Ingram School of Engineering

advertisement
Ingram School of
Engineering
Roy F. Mitte Building, Room 5202
T: 512.245.1826 F: 512.245.7771
www.engineering.txstate.edu
Degree Programs Offered
Bachelor of Science (BS), major in Electrical Engineering
(Computer Engineering Specialization)
Bachelor of Science (BS), major in Electrical Engineering
(Micro and Nano Devices and Systems Specialization)
Bachelor of Science (BS), major in Electrical Engineering
(Networks and Communication Systems Specialization)
Bachelor of Science (BS), major in Industrial Engineering
Bachelor of Science (BS), major in Manufacturing Engineering
(General Manufacturing Concentration)
Bachelor of Science (BS), major in Manufacturing Engineering
(Mechanical Systems Concentration)
Bachelor of Science (BS), major in Manufacturing Engineering
(Semiconductor Manufacturing Concentration)
The BS with a major in Electrical Engineering provides students
the background that is essential for the conception, design, development, and manufacture of electrical, electronic and information technology products and systems. Students may specialize
in the areas of networks and communication systems, micro and
nano devices and systems, or computer engineering. Proficiency
in mathematics is especially important in Electrical Engineering.
In order to be admitted to the EE program, a student needs to be
qualified to take MATH 2417 or higher.
The BS with a major in Industrial Engineering provides students
the background that is essential for improving the productivity,
quality, safety, and cost effectiveness of all types of systems and
processes. Industrial engineers are typically engaged in the areas of
quality assurance, ergonomics, production and operations management, facilities design, work design, system optimization, information technology, and industrial safety.
The BS with a major in Manufacturing Engineering is designed to
provide students with the mathematics, science, management, engineering, and applications skills needed to become manufacturing
engineers. These engineers are typically responsible for promoting
manufacturability, process planning, tool design, cost estimation,
factory layout, work methods, quality assurance, automation, and
systems integration. The degree has a concentration in general manufacturing, mechanical systems or semiconductor/high technology
manufacturing. The BS with a major in Manufacturing Engineering
is accredited by ABET, Inc.
For information on engineering technology or industrial technology, please see the Department of Engineering Technology and
Physics section of this catalog.
The Ingram School of Engineering Mission Statement
1. To provide students with an exceptional education in various disciplines of engineering,
2. To establish, through dedicated faculty, a nationally recognized research program, preparing interested students to
achieve excellence in graduate studies and research, and
3. To serve the State of Texas and the nation by creating highly
skilled, diverse, and motivated professionals capable of technological innovation and dedicated to the improvement of society.
The Ingram School of Engineering Vision Statement
The Ingram School of Engineering will be a nationally recognized
institution of higher education, serving students and employers
with a complete set of accredited engineering programs supported
by a faculty which maintains high standards of teaching, research,
and service. To accomplish this vision, we will:
1. Engage undergraduate and graduate students with innovative, multidisciplinary, and nationally recognized funded
research programs,
2. Emphasize quality undergraduate and graduate education
using a practical, interactive, and contemporary learning
environment,
3. Produce first-generation professional college graduates as
part of an HSI-designated university; be recognized for
exceptional community service; and create tight bonds with
alumni who will serve as professional mentors, sponsors,
and advisors.
4. Promote a student-centered culture based on collegiality, scholarship, enthusiasm, integrity, and mutual respect
among diverse faculty, staff, and students.
The Electrical Engineering Mission Statement &
Objectives
Our mission is:
To lead students to be innovative, ethical engineering professionals
through solid education at the undergraduate level, by providing
opportunities to participate in research, and by responding to
the needs of the Central Texas region, the state of Texas, and the
nation. We achieve this mission by:
* Engaging colleagues and students in new and more effective
ways to transmit knowledge to the next generation of electrical engineers.
* Engaging colleagues and students in pioneering, scholarly, multidisciplinary research efforts.
* Creating an inclusive environment which emphasizes ethics
and integrity and fosters creativity, appreciation for all ideas,
and respect for others
* Seeking and maintaining bonds with our alumni and the industries which hire them.
* Maintaining a student-centered atmosphere for undergraduate
education and research.
The objectives of the program are to produce graduates who:
1. Analyze, design, develop, optimize, and implement complex
systems in the context of modern interdisciplinary engineering
work.
2. Contribute to the solution of practical problems in industrial, service, and government organizations by applying skills acquired
2012-2014 Undergraduate Catalog 327
through formal and lifelong learning.
3. Enjoy fulfilling engineering careers, including professional advancement, entrepreneurship, and the pursuit of graduate studies.
4. Practice engineering while observing appropriate technological,
organizational, societal, global, and ethical contexts.
The Industrial Engineering Mission Statement &
Objectives
Our mission is:
To provide an excellent and innovative education setting to our
students so they can learn and discover how complex systems
work better. The IE program strives to maintain a comprehensive
curriculum that enables students to become leading engineers
and/or creative researchers in the global marketplace and/or in
graduate studies. The program seeks to collaborate with private
and public sectors in the search of methodologies and creative
solutions to problems that contribute to the advancement of
education, technology, and professional development. Through
plans and activities that search to embrace a student population of
strong diversity, the program attempts to be a significant provider
of global workforce.
The objectives of the program are to produce graduates who:
1. Perform as industry leaders in the global marketplace, capable
of successfully planning, controlling, and implementing
large-scale projects.
2. Understand and apply the principles of science, technology, engineering, and math involving industry-relevant
problems.
3. Contribute to the profitable growth of industrial economic
sectors by using IE analytical tools, effective computational
approaches, and systems thinking methodologies.
4. Maintain high standards of professional and ethical
responsibility.
5. Flourish and work effectively in diverse, multicultural environments emphasizing the application of teamwork and
communication skills.
