Singapore Aerospace
Supplier Guide
All rights reserved. No part of this publication
should be reproduced, stored in a retrieval
system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying
or otherwise, without prior permission of the
copyright holders.
CONTENTS
5
FOREWORD
6
MESSAGES
7
OVERVIEW OF SINGAPORE’S
AEROSPACE INDUSTRY
8
SUPPLIER CAPABILITY MATRIX
12
PRECISION MACHINING & FORMING
66
AVIONICS & EMS
74
SECONDARY PROCESSES
FOREWORD
SPRING Singapore
The Asia-Pacific Aerospace industry has
been growing significantly with the region
benefiting from an increase in global
outsourcing activities. This presents good
growth opportunities for local enterprises,
especially the small and medium
enterprises (SMEs), providing supporting
services to the aerospace industry.
Singapore, showcasing a comprehensive
range of products and services being offered
here. They also display the high levels of
competency, quality control systems, quick
response and excellent after-sales services
provided by the Singapore enterprises.
By highlighting our local enterprises in the
aerospace industry, I am confident that
industry players worldwide will be able
to identify complementary strengths and
build strategic alliances. We look forward
to support the Aerospace industry to soar
towards greater heights.
To ensure that we stay ahead of the
competitive market, our SMEs should invest
in building up core business capabilities for
sustainability and expansion. SPRING had
been working closely with key partners
from the public and private sectors to
upgrade the capabilities of SMEs in
the aerospace supporting industries.
Through these efforts, our local SMEs
can develop capabilities in engineering
and manufacturing services, create new
and innovative products and processes,
establish better market outreach, as well
as form strategic groupings to offer a more
complete value-chain of services.
The Singapore Aerospace Supplier Guide
will support in facilitating more collaborations
between foreign companies and local
enterprises. The companies featured in
this guide are good representations of
the Aerospace manufacturing sector in
Png Cheong Boon
Chief Executive
SPRING Singapore
5
MESSAGE
Economic Development Board
Singapore is today a recognised air hub and
base for leading aerospace companies. We
have enjoyed strong growth over the past
two decades, achieving an output of S$7.1
billion in 2008.
A key development priority is the
strengthening of the local supplier base.
Many suppliers in Singapore are familiar
with the exacting precision and regular cost
reductions demanded by the electronics
industry. They have intentions to expand
into high entry barrier industries such as
aerospace, medical devices and oilfield
equipment. EDB’s Supplier Development
Initiative can help them fulfill these
intentions and is aimed at developing
suppliers and linking them in partnership
with Original Equipment Manufacturers.
The Singapore Economic Development
Board, together with our industry and
government partners, will continue to
grow Singapore’s aerospace industry.
We will identify new growth opportunities
and enhance capabilities, especially in
manpower, technology and infrastructure.
We aim to make Singapore an even more
attractive global location for aerospace
businesses.
Mr. Sia Kheng Yok
Director
Transport Engineering
6
OVERVIEW OF SINGAPORE’S
AEROSPACE INDUSTRY
The Aerospace industry is an important
contributor to the Singapore economy. Since
1990, the industry has grown at a compounded
annual growth rate of 12%. In 2008, the industry
achieved a record output of more than S$7
billion and employed about 19,000 people.
training as well as aviation services. Companies
setting up in SAP will benefit from the worldclass infrastructure as well as synergies arising
from cluster integration. The SAP has received
strong interest and support from companies
such as Eurocopter, Jet Aviation, ST Aerospace
and Rolls-Royce, which will be setting up
facilities there.
Singapore is today a global leader in Aerospace
Maintenance Repair and Overhaul (MRO),
accounting for a quarter of the Asia Pacific
market share. More than 100 international
companies carry out a comprehensive range of
MRO activities in Singapore, including airframe
maintenance, engine overhaul, component
repair, structural and avionics systems repair, as
well as aircraft modification and conversion. This
comprehensive “nose-to-tail” suite of capabilities
has established Singapore as a preferred onestop solution provider for MRO needs.
Development work at SAP has progressed
unabated over the past year. The runway
at the Seletar Airport is being extended to
accommodate larger aircraft. JTC is also
launching a Business Aviation Complex and
a General Aviation Centre to provide hangar
space, office space as well as warehousing
facilities for tenants.
Developing Aerospace-related Manpower
A key enabler of Singapore’s aerospace industry
is its high quality workforce equipped with strong
engineering and technical skills. The number of
aerospace professionals graduating each year
from Singapore’s universities, polytechnics and
technical institutes has more than tripled, and
is expected to reach more than 1,000 this year.
In addition, Singapore also launched a S$76
million initiative in 2007 to train more specialists
in precision engineering, the foundation of
manufacturing.
There is also a sophisticated base of aerospace
manufacturing activities in Singapore. Many of
these involve complex precision machining of
engine and aircraft parts. Our strong engineering
capabilities and reputation for quality, reliability
as well as timely delivery have anchored worldclass companies such as Hamilton Sundstrand
and Rolls-Royce here. Rolls-Royce’s Trent
engine assembly and test plant will be the first in
Asia to assemble engines for large commercial
aircraft, and deploy advanced techniques in
a “Facility of the Future”. This facility will be
supported by a production facility for Wide Chord
Fan Blades utilising some of the company’s
most sophisticated technologies.
Conclusion
The aviation sector in Asia is poised to grow,
presenting new business opportunities to
aerospace companies. Singapore will continue
to strengthen its aerospace capabilities, develop
its infrastructure, and build up its talent pool.
This will enable Singapore to be the essential
hub and ideal home for aerospace operations
in the region.
The Seletar Aerospace Park
The Seletar Aerospace Park (SAP) is 300 hectare
site developed with a secondary airport at its
heart. The SAP will host a cluster of aerospace
activities comprising MRO, manufacturing,
7
Supplier Capability Matrix
2 Advanced Tech Automation Pte Ltd
3 Chinyee Engineering & Machinery Pte Ltd
4 Disk Precision Group Of Companies
5 Equiptest Technologies Pte Ltd
6 Fong’s Engineering Pte Ltd
7 Grip Precision Engineering Pte Ltd
8 Index Precision Industries Pte Ltd
9 JCS Group
10 JEP Precision Engineering Pte Ltd
11 MMI Holdings Ltd
12 Onn Wah Precision Engineering Pte Ltd
13 PLC Industries Pte Ltd
14 Precision Products Singapore Pte Ltd
15 Rayco Technologies Pte Ltd
16 Raycom Aerospace Pte Ltd
17 Rei Promax Technologies Pte Ltd
18 Singapore Aerospace Manufacturing Pte Ltd
19 Singapore Precision Engineering Quality
Services (SPEQS) Manufacturing Pte Ltd
20 Singapore Technologies Kinetics
(Kinetics Integrated Engineering)
21 Super Union Precision Engineering Pte Ltd
22 Swift Precision Engineering Pte Ltd
23 Taimaru Engineering Pte Ltd
24 UMS Group
25 VDL Enabling Technologies Group
(Singapore) Pte Ltd
26 Wah Son Engineering Pte Ltd
8
INTERIOR
ing
ish
Fu
rn
nt
me
uip
Eq
a re
rd w
Ha
St r
uc
t ur
es
en
ts
AIRFRAMES
on
mp
Co
ic s
ctr
E le
on
mp
Co
1 A & One Precision Engineering Pte Ltd
on
en
nt
Pla
er
Po
w
Precision Machining & Forming
AVIONICS
ts
AERO-ENGINES
INTERIOR
ing
Fu
rn
ish
nt
me
uip
Eq
a re
Ha
rd w
es
St r
Co
uc
t ur
on
en
ts
ctr
E le
Co
AIRFRAMES
mp
ic s
on
mp
on
en
nt
Pla
er
Po
w
Avionics & EMS
AVIONICS
ts
AERO-ENGINES
27 Electronic Synergies (S) Ptd Ltd
28 Jabil Circuit (Singapore) Pte Ltd
29 Sanmina-SCI Systems Singapore Pte Ltd
31 Applied Total Control Treatment Pte Ltd
(ATC)
32 Cast Laboratories Pte Ltd
33 CEL Coatings Industries Pte Ltd
34 Frontken (Singapore) Pte Ltd
35 GT Industrial Pte Ltd
36 Hitech Heat Treatment Services Pte Ltd
37 Singapore Epson Industrial Pte Ltd
9
INTERIOR
ing
ish
Fu
rn
nt
me
uip
Eq
a re
rd w
Ha
St r
uc
t ur
es
en
ts
AIRFRAMES
on
mp
Co
ic s
ctr
E le
on
mp
Co
30 ACP Metal Finishing Pte Ltd
on
en
nt
Pla
er
Po
w
Secondary Processes
AVIONICS
ts
AERO-ENGINES
PRECISION
MACHINING &
FORMING
11
Precision Machining & Forming
Avionics & EMS
Secondary Processes
A & One Precision Engineering Pte Ltd
A & One Precision was founded in 1992
and incorporated as a private company
in 1994. Driven by a commitment to
quality and total customer satisfaction,
A & One has established itself as the
premier service provider in the precision
machinery industry, with unique characters
and unmatched strength. Its customers
range from data storage, semiconductor,
equipment
manufacturing,
medical
technology, aerospace, oil and gas and
telecommunication industries.
effort of its hardworking and dedicated
staff are just some of a few. The company
believes that human resources are
its greatest assets.
With its team of
experienced and talented staff, A & One is
committed to helping customers enhance
their competitive advantage through
cutting-edge technologies, and meeting
all their exacting standards for quality and
reliability — while at the same time achieving
cost effectiveness to achieve the best value
for its products.
Over the years, the company has created
a broad-based presence in the industry
and continues to invest heavily in state-ofthe-art precision machinery such as multiaxis machining centres and ultra-precision
measuring centres.
Today, the company is one of the leading
precision engineering service providers in
the region delivering a complete suite of
services. Besides fabrication of precision
processed components and sheet metal
works, A & One is capable of providing
customers with prototyping, assembly,
integration, testing, and the commissioning
of full turnkey projects, as well as the
manufacturing of customised equipment.
