TENDER DOCUMENT
(State Grant: 2015-16)
Tender Notice No: JGEC/DEPT NAME OR SECTION/SG/1184/2015-16 dated 08.09.2015
JALPAIGURI GOVERNMENT ENGINEERING COLLEGE
JALPAIGURI- 735 102
www.jgec.org
Phone: 03561 – 255131 (Principal), Fax: 03561 – 256143
255132 (Accounts Officer), 255465 (EPABX)
OFFICE OF THE PRINCIPAL
JALPAIGURI GOVERNMENT ENGINEERING COLLEGE
JALPAIGURI – 735 102
www.jgec.org
1
Tender Notice No: JGEC/DEPT NAME OR SECTION/SG/1184/2015-16
dated 08.09.2015
INFORMATION TO THE TENDERERS
Sealed tenders are invited from bonafide and experienced firms/agencies for purchase of various equipments / materials and maintenance work for
different academic/ non-academic departments /sections .
1. Collection of Tender Document: Tender document is to be downloaded from the collegiate website: www.jgec.org on and from 08-09-2015. Cost of
tender paper is Rs.200/- for each Department/Section to be submitted by Demand Draft for each Department/Section separately payable at Jalpaiguri
drawn in favour of “Principal, Jalpaiguri Govt. Engineering College.”
2. Submission of the Tender: To be deposited in “TENDER BOX” kept in the chamber of the P.A to Principal, Jalpaiguri Govt. Engg. College.
BID SHOULD BE SUBMITTED SEPARATELY FOR EACH DEPARTMENT/ SECTION in separate Envelopes
MENTIONING THE NAME OF THE DEPARTMENT / SECTION ON THE BIGGER ENVELOPE. THE COST
OF TENDER DOCUMENT (RS. 200) AND BID SECURITY (RS. 2000) ARE TO BE SUBMITTED FOR EACH
DEPARTMENT / SECTION ALONG WITH THE BID OF THE RESPECTIVE DEPARTMENT/SECTION.
3. Date & time of receipt/submission of Tender:
From 09-09-2015 to 19-09-2015 (upto 12:30 P.M.)
4. Date and Time for Recording and opening of Bids:
Received Bids will be opened in presence of bidders who submitted their bids or their authorized representatives
Venue: - Collegiate Conference Room
Date: 21.09.2015, Time: 12:00 noon.
5. Due to Strike or other unavoidable circumstances, Bids will be opened on the next working day at same time and venue.
6. Preparation of Bid:
Bid should contain the following and all the pages of the submitted documents must be signed by authorized Signatory and to be duly stamped. In
absence of any mentioned items/parts the bid is liable to be cancelled without further process.
2
1. Commercial Documents :
Bid must contain the followings:
(a) A letter in favour of the Principal written in the Letter head of the Bidder and duly signed by the Authorized signatory, mentioning the following:
(i)
(ii)
Demand draft of Rs. 200/- for each Department/Section bearing no……date……..(Cost of Tender
Bank_____________
Demand draft of Rs. 2000/- for each Department/Section bearing no……date……..(Bid Security) Bank___________
Paper)
(b) The Demand Draft of Rs.200/- for each Department/Section payable at Jalpaiguri drawn in favour of “Principal, Jalpaiguri Govt. Engineering
College” as cost of the Bid Document and to be submitted along with the Bid of the respective Departments/Sections.
(c) The Demand Draft of Rs.2000/- for each Department/Section payable at Jalpaiguri drawn in favour of “Principal, Jalpaiguri Govt. Engineering
College” as cost of the Bid Security and to be submitted along with the Bid of the respective Departments/Sections.
(d) Copy of the up-to date valid Trade License
(e) Copy of the up-to date valid Professional Tax Clearance
(f) Copy of the up-to date valid VAT/ Sales Tax Clearance
(g) Copy of the up-to date valid Income Tax Clearance
(h) Consult the checklist for other documents, if any
2. TECHNICAL Documents:
Technical documents must contain the following: For each of the Item for which bidder is
willing to quote.