6. Practice life-long learning to sustain technical currency and
excellence throughout one’s career. Promote the profession
and its benefits to society.
The Manufacturing Engineering Mission Statement &
Objectives
Our mission is:
* To sustain a quality, student-centered, industry-oriented engineering curriculum.
* To attract students and prepare them with the knowledge,
practical skills, and abilities to perform as highly competent
engineers in the global marketplace and/or in graduate
studies.
* To produce graduates skilled in materials and manufacturing
processes: process; assembly and product engineering;
manufacturing competitiveness and systems design.
328 Texas State University-San Marcos
The objectives of the program are to produce graduates who:
1. Perform as engineering leaders in the global marketplace.
2. Understand and apply the principles of math, science, and
engineering in design and manufacturing related activities.
3. Contribute to the profitable growth of manufacturing
businesses.
4. Maintain high standards of professional and ethical
responsibility.
5. Practice life-long learning.
Bachelor of Science (BS)
Major in Electrical Engineering
(Micro and Nano Devices and Systems Specialization)
Minimum required: 137 semester hours
General Requirements:
1. In order to declare Electrical Engineering as a major, students must meet one of the following prerequisites: ACT Math score of 24 or higher, SAT Math score of 520 (re-centered) or
higher, or credit for one of the following math courses with a grade of “C” or higher: MATH 1315, 1317, 1319, or 1329. Students who do not meet the above prerequisites may
choose Pre- Electrical Engineering as their major. Pre- Electrical Engineering students who complete one of the following math courses with a grade of “C” or higher may declare
Electrical Engineering as their major: MATH 1315, 1317, 1319, or 1329.
2. All Electrical Engineering majors must complete Electrical Engineering (EE) course prerequisites with a grade of “C” or higher.
3. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
4. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301 or ECO 2314,. See the Academic Services section of this catalog for the English literature requirements.
5. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two semesters
of the same modern language must be taken at the college level.
6. Electrical Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st Semester
Freshman Year - 2nd Semester
Freshman Year - Summer
Sophomore Year - 1st Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1341, 1141
COMM 1310
MATH 2471
US 1100
ENG 1310
4
3
4
1
3
PHYS 1430
ENGR 2300
MATH 2472
ENG 1320
HIST 1310
4
3
4
3
3
ENG Lit (see gen. req. 2)
HIST 1320
PFW one course
PHIL 1305 or 1320
3
3
1
3
EE 2400
MATH 3323
MATH 3373
PHYS 2425
CS 1428
4
3
3
4
4
Total
15
Total
17
Total
10
Total
18
Sophomore Year - 2nd Semester
Sophomore Year - Summer
Junior Year - 1st Semester
Junior Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
EE 2420
MATH 3375
MATH 3377
PHYS 2435
ECO 2301
4
3
3
4
3
POSI 2310
PFW one course
3
1
EE 3400
EE 3340
EE 3420
IE 3320
POSI 2320
4
3
4
3
3
MFGE 4392
EE 3350
EE 3355
EE 3370
ART, DAN, MU, or TH 2313
3
3
3
3
3
Total
17 Total
4
Total
17
Total
15
Senior Year - 1st Semester
Senior Year - 2nd Semester
Course
Hr
Course
Hr
EE 4350
EE 4352
EE 4390
ENGR 3315
3
3
3
3
EE 4355 or MFGE 4394
EE 4321, 4351, 4353, 4354, or 4358
EE 4391
3
6
3
Total
12
Total
12
2012-2014 Undergraduate Catalog 329
Bachelor of Science (BS)
Major in Electrical Engineering
(Networks and Communication Systems Specialization)
Minimum required: 137 semester hours
General Requirements:
1. In order to declare Electrical Engineering as a major, students must meet one of the following prerequisites: ACT Math score of 24 or higher, SAT Math score of 520 (re-centered)
or higher, or credit for one of the following math courses with a grade of “C” or higher: MATH 1315, 1317, 1319, or 1329. Students who do not meet the above prerequisites may
choose Pre- Electrical Engineering as their major. Pre- Electrical Engineering students who complete one of the following math courses with a grade of “C” or higher may declare
Electrical Engineering as their major: MATH 1315, 1317, 1319, or 1329.
2. All Electrical Engineering majors must complete Electrical Engineering (EE) course prerequisites with a grade of “C” or higher.
3. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
4. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301 or ECO 2314. See the Academic Services section of this catalog for the English literature requirements.
5. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two
semesters of the same modern language must be taken at the college level.
6.
Electrical Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st Semester
Freshman Year - 2nd Semester
Freshman Year - Summer
Sophomore Year - 1st Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1341, 1141
MATH 2471
US 1100
ENG 1310
COMM 1310
4
4
1
3
3
PHYS 1430
ENGR 2300
MATH 2472
ENG 1320
HIST 1310
4
3
4
3
3
ENG Lit (see gen. req. 2)
HIST 1320
PFW one course
PHIL 1305 or 1320
3
3
1
3
EE 2400
MATH 3323
MATH 3373
PHYS 2425
CS 1428
4
3
3
4
4
Total
15
Total
17
Total
10
Total
18
Sophomore Year - 2nd Semester
Sophomore Year - Summer
Junior Year - 1st Semester
Junior Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
EE 2420
MATH 3375
MATH 3377
PHYS 2435
ECO 2301
4
3
3
4
3
POSI 2310
PFW one course
3
1
EE 3400
EE 3340
ENGR 3315
IE 3320
POSI 2320
4
3
3
3
3
EE 3420
EE 3350
EE 3355
EE 3370
ART, DAN, MU, or TH 2313
4
3
3
3
3
Total
17
Total
4
Total
16
Total
16
Senior Year - 1st Semester
Senior Year - 2nd Semester
Course
Hr
Course
Hr
EE 4350
EE 4370
EE 4323 or 4377
EE 4390
3
3
3
3
EE 4372
EE 4321, 4355, 4374, 4378 (choose two)
EE 4391
3
6
3
Total
12 Total
330 Texas State University-San Marcos
12
Bachelor of Science (BS)
Major in Electrical Engineering
(Computer Engineering Specialization)
Minimum required: 136 semester hours
General Requirements:
1. In order to declare Electrical Engineering as a major, students must meet one of the following prerequisites: ACT Math score of 24 or higher, SAT Math score of 520 (re-centered) or
higher, or credit for one of the following math courses with a grade of “C” or higher: MATH 1315, 1317, 1319, or 1329. Students who do not meet the above prerequisites may choose
Pre- Electrical Engineering as their major. Pre- Electrical Engineering students who complete one of the following math courses with a grade of “C” or higher may declare Electrical
Engineering as their major: MATH 1315, 1317, 1319, or 1329.