There are numerous factors that make A
& One the success that it is. Experience,
technical knowledge, and the collective
12
Key capabilities:
- Precision machining of components, sheet metal work
and assembly of turnkey projects
Major equipment list:
- Multi-pallet flexible machining system
- Multi-axis cnc turn mill centre
- 5-Face cnc vertical machining centre
- Multi-axis cnc horizontal machining centre
- Multi-axis cnc vertical machining centre
- Multi-axis cnc lathe
- High precision cnc grinding machine
- Laser cut machine
- Punch and form machine
- Precision press brake
- Cnc coordinate measuring machine
- Abrasive flow machine
Certifications
ISO 9001:2000
AS 9100:2004
Preferred
Supplier Award
by Teradyne
Outstanding
Supplier Award
by Asyst Inc
Overseas presence:
Factories in:
- Kuala Lumpur, Malaysia
- Wuxi, China
- Bintan, Indonesia
Outstanding
Supplier Award
by Xyratex
Contact information:
A & One Precision Engineering Pte Ltd
30 Loyang Way
#03-08 Loyang Industrial Estate
Singapore 508769
Tel: +65 6543 1181
Fax: +65 6542 1211
Email:sales@a-oneprecision.com
www.a-oneprecision.com
13
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Advance Tech Automation Pte Ltd
Established in 2001, Advance Tech
Automation boasts distinctive capabilities
in the manufacturing of precision machining
modules and the design, assembly and
integration of equipment and automated
assembly lines. With its wealth of experience,
Advance Tech provides optimal precision
engineering solutions with excellent after
sales support in the region. The company
has manufacturing facilities in Singapore
and China, and representations in Southeast
Asia and the Middle East. Its engineering
solutions and production capabilities are
highly sought after by some of Singapore’s
biggest players in the semiconductor, IT and
hard-disk drive industries.
14
Key capabilities:
- Machining of components and parts
- Design-and-build automated machines, equipment, jigs
and fixtures
Major equipment list:
- 3-, 4- and 5-axis machines
- CMM, profile projector and smart scope
Certifications
ISO 9001:2000
AS 9100
Overseas presence:
- China
Contact information:
Advance Tech Automation Pte Ltd
2 Woodlands Sector 1
#03-05 Woodlands Spectrum 1
Singapore 738068
Tel: +65 6457 3933
Fax: +65 6457 1101
Email: kenneth@avt-automation.com
www.avt-automation.com
15
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Chinyee Engineering & Machinery Pte Ltd
provides prototyping and design capabilities
to customers to support new product
development.
Chinyee Engineering and Machinery is a
leading manufacturer of precision parts and
assemblies to the aerospace, oil and gas
and semiconductor industries. It fabricates
machines as well as finishes and integrates
tight tolerance specialty alloy components
and metal products.
Through its strategic alliances, the company
provides complete turnkey solutions
involving parts which require coatings,
welding, heat treatments, precision cleaning
and the like. These value-added services
have strengthened Chinyee’s position as
a preferred supplier by improving overall
production efficiency and value.
The company has vast machining capabilities
that range from small milling machines to
large, sophisticated 5-axis milling centres.
It also boasts a wide range of horizontal
and vertical lathes. Additionally, Chinyee
16
Certifications
Key capabilities:
- Precision machining of complex components of different
materials such as inconel, titanium, steel, etc.
- Coatings, thermal spray and welding through its associated company
Major equipment list:
- 3- to 5-axis milling machines up to 4m x 2m in work size
- Horizontal lathes
- Vertical lathes up to 2m in work diameter
Contact information:
Chinyee Engineering & Machinery Pte Ltd
107 Gul Circle
Singapore 629593
Tel: +65 6543 1008
Fax: +65 6546 1008
Email: info@chinyee.com
Website: www.chinyee.com
17
ISO 9001
AS 9100
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Disk Precision Group Of Companies
leading players in the hard disk drive, oil and
gas, automotive, aerospace and consumer
electronics markets.
Disk Precision Group is a leading
precision engineering house in Asia with
headquarters in Singapore. Founded in
1986, it has grown from a small machining
shop in Singapore to a regional company
with production facilities in Singapore,
Malaysia and Thailand. This dynamic growth
can be attributed to its aggressive pursuit of
technological advancement and production
capacity investments.
The company has put in place a strategy of
vertical integration. It operates its own fully
equipped tool room with design capabilities
for its stamping division. It also operates
its own automated surface treatment
and plating lines to serve customers who
need products finished to high levels of
cleanliness standards.
The company operates more than 300 CNC
machine tools capable of both high-volume
and job-shop production of industrial
mechanical components. Driven by TQM
and 6-Sigma methodology, its state-ofthe-art metrology set-ups and on-line SPC
controls ensure its products are made to the
finest and most consistent quality.
To offer added value to its services, Disk
Precision provides integrated turnkey
manufacturing services which include
electromechanical
and
mechanical
assemblies and sub-assemblies. It offers
“one-stop” contract manufacturing solutions
to OEMs and ODMs in the medical, oil and
gas and automotive industries.
Today, Disk Precision is a leading approved
supplier of mechanical components to
18
Key capabilities:
- CNC technology
- Metrology solutions
- Surface treatment solutions
- Cleanliness control laboratory
Certifications
ISO 9001
AS 14001
Major equipment list:
- CNC turning centre
- CNC turn-mill centre
- CNC drill and tap centre
- CNC autolathe machine
- CNC multi-axis machining centre
- Center-less grinding machine
- Cylindrical grinding machine
- Double side grinding machine
- Lapping machine
- Surface grinding machine
- Stamping press
- Horizontal broaching machine
- Thread-rolling machine
- Knurling machine
- Barrel tumbling machine
- Flatness optical scanner
- Smart-scope
- CMM
- Roundness tester
- Surface roughness tester
ISO/TS 16949
OHSAS 18001
Overseas presence:
- Malaysia
- Thailand
Contact information:
Disk Precision Group
13, Woodlands Terrace
Singapore 738438
Tel: +65 6753 8168
Fax: +65 6753 3625
Email: vincentleo@diskprecision.com
www.diskprecision.com
19
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Equiptest Technologies Pte Ltd
development. From conceptual design,
product research and engineering, to final
release and high volume manufacturing, the
team consistently delivers exacting results
to its customers’ specifications.
Equiptest Technologies Pte Ltd (EQT) is
a highly integrated solution provider of
precision machines components and
assemblies. The company serves diverse
market sectors such as the semiconductor,
medical, disk drive and electronic industries
across Southeast Asia, China and the United
States.
Through its network of sales agents and
distributors, EQT boasts globalised initiatives
and a growth strategy that constantly
projects engineering solutions required at
least two to three years ahead. These needs
are matched by its technological roadmap
to ensure that the company is always ready
to provide innovative solutions ahead of its
competitors.
EQT specialises in customised engineering
solutions in mechanical engineering of
new products, precision mechanisms
and automated process machinery. Its
product development and application
team has extensive expertise in product
20
Key capabilities:
- Design and engineering
- Test contactor alignment analysis
- Probe pin electrical performance and lifespan analysis
- Test contactor structural FEA
- Thermal analysis
Certifications
ISO 9001
Major equipment list:
- CNC vertical machines (3-axis)
- CNC drilling machines (3-axis)
- CNC turning machines
- Non-contact QA equipment (Vision)
Overseas presence:
- Sales offices in Asia and sales representatives in Europe
and the United States
Contact information:
Equiptest Technologies Pte Ltd
No 1 Ubi View Focus One
#01-08
Singapore 408555
Tel: +65 6578 9900
Fax: +65 6578 9911
Email: eqt@equiptest.com.sg / jasonong@equiptest.com.sg
www.equiptest.com.sg
21
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Fong’s Engineering & Manufacturing Pte Ltd
opto-mechanical components, modules
or systems for the bio-medical, defence,
electronics, optics, communication, and oil
and gas industries.
With a 2,141 sq m (23, 045 sq ft) production
area in Singapore and a 2,400 sq m
(25,800 sq ft) production area in Nantong,
China, Fong’s Engineering and Manufacturing
is well-equipped to offer state-of-the-art
manufacturing technologies to its global
customers.
Fong’s Engineering regularly improves and
updates its products and processes. The
company believes that productivity and
achievement of strategic goals are a matter
of people. People are its key resource and
with good management, the organisation
and its staff consistently deliver on their
objectives and strategies.
With over 70 CNC high-tech precision
machines and a new 930 sq m (10,000
sq ft) assembly business unit, Fong’s
270 dedicated and skilled employees
manufacture and assemble high-end
mechanical,
electro-mechanical
and
22
Key capabilities:
- Precision machining, assembly and testing services
- Precision machining of components (build-to-print or customised)
- Electro-mechanical and opto-mechanical design, assemblies and testing
- Box build for medical instruments and communication system equipment
- Optical design
- Mechanical design
- Full turnkey products
Certifications
ISO9001: 2000
ISO13485: 2003
ISO14000: 2004
Major equipment list:
- 3- and 4-axis CNC machining centre (Mazak, Makino, Hurco) - 5-axis CNC machining centre (Decker Maho, Hurco) - CNC lathe c/w sub-spindle and 5-axis milling (Mori Seiki) - CNC lathe c/w 4-axis milling (Mazak)
- Integrex 100 III series (Mazak)
- Super quick turn 100 MSY (Mazak)
- Quick turn nexus 150 (Mazak)
- CNC turning centre GLS 200, GS460 (Goodway)
- CNC lathe (Dainichi/ Tonaldo)
- Internal grinding machine G27-55NC (SEIKI)
- Auto thread submer type wire cut machine, AU-500iA (Accutex) - Horning (Delapena)
- Lapping (Kemet)
- Universal cylindrical grinding machines (SEIKI)
Overseas presence:
- Nantong, China
Contact information:
Fong’s Engineering & Manufacturing Pte Ltd
79 Loyang Way
Singapore 508766
Tel: +65 6785 6465
Fax: +65 6785 1001
Email: jeremy@fongspl.com.sg
www.fongspl.com.sg
23
FDA-certified
as contract
manufacturer for
medical devices
since 2008
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Grip Precision Engineering Pte Ltd
Established in 1992, Grip Precision
Engineering has grown from a partnership
company to a wholly owned private limited
company that provides precision machining
and fabrication of jig and fixtures and gauge
fabrication for aircraft OEM and MRO
customers. The company also services
some of the biggest names in the oil and
gas industry.
A leader in mechanical engineering
solutions, Grip Precision Engineering
prides itself on its talented and dedicated
staff, all of whom work closely together
and in partnership with their customers
to manufacture and provide products and
services with quality and speed.
24
Belle Hernan
ndez
Key capabilities:
- Gauge fabrication
- Tooling fabrication
- Oil and gas components machining
- Aerospace components machining
- Aero composite material fabrication
Certifications
ISO 9001
AS 9100
Major equipment list:
- CNC milling M/C W/4 axis x 2 units
- CNC milling (Mazak)
- CNC milling (Euma-Spinner)
- Jig grinder (Moore)
- CNC lathe (Takaisawa)
- CNC lathe (Mazak) x 5 units
- Surface grinding (Yamara)
- Surface grinding (Kent) x 3 units
- Cylindrical grinding (Evergreen) x 3 units
- Lathe machine (Takaisawa) x 4 units
- Milling machine (King Rich) x 5 units
- Vertical band saw machine x 2 units
- Horizontal band saw machine
- Composite fibre reinforced material high speed machining
Contact information:
Grip Precision Engineering Pte Ltd
5 Gul Street 2
Singapore 629290
Tel: +65 6776 3371
Fax: +65 6776 3142 Email: khoomw@gripprecision.com|
25
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Index Precision Industries Pte Ltd
Index Precision Industries was established
in 1993 as a specialist manufacturer for
precision components of semiconductor
equipment industries. In 2001, the company
penetrated the aerospace industry by
providing vane casting modification
services.