(a) Name of Item
(b) Make and model no.
(c) Detailed Technical Specification
(d) Relevant Technical Literature
(e) Specify whether the quoted model conforms the Technical specifications of Item(s) as mentioned in our Bid Document.
(f) Comprehensive on-site Warranty for at least one year or as specified.
(g) If the bidder is not the maker of the item, Proper Authorized Dealership certificate
(h) Bidder’s relevant credentials.
(i) Consult the checklist for other documents, if any
3. Financial part:
3
Financial Part for the Bid Document for which bidder is willing to quote, has to be submitted
in a Separate page.
FORMAT OF FINANCIAL PART:
(To be printed in the Letterhead of the Bidder)
Tender Notice No: JGEC/DEPT NAME OR SECTION/SG/1184/2015-16
Name of the Department/Section:_____________________
Prices are inclusive of all
charges and FOR JGEC.
We agree to supply the
with
the
technical
mentioned in the above table
the Tender Notice.
Item
No.
Description of
Goods
Quoted Unit
Rate in Rs.
Quantity
dated 08.09.2015
Total Amount of Price
In Figures
In Words
taxes, duties and
other
above goods in accordance
specifications for the price as
within the period specified in
We also confirm that the normal commercial warrantee / guarantee of...........months shall apply to the offered goods.
Signature of Tenderer( Authorized signatory)
(with seal and date)
4. All the documents (Commercial, Technical, Financial parts) have to submitted putting in a bigger envelope and it should be marked as .
Bid for Tender Notice No: JGEC/DEPT NAME OR
SECTION/SG/1184/2015-16
dated 08.09.2015
To
The Principal,
Jalpaiguri Govt. Engineering College,
Jalpaiguri, West Bengal – 735102
5. Amendments, if any, context to emergent need, tenderers are advised to watch collegiate website www.jgec.org and which may not be
notified through print-media.
6. All duties, upto date taxes and other levies payable by the tenderer under the work order shall be included in the total price and each
supplier/tenderer shall submit only one ‘Tender/Quotation’ for one Deptt./Section only.
4
The rates quoted by the tenderer shall be fixed for the duration of the validity period
of the tender and shall not be subject to adjustment on any account. Form –D will be
supplied, if required.
The Prices should be quoted in Indian Rupees only. Correction, if any, shall be made by crossing out initialing with date after rewriting.
Prices quoted should invariably be FOR, Jalpaiguri Govt. Engineering College, Jalpaiguri.
7. Performance Security: Each successful tenderer has to deposit a performance security of two (2%) of the tender value. However, said
deposit will be refunded after the successful completion of the warranty period. In case of tenderer’s subsequent withdrawal after the
acceptance of “work order” or do not extend service during warranty period, the said amount will be forfeited.
8. Evaluation of Quotations:
The Purchaser will evaluate, examine and compare the quotations to determine the substantially responsiveness. Evaluation will be done
ITEMWISE.
9.
Each page of the bid alongwith the submitted documents should be Properly signed and stamped.
10. Issue of Purchase/Work Order: The Purchaser will award appropriate order to the Supplier whose quotation holds to be substantially
responsive and who has offered the lowest evaluated quotation price.
a) Notwithstanding the above, the Purchaser reserves the right to accept or reject any quotations and to cancel the tendering process and
reject all quotations at any time prior to the issue of the work order without assigning any reason, whatsoever.
b) In case of need, training facility is required to be provided by the supplier for any special type of equipment. Necessary electrical and
mechanical work related to installation and commissioning is required to be done by supplier.
c) Formal communication to the successful tenderer to be made as to the award of contract by the Purchaser prior to expiration of the
quotation validity period. The terms of the accepted offer shall be incorporated in the purchase order.
11. Validity of Quotation: For 6 (Six) months effectively from the date of opening of the acknowledged sealed Tenders.
12. Bidders must fill up the check list as supplied here and to be submitted with the documents. Due to absence of Checklist or Incomplete
Checklist, the bid may be cancelled without any consideration
N.B: (1) Any subsequent amendments/modifications etc. on this matter will be notified in the institute website only which may be referred by the
interested bidders continuously.
