1
3
Release
Battery Cover
Turn both screws anti‐clockwise
to release battery door and
pull off cover using
the slot beneath the
LED torch.
2
Position lugs on battery door
in the phone first, and close it
up. Whilst still applying pressure
to the door beneath the screw
heads, turn screws clockwise
until resistance is felt, then add
a quarter turn more. The door
must be secured to ensure
watertight seal. Take care not
to over tighten.
Insert your SIM card
Insert SIM(s) and memory card
into the phone as shown
(contacts face down).
To insert SD card, slide
the metal clasp across
to the left and it will hinge
from the left. Place SD
card into position, then
close the metal clasp, and
slide it across to the right
to lock in place.
Replace
Battery Cover
4
Charge phone
for 8 hours
Please charge for
8 hours before
initial use.
•
•
•
•
•
•
•
:!!
•
•
Connected!to!GPRS!mobile!network!
Battery!is!drained!
Connected!to!Edge!mobile!network!
Battery!is!full!
Roaming!
Battery!is!half!full!
Mobile!network!signal!strength!
Battery!is!charging!
Searching!for!a!network!signal!
Bluetooth!is!on!
No!Signal!
Connected!to!Bluetooth!device!
No!SIM!card!installed!
Notification! Icons!
New!Text!or!email!message!
Alarm!is!set!
Incoming!call!
Missed!call!
Second!incoming!call!
Call!on!hold!
Location!enabled!
Currently!on!call!
•
•
"key
•
•
•
•
•
•
•
"(Only!applicable!to!Dual!SIM!handset)!
"(Only!applicable!to!Dual!SIM!handset)!