F.NO.P-13022/2/2015/P&C-2
Directorate General of Supplies & Disposals
(P&C Directorate)
Dated: 13.01.2016
Subject:
Comments of stakeholders for conclusion of R/C on Catalogue /
NDP basis by DGS&D.
Presentation / demonstration of products was done by the applicants who
have applied for conclusion of R/C of their products on Catalogue/NDP basis in
front of the Screening Committee on 16-17 December, 2015 at DGS&D, New
Delhi. The deliberations and minutes of the presentation /demonstration are
enclosed below. All the stakeholders are requested to furnish their comments, if
any, to Director (P&C) either through a letter or email (dirpnc@dgsnd.gov.in)
within 15 days from the date of issue of this letter, i.e., by 28.01.2016, failing
which it will be assumed that they have no comments to offer and DGS&D will
proceed on merits of each case.
(Manish Rai Mathur)
Director (P&C)
For Director General of Supplies & Disposals
To All concerned.
F.NO.P-13022/2/2015/P&C-2
Minutes of the Presentation / Demonstration held in front of Screening Committee
on 16.12.2015 and 17.12.2015 under the Chairmanship of ADG (SNS) for R/C on
discount of NDP/Catalogue Price basis.
The following were present:DGS&D
1.
Shri S.N. Srivastava, ADG
In Chair
2.
Shri H.K. Sharma, DDG(S)
3.
Shri A.K. Kamra, DDG(S)
4.
Shri Rajender Kumar, DDG(S)
5.
Shri Nirmal Kumar, Dir (ES)
6.
Shri D. Jha, Dir (OC)
7.
Shri Y.K. Pathak, Dir (ST) & Regional Cell (Mumbai)
8.
Shri Gaurav Sharma, Dir. (MS)
9.
Shri Rajesh Jain, Dir. (HW)
10.
Shri Manish Rai Mathur, Dir. (IT & P&C)
11.
Shri Avik Basu, Dy. Dir. (P&C)
QA Wing
1.
Shri P. Singhal, DDG(QA)
Finance
1.
Shri A. K. Singh, Joint Secretary (IF)
2.
In order to understand the products to be brought on Catalogue / NDP Rate
Contract, technical presentation / demonstration was given by the fifteen applicants at
ISQM Hall, DGS&D on 16th and 17th December, 2015. The presentation was done in
front of the members of Screening Committee. The salient features of the presentation
made by the various applicants / vendors are as under:I. Solar Dustbin by M/s. Pugedon India (Asia), New Delhi (OEM: Pugedon)
The representative of the firm intimated that they have developed a solar
dustbin. This dustbin operates on solar power and also has a battery inside. The
machine has two compartments, one for the recyclable wastes and another for nonrecyclable waste. The novel feature of the machine is when the recyclable waste like
plastic / water bottle, soda bottle, tin cans, paper etc. are thrown in the machine, it
provides a return gift as an incentive. The return gift can be in a form of movie ticket,
metro ticket, re-chargeable coupon of mobile, pencil, pedigree food, toffee, chocolate,
Bisleri water bottle etc. The machine accepts the non-recyclable wastes also but the
return gift is provided only for the recyclable wastes. Each machine has a capability to
accumulate waste of 800 to 1000 bottles. The machine is fitted with sensors which
detect and distinguish between recyclable and non-recyclable wastes. The machine is
made of stainless steel and is powder coated.
The firm’s rep. stated that the task of taking away the accumulated waste from
the machine and distributing the incentive will be done by them. They will deploy
manpower who will collect the wastes from the machine at 6-8 hour interval daily and
F.NO.P-13022/2/2015/P&C-2
also fill up the machine with return gifts. They will arrange for the return gift on the
basis of amount received by selling the recyclable wastes.
They will provide a
warranty of 2 years and the service backup for 10 years. The cost of the machine
including the services rendered is around Rs. 3.5 lakh. The firm’s rep. intimated that
they have not sold a single machine in India as well as Asia. Some machines have been
sold by them in U.S. and Europe. The machines are being manufactured in Turkey.
They have also a patent issued by Turkish Government and have factory in Istanbul.
The Committee asked the firm’s rep. to share the copies of supply orders as received by
them from U.S. and European Governments and also to furnish a copy of the English
translation of the patent. This information is still awaited from them.
II. Chest Compression Unit and Defibrillator by M/s. Medi Waves Inc. ( OEM:
Physio – Control Operations, Netherland, Brand: Lucas)
The firm’s rep.
stated that their chest compression unit gets enabled very
quickly in just 5-10 second. It is based on piston and suction based technology which
enables recoiling and is a USFDA approved machine which is also a proprietary and a
patented product. It helps to give continuous blood supply from heart to brain in the
event of cardiac arrest and helps to revive the patient. They have sold their products to
many prominent hospitals like AIIMS, G. B. Pant Hospital and Apollo-Ludhiana etc.
Their product is different from other leading manufacturers like M/s. Zoll. They have
their chest compression unit only whereas that of M/s. Zoll is integrated product for
chest compressor as well as defibrillator and is quite expensive. Their CPR product has
45 minutes of battery backup and rechargeable, with warranty of 2 years.
As regards defibrillator, the firm mentioned that their defibrillator is of 360
Joule biphasic of Physio Control, Netherland. It is USFDA approved and is very
advantage in case of obese patient compare to conventional 200 Joule defibrillator
manufactured by other companies like Philips, Zoll etc.
III. Sharp Blaster Sterilization Unit by M/s. Adison Equipment Company, New