5
(2) Further queries please contact 9434608422.
CHECK LIST for State Grant : 2015-16
Advt. No. - _________________________
Bid Reference No. _________________________
Attached Draft No. and Amount:____________________ Dated:________________________
Name of the Department / Section:
Sl. No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Description of Criteria
Whether signed in all pages
Whether name of Manufacturer is mentioned for each of quoted items
Whether bidder is a Manufacturer/Authorized Agent for each of quoted items.
Whether Proof of Manufacturer is enclosed for each of quoted items.
Whether Model No is mentioned for each of quoted items.
Whether the printed original Literature is enclosed for each of quoted items.
Whether Bid validity is mentioned.
Whether Delivery Period is mentioned.
Whether agreed to purchaser’s Mode of payment.
Whether FOR, JGEC
Whether inclusive of all taxes.
Whether inclusive of Installation, P & F Charges. Installation Certificate has to be provided along with Bill. If
applicable, calibration certificate has to be provided with the equipments.
Whether Credentials are enclosed. Credentials are to be in the form of Challan, Purchase order copy and
certificate from buyer.
Whether valid Letter of Authorization for authorized agent/ distributorship from manufacturer for each of quoted
items is attached.
Whether Warranty is given for the specified period. If order is given, Warranty Certificate has to be delivered
with the Bill.
Whether warranty is given by manufacturer for each of quoted items.
Whether recent ST/VAT clearance Certificate is enclosed.
Whether recent Professional Tax Clearance Certificate is attached.
Whether copy of Trade License is attached.
Whether Certificate of manufacturer in the form of ISO9001 and/or Excise Registration is attached.
Whether recent IT Clearance Certificate/ recent IT Return is attached.
6
COMPLIANCE: (Yes/No)
22.
Whether details of nearest Service Center and its address is enclosed (to be mentioned for each item)
23.
Whether Format of Quotation is as per the format given above
______________________________
Signature of the Supplier
Date:__________________________
NB: Due to Incomplete Checklist and discrepancies between check list and submitted document, the bid will be declared cancelled without
further proceedings.
INVITATION FOR QUOTATIONS FOR SUPPLY OF
GOODS UNDER STATE PLAN 2015 – 2016
CIVIL ENGINEERING DEPARTMENT
REPAIR AND MAINTENANCE WORK OF EQUIPMENTS FOR CIVIL ENGINEERING DEPARTMENT
Sl No
CER – 01
CER – 02
CER – 03
CER – 04
CER – 05
CER – 06
CER – 07
Name and Description of Equipments
Universal Testing Machine (Capacity 1000 KN)
Repairing Work
a) Servicing / repairing including
spare parts
b) Calibration
Marshall Stability testing machine (Capacity 50 KN)
a) Servicing / repairing including
spare parts
b) Calibration
Compression Testing Machine (200 Ton capacity)
a) Servicing / repairing including
spare parts
b) Calibration
Digital Compression testing machine with multi-function a) Servicing / repairing including
display (Make: AIMIL LTD) (2000KN Capacity)
spare parts
b) Calibration
Direct Shear Testing Machine (Make: AIMIL LTD)
a) Servicing / repairing including
(2KN Capacity)
spare parts
b) Calibration
Unconfined Compression Testing Machine
a) Servicing / repairing including
(2KN Capacity)
spare parts
b) Calibration
CBR Testing Machine
a) Servicing / repairing including
7
Remarks
Quotation may be given separately
for item (a) and (b) after physical
inspection
Quotation may be given separately
for item (a) and (b) after physical
inspection
Quotation may be given separately
for item (a) and (b) after physical
inspection.