2. All Electrical Engineering majors must complete Electrical Engineering (EE) course prerequisites with a grade of “C” or higher.
3. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
4. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301 or ECO 2314. See the Academic Services section of this catalog for the English literature requirements.
5. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two semesters
of the same modern language must be taken at the college level.
6.
Electrical Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st
Semester
Freshman Year - 2nd Semester
Sophomore Year - 1st Semester
Sophomore Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1341, 1141
CS 1428
MATH 2471
US 1100
ENG 1310
PFW one course
4
4
4
1
3
1
PHYS 1430
CS 2308
MATH 2472
ENG 1320
EE 2420 or CS 2420
4
3
4
3
4
ENG Literature (see gen. req. 4)
MATH 2358
EE 2400
PHYS 2425
MATH 3323
3
3
4
4
3
EE 3420
MATH 3398
MATH 3373
EE 3400
CS 3358
4
3
3
4
3
Total
17
Total
18
Total
17
Total
17
Junior Year - 1st Semester
Junior Year - 2nd Semester
Senior Year - 1st Semester
Senior Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
HIST 1310
ECO 2301
PFW
CS 4328
EE 3350
MATH 3377
3
3
1
3
3
3
HIST 1320
POSI 2310
CS 3339
EE 3370
EE 4352
IE 3320
3
3
3
3
3
3
PHIL 1305 or 1320
POSI 2320
CS 3398
EE 4372 or CS 4310
EE 4377
EE 4390
3
3
3
3
3
3
ART, DAN, MU, or TH 2313
COMM 1310
EE 4391
EE 4321, 4323, CS 4332, 4388 (choose 6
hours)
3
3
3
Total
16 Total
18
Total
15
18 Total
6
2012-2014 Undergraduate Catalog 331
Bachelor of Science (BS)
Major in Industrial Engineering
Minimum required: 135 semester hours
General Requirements:
1. In order to declare Industrial Engineering as a major, students must meet one of the following prerequisites: ACT Math score of 24 or higher, SAT Math score of 520 (re-centered) or
higher, or credit for one of the following math courses with a grade of “C” or higher: MATH 1315, 1317, 1319, or 1329. Students who do not meet the above prerequisites may choose
Pre-Industrial Engineering as their major. Pre-Industrial Engineering students who complete one of the following math courses with a grade of “C” or higher may declare Industrial
Engineering as their major: MATH 1315, 1317, 1319, or 1329.
2. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
3. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301. See the Academic Services section of this catalog for the English literature requirements.
4. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two semesters
of the same modern language must be taken at the college level.
5. Six hours of IE electives to be chosen from: IE 4330 (fall), IE 4340 (fall); MFGE 4367 (spring), MFGE 4392 (spring), IE 4399A, IE 4399B, IE 4399C, IE 4399D.
6.
Industrial Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st
Semester
Freshman Year - 2nd Semester
Sophomore Year - 1st Semester
Sophomore Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1341, 1141
ENG 1310
ENGR 1313
MATH 2471
US 1100
4
3
3
4
1
PHYS 1430
ENG 1320
ENGR 2300
HIST 1310
MATH 2472
4
3
3
3
4
PHYS 2425
COMM 1310
MATH 3377
POSI 2310
MFGE 2332
HIST 1320
4
3
3
3
3
3
CS 1428
MATH 3323
MATH 3375
ART, DAN, MU, or TH 2313
ECO 2301
POSI 2320
4
3
3
3
3
3
Total
15
Total
17
Total
19
Total
19
Junior Year - 1st Semester
Junior Year - 2nd Semester
Senior Year - 1st Semester
Senior Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
ENGR 3311
ENGR 3315
ENGR 3373
IE 3320
PHIL 1305 or 1320
PFW one course
3
3
3
3
3
1
IE 3310
IE 3330
IE 3340
IE 3360
ENG Literature (see gen. req. 3)
PFW one course
3
3
3
3
3
1
IE 4310
IE 4355
IE 4380
IE Elective (see gen. req. 5)
IE 4360
IE 4370
3
3
3
3
3
3
IE 4320
IE 4350
IE Elective (see gen. req. 5)
IE 4390
MFGE 4396
3
3
3
3
3
Total
16 Total
18
Total
15
332 Texas State University-San Marcos
16 Total
Bachelor of Science (BS)
Major in Manufacturing Engineering
(General Manufacturing Concentration)
Minimum required: 132 semester hours
General Requirements:
1. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
2. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301. See the Academic Services section of this catalog for the English literature requirements.
3. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two semesters
of the same modern language must be taken at the college level.
4. Six hours of Manufacturing Processes elective to be chosen from:, TECH 4330 (fall), MFGE 4355, MFGE 4357, MFGE 4367 (spring), or MFGE 4392 (spring), MFGE 4399A, MFGE
4399B, or MFGE 4399C.
5. Three to four hours of Math/ Science elective to be chosen from: MATH 3373, MATH 3330, PHYS 2435, PHYS 3315, or CHEM 1342 and 1142.
