chemistry Second Edition; Supersedes IEC 50 Chap 111-01: 1982,
50 Chap 111-02: 1984 and 50 Chap 111-03: 1977
International Electrotechnical Vocabulary Chapter 131: Electric and
Magnetic Circuits Supplement A-1982; Amendment 1-1984
International Electrotechnical Vocabulary Chapter 161:
Electromagnetic Compatibility First Edition; Amendment 1-1997;
Amendment 2-1998
International Electrotechnical Vocabulary Chapter 212: Insulating
Solids, Liquids and Gases First Edition
International Electrotechnical Vocabulary Chapter 321: Instrument
Transformers
International Electrotechnical Vocabulary Chapter 371: Telecontrol
Amendment 1-1997
International Electrotechnical Vocabulary Chapter 411: Rotating
Machines Second Edition
International Electrotechnical Vocabulary Chapter 421: Power
Transformers and Reactors First Edition
International Electrotechnical Vocabulary Chapter 426: Electrical
Apparatus for Explosive Atmospheres First Edition
International Electrotechnical Vocabulary Chapter 436: Power
Capacitors First Edition
International Electrotechnical Vocabulary Chapter 446: Electrical
Relays
International Electrotechnical Vocabulary Chapter 448: Power
System Protection Second Edition
International Electrotechnical Vocabulary Chapter 466: Overhead
Lines First Edition
International Electrotechnical Vocabulary Chapter 471: Insulators
International Electrotechnical Vocabulary Chapter 481: Primary Cells
and Batteries First Edition
International Electrotechnical Vocabulary Chapter 486: Secondary
Cells and Batteries First Edition
International Electrotechnical Vocabulary Chapter 521:
Semiconductor Devices and Integrated Circuits
International Electrotechnical Vocabulary Chapter 531: Electronic
Tubes First Edition
International Electrotechnical Vocabulary Chapter 541: Printed
Circuits First Edition
International Electrotechnical Vocabulary; Chapter 561: Piezoelectric
Devices for Frequency Control and Selection; Section 561-07:
Characteristics of Surface Acoustic Wave (Saw) Devices First
Edition; Amendment 1-1995; Amendment 2-1997
International Electrotechnical Vocabulary - Chapter 581:
Electromechanical Components for Electronic Equipment
60050 CHAP
601
60050 CHAP
602
60050 CHAP
603
60050 CHAP
604
60050 CHAP
605
60050 CHAP
691
60050 CHAP
701
60050 CHAP
702
60050 CHAP
704
60050 CHAP
705
60050 CHAP
712
60050 CHAP
714
60050 CHAP
715
60050 CHAP
716-1
60050 CHAP
721
60050 CHAP
722
60050 CHAP
725
60050 CHAP
726
60050 CHAP
731
60050 CHAP
Amendment 1 1998
International Electrotechnical Vocabulary - Chapter 601: Generation,
Transmission and Distribution of Electricity - General Amendment 1
1998
International Electrotechnical Vocabulary Chapter 602: Generation,
Transmission and Distribution of Electricity - Generation
International Electrotechnical Vocabulary Chapter 603: Generation,
Transmission and Distribution of Electricity - Power System
Planning and Management Amendment- 1998
International Electrotechnical Vocabulary - Chapter 604: Generation,
Transmission and Distribution of Electricity - Operation First
Edition; Corrigendum- 1987; Amendment 1- 1998
International Electrotechnical Vocabulary Chapter 605: Generation,
Transmission and Distribution of Electricity - Substations
International Electrotechnical Vocabulary Chapter 691: Tariffs for
Electricity First Edition
International Electrotechnical Vocabulary Chapter 701:
Telecommunications, Channels and Networks
International Electrotechnical Vocabulary Chapter 702: Oscillations,
Signals and Related Devices First Edition; Erratum 2-1994
International Electrotechnical Vocabulary Chapter 704: Transmission
First Edition
International Electrotechnical Vocabulary Chapter 705: Radio Wave
Propagation First Edition
International Electrotechnical Vocabulary Chapter 712: Antennas
First Edition
International Electrotechnical Vocabulary Chapter 714: Switching
and Signalling in Telecommunications First Edition
International Electrotechnical Vocabulary Chapter 715:
Telecommunication Networks, Teletraffic and Operation First
Edition
International Electrotechnical Vocabulary Chapter 716-1: Integrated
Services Digital Network (ISDN) Part 1: General Aspects First
Edition
International Electrotechnical Vocabulary Chapter 721: Telegraphy,
Facsimile and Data Communication First Edition
International Electrotechnical Vocabulary Chapter 722: Telephony
First Edition
International Electrotechnical Vocabulary Chapter 725: Space
Radiocommunications Second Edition
International Electrotechnical Vocabulary Chapter 726: Transmission
Lines and Waveguides
International Electrotechnical Vocabulary Chapter 731: Optical Fibre
Communication First Edition; Corrigendum 03/1992; Corrigendum
07/1992
International Electrotechnical Vocabulary Chapter 801: Acoustics
801
60050 CHAP
806
60050 CHAP
811
60050 CHAP
841
60050 CHAP
845
60050 CHAP
851
60050 CHAP
881
60051-1
60051-2
60051-3
60051-4
60051-5
60051-6
60051-7
60051-8
60052
60059
60060-1
11586-5
and Electroacoustics Second Edition
International Electrotechnical Vocabulary Chapter 806: Recording
and Reproduction of Audio and Video Second Edition
International Electrotechnical Vocabulary Chapter 811: Electric
Traction First Edition
International Electrotechnical Vocabulary Chapter 841: Industrial
Electroheating
International Electrotechnical Vocabulary Chapter 845: Lighting
International Electrotechnical Vocabulary Chapter 851: Electric
Welding First Edition
Advance Edition of the International Electrotechnical Vocabulary
Chapter 881: Radiology and Radiological Physics
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories - Part 1: Definitions and General Requirements
Common to All Parts Fifth Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 2: Special Requirements for Ammeters
and Voltmeters Fourth Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 3: Special Requirements for Wattmeters
and Varmeters Fourth Edition; Amendment 1-1994
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 4: Special Requirements for Frequency
Meters Fourth Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 5: Special Requirements for Phase Meters,
Power Factor Meters and Synchroscopes Fourth Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 6: Special Requirements for Ohmmeters
(Impedance Meters) and Conductance Meters Fourth Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 7: Special Requirements for MultiFunction Instruments Fourth Edition
Direct Acting Indicating Analogue Electrical Measuring Instruments
and Their Accessories Part 8: Special Requirements for Accessories
Fourth Edition
Recommendations for Voltage Measurement by Means of SphereGaps (One Sphere Earthed) Second Edition
IEC Standard Current Ratings Second Edition
High-Voltage Test Techniques Part 1: General Definitions and Test
Requirements Second Edition; Corrigendum-03/1990; Corrigendum03/1992
Information Technology - Open Systems Interconnection - Generic
Upper Layers Security: Security Exchange Service Element (SESE)
Protocol Implementation Conformance Statement (PICS) Proforma
11586-6
11587
11588-1
11588-3
11588-8
TR 11589
TR 11590
DIS 11685.2
11693
11694-1
11694-2
11694-3
11694-4
TR 11735
11756
11770-1
11770-2
11770-3
11801
First Edition
Information Technology - Open Systems Interconnection - Generic
Upper Layers Security: Protecting Transfer Syntax Protocol
Implementation Conformance Statement (PICS) Proforma First
Edition
Information Technology - Open Systems Interconnection Application Context for Systems Management with Transaction
Processing First Edition
Information Technology - Message Handling Systems (MHS)
Management - Part 1: Model and Architecture First Edition
Information Technology - Message Handling Systems (MHS)
Management: Logging Information First Edition
Information Technology - Message Handling Systems (MHS)
Management: Message Transfer Agent Management First Edition
Information Technology - Open Systems Interconnection - LOTOS
Description of the CCR Service First Edition
Information Technology - Open Systems Interconnection - LOTOS
Description of the CCR Protocol First Edition
(Draft)Information Technology - IEEE Trial-Use Standard
Specifications for Microprocessor Operating Systems Interfaces
(MOSI) ***CD-ROM ONLY***
Identification Cards - Optical Memory Cards - General
Characteristics Second Edition
Identification Cards - Optical Memory Cards - Linear Recording
Method - Part 1: Physical Characteristics Second Edition
Identification Cards - Optical Memory Cards - Linear Recording
Method - Part 2: Dimensions and Location of the Accessible Optical
Area Second Edition
Identification Cards - Optical Memory Cards - Linear Recording
Method - Part 3: Optical Properties and Characteristics Second
Edition
Identification Cards - Optical Memory Cards - Linear Recording
Method - Part 4: Logical Data Structures Second Edition
Information Technology - EXTensions for Real-Time Ada First
Edition
Information Technology - Programming Languages - M Second
Edition
Information Technology - Security Techniques - Key Management Part 1: Framework First Edition
Information Technology - Security Techniques - Key Management Part 2: Mechanisms Using Symmetric Techniques First Edition
Information Technology - Security Techniques - Key Management Part 3: Mechanisms Using Asymmetric Techniques First Edition
Information Technology - Generic Cabling for Customer Premises
Edition 1.2; Edition 1:1995 Consolidated with Amendments 1:1999
and 2:1999
TR 11802-1
12042
ISP 12059-6
DISP 12060-7
TR 11802-2
TR 11802-5
ISP 12059-0
ISP 12059-1
ISP 12059-2
ISP 12059-3
ISP 12059-4
ISP 12059-5
DISP 12059-7
DISP 12059-8
DISP 12059-9
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Technical Reports and Guidelines - Part 1: The Structure and
Coding of Logical Link Control Addresses in Local Area Networks
Secon
Information Technology - Data Compression for Information
Interchange - Binary Arithmetic Coding Algorithm First Edition
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 6: Log Control First Edition
(Draft)Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 7: AOM252n Metric Objects and Attributes
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Part 2: Standard Group MAC Addresses Fourth Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Local and Metropolitan Area Networks
- Technical Reports and Guidelines - Part 5: Media Access Control
(MAC) Bridging of Ethernet V2.0 in Local Area Networks First Editi
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 0: Common Definitions for Management Function Profiles First
Edition
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 1: Object Management First Edition
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 2: State Management First Edition
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 3: Attributes for Representing Relationships First Edition
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 4: Alarm Reporting First Edition
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 5: Event Report Management First Edition
(Draft)Information Technology - International Standardized Profiles OSI Management - Common Information for Management Functions
- Part 7: Security Alarm Reporting ***CD-ROM ONLY***
(Draft)Information Technology - International Standardized Profiles OSI Management - Common Information for Management Functions
- Part 8: Security Audit Trail ***CD-ROM ONLY***
(Draft)Information Technology - International Standardized Profiles -
DISP 12059- 11
ISP 12059- 13
ISP 12060-1
ISP 12060-2
DISP 12060-9
12089
12119
ISP 12060-8
ISP 12061-1
ISP 12061-2
ISP 12061-3
ISP 12061-4
ISP 12061-5
ISP 12061-6
OSI Management - Common Information for Management Functions
- Part 9: Objects and Attributes for Access Control
(Draft)Information Technology - International Standardized Profiles OSI Management - Common Information for Management Functions
- Part 11: Metric Objects and Attributes ***CD-ROM ONLY***
Information Technology - International Standardized Profiles - OSI
Management - Common Information for Management Functions Part 13: Summarization First Edition
Information Technology - International Standardized Profiles OSI
Management - Management Functions - Part 1: AOM211 - General
Management Capabilities First Edition
Information Technology - International Standardized Profiles OSI
Management - Management Functions - Part 2: AOM212 - Alarm
Reporting and State Management Capabilities First Edition
(Draft)Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 9: AOM2432n Access Control
Information Technology - Computer Graphics and Image Processing
- Encoding for the Image Interchange Facility (IIF) First Edition
Information Technology - Software Packages - Quality Requirements
and Testing First Edition; AS/NZS 4366: 1996
Information Technology - International Standardized Profiles - OSI
Management - Management Functions - Part 8: AOM253X Summarization Objects (Including Profiles AOM2531-AOM2539)
First Edition
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 1: Introduction to the Transaction Processing
Profiles First Edition
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 2: Support of OSI TP APDUs First Edition
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 3: Support of CCR APDUs First Edition
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 4: Support of Session, Presentation and ACSE
PDUs First Edition
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 5: Application Supported Transactions - Polarized
Control (ATP11) First Edition; CEN EN ISP 12061-5: 1996
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 6: Application Supported Transactions - Shared
ISP 12061-7
ISP 12061-8
ISP 12061-9
ISP 12061-10
FDISP 12062-1
ISP 12062-1
FDISP 12062-2
ISP 12063-1
ISP 12063-2
ISP 12062-2
FDISP 12062-3
ISP 12062-3
FDISP 12062-4
Control (ATP12) First Edition; CEN EN ISP 12061-6: 1996
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 7: Provider Supported Unchained Transactions Polarized Control (ATP21) First Edition; CEN EN ISP 12061-7:
1996
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 8: Provider Supported Unchained Transactions Shared Control (ATP22) First Edition; CEN EN ISP 12061-8: 1996
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 9: Provider Supported Chained Transactions Polarized Control (ATP31) First Edition; CEN EN ISP 12061-9:
1996
Information Technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction
Processing - Part 10: Provider Supported Chained Transactions Shared Control (ATP32) First Edition; CEN EN ISP 12061-10: 1996
(Draft)Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 1: IPM MHS Service Support
Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 1: IPM MHS Service Support Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 2: AMH21 - IPM Content
Information Technology - International Standardized Profiles
AMH3n - Message Handling Systems - EDI Messaging - Part 1:
EDIMG MHS Service Support Second Edition
Information Technology - International Standardized Profiles
AMH3n - Message Handling Systems - EDI Messaging - Part 2:
AMH31 - EDIMG Content Second Edition
Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 2: AMH21 - IPM Content Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 3: AMH22 - IPM Requirements for Message Tranfer (P1)
Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 3: AMH22 - IPM Requirements for Message Transfer (P1)
Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging -
ISP 12062-4
FDISP 12062-5
ISP 12062-5
FDISP 12062-6
ISP 12063-3
ISP 12063-4
ISP 12063-5
ISP 12064-1
ISP 12067-1
ISP 12067-2
ISP 12069-1
ISP 12072
TR 12075
Part 4: AMH23 and AMH25 - IPM Requirements for MTS Access
(P3) and MTS 94 Access (P3)
Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 4: AMH23 and AMH25 - IPM Requirements for MTS Access
(P3) Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 5: AMH24 - IPM Requirements for Enhanced MS Access (P7)
Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 5: AMH24 - IPM Requirements for Enhanced MS Access (P7)
Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH2n - Message Handling Systems - Interpersonal Messaging Part 6: AMH26 - IPM Requirements for Enhanced MS 94 Access
(P7)
Information Technology - International Standardized Profiles
AMH3n - Message Handling Systems - EDI Messaging - Part 3:
AMH32 - EDIMG Requirements for Message Transfer (P1) Second
Edition
Information Technology - International Standardized Profiles
AMH3n - Message Handling Systems - EDI Messaging - Part 4:
AMH33 and AMH35 - EDIMG Requirements for MTS Access (P3)
and MTS 94 Access (P3) Second Edition
Information Technology - International Standardized Profiles
AMH3n - Message Handling Systems - EDI Messaging - Part 5:
AMH34 - EDIMG Requirements for Enhanced MS Access (P7)
Second Edition
Information Technology - International Standardized Profile FOD112
- Open Document Format: Image Applications - Simple Document
Structure - Raster Graphics Content Architecture - Part 1: Document
Application Profile (DAP) First Edition
Information Technology - International Standardized Profile RB Relaying the Connection-Mode Network Service - Part 1:
Subnetwork-Independent Requirements First Edition
Information Technology - International Standardized Profile RB Relaying the Connection-Mode Network Service - Part 2: LAN
Subnetwork-Dependent Media-Independent Requirements First
Edition
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 1: Introduction to the
DFR ISP First Edition
Information Technology - International Standardized Profile FD15 Directory Data Definitions - VT Use of the Directory First Edition
Information Technology - Customer Premises Cabling - Planning and
ISP 12067-3
ISP 12067-4
ISP 12067-5
ISP 12068-1
ISP 12068-2
DISP 12067-4
DRAFT AMD 1
DISP 12067-5
DRAFT AMD 1
ISP 12069-2
ISP 12069-3
ISP 12069-4
ISP 12069-5
Installation Guide to Support ISO/IEC 8802-5 Token Ring Stations
First Edition
Information Technology - International Standardized Profile RB Relaying the Connection-Mode Network Service - Part 3: PSDN
Subnetwork-Dependent Media-Dependent Requirements for Vitual
Calls over a Permanent Access First Edition
Information Technology - International Standardized Profile RB Relaying the Connection-Mode Network Service - Part 4: Definition
of Profile RB51.1111, Relaying the Connection-Mode Network
Service Between CSMA/CD LAN Subnetworks and PSDNs Using
Virtual Ca
Information Technology - International Standardized Profile RB Relaying the Connection-Mode Network Service - Part 5: Definition
of Profile RB51.1121, Relaying the Connection-Mode Network
Service Between CSMA/CD LAN Subnetworks and PSDNs Using
Virtual Ca
Information Technology - International Standardized Profile FDI 4 Directory Data Definitions - Use of the Directory for OSI TP - Part 1:
FDI 41 - Basic Naming and Addressing First Edition
Information Technology - International Standardized Profile FDI 4 Directory Data Definitions - Use of the Directory for OSI TP - Part 2:
FDI 42 - Enhanced Naming and Addressing First Edition
(Draft)Information Technology - International Standardized Profile
RB - Relaying the Connection-Mode Network Service - Part 4:
Definition of Profile RB51.1111, Relaying the Connection-Mode
Network Service between CSMA/CD LAN Subnetworks and PSDNs
Using Vir
(Draft)Information Technology - International Standardized Profile
RB - Relaying the Connection-Mode Network Service - Part 5:
Definition of Profile RB51.1121, Relaying the Connection-Mode
Network Service between CSMA/CD LAN Subnetworks and PSDNs
Using Vir
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 2: Specification of
ROSE, RTSE, ACSE, Presentation and Session Protocols for Use by
DFR First Edition
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 3: ADF11 - Common
Document Filing and Retrieval - Read Only Profile First Edition
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 4: ADF12 - Common
Filing and Retrieval - Archiving Profile First Edition
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 5: ADF13 - Common
Filing and Retrieval - Document Store Manipulation Profile First
Edition
TR 12182
12207
12246
13211-2
13213
ISP 12069-6
ISP 12069-7
ISP 12070-1
ISP 12071-1
ISP 12071-2
ISP 12071-3
ISP 12071-4
12087-1
12087-2
12087-3
Information Technology - Categorization of Software First Edition
Information Technology - Software Life Cycle Processes First
Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge Dual
Azimuth Format for Information Interchange - Helical Scan
Recording First Edition
Information Technology - Programming Languages - Prolog - Part 2:
Modules First Edition
Information Technology - Microprocessor Systems - Control and
Status Registers (CSR) Architecture for Microcomputer Buses First
Edition; ANSI/IEEE 1212
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 6: ADF21 - Remote
Store Management - Simple Management Profile First Edition
Information Technology - International Standardized Profiles ADFnn
- Document Filing and Retrieval (DFR) - Part 7: ADF22 - Remote
Store Management - Full Management Profile First Edition
Information Technology - International Standardized Profiles
FCSnnn - Character Set 8-Bit Code Structure Based on ISO/IEC
2022 - Part 1: FCS111 - 2022 Option 1 First Edition; BS EN ISP
12070-1: 1997
Information Technology - International Standardized Profile FCGnnn - Computer Graphics Metafile Interchange Format - Part 1:
FCG11 - Basic Scientific and Technical Graphics (BST) First Edition
Information Technology - International Standardized Profile FCGnnn - Computer Graphics Metafile Interchange Format - Part 2:
FCG23 - Advanced Scientific and Technical Graphics (AST) First
Edition
Information Technology - International Standardized Profile FCGnnn - Computer Graphics Metafile Interchange Format - Part 3:
FCG32 - Basic Presentation and Visualization - Model Profile First
Edition
Information Technology - International Standardized Profile FCGnnn - Computer Graphics Metafile Interchange Format - Part 4:
FCG33 - Advanced Presentation and Visualization (APV) First
Edition
Information Technology - Computer Graphics and Image Processing
- Image Processing and Interchange (IPI) - Functional Specification Part 1: Common Architecture for Imaging First Edition
Information Technology - Computer Graphics and Image Processing
- Image Processing and Interchange (IPI) - Functional Specification Part 2: Programmer's Imaging Kernel System Application Program
Interface First Edition; Corrigendum 1 09-15-1997
Information Technology - Computer Graphics and Image Processing
- Image Processing and Interchange (IPI) - Functional Specification Part 3: Image Interchange Facility (IIF) First Edition; Amendment 1-
12087-5
12088-4
12247
12248
TR 12382
DIS 13208
DIS 13209
13211-1
13210
TR 13233
13235-1
13235-3
13236
13238-3
13239
13241
1996
Information Technology - Computer Graphics and Image Processing
- Image Processing and Interchange (IPI) - Functional Specification Part 5: Basic Image Interchange Format (BIIF) First Edition;
Technical Corrigendum 1:05/15/2001
Information Technology - Computer Graphics and Image Processing
- Image Processing and Interchange - Application Program Interface
Language Bindings - Part 4: C First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - DDS Format
Using 60 m and 90 m Length Tapes First Edition; Supersedes
ISO/IEC 10777: 1991
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - DATA/DATDC Format Using 60 m and 90 m Length Tapes First Edition
Permuted Index of the Vocabulary of Information Technology
Second Edition
(Draft)Information Technology - Text and Office Systems - Message
Handling Systems - Electronic Data Interchange Messaging System
***CD-ROM ONLY***
(Draft)Information Technology - Text and Office Systems - Message
Handling - Electronic Data Interchange Messaging Service ***CDROM ONLY***
Information Technology - Programming Languages - Prolog - Part 1:
General Core First Edition
Information Technology - Requirements and Guidelines for Test
Methods Specifications and Test Method Implementations for
Measuring Conformance to POSIX Standards Second Edition; IEEE
Std 2003
Information Technology - Interpretation of Accreditation
Requirements in ISO/IEC Guide 25 - Accreditation of Information
Technology and Telecommunications Testing Laboratories for
Software and Protocol Testing Services First Edition
Information Technology - Open Distributed Processing - Trading
Function: Specification First Edition
Information Technology - Open Distributed Processing - Trading
Function - Part 3: Provision of Trading Function Using OSI Directory
Service First Edition
Information Technology - Quality of Service: Framework First
Edition
Information Technology - Data Management - Part 3: IRDS
Export/Import Facility First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - High-Level Data Link Control (HDLC)
Procedures Second Edition
Information Technology - Telecommunications and Information
13242
TR 13243
13244
DIS 13245-1
13246
13247
13248-1
13248-2
13248-3
13249-1
13249-2
13249-3
13249-5
13248-4
13250
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Route Restriction Class
Additional Network Feature First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Route
Restriction Class Additional Network Feature First Edition
Information Technology - Quality of Service - Guide to Methods and
Mechanisms First Edition
Information Technology - Open Distributed Management
Architecture First Edition; Amendment 1: 09/01/1999; Support Using
Common Object Request Broker Architecture (CORBA)
(Draft)Information Technology - Framework: Formal Methods in
Conformance Testing
Information Technology - Telecommunications and Information
Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Signalling ATM
Adaptation Layer First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Basic
Call/Connection Control First Edition
Information Technology - Open Systems Interconnection - The
Directory: Protocol Implementation Conformance Statement (PICS)
Proforma for the Directory Access Protocol First Edition
Information Technology - Open Systems Interconnection - The
Directory: Protocol Implementation Conformance Statement (PICS)
Proforma for the Directory System Protocol First Edition
Information Technology - Open Systems Interconnection - The
Directory: Protocol Implementation Conformance Statement (PICS)
Proforma for the Directory Operational Binding Management
Protocol First Edition
Information Technology - Database Languages - SQL Multimedia
and Application Packages - Part 1: Framework First Edition
Information Technology - Database Languages - SQL Multimedia
and Application Packages - Part 2: Full-Text First Edition
Information Technology - Database Languages - SQL Multimedia
and Application Packages - Part 3: Spatial First Edition
Information Technology - Database Languages - SQL Multimedia
and Application Packages - Part 5: Still Image First Edition
Information Technology - Open Systems Interconnection - The
Directory: Protocol Implementation Conformance Statement (PICS)
Proforma for the Directory Information Shadowing Protocol First
Edition
Information Technology - SGML Applications - Topic Maps First
Edition
13252
TR 13335-1
TR 13335-2
TR 13335-3
TR 13335-4
TR 13335-5
13346-1
13346-2
13346-3
13346-4
13346-5
13403
13421
13422
13481
13490-1
13522-1
Information Technology - Enhanced Communications Transport
Service Definition First Edition; ITU-T Rec.X.605 1998; Replaces
ISO 8880-1 and 8000-3: 1990
Information Technology - Guidelines for the Management of IT
Security - Part 1: Concepts and Models for IT Security First Edition
Information Technology - Guidelines for the Management of IT
Security - Part 2: Managing and Planning IT Security First Edition
Information Technology - Guidelines for the Management of IT
Security - Part 3: Techniques for the Management of IT Security First
Edition
Information Technology - Guidelines for the Management of IT
Security - Part 4: Selection of Safeguards First Edition
Information Technology - Guidelines for the Management of IT
Security - Part 5: Management uidance on Network Security First
Edition
Information Technology - Volume and File Structure of Write-Once
and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 1: General First Edition
Information Technology - Volume and File Structure of Write-Once
and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 2: Volume and Boot Block
Recognition First Edition
Information Technology - Volume and File Structure of Write-Once
and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 3: Volume Structure Second Edition
Information Technology - Volume and File Structure of Write-Once
and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 4: File Structure Second Edition
Information Technology - Volume and File Structure of Write-Once
and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 5: Record Structure First Edition
Information Technology - Information Interchange on 300 mm
Optical Disk Cartridges of the Write Once, Read Multiple (WORM)
Type Using the CCS Method First Edition
Information Technology - Data Interchange on 12,7 mm, 48-Track
Magnetic Tape Cartridges - DLT 1 Format First Edition
Information Technology - Data Interchange on 90 mm Flexible Disk
Cartridges 10 MByte Capacity Using Sector Servo Tracking - ISO
Type 304 First Edition
Information Technology - Data Interchange on 130 mm Optical Disk
Cartridges - Capacity: 1 Gigabyte per Cartridge First Edition
Information Technology - Volume and File Structure of Read-Only
and Write-Once Compact Disk Media for Information Interchange Part 1: General First Edition
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 1: MHEG Object Representation - Base Notation
13522-3
13522-4
13522-6
13490-2
13522-5
13522-7
13522-8
TR 13532
13549
TR 13561
13575
TR 13594
13614
13642
DIS 13645
13650-1
13650-2
(ASN.1) First Edition
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 3: MHEG Script Interchange Representation First
Edition
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 4: MHEG Registration Procedure First Edition
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 6: Support for Enhanced Interactive Applications
First Edition
Information Technology - Volume and File Structure of Read-Only
and Write-Once Compact Disk Media for Information Interchange Part 2: Volume and File Structure First Edition
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 5: Support for Base-Level Interactive Applications
First Edition; Technical Corrigendum 1: 10-15-1999
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 7: Interoperability and Conformance Testing for
ISO/IEC 13522-5 First Edition
Information Technology - Coding of Multimedia and Hypermedia
Information - Part 8: XML Notation for ISO/IEC 13522-5 First
Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Protocol Combinations to Provide and
Support the OSI Network Service First Edition
Information Technology - Data Interchange on 130 mm Optical Disk
Cartridges - Capacity: 1,3 Gigabytes per Cartridge First Edition
Information Technology - Guidelines for Effective Use of Optical
Disk Cartridges Conforming to ISO/IEC 10090 First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - 50-Pole Interface Connector
Mateability Dimensions and Contact Number Assignments First
Edition
Information Technology - Lower Layers Security First Edition
Information Technology - Interchange on 300 mm Optical Disk
Cartridges of the Write Once, Read Multiple (WORM) Type Using
the SSF Method First Edition
Information Technology - Elements of Management Information
Related to the OSI Physical Layer Second Edition
(Draft)Information Technology - Guidelines for the Design of IRDS
Content Modules
Information Technology - Open Systems Interconnection Conformance Test Suite for the OSI TP Protocol - Part 1: Test Suite
Structure and Test Purposes First Edition
Information Technology - Open Systems Interconnection Conformance Test Suite for the OSI TP Protocol - Part 2: Test
Management Protocol Specification First Edition
13660
13673
13712-1
13712-2
13712-3
13714
13719-1
13719-2
13813
13814
13816
13817-1
13818-1
13818-2
13818-2 FDAM
1
13818-3
13818-4
Information Technology - Office Equipment - Measurement of Image
Quality Attributes for Hardcopy Output - Binary Monochrome Text
and Graphic Images First Edition
Information Technology - Document Processing and Related
Communication - Conformance Testing for Standard Generalized
Markup Language (SGML) Systems First Edition
Information Technology - Remote Operations: Concepts, Model and
Notation First Edition; (Corrigendum 1-1996) (Amendment 1-1996)
Information Technology - Remote Operations: OSI Realizations Remote Operations Service Element (ROSE) Service Definition First
Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996)
Information Technology - Remote Operations: OSI Realizations Remote Operations Service Element (ROSE) Protocol Specification
First Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996)
Information Technology - Document Processing and Related
Communication - User Interface to Telephone-Based Services Voice Messaging Applications First Edition
Information Technology - Portable Common Tool Environment
(PCTE) - Part 1: Abstract Specification Second Edition
Information Technology - Portable Common Tool Environment
(PCTE) - Part 2: C Programming Language Binding Second Edition
Information Technology - Programming Languages - Generic
Packages of Real and Complex Type Declarations and Basic
Operations for Ada (Including Vector and Matrix Types) First
Edition
Information Technology - Programming Languages - Generic
Package of Complex Elementary Functions for Ada First Edition
Information Technology - Programming Languages, Their
Environments and System Software Interfaces - Programming
Language ISLISP First Edition
Information Technology - Programming Languages, Their
Environments and System Software Interfaces - Vienna Development
Method - Specification Language - Part 1: Base Language First
Edition
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information: Systems Second Edition
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information: Video Second Edition
(Draft)Information Technology - Generic Coding of Moving Pictures
and Associated Audio Information: Video Amendment 1: Content
Description Data 2000
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 3: Audio First Edition
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 4: Conformance Testing First
Edition; Technical Corrigendum 2: 12/01/1998; Amendment 1:
TR 13818-5
13818-6
13818-7
13818-9
13818-10
TR 13841
13842
13863
13871
13886
13888-1
13864
13865
13869
06/15/1999; Corrected and Reprinted 04/01/2000; Amendment 2:
03/15/20
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 5: Software Simulation First
Edition; Amendment 1: Advanced Audio Coding (AAC): 07-01-1999
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 6: Extensions for DSM-CC First
Edition; Technical Corrigendum 1: 11-01-1999; Amendment 2: 0601-2000; Amendment 1: 10-15-2000; Amendment 3: 08-15-2001
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 7: Advanced Audio Coding
(AAC) First Edition; Technical Corrigendum 1: 12/01/1998
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 9: Extension for Real Time
Interface for Systems Decoders First Edition
Information Technology - Generic Coding of Moving Pictures and
Associated Audio Information - Part 10: Conformance Extensions for
Digital Storage Media Command and Control (DSM-CC) First
Edition
Information Technology - Guidance on Measurement Techniques for
90 mm Optical Disk Cartridges First Edition
Information Technology - 130 mm Optical Disk Cartridges for
Information Interchange - Capacity: 2 Gbytes Per Cartridge First
Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Path
Replacement Additional Network Feature Second Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Telecommunications Networks
- Digital Channel Aggregation First Edition
Information Technology - Language-Independent Procedure Calling
(LIPC) First Edition
Information Technology - Security Techniques - Non-Repudiation Part 1: General First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Name
Identification Supplementary Services First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Transfer Supplementary Services First Edition; ETSI PRETS 300
260: 199
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network -
13870
13872
13873
13874
13888-2
13888-3
13923
13962
13963
14102
14136
14143-1
DIS 14165-111
14165-131
14165-141
DIS 14165-211
Inter-Exchange Signalling Protocol - Call Transfer Supplementary
Service First Edition; Technical Corrigendum 1: 12-01-1999
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Completion Supplementary
Services Second Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Diversion Supplementary Services First Edition; AS/NZS 4341(INT):
1995
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Diversion Supplementary
Services First Edition; Technical Corrigendum 1: 12-01-1999
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Path Replacement Additional
Network Feature Second Edition
Information Technology - Security Techniques - Non-Repudiation Part 2: Mechanisms Using Symmetric Techniques First Edition
Information Technology - Security Techniques - Non-Repudiation Part 3: Mechanisms Using Asymmetric Techniques First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - DDS-2
Format Using 120 m Length Tape First Edition
Information Technology - Data Interchange on 12,7 mm, 112-Track
Magnetic Tape Cartridges - DLT 2 Format First Edition
Information Technology - Data Interchange on 90 mm Optical Disk
Cartridges - Capacity: 230 Megabytes per Cartridge First Edition
Information Technology - Guideline for the Evaluation and Selection