Quotation may be given separately
for item (a) and (b) after physical
inspection
Quotation may be given separately
for item (a) and (b) after physical
inspection
Quotation may be given separately
for item (a) and (b) after physical
inspection
Quotation may be given separately
(Capacity 5KN )
spare parts
b) Calibration
Servicing / repairing including
spare parts
(Motor is not working)
Servicing / repairing including
spare parts
(Motor is not working)
Servicing / repairing including
spare parts
for item (a) and (b) after physical
inspection
CER – 08
Ductility Testing Machine for Bitumen (Make: AIMIL LTD)
CER – 9
Los Angeles Abrasion Testing machine (Make: AIMIL LTD)
CER – 10
Ultrasonic Testing Machine
CER – 11
Universal Automatic Compactor
Servicing / repairing including
spare parts
Quotation may be given after
physical inspection
CER – 12
V-Notch
Quotation may be given separately
for item (a) and (b) after physical
inspection
CER – 13
Tri-axial Testing Machine
(Proving Ring No – 0133, Load Range-2.5KN)
CER – 14
Ultrapure Water System (Model: Arium 611 DI Make:
Sartorius)
CER-15
Digital balance (Model: CP225D, Make: Sartorius)
a) Servicing / repairing including
spare parts
b) Calibration
a) Servicing / repairing including
spare parts
b) Calibration
Servicing / repairing including
spare parts
(Sanitization of Ultrapure Water
System)
Servicing / repairing including
spare parts
CER-16
Muffle furnace (Temperature limit 1000o C)
CER-17
CER-18
Servicing / repairing including
spare parts
(Temperature is not raised )
Atomic Absorption Spectrometer (Model: WFX-120B, Make Servicing / repairing including
:Rayleigh
spare parts
(Flame is not ignited)
Digital pH meter (Model: PB-11, Make: Sartorius)
Servicing / repairing including
spare parts
(Probe is not working)
8
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given separately
for item (a) and (b) after physical
inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
CER-19
Refrigerator, (Model: LFC 110U, Make: Daihan Labtech)
CER-20
Jar Test Apparatus
CER-21
U-tube manometer
CER-22
Servicing / repairing including
spare parts
(Temperature
is
not
being
controlled)
Servicing / repairing including
spare parts
(Motor is not working)
Servicing / repairing including
spare parts
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
CER-23
Under ground foot valves 8 inch diameter
Servicing / repairing including
spare parts
and painting
Servicing / repairing
CER-24
Valves of pipe network [ 8” (3 no.), 6” (3 no.) and 4” (1 no.))
Servicing / repairing
Leak proofing of fumes
Sl No
CER-25
CER-26
CER – 27
UPS
Name and Description of Equipments
Repairing Work
Repairing including spare parts
Printer
Projector
Repairing including spare parts
Repairing including spare parts
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Quotation may be given after
physical inspection
Remarks
Quotation may be given after
physical inspection
-do-do-
PURCHASE OF EQUIPMENTS FOR CIVIL ENGINEERING DEPARTMENT
SL NO
CE – 1
NAME OF THE EQUIPMENT
1000 ml measuring cylinder
CE – 2
500 ml measuring cylinder
CE –3
200 ml measuring cylinder
SPECIFICATIONS OF THE EQUIPMENT
Graduated single Metric Scale, with Pour Out, with Hexagonal Base; Made of borosilicate glass
having good thermal resistance, chemical resistance and mechanical strength; Class A accuracy as
per appropriate I.S. Code
Graduated single Metric Scale, with Pour Out, with Hexagonal Base; ; Made of borosilicate glass
having good thermal resistance, chemical resistance and mechanical strength;Class A accuracy as
per appropriate I.S. Code.
Graduated single Metric Scale, with Pour Out, with Hexagonal Base; Made of borosilicate glass
having good thermal resistance, chemical resistance and mechanical strength; having good thermal
resistance and mechanical strength; Class A accuracy as per appropriate I.S. Code [IS : 4031 ,(Part 6
9
CE – 4
CE – 5
CE – 6
CE – 7
CE – 8
CE – 9
CE – 10
CE – 11
CE – 12
CE-13
)]
Graduated single Metric Scale, with Pour Out, with Hexagonal Base; Made of borosilicate glass
having good thermal resistance, chemical resistance and mechanical strength; Class A accuracy as
per appropriate I.S. Code.