6.
Manufacturing Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st Semester
Freshman Year - 2nd Semester
Sophomore Year - 1st Semester
Sophomore Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1341, 1141
ENGR 1313
MATH 2471
US 1100
ENG 1310
PFW one course
4
3
4
1
3
1
PHYS 1430
ENGR 2300
ENG 1320
MATH 2472
COMM 1310
4
3
3
4
3
IE 3320
MATH 3323
MFGE 2332
PHYS 2425
HIST 1310
PFW one course
3
3
3
4
3
1
CS 1428
MATH 3375
ART, DAN, MU, or TH 2313
ECO 2301
HIST 1320
4
3
3
3
3
Total
16
Total
17
Total
17
Total
16
Sophomore Year - Summer
Junior Year - 1st Semester
Junior Year - 2nd Semester
Senior Year - 1st Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
MGT 3303
MATH 3377
3
3
ENGR 3311
ENGR 3373
Math/Science Elective (see gen. req. 5)
PHIL 1305 or 1320
MFGE 3316
3
3
3-4
3
3
ENGR 3315
IE 3330
IE 3360
MFGE 4365
POSI 2310
3
3
3
3
3
MFGE 4363
MFGE 4395
Manufacturing Processes (see gen. req. 4)
POSI 2320
IE 4355
3
3
3
3
3
Total
6
Total
15-16
Total
15
Total
15
Senior Year - 2nd Semester
Course
Hr
MGT 4330
MFGE 4376
MFGE 4396
Manufacturing Processes (see gen. req. 4)
ENG Literature (see gen. req. 2)
3
3
3
3
3
Total
15
2012-2014 Undergraduate Catalog 333
Bachelor of Science (BS)
Major in Manufacturing Engineering
(Mechanical Systems Concentration)
Minimum required: 132 semester hours
General Requirements:
1. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
2. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301. See the Academic Services section of this catalog for the English literature requirements.
3. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two
semesters of the same modern language must be taken at the college level.
4. Six hours of Mechanical Systems elective to be chosen from: TECH 4330, MFGE 4367, MFGE 4392, MFGE 4399A, MFGE 4399B or MFGE 4399C.
5. Manufacturing Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st Semester
Freshman Year - 2nd Semester
Sophomore Year - 1st Semester
Sophomore Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1141, 1341
ENGR 1313
MATH 2471
US 1100
ENG 1310
PFW one course
4
3
4
1
3
1
ENGR 2300
MATH 2472
PHYS 1430
COMM 1310
ENG 1320
3
4
4
3
3
MFGE 2332
MATH 3323
IE 3320
PHYS 2425
HIST 1310
PFW one course
3
3
3
4
3
1
IE 3330
MATH 3375
CS 1428
ECO 2301
HIST 1320
3
3
4
3
3
Total
16
Total
17
Total
17
Total
16
Sophomore Year - Summer
Junior Year - 1st Semester
Junior Year - 2nd Semester
Senior Year - 1st Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
MATH 3377
PHIL 1305 or 1320
3
3
MFGE 3316
ENGR 3311
ENGR 3315
ENGR 3373
POSI 2310
3
3
3
3
3
MFGE 4365
MFGE 4396
IE 3360
PHYS 3315
ENG Literature (see gen. req. 2)
3
3
3
3
3
MFGE 4357
MFGE 4363
MFGE 4395
IE 4355
Mechanical Systems Elective (see gen. req. 4)
3
3
3
3
3
Total
6
Total
15
Total
15
Total
15
Senior Year - 2nd Semester
Course
Hr
MFGE 4355
MFGE 4376
Mechanical Systems Elective (see gen. req. 4)
POSI 2320
ART, DAN, MU, or TH 2313
3
3
3
3
3
Total
15
334 Texas State University-San Marcos
Bachelor of Science (BS)
Major in Manufacturing Engineering
(Semiconductor Manufacturing Concentration)
Minimum required: 139 semester hours
General Requirements:
1. A minimum of 9 writing intensive hours and a total of 36 advanced hours are required to graduate. An advanced course is one that is numbered above 3000 and below 5000.
2. Departmental requirements that also satisfy the general education core curriculum requirements for the following components: mathematics- MATH 2471; natural science- CHEM
1341/1141 and PHYS 1430; and social science- ECO 2301. See the Academic Services section of this catalog for the English literature requirements.
3. If two years of the same language are taken in high school, then no additional language hours will be required for the degree. In the absence of such high school language, two
semesters of the same modern language must be taken at the college level.
4. Three semester hours of Semiconductor Manufacturing elective to be chosen from: PHYS 4320 (see dept.), PHYS 4340 (see dept.), or MFGE 4394 (see dept.).
5. Three to four hours of Math/Science elective chosen from: MATH 3330, MATH 3373, PHYS 2435, PHYS 3315, or CHEM 1342 & 1142.
6.
Manufacturing Engineering degrees include all the courses required for an Applied Mathematics Minor.