of CASE Tools First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows Identification Supplementary Services First Edition; ETSI PRETS
300173: 199
Information Technology - Software Measurement - Functional Size
Measurement Part 1: Definition of Concepts First Edition
(Draft)Information Technology - Fibre Channel - Part 111: Physical
and Signaling Interface (FC-PH)
Information Technology - Fibre Channel - Part 131: Switch Fabric
Requirements (FC-SW) First Edition
Information Technology - Fibre Channel - Part 141: Fabric Generic
Requirements (FC-FG) First Edition
(Draft)Information Technology - Fibre Channel - Part 211: Mapping
14169
14362
14363
14364
14365
14366
14367
TR 14369
14392
14393
14394
14395
14417
14443-1
14443-2
14443-3
to HIPPI-FP (FC-FP)
Information Technology - 90 mm Flexible Disk Cartridges for
Information Interchange - 21 MBytes Formatted Capacity - ISO Type
305 First Edition
Information Technology - Test Methods for Measuring Conformance
to Open Systems Interconnection (OSI) Abstract Data Manipulation Application Program Interface (API) (Language Independent) First
Edition
Information Technology - Test Methods for Measuring Conformance
to MHS-Based Electronic Messaging - Application Program Interface
(API) (Language Independent) First Edition
Information Technology - Open Systems Interconnection (OSI)
Abstract Data Manipulation C Language Interfaces - Binding for
Application Program Interface (API) First Edition
Information Technology - MHS-Based Electronic Messaging C
Language Interfaces - Binding for Application Program Interface
(API) First Edition
Information Technology - Test Methods for Measuring Conformance
to Open Systems Interconnection (OSI) Abstract Data Manipulation
C Language Interfaces - Binding for Application Program Interface
(API) First Edition
Information Technology - Test Methods for Measuring Conformance
to MHS-Based Electronic Messaging C Language Interfaces Binding for Application Program Interface (API) First Edition
Information Technology - Programming Languages, Their
Environments and System Software Interfaces - Guidelines for the
Preparation of Language-Independent Service Specifications (LISS)
First Edition
Information Technology - Directory Services - Application Program
Interface (API) (Language Independent) First Edition
Information Technology - Test Methods for Measuring Conformance
to Directory Services - Application Program Interface (API)
(Language Independent) First Edition
Information Technology - Directory Services C Language Interfaces Binding for Application Program Interface (API) First Edition
Information Technology - Test Methods for Measuring Conformance
to Directory Services C Language Interfaces - Binding for
Application Program Interface (API) First Edition
Information Technology - Data Recording Format DD-1 for Magnetic
Tape Cassette Conforming to ISO/IEC 1016 First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards Proximity Cards - Part 1: Physical Characteristics First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards Proximity Cards - Part 2: Radio Frequency Power and Signal
Interface First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards -
14443-4
DIS 14465
TR 14471
14473
14478-1
14495-1
14474
TR 14475
14478-2
14478-3
14478-4
14496-1
14496-2
14496-3
14496-4
14496-5
14496-6
Proximity Cards - Part 3: Initialization and Anticollision First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards Proximity Cards - Part 4: Transmission Protocol First Edition
(Draft)Information Technology - Open Systems Interconnection Conformance Test Suite for the OSI CCR Protocol - Test Suite
Structure and Test Purposes
Information Technology - Software Engineering - Guidelines for the
Adoption of CASE Tools First Edition
Information Technology - Office Equipment - Minimum Information
to Be Specified for Image Scanners First Edition
Information Technology - Computer Graphics and Image Processing
- Presentation Environment for Multimedia Objects (PREMO) - Part
1: Fundamentals of PREMO First Edition
Information Technology - Lossless and Near-Lossless Compression
of Continuous-Tone Still Images: Baseline First Edition; Corrected
and Reprinted 09/15/2000
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Functional Requirements for Static Circuit-Mode Inter-PINX
Connections First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Architecture and Scenarios for Private Integrated Services
Networking Second Edition
Information Technology - Computer Graphics and Image Processing
- Presentation Environment for Multimedia Objects (PREMO) - Part
2: Foundation Component First Edition; Corrected and Reprinted
09/15/2000
Information Technology - Computer Graphics and Image Processing
- Presentation Environment for Multimedia Objects (PREMO) - Part
3: Multimedia Systems Services First Edition
Information Technology - Computer Graphics and Image Processing
- Presentation Environment for Multimedia Objects (PREMO) - Part
4: Modelling, Rendering and Interaction Component First Edition
Information Technology - Coding of Audio-Visual Objects - Part 1:
Systems Second Edition; Amendment 1: 10/15/2001
Information Technology - Coding of Audio-Visual Objects - Part 2:
Visual Second Edition
Information Technology - Coding of Audio-Visual Objects - Part 3:
Audio First Edition; Amendment 1: 09/15/2000; Technical
Corrigendum 1: 08/01/2001
Information Technology - Coding of Audio-Visual Objects - Part 4:
Conformance Testing First Edition
Information Technology - Coding of Audio-Visual Objects - Part 5:
Reference Software First Edition
Information Technology - Coding of Audio-Visual Objects - Part 6:
14515-1
DIS 14515-2
14517
14519
14536
TR 14543-1
TR 14543-2
TR 14543-3
14545
14568
DIS 14576
14598-1
14575
14598-2
14598-3
14709-1
14709-2
DIS 14719
DIS 14720
Delivery Multimedia Integration Framework (DMIF) Second Edition
Information Technology - Portable Operating System Interface
(POSIX) - Test Methods for Measuring Conformance to POSIX Part 1: System Interfaces First Edition; IEEE 2003.1: 2000
(Draft)Information Technology - Test Methods for Measuring
Conformance to POSIX - Part 2: Shell and Utilities
Information Technology - 130 mm Optical Disk Cartridges for
Information Interchange - Capacity: 2,6 Gbytes per Cartridge First
Edition; Corrected and Reprinted 07/15/1998
Information Technology - POSIX Ada Language Interfaces - Binding
for System Application Program Interface (API) - Realtime
Extensions First Edition; ANSI/IEEE Std 1003.5b
Information Technology - Microprocessor Systems - Futurebus+,
Profile (Military) First Edition; ANSI/IEEE Std 896.5
Information Technology - Home Electronic System (HES)
Architecture - Part 1: Introduction First Edition
Information Technology - Home Electronic System (HES)
Architecture - Part 2: Device Modularity First Edition
Information Technology - Home Electronic Systems (HES)
Architecture - Part 3: Communication Layers First Edition
Information Technology - Office Equipment - Method for Measuring
Copying Machine Productivity First Edition
Information Technology - DXL: Diagram EXchange Language for
Tree-Structured Charts First Edition
(Draft)Information Technology - Synchronous Split Transfer Type
System Bus (STbus) - Logical Layer
Information Technology - Software Product Evaluation - Part 1:
General Overview First Edition
Information Technology - Microprocessor Systems - Hetergeneous
InterConnect (HIC) (Low-Cost, Low-latency Scalable Serial
Interconnect for Parallel System Construction) First Edition;IEEE Std
1355
Software Engineering - Product Evaluation - Part 2: Planning and
Management First Edition
Software Engineering - Product Evaluation - Part 3: Process for
Developers First Edition
Information Technology - Configuration of Customer Premises
Cabling (CPC) for Applications - Part 1: Integrated Services Digital
Network (ISDN) Basic Access First Edition
Information Technology - Configuration of Customer Premises
Cabling (CPC) for Applications - Part 2: Integrated Services Digital
Network (ISDN) Primary Rate First Edition
(Draft)Information Technology - Reliable Transfer Service Element Protocol Implementation Conformance Statement (PICS) Proforma
(Draft)Information Technology - Remote Operations Service Element
- Protocol Implementation Conformance Statement (PICS) Proforma
14750
14752
14753
14754
14755
14756
TR 14759
14760
TR 14762
14763-1
TR 14763-2
TR 14763-3
14764
14765
14769
14771
DIS 14776-321
14776-341
14766
14772-1
***CD-ROM ONLY***
Information Technology - Open Distributed Processing - Interface
Definition Language First Edition
Information Technology - Open Distributed Processing - Protocol
Support for Computational Interactions First Edition
Information Technology - Open Distributed Processing - Interface
References and Binding First Edition; ITUT-T Rec.X.930 (1998 E)
Information Technology - Pen-Based Interfaces - Common Gestures
for Text Editing with Pen-Based Systems First Edition
Information Technology - Input Methods to Enter Characters from
the Repertoire of ISO/IEC 10646 with a Keyboard or Other Input
Device First Edition
Information Technology - Measurement and Rating of Performance
of Computer-Based Software Systems First Edition
Software Engineering - Mock up and Prototype - A Categorization of
Software Mock up and Prototype Models and Their Use First Edition
Information Technology - Data Interchange on 90 mm Overwritable
and Read Only Optical Disk Cartridges Using Phase Change Capacity: 1,3 Gbytes per Cartridge First Edition
Information Technology - Home Control Systems - Guidelines for
Functional Safety First Edition
Information Technology - Implementation and Operation of
Customer Premises Cabling - Part 1: Administration First Edition
Information Technology - Implementation and Operation of
Customer Premises Cabling - Part 2: Planning and Installation First
Edition
Information Technology - Implementation and Operation of
Customer Premises Cabling - Part 3: Testing of Optical Fibre Cabling
First Edition
Information Technology - Software Maintenance First Edition
Information Technology - Framework for Protocol Identification and
Encapsulation First Edition
Information technology - Open Distributed Processing - Type
Repository Function First Edition
Information Technology - Open Distributed Processing - Naming
Framework First Edition
(Draft)Information Technology - Small Computer System Interface Part 321: SCSI-3 Block Commands (SBC)
Information Technology - Small Computer System Interface - 3
(SCSI-3) - Part 341: Controller Commmands (SCC) First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Use of OSI Applications Over the
Internet Transmission Control Protocol (TCP) First Edition
Information Technology - Computer Graphics and Image Processing
- The Virtual Reality Modeling Language - Part 1: Functional
Specification and UTF-8 Encoding First Edition
14776-342
FDIS 14776-362
14776-381
DIS 14776-411
14833
14834
14840
14841
14842
14843
ISP 10609-20
ISP 10609-21
ISP 10609-22
ISP 10609-23
Information Technology - Small Computer System Interface - Part
342:Controller Commands - 2 (SCC- 2 ) First Edition
(Draft)Information Technology - Small Computer System Interface
(SCSI) - Part 362: SCSI Multimedia Commands - 2 (MMC-2) 2001
Information Technology - Small Computer System Interface (SCSI) PART 381: Optical Memory Card Device Commands (OMC) First
Edition
(Draft)Information Technology - Small Computer System Interface-3
- Part 411: SCSI-3 Architecture Model (SCSI-3 SAM)
Information Technology - Data Interchange on 12,7 mm 128-Track
Magnetic Tape Cartridges - DLT 3 Format First Edition
Information Technology - Distributed Transaction Processing - the
XA Specification First Edition
Information Technology - 12,65 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - Data-D3-1
Format First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Offer
Supplementary Service First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Do Not
Disturb and Do Not Disturb Override Supplementary Services First
Edi
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Offer Supplementary
Service First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 20: Overview of the
Generalized Multi-Part ISP Structure for TC and TD Group Profiles
for OSI Usa
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 21: Subnetwork-Type
Dependent Requirements for Network Layer and Data Link Layer for
ISDN B-Chann
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 22: Subnetwork-Type
Dependent Requirements for Network Layer and Data Link Layer for
ISDN B-Chann
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
ISP 10609-25
10736
TR 16501
16824
16969
ISP 10609-28
ISP 10609-24
ISP 10609-26
ISP 10609-27
ISP 10609-30
ISP 10609-31
Connection-Mode Network Service - Part 23: Subnetwork-Type
Dependent Requirements for Network Layer and Data Link Layer for
Data Transfe
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 25: Subnetwork-Type
Dependent Requirements for Q.931 Circuit-Switched Operation First
Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Transport Layer Security Protocol First
Edition
Information Technology - Generic Digital Audio-Visual Systems Technical Report on ISO/IEC 16500 - Description of Digital AudioVisual Functionalities First Edition
Information Technology - 120 mm DVD Rewritable Disk (DVDRAM) First Edition
Information Technology - Data Interchange on 120 mm Optical Disk
Cartridges Using +RW Format - Capacity: 3,0 Gbytes and 6,0 Gbytes
First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 28: Subnetwork-Type
Dependent Requirements for Data Link Layer for End Systems
Attached to an ISD
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 24: Subnetwork-Type
Dependent Requirements for Network Layer and Data Link Layer for
Data Transfe
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 26: Subnetwork-Type
Dependent Requirements for Network Layer for Call Control
Procedures Concerni
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 27: Subnetwork-Type
Dependent Requirements for Network Layer for Call Control
Procedures Concerni
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 30: Definition of Profile
TC1131 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 31: Definition of Profile
ISP 10609-32
ISP 10609-33
ISP 10609-34
ISP 10609-35
ISP 10609-36
ISP 10609-37
ISP 10609-38
ISP 10609-40
13719-3
13751
14251
14360
ISP 10609-41
TC1231 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 32: Definition of Profile
TC4111 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 33: Definition of Profile
TC4211 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 34: Definition of Profile
TC43111 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 35: Definition of Profile
TC43112 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 36: Definition of Profile
TC43211 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 37: Definition of Profile
TC43212 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 38: Definition of Profile
TC4331 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 40: Definition of Profile
TD1131 First Edition
Information Technology - Portable Common Tool Environment
(PCTE) - Part 3: Ada Programming Language Binding Second
Edition
Information Technology - Programming Languages, Their
Environments and System Software Interfaces - Programming
Language Extended APL First Edition
Information Technology - Data Interchange on 12,7 mm 36-Track
Magnetic Tape Cartridges First Edition
Information Technology - Open Systems Interconnection (OSI)
Abstract Data Manipulation - Application Program Interface (API)
(Language Independent) First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
ISP 10609-42
ISP 10609-43
ISP 10609-44
ISP 10609-45
ISP 10609-46
ISP 10609-47
ISP 10609-48
ISP 10610-1
ISP 10611-2
ISP 10611-3
FDISP 10611-3
ISP 10611-4
Connection-Mode Network Service - Part 41: Definition of Profile
TD1231 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 42: Definition of Profile
TD4111 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 43: Definition of Profile
TD4211 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 44: Definition of Profile
TD43111 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 45: Definition of Profile
TD43112 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 46: Definition of Profile
TD43211 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 47: Definition of Profile
TD43212 First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 48: Definition of Profile
TD4331 First Edition
Information Technology - International Standardized Profile FOD11 Open Document Format: Simple Document Structure - Character
Content Architecture Only - Part 1: Document Application Profile
(DAP) First Edition; Technical Corrigendum 1-1998
Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 2:
Specification of ROSE, RTSE, ACSE, Presentation and Session
Protocols for Use by MHS Second Edition
Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 3:
AMH11 - Message Transfer (P1) Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 3:
AMH11 - Message Transfer (P1)
Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 4:
FDISP 10611-4
ISP 15121-3
TR 15504-9
60028
60050 CHAP
431
ISP 10611-6
ISP 10612-1
ISP 10612-2
ISP 10612-3
ISP 10612-4
ISP 10612-4
DRAFT AMD 1
ISP 10612-5
ISP 10612-5
DRAFT AMD 1
ISP 10612-6
ISP 10612-6
DRAFT AMD 1
AMH12 and AMH14 - MTS Access (P3) and MTS 94 Access (P3)
Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 4:
AMH12 and AMH14 - MTS Access (P3) and MTS 94 Access (P3)
Information Technology - International Standardized Profile AOD1n
- Interactive Manipulation of ODA Documents - Part 3: AOD13 DTAM/ Manipulation First Edition
Information Technology - Software Process Assessment - Part 9:
Vocabulary First Edition
International Standard of Resistance for Copper Second Edition
International Electrotechnical Vocabulary Chapter 431: Transductors
Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 6:
AMH15 - MS 94 Access (P7) First Edition
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 1:
Subnetwork-Independent Requirements First Edition
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 2:
CSMA/CD LAN Subnetwork-Dependent, Media-Dependent
Requirements First Edition
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 3:
Token Ring LAN Subnetwork-Dependent, Media-Dependent
Requirements First Edition
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 4:
Profile RD51.51 (CSMA/CD LAN - CSMA/CD LAN) First Edition
(Draft)Information Technology - International Standardized Profile
RD - Relaying the MAC Service Using Transparent Bridging - Part 4:
Profile RD51.51 (CSMA/CD LAN - CSMA/CD LAN) Amendment
1: Addition of Management Requirements 1996
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 5:
Profile RD51.54 (CSMA/CD LAN - FDDI LAN) First Edition
(Draft)Information Technology - International Standardized Profile
RD - Relaying the MAC Service Using Transparent Bridging - Part 5:
Profile RD51.54 (CSMA/CD LAN - FDDI LAN) Amendment 1:
Addition of Systems Management Requirements 1996
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 6:
Profile RD54.54 (FDDI LAN - FDDI LAN) First Edition
(Draft)Information Technology - International Standardized Profile
RD - Relaying the MAC Service Using Transparent Bridging - Part 6:
ISP 10612-7
ISP 10612-7
DRAFT AMD 1
ISP 10612-8
ISP 10612-8
DRAFT AMD 1
ISP 10614-1
ISP 10615-3
ISP 10612-9
ISP 10612-9
DRAFT AMD 1
ISP 10613-1
ISP 10613-2
ISP 10613-3
ISP 10613-4
ISP 10613-5
Profile RD54.54 (FDDI LAN - FDDI LAN) Amendment 1: Addition
of Systems Management Requirements 1996
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 7:
Profile RD51.53 (CSMA/CD LAN - Token Ring LAN) First Edition
(Draft)Information Technology - International Standardized Profile
RD - Relaying the MAC Service Using Transparent Bridging - Part 7:
Profile RD51.53 (CSMA/CD LAN - Token Ring LAN) Amendment
1: Addition of Management Requirements 1996
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 8:
Profile RD53.53 (Token Ring LAN - Token Ring LAN) First Edition
(Draft)Information Technology - International Standardized Profile
RD - Relaying the MAC Service Using Transparent Bridging - Part 8:
Profile RD53.53 (Token Ring LAN - Token Ring LAN) Amendment
1: Addition of Management Requirements 1996
Information Technology - International Standardized Profile RC X.25 Protocol Relaying - Part 1: Subnetwork-Independent
Requirements First Edition
Information Technology - International Standardized Profiles ADInn
- OSI Directory - Part 3: ADI21 - DSA Performer Role First Edition
Information Technology - International Standardized Profile RD Relaying the MAC Service Using Transparent Bridging - Part 9:
Profile RD53.54 (Token Ring LAN - FDDI LAN) First Edition
(Draft)Information Technology - International Standardized Profile
RD - Relaying the MAC Service Using Transparent Bridging - Part 9:
Profile RD53.54 (Token Ring LAN - FDDI LAN) Amendment 1:
Addition of Systems Management Requirements; (1996) ***CDROM ONL
Information Techonology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 1:
Subnetwork-Independent Requirements First Edition; Amendment 21998
Information Techonology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 2: LAN
Subnetwork-Dependent, Media-Independent Requirements First
Edition
Information Techonology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 3:
CSMA/CD LAN Subnetwork-Dependent, Media-Dependent
Requirements First Edition
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 4: FDDI
LAN Subnetwork-Dependent, Media-Dependent Requirements First
Edition
Information Techonology - International Standardized Profile RA -
ISP 10613-6
DRAFT AMD 1
ISP 10613-7
ISP 10613-8
ISP 10613-8
DRAFT AMD 1
10737
16509
16825
11586-4
13719-4
ISP 10613-9
ISP 10613-10
ISP 10613-11
Relaying the Connectionless-Mode Network Service - Part 5:
Definition of Profile RA51.51, Relaying the Connectionless-Mode
Network Service Between CSMA/CD LAN Subnetworks First
Edition
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 6:
Definition of Profile RA51.54, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and FDDI
LAN
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 7: PSDN
Subnetwork-Dependent, Media-Dependent Requirements for Virtual
Calls over a Permanent Access First Edition; Amendment 2-1998
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 8:
Definition of Profile RA51.1111, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and PSDNs
Using Vi
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 8:
Definition of Profile RA51.1111, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and PSDNs
U
Information Technology - Elements of Management Information
Related to the OSI Transport Layer Second Edition
Information Technology - Year 2000 Terminology First Edition;
IEEE Std 2000.1
Information Technology - Case for 120 mm DVD-RAM Disks First
Edition
Information Technology - Open Systems Interconnection - Generic
Upper Layers Security: Protecting Transfer Syntax Specification First
Edition
Information Technology - Portable Common Tool Environment
(PCTE) - Part 4: IDL Binding (Interface Definition Language) First
Edition
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 9:
Definition of Profile RA51.1121, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and PSDNs
Using Vi
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 10: Token
Ring LAN Subnetwork-Dependent, Media-Dependent Requirements
First Edition
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 11:
ISP 10613-11
DRAFT AMD 1
ISP 10613-9
DRAFT AMD 1
ISP 10613-12
ISP 10613-12
DRAFT AMD 1
ISP 10613-13
ISP 10613-14
ISP 10613-13
DRAFT AMD 1
13800
TR 14252
14361
ISP 10613-14
DRAFT AMD 1
Definition of Profile RA51.53, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and Token
Ring LAN
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 11:
Definition of Profile RA51.53, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and Token
Ri
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 9:
Definition of Profile RA51.1121, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and PSDNs
U
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Services - Part 12:
Definition of Profile RA53.53, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks First
Edition
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 12:
Definition of Profile RA53.53, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks
Amendment
Information Technology - International Standardization Profile RA Relaying the Connectionless-Mode Network Service - Part 13:
Definition of Profile RA53.54, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks and FDDI
LAN
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 14:
Definition of Profile RA54.54, Relaying the Connectionless-Mode
Network Service between FDDI LAN Subnetworks First Edition
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 13:
Definition of Profile RA53.54, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks and FDDI
Information Technology - Procedure for the Registration of
Identifiers and Attributes for Volume and File Structure First Edition
Information Technology - Guide to the POSIX Open System
Environment (OSE) First Edition; IEEE 1003.0: 1995
Information Technology - MHS-Based Electronic Messaging Application Program Interface (API) (Language Independent) First
Edition
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 14:
Definition of Profile RA54.54, Relaying the Connectionless-Mode
ISP 10613-15
ISP 10613-17
ISP 10613-18
TR 15504-8
60027-4
ISP 10613-19
ISP 10613-15
DRAFT AMD 1
ISP 10613-16
ISP 10613-16
DRAFT AMD 1
ISP 10613-17
DRAFT AMD 1
ISP 10613-18
DRAFT AMD 1
Network Service between FDDI LAN Subnetworks Amendment 1:
Ad
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 15:
Definition of Profile RA53.1111, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks and PSDNs
Usin
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 17:
Definition of Profile RA54.1111, Relaying the Connectionless-Mode
Network Service between FDDI LAN Subnetworks and PSDNs
Using Virt
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 18:
Definition of Profile RA54.1121, Relaying the Connectionless-Mode
Network Service between FDDI LAN Subnetworks and PSDNs
Using Virt
Information Technology - Software Process Assessment - Part 8:
Guide for Use in Determining Supplier Process Capability First
Edition
Letter Symbols to Be Used in Electrical Technology Part 4: Symbols
for Quantities to Be Used for Rotating Electrical Machines First
Edition
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 19:
Security Employing the Network Layer Security Protocol Connectionless-Mode, for RAnn.nn Profiles First Edition
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 15:
Definition of Profile RA53.1111, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks and PSD
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 16:
Definition of Profile RA53.1121, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks and PSDNs
Usin
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 16:
Definition of Profile RA53.1121, Relaying the Connectionless-Mode
Network Service between Token Ring LAN Subnetworks and PSD
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 17:
Definition of Profile RA54.1111, Relaying the Connectionless-Mode
Network Service between FDDI LAN Subnetworks and PSDNs Usi
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 18:
ISP 10613-20
ISP 10614-2
ISP 10614-3
ISP 10614-4
ISP 10614-5
DISP 10614-5
DRAFT AMD 1
ISP 10614-6
10728
DISP 10614-6
DRAFT AMD 1
10729-1
10729-2
Definition of Profile RA54.1121, Relaying the Connectionless-Mode
Network Service between FDDI LAN Subnetworks and PSDNs Usi
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 20:
Security Employing the Network Layer Security Protocol Connection-Mode with SDT-PDU Based Protection over X.25 Packet
Switched Da
Information Technology - International Standardized Profile RC X.25 Protocol Relaying - Part 2: LAN Subnetwork-Dependent,
Media-Independent Requirements First Edition
Information Technology - International Standardized Profile RC X.25 Protocol Relaying - Part 3: CSMA/CD LAN SubnetworkDependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profile RC X.25 Protocol Relaying - Part 4: PSDN Subnetwork-Dependent,
Media-Dependent Requirements for Virtual Calls over a Permanent
Access First Edition
Information Technology - International Standardized Profile RC X.25 Protocol Relaying - Part 5: Definition of Profile RC51.1111,
X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and
PSDNs Using Virtual Calls over a PSTN Leased Line Permanent
Access
(Draft)Information Technology - International Standardized Profile
RC - X.25 Protocol Relaying - Part 5: Definition of Profile
RC51.1111, X.25 Protocol Relaying between CSMA/CD LAN
Subnetworks and PSDNs Using Virtual Calls over a PSTN Leased
Line Permanent
Information Technology - International Standardized Profile RC X.25 Protocol Relaying - Part 6: Definition of Profile RC51.1121,
X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and
PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased
Information Technology - Information Resource Dictionary System
(IRDS) Services Interface First Edition; Amendment 1-1995;
Amendment 2-1996; Amendment 3-1996; Amendment 4-1998
(Draft)Information Technology - International Standardized Profile
RC - X.25 Protocol Relaying - Part 6: Definition of Profile
RC51.1121, X.25 Protocol Relaying between CSMA/CD LAN
Subnetworks and PSDNs Using Virtual Calls over a Digital Data
Circuit/CSDN
Information Technology - Open Systems Interconnection Conformance Test Suite for the Presentation Layer - Part 1: Test
Suite Structure and Test Purposes for the Presentation Protocol First
Edition (AS/NZS 4222.1: 1994)
Information Technology - Open Systems Interconnection Conformance Test Suite for the Presentation Layer - Part 2: Test
Suite Structure and Test Purposes for the ASN.1 Basic Encodings
TR 10730
10731
10732
10739-1
10741-1
10742
DIS 10743
10744
10745
10746-1
10746-2
10746-3
10746-4
10747
10859
DIS 10860.2
10861
First Edition
Information Technology - Open Systems Interconnection - Tutorial
on Naming and Addressing First Edition; SAA/SNZ HB68: 1995
Information Technology - Open Systems Interconnection - Basic
Reference Model - Conventions for the Definition of OSI Services
First Edition
Information Technology - Use of X.25 Packet Layer Protocol to
Provide the OSI Connection-Mode Network Service over the
Telephone Network First Edition; (CCITT RECMN X.614)
Information Technology - Open Systems Interconnection Conformance Test Suite for ISO 9041-1 - Virtual Terminal Basic
Class Protocol - Part 1: Test Suite Structure and Test Purposes First
Edition
Information Technology - User System Interfaces - Dialogue
Interaction - Part 1: Cursor Control for Text Editing First Edition;
Amendment 1 - 12/15/1996
Information Technology - Telecommunications and Information
Exchange Between Systems - Elements of Management Information
Related to OSI Data Link Layer Standards First Edition; Amendment
1-11/15/1995; Amendment 2-07/15/1996; Amendment 3-12/15/1996;
Corrig
(Draft)Information Technology - Standard Music Description
Language (SMDL)
Information Technology - Hypermedia/Time-Based Structuring
Language (HyTime) Second Edition
Information Technology - Open Systems Interconnection - Upper
Layers Security Model First Edition
Information Technology - Open Distributed Processing - Reference
Model: Overview First Edition
Information Technology - Open Distributed Processing - Reference
Model: Foundations First Edition
Information Technology - Open Distributed Processing - Reference
Model: Architecture First Edition
Information Technology - Open Distributed Processing - Reference
Model: Architectural Semantics First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Protocol for Exchange of Inter-Domain
Routeing Information Among Intermediate Systems to Support
Forwarding of ISO 8473 PDUs First Edition; Amendment 1-1996;
Corrigendum
Information Technology - 8-Bit Backplane Interface: STEbus and
Mechanical Core Specifications for Microcomputers First Edition
(Draft)Information Technology - Simple 32-Bit Backplane Bus:
NuBus
Information Technology - Microprocessor Systems - HighPerformance Synchronous 32-Bit Bus: MULTIBUS II First Edition;
10885
10918-1
10918-2
10967-2
10994
TR 11017
11072
11159
11160-1
11160-2
11172-1
11172-2
11172-3
11172-4
TR 11172-5
11179-1
(ANSI/IEEE 1296)
Information Technology - 356 mm Optical Disk Cartridge for
Information Interchange - Write Once First Edition
Information Technology - Digital Compression and Coding of
Continuous-Tone Still Images: Requirements and Guidelines First
Edition
Information Technology - Digital Compression and Coding of
Continuous-Tone Still Images: Compliance Testing First Edition
Information Technology - Language Independent Arithmetric - Part
2: Elementary Numerical Functions First Edition
Information Technology - Data Interchange on 90 mm Flexible Disk
Cartridges Using Modified Frequency Modulation Recording at 31
831 ftprad on 80 Tracks on Each Side - ISO Type 303 First Edition
Information Technology - Framework for Internationalization First
Edition
Information Technology - Computer Graphics - Computer Graphics
Reference Model First Edition
Information Technology - Office Equipment - Minimum Information
to Be Included in Specification Sheets - Copying Machines Second
Edition; Corrected and Reprinted 03/01/1997
Information Technology - Office Equipment - Minimum Information
to Be Included in Specification Sheets - Printers - Part 1: Class 1 and
Class 2 Printers First Edition
Information Technology - Office Equipment - Minimum Information
to Be Included in Specification Sheets - Printers - Part 2: Class 3 and
Class 4 Printers First Edition
Information Technology - Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 1:
Systems First Edition; CEN EN ISO/IEC 11172-1: 1995; AS/NZS
4230.1: 1994; Corrigendum 1: 1996; Corrigendum 2: 1999
Information Technology - Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 2:
Video First Edition; AS/NZS 4230.2: 1994; CENELEC EN 11172-2:
1995; Corrigendum 1: 1996; Corrigendum 2: 1999
Information Technology - Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 3:
Audio First Edition; CEN EN ISO/IEC 11172-3 1995; AS/NZS
4230.3: 1994; Corrigendum 1: 1996
Information Technology - Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 4:
Compliance Testing First Edition
Information Technology - Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 5:
Software Simulation First Edition
Information Technology - Specification and Standardization of Data
Elements - Part 1: Framework for the Specification and
11179-2
11179-3
11179-4
11179-5
11179-6
ISP 11181-1
DISP 11181-2
DISP 11181-3
ISP 11182-1
ISP 11188-1
ISP 11188-3
ISP 11183-1
ISP 11183-2
Standardization of Data Elements First Edition
Information Technology - Specification and Standardization of Data
Elements - Part 2: Classification for Data Elements First Edition
Information Technology - Specification and Standardization of Data
Elements - Part 3: Basic Attributes of Data Elements First Edition
Information Technology - Specification and Standardization of Data
Elements - Part 4: Rules and Guidelines for the Formulation of Data
Definitions First Edition
Information Technology - Specification and Standardization of Data
Elements - Part 5: Naming and Identification Principles for Data
Elements First Edition
Information Technology - Specification and Standardization of Data
Elements - Part 6: Registration of Data Elements First Edition
Information Technology - International Standardized Profile FOD26 Open Document Format: Enhanced Document Structure - Character,
Raster Graphics and Geometric Graphics Content Architectures - Part
1: Document Application Profile (DAP) First Edition; Tech
(Draft)Information Technology - International Standardized Profile
FOD26 - Office Document Format: Enhanced Document Structure Character, Raster Graphics and Geometric Graphics Content
Architectures - Part 2: Implementation Support Requirements
***CD-ROM
(Draft)Information Technology - International Standardized Profile
FOD26 - Office Document Format: Enhanced Document Structure Character, Raster Graphics and Geometric Graphics Content
Architectures - Part 3: Abstract Test Suite (ATS) ***CD-ROM
ONLY***
Information Technology - International Standardized Profile FOD36 Open Document Format: Extended Document Structure - Character,
Raster Graphics and Geometric Graphics Content Architectures - Part
1: Document Application Profile (DAP) First Edition; Tech
Information Technology - International Standardized Profile Common Upper Layer Requirements - Part 1: Basic Connection
Oriented Requirements First Edition
Information Technology - International Standardized Profile Common Upper Layer Requirements - Part 3: Minimal OSI Upper
Layer Facilities First Edition
Information Technology - International Standardized Profiles
AOM1n OSI Management - Management Communications - Part 1:
Specification of ACSE, Presentation and Session Protocols for the
Use by ROSE and CMISE First Edition; AS/NZS 4248.1: 1994
Information Technology - International Standardized Profiles
AOM1n OSI Management - Management Communications - Part 2:
CMISE/ROSE for AOM12 - Enhanced Management
Communications First Edition; EN ISP 11183-2: 1994; AS/NZS
4248.2: 1994
ISP 11183-3
ISP 11184-1
ISP 11184-2
ISP 11184-3
ISP 11185-1
ISP 11185-2
ISP 11185-3
ISP 11185-4
ISP 11185-5
ISP 11185-6
FDISP 11189
ISP 11189
Information Technology - International Standardized Profiles
AOM1n OSI Management - Management Communications - Part 3:
CMISE/ROSE for AOM11 - Basic Management Communications
First Edition; Corrected and Reprinted - 1993; EN ISP 11183-3:
1994; AS/NZS 4248.