Key capabilities:
- Manufacturing of high precision carbide or hardened
steel tooling spare parts
- Manufacturing of die inserts, gauges, pins, semiconductor
equipment parts
- Manufacturing of precision parts for industrial equipment
- Fabrication, repair and modification of vane castings
for the aerospace industries
- Engineering services performed in unigraphics and
Master Cam
- Plating, painting and specialty coating
- Heat and surface treatment
- Laser cutting/welding/marking
- EDM
- Injection moulding
Over the years, it has built up its expertise
with a wide range of machines. This
has given the company the ability and
competitive edge to provide high quality
products and services with on-time delivery
to its customers. To complement the vast
and varied needs of its customers, Index
Precision has employed a skilful and
capable workforce.
Major equipment list:
- CNC machining centre - Precision grinding machine
- Jigs and fixtures
Contact information:
Index Precision Industries Pte Ltd
Block 3013 Bedok Industrial Park E
#02-2118
Singapore 489979
Tel: +65 6241 0257
Fax: +65 6241 7515 Email: neo@indexprecision.com.sg
www.indexprecision.com.sg
The company understands the importance
of getting jobs done on time and within
budget and has consistently maintained
its commitments in quality and reliability
ensuring that its customers are always
satisfied. To that end, Index Precision
has also established quality standards
by adopting the ISO 9001 and AS 9100
international quality standards.
Certifications
ISO 9001
AS9100
ISO/TS 16949
OHSAS 18001
26
27
Precision Machining & Forming
Avionics & EMS
Secondary Processes
JCS Group
By 2003, its clean room cleaning services
were set up as a standalone service provider.
From 2004, JCS further established itself
within the aerospace industry for the
manufacture of compressor vanes, sheet
metal components and devices for medical
application.
JCS was established in Singapore in 1990
to provide automation services for the
electronics industry. The company has since
diversified to serve a wide range of industries
including the hard disk drive, semiconductor,
automotive and aerospace industries. JCS
found its niche in the manufacture and
supply of precision cleaning machines and
services focused specifically towards the
hard disk drive industry. Its sales arm was
set up in 1999 to streamline its precision
machinery and sub-assembly services for
ultrasonic cleaning and filtration equipment.
Today, JCS has an extensive international
network with a sales and technical support
office in Thailand, manufacturing and sales
offices in China, sales network in Southeast
Asia and the United States.
28
Key capabilities:
- Cleaning equipment builder
- Clean room service provider
- Contract electro-mechanical equipment assembly provider
- Cleaning services (up to sub-micron level)
- Aircraft engine component manufacturing
Major equipment list:
- Equipment and presses for sheet metal fabrication
- CNC-machining
- Welding
- Laser cutting
- Clean room cleaning equipment
- Laboratory and inspection
Overseas presence:
- China
- Thailand
Contact information:
JCS Group
2 Woodlands Sector 1 #01-07
Woodlands Spectrum 1
Singapore 738068
Tel: +65 6269 3931
Fax: +65 6269 1691
Email: jason@jcsauto.com.sg
www.jcsgroup.com.sg
29
Certifications
ISO 9001
AS 9100
Precision Machining & Forming
Avionics & EMS
Secondary Processes
JEP Precision Engineering Pte Ltd
fixture design/fabrication to machining of
components.
Established in 1990, JEP Precision
Engineering offers high quality precisionmachined products for the aerospace, oil
and gas and machine tool industries. Over
the years, the business has grown from a
small workshop in Singapore to a successful
company with manufacturing facilities in
both Singapore and Thailand. In Singapore,
its production facilities cover a land area of
140,000 sq ft (13,000 sq m).
Its subsidiary, JEP Thailand Co. Ltd
specialises in the manufacturing of machine
tools and gear cases. It covers a production
area of 15,000 sq ft (1,394 sq m) and has 60
employees. JEP Thailand is well equipped
with a vast range of CNC machines, from
horizontal and vertical milling machines, to
lathe and grinding machines.
Today, JEP Precision Engineering is a
leading sub-contractor for the local
aerospace industry, with more than 70%
of its production in Singapore specialised
in machining aircraft engine components.
Another 25% of its production targets the
oil and gas industry. The company also
provides highly integrated services to its
customers, offering turnkey projects from
By constantly reassessing the needs of
the high-tech engineering industry, the
company progressively invests in state-ofthe-art precision machines from renowned
machine tool builders to ensure that all its
customers’ demands are met.
30
Key capabilities:
- CNC 5-axis milling, vertical and horizontal milling, vertical and
horizontal lathe, cylindrical and surface grinding
- Manufacture of small to large parts, small to mid-volume
batches, or simple to complex components
Major equipment list:
- Mill/Turn 5-axis multi-tasking machines
630mm – 800mm pallet size
- 5-axis vertical machining centres
500mm x 500mm table size
- 5-axis with vertical indexer horizontal machining centres 630mm pallet size
- 4-axis horizontal machining centres 400mm – 800mm pallet size
- 3- and 4-axis vertical machining centres
1200mm – 2350mm table length
- 2-axis vertical lathes
550mm – 1250mm table size
- Mill/Turn capability horizontal lathes
220mm – 660mm diameter workpiece
- Carl Zeiss/Mitutoyo/DEA coordinate measuring machines 1080mm – 1950mm table width
- Mitsubishi CNC OD grinders
200mm diameter x 300mm workpiece
- Hauser jig grinder – 600mm x 380mm table size
Overseas presence:
- Thailand
Contact information:
JEP Precision Engineering Pte Ltd
46 Changi South Street 1
Singapore 486761
Tel : +65 6545 4222
Fax : +65 6545 2823
Email: jeppre@singnet.com.sg
www.jepprecision.com.sg
31
Certifications
ISO 9002: 1994
ISO 9001: 2000
AS 9100: 2004
Precision Machining & Forming
Avionics & EMS
Secondary Processes
MMI Holdings Ltd
manufacturing
technologies
includes
mechanical engineering design, precision
casting, machining and metrology, precision
assembly and testing, materials and surface
treatment (plating/contamination/finishing)
and industrial automation.
MMI is a leading precision engineering
components company serving global
market leaders in technology-driven
industries. Since its founding in 1989, the
company has consistently won industry and
business accolades including Enterprise of
the Year 1999, Supplier of the Year awards
with various OEMs, and a listing in Forbes
Asia Best-Under-a-Billion.
The company’s unique strength lies in its
ability to provide customised strategic
manufacturing
solutions
for
electromechanical
parts,
assemblies
and
equipment. These address the diverse
manufacturing strategies of its customers’
electro-mechanical products in multiindustry
sectors.
MMI’s
partnership
philosophy
ensures
its
customers’
intellectual properties are protected through
effective internal IP Protection policy and
protocols, contributing to the company’s
excellent reputation.
MMI occupies a niche among major contract
manufacturers thanks to its ability to provide
manufacturing solutions of significant scope
and scale with its precision mechanical
engineering capabilities. The company’s
depth comes from its 20 years of experience
and continual development of process
technology with investment in people and
infrastructure to support the increasingly
sophisticated needs of its customers.
The breadth of its precision mechanical
32
Key capabilities:
- Complete state-of-art manufacturing operations for low-to-
medium volume mission-critical components requiring complex
precision machining and secondary processes on exotic
metals.
- Precision machining: Operates more than 1,000 CNC
machining equipment daily throughout its operations,
comprising single and multiple axis milling and turning process,
Ram/wire EDM process, surface and cylindrical grinding
process, and specialty processes such as honing and gun
drilling/deep hole boring.
- Surface finishing: Capabilities include electrolytic/electro-less
nickel, Teflon, gold plating, clear clad, and specialty high-
velocity oxygen fuel (HVOF) thermal spray. Its laboratory is
equipped to conduct XRF thickness, salt spray, and metal
composition tests.
- Access to upstream/downstream processes: Includes thermal
spray, heat treatment, carbide/ceramic coating, anodising,
plasma coating, welding and speciality NDT testing.
Major equipment list:
- CNC turn-mill
- CNC lathe
- Deep hole boring
- Honing
- OD grinding
- Gun drill
- Universal machining centre
- CNC EDM
- CNC ED wire-cut
- CNC horizontal milling
- CNC vertical milling
- HVOF coating
Inspection:
- CMM, OGP scope
- Fiber/mini borescope
- Rockwell hardness tester
- Surface roughness tester
Overseas presence:
- Factories in Johor Bahru, Malaysia and Thailand
- Multiple facilities in Jiangsu Province, China
- Manufacturing facility in Phoenix, Arizona, USA
Contact information:
MMI Holdings Ltd
29 Woodlands Industrial Park E1
#01-16, Lobby 3, Northtech Building
Singapore 757716
Tel: +65 6767 8276
Fax: +65 6762 7238
Email: sales@mmi.com.sg
www.mmi.com.sg
33
Certifications
ISO 9001
ISO 9002
AS 9100
API
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Onn Wah Precision Engineering Pte Ltd
30% of its activity. This swift diversification
stems from a combination of Onn Wah’s
operational strengths and Singapore’s
outstanding infrastructure.
Onn Wah is a “make-to-print” organisation
specialising in precision CNC-machining
of complex medium-size components in a
high-mix low-volume environment. Since
its inception in 1961, Onn Wah has been
servicing various sectors including the
semiconductor, oil and gas, biomedical and
optics industries.
Today, the company and its
boast a 300-strong workforce.
philosophy is based on
improvement
towards
manufacturing practices.
Having obtained AS9100 certification in
2007, the company has diversified into the
aerospace market, which today accounts for
34
subsidiaries
Its business
continuous
world-class
Key capabilities
- Precision CNC-machining and equipment assembly services­
- Specialty in high-mix, low- to mid-volume manufacturing
(typically about 20 to 200 pieces per batch)
- Project management from RFQs to FAs to production
- Vendor-managed inventory schemes
- International shipment procedures (UK, France, New Zealand, China, US)
Major equipment list:
- Top-end CNC machines, including 4- and 5-axis milling and
coordinates measuring machines, exclusively from Japan and
Germany
- Quick changeovers for high-mix low-volume production
- 5-axis simultaneous machining for curved and/or complex
parts
Overseas presence:
- 100% owned subsidiary in Suzhou, China
Contact information:
Onn Wah Precision Engineering Pte Ltd
11 Changi South Lane
Onn Wah Building
Singapore 486154
Tel: +65 6844 3868
Fax: +65 6844 3118
Email: sales@onnwah.com.sg
www.onnwah.com
35
Certifications
ISO 9001:2000
AS 9100
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Precision Products Singapore Pte Ltd
Precision Products Singapore (PPS) is a
wholly owned subsidiary of Singapore
Technologies Aerospace. It is a leading
player in the precision investment casting
industry in which it manufactures casting
and mould toolings for customers in the
aerospace, defence, commercial, and oil
and gas industries.