Delhi (OEM: M/s. Safe Environmental Solutions International Ltd.).
The rep. of the firm intimated that their product has been designed on the
recommendation of WHO and has been duly approved by CPCB after field trials. It is a
device which safely disposes sharp waste like needles, syringes, and blades etc. which
are bio-hazardous.
Their system consists of microprocessor based computerized
sterilization technology having disposable five litre canisters for sharps and soft clinical
waste.
The device processes the waste for up to two and half hours reaching a
temperature of 185° C sterilizing the infectious waste and sealing the canister for safe
disposal. At a high temperature of 185° C, all types of plastics / sharps melt and not
burn. Moreover, all pathogens including HIV are killed. It was also stated that the
same can be disposed of like a normal scrape. The power consumption is very low of
F.NO.P-13022/2/2015/P&C-2
the order of one unit for 150 minutes duration. The device has also ability to maintain
the log of the disposed material. They stated that there is no other manufacturer for this
item which has been approved by CPCB as may be verified from their website. They
also have an optional compactor unit which reduces the size of the final processed waste
by compressing the canister. The rep. of the firm stated that they have sold 200 units in
various Delhi hospitals like AIIMS, G.B. Pant, DDU, LNJP etc.
IV. Cassette Autoclave by M/s. NW Overseas (OEM: M/s. SCICAN Ltd, Canada)
The firm’s rep. stated that Cassette Autoclave is a type of portable autoclave
which because of its portability and small size can be placed in the Operation Theatre
itself and thus high value and delicate instruments need not be carried to the central
autoclave room and can be sterilized in the O.T. itself. It is very useful in case of
sterilization, dentistry and precision ophthalmology discipline etc. It is very fast and in
just 8 minutes, it sterilizes the instrument by attaining temperature of 132° C unlike
other autoclaves which require 45 minutes cycle time, the cassette autoclave is unique
as it subsequently reduced the cycle time. The device uses a steam generator which
heats to the optimum temperature and defined volume of distilled water is pumped in
and converted to steam. Then steam is injected into pressure chamber and cassette
which contains the instruments to be sterilized. Air is purged as the steam courses
through the cassette and is continuously expelled into a condenser of flask. After the
cycle is completed, a small air pressure switches on, drying and cooling the instrument
rapidly. The equipment is USFDA approved and the approx. cost is around of Rs. 8.8
lakhs. The firm reps. intimated that they have already sold this equipment to Govt. of
Uttrakhand and in Gwalior.
V. Cyphenothrin 5% EC (Insecticide) by M/s. Sumitomo Chemical India Pvt. Ltd.
(OEM: Sumitomo Chemical)
The firm’s rep. intimated that their product is highly effective on Ants,
Cockroaches, Flies, Mosquitoes and kills them. It is a professional vector controlled
spray with special spray concentration. It can be used as an in-door spray and for outdoor fogging purposes also. It has got a unique formulation and can be mixed with both
water/diesel/kerosene. It has got very low human toxicity. The specifications have
been laid down by BIS. It has been recommended by WHO. The product is as per IS
specification and has been approved by CIB after conduction of human safety test. The
field trials also have been conducted by ICMR. The product is duly approved by
Technical Advisory Committee of M/o. Health & Family Welfare and has also been
approved for inclusion in the NVBDCP programme by M/o. Health & Family Welfare.
The approx. price is Rs. 1350/- per litre.
F.NO.P-13022/2/2015/P&C-2
VI. Fire Extinguisher (Foam/powder based) by M/s. Aska Equipment Ltd. (OEM:
M/s. Aska)
The firm’s rep. intimated that this fire extinguisher uses foam/powder.
It is
made up of high density polyethylene weaved Kevlar body which is extremely
tough and yet very light. It is corrosion free and 100% recyclable.
The weight of
the cylinder is 40% less than the conventional metallic cylinders. The complete
unit is a single unit without any welding. They have obtained the technology
transfer from a British firm. The life of the fire extinguisher is 20 year with 10
year warranty. They intimated that they are the only one who are manufacturing
and selling such type of product in India.
VII. De-contamination Liquid for Toxic Gases (Easy Decon DF 200) by M/s. Viraj
Clean Sea Enterprises Pvt. Ltd. (OEM: M/s. Intelgard Inc. USA)
The rep. of the firm intimated that their product Easy Decon DG200 is a safe,
highly effective, inherently biodegradable, full-spectrum solution designed by
Sandia National Laboratories for Chemical and Biological Decontamination.
Easy Decon is designed to offer unprecedented versatility and is deployable as a
liquid, fog or foam using any number of industry standard commercial applicators.
It is especially effective when deployed by compressed air foam systems (CAFS).
Its salient features are :i.
It is environmentally friendly.
ii.
Non-hazardous for storage and transport.
iii.
Stable with long shelf life.
iv.
of Low corrosivity.
v.
Non-hazardous to personal and individual protective equipment (IPE)
vi.
Logistically advantageous.
vii.
Deployable in different forms.
The firms’ rep. stated that it has not been sold as yet in India but it is required by
Defence, NDMA etc. They have been granted US patent.