Freshman Year - 1st Semester
Freshman Year - 2nd Semester
Sophomore Year - 1st Semester
Sophomore Year - 2nd Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
CHEM 1141, 1341
ENGR 1313
MATH 2471
US 1100
ENG 1310
PFW one course
4
3
4
1
3
1
ENGR 2300
MATH 2472
PHYS 1430
COMM 1310
ENG 1320
3
4
4
3
3
IE 3320
MATH 3323
MFGE 2332
PHYS 2425
HIST 1310
PFW one course
3
3
3
4
3
1
CS 1428
MATH 3375
ART, DAN, MU, or TH 2313
ECO 2301
HIST 1320
4
3
3
3
3
Total
16
Total
17
Total
17
Total
16
Sophomore Year - Summer
Junior Year - 1st Semester
Junior Year - 2nd Semester
Senior Year - 1st Semester
Course
Hr
Course
Hr
Course
Hr
Course
Hr
MGT 3303
MATH 3377
EE 2400
PHIL 1305 or 1320
3
3
4
3
ENGR 3311
ENGR 3373
TECH 4374 or EE 2420
Math/Science Elective (see gen. req. 5)
MFGE 3316
3
3
3-4
3-4
3
MFGE 4392
MFGE 4365
IE 3330
IE 3360
POSI 2310
3
3
3
3
3
IE 4355
MFGE 4363
MFGE 4395
ENGR 3315
POSI 2320
3
3
3
3
3
Total
13 Total
15-17
Total
15
Total
15
Senior Year - 2nd Semester
Course
Semiconductor Manufacturing Elective (see gen. req. 4)
MGT 4330
ENG Literature (see gen. req. 2)
MFGE 4376
MFGE 4396
3
3
3
3
3
Total
15
2012-2014 Undergraduate Catalog 335
Courses in Electrical Engineering (EE)
2400 Circuits I. (3-2) This course provides an introduction to
the profession of Electrical Engineering and its specialties.
Fundamental DC and sinusoidal steady-state circuit analysis
techniques and properties of electrical components are studied, and laboratory skills are developed. Analysis techniques
include Ohm’s law, power, Kirchoff ’s law, and Thevenin and
Norton equivalent circuits. Prerequisites: MATH 2471.
2420 Digital Logic. (3-2) An introduction to fundamental computer technologies, including Boolean logic design, logic circuits and devices, and basic computer hardware are studied.
Laboratories provide hands-on experience with electricity,
combinational and sequential digital circuits, and computer
hardware. Prerequisite: C or higher in CS1428.
3340 Electromagnetics. (3-0) Wave propagation, Maxwell’s
equations, transmission lines, wave guides, and antennas.
Prerequisites: MATH 3373 and PHYS 2435. Corequisite:
EE 3300 or 3400.
3350 Electronics I. (3-3) Analysis and design of active device
equivalent circuits with emphasis on transistors, switching
circuits, and operational amplifiers. Prerequisites: EE 3300
or 3400 with a C or better.
3355 Solid State Devices. (3-0) Semiconductor materials, principles of carrier motion, operating principles and circuit
models for diodes, bipolar transistors and field-effect transistors. Introduction to integrated circuits. Prerequisites: EE
3300 or 3400 with a C or better.
3370 Signals and Systems. (3-0) Frequency domain representation
of signals and systems and frequency domain concepts for
circuit analysis and design. Transfer function and frequency
response, Laplace and z-transforms, Fourier series, Fourier
transform, and sampling. Prerequisites: EE 3300 or 3400
with a C or better.
3400 Circuits II. (3-2) This course includes a brief review of EE
2400, transient analysis, application of Laplace transforms,
Bode plots, and network principles. Material learned in EE
2400 is extended and applied here. Prerequisites: EE 2400
and Math 3323.
3420 Microprocessors. (3-3) Introduction to microprocessors, principles of operation, assembly language programming, timing
analysis, and I/O interfacing. Prerequisites: 3 hrs from EE
2320, EE 2420 or CS 2420 with a C or better. (WI)
4321 Digital Systems Design Using HDL. (3-0) This course will
cover the design of digital systems using HDL including
implementation of custom microprocessor and peripheral
architectures. Prerequisites: EE 3420.
4323 Digital Image Processing. (3-0) This course provides the necessary fundamental techniques to analyze and process digital
images. It covers principles, concepts, and techniques of digital image processing and computer vision. Prerequisites: EE
3420, CS 2308.
4350 Electronics II. (3-3) Analysis and design of integrated circuits, feedback, and frequency response. Prerequisites: EE
3350.
4351 Fundamentals of Electroceramics. (3-3) Introduction to
binary and ternary phase diagrams, non-centro-symmetric
crystal structures and symmetry groups, nonlinear dielectrics
(including ferroelectricity, piezoelectricity, pyroelectricity),
336 Texas State University-San Marcos
nonlinear magnetics, oxide wideband gap semiconductors,
detectors and sensors, brief introduction to MEMS, radhard
electronics, and spintronics technology. Research oriented
labs related to materials processing, characterization, fabrication, and testing. Prerequisite: ENGR 2300 or equivalent;
Co-requisite: EE3355; GPA of 2.25 or higher.
4352 Introduction to VLSI Design. (3-1) Analysis of design of
CMOS integrated circuits. Introduction to CAD tools for
VLSI design. Prerequisites: CS 2420/EE 2420, EE 3350.
4353 Fundamentals of Advanced CMOS Technology. (3-0)
Key concepts of advanced semiconductor technology
including Moore’s law, transition from NMOS to CMOS,
CMOS scaling, high-K gate dielectrics, metal electrodes,
source/drain scaling technology, new channel materials
replacing silicon, and three dimensional device structures.
Prerequisite: EE 3355.
4354 Flexible Electronics. (3-0) This course will cover the materials
systems, processes, device physics and applications of flexible
electronics. The materials range from amorphous and nanocrystalline silicon, organic and polymeric semiconductors to
solution cast films of carbon nanotubes. Real device discussions include high speed transistors, photovoltaics, flexible
flat-panel displays, medical image sensors, etc. Prerequisites:
EE 3350, EE 3355, and EE 4350 or permission of the
instructor.
4355 Analog and Mixed Signal Design. (3-2) Operational amplifier
design applications, feedback, offset, stability, and compensation. Introduction to random signals and noise, discrete
time circuitry analog-to-digital converters, and digital-toanalog converters. Prerequisites: EE 3370 and 4350.
4358 Introduction to Microelectromechanical Systems. (3-1)
This course will cover fabrication techniques for microelectromechanical devices and systems as well as provide an
introduction to the design of micromechanical transducers.
Corequisite: MFGE 4392.