With a $15-million annual turnover, PPS is
the largest non-ferrous and ferrous foundry
in Singapore.
36
Capabilities:
- Aluminium castings – materials 356, A356, A357 and C355
- Steel castings – carbon and low alloy steel, Cr-Ni stainless
steel, precipitation hardening stainless steel, grey iron, Ni-resist
- Super alloy castings - nickel-based Inconel 713 LC and Inconel
718
- Inspection and test – FPI, radiographic inspection, tensile
testing, hardness test, chemical analysis
Major equipment list:
- Wax injection machines
- Slurry and sand coating system
- De-waxing boilerclave
- High frequency melting furnace
- Aluminium melting furnace c/w vacuum chamber
- Vacuum melting furnace
- Roll-over furnace
- Aluminium heat treatment furnace
- Aging furnace
- Blasting machine
- Pre-heat & firing gas furnace
Certifications
ISO 9001:2000
AS 9100:2001
NADCAP AS
7114, NDT
NADCAP AS
7102, Heat
Treating
Contact information:
Precision Products Singapore Pte Ltd
102 Gul Circle
Singapore 629588
Tel: +65 6861 3995
Fax: +65 6861 4298
Email: ckcher@stengg.com
37
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Rei Promax Technologies Pte Ltd
Promax was formed in 2000 to offer
cost-efficient solutions to machining
problems. Through teamwork, continuous
improvement and the development of
partnerships with customers, suppliers
and employees, Promax has helped
manufacturers improve productivity and
product quality.
Key capabilities:
- CAD/CAM design
- Rapid prototyping
- Precision machining
- Batch production
- Mass production
- Large form factor machining
- Graphite machining
- Design and fabrication
Major equipment list:
- CNC vertical machining x 9 units
- CNC horizontal machining
- CNC turning x 2 units
- Conventional milling machine x 4 units
- Conventional turning machine
- Surface grinding machine x 3 units
- Honing machine
- Lapping machine
- CNC coordinate measuring machine
- Roughness tester
- Profile projector
The company has attracted a highly skilled,
dedicated and motivated workforce whose
competence and commitment all count
towards its goals. The quality of its people
is the company’s strength — they all share
integrity, commitment and teamwork as
core values. The Promax team uses its cooperative and friendly business culture as
a platform to constantly improve its already
excellent quality and customer care.
Overseas presence:
- Suzhou, China
Contact information:
REI Promax Technologies Pte Ltd
Blk 11 Kallang Place # 02-08A/08B/09/10
Kallang Basin Industrial Estate
Singapore 339155
Tel: +65 6299 5758
Fax: +65 6299 3202
Email:wee@promax.sg
www.promax.sg
Promax’s stellar reputation has led to
continued growth into new and challenging
markets. It constantly invests in new plants
and machinery to enhance its exceptional
component
manufacturing
standards.
To achieve its leadership position, the
company fulfils the needs of its customers
with its winning formula of design
improvements, manufacturing excellence,
skilled equipment integration and superior
service.
Certifications
ISO 9001
38
39
Precision Machining & Forming
Avionics & EMS
Secondary Processes
PLC Industries Pte Ltd
employees. This has helped the company to
grow and prosper over the years.
Established in 1995, PLC Industries has
built a reputation for excellent service and
consistently delivering quality products on
time and at competitive prices. It is often
the principal and preferred partner to its
clients. The company guarantees customer
satisfaction and will go to any length to
ensure customer expectations are not just
met but exceeded.
Its machine shop features the latest CAD
and CAM software, as well as the most
modern CNC 5-axis milling and turning
centres. Thanks to its manufacturing
expertise, PLC Industries deftly handles
any material, from standard aluminium to
exotic metal machining including inconel®,
monel, titanium, 17-4 ph and stainless steel,
to name a few.
PLC Industries continually strives to build
long-term partnerships with its customers,
suppliers and most importantly, its
40
Key capabilities:
- 5-micron cylindricity accuracy or better
- Surface finish in R.a 0.2 micron = 200nm
- Flatness in 1.27 micron
- Perpendicularity in less than 5 arc sec (0.00138 deg)
- Turnkey solutions
- Box-built
- Sub-assembly of optics
- Key manufacturing/process equipment
- CNC turn/5-axis mill/turn-mill Certifications
ISO 9001:2008
ISO 13485:2003
Major equipment list:
CNC Machining(Turning):
- Okuma LCS 15/ Okuma LB 15/ Okuma LB 9/ Okuma LB
200(Turn - Mill)/ Okuma LB 300C/ Okuma LB 270E/ Mori Seki/
LB 3000/ LB 2000(Turn - Mill)/ Weiler (Turn - Mill)/ Index GS42
(Turn – Mill)/ Index GS30 (Turn – Mill)
Precision Lathe:
- Colchester/ SD-25A
CNC Machining (Milling):
- Mori Seki (4 Axis)/Takisawa (MAC V-40)/ Brother (TC – 217)/
Howa (2 tables)/ Sirius 550 (5 Axis)
Profile Projector:
- Mitutoyo (PM-3500)
CMM:
- Brown & Sharp
CMM (CNC)
- Wenzel
Pin Gauges:
- Vermont Gauge
Slip Gauges:
- Mitutoyo
Trimos:
- Tesa/Micro-Hite
Contact information:
PLC Industries Pte Ltd
Blk 28B Penjuru Close
#01-01
Singapore 609130
Tel: +65 6265 2908
Fax: +65 6265 5036
Email:marc@plc.com.sg
www.plc.com.sg
41
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Rayco Technologies Pte Ltd
Rayco supports its customers in product
and tooling design, developing unique
elastomeric formulation and fabrication
of moulds. It is capable of over-moulding
elastomers with various materials such as
metal, plastics, film and fabric. They also
support PTFE coating and provide ultraclean parts in a Class 100 cleanroom
environment.
Rayco Technologies is a Singaporean
company founded in 1954 to provide
customised precision elastomer solutions
for the automotive and aerospace, data and
mobile storage, and medical and electronics
industries. The company conducts research
and development as well as designs
and manufactures precision elastomer
components at our internationally certified
manufacturing facilities in Singapore and
China.
42
Key capabilities:
- One-stop customised precision elastomeric component solution
provider from design to delivery: in-house material formulation, tool
design and cutting, moulding, clean room operations and lab tests
- Specialised in miniature, complex and over-moulding of elastomeric
materials with metal, plastic and fabric for specific engineering
needs
- Serving global customers in aerospace, automotive, data/mobile
storage, life sciences and electronics industries
Major equipment list:
Tool Room:
- CNC EDM (Germany/Japan)
- Machine centre (Germany/Japan)
- Milling machine
- CNC turning auto lathe
Certifications
ISO 9001
ISO/IEC 17025
TS 16949
ISO 14001
Production:
- Compounding – Auto batching system
- 2/4 roll mill
- lab mill
- Preparation – Precision preformer with strainer
- Moulding – Auto PLC vulcanising presses
- Rubber/TPE/TPR/LSR injection machine
- DIPG
- Secondary – Vacuum oven
- Process pen recorder controlled air ventilation oven
- Cryogenic deflashing machine with PLC SPC
- Trim press
- Mould cleaning machine
- Polishing machine
- PTFE coating
Accredited test services:
- Ion chromatography (IC)
- Fourier transform infrared spectrophotometer (FTIR)
- Gas chromatography – mass spectrometry (GCMS)
- Thermogravimetry analysis (TGA)
- DIN microhardness testing
Contact information:
Rayco Technologies
1020 Tai Seng Avenue
#07-3506 Tai Seng Industrial Estate
Singapore 534416
Tel: +65 6280 0366
Fax: +65 6284 1468
Email: susan.ng@parker.com
www.raycotechnologies.com
www.parker.com
43
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Raycom Aerospace Pte Ltd
experience have inspired confidence in
Raycom throughout the aerospace and
oil and gas industries. With its mission to
build strong, mutually beneficial and lasting
relationship with its customers, Raycom
never compromises on quality standards
and guarantees reliability in its products and
services.
Raycom Aerospace Pte Ltd was founded
in 2003 to manufacture precision
components for the aerospace industry.
Its strict adherence to the highest industry
standards has resulted in the prestigious ISO
9001:2000/AS9100 certification. Raycom
is also NADCAP-certified in vacuum heat
treatment and FPI special processes and
boasts an in-house calibration laboratory for
gauges.
In 2006, Raycom began production of gas lift
valves, dummy valves, orifice valves, latches
and other critical metal components for the
oil and gas extraction industry. The technical
skills behind all of these applications have
built Raycom into a market leader.
Highly skilled personnel with numerous
years of international and regional
44
Key capabilities:
- Vacuum brazing and heat treatment
- CNC milling and turning
- Electrical discharge machining (EDM)
- TIG welding
- Unigraphics CAD/CAM
- Fluorescent penetrant inspection
- Induction welding
- Calibration laboratory
- CMM
- APU components – inserts, liners, etc
- Value-add assembly including testing
- Precision engineered parts
Certifications
ISO 9001:2000
AS9100 Rev B
NADCAP
(non-destructive
testing)
Major equipment list:
- Integrex Mark III ST
- Mazak CNC QTN 150 lathe
- Okuma LR15 & LU15
- Hardinge Quest 6/42
- Mazak vertical centre
- NEXUS 410A 410B
- Mori Seiki SL 25B
- Okuma LB-25II turning centre
- Hass Super mini mill
- CNC 9-axis turn mill & 3D-cutting
- CNC 4-axis vertical milling machine
- CNC super mini vertical mill
- CNC-lathe
- EDM
- Vacuum furnace
- FPI
- CMM
- In-house calibration lab
NADCAP
(heat treating)
API Q1
API 11V1
Overseas presence:
- Dubai, UAE
- Abu Dhabi, UAE
- Oman, UAE
Contact information:
Raycom Aerospace
47 Changi North Crescent
Changi North Industrial Estate
Singapore 499623
Tel: +65 6542 1555 Fax: +65 6542 0555
Email:stephen.kim@raycomaerospace.com
www.raycomaerospace.com
45
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Singapore Aerospace Manufacturing Pte Ltd
Singapore Aerospace Manufacturing (SAM)
is a subsidiary of Accuron Technologies
and headquartered in Singapore. With
1,200 employees across Asia and Europe
servicing the aerospace and industrial
equipment industries, SAM is equipped with
cutting edge manufacturing capabilities to
service leading global companies in these
respective industries. The company provides
quality aerostructural parts and assemblies
for global players, focusing primarily on
actuators, engine mounts, airfoils, engine
cases and landing gears.