(i) 250 ml Volumetric flask
As per relevant IS Code of Practice. To be used to determine specific gravity of fine aggregates.
(ii) 500 ml Volumetric flask
Volumetric flask with uniform neck-tube and Stopper; Made of borosilicate glass having good
thermal resistance, chemical resistance and mechanical strength;
Le Chatelier Flask for specific gravity As per IS: 4031; To be used to determine specific gravity of cement. Made of borosilicate glass
test of cement
having good thermal resistance, chemical resistance and mechanical strength; Class A accuracy as
per appropriate I.S. Code
1000 ml Beaker
With spout, Graduated; Made of borosilicate glass having good thermal resistance, chemical
resistance and mechanical strength;
500 ml Beaker
With spout, Graduated; Made of borosilicate glass having good thermal resistance, chemical
resistance and mechanical strength;
Electronic Digital Balance – 1
Electronic digital balance with all accessories.
Capacity: Not less than 20000 gm.
Readability: 1gm.
Pan Size (cm): Not less than 40cmx3ocm
Response Time (s): Not greater than 2sec
Repeatability: 0.5gm.
Calibration Weight: 10000 gm.
Electronic Digital Balance – 2
Electronic digital balance with all accessories.
Capacity: Not less than 5000 gm.
Readability: 0.01gm.
Pan Size (cm): Not less than 25cm diameter
Response Time (s): Not greater than 2sec
Repeatability: 0.01gm.
Calibration Weight: 5000 gm.
Electronic Digital Balance – 3
Electronic digital balance with all accessories.
Capacity: Not less than 1000 gm.
Readability: 0.001gm.
Pan Size (cm): Not less than 25cm diameter
Response Time (s): Not greater than 2sec
Repeatability: 0.001gm.
Calibration Weight: 1000 gm.
Pipette: (i) 1ml, (ii) 2ml
As per relevant IS Code of Practice. Made of borosilicate glass having good thermal resistance,
chemical resistance and mechanical strength; Class A accuracy as per appropriate I.S. Code
100 ml measuring cylinder
Aggregate impact value testing machine
Testing machine and test procedure as per IS: 2386 Part IV-1963. A Heavy circular base with two
vertical guides fitted with a cross bar at the top. Hammer falling form 380+/-mm fitted with
10
automatic blow counter. The unit shall comprise of Impact testing machine conforming to IS: 2386
(Part IV)- 1963,IS Sieves of sizes – 12.5mm, 10mm and 2.36mm, A cylindrical metal measure of
75mm dia. And 50mm depth, A tamping rod of 10mm circular cross section and 230mm length,
rounded at one end.
CE-14
Standard penetration test accessories
As per IS 2131, IS 9640
(i) Split spoon sampler with liner
(ii) Drive pipe assembly with two end caps to give a fall of 75 cm
(iii) Drill rod 1.5 meters long x 8 nos. and drill rod 1 meter long x 8 numbers. The drill rod shall
have stiffness equal to A-rod outer diameter 41.3 mm.
(iv) Coupling for split spoon sampler and Coupling for 38 mm diameter undisturbed soil sampler.
CE-15
Humidity Chamber
Temp range from 10° C to 60° C controlled by dual display microprocessor based digital
temperature controller with +/- 0.5° accuracy.
Humidity range from atmospheric humidity to 95 % controlled by dual display Microprocessor
based digital temperature Controller with ± 3 % RH.
Automatic electronic controller with digital display of Temperature and Humidity.
Inner water tank made of stainless steel with ball cock valve
Front door has a full view glass observation window.
Size: 200 liters to 350 liters.