VIII. Penergetic-t/Penergetic-P/Penergetic-K by M/s. Trinity Agro Impex Pvt. Ltd.
(OEM: M/s. Penergetic International AG, Switzerland)
The firms’ rep. stated that their OEM M/s. Penergetic is a Switzerland based
company. They have developed organic product for enhancing the fertility of soil,
plants and improve the health of animals and increase the yield of milk. These products
are called as Jeevan Bhumi, Jeevan Vanaspati and Jeevan Pashudhan. These products
are based on herbs, minerals and calcium carbonate.
F.NO.P-13022/2/2015/P&C-2
IX. Dynamic Telepresence System by M/s. Business Octane Solutions (P) Ltd,
Gurgaon (OEM: M/s. Business Octane Solutions)
The firms’ rep. intimated that they have developed a solution which is 1000% to
4000% more effective than ordinary video teleconferences. It can also increase an
organization’s teaching and training pace by up to 300% without increasing the size of
faculty.
Their product is different from video conferencing which has following
limitations:i.
a video conferencing system is just around 10% effective as far participants
appear much smaller from their actual size.
ii.
In a multi location meeting, members appear as stamp size heads.
iii.
Lack of eye contact and hand movement.
iv.
Challenges in sharing desktop, explaining from a whiteboard or from
documents.
v.
Smudgy audio & video quality.
vi.
Inability to join a meeting without IT assistance.
However, in their system, all the participants at all the locations see all the other
participants at all times along with seeing the current speaker life like and life size as if
he is just sitting in front of them at a distance of 10 to 15 feet. This is one of its kind in
the world. This Telepresence system can support up to 33 locations in immersive
telepresence experience which nobody else can in the world unlike the system of M/s
Cisco & M/s Polycom which support very few users in telepresence. It is easier to use
than a cell phone. They have two selling plans regarding telepresence:i.
The complete room /training room along with the complete system to be
designed and constructed by the customer.
ii.
Per hour option in which the complete room/training room, telepresence
system bandwidth are provided by the firm and the user is charged on
per hour basis.
X. Cloud based Video Conferencing) by M/s. Uneecops Technologies Ltd, New
Delhi (OEM: M/s. Lifesize).
The rep. of M/s. Lifesize stated that their product is based on Cloud Technology.
In their system, MCUs are not required. Therefore, there is a lot of financial saving to
the user department as MCUs are very expensive. Their system is simple and easy to
use. Any user can download their App on mobile/laptop/desktop or tablet and operate
through that with the single click. The user has also an option to record the video
conferencing at his server or in the cloud. The subscription charges are based on the
usage of cloud capacity. All the major organizations in developed countries are using
this system. The changes are on the basis of per user.
F.NO.P-13022/2/2015/P&C-2
XI.
Rework Station by M/s. Agmatel India Pvt. Ltd. (OEM: M/s. Weller Tools,
Germany)
The firm’s rep. intimated that this is highly precise rework station which does
soldering, de-soldering and hot air tasks of minute and small component. Its salient
features are:•
All-in-one-Station: Every soldering application can be done with this station –
soldering, desoldering and hot air tasks.
•
Ownership - with 1 station is used instead of 3 units.
•
•
Heating Technology: Fast reaction time, fast heating up time with active tips and
power response tips.
Motion Sensor in tools: Integrated motion sensor for standby mode.
Saves energy automatically. Standby function of connected tools and fume
extractions Movie: http://youtu.be/jzfFu_LgCXk e Low costs of ownership due
to increased lifetime of soldering tips, heating elements and filters.
No need of an expensive Stop & Go safety rest due to standby function.
•
Backlit graphic display supporting multilingual operating interface.
•
Fast, intuitive & multi-lingual display, saves process control and less risk of
failure.
•
Time saving at workplace, better performance of operator.
•
ESD Safe Touch sense Control Controlling of parameters by screen touch &
rotatory joystick free from button operation.
•
•
They also presented another product fume extraction product which is to be used
along with the rework station. As the name suggest this item removes all the toxic
fumes from the work bench. They intimated that they have supplied around 850 unit
worth Rs. 12 Cr. to Indian Army in last one to two years. Defence Forces, HAL,
Ordinance Factories etc., are the user departments who require this product.
XII. Multi Product Calibrator by M/s. Agmatel India Pvt. Ltd (OEM: M/s. Fluke)
The reps. of the M/s. Agmatel and M/s. Fluke gave a presentation for their
following products relating to calibration:
Multiproduct Calibrator Model 5522A:- to calibrate a variety of Electrical
test tools like DMM’s Clamps, Power Meters, process Calibrators etc.
RF Calibration System Model 96270A:- to calibrate RF instruments like
Spectrum Analyzers, Modulation meters, Measurement receivers, Counters, RF
Attenuators and components.
Dedicated Multichannel Scope Calibrator Model 9500B:- fully automated
Scope Calibrator up to 6GHZ.
Reference DMM Model 8508A:- for verifying the performance of the
Calibrators.
The unique features of these devices are as under:
F.NO.P-13022/2/2015/P&C-2
Unique features of RF Calibration system