46
Key capabilities:
- Special processes: TIG, MIG, robotic welding, plasma welding,
brazing, sulfuric anodising, shot peening, glass bead peening,
heat treatment, chemical cleaning (UHV), blue-etch
- Non-destructive testing: FPI, MPI, ultrasonics, x-ray
- Powder coating and wet painting
- Sheet metal, frame and structural fabrication
- Factory automation and material handling solutions provider
- Equipment contract manufacturing and system integration in
class 10k environment
Major equipment list:
- 5-axis and 4-axis CNC milling up to 3.4 m
- 5-face CNC milling up to 2.5 m x 5m x 1.6 m
- Turning up to 2.5 m diameter
- Laser cut, turret punching, and press brake up to 125 tons
Overseas presence:
- Singapore
- Germany
- Malaysia
- China
- Thailand
Contact information:
Singapore Aerospace Manufacturing Pte Ltd
51 Corporation Road
Singapore 649806
Tel: +65 6668 8787
Fax: +65 6262 2230
Email: limpeter@sam.sg
www.sam.sg
47
Certifications
ISO 9001:2000
AS 9100
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Singapore Technologies Kinetics
(Kinetics Integrated Engineering)
Key capabilities:
- Welding: GMAW, GTAW and SMAW
- Heat treatment: annealing, normalising, stress relief,
hardening, gas nitriding, carbonitriding, solution
treatment, sub-zero treatment
- Chemical finishing: Chemical analyses and testing, zinc and
manganese phosphating, hard chroming, black oxidising,
selectron plating
- Surface treatment/plating: blasting, painting and coating
- Precision machining: horizontal machining and boring,
turn-mill, deep-hole boring, deep-hole milling
- Fabrication: water jet and CO2 laser plate cutting
Singapore Technologies Kinetics (Kinetics
Integrated Engineering) is the land
systems and specialty vehicles arm of
Singapore Technologies Engineering Ltd
(ST Engineering). As one of Asia’s leading
defence and specialty vehicles company, ST
Kinetics has a strong portfolio of products and
services for the defence, homeland security
and commercial markets. Their capabilities
include the design and development,
systems integration, production, operations,
support and through life management of
a wide range of specialised land systems
equipment and specialty vehicles.
Major equipment list:
- Carburising furnace
- Vacuum furnace
- Pit furnace
- Nitriding pit furnace
- Carbottom furnace
- Aluminium and other supporting furnace
Contact information:
Singapore Technologies Kinetics
(Kinetics Integrated Engineering)
16 Tuas Avenue 7
Singapore 629071
Tel: +65 6470 8015
Fax: +65 6470 0622
Email: lohderrick@stengg.com
www.stengg.com
Kinetics Integrated Manufacturing (KIM) is
the platform and weapons manufacturing
hub of ST Kinetics. In recent years, Kinetics
Integrated Engineering (KIE) was formed
to tap on KIM’s comprehensive range
of manufacturing facilities to serve the
commercial market. Currently, KIE provides
customised solutions, products and
services in the area of rapid deployment,
specialty vehicles, contract manufacturing
and engineering design for the defence and
commercial markets
Certifications
ISO 9000
ISO 14000
ST Kinetics is made up of three business
groups, namely Land Systems & Solutions,
Specialty Vehicles & Services and Total
Support & Services groups.
AS 9104A
API certified
NADCAP
by mid-2010
48
49
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Singapore Precision Engineering Quality Services
(SPEQS) Manufacturing Pte Ltd
Enterprise
Resource
Planning
(ERP)
system with fully integrated Product
Lifecycle Management (PLM) features.
This helps to sustain its AS9100 quality
standard while managing its business
processes, product data and manufacturing
operations efficiently. The integrated
ERP/PLM
system
improves
product
traceability to provide timely and accurate
information.
Incorporated in 1990, SPEQS serves
the needs of the healthcare, security,
aviation, telecommunications, electronics,
electro-mechanical and oil and gas
industries with quality precision machining.
Its range of CNC machines is capable
of performing multi-axis machining for
complicated parts to the tolerance required
of each customer’s specifications.
The company is further supported
by its excellent network of heat treatment,
chemical/surface finishing and other service
providers, all of whom allow SPEQS to be a
trustworthy integrated one-stop solutions
provider.
Over the last few years, SPEQS has
upgraded its production capabilities from
primarily auto-lathe turning services to
large turn-mill and machining centres
(with stringent control standards) for the
aviation and oil and gas industries.
To enhance its competitive edge, the
company implemented a web-based
50
Key capabilities:
- Offers a wide range of services utilising high-end CNC
machines (auto lathe, turn/mill and machining centres) on
ferrous, non-ferrous and plastic materials, as well as assembly
works
- Provides engineering support services
- Performs customised product design, development,
prototyping and product testing
Major equipment list:
- CNC multi-axis auto-lathes
- CNC machining centres
- CNC lathes, CNC turn-mills
- CNC horizontal machining centres
- Electro chemical deburring machine
- Coordinate measuring machines
Contact information:
SPEQS Manufacturing Pte Ltd
10A Joo Koon Circle
Singapore 629115
Tel: +65 6861 6938/6861 1730
Fax: +65 6861 6989
Email: sales@speqs.com.sg
www.speqs.com.sg
51
Certifications
ISO 9001:2000
EN/JISQ/
AS 9100:2004
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Super Union Precision Engineering Pte Ltd
industries including oil and gas, aviation,
marine, medical and semiconductors, each
appropriately supported by its trained and
experienced workforce.
Established in 1991, Super Union Precision
Engineering is a leading precision machining
company with facilities in assembly and
engineering services. The company boasts
128 highly skilled employees and a wide
range of cutting-edge machinery. Product
conformity, reliability and well-documented
procedures are key aspects of the
company’s AS9100 accreditation and ISO
9001:2000 certification.
In meeting its customers’ expectations and
challenges, the company practices stringent
quality control while adopting the most costeffective operation processes. Additionally,
its lean hierarchy allows flexibility in its
operations and quick turnaround when
important decisions need to be made. With
its capabilities and well-established facilities,
the company serves an extensive range of
52
Key capabilities:
- Precision machining (all types of materials)
- Assembly
- Clean room assembly (Class 1,000)
- Engineering
Certifications
AS 9100 Rev. B
Major equipment list:
- CNC Mill: 23 CNC machines comprising of 3-, 4- and 5-axis
(work-piece size of up to 1,940mm x 1,200mm)
- CNC Turn: 2 vertical and 4 horizontal
(work-piece size of up to 900mm x 700mm)
- CNC Turn-Mill: 2 units of high performance machine
(work-piece size of up to 420mm in diameter and 1,260mm in
length)
- CNC Auto-Lathe: 3 heavy duty and high speed machine
(work-piece size of up to 20mm in diameter and 600mm in
length)
- EDM/Wirecut: 4 EDM and 5 wirecut for the fabrication of
hardened metal or carbide parts (accuracies of up to 2 µm)
- Grinding: 15 high precision grinding machines including 1 unit
of Wasino profile grinder for ultra high precision parts.
Overseas presence:
- Ayutthaya, Thailand
Contact information:
Super Union Precision Engineering Pte Ltd
10 Kaki Bukit Avenue 1, #02-02
Kaki Bukit Industrial Estate
Singapore 417942
Tel: +65 6841 3113
Fax: +65 6841 2118
Email: sales@superunion.com.sg
www.superunion.com.sg
53
ISO 9001: 2000
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Swift Precision Engineering Pte Ltd
two consecutive years, all of which are a
testament to Swift’s commitment to offering
quality and efficiency to its customers.
Swift Precision Engineering has come a long
way from its humble beginnings. From just
six employees in 1989, it has staff strength
of over 80 today. The company focuses on
the machining of precision components
and parts for the aerospace, oil and gas
and general manufacturing industries. It
also boasts design and build capabilities
for fixtures and gauges. Within its stable are
a cluster of sophisticated machines, such
as the Charmilles wirecut machine with
an accuracy of up to two microns and jig
grinding machines.
Despite its success, Swift constantly looks to
improve and upgrade its skills and services.
The company boasts both ISO 9001: 2008
and AS/EN/JISQ9100 certification and has
been named Best Tool Vendor by TOS for
54
Key capabilities:
- Precision metal machining
- Design and build of fixtures and gauges
- Tool and die parts making
- CNC milling and turning
- Jig and cylindrical grinding
- EDM, super drill and wire cut service
Certifications
ISO 9001: 2008
AS/EN/JISQ9100
Major equipment list:
- Mori Seki turning machine x 9 units
- Leadwell LTC-30 CNC turning machine x 1 unit
- Mori Seki NL-2500Y turn mill machine x 2 units
- Wei Hong BTA2000 CNC deep hole drilling machine x 1 unit
- You Ji TV-1200ATC CNC vertical turning lathe machine x 1 unit
- Makino twin pallet milling machine x 8 units
- Mori Seiki milling machine x 5 units
- Mori Seiki horizontal milling machine x 1 unit
- OKK graphite machine x 1 unit
- Fanuc Robodrill machine x 1 unit
- Conventional turning/milling machine x 10 units
- Rusia drilling machine x 1 unit
- Charmilles wire cut machine x 2 units
- Mitsui Seiki NC jig grinding machine x 2 units
- Tschudin Grenchen cylindrical grinding machine x 2 units
- Surface grinding machine x 7 units
- ARC EDM machine x 12 units
- Super drilling machine x 1 unit
Contact information:
Swift Precision Engineering Pte Ltd
51 Bukit Batok Crescent
#03-18, Unity Centre
Singapore 658077
Tel: +65 6316 2068
Fax: +65 6316 2078
Email: enquiry@swiftprecision.com.sg
www.swiftprecision.com.sg
Branch:
No. 1 Loyang Walk
Loyang Industrial Estate
Singapore 508784
55
Best Tool
Vendor Award
2007 by TOS
Best Tool
Vendor Award
2008 by TOS
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Taimaru Engineering Pte Ltd
modifications of a wide range of mechanical
components
At its 3,662 sq m (39,417 sq ft) fully
integrated plant in Singapore, Taimaru
houses over 45 units of specialised
machines. These include CNC milling, CNC
turning, 5-axis (turn/mill) machines and gun
drill machines. These machines support
precision machinery, general repair works
and the servicing of machinery parts. A
list of qualified vendors provides support
on secondary processes such as coating,
cladding and material treatments.
Established in 1975, the company is ISO
9001:2000-certified and boasts a staff
strength of 49, many of whom have worked
with the company for at least eight years.
Over the years, the company has identified
the constant need for adopting new skills
in order to rise to any challenge that the
industry might present. As such, much focus
is placed on the developing and upgrading
of its employees’ skills and knowledge,
on top of the constant improvement of its
machineries’ capabilities.