CE-16
Over Head LCD Projector
CE-17
Laser Printer (Type-1)
3200 Ansi Lumens Brightness, 7200 hrs lamp life in Eco mode, Contrast ratio 3000:1,1024 x768
pixels XGA Resolution

Make : SONY/ EPSON /CANON
Function: Print (black & white), copy(black & white), and scan(black & white and colour); 12 ppm
Monochrome True 600 x\600 dpi resolution (2400x600 dpi equivalent
with Automatic Image Refinement Technology); Standard 32 M B Memory; Paper size- A4,
Executive, Envelope, Windows XP/7/8 operating system supported, USB 2.0 High Speed supported.
Paper handling 150 sheets paper input, paper output – 100 sheets.
Scan resolution: 1200dpi size: Min.:A4
Copy speed (normal): 12 cpm
Copy reduce / enlarge settings: 25 to 400%
Make: CANON/HP.
Warranty – 2 years.
11
CE-18
Laser Printer (type-2)
CE-19
Thermometer (6 no.)
CE-20
Cube Mould 150mm for Cement concrete
cubes
CE-21
Cube Mould 50 sq. cm face area
(70.6mm cube) for Cement mortar cubes
CE-22
Poking Rod for compacting Cement
mortar cubes
CE-23
Beam Mould for Cement concrete beams
(150mm x150 mm x700 mm)
12 ppm Monochrome True 600 x\600 dpi resolution (2400x600 dpi equivalent
with Automatic Image Refinement Technology)
Standard 2 M B Memory on-board Paper size- A4, Executive, Envelope, Windows XP/7/8 operating
system supported, USB 2.0 High Speed supported. First Print out time. Less than 10 secs, 150 sheets
paper input, paper output – 100 sheets.
Make: CANON/HP.
Warranty – 2 years.
Temperature range: 0° to 250 °C. As per relevant IS Code of Practice. Made of borosilicate glass
having good thermal resistance, chemical resistance and mechanical strength; Class A accuracy as
per appropriate I.S. Code
Cube Mould 150mm for Cement concrete cubes made of steel as per IS 516 and IS: 10080 with all
accessories. Internal size: 150mm x150mm x150mm, tolerance ± 0.2mm. The angle between
adjacent internal faces and between internal faces and top and bottom planes shall be (90 ±0.5)
degree. The interior faces of the mould shall be plane surfaces with a permissible variation of 0.03
mm. Parts (wall plates) of the mould and the base plate when assembled shall be positively and
rigidly held together and leakage free. Parts (wall plates) of the mould and the base plate shall be
stout enough to prevent distortions. Thickness of wall plates and base plates not less than 10 mm
Cube Mould 50 sq. cm face area (70.6mm cube) for Cement mortar cubes made of steel as per IS
516 and IS:10080 with all accessories. Internal size: 70.6mm x70.6 mm x70.6mm the tolerance faces
is maintained between at +0.15 or- 0.1mm. The angle between adjacent internal faces and between
internal faces and top and bottom planes shall be (90 ±0.5) degree. The interior faces of the mould
shall be plane surfaces with a permissible variation of 0.03 mm. Parts (wall plates) of the mould and
the base plate when assembled shall be positively and rigidly held together and leakage free. Parts
(wall plates) of the mould and the base plate shall be stout enough to prevent distortions. Thickness
of wall plates and base plates not less than 10mm.
The Poking Rod [as per IS: 516] shall be made of non-absorptive, non-abrasive, non-brittle material
such as rubber compound having shore A durometer hardness of 80 ± 10.
The poking rod shall be 175 mm long and shall have cross section of 12mm x 25 mm with a tamping
face in the form of a blunt torpedo 12mm x 25mm x 25 mm. All corners rounded to 3mm radius.