Information Technology - International Standardized Profiles
FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles Part 1: FVT121, FVT122 - S-Mode Forms and Paged VTE-Profiles
First Edition
Information Technology - International Standardized Profiles
FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles Part 2: FVT115 - A-Mode Generalized Telnet VTE-Profile First
Edition
Information Technology - International Standardized Profiles
FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles Part 3: FVT114 - A-Mode Transparent VTE-Profile
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 1: FVT211, FVT212 - Sequenced and
Unsequenced Application Control Objects First Edition; CEN EN
ISP 1118
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 2: FVT213, FVT214 - Sequenced and
Unsequenced Terminal Control Objects First Edition; CEN EN ISP
11185-2
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 3: FVT215, FVT216 - Application RIO
Record Loading Control Object, Terminal RIO Record Notification
Cont
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 4: FVT217 - Horizontal Tabulation Control
Object First Edition; CEN EN ISP 11185-4: 1995
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 5: FVT218 - Logical Image Control Object
First Edition; CEN EN ISP 11185-5: 1995
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 6: FVT219 - Status Message Control Object
First Edition; CEN EN ISP 11185-6: 1995
(Draft)Information Technology - International Standardized Profile
FD12 - Directory Data Definitions - MHS Use of the Directory
Information Technology - International Standardized Profile FD12 -
11319
11321
ISP 11185-7
ISP 11185-8
ISP 11185-9
ISP 11185-10
ISP 11185-11
ISP 11185-12
ISP 11185-13
ISP 11185-14
ISP 11185-15
ISP 11185-16
Directory Data Definitions - MHS Use of the Directory First Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan Recording First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - DATA/DAT
Format First Edition
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 7: FVT2110 - Entry-Control Control Object
First Edition; CEN EN ISP 11185-7: 1995
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 8: FVT221 - Forms FEICO (Field Entry
Instruction Control Object) No. 1 First Edition; CEN EN ISP 11185-8
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 9: FVT222 - Paged FEICO (Field Entry
Instruction Control Object) No. 1 First Edition (CEN EN ISP 111859
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 10: FVT231 - Forms FEPCO (Field Entry
Pilot Control Object) No. 1 First Edition; CEN EN ISP 11185-10: 19
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 11: FVT232 - Paged FEPCO (Field Entry
Pilot Control Object) No. 1 First Edition; CEN EN ISP 11185-11: 19
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions Part 12: FVT2116 - Generalized Telnet Synch
Control Object; FVT2117 - Generalized Telnet Signal Control
Object;
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 13: FVT2111 - Waiting Time Control Object
First Edition
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 14: FVT2112 - Printer Control Object First
Edition
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 15: FVT2113 - Field Definition Management
Control Object First Edition
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
ISP 11185-17
ISP 11186-1
11404
11411
11458
ISP 11186-2
ISP 11186-3
ISP 11186-4
ISP 11187-1
ISP 11187-2
ISP 11187-3
ISP 11187-4
ISP 11187-5
ISP 11187-6
Type Definitions - Part 16: FVT2114 - Terminal Signal Titles
Control Object First Edition
Information Technology - International Standardized Profiles
FVT2nn - Virtual Terminal Basic Class - Register of Control Object
Type Definitions - Part 17: FVT2115 - Help Text Control Object
First Edition
Information Technology - International Standardized Profiles
FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 1: FVT321 - Font Assignment
Type No. 1 First Edition
Information Technology - Programming Languages, Their
Environments and System Software Interfaces - LanguageIndependent Datatypes First Edition
Information Technology - Representation for Human Communication
of State Transition of Software First Edition
Information Technology - Microprocessor Systems - VICbus - InterCrate Cable Bus First Edition; Amendment 1 07-2000
Information Technology - International Standardized Profiles
FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 2: FVT311 - Repertoire
Assignment Type for ISO/IEC 10646 First Edition
Information Technology - International Standardized Profiles
FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 3: FVT312 - Repertoire
Assignment Type for ISO/IEC 2022 Level 2 First Edition
Information Technology - International Standardized Profiles
FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 4: FVT322 - Font Assignment
Type No. 2 First Edition
Information Technology - International Standardized Profiles
AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles
- Part 1: Common VT Protocol Requirements First Edition
Information Technology - International Standardized Profiles
AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles
- Part 2: Common Supporting Layers Requirements First Edition
Information Technology - International Standardized Profiles
AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles
- Part 3: AVT22 - S-Mode Forms Application Profile First Edition
Information Technology - International Standardized Profiles
AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles
- Part 4: AVT23 - S-Mode Paged Application Profile First Edition
Information Technology - International Standardized Profiles
AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles
- Part 5: AVT16 - A-Mode Generalized Telnet Application Profile
First Edition
Information Technology - International Standardized Profiles
ISP 11188-2
ISP 11190
11518-1
11518-2
11518-3
11571
ISP 12060-3
ISP 12060-5
14598-4
ISP 12060-4
DISP 12060-6
13866
13868
14598-5
14598-6
AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles
- Part 6: AVT15 - A-Mode Transparent Application Profile First
Edition
Information Technology - International Standardized Profile Common Upper Layer Requirements - Part 2: Basic Connection
Oriented Requirements for ROSE-Based Profiles First Edition
Information Technology - International Standardized Profile FDI3 Directory Data Definitions - FTAM Use of the Directory First
Edition; CEN EN ISO/IEC ISP 11190: 1996
Information Technology - High-Performance Parallel Interface - Part
1: Mechanical, Electrical and Signalling Protocol Specification
(HIPPI-PH) First Edition
Information Technology - High-Performance Parallel Interface - Part
2: Framing Protocol (HIPPI-FP) Second Edition
Information Technology - High-Performance Parallel Interface - Part
3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link
Control Protocol Data Units (HIPPI-LE) First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Networks Addressing Second Edition
Information Technology - International Standardized Profiles OSI
Management - Management Functions - Part 3: AOM213 - Alarm
Reporting Capabilities First Edition
Information Technology - International Standardized Profiles - OSI
Management - Management Functions - Part 5: AOM231 - General
Log Control First Edition
Software Engineering - Product Evaluation - Part 4: Process for
Acquirers First Edition
Information Technology - International Standardized Profiles OSI
Management - Management Functions - Part 4: AOM221 - General
Event Report Management First Edition
(Draft)Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 6: Security
Management Capabilities (Including Profiles AOM2421, AOM2422
and AOM2423) ***CD-ROM ONLY***
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call
Completion Supplementary Services First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Name Identification
Supplementary Services First Edition; Amendment 1:05/01/2001
Information Technology - Software Product Evaluation - Part 5:
Process for Evaluators First Edition
Software Engineering - Product Evaluation - Part 6: Documentation
14608-1
14608-2
14651
14662
14699
14700
15286
ISP 15287-2
15291
TR 15294
DIS 15298
15307
16500-5
16500-6
16500-7
16500-8
16500-9
11572
11573
of Evaluation Modules First Edition
Information Technology - Open Systems Interconnection - The
Directory: Directory Access Protocol - Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - The
Directory: Directory System Protocol - Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - International String Ordering and
Comparison - Method for Comparing Character Strings and
Description of the Common Template Tailorable Ordering First
Edition
Information Technology - Open-Edi Reference Model First Edition
Information Technology - Open Systems Interconnection - Transport
Fast Byte Protocol First Edition
Information Technology - Open Systems Interconnection - Network
Fast Byte Protocol First Edition
Information Technology - 130 mm Optical Disk Cartridges for
Information Interchange - Capacity: 5,2 Gbytes per Cartridge
Information Technology - Standardized Application Environment
Profile - Part 2: Posix Realtime Application Support (AEP) First
Edition; IEEE Std 1003.13
Information Technology - Programming Languages - Ada Semantic
Interface Specification (ASIS) First Edition
Information Technology - Methods for Data Flow Control at
Synchronous and Asynchronous DTE-DCE Interfaces First Edition
(Draft)Information Technology - OSI Applications Program
Interfaces - File Transfer, Access, and Management (C Language)
Information Technology - Data Interchange on 12,7 mm 128-Track
Magnetic Tape Cartridges - DLT 4 Format First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 5: High and Mid-Layer Protocols First Edition
Informaiton Technology - Generic Digital Audio-Visual SystemsPart 6: Information Presentation First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 7: Basic Security Tools First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 8: Management Architecture and Protocols First Edition
Information Technology - Generic Digital Audio-Visual Systems Part 9: Usage Information Protocols First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures
and Protocol Third Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Synchronization Methods and
Technical Requirements for Private Integrated Services Networks
11574
11575
11576
11577
11578
11579-1
11579-2
11579-3
11581-1
11581-2
11581-3
11581-6
11582
11584
11586-1
11586-2
First Edition; AS/NZS 4138: 1995
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Circuit-Mode 64 kbit/s Bearer Services - Service Description,
Functional Capabilities and Information Flows Second Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Protocol Mappings for the OSI Data
Link Service First Edition
Information Technology - Procedure for the Registration of
Algorithms for the Lossless Compression of Data First Edition
Information Technology - Open Systems Interconnection - Network
Layer Security Protocol First Edition
Information Technology - Open Systems Interconnection - Remote
Procedure Call (RPC) First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Part 1: Reference Configuration for PISN Exchanges (PINX) First
Edition; (ETSI ETS 300 475-1: 1995) (Corrigendum 1-1996)
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Part 2: Reference Configuration for HS-PISN Exchanges (HS-PINX)
First Edition
Information Technology - Private Integrated Services Network - Part
3: Reference Configuration for PINX Extension Lines First Edition
Information Technology - User System Interfaces and Symbols - Icon
Symbols and Functions - Part 1: Icons - General First Edition
Information Technology - User System Interfaces and Symbols - Icon
Symbols and Functions - Part 2: Object Icons Fisrt Edition
Information Technology - User System Interfaces and Symbols - Icon
Symbols and Functions - Part 3: Pointer First Edition
Information Technology - User System Interfaces and Symbols - Icon
Symbols and Functions - Part 6: Action Icons First Edition
Information Technology - Telecommunications and Information
Exchange between Systems - Private Integrated Services Network Generic Functional Protocol for the Support of Supplementary
Services - Inter-Exchange Signalling Procedures and Protocols First
Ed
Information Technology - Telecommunications and Information
Exchange Between Systems - Private Integrated Services Network Circuit-Mode Multi-Rate Bearer Services - Service Description,
Functional Capabilities and Information Flows First Edition
Information Technology - Open Systems Interconnection - Generic
Upper Layers Security: Overview, Models and Notation First Edition
Information Technology - Open Systems Interconnection - Generic
Upper Layers Security: Security Exchange Service Element (SESE)
Service Definition First Edition
11586-3
9646-4
10175-2
10175-3
TR 10176
ISP 10609-11
ISP 10609-12
10918-3
10967-1
11518-6
11518-8
ISP 10613-5
DRAFT AMD 1
ISP 10613-6
10918-4
Information Technology - Open Systems Interconnection - Generic
Upper Layers Security: Security Exchange Service Element (SESE)
Protocol Specification First Edition
Information Technology - Open Systems Interconnection Conformance Testing Methodology and Framework - Part 4: Test
Realization Second Edition; CAN/CSA-ISO/IEC 9646-4-95; CEN
EN ISO/IEC 9646-4: 1996
Information Technology - Text and Office Systems - Document
Printing Application (DPA) - Part 2: Protocol Specification First
Edition
Information Technology - Text and Office Systems - Document
Printing Application (DPA) - Part 3: Management Abstract Service
Definitions and Procedures First Edition
Information Technology - Guidelines for the Preparation of
Programming Language Standards Third Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 11: CSMA/CD
Subnetwork-Dependent, Media-Dependent Requirements First
Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 12: Definition of Profile
TC51, Provision of the OSI Connection-Mode Transport Service
Using the
Information Technology - Digital Compression and Coding of
Continuous-Tone Still Images: Extensions First Edition; Amendment
1: 12/01/1999
Information Technology - Language Independent Arithmetric - Part
1: Integer and Floating Point Arithmetic First Edition
Information Technology - High-Performance Parallel Interface - Part
6: Physical Switch Control (HIPPI-SC) First Edition Second Edition
Information Technology - High-Performance Parallel Interface Part
8: Mapping to Asynchronous Transfer Mode (HIPPI-ATM) First
Edition
(Draft)Information Technology - International Standardized Profile
RA - Relaying the Connectionless-Mode Network Service - Part 5:
Definition of Profile RA51.51, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks
Amendment 1:
Information Technology - International Standardized Profile RA Relaying the Connectionless-Mode Network Service - Part 6:
Definition of Profile RA51.54, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN Subnetworks and FDDI
LAN Subnetw
Information Technology - Digital Compression and Coding of
DISP 10609-12
DRAFT AMD 1
11518-9
11518-10
11544
11557
11558
11559
11560
11569
11570
9646-5
DIS 9660
9661
TR 9789
Continuous-Tone Still Images: Registration of JPEG Profiles, SPIFF
Profiles, SPIFF Tags, SPIFF Colour Spaces, APPn Markers, SPIFF
Compression Types and Registration Authorities (REGAUT) First
Editi
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 12: Definition of Profile
TC51, Provision of the OSI Connection-Mode Transport Service Usi
Information Technology - High-Performance Parallel Interface - Part
9: Serial Specification (HIPPI-Serial) First Edition