Taimaru has a dedicated team of engineers
and technicians, all of whom are impeccably
trained in the work of fabrication and
56
Key capabilities:
- Specialists in the fields of precision machinery, general repair works
and servicing of machinery parts
Major equipment list:
- Vertical 5-axis CNC turn/mill (Mazak Integrex E-1550V/10 2) x 1 unit
- 5-axis machine centre (DMU 200P TNC 430) x 1 unit
- CNC 5-axis deep hole drilling machine (IA3TLF) x 1 unit
- Gun drill machine (TL1001) x 1 unit
- CNC lathe (Power Master-N (3000U)) x 2 units
(QT30N) x 2 units (M5N) x 2 units
- Vertical machine centre (various models & sizes) x 4 units
- Manual lathe (various models & sizes) x 12 units
- Manual mill (various models & sizes) x 9 units
Certifications
ISO 9001: 2000
Singapore
SME 500
Company 2009
Major Measuring Equipment
Faro platinum arm:
- No. of axis : 6
- Reach
: 8 feet (max)
- Accuracy
: 0.025mm
Mic-Trac:
- Model
: MT3000
- Setting length: 36” max
- Accuracy
: 0.0003”
Contact Information:
Taimaru Engineering Pte Ltd
73 Joo Koon Circle
Singapore 629091
Tel: +65 6862 5800
Fax: +65 6862 5811
Email: mails@taimaru.com.sg
www.taimaru.com.sg
57
Precision Machining & Forming
Avionics & EMS
Secondary Processes
UMS Group
Key capabilities:
- Machining of high precision and complex large platform
components
- Processes wide range of material including inconel,
titanium, alu, steel
- Cleanrooms for system assembly, final integration,
and test
- Electro-mechanical and computerised final testing
- In-house special processes including anodising, nickel
plating, brazing, welding, chemical cleaning, plating,
e-beam welding, electro-polishing, etc.
Established in 2001, UMS Group’s core
business is in high precision machining of
large platform parts, special and chemical
processes and contract manufacturing/
system integrations and testing. The
company serves the OEMs of semiconductor
wafer fabrication equipment, oil exploration,
aerospace and solar sectors.
Major equipment list:
- 5-axis DMG horizontal machining centres –
L133.86 x W110.25 x H62.99 in
- 5-Axis Mazak V730 horizontal machining centres
- 5-Axis Mazak V630 horizontal machining centres
- 5-Axis Mazak Integrex e500 turn-mill machining centres
- 5-Axis Mazak Integrex e1060V8 horizontal machining
centres
- 5-Axis Mazak Integrex e1550V horizontal machining
centres
- OM Neo80 vertical turning lathes
- Makino Mag3.Ex
- CMM Mitutoyo – 2 m x 4 m
- Profile projectors
- Gauges
The Group is headquartered in Singapore
with an additional 480,000 sq ft (44,600 sq
m) facility in Penang, Malaysia. It also has an
office in Fremont, USA and a vast network
of global supply chains. Both its plants are
equipped with state-of-the-art facilities and
equipment, including cleanroom cleaning
lines and cleanroom assembly and test
operations.
Overseas presence:
- Penang, Malaysia
- Fremont, USA
Contact information:
UMS Group
23 Changi North Rise Crescent
Changi North Industrial Estate
Singapore 499616
Tel: +65 6543 2272
Fax: +65 6543 0623
Email: kl_goh@umsgroup.com.sg
www.umsgroup.com.sg
Certifications
ISO 9001:2000
AS 9100
ASQR-05
58
59
Precision Machining & Forming
Avionics & EMS
Secondary Processes
VDL Enabling Technologies Group (Singapore) Pte Ltd
Key capabilities:
- System integration and modules for OEMs
- Covers the value chain from (co-) engineering through parts
production to assembly and testing
- Examples of parts manufactured include engine casings,
wafer handling systems, process chambers, vacuum
chambers, etc
Part of the international VDL Group, VDL
Enabling Technologies is spread over 75
companies with 7,100 employees. Its plant
in Singapore operates in the business of
system integration of mechatronic (sub)
systems and modules for OEMs in the hightech capital equipment industry and in the
area of production mechanisation. As a
system supplier, VDL Enabling Technologies
covers the value chain from engineering and
co-engineering through to parts production,
assembly and testing.
Major equipment list:
- CNC Boring Equipment
- Co-ordinate Drilling Equipment
- Wire Cutting Equipment
- Surface Grinding Equipment
- Round Grinding Equipment
- CMM
- Machining centres and Large Milling Equipment
- Turning Equipment
- Spot Welding and Mirco Welding Equipment
The company is committed to supporting
its customers wherever their numerous
manufacturing facilities are sited.
Overseas presence:
- Netherlands/Europe
- China
Contact information:
VDL Enabling Technologies Group (Singapore) Pte Ltd
259 Jalan Ahmad Ibrahim
Singapore 629148
Tel: +65 6508 0352
Fax: +65 6265 7466
Email: bob.shaw@vdletg.com
www.vdlgroep.com
Certifications
ISO
ISO9001:
9001:2000
2000
DSQR
for
ISO 14001:
2004
GE Aviation
60
61
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Wah Son Engineering Pte Ltd
Wah Son is a leading specialist in aerospace
tooling and ground support equipment
(GSE) in Asia. The company supplies engine
tooling and GSE to major aerospace enginemakers around the world directly as a firsttier supplier.
Wah Son Engineering is a precision tooling
manufacturer focused on serving the
aerospace engine and airframe sectors.
The company’s core competency is built
around customised manufacturing of closetolerance, high-complexity, medium-tolarge precision tools, moulds, jigs, fixtures
and structural equipment for the aerospace
industry. It also provides precision machining
services to the defence, biomedical and
various precision engineering industrial
sectors.
Building on its extensive experience in
providing precision engineering support,
Wah Son has developed a wide-ranging set
of capabilities. The company offers a full
suite of engineering services from design,
manufacturing and assembly, to repair and
maintenance of equipment.
With a reputation for providing excellent
quality and outstanding customer service,
62
Key capabilities:
Manufacturing of full-range aerospace tooling including but not
limited to:
- Assembly and disassembly tooling for engine and modules
- Component repair tooling
- Engine transportation stand and GSE
- Engine test equipment
- Fabrication fixtures
- Inspection fixtures
- Lifting devices and equipment
- Line maintenance tooling
- Machining fixtures
- Passenger-to-freight conversion tooling
- Manufacture, repair, modification and enhancement of special
application equipment and tools
- Precision machining of medium-to-large, high complexity and
tolerance parts for the aerospace and various precision engineering
industrial sectors
Major equipment list:
- Toshiba CNC 5-face double-column machining centre (4,500mm by 2,900mm)
- Toshiba CNC horizontal machining centre (1,600mm by 1,000mm)
- Makino high-speed CNC horizontal machining centre (1,000mm by 1,000mm)
- Toshiba CNC vertical turn-mill centre (dia. 1,600mm by 1,550mm)
Overseas presence:
- At planning phase
Contact information:
Wah Son Engineering Pte Ltd
71 Loyang Way
Singapore 508761
Tel: +65 6542 1714
Fax: +65 6542 1715
heejoo@wahson.com.sg
www.wahson.com.sg
63
Certifications
ISO 9001: 2000
DSQR for
GE Aviation
Avionics & EMS
65
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Electronic Synergies (S) Pte Ltd
Established in 1994, Electronic Synergies
is now a leader in the supply of premium
quality and cost-effective wire harnessing,
cable assemblies, box-built and highmixed PCBA products. Its customer base
spans across Europe, the United States,
Japan, Australia, New Zealand and Asia.
As part of its continuous commitment
to its customers, the company invests in
people, facilities, equipment and systems.
In 2006, they invested about S$600,000
(US$430,000) in an Enterprise Resource
Planning (ERP) System, which improves the
efficiency in managing its resources to focus
on services, support and on-time deliveries.
It expanded its manufacturing facilities in
Johor, West Malaysia, which increased its
factory floor area by 33,000 sq ft (3,092 sq
m) and more than doubled its production
capacities. Logistic centres in the region are
currently in the works.
Key capabilities:
- Lead-free processing
- Vertical moulding
- Terminal crimping
- Wire stripping and twisting
- Automatic wire cutting, stripping and crimping
- Component pre-forming
- In-circuit testing of loaded boards
- Functional testing with customised and fabricated testers
- Automated optical inspection of screening placement defects
- Electrical parametric and functional testing
- Mechanical dimension checks and inspections
- Mechanical stress tests, bending tests
- Durability measurement of connector couplings and terminals
- High-speed CSP placement
- BGA placement and reworking
- Fine pitch component placement
- High accuracy and fine pitch paste printing
- Solder paste height measurement and solder temperature profiling
Overseas presence:
- Malaysia
- Hong Kong
- China
Contact information:
Electronic Synergies Pte Ltd
60 Kaki Bukit Place
#08-01 Eunos Techpark
Singapore 415979
Tel: +65 6742 1930
Fax: +65 6742 3835
Email: kh.koh@esynergies.com.sg
www.esynergies.com.sg/
Certifications
ISO 9001
ISO 14001
AS 9100
66
g
67
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Jabil Circuit (Singapore) Pte Ltd
Its assembly services are complemented by
front-end product development capabilities
including strong CAD layout and design
experience. Naturally, quality always
comes first — the company employs DFX
fundamentals as well as quality and datatracking methodologies.
Jabil Circuit is an electronics solutions
company that provides comprehensive
electronics design, production and product
management services to global electronics
and technology companies.
Jabil’s roots lie in the assembly and testing of
printed circuit boards. Today, it supports high
and low-mix PCB and backplane assembly
for volumes that range from a few units for
prototypes to hundreds of thousands in
volume production. Jabil Singapore is also
the only JDAS site in Asia specialising in
aerospace and defence products, complex
conformal coating, military-standard BGA
and wire harnesses.
Advanced technology development and a
global reach allow Jabil to be responsive
to its customers’ product design needs.
It effectively builds in solutions that lower
costs throughout the product’s life cycle. The
company’s design capabilities range from
subsystem and full turnkey product designs
to cost reductions for existing designs.
68
Key capabilities:
- Design assurance
- Electrical engineering
- Industrial design
- Mechanical engineering and design
- PCB design
- Software/firmware experience
- Tooling engineering
Major equipment list:
- DEK screen printer 265 Infinity
- Universal chip shooter Advantis AC-30L
- Universal odd component placer GSM 2
- Vitronic Soltec XPM2-1030 reflow oven
- Vitronic Soltec Delta Wave
- Paste height inspection machine, Vision Master AP212
- BGA rework station SRT-Summit 1100
- Fein focus FXS10-23 x-ray inspection machine
- Genrad ICT tester GR 2286
- Dataman programmer
Certifications
ISO 9001: 2000
ISO 14001: 2004
OHSAS
18001: 2008
AS 9100 Rev B
FAR 145
Contact information:
Jabil Circuit (Singapore) Pte Ltd
620 Lorong 1 Toa Payoh
Level 4
Singapore 319761
Tel: + 65 6882 4800
Fax: +65 6254 4348
Email: Waichong_sheetoh@jabil.com / Connie_tan@jabil.com
www.jabil.com
69
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Sanmina-SCI Systems Singapore Pte Ltd
With a strong technical and engineering
focus, Sanmina-SCI’s strategy also includes
the regionalisation of overhead functions
to make doing business in Asia easy for
the customer. It does this by establishing
commonality in systems, tooling and
procedures.
