HWIC Solutions Cable Solutions for Cisco® High-Speed WAN Interface Cards Custom Cable’s HWIC Cable and Patching Solutions offer flexible and economical connectivity options when connecting Cisco’s HWIC asynchronous modules to network elements. customcable.com Corporate Office 3221 Cherry Palm Dr. Tampa, FL 33619 Tel 813.623.2232 Fax 813.623.3534 Solutions include straight cabling alternatives to Cisco’s standard offering of cables and patching options, Custom High Density patch panel solutions, and conversion cables from legasy Cisco interface cards to the new HWIC high density connector configurations. Applications Cisco 1800, 1900, 2800, 2900, 3800 and 3900 Series Integrated Services Routers (ISRs) WAN Interface Cards HWIC-4T, HWIC-4A/S, HWIC 8A, HWIC 16A, HWIC 8A/S232, SM32A HWIC-4T and HWIC-4A/S Serial Cabling These cables are for use with the Cisco 4-Port Serial High-Speed WAN Interface Card (HWIC-4T) with four high-speed serial ports, and the 4-Port Asynchronous/Synchronous High-Speed WAN Interface Card (HWIC-4A/S) with four low-speed synchronous/asynchronous ports. Each card supports up to 4 serial cables. HWIC-8A/S Serial Cabling The Cisco 8-Port Asynchronous/Synchronous HWIC-8A/S uses a dual port configuration. Each cable is configured as a VHDIC 68 Pin to 4x DB25 RS-232 cable. The HWIC-8A/S will accept 2 cables for a toal of 8 ports. Custom Length Serial Cabling Custom Cable offers all our Cisco EQ cabling products not only in the same standard lengths available offthe-shelf, but we can also manufacture these cables in custom lengths to suit your installation requirements. Please contact your sales representitive or call Custom Cable for availability and pricing. HWIC-8A, HWIC-16A, SM-32A Serial Cabling customcable.com The Cisco 8-Port Asynchronous HWIC and 16-Port Asynchronous HWIC use one (HWIC-8A) or two (HWIC-16A) high-density 8-port connectors. The 8-port asynchronous cable provides the high-density connector on one end and eight RJ-45 plugs on the other. RJ-45- to DB-25 modular adapters are used to convert the RJ-45 to a DB-25 DTE or DB-25 DCE connection. Patch Panel Solutions Custom Cable’s HWIC Cable and Patching Solutions offer flexible and economical connectivity options when connecting Cisco’s HWIC asynchronous modules to network elements. HWIC High Density Patch Panel (HDPP) HWIC-8A, HWIC-16A, SM-32A Compatible Available in both 16 and 32 port RJ-45 versions, as well as a 16 Port DB25 version, the HDPP series of patch panels allow you to run a single cable (one cable for each 8 ports) to the back of the panel and access the ports from the front. Mounted in a compact 1 RU enclosure, the HDPP can provide up to 2 times the port density of typical cable to pass-thru patch panel solutions. Standard 16 Port RJ-45 Pass-Thru Patch Panel HWIC-8A, HWIC-16A, SM-32A Compatible Typical low-density solution that is compatible for installations that already have an investment in the CAB-HD8-ASYNC style Octal cabling. The 16 Port RJ-45 Pass Thru Patch Panel provides 16 PassThru RJ-45 adapters on a 19” wide 1 RU patch panel. Legacy Solutions, HDPP Kits, Custom Solutions and Adapter Cables Custom Cable also manufactures many cables for Cisco legacy systems like our part number A7309 which will adapt the older NM-16A and NM-32A interface cards to the HDPP High Density Panel series. We also offer a new line of adapter cables that convert from the older CAB-232MT cables with LFH ports to the new 26 Pin Smart Serial cables found on the HWIC-4T and 4A/S Interface cards allowing you to interface your existing cable plant with the newer technology products. And we offer a complete line of pre-configured HDPP kits, bundling the cables, patch panels and wire management products into one easy to order kit of parts. HWIC_090412_A Do you have a unique requirement with your HWIC Installation?.....Custom Cable has solutions.