Beam Mould for Cement concrete beams made of steel as per IS 516 and IS: 10080 with all
accessories. Cross-section Internal size: (150± 0.2) mm x(150± 0.2) mm. Length: 700mm The angle
between adjacent internal faces and between internal faces and top and bottom planes shall be (90
±0.50) degree. The interior faces of the mould shall be plane surfaces with a permissible variation of
0.02 mm in 150 mm and 0.1mm overall. Each mould shall be provided with a base plate and two
loose top plates of 40mm x 6 mm cross section and 50mm longer than the width of the mould. The
base plate and top plates shall have plane surfaces with a permissible variation of 0.05 mm. Parts
(wall plates) of the mould and the base plate when assembled shall be positively and rigidly held
together and leakage free. Parts (wall plates) of the mould and the base plate shall be stout enough to
prevent distortions/spreading/warping. Thickness of base plates not less than 15mm. Thickness of
wall plates not less than 15mm or (not less than 12mm and reinforced suitably by diagonal ribs on
outside faces)
12
CE-24
CE-25
CE-26
CE-27
CE-28
CE-29
CE-30
Le Chatelier Aparatus for Soundness All features should be as per IS: 269 & 4031 Mould :: 21 (P-IX) It should consists of a small split
Testing of Cement
cylinder made of spring brass of 0.5mm thickness forming a mould 30mm internal diameter and
30mm high; split being 0.5mm maximum. On either side of the split cylinder, two parallel indicating
arms with pointed ends are attached and the distance from the pointed ends to the centre of the
cylinder being 165mm Supplied complete with two glass plates and lead weight (100±10) gms.
Vicat Apparatus
All features should be as per IS 5513: 1996 and IS: 4031 Frame: Made of Cast iron with smooth
surface and with a hydraulic dash pot arrangement for a jerk free lowering of the needle on the test
specimen
Movable rod with cap: Made of Brass with smooth surface
Vicat Mould: Made of brass; An internal diameter of 70±5 mm at the top, 80±5 mm at the bottom
and a height 40±0.2 mm. A minimum wall thickness of 4 mm. A plate of glass of at least 2.5 mm
thickness
Plunger: Polished brass dia.-10±0.05 mm with a projection at the fitting end for insertion in to the
movable rod. The lower edge shall be flat. Length: 50 ±1 mm.
Initial setting time Needle: Circular initial setting time Needle of cross section 1 mm sq. x 50 mm
long with necessary fitting end for insertion in to the movable rod.
Final setting time Needle with brass collar at one end as per IS: 4031 and with necessary fitting
end for insertion in to the movable rod.
Blaine air permeability apparatus to All features should be as per IS 5515 and IS: 4031 (PART-2)
determine fineness of cement
300mm diameter I. S. Sieves
300mm diameter I. S. Sieves made of G. I. frame with square punched steel mesh Apertures: 45mm,
37.5mm, 19mm, 9.5mm
200mm diameter I. S. Sieves
200 mm diameter I. S. Sieves made of brass frame with stainless steel mesh. 4.75mm, 3.35mm, 2.8
mm, 2.36mm, 1.18mm,
200mm diameter I. S. Sieves
200 mm diameter I. S. Sieves made of brass frame with stainless steel mesh. 850 micron, 710
micron, 600 micron, 425 micron, 355 micron, 300 micron, 180 micron, 150 micron, 90 micron, 75
micron
Steel Almirah
Size: 78” x 36”x 20”; made of white steel sheets of gauge thickness 20; no. of shelves 5; steel colour.
Principal
Jalpaiguri Govt. Engineering College
Jalpaiguri – 735102, West Bengal
Professor and Head
Civil Engineering Department
Jalpaiguri Govt. Engineering College
Jalpaiguri – 735102, West Bengal
13
INVITATION FOR QUOTATIONS FOR SUPPLY OF
GOODS UNDER STATE PLAN 2015 – 16
To
___________________________________
___________________________________
___________________________________
___________________________________
Dear Sir,
Subject: Invitation for quotations for supply of equipments / goods of Mechanical
Engineering Department under State Plan 2015-16
You are invited to submit your most competitive quotation for the following goods:
Sl.
No.
1.
Brief
Description of
Goods
L.C.D ProjectorType 1
Specification
2.
L.C.D ProjectorType 2
3.