Headquartered in San Jose, California,
Sanmina-SCI is a leading EMS provider
focused on delivering complete end-toend manufacturing capabilities and highly
complex solutions to technology companies
around the world. Its customer-focused
business model provides its clients with
customised and flexible solutions across
a variety of end markets. Furthermore, its
continual focus on developing best-in-class
technologies, processes and performance
provides customised and adaptable
manufacturing solutions tailored to the
unique requirements of each customer.
Certifications
TS16949
TL 9000
The company boasts several facilities
in Singapore, each dedicated to its own
specialties. One facility offers strong
engineering support capability with a
product focus on high-density printed
circuit boards (PCBs) with mid- to high-layer
count. Serving the key market segments
of optical, microelectronics, automotive,
instrumentation, medical, defence and
aerospace, the facility provides one of the
most comprehensive PCB product portfolios
and product migration paths in the industry.
ISO 9001: 2000
AS 9100B
ISO 14001
FDA
registration
Two
other
facilities
specialise
in
manufacturing circuit board assemblies
(PCBAs), box build manufacturing and
systems integration. Both are registered
with the FDA and certified to ISO 13485,
making them safe and compliant facilities
for the manufacture of medical devices.
JPAL
certification
C-TPAT
certification
70
Key capabilities:
- Manufacturing of mid- to high-layer count printed circuit boards
(2 to 28 layers)
- Depth and laser drilling
- Wide range of surface finishes
- Product design services
- New product introduction
- Design for manufacturing
- Product, process and quality engineering
- Reliability test engineering
- Flying probe testing
- Surface insulation resistance testing
- Universal and dedicated testing
- Assembly of medical devices
- Electrical assembly
- Optical assembly
- RF engineering
- Testing development capabilities
- Build-to-order (BTO)
- Configure-to-order (CTO)
- New product introduction (NPI)
- DFx and failure analysis
Major equipment list:
- Screen printer – Dek Horizon
- Solder paste inspection – CyberOptics SE300
- SMD component placers – Fuji NXT
- SMT reflow – Heller
- Automated optical inspection – Orbotech Trion
- Aqueous cleaner – Aquastorm 200
- Wave-soldering – Electrovert Vectra
- Automated XRay inspection – Agilent
- Flying Probe – Takaya
- In-circuit tester – Agilent, GenRad & Teradyne
- Boundary Scan Tool – Asset Intertech, JTAG, Goepel & Corellis
- XRF RoHS Analyzer – Horiba
Overseas presence:
- Americas: Canada, Mexico, United States
- UK: England
- Europe: Finland, France, Germany, Hungary, Ireland, Scotland,
Spain, Sweden
- Israel
- Asia: China, Indonesia, Japan, Malaysia, Singapore, Thailand, India
71
Contact information:
Sanmina-SCI Systems Singapore Pte Ltd
2 Chai Chee Drive
Singapore 469044
Tel: +65 6245 7300
Fax: +65 6245 7600
Sanmina-SCI Electronics Singapore Pte Ltd
55 Penjuru Road
Singapore609140
Tel: +65 6266 4311
Email: info@sanmina-sci.com
www.sanmina-sci.com
Secondary
Processes
73
Precision Machining & Forming
Avionics & EMS
Secondary Processes
ACP Metal Finishing Pte Ltd
opening of ACP Aerospace in December
2006 to serve the MRO market, grinding,
machining, grit blasting and stress relief
services are offered. Today ACP operates
with 170 trained personnel in Joo Koon
Circle, Singapore.
For more than 25 years, ACP has built a first
class reputation as a metal surface finisher,
supporting the aerospace, bio-medical,
consumer electronics, optical, ordnance and
semi-conductor sectors in Singapore. ACP’s
principal activities centre on specialised
surface treatment and finishes that serve
the function of corrosion, scratch and wear
resistance, electrical insulation, cleanliness
and aesthetic enhancement. With the
74
Key Capabilities:
- Normal and hard anodising
- Chromic acid anodising
- Chromate conversion
- Passivation
- Plasma stripping
- Electroless nickel plating
- Chrome, nickel, cadmium, silver and tin plating
- Brush plating
- Grinding
- Machining
- Grit blasting
- Stress relief
Certifications
ISO 9001: 2000
AS 9100: 2004
ISO 14001: 2004
Major equipment list:
- Auto anodising line
- Semi-auto anodising line
- Manual anodising lines
- Plating lines
- Cylindrical grinding machines
SAR 145
FAR 145
Contact information:
ACP Metal Finishing Pte Ltd
No.6 Joo Koon Circle
Singapore 629037
Tel: +65 6863 8318
Fax: +65 6862 2989
Email: sales@acpanode.com.sg
www.acpanode.com.sg
www.acpaerospace.com.sg
NADCAP
75
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Applied Total Control Treatment Pte Ltd (ATC)
to be well-equipped and readily take on
new challenges to meet the stringent quality
expectations in metal finishing.
From a humble start-up in 2004, ATC has
transformed to become a leading player in
the metal finishing industry. The company
complies to the stringent Aerospace Quality
Standards and has achieved AS9100 and
Nadcap certification for the aerospace
industry.
ATC also attributes its success to its ability
to adapt and work closely with customers
to fulfil their increasing sophisticated needs
and special requirements for secondary
processes. It is through consistency of
quality, timely delivery, and service reliability
that ATC forges strategic partnerships with
its growing clientele and achieves total
customer satisfaction.
In order to maintain its strong capabilities
and technical expertise, the company
emphasises continuous improvement within
its team. ATC ensures internal growth by
continuous skills training that helps its team
76
Key capabilities:
One-stop solutions, specialising in metal finishing
services:
- Electroplating, plating, conversion coatings e.g. aluminium
anodising, aluminium conversion coating, zinc plating,
nickel plating, electroless nickel, silver plating, gold plating,
stainless steel passivation and electropolishing
- Coating services such as powder coating and spray painting
- Special cleaning processes
Major equipment list:
- Plant area: 35,000 sq ft (3,251 sq m) metal finishing facility and
10,000 sq ft (930 sq m) coating facility
- Class 1000 Cleanroom for special cleaning processes
- Well equipped Laboratory and Testing facilities
- Fully automated plating line
- De-ionised water system
- X-ray machine
- Spectrophotometer
- Sigmascope
Contact information:
Applied Total Control Treatment Pte Ltd (ATC)
6 Marsiling Lane (Block B)
Singapore 739145
Tel: +65 63621200
Fax: +65 63621768
Email: atc@atc-treatment.com
www.atc-treatment.com
77
Certifications
ISO 9001: 2000
AS 9100 (Rev B)
NADCAP
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Cast Laboratories Pte Ltd
Established in 1981, CAST Laboratories is
a leading independent testing and quality
centre in Singapore. It provides laboratory
and on-site testing, inspection services and
certification to the oil and gas, shipyard and
building and construction industries.
Certifications
Certificate of
accreditation in
civil engineering
testing
Certificate of
accreditation in
calibration and
measurement
It has been an accredited laboratory since
1988 under the Singapore Laboratory
Accreditation
Scheme
(SINGLAS),
administered by SPRING Singapore in the
field of civil engineering, non-destructive
testing, chemical and biological testing,
mechanical
testing,
calibration
and
measurement services.
The company prides itself on its strong
technical capabilities and its ability to
conduct testing with integrity and based on
internationally recognised standards.
Certificate of
accreditation
in mechanical
testing
Certificate of
accreditation in
chemical and
biological
Certificate of
accreditation in
non-destructive
testing
BizSafe
Enterprise Level
3 certificate
It has outstanding quality management
systems in place and has maintained
the Singapore Quality Class status since
1998. Its expertise and stringent quality
management system has ensured the
successful and efficient completion of many
major projects in Singapore.
Singapore
Quality Class
Award
78
Key capabilities:
- Building and construction materials testing
- Geotechnical investigation
- Mechanical testing
- Structural investigation
- Calibration
- Chemical and biological testing
- Non-destructive testing, radiography, magnetic particle test, etc
- Heat treatment
- Phased array inspection
Major equipment list:
- Compression machine unit test
- Memmert water bath
- Memmert oven
- Compression machine unit test 2000 KN
- Pull out tester (PROCEQ)
- Nuclear density gauge Troxler
- Nuclear gauge Humboldt
- Balance VMC VB-302A
- Balance model no. ES10k-10
- Windsor probe test system
- Temperature hybrid recorder
- Hydraulic jack Enerpac / SPX Power Team
- Temperature Chino temp. recorder
- Proving ring w/Dial gauge
- Instron M/C model no. 5585
- Balance Shinko Denshi model no. AJ-4200E (11 units)
- Universal testing machine
- Matest furnace
- Matest humidity chamber
- Flexural machine RMU
- Compression machine matest
- Radiography testing and gamma projector, x-ray, surveymeter beeper
- Positive material identification testor
- Auto ultrasonic
- Ultrasonic flaw detector
- Magnetic particle and AC / DC yoke, radiometer, UV lamp
- Transformer
- Programmer
- Recorder
- Hardness tester
- Thermocouple attachment unit
Overseas presence:
- Malaysia
- Thailand
- Indonesia
- Myanmar
79
Contact information:
Cast Laboratories Pte Ltd
27 Defu Lane 6
Singapore 539380
Tel: +65 6288 0080
Fax: +65 6288 9912
Email: chye_hwee@cast.com.sg
www.cast.com.sg
Precision Machining & Forming
Avionics & EMS
Secondary Processes
CEL Coatings Industries Pte Ltd
and complex surface finishing services.
The company has also successfully reengineered its production capacity to deliver
huge volumes of products with consistent
and superior quality.
CEL Coatings has been specialising in
surface treatments since 1984. With its
team of dedicated managers, engineers
and workers, the company has grown
to encompass over 200 employees and
manufacturing facilities occupying more
than 40,000 sq m (430,556 sq ft) today. Its
production lines are a mix of semi- to fully
automatic lines and cater for both high and
low volume production requirements.
With state-of-the-art facilities and best-inindustry operating processes, CEL Coatings
has evolved to become a sought-after
specialist in surface treatment services. Its
consistently high quality, fast turnaround
and competitive pricing make for a winning
formula that has helped the company
become a leader in the high precision metal
finishing industry.