4370 Communication Systems. (3-3) Transmission of signals
through linear systems, analog and digital modulation, filtering, and noise. Prerequisites: EE 3370, IE 3320, and 3 hrs
from EE 3300 or EE 3400 with a C or better.
4372 Communication Networks. (3-1) Data communication
concepts, protocols, algorithms, 7-layer OSI model, physical media, LAN architecture and components, Ethernet,
FDDI, TCP/IP, and related standards. Prerequisite: 3 hrs
from EE 2300 or EE 2400 and 3 hrs from EE 3320 or EE
3420 with a C or better.
4374 Introduction to Wireless Communication. (3-1) Principles,
practice, and system overview of mobile systems. Modulation,
demodulation, coding, encoding, and multiple access techniques. Prerequisites: EE 4370.
4376 Introduction to Telecommunications. (3-1) Fundamentals
of telecommunications, telephone networks, switching and
transmission systems, circuit and packet switching, cell processing, and queuing theory and applications. Prerequisite:
None, Co-requisite: EE 4370.
4377 Introduction to Digital Signal Processing. (3-1) Discrete systems, convolution, spectral analysis, and FIR and IIR filter
design. Prerequisites: EE 3370.
4378 Data Compression and Error Control Coding. (3-2)
Introduction to information theory, information content
of messages, entropy and source coding, data compression,
channel capacity data translation codes, and fundamentals
of error correcting codes. Prerequisite: None, Corequisite:
EE 4370.
4390 Electrical Engineering Design I. (1-3) This course is a teambased design of a system or component, which will include
oral presentations and written reports. Corequisites: EE
4350, EE 4352 or EE 4370. Prerequisites: EE 3350, EE
3370, and EE 3420. (WI)
4391 Electrical Engineering Design II. (1-3) Advanced team-based
design of a system or component, which will include oral
presentations and written reports. Prerequisites: EE 4390.
(WI)
4399 Special Topics in Electrical Engineering. (3-0) This course will
cover advanced topics that cannot be fitted into a regular course
in the curriculum. Prerequisite: Faculty advisor approval.
4399A Dynamic Data Acquisition and Analysis. (3-0)
4399B Overview of Information Theory and Coding. (3-0)
4399C Digital Systems Design Using VHDL. (3-0) Design of
digital systems using VHDL including implementation
of custom microprocessor and peripheral architectures.
Prerequisites: EE 3420, CS 2308.
4399E Digital Image Processing. (3-0) This course provides the
necessary fundamental techniques to analyze and process
digital images. It covers principles, concepts, and techniques of digital image processing and computer vision.
Prerequisites: EE 3420, CS 2308.
4399F Fundamentals of Electroceramics. (3-3) Introduction to
binary and ternary phase diagrams, non-centro-symmetric
crystal structures and symmetry groups, nonlinear dielectrics
(including ferroelectricity, piezoelectricity, pyroelectricity),
nonlinear magnetics, oxide wideband gap semiconductors,
detectors and sensors, brief introduction to MEMS, radhard
electronics, and spintronics technology. Research oriented
labs related to materials processing, characterization, fabrication, and testing. Prerequisite: ENGR 2300 or equivalent;
Co-requisite: EE 3355; GPA of 2.25 or higher.
4399G Fundamentals of Advanced CMOS Technology. (3-0)
Key concepts of advanced semiconductor technology
including Moore’s law, transition from NMOS to CMOS,
CMOS scaling, high-K gate dielectrics, metal electrodes,
source/drain scaling technology, new channel materials
replacing silicon, and three dimensional device structures.
Prerequisite: ENGR 3355.
4399H Flexible Electronics. (3-0) This course will cover the materials systems, processes, device physics and applications of
flexible electronics. The materials range from amorphous
and nanocrystalline silicon, organic and polymeric semiconductors to solution cast films of carbon nanotubes. Real
device discussions include high speed transistors, photovoltaics, flexible flat-panel displays, medical image sensors, etc.
Prerequisite: EE 3350
Courses in Engineering (ENGR)
1313 Engineering Design Graphics. (2-2) An introductory communications course in the tools and techniques utilized to
produce various types of working drawings. Principles of
multiview projections, geometric relationships, shape and size
description, and pictorial methods are included with emphasis
on technical applications and design problem solving.
2300 Materials Engineering. (3-0) Structure, properties and behavior of engineering materials including metals, polymers,
composites and ceramics. Mechanical, electrical, magnetic,
thermal, and optical properties are covered. Prerequisites:
MATH 1315; CHEM 1341.
3190 Cooperative Education. (0-1) Completion of technical/engineering practice-related special projects. Projects must relate
to students' major and result in a term paper. Prerequisite:
Approval of program coordinator.
3311 Mechanics of Materials. (3-1) This course covers the principles of mechanic materials and includes the following
topics: stress and strain; elastic modulus and Poisson's ratio;
constitutive equations; torsion; bending; axial, shear and
bending moment diagrams; deflection of beams; and stability of columns. Prerequisite: MATH 3375.
3315 Engineering Economic Analysis. (3-0) Interest formulas,
economic equivalence, rate of return analysis, techniques of
economic analysis for engineering decisions and an introduction to cost estimation. Prerequisite: MATH 1315.
3360 Structural Analysis. (3-1) Structural engineering fundamentals to include design loads, reactions, force systems, functions of a structure, and the analysis of statically determinate
and indeterminate structures by classical and modern techniques. Prerequisite: ENGR 3311.
3373 Circuits and Devices. (3-1) DC and AC circuit analysis,
network theorems, electromechanical devices, electronic
devices and an introduction to amplifiers, oscillators and
operational amplifiers. Prerequisite: PHYS 2425.
4390 Internship. (0-20) Supervised on-the-job professional learning experience in engineering and other technical areas. This
course provides practical work experience in their particular
field of interest.