Cartridge
3700 lumens 3LCD Projector
3000:1contrast ratio
Native WXGA (1280 X 800)Resolution
Up to expected 7000 h lamp life
1.6x optical Zoom
16W Speaker Dersatire input including
HDMI , 2xRGB, Mic input
USB image viewer function
RJ 45 for network control and
monitoring wireless image transfer
wireless tablet connection
Equipped with Bright Era 3LCD Panel
Make : SONY/ EPSON /CANON
3200 Ansi Lumens Brightness, 7200 hrs
lamp life in Eco mode, Contrast ratio
3000:1,1024 x768 pixels XGA
Resolution
Make : SONY/ EPSON /CANON
LBP 2900
4.
Cartridge
HP Laser Jet 3055
14
Quantity
1 No
Delivery
Period /
Job
Duration
Place of
Delivery
Installatio
n
Requirem
ent, if any
To be
installed
and
Commiss
ioned by
the
Vendor
Within 5
weeks
from the
date of
work
order
At the
departmen
t
2 Nos
-do-
-do-
-do-
8 pcs
-do-
-do-
------
6 Pcs
Within 5
weeks from
the date of
work order
At the
departmen
t
5.
Laptop
6.
Battery for UPS
7.
Air Conditioner
8.
Speaker for
computer
9.
BOB-CAD-CAM
Software Version
25
10.
Annual
Maintenance
Contract of CNC
turning machine
11.
Repairing of CNC
Milling Trainer
(Hi-Tech made)
including
Overhauling of the
M/C with one year
warranty
Annual
Maintenance
Contract of
Laptops including
Spares
Abaqus 6.14
software
12.
13
14.
Repairing of
Vibration Exciter
& Power Oscillator
System
15.
Repairing of Eddy
Current
Core i5 (5th Generation) 4 GB RAM ,
Minimum 500 GB HDD,
2 GB Graphics Card, 15.6’’ screen
Windows 8 with Laptop Bag
Make: HP/DELL/SONY
12V 7AH Sealed Maintenance Free
Battery for 1 KVA and 600 VA Off-line
UPS.
Make: Exide/ Panasonic
3Nos
-do-
-do-
To be
installed by
the Vendor
30 Nos
-do-
At the
departmen
t
To be
installed
and tested
by the
Vendor at
the
department
1.5 TON, 3 star split AC .
Make- VOLTAS/ BLUE STAR/LG/
WHIRLPOOL
2 Channel 2.0 USB Support,
Make: Philips/ i Ball/ Logitech/ Zen/
Lenevo/ Creative.
4 NoS
-do-
-do-
-do-
8 Nos
At the
department
1 No.
Within 5
weeks from
the date of
work order
Within 5
weeks from
the date of
work order
-do-
1 No.
-do.-
At the
department
laboratory
07 Nos
-do.-
At the
department
1 No
-do.-
At the
department
-do-
At the
department
laboratory
1No
-do-
-do-
2 Nos
-do-
At the
department
1 No.
Star turn CNC turning Machine with 808
D Limens controller including
mechanical electrical of electronics
spares with periodic check-up
Dell - 4 Nos
H.P. - 1 No
Lenovo - 2 Nos
Acer - 1 No
Total – 07 Nos
Extended Teaching Edition(20 Licenses)
(one year upgrades )
Power Oscillator Model NO -29
Maximum Power Output – 250VA
Exciter Model No- 230
200 Newton Peak Force
Make: Syscon Instruments Private Ltd
Bangalore
1 No
-do-
At the
department
Dynamometer
16.
Steel Almirah
78” x 36”x 20” , gauge : 18, 5 shelfs,
withthout locker, made from white steel
15
To be
installed by
the Vendor
To be
installed by
the Vendor
To be
repaired
and tested
by the
Vendor at
the
department
-do-
sheet.
17.
Laser Printer.
18.
Repairing of LCD
Projector.
12 ppm Monochrome True 600 x\600
dpi resolution (2400x600 dpi equivalent
with Automatic Image Refinement
Technology)
Standard 2 M B Memory on-board Paper
size- A4, B5, A5, Executive, Envelope,
Windows