In 1995, in recognition of the emergence
of a world-class cluster of industries
and support services in Singapore, CEL
Coatings upgraded its services from basic
electroplating activities to high-quality
80
Key capabilities:
- Yellow, blue and black zinc on steel
- Passivation on steel
- Electroless nickel on cold rolled steel, aluminium,
zinc die-cast and magnesium PTFE-electroless nickel
composite coating for steel
- Black electroless nickel on steel
- Satin tin cobalt on magnesium and steel
- Clear and yellow chromating on aluminium
- Gold on kovar steel and aluminium
- Copper on steel
- PTFE coatings on steel
- Copper, nickel, chrome on ABS
- Anti-friction coating
- Insulation coating
Certifications
ISO 9001: 2000
ISO 14001: 2004
OHSAS
18001: 2007
Overseas presence:
- China (Suzhou)
Contact information:
CEL Coatings Industries Pte Ltd
16 Benoi Place
Singapore 629934
Tel: +65 6861 7155
Fax: +65 6862 3386
Email: pauline@celcoatings.com
www.celcoatings.com
81
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Frontken (Singapore) Pte Ltd
Frontken is the industry leader of
surface metamorphosis solutions and its
complementary technologies in Southeast
Asia. The company possesses the unique
combination of surface and mechanical
engineering capabilities for servicing
and manufacturing of equipment and
its components (rotating and stationary
components of turbo-machineries or other
mechanical systems) from start to finish.
workforce of some 1,000 employees and
14 quality-certified engineering plants.
With footprints in Malaysia, Thailand, the
Philippines, Taiwan, China and Indonesia,
the company is well positioned to serve the
Asia Pacific region and beyond.
As testament to its commitment to
excellence,
Frontken’s
precision
manufacturing division, Chinyee Engineering
& Machinery Pte Ltd, clinched the Singapore
Aerospace Supplier Excellence award
presented by the AAIS in 2009.
Founded in 1996, Frontken is an established
presence in the region today with a combined
82
Certifications
Key capabilities:
- Thermal spray coating
- Cold build up coating
- Conversion coating
- Specialised welding
- Precision cleaning
- Abrasive blasting
- Machining and grinding
- Precision manufacturing
- Mechanical fitting and assembly
- Dynamic balancing
- Heat treatment
- In-situ machining
- Metal stitching
- Laser alignment
ISO 9001:2008
ISO 9001:2000
AS 9100:2004
ISO 14001:2004
Major equipment list:
- HVOF and plasma spray system complete with 6-axis
robotic system
- Semi-automated twin wire arc spray system and
flame spray systems
- Conventional and CNC lathe machine
- 3-, 4- and 5-Axis CNC milling machine
- Cylindrical grinding machine up to 8 tons
- Semi-automated plasma transfer arc welding machine - Dynamic balancing machine up to 22 tons
NADCAP
Overseas presence:
- China
- Malaysia
- Indonesia
- Philippines
- Taiwan
- Thailand
Contact Information:
Frontken (Singapore) Pte Ltd
Jurong Plant 1
156A Gul Circle
Singapore 629614
Tel: +65 6863 4500
Fax: +65 6863 4766
Email: info@frontken.com
www.frontken.com
83
Precision Machining & Forming
Avionics & EMS
Secondary Processes
GT Industrial Pte Ltd
GT Industrial and GT Baiker Metal Finishing
have been in the surface enhancement
business for the last 30 years. Both
companies have had great success in
providing unparalleled quality services to
major aerospace, oil and gas, and metal
fabrication companies. They are the only
independent shot peening and blasting
companies
with
Nadcap-accredited
certification since 2001 in Singapore.
Both possess the capabilities and a wide
range of machinery to handle complex
components. Its vibratory finishing services
and techniques are also widely used within
the aerospace and disk drive industries with
remarkable success.
84
Key capabilities:
- Shot peening
- Shot blasting
- Vibratory surface finishing
- Stain-free cutlery cleaning and maintenance
- Sole distributor for Walter Trowal machines, media and
compound
- Distributor of Electronic Inc Almen gauges, strips, blocks and
magna valves
- Distributor of Pometon shot peening and blasting media
Certifications
NADCAP –
Aerospace
quality systems
(AC 7004)
NADCAP–
Surface
enhancements
Rolls Royce
approvals – RPS
251, RPS 428
(shot peening),
RPS 708, control
of classified parts
Major equipment list:
- 5-axis shot peening machine
- Peening and blasting machines capable of
accommodating components with lengths of up to 40 m
- Blasting room capable of blasting large components
- Walther Trowal vibratory machines of various sizes
- Scanning electron machine
Boeing
approvals –
BAC 5730 shot
peening approval
Overseas presence:
- Kuala Lumpur, Malaysia
- Bangkok, Thailand
Contact information:
GT Industrial Pte Ltd / GT-Baiker Metal Finishing Pte Ltd
No. 10 Loyang Street
Singapore 508844
Tel: +65 65428993
Fax: +65 65429896
Email: info@gt-ind.com.sg
www.gt-ind.com.sg
Hamilton
Sunstrand
approvals
– PN 1430 shot
peening approval
GE approvals
– approved
for DH01 per
P11TF3, GE-A
conventional
Windsor
Airmotive
approvals –
approved vendor
for shot peening
SAM
– approved
vendor for shot
peening
ISO 9001:2000
85
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Hitech Heat Treatment Services Pte Ltd
it is relevant and meets the requirements
of every customer. Its decades’ worth of
experience has also endowed the company
with a keen sense of key standards required
for the various industries.
Established in 1986, Hitech specialises
in providing heat treatment services of
metals and alloys for the manufacturing
industries. These include the automotive,
marine, aviation, precision machining,
mould making, oil and gas and medical
sectors. It is a one-stop heat treatment
solutions provider that offers value-added
services which include failure analysis,
interpretation of a report to customers,
blueprinting solutions to problems, heat
treatment consultancy, laser welding repair
services, sourcing of special materials and
consumables/equipment, plus training and
cost improvement consultancy for toolings.
Hitech was the first company to receive
NADCAP accreditation in the Asia Pacific
region from PRI, Inc. USA.
At Hitech, quality is built, not inspected. Such
is its continual quest for excellence in its
field of work. The company has established
and consistently maintained an effective and
dynamic quality system, which ensures that
86
Key capabilities:
Vacuum heat treatment
- Hardening and tempering
- Solution treatment/homogenising
- Precipitation hardening/ageing
- Magnetic annealing/hydrogen cleaning
- Stress relieving/degassing
- Normalising/ annealing
- Baking/sintering/stabilisation
- Brazing/ braze and harden
- Carburising/recrystallisation
- Customised heat treatment
Certifications
ISO 9001:2008
EN/JISQ/
AS 9100:2004
-AS 9104A
NADCAP
AS 7003
Surface Treatment:
- Plasma nitriding/nitrocarburising (Plasnit)
- Plasma nitriding and oxidation (Plasox)
- Plasma-assisted CVD coating
- Plasma carburising of stainless steels
- Gas nitriding/nitrocarburising and oxidation
Protective atmosphere heat treatment:
- Hardening and tempering
- Carburising/carbonitriding
- Stress relieving/normalising/annealing/homogenising
- Austempering/marquenching
- Solution treatment and ageing
Other Services:
- Cryogenic (subzero) treatment
- Shrink-fitting
- Induction hardening/soldering
- Automated degreasing
- Induction hardening/soldering
- Automated degreasing
- Laser welding (mould repair/electronic parts weldings, etc.)
- Sales of specialty materials/heat treatment equipment and supplies
- Heat treatment consultancy/failure analysis/metallurgical laboratory services
Major equipment list:
−Vacuum furnaces
−Nitriding furnaces
−Protective atmospheric furnaces
−Conveyor-belt furnaces
−Shaker furnace
−Tempering furnaces
−Roll automated washing machine
−Laser welding machines
−Metallurgical laboratory
Contact information:
Hitech Heat Treatment Services Pte Ltd
57 Joo Koon Circle
Singapore 629071
Tel: +65 6863 2530
Fax: +65 6863 2534
www.hitech.sg
87
Precision Machining & Forming
Avionics & EMS
Secondary Processes
Singapore Epson Industrial Pte Ltd
Singapore Epson Industrial Pte Ltd (SEP) is
the Southeast Asian manufacturing base
of Seiko Epson Corporation. It boasts two
specialised divisions, namely Plating and
EMC.
SEP Plating Division was established in
1979 to provide surface finishing services.
Using the most advanced technology, a fully
equipped laboratory for monitoring and a
team of highly trained personnel, the plating
division delivers quality products that never
fail to satisfy expectations. It offers a flexible
approach to meeting logistics requirements
through shift-to-stock services, overseas
shipments and a one-stop service.
EMC Division was established in June
2009 to provide quality electromagnetic
compatibility tests. The company has since
expanded its business to include worldwide
customers with a focus on Southeast Asia.
88
Key capabilities:
- Plating services and surface treatment with a focus on
customisation
- Fully equipped laboratory, experienced R&D and plating teams
- Flexible approach to meet logistic requirements through shift-
to-stock services
- Engineering services
- Analysis on RoHS
- Elemental depth layer analysis
- Identification of organic contamination
- Morphology and quantitative elemental analysis of organic/
inorganic contamination
- Other customised services
- Plating services: gold, silver, palladium, palladium-nickel, electroless-nickel, electrolytic nickel, tin, copper, PVD & DLC
- Surface treatment: mechanical/chemical/electrolytic polishing, etching, passivation, quenching and annealing
Major equipment list:
- GD profiler
- Autolab
- Scanning electron microscope
- Electron dispersion x-ray
- Universal micro material tester
- Scanning electrochemical microscopy
- Roughness tester and others
Certifications
ISO 9001
ISO 14001
TS 16949
AS 9100
Pursuing
NADCAP
Testing Facilities:
- 10-m semi-anechoic chamber
- Full anechoic chamber
- Shield rooms
Contact information:
Singapore Epson Industrial Pte Ltd (Plating Division)
86/88 Second Lok Yang Road
Singapore 628162
Tel: +65 6268 2164
Fax: +65 6265 3566
Email: patrick.yeoh@sep.epson.com.sg
www.epson-plating.com.sg
Singapore Epson Industrial Pte Ltd (EMC Division)
1 Tuas Link 4
Singapore 637898
Tel: +65 6865 8355
Fax: +65 6897 7984
Email: lengguan.tan@sep.epson.com.sg
89
NOTES
Singapore Economic Development Board
250 North Bridge Road, #28-00 Raffles City Tower, Singapore 179101
Tel: +65 6832 6832 • Fax: +65 6832 6565
www.sedb.com
SPRING Singapore
2 Bukit Merah Central, Singapore 159835
Tel: +65 6278 6666 • Fax: +65 6278 6 6 67
www.spring.gov.sg