4395 Independent Studies in Engineering. (3-0). Open to undergraduate students on an independent basis by arrangement
with the faculty member concerned. Requires department
chair approval. Repeatable for credit with different emphasis. Prerequisite: junior or senior standing.
Courses in Industrial Engineering (IE)
3310 Project Management for Engineers. (3-0) Basic principles
governing the efficient and effective management of engineering projects. Topics include project planning, scheduling, and cost estimation procedures. Prerequisite: ENGR
3315. (WI)
3320 Engineering Statistics. (3-1) Fundamentals of probability and
statistical inference for engineering applications, probability
distributions, parameter estimation, hypothesis testing, and
analysis of variance. Prerequisite: MATH 2472.
3330 Quality Engineering. (3-0) Quality assurance systems, quality
costs, statistical quality control, and approaches for engineering
quality into products and processes. Prerequisite: IE 3320.
3340 Operations Research. (3-0) This course teaches models in
operations research including linear programs, the simplex
method, duality theory, sensitivity analysis, integer programs, and network flows. The emphasis is in learning to
recognize, formulate, solve, and analyze practical industrial
2012-2014 Undergraduate Catalog 337
problems. The course also teaches commercial mathematical
programming languages. Prerequisites: CS 1428, MATH
3377, ENGR 3315.
3360 Methods Engineering and Ergonomics. (3-0) This course is a
survey of methods for assessing and improving performance
of individuals and groups in organizations. Techniques
include various basic industrial engineering tools, work
analysis, data acquisition and application, performance evaluation and appraisal, and work measurement procedures.
Prerequisite: IE 3320.
4310 Statistical Design of Experiments. (3-0) Statistically designed
experiments for engineering applications. Topics include
analysis of variance, randomized complete block designs,
factorial designs, empirical models generated from controlled experiments, and response surfaces. Prerequisite: IE
3320.
4320 Integrated Production Systems. (3-0) Basic concepts in the
design and control of integrated production systems to
include forecasting, inventory models, material requirements planning, scheduling, planning, and shop floor
control. Coverage will include both traditional and kanban
systems. Prerequisite: IE 3340.
4330 Reliability Engineering. (3-0) Reliability of components and
systems, reliability models, life testing, failure analysis, and
maintainability. Prerequisite: IE 3320.
4340 Optimization Techniques. (3-0) Mathematical modeling and
computational methods for linear, integer, and nonlinear
programming problems. Prerequisite: IE 3340.
4350 Supply-Chain Engineering. (3-0) The analysis of supply chain
problems to include facility location, customer assignment,
vehicle routing, inventory management, and the role of
information and decision support systems in supply chains.
Prerequisite: IE 3340.
4355 Facilities Planning. (3-0) Planning, design, and analysis of facilities. Emphasizes the principles and methods used for solving
plant layout, facility location, material handling, automation,
computer integration, and warehouse operations.
4360 Human Factors Design. (3-1) This course will emphasize the
applications of human factors engineering to systems design.
Prerequisites: IE 3360. (WI)
4370 Probabilistic Operations Research. (3-0) Probabilistic
models in operations research to include queuing theory,
simulation, and Markov chains. Emphasis will be placed on
modeling applications to solve problems in industry and
computing. Prerequisite(s): IE 3320 and CS 1428.
4380 Industrial Safety. (3-0) This course is a survey of occupational safety and hazards control. Topics include the history
of occupational safety; hazard sources related to humans,
environment, and machines; and engineering management
of hazards.
4390 Industrial Engineering Capstone Design. (3-2) Students
form teams and apply industrial engineering principles to
develop and implement solutions to industrial problems
and/or systems engineering issues. Includes incorporation of
engineering standards and realistic constraints. Prerequisite:
IE3310, IE 3330 and at least two of: IE 4355, IE 3360,
MFGE 4396, and IE 4310. Co-requisite: At least two
courses from: IE 4320, IE 4350, and IE 4360.
4399 Special Topics in Industrial Engineering. (3-0) This course
338 Texas State University-San Marcos
will cover advanced topics that cannot be fitted into a
regular course in the curriculum. Prerequisite: Faculty advisor
approval.
4399A Six Sigma Methodologies. (3-0)
4399B Human Computer Interaction. (3-0)
4399C Engineering Statistics II. (3-1) This course is the continuation of IE 3320 Engineering Statistics I and covers simple
and multiple regression analysis, analysis of variance, 2^k
Factorial Experiments, and the use of statistical packages.
Prerequisite: IE 3320.
4399D Modern Heuristic Optimization Techniques. (3-0)
Heuristic methods that search beyond local optima such
as simulated annealing, tabu search, genetic algorithms,
ant-colony systems, and particl swarm. Papers from the literature, problem-specific heuristics, evaluation methods and
serial/parallel implementations are discussed. This course is
an advanced undergraduate course for students in engineering and related fields. Prerequisites: IE 3340, CS 1428.
Courses in Manufacturing Engineering (MFGE)
2132 Manufacturing Processes Lab. (0-2) Hands-on experience in
variety of material removal processes such as turning, milling, drilling, and CNC machining; joining processes such as
gas/arc welding, and soldering; metal casting, polymer and
composite processing, and microelectronics manufacturing.
Corequisite: ENGR 2300.
2332 Material Selection and Manufacturing Processes. (3-1)
Overview of material processing, material selection and process parameter determination. Processes covered include:
material removal, forming, casting, polymer processing,
semiconductor manufacturing and assembly processes.
Laboratory activities provide opportunities for applying the
design through manufacture activities of the product cycle.
Corequisite: ENGR 2300.
3316 Computer Aided Design and Manufacturing. (3-1) Topics
include design process, description of wireframe/surface/
solid models, transformation and manipulation of objects,
finite element analysis, data exchange, process planning,
machine elements, fundamentals of numerical control programming for turning and milling processes, fundamentals
of CAD/CAM systems, CNC code generation by CAD/
CAM software, waterjet, and plasma cutting. Prerequisites:
ENGR 1313 and MFGE 2332.