Information Technology - High-Performance Parallel Interface - Part
10: 6 400 Mbit/s Physical Layer (HIPPI-6400-PH) First Edition
Information Technology - Coded Representation of Picture and
Audio Information - Progressive Bi-Level Image Compression First
Edition; Corrigendum 1-1995; CEN EN ISO/IEC 11544 : 1995
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge
for Information Interchange - Helical Scan Recording - DDS-DC
Format Using 60 m and 90 m Length Tapes First Edition
Information Technology - Data Compression for Information
Interchange - Adaptive Coding with Embedded Dictionary - DCLZ
Algorithm First Edition
Information Technology - Data Interchange on 12,7 mm Wide 18Track Magnetic Tape Cartridges - Extended Format First Edition
Information Technology - Information Interchange on 130 mm
Optical Disk Cartridges Using the Magneto-Optical Effect, for Write
Once, Read Multiple Functionality First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - 26-Pole Interface Connector
Mateability Dimensions and Contact Number Assignments First
Edition; AS/NZS 4244: 1994
Information Technology - Telecommunications and Information
Exchange Between Systems - Open Systems Interconnection Transport Protocol Identification Mechanism First Edition; AS/NZS
4245: 1994
Information Technology - Open Systems Interconnection Conformance Testing Methodology and Framework - Part 5:
Requirements on Test Laboratories and Clients for the Conformance
Assessment Process Second Edition; CAN/CSA-ISO/IEC 9646-5-95;
CEN EN ISO/IEC 9
(Draft)Information Technology - Volume and File Structure of CDROM for Information Interchange
Information Technology - Data Interchange on 12,7 mm Wide
Magnetic Tape Cartridges - 18 Tracks, 1 491 Data Bytes per
Millimetre Second Edition
Information Technology - Guidelines for the Organization and
Representation of Data Elements for Data Interchange - Coding
9646-6
9646-7
9796-2
9796-3
9797-1
FDIS 9797-2
9798-1
9798-2
9798-3
9798-4
9798-5
9804
9805-1
9805-2
9834-1
Methods and Principles First Edition
Information Technology - Open Systems Interconnection Conformance Testing Methodology and Framework - Part 6: Protocol
Profile Test Specification First Edition; CEN EN ISO/IEC 9646-6:
1996
Information Technology - Open Systems Interconnection Conformance Testing Methodology and Framework - Part 7:
Implementation Conformance Statements First Edition; Corrigendum
1 04/01/1997
Information Technology - Security Techniques - Digital Signature
Schemes Giving Message Recovery - Part 2: Mechanisms Using a
Hash-Function First Edition
Information Technology - Security Techniques - Digital Signature
Schemes Giving Message Recovery - Part 3: Discrete Logarithm
Based Mechanisms First Edition; Replaces ISO 9796: 1991
Information Technology - Security Techniques - Message
Authentication Codes (MACs) - Part 1: Mechanisms Using a Block
Cipher First Edition
(Draft)Information Technology - Security Techniques - Message
Authentication Codes (MACs) - Part 2: Mechanisms Using a
Dedicated Hash-Function
Information Technology - Security Techniques - Entity
Authentication - Part 1: General Second Edition
Information Technology - Security Techniques - Entity
Authentication - Part 2: Mechanisms Using Symmetric Encipherment
Algorithms Second Edition
Information Technology - Security Techniques - Entity
Authentication - Part 3: Mechanisms Using Digital Signature
Techniques Second Edition
Information Technology - Security Techniques - Entity
Authentication - Part 4: Mechanisms Using a Cryptographic Check
Function Second Edition
Information Technology - Security Techniques - Entity
Authentication - Part 5: Mechanisms Using Zero Knowledge
Techniques First Edition
Information Technology - Open Systems Interconnection - Service
Definition for the Commitment, Concurrency and Recovery Service
Element Third Edition
Information Technology - Open Systems Interconnection - Protocol
for the Commitment, Concurrency and Recovery Service Element:
Protocol Specification Third Edition
Information Technology - Open Systems Interconnection - Protocol
for the Commitment, Concurrency and Recovery Service Element:
Protocol Implementation Conformance Statement (PICS) Proforma
First Edition
Information Technology - Open Systems Interconnection -
9834-2
9834-3
9834-4
9899
9945-1
9945-2: DAM
1.2
9834-5
9834-6
9834-7
9945-1 DRAFT
AMD 4
9945-2 DRAFT
AMD 1
9945-2
VOLUME 1
9945-2
VOLUME 2
Procedures for the Operation of OSI Registration Authorities:
General Procedures First Edition; Amendment 1 05-01-1997;
Amendment 2 10-15-1998
Information Technology - Open Systems Interconnection Procedures for the Operation of OSI Registration Authorities: - Part
2: Registration Procedures for OSI Document Types First Edition;
AS/NZS 4153.2: 1994
Information Technology - Open Systems Interconnection Procedures for the Operation of OSI Registration Authorities:
Registration of Values of RH-Name-Tree Components for Joint ISO
and ITU-T Use Second Edition
Information Technology - Open Systems Interconnection Procedures for the Operation of OSI Registration Authorities - Part 4:
Register of VTE Profiles First Edition
Programming Languages - C Second Edition; Technical Corrigendum
1:09/01/2001
Information Technology - Portable Operating System Interface
(POSIX) - Part 1: System Application Program Interface (API) (C
Language) Second Edition; IEEE 1003.1
(Draft)Information Technology - Portable Operating System Interface
(POSIX) - Part 2: Shell and Utilities Amendment 1: Batch
Environments 1999
Information Technology - Open Systems Interconnection Procedures for the Operation of OSI Registration Authorities - Part 5:
Register of VT Control Object Definitions First Edition (AS/NZS
4153.5: 1993)
Information Technology - Open Systems Interconnection Procedures for the Operation of OSI Registration Authorities:
Application Processes and Application Entities First Edition
(AS/NZS 4153.6: 1994)
Information Technology - Open Systems Interconnection Procedures for the Operation of OSI Registration Authorities:
Assignment of International Names for Use in Specific Contexts First
Edition
(Draft)Iformation Technology - Portable Operating System Interface
(POSIX) - Part 1: System Application Program Interface (API) (C
Language) Amendment 4: Protocol Independent Interfaces (PII) 1997
(Draft)Information Technology - Portable Operating System Interface
(POSIX) - Part 2: Shell and Utilities Amendment 1: User Portability
Extension 1996
Information Technology - Portable Operating System Interface
(POSIX) Part 2: Shell and Utilities Volume 1 First Edition
(ANSI/IEEE Std 1003.2) (CEN EN ISO/IEC9945-2: 1995)
Information Technology - Portable Operating System Interface
(POSIX) Part 2: Shell and Utilities Volume 2 First Edition
(ANSI/IEEE Std 1003.2)
9973
9979
9983
9995-1
9995-2
9995-3
9995-4
9995-5
9995-8
TR 10000-1
TR 10000-2
9995-6
9995-7
TR 10000-3
Information Technology - Computer Graphics and Image Processing
- Procedures for Registration of Graphical Items First Edition;
Replaces ISO/TR 9973
Information Technology - Security Techniques - Procedures for the
Registration of Cryptographic Algorithms Second Edition
Information Technology - Designation of Unrecorded Flexible Disk
Cartridges Second Edition
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 1: General Principles Governing Keyboard Layouts
First Edition; (Replaces ISO 3243, 4169, 1091, 1092, 1093, 2126,
2530, 3244, 8884) (AS/NZS 4395.1:1996)
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 2: Alphanumeric Section First Edition; Replaces ISO
3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884; AS/NZS
9995-2:1994 Amendment 1:12/15/1999
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 3: Complementary Layouts of the Alphanumeric Zone
of the Alphanumeric Section First Edition; Amendment 1: 02-011999; Supersedes all parts of ISO 1090: 1981; ISO 1091: 1977; ISO 1
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 4: Numeric Section First Edition (Replaces ISO 3243,
4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS
4395.4:1996)
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 5: Editing Section First Edition (Replaces ISO 3243,
4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS
4395.5:1996)
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 8: Allocation of Letters to the Keys of a Numeric
Keypad First Edition (AS/NZS 4395.8:1996)
Information Technology - Framework and Taxonomy of International
Standardized Profiles - Part 1: General Principles and Documentation
Framework Fourth Edition
Information Technology - Framework and Taxonomy of International
Standardized Profiles - Part 2: Principles and Taxonomy for OSI
Profiles Fifth Edition
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 6: Function Section First Edition (Replaces ISO 3243,
4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS
4395.6:1996)
Information Technology - Keyboard Layouts for Text and Office
Systems - Part 7: Symbols Used to Represent Functions First Edition;
Replaces ISO 1093; AN/NZS 4395.7:1996; Amendment 1-1996
Information Technology - Framework and Taxonomy of International
Standardized Profiles - Part 3: Principles and Taxonomy for Open
System Environment Profiles Second Edition
10021-1
FDIS 10021-1
10021-1 DRAFT
AMD 1
10021-1 DRAFT
AMD 2
10021-1 DRAFT
AMD 4
10021-1 DRAFT
AMD 5
10021-1 DRAFT
AMD 6
FDIS 10021-2
10021-2
10021-2 DRAFT
AMD 1
10021-2 DRAFT
AMD 2
10021-2 DRAFT
AMD 3
FDIS 10021-4
10021-4
10021-6
FDIS 10021-7
Information Technology - Text Communication - Message-Oriented
Text Interchange Systems (MOTIS) - Part 1: System and Service
Overview First Edition (CORR 1-2: 1991) (CORR 3-5:1992) (CORR
6-1994) (CORR 7- 1994) (AMD 1-1994) (CAN/CSA-ISO/IEC10021-1 -94)
(Draft)Information Technology - Message Handling Systems (MHS)
- Part 1: System and Service Overview
(Draft)Information Technology - Message Handling Systems (MHS):
System and Service Overview; Amendment 1: International
Registration Authority 1997
(Draft)Information Technology - Message Handling Systems (MHS):
System and Service Overview; Amendment 2: Additional Security
Features 1997
(Draft)Information Technology - Text Communication - MessageOriented Text Interchange Systems (MOTIS) - Part 1: System and
Service Overview Amendment 4: IPM Security Extensions; (1994)
***CD-ROM ONLY***
(Draft)Information Technology - Message Handling Systems (MHS):
System and Service Overview; Amendment 5: Fax Cover Page 1997
(Draft)Information Technology - Message Handling Systems (MHS):
System and Service Overview; Amendment 6: Auto-Advise AutoAction 1997
(Draft)Information Technology - Message Handling Systems (MHS):
Overall Architecture
Information Technology - Message Handling Systems (MHS):
Overall Architecture Second Edition; Technical Corrigendum 1: 1998
(Draft)Information Technology - Message Handling Systems (MHS):
Overall Architecture; Amendment 1: International Registration
Authority 1997
(Draft)Information Technology - Message Handling Systems (MHS):
Overall Architecture; Amendment 2: Use of ISO/IEC 10646
Characters in OR-Addresses 1997
(Draft)Information Technology - Message Handling Systems (MHS):
Overall Architecture; Amendment 3: Protected Change Credentials
1997
(Draft)Information Technology - Message Handling Systems (MHS):
Message Transfer System: Abstract Service Definition and
Procedures
Information Technology - Message Handling Systems (MHS):
Message Transfer System: Abstract Service Definition and
Procedures Second Edition; Corrigendum 1-1998; Corrrigendum 2
and 3: 05/01/2000
Information Technology - Message Handling Systems (MHS):
Protocol Specifications Second Edition; Technical Corrigendum 11998; Amendment 1: 12/15/1998
(Draft)Information Technology - Message Handling Systems (MHS):
10021-7 DRAFT
AMD 3
10021-8
10021-4 DRAFT
AMD 1
10021-4 DRAFT
AMD 2.2
10021-4 DRAFT
AMD 3
10021-4 DRAFT
AMD 5
10021-5
10021-7
10021-9
10021-10
TR 10021-11
10022
TR 10023
TR 10024
10025-1
Interpersonal Messaging System
(Draft)Information Technology - Message Handling Systems (MHS):
Interpersonal Messaging System; Amendment 3: Auto-Advise AutoAction
Information Technology - Message Handling Systems (MHS) - Part
8: Electronic Data Interchange Messaging Service Second Edition
(Draft)Information Technology - Message Handling Systems (MHS):
Message Transfer System: Abstract Service Definition and
Procedures; Amendment 1: Use of ISO/IEC 10646 Characters in ORAddresses 1997
(Draft)Information Technology - Message-Handling Systems (MHS):
Message Transfer System: Abstract Service Definition and
Procedures Amendment 2: Minor Enhancements: New Values of
Error Codes for Security and Security Defect Resolution 1997
(Draft)Information Technology - Message Handling Systems (MHS):
Message Transfer System: Abstract Service Definition and
Procedures; Amendment 3: Using V3 Certificates 1997
(Draft)Information Technology - Message Handling Systems (MHS):
Message Transfer System: Abstract Service Definition and
Procedures; Amendment 5: Fax Cover Page
Information Technology - Message Handling Systems (MHS):
Message Store: Abstract Service Definition Fourth Edition;
Incorporates Amendment 1: 1998 and Technical Corrigendum 1:
1998
Information Technology - Message Handling Systems (MHS):
Interpersonal Messaging System Second Edition; Corrigendum 1 0901-1998; Amendment 1 10-15-1998; Technical Corrigendums (2 and
3) 05-01-2000
Information Technology - Message Handling Systems (MHS):
Electronic Data Interchange Messaging System Second Edition
Information Technology - Message Handling Systems (MHS): MHS
Routing Second Edition
Information Technology - Message Handling Systems (MHS): MHS
Routing - Guide for Messaging Systems Managers First Edition
Information Technology - Open Systems Interconnection - Physical
Service Definition Second Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Formal Description of ISO 8072 in
LOTOS First Edition (AS/NZS 4164: 1994)
Information Technology - Telecommunications and Information
Exchange Between Systems - Formal Description of ISO 8073
(Classes 0,1,2,3) in LOTOS First Edition (AS/NZS 4165: 1994)
Information Technology - Telecommunications and Information
Exchange Between Systems - Transport Conformance Testing for
Connection- Mode Transport Protocol - Part 1: Test Suite Structure
and Test Purposes for ISO/IEC 8073: 1988 Classes 0, 2 over CONS
10025-2
10025-3
10026-1
10026-2
10026-3
10026-4
10026-5
10026-6
DIS 10026-7
10027
10028
DIS 10028-2
TR 10029
10030
and
Information Technology - Telecommunications and Information
Exchange Between Systems - Transport Conformance Testing for
Connection-Mode Transport Protocol - Part 2: Abstract Test Suites
and PIXIT for ISO/IEC 8073:1988 Classes 0, 2 Over CONS and 4
over CLN
Information Technology - Telecommunications and Information
Exchange Between Systems - Transport Conformance Testing for
Connection-Mode Transport Protocol Operating over ConnectionMode Network Service - Part 3: Transport Test Management Protocol
Specific
Information Technology - Open Systems Interconnection Distributed Transaction Processing - Part 1: OSI TP Model Second
Edition
Information Technology - Open Systems Interconnection Distributed Transaction Processing - Part 2: OSI TP Service Third
Edition
Information Technology - Open Systems Interconnection Distributed Transaction Processing - Part 3: Protocol Specification
Third Edition
Information Technology - Open Systems Interconnection Distributed Transaction Processing: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection Distributed Transaction Processing - Part 5: Application Context
Proforma and Guidelines When Using OSI TP First Edition
Information Technology - Open Systems Interconnection Distributed Transaction Processing - Part 6: Unstructured Data
Transfer First Edition
(Draft)Information Technology - Open Systems Interconnection Distributed Transaction Processing - Part 7: Message Queueing
***CD-ROM ONLY***
Information Technology - Information Resource Dictionary System
(IRDS) Framework First Edition (AS/NZS 4101: 1993)
Information Technology - Telecommunications and Information
Exchange Between Systems - Definition of the Relaying Functions of
a Network Layer Intermediate System First Edition (AS/NZS 4209:
1994)
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - Definition of the Relaying
Functions of a Network Layer Intermediate System - Part 2:
Connection-Mode Network Service
Information Technology - Telecommunications and Information
Exchange between Systems - Operation of an X.25 Interworking Unit
First Edition; NZS/ISO/IEC TR10029: 1989; AS 4015: 1992
Information Technology - Telecommunications and Information
DIS 10030-2
10032
TR 10034
DIS 10035-1
10035-2
10035-2 DRAFT
AMD 1
10036
TR 10037
10040
10089
10090
TR 10091
10116
10118-1
10118-2
10118-3
Exchange Between Systems - End System Routeing Information
Exchange Protocol for Use in Conjunction with ISO/IEC 8878
Second Edition
(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - End System Routeing
Information Exchange Protocol for Use in Conjunction with ISO
8878 - Part 2: Protocol Implementation Conformance Statement
(PICS)
Information Technology - Reference Model of Data Management
First Edition
Guidelines for the Preparation of Conformity Clauses in
Programming Language Standards First Edition
(Draft)Information Technology - Open Systems Interconnection Connectionless Protocol for the Association Control Service Element:
Protocol Specification ***CD ROM ONLY***
Information Technology - Open Systems Interconnection Connectionless Protocol for the Association Control Service Element:
Protocol Implementation Conformance Statement (PICS) Proforma
First Edition
(Draft)Information Technology - Open Systems Interconnection Connectionless Protocol for the Association Control Service Element:
Protocol Implementation Conformance Statement (PICS) Proforma
Amd. 1: Incorporation of Authentication; (1996) ***CD-ROM
ONLY
Information Technology - Font Information Interchange - Procedures
for Registration of Font-Related Identifiers Second Edition;
Corrigendum 1: 03-01-2001
Information Technology - SGML and Text-Entry Systems Guidelines for SGML Syntax-Directed Editing Systems First Edition
(AS/NZS 4110: 1993)
Information Technology - Open Systems Interconnection - Systems
Management Overview Second Edition
Information Technology - 130 mm Rewritable Optical Disk Cartridge
for Information Interchange First Edition
Information Technology - 90 mm Optical Disk Cartridges,
Rewritable and Read Only, for Data Interchange First Edition
Information Technology - Technical Aspects of 130 mm Optical Disk
Cartridge Write-Once Recording Format First Edition
Information Technology - Security Techniques - Modes of Operation
for an n-Bit Block Cipher Second Edition
Information Technology - Security Techniques - Hash-Functions Part 1: General Second Edition
Information Technology - Security Techniques - Hash-Functions Part 2: Hash-Functions Using an n-Bit Block Cipher Second Edition
Information Technology - Security Techniques - Hash-Functions Part 3: Dedicated Hash-Functions First Edition
10118-4
10149
10164-1
10164-2
10164-3
10164-4
10164-5
10164-5 DRAFT
AMD 3
10164-6
10164-7
10164-8
10164-13
10164-13
Information Technology - Security Techniques - Hash-Functions Part 4: Hash-Functions Using Modular Arithmetic First Edition
Information Technology - Data Interchange on Read-Only 120 mm
Optical Data Disks (CD-ROM) Second Edition
Information Technology - Open Systems Interconnection - Systems
Management: Object Management Function First Edition; CCITT
RECMN X.730; AS/NZS 4152.1: 1994; CAN/CSA-ISO/IEC-101641-95; Amendment 1-1996; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems
Management: State Management Function First Edition; CCITT
RECMN X.731; AS/NZS 4152.2: 1994; CAN/CSA-ISO/IEC-101642-95; Amendment 1-1996; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems
Management: Attributes for Representing Relationships First Edition;
CCITT RECMN X.733; CAN/CSA-ISO/IEC-10164-3-95;
Amendment 1 - 05/15/1996; Corrigendum 1 - 12/15/1996
Information Technology - Open Systems Interconnection - Systems
Management: Alarm Reporting Function First Edition; CCITT
RECMN X.733; Corrigendum 1-12/15/1996; AS/NZS 4152.4: 1994;
Amendment 1- 12/15/1995; CAN/CSA-ISO/IEC 10164-4-95;
Corrigendum 1-09/01/1
Information Technology - Open Systems Interconnection - Systems
Management: Event Report Management Function First Edition;
CCITT RECMN X.734; Corrigendum 1-12/15/1996; AS/NZS
4152.5: 1994; Amendment 1-12/15/1995; Technical Corrigendum 212/15/1999
(Draft)Information Technology - Open Systems Interconnection Systems Management: Event Report Management Function
Amendment 3: SM - Event Report Management Function - Enhanced
Event Control; (1996) ***CD-ROM ONLY***
Information Technology - Open Systems Interconnection - Systems
Management: Log Control Function First Edition; AS/NZS 4152.6:
1994; CAN/CSA-ISO/IEC 10164-6-95; Amendment 1-05/15/1996;
Corrigendum 1-12/15/1996
Information Technology - Open Systems Interconnection - Systems
Management: Security Alarm Reporting Function First Edition;
CCITT RECMN X.736; AS/NZS 4152.7: 1993; Amendment 1-1995;
CAN/CSA-ISO/IEC 10164-7-95; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems
Management: Security Audit Trail Function First Edition; Technical
Corrigendum 1: 12/15/1995; Technical Corrigendum 2: 12/15/1996;
Technical Corrigendum 3: 11/01/1999
Information Technology - Open Systems Interconnection - Systems
Management: Summarization Function First Edition; Amendment 1
04-01-97; Corrigendum 1: 11-15-99
(Draft)Information Technology - Open Systems Interconnection -
DRAFT AMD 2
10164-9
10164-10
10164-11
10164-12
10164-14
10164-15
10164-16
10164-17
10164-18
10164-19
10164-20
10164-21
10164-22
10165-1
Systems Management: Summarization Function Amendment 2:
Enhanced Scanner Objects 1996
Information Technology - Open Systems Interconnection - Systems
Management: Objects and Attributes for Access Control First
Edition; Technical Corrigendum 1: 12-15-1996; Technical
Corrigendum 2: 11-01-1999
Information Technology - Open Systems Interconnection - Systems
Management: Usage Metering Function for Accounting Purposes
First Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1:
11-01-1999
Information Technology - Open Systems Interconnection - Systems
Management: Metric Objects and Attributes First Edition;
Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999
Information Technology - Open Systems Interconnection - Systems
Management: Test Management Function First Edition; Technical
Corrigendum 1: 10-15-1998; Technical Corrigendum 2: 11-01-1999
Information Technology - Open Systems Interconnection - Systems
Management: Confidence and Diagnostic Test Categories First
Edition; Technical Corrigendum 1:12/15/1999
Information Technology - Open Systems Interconnection - Systems
Management: Scheduling Function First Edition; ITU-T Rec.X.746
1995; Technical Corrigendum 1 06/15/1999
Information Technology - Open Systems Interconnection - Systems
Management: Management Knowledge Management Function First
Edition; Amendment 1:12/15/1998
Information Technology - Open Systems Interconnection - Systems
Management: Change over Function First Edition; ITU-T Rec.X.751
1995; Technical Corrigendum 1 06/15/1999
Information Technology - Open Systems Interconnection - Systems
Management: Software Management Function First Edition; ITU-T
Rec.X.744 1996; Technical Corrigendum 1 06/15/1999
Information Technology - Open Systems Interconnection - Systems
Management: Management Domain and Management Policy
Management Function First Edition
Information Technology - Open Systems Interconnection - Systems
Management: Time Management Function First Edition; ITU-T
Rec.X.743 1998
Information Technology - Open Systems Interconnection - Systems
Management: Command Sequencer for Systems Management First
Edition
Information Technology - Open Systems Interconnection - Systems
Management: Response Time Monitoring Function First Edition
Information Technology - Open Systems Interconnection - Structure
of Management Information: Management Information Model First
Edition; (Corrigendum 1-1994) (AS/NZS 4151.1: 1994) (Amendment
1-1996)
10165-2
10165-2 DRAFT
AMD 2
10165-7
10165-8
10168-1
10165-4
10165-4 DRAFT
AMD 4
10165-5
10165-6
10166-1
10166-2
10168-4
10169-1
Information Technology - Open Systems Interconnection - Structure
of Management Information: Definition of Management Information
First Edition; Technical Corrigendum 1: 09-01-1994; Technical
Corrigendum 2: 12-15-1996; Technical Corrigendum 3: 10-15-1999
(Draft)Information Technology - Open Systems Interconnection Structure of Management Information: Definition of Management
Information Amendment 2: Enhanced Event Control 1996
Information Technology - Open Systems Interconnection - Structure
of Management Information: General Relationship Model First
Edition
Information Technology - Open Systems Interconnection - Structure
of Management Information: Managed Objects for Supporting Upper
Layers First Edition
Information Technology - Open Systems Interconnection Conformance Test Suite for the Session Protocol - Part 1: Test Suite
Structure and Test Purposes First Edition
Information Technology - Open Systems Interconnection - Structure
of Management Information: Guidelines for the Definition of
Managed Objects First Edition; Amendment 1: 08/01/1996;
Corrigendum 1: 12/15/1996; Amendment 2: 12/15/1998 and
Amendment 3: 12/15/
(Draft)Information Technology - Open Systems Interconnection Structure of Management Information: Guidelines for the Definition
of Managed Objects Amendment 4: GDMO+: Specifying the
Behaviour of Managed Objects 1997
Information Technology - Open Systems Interconnection - Structure
of Management Information: Generic Management Information First
Edition; Technical Corrigendum 1: 12/15/1998
Information Technology - Open Systems Interconnection - Structure
of Management Information: Requirements and Guidelines for
Implementation Conformance Statement Proformas Associated with
OSI Management Second Edition
Information Technology - Text and Office Systems - Document
Filing and Retrieval (DFR) - Part 1: Abstract Service Definition and
Procedures First Edition; Corrigendum 1-1994; Corrigendum 2-1994;
Corrigendum 3-1994; Corrigendum 4-1998; Amendment 1-1995;
Ame
Information Technology - Text and Office Systems - Document
Filing and Retrieval (DFR) - Part 2: Protocol Specification First
Edition; (Corrigendum 1-1994) (Corrigendum 2-1995) (Amendment
1-1995) (AS/NZS 4167.2: 1994) (Amendment 2-1996)
Information Technology - Open Systems Interconnection Conformance Test Suite for the Session Protocol - Part 4: Test
Management Protocol Specification First Edition
Information Technology - Open Systems Interconnection Conformance Test Suite for the ACSE Protocol - Part 1: Test Suite
10170-1
TR 10172
TR 10171
10173
10175-1
10179
10180
10181-1
10177
10181-2
10181-3
10181-4
10181-5
10181-6
Structure and Test Purposes First Edition; AS/NZS 4150.1: 1993
Information Technology - Open Systems Interconnection Conformance Test Suite for the FTAM Protocol - Part 1: Test Suite
Structure and Test Purposes First Edition (AS/NZS 4218.1: 1994)
Information Technology - Telecommunications and Information
Exchange Between Systems - Network/Transport Protocol
Interworking Specification First Edition; AS/NZS 4104: 1993
Information Technology - Telecommunications and Information
Exchange Between Systems - List of Standard Data Layer Link
Protocols that Utilize High-Level Data Link Control (HDLC) Classes
of Procedures, List of Standard XID Format Identifiers, List of Stand
Information Technology - Telecommunications and Information
Exchange between Systems - Interface Connector and Contact
Assignments for ISDN Primary Rate Access Connector Located at
Reference Points S and T Second Edition
Information Technology - Text and Office Systems - Document
Printing Application (DPA) - Part 1: Abstract Service Definition and
Procedures First Edition; Technical Corrigendum 1: 07/01/1998;
Technical Corrigendum 2: 11/15/1998; Technical Corrigendum 3: 12
Information Technology - Processing Languages - Document Style
Semantics and Specification Language (DSSSL) First Edition;
Corrigendum 1: 03-01-2001
Information Technology - Processing Languages - Standard Page
Description Language (SPDL) First Edition; Corrigendum 1:
10/15/2001
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Overview First Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Provision of the Connection-Mode
Network Internal Layer Service by Intermediate Systems Using
ISO/IEC 8208, the X.25 Packet Layer Protocol First Edition;
AS/NZS 4217: 19
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Authentication Framework First
Edition
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Access Control Framework First
Edition
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Non-Repudiation Framework First
Edition
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Confidentiality Framework First
Edition
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Integrity Framework First Edition
10181-7
TR 10182
TR 10183-1
TR 10183-2
DIS 10192- 1.2
TR 10192-2
10206
10279
10367
10373-1
10373-2
10373-3
10373-5
10373-6
10373-7
10514-1
10514-2
10514-3
10536-1
10536-2
Information Technology - Open Systems Interconnection - Security
Frameworks for Open Systems: Security Audit and Alarms
Framework First Edition
Information Technology - Programming Languages, Their
Environments and System Software Interfaces - Guidelines for
Language Bindings First Edition
Information Technology - Text and Office Systems - Office
Document Architecture (ODA) and Interchange Format - Technical
Report on ISO 8613 Implementation Testing - Part 1: Testing
Methodology First Edition
Information Technology - Text and Office Systems - Office
Document Architecture (ODA) and Interchange Format - Technical
Report on ISO 8613 Implementation Testing - Part 2: Framework for
Abstract Test Cases First Edition
(Draft)Information Technology - Home Electronic System (HES) Part 1: Introduction ***CD-ROM ONLY***
Information Technology - Home Electronic System (HES) Interfaces
- Part 2: Simple Interface Type 1 First Edition
Information Technology - Programming Languages - Extended
Pascal First Edition
Information Technology - Programming Languages - Full BASIC
First Edition; (Amendment 1-1994)
Information Technology - Standardized Coded Graphic Character
Sets for Use in 8-Bit Codes Technical Corrigendum 1:06/01/2001
Identification Cards - Test Methods - Part 1: General Characteristics
Tests First Edition
Identification Cards - Test Methods - Part 2: Cards with Magnetic
Stripes First Edition
Identification Cards - Test Methods - Part 3: Integrated Circuit(s)
Cards with Contacts and Related Interface Devices First Edition
Identification Cards - Test Methods - Part 5: Optical Memory Cards
First Edition
Identification Cards - Test Methods - Part 6: Proximity Cards First
Edition
Identification Cards - Test Methods - Part 7: Vicinity Cards First
Edition
Information Technology - Programming Languages - Part 1: Modula2, Base Language First Edition
Information Technology - Programming Languages - Part 2: Generics
in Modula-2 First Edition
Information Technology - Programming Languages - Part 3: Object
Oriented Modula-2 First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards - CloseCoupled Cards - Part 1: Physical Characteristics Second Edition
Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2:
Dimensions and Location of Coupling Areas First Edition
10536-3
10538
10561
10588
ISP 10607-1
ISP 10607-2
ISP 10607-3
ISP 10607-4
10589
10589: FDAM 3
ISP 10607-5
ISP 10607-6
ISP 10608-1
FDISP 10611-1
Identification Cards - Contactless Integrated Circuit(s) Cards - Part 3:
Electronic Signals and Reset Procedures First Edition
Information Technology - Control Functions for Text
Communication First Edition
Information Technology - Office Equipment - Printing Devices Method for Measuring Throughput - Class 1 and Class 2 Printers
Second Edition
Information Technology - Use of X.25 Packet Layer Protocol in
Conjunction with X.21/X.21 bis to Provide the OSI ConnectionMode Network Service First Edition; (CCITT RECMN X.613)
Information Technology - International Standardized Profiles AFTnn
- File Transfer, Access and Management - Part 1: Specification of
ACSE, Presentation and Session Protocols for the Use by FTAM
Second Edition
Information Technology - International Standardized Profiles AFTnn
- File Transfer, Access and Management - Part 2: Definition of
Document Types, Constraint Sets and Syntaxes Second Edition
Information Technology - International Standardized Profiles AFTnn
- File Transfer, Access and Management - Part 3: AFT11 - Simple
File Transfer Service (Unstructured) Second Edition
Information Technology - International Standardized Profiles AFTnn
- File Transfer, Access and Management - Part 4: AFT12 - Positional
File Transfer Service (Flat) Second Edition
Information Technology - Telecommunications and Information
Exchange Between Systems - Intermediate System to Intermediate
System Intra-Domain Routeing Information Exchange Protocol for
Use in Conjunction with the Protocol for Providing the
Connectionless(Draft)Information Technology - Telecommunications and
Information Exchange between Systems - Intermediate System to
Intermediate System Intra-Domain Routeing Information Exchange
Protocol for Use in Conjunction with the Protocol for Providing the
Connecti
Information Technology - International Standardized Profiles AFTnn
- File Transfer, Access and Management - Part 5: AFT22 - Positional
File Access Service (Flat) Second Edition
Information Technology - International Standardized Profiles AFTnn
- File Transfer, Access and Management - Part 6: AFT3 - File
Management Service Second Edition
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 1: General Overview and SubnetworkIndependent Requirements First Edition; Amendment 1-1998
(Draft)Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 1:
MHS Service Support
ISP 10611-1
FDISP 10611-5
ISP 10608-2
ISP 10608-2
DRAFT AMD 1
ISP 10608-4
ISP 10608-4
DRAFT AMD 1
ISP 10608-5
ISP 10608-6
ISP 10608-6
DRAFT AMD 1
ISP 10608-5
DRAFT AMD 2
ISP 10608-7
Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 1:
MHS Service Support Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 5:
AMH13 - MS Access (P7)
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 2: TA51 Profile Including SubnetworkDependent Requirements for CSMA/CD Local Area Networks
(LANs) First
(Draft)Information Technology - International Standardized Profile
TAnnnn - Connection-Mode Transport Service over ConnectionlessMode Network Service - Part 2: TA51 Profile Including SubnetworkDependent Requirements for CSMA/CD Local Area Networks
(LANS)
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 4: Definition of Profile TA53, Operation over
a Token Ring LAN Subnetwork First Edition
(Draft)Information Technology - International Standardized Profile
TAnnnn - Connection-Mode Transport Service over ConnectionlessMode Network Service - Part 4: Definition of Profile TA53,
Operation over a Token Ring LAN Subnetwork Amendment 1:
Addition of
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 5: TA1111/TA1121 Profiles Including
Subnetwork-Dependent Requirements for X.25 Packet-Switched Data
Netwo
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 6: Definition of Profile TA54, Operation over
an FDDI LAN Subnetwork First Edition
(Draft)Information Technology - International Standardized Profile
TAnnnn - Connection-Mode Transport Service over ConnectionlessMode Network Service - Part 6: Definition of Profile TA54,
Operation over an FDDI LAN Subnetwork Amendment 1: Addition
of Syst
(Draft)Information Technology - International Standardized Profile
TAnnnn - Connection-Mode Transport Service over ConnectionlessMode Network Service - Part 5: TA1111/TA1121 Profiles Including
Subnetwork-Dependent Requirements for X.25 Packet-Switched Dat
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 7: Security Employing the Network Layer
ISP 10608-8
ISP 10611-5
FDISP 10611-6
ISP 10615-4
ISP 10608-12
ISP 10608-13
ISP 10608-14
ISP 10609-1
ISP 10609-2
ISP 10609-3
ISP 10609-4
Security Protocol - Connectionless-Mode for TAnnnn Profiles First
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 8: Security Employing the Network Layer
Security Protocol - Connection-Mode with SDT-PDU Based
Protection
Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 5:
AMH13 - MS Access (P7) Second Edition
(Draft)Information Technology - International Standardized Profiles
AMH1n - Message Handling Systems - Common Messaging - Part 6:
AMH15 MS 94 Access (P7)
Information Technology - International Standardized Profiles ADInn
- OSI Directory - Part 4: ADI22 - DSA Invoker Role First Edition
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 12: MAC Sublayer and Physical Layer
Dependent Requirements for a CSMA/CD LAN Subnetwork First
Edition
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 13: MAC Sublayer and Physical Layer
Dependent Requirements for a Token Ring LAN Subnetwork First
Edition
Information Technology - International Standardized Profile TAnnnn
- Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 14: MAC, PHY and PMD Sublayer
Dependent and Station Management Requirements over an FDDI
LAN Subnetwork F
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 1: Subnetwork-Type
Independent Requirements for Group TB First Edition; AS/NZS
4170.1: 1994
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 2: Subnetwork-Type
Independent Requirements for Group TC First Edition; AS/NZS
4170.2: 1994
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 3: Subnetwork-Type
Independent Requirements for Group TD First Edition; AS/NZS
4170.3: 1994
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
ISP 10609-5
DISP 10609-5
DRAFT AMD 1
ISP 10609-6
DISP 10609-6
DRAFT AMD 1
ISP 10615-5
ISP 10615-6
ISP 10616
10641
ISP 10609-7
DISP 10609-7
DRAFT AMD 1
ISP 10609-8
Connection-Mode Network Service - Part 4: Subnetwork-Type
Independent Requirements for Group TE First Edition; AS/NZS
4170.4: 1994
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 5: Definition of Profiles
TB1111/TB1121 First Edition; AS/NZS 4170.5: 1994
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 5: Definition of Profiles
TB1111/TB1121 Amendment 1: Addition of Management
Requirements 1
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 6: Definition of Profiles
TC1111/TC1121 First Edition; AS/NZS 4170.6: 1994
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 6: Definition of Profiles
TC1111/TC1121 Amendment 1: Addition of Management
Requirements 1
Information Technology - International Standardized Profiles ADInn
- OSI Directory - Part 5: ADI31 - DUA Support for Distributed
Operations First Edition
Information Technology - International Standardized Profiles ADInn
- OSI Directory - Part 6: ADI32 - DSA Support for Distributed
Operations First Edition
Information Technology - International Standardized Profile FDI11 Directory Data Definitions - Common Directory Use (Normal) First
Edition
Information Technology - Computer Graphics and Image Processing
- Conformance Testing of Implementations of Graphics Standards
First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 7: Definition of Profiles
TD1111/TD1121 First Edition; AS/NZS 4170-7: 1994
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 7: Definition of Profiles
TD1111/TD1121 Amendment 1: Addition of Management
Requirements 1
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 8: Definition of Profiles
TE1111/TE1121 First Edition; AS/NZS 4170.8: 1994
DISP 10609-8
DRAFT AMD 1
ISP 10609-10
ISP 10609-15
ISP 10609-9
ISP 10609-14
DISP 10609-14
DRAFT AMD 1
DISP 10609-15
DRAFT AMD 1
10646-1
10733
ISP 10609-16
ISP 10609-17
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 8: Definition of Profiles
TE1111/TE1121 Amendment 1: Addition of Management
Requirements 1
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 10: LAN SubnetworkDependent, Media-Independent Requirements First Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 15: Definition of Profile
TC54, Provision of the OSI Connection-Mode Transport Service
Using the
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 9: Subnetwork-Type
Dependent Requirements for Network Layer, Data Link Layer and
Physical Layer C
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 14: Definition of Profile
TC53, Provision of the OSI Connection-Mode Transport Service
Using the
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 14: Definition of Profile
TC53, Provision of the OSI Connection-Mode Transport Service Usi
(Draft)Information Technology - International Standardized Profiles
TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 15: Definition of Profile
TC54, Provision of the OSI Connection-Mode Transport Service Usi
Information Technology - Universal Multiple-Octet Coded Character
Set (UCS) - Part 1: Architecture and Basic Multilingual Plane Second
Edition
Information Technology - Elements of Management Information
Related to OSI Network Layer Second Edition
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 16: Security Employing the
Network Layer Security Protocol - Connection-Mode with NoHeader, for
Information Technology - International Standardized Profiles TB,
TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 17: Security Employing the
Network Layer Security Protocol - Connection-Mode, with SDT-
60050-131
60050-521
60061-1
60061-3
60073
60076-4
60079-10
60081
60127-4
60191-6-12
60269-2-1
60287-1-3
60313
60317-27
60325
60335-1
60335-2-2
60335-2-89
60335-2-90
60352-1
60353
60364-5-53
60364-5-54
60364-5-55
60364-5-56
60364-7-712
60399
60400
60417-1
60417-2
60470
60519-6
60598-2-20
60601-2-1
60601-2-33
60603-7-7
60626-3
60669-2-2
60684-3-211
60684-3-240 TO
243
60684-3-300
60684-3-320
60684-3-343 TO
PDU Based
International Electrotechnical Vocabulary - Part 1
International Electrotechnical Vocabulary Chapter
"Lamp Caps and Holders Together with Gauges for th
"Lamp Caps and Holders Together with Gauges for th
"Basic and Safety Principles for Man-Machine Inter
Power Transformers-Part 4: Guide to the Lightning
Electrical Apparatus for Explosive Gas Atmospheres
Double-Capped Fluorescent Lamps - Performance Spec
Miniature Fuses - Part 4: Universal Modular Fuse-L
Mechanical Standardization of Semiconductor Device
Low-Voltage Fuses - Part 2-1: Supplementary Requir
Electric Cables - Calculation of the Current Ratin
Coaxial Connectors Used in Nuclear Laboratory Inst
Specifications for Particular Types of Winding Wir
"Radiation Protection Instrumentation - Alpha
Household and Similar Electrical Appliances - Safe
Household and Similar Electrical Appliances - Safe
Household and Similar Electrical Appliances - Safe
Household and Similar Electrical Appliances - Safe
"Solderless Connections - Part 1: Wrapped Connecti
Line Traps for A.C. Power Systems Second Edition;
"Electrical Installations of Buildings - Part 5-53
"Electrical Installations of Buildings - Part 5-54
Electrical Installations of Buildings - Part 5-55:
Electrical Installations of Buildings - Part 5: Se
Electrical Installations of Buildings - Part 7-712
Standard Sheets for Barrel Thread for E14 and E27
Lampholders for Tubular Fluorescent Lamps and Star
Graphical Symbols for Use on Equipment - Part 1: O
Graphical Symbols for Use on Equipment - Part 2: S
High-Voltage Alternating Current Contactors and Co
Safety in Electroheat Installations Part 6: Specif
Luminaires - Part 2-20: Particular Requirements Medical Electrical Equipment - Part 2-1: Particula
Medical Electrical Equipment - Part 2-33: Particul
"Connectors for Electronic Equipment - Part 7-7: D
Combined Flexible Materials for Electrical Insulat
Switches for Household and Similar Fixed Electrica
"Flexible Insulating Sleeving - Part 3: Specificat
Flexible Insulating Sleeving - Part 3: Specificati
"Flexible Insulating Sleeving - Part 3: Specificat
"Flexible Insulating Sleeving - Part 3: Specificat
"Flexible Insulating Sleeving - Part 3: Specificat
345
60684-3-400 TO
402
60684-3-403 TO
405
60684-3-420 TO
422
60688
60695-1-30
60695-10-3
60730-2-4
60731
60747-5-1
60747-16-3
60748-1
60748-23-1
60748-23-2
60748-23-3
60748-23-4
60749-12
60846
60862-2
60884-1
TR 61000-1-3
TR 61000-3-5
TR 61000-5-6
61008-1
61111
61112
61207-3
61229
61243-2
61340-2-1
TS 61370
61377-2
61477
61479
61481
61537
61559-2
61672-1
61674
61937-7
62011-1
PASS 62272-1
Flexible Insulating Sleeving - Part 3: Specificati
Flexible Insulating Sleeving - Part 3: Specificati
Flexible Insulating Sleeving - Part 3: Specificati
Electrical Measuring Transducers for Converting a.
Fire Hazard Testing - Part 1-30: Guidance for Asse
Fire Hazard Testing - Part 10-3: Abnormal Heat - M
Automatic Electrical Controls for Household and Si
Medical Electrical Equipment - Dosimeters with Ion
Discrete Semiconductor Devices and Integrated Circ
Semiconductor Devices - Part 16-3: Microwave Integ
Semiconductor Devices - Integrated Circuits - Part
Semiconductor Devices - Integrated Circuits - Part
Semiconductor Devices - Integrated Circuits - Part
Semiconductor Devices - Integrated Circuits - Part
Semiconductor Devices - Integrated Circuits - Part
"Semiconductor Devices - Mechanical and Climatic T
"Radiation Protection Instrumentation - Ambient an
Surface Acoustic Wave (SAW) Filters of Assesses Qu
Plugs and Socket-Outlets for Household and Similar
Electromagnetic Compatibility (EMC) - Part 1-3: Ge
Electromagnetic Compatibility (EMC) - Part 3: Limi
Electromagnetic Compatibility (EMC) - Part 5-6: In
Residual Current Operated Circuit-Breakers without
Matting of Insulating Material for Electrical Purp
Blankets of Insulating Material for Electrical Pur
Gas Analyzers - Expression of Performance - Part 3
Rigid Protective Covers for Live Working on a.c. I
Live Working - Voltage Detectors - Part 2: Resisti
Electrostatics - Part 2-1: Measurement Methods - A
Steam Turbines - Steam Purity First Edition
Railway Applications - Rolling Stock - Combined Te
"Live Working - Minimum Requirements for the Utili
Live Working - Flexible Conductor Covers (Line Hos
Live Working - Portable Phase Comparators for Use
Cable Tray Systems and Cable Ladder Systems for Ca
"Radiation in Nuclear Facilities - Centralized Sys
Electroacoustics - Sound Level Meters - Part 1: Sp
Medical Electrical Equipment - Dosimeters with Ion
Digital Audio - Interface for Non-Linear PCM Encod
"Insulating Materials - Industrial
Digital Radio Mondiale (DRM) - System Specificatio
TR 62291
1539-1
7816-3
8326
8327-1
Multimedia Data Storage - Application Program Inte
Information Technology - Programming Languages - F
Information Technlogy - Identification Cards - Int
Information Technology - Open Systems Interconnect
Information Technology - Open Systems Interconnect