MATERIAL SAFETY DATA SHEET
I.
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: L/D #06045 MULTI-USE ENCAPSULANT
TEMP-COAT® Brand Products, LLC
301 W. Airline Hwy., Ste 100
LaPlace, LA 70068
II.
HFR Rating: 1-0-0
(985)651-2911
Date Superceded: January 31, 1995
Date Prepared: January 5, 2001
COMPOSITION/INFORMATION ON INGREDIENTS
This formulation contains no heavy metals.
This formulation contains no SARA title III regulated ingredients.
Hazardous ingredients: None in reportable concentrations per OSHA 29 CFR 1910.1200
III.
HAZARDS INDENTIFICATION
Eye: Can be mild irritant to the eyes. Skin: Can cause slight skin irritation.
Swallowing: Swallowing small amounts of this material during normal handling is not likely to cause harmful
effects. Swallowing large amounts may be harmful (LD50 > 5gm/kg body weight).
Inhalation: Breathing of vapor or mist is possible. Breathing small amounts of this material during normal
handling is not likely to cause harmful effects. Breathing large amounts may be harmful.
Cancer Information: None known.
Other Health Effects: No data.
IV.
FIRST AID MEASURES
Eyes: If irritation develops, flush eyes gently with water for at least 15 minutes. If irritation persists, seek
medical attention.
Skin: Wash exposed area with copious amounts of soap and water. If symptoms persist, seek immediate medical
attention.
Swallowing: Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth;
place individual on the left side with the head down. Contact a physician, medical facility, or poison control
center for advice about whether to induce vomiting. If possible, do not leave individual unattended. Inhalation: If
symptoms develop, immediately move individual away from exposure and into fresh air. If symptoms persist.
seek medical attention.
V.
FIRE FIGHTING MEASURES
Flash Point: None
Flammable Limits: LEL, UEL : N/A
Fire and Explosion Hazards: None known
Extinguishing Media: Not applicable
Fire Fighting Instructions: Not applicable
VI.
ACCIDENTAL RELEASE MEASURES
Spills and/or Release: Use absorbent material or scoop to pick up bulk spills; flush final traces with water.
VII.
HANDLING AND STORAGE
Handling& Storage: Keep container sealed when not in use. Keep from freezing.
L/D #06045 Page 2
VIII.
EXPOSURE CONTROL/PERSONAL PROTECTION
Eye Protection: Chemical splash goggles in compliance with OSHA regulations are advised
Skin Protection: Wear impermeable latex gloves (consult your safety equipment supplier).
Ventilation: Precautions as per normal latex paint spraying activities.
Respiratory Protection: Use NIOHS/MSHA approved respiratory protection if conditions warrant.
Other Protective Clothing/Equipment: Use approved respirators, clothing, etc. when using product for asbestos
encapsulation.
Work Hygienic Practices: Follow all applicable OSHNNIOSH/EPA regulations concerning asbestos health
hazards when using as an asbestos lockdown encapsulant.
IX.
PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: Water - >212.0 F Vapor Pressure: N/A
Specific Gravity: (H20= 1) 1.09
Appearance: White latex
Odor: Latex paint odor
X.
Specific Vapor Density: N/A @ AIR = 1
Evaporation Rate: (Butyl Acetate=l) N/A
State: Liquid
STABILITY AND REACTIVITY
Hazardous Polymerization: Product will not undergo hazardous polymerization.
Hazardous Decomposition: None known
Conditions to A void: Keep from freezing
Chemical Stability: Stable
Incompatibility: None known
XI.
TOXICOLOGICAL INFORMATION
No data
XII.
ECOLOGICAL INFORMATION
No data
XIII.
DISPOSAL CONSIDERATION
Waste Management Information: Place in suitable container for disposal of water based coatings in accordance
with all applicable local, state and federal regulations. For assistance with your waste management needs including disposal', recycling and waste stream reduction, contact Grayling Industries, Inc. at 800-635-1551.
XIV.
OTHER INFORMATION
The information accumulated herein is believed to be accurate but is not warranted to be whether originating
with the company or not. Recipients are advised to confirm in advance of need that the information is current,
applicable, and suitable to their circumstances.