Eliminates an array of products to just one unit.

Frequency Range starting from 1 mHZ which helps to function as a precise
function generator in Calibration applications..

Level resolution of 0.001db which is very critical for Power sensor Calibration.

Very low phase noise of -144dbc to calibrate high performance Spectrum
Analyzers
Unique features of Automated High Frequency Scope Calibrator

The only Calibrator that can calibrate oscilloscopes from 2 GHZ to 6.2GHZ – 25
pico Seconds rise time. Only Calibrator in the market today dedicated for Scope
Cal

Multiple outputs ( 5 channels) to calibrate a multichannel Scopes hands free and
automated – deskills operator and reduces Cal time significantly

Unique and patented Active head technology ensures that High frequency
signals are at the tip of the oscilloscope – No cable losses

Variable Levelled Sine Amplitude from 5mV to 5V to check the Scope amplifier
to their most sensitive ranges
Unique features of Multiproduct Calibration system

Only Calibrator that can calibrate all the Fluke Handhelds and Bench DMM’s as
well as Keysight ( formerly Agilent) – due to the design – No other Calibrator
can calibrate Agilent 34401A, 34410A, 34411A, 34420A, Fluke 8845A, Fluke
8846A, Fluke 8808A, Fluke 287, 289, 177, 179, 789, 87V, 88V

400mH of inductive loading spec to drive Analogue DMM’s – which is used in
various government labs

Can calibrate 11 different type of Thermocouples
Unique features of Reference Multi Meter

20 Amps current measurement capability in 8.5 digit DMM class- for Calibrator
Calibration by avoiding shunts

1050 V rms measurement in 8.5 digit class- used for Calibrator Calibration

Resistance up to 20 Giga ohms with 10nano ohms resolution – needed for
Calibrator Calibration

Two channel ratio reference measurement – for comparing DC to DC, AC to
AC, DC to AC, Resitance to Temperature and Temperature to Temperature –
unique for Calibrator Calibration.
The reps. Of the firm stated that there is a huge demand for these items from
Army, Air Force, Navy, Scientific Laboratories like physical labs, DRDO etc. They
also stated that after M/s. Fluke acquired the M/s. Wave Tech in the year 2000, they are
the only company who is making these products worldwide.
F.NO.P-13022/2/2015/P&C-2
XIII. Knuckle Boom Cranes by M/s. Lifemark Udyog Pvt. Ltd., Gurgaon (OEM:
M/s. Lifemark Udyog)
The firm’s rep. stated that their product Boom Cranes are truck mounted. These
are required by Municipalities, Electricity Boards, Power Plants and Disaster
Management etc. for installation and erection of poles in disaster management.
This Item is required by the following departments:










Defense Organizations (Army, Navy, IAF, BRO, OF, etc.)
Municipal Corporations/ Cantonment Boards
Ministry of Consumer Affairs (Legal Metrology Dept.)
Electricity Boards
Forest Department
Irrigation Department
Disaster Management Organizations
Police & Paramilitary Forces
Coal, Steel, Power & Oil PSU’s
Railways
The unique features of these cranes are as under:








Collinear (In-Line) Boom Geometry
Dual Hydraulic Cylinders to lift main boom
360 degree continuous Slew
Elevated Controls
Hydraulic Outriggers 4 nos.
Boom & Stabilizers Interlock Mechanism
Electronic Auto Leveling
Slew Control Mechanism
Detachable Log Grab for handling trees/ branches, handling of electrical poles
etc.
 Auger upto 1000 mm Dia for earth drill work for mounting of electric poles,
construction poles etc.
 LIFTMAK Cranes are also supplied with Winged Bodies, hydraulically
operable, carrying calibrated Weights.
XIV. Portable Compact Mobile Lab by M/s.Accuster Technologies Pvt. Ltd.
(OEM: M/s. Accuster Technologies)
The firm’s rep. stated that their portable lab is rugged, adoptable Indian climate
and contains miniaturise analyzers. The miniature analyzers are of low weight of the
size of credit card and they work in all types of environment without any recalibration.
The power consumption is nearly 1/20 of the conventional lab. It can perform 36 blood
tests currently. The blood sample is taken in small centrifuge tubes which are much
cheaper than tubes used in any conventional lab. They have also bike mountable model.
They have a valid DGS&D R/C for this item which is valid upto 18.01.2016. The
unique features for the portable compact lab as stated by them are as under:
Portable

Rugged Analyzer

Temperature Stability

Low Power Consumption
F.NO.P-13022/2/2015/P&C-2



Less Chemical Consumption
Highly Accurate and Linearity upto 4 times.
Power Backup – 4 Hours extendable to 24 Hours.
The unique features of the Miniature Analyser are as under:-







Lightest in weight
Memory of 3000 Reports
Less Regent Consumption.
Low Power Consumption.
Highly Accurate and Linearity upto 4 times.
20 times more life compare to present analyzers.
Stable Performance
o It is more precise and accurate.
o Internal Thermal Sensitive Printer.
The lab also has the following additional features:
Satellite Control: Switching off labs from remote distance.
Instant Test Reporting.
Real Time Data Transfer to Hqrs. during field testing.



XV.
Zero Water Wastage Solar Hybrid Powered Water Filtrating Unit by M/s.
Newtegh Design Technologies Pvt. Ltd. (OEM: M/s. M/s. Green Power
Resource Management)
The rep. of the firm stated that the Solar Water Filtration System designed by
them uses Solar Power which is environmental friendly and provides quality water
output as per WHO / BIS / EPA standards without any water wastage. The product
features are as under:Design Features Different & Unique
 The unit offers compact and modular size not available in the market for
comparative filtration capacities.
 Despite the compact design the unit is rugged and military grade for airborne,
land based, etc. delivery options to remote location like disaster sites.
 The unit is designed to be Energy Efficient by making operation possible using
minimal power, AC/DC hybrid power option.
 The system requires less than 50% spaces required by comparative capacity
units using existing filtration technologies.
 The above features are unique developed over extensive R&D to meet the tough
conditions of defense forces in adverse locations around the world.
 The unit offers 100% recovery rate along with WHO quality output water for
any raw water having upto 5000 ppm TDS.
 The system offers solar hybrid power options using wind, battery, grid power,
etc. with automatically changer over between the options as per availability.
The purification flow chart is as under:-
F.NO.P-13022/2/2015/P&C-2
Purification Process Flow Chart:
FEED WATER
CLEAN DRINKING WATER
1st stage is centrifugal force based filter 8th stage (optional) is chlorination for
larger sediment, dust, particles, etc.
storage water requirement to keep the
water disinfected.
2nd stage is a 10 micron sediment filter
for dirt & debris.
3rd stage is a filter media for removing
fine
particulates
&
metallic
compounds.
7th stage is Ultra Violet light to kill left
over germs, microbes, etc.
6th stage is anti-bacterial (0.03 micron)
and anti-viral (0.01 micron) filters for
removing bacteria, cyst, E.Coli, virus,
etc.
4th stage is activated carbon media for 5th stage is a filter media to removes any
left-over
chemical
and
metals
removing organic contaminations.
contaminations.
3.
Minutes of the presentation concluded.
4.
The above minutes may be put up on DGS&D website for 15 days to obtain the
comments of all the stakeholders.