4355 Design of Machine Elements. (3-0) This course will cover the
general procedures in designing various machine elements.
These elements include shafts and flexible elements, springs,
welded/riveted/brazed joints, screw fasteners, rolling/sliding
contact bearings, gears, cams, and followers. Emphasis will
be placed on using standard design practices. Prerequisite:
ENGR 3311 or TECH 2351.
4357 Dynamics of Machinery. (3-0) This course will cover kinematics and kinetics of particles; kinematics and kinetics of rigid
bodies in two and three dimensions; application of dynamics
to the analysis and design of machine and mechanical components; mechanical vibrations; linkages; gear trains; and
balancing of machines. Prerequisites: MATH 3323 and 3375.
4363 Concurrent Process Engineering. (2-3) Integrated design
and development of products and processes; impact of ethical issues on design; the discussion of real-world engineering
problems and emerging engineering issues with practicing
engineers; preparation of reports; plans or specifications;
cost estimation; project management, communication
and the fabrication of an engineered product/system.
Prerequisites: ENGR 3311, MFGE 4365, and senior standing. (WI)
4365 Tool Design. (3-1) Design of single and multi-point cutting
tools, jig and fixture design, gage design, and the design of
tooling for polymer processing and sheet metal fabrication.
Laboratory projects will involve the use of computer aided
design and rapid prototyping. Prerequisites: MFGE 3316 or
ENGR 3316 or TECH 2310.
4367 Polymer Properties and Processing. (3-1) Structure, physical
& mechanical properties, design considerations and processing methods for polymer-based materials are presented.
Processing methods include: injection molding, blow
molding, thermoforming, compression molding, extrusion,
filament winding, lay-up methods, vacuum bag molding and
poltrusion. Prerequisite: MFGE 2332 or TECH 4362.
4376 Control Systems and Instrumentation. (3-0) The theory of
automated control systems and its applications to manufacturing systems are covered in this course. Topics covered
include: modeling of systems, time and frequency domain
feedback control systems, stability analysis, transducer and
sensor technology and digital control. Prerequisites: PHYS
1430 and one of the following: MFGE 2332, TECH 4362,
or EE 3370. Co-requisite: MATH 3323.
4392 Microelectronics Manufacturing I. (3-3) Provides an overview of integrated circuit fabrication including crystal
growth, wafer preparation, epitaxial growth, oxidation, diffusion, ion-implantation, thin film deposition, lithography,
etching, device and circuit formation, packaging and testing.
The laboratory component involves production and testing
of a functional semiconductor device. Prerequisites: CHEM
1141 and CHEM 1341.
4394 Microelectronics Manufacturing II. (3-3) Topics include:
atomic models for diffusion, oxidation and ion implantation; topics related to thin film processes i.e. CVD, PVD;
planarization by chemical-mechanical polishing and rapid
thermal processing; and process integration for bipolar and
MOS device fabrication. Students will design processes and
model them using a simulation. Prerequisite: MFGE 4392.
4395 Computer Integrated Manufacturing. (3-1) An overview
of computer integrated manufacturing is presented. Topics
include control strategies for manufacturing systems, automated material handling systems, production planning, shop
floor control, manufacturing execution systems, manufacturing databases and their integration, data communication
and protocols and man/machine interfaces. Prerequisite:
MFGE 3316 or ENGR 3316 or TECH 4375. (WI)
4396 Manufacturing Systems Design. (3-2) Applications of simulation modeling to the design and analysis of manufacturing
systems are presented in this course. Topics covered include
queuing theory and discrete event simulation methods.
Design projects will involve the use of current simulation
language for modeling and analysis of manufacturing systems. Prerequisites: IE 3320. (WI)
4399 Special Topics in Manufacturing Engineering. (3-0) This
course will cover advanced topics that cannot be fitted into
a regular course in the curriculum. Prerequisite: Faculty
advisor approval.
4395 Computer Integrated Manufacturing. (3-1) Presented in
this course is an overview of computer integrated manufacturing. Topics include control strategies for manufacturing
systems, automated material handling systems, production
planning, shop floor control, manufacturing execution
systems, manufacturing databases and their integration,
data communication and protocols and man/machine
interfaces. Prerequisite: MFGE 3316. (WI)
4396 Manufacturing Systems Design. (3-2) Applications of
simulation modeling to the design and analysis of manufacturing systems are presented in this course. Topics covered include queuing theory and discrete event simulation
methods. Design projects will involve the use of current
simulation language for modeling and analysis of manufacturing systems. Prerequisites: IE 3320. (WI)
4399A Reverse Engineering and Rapid Prototyping. (3-0) In this
course 3D scanning technology for design, analysis, and
inspection, is covered. Also, applications of the 3D scanning in reverse engineering and different rapid prototyping
processes in a hands-on approach will be explained in this
course. Prerequisite: MFGE 3316.
4399B Introduction to Reinforced Polymer Nanocomposites
in Industrial Applications. (3-0) Introductory course in
reinforced polymer nanocomposites focusing on materials,
manufacturing, characterization, and applications. Include,
primarily nanoclay polymer matrix composites. Thrust will
be the challenges in low-cost manufacturing for industrial
applications, commercial successes, its impact on current
material market, and future. Prerequisite: ENGR 2300.
4399C Introduction to Industrial Robotics. (3-1) This course
will cover the basic principles and techniques involved in
industrial robotics. Emphasis will be placed on industrial
robot applications, analysis of robot manipulators, components of industrial robots, robot programming and control.
Prerequisites: MATH 3377, MFGE 4376, and PHYS 1430.
2012-2014 Undergraduate Catalog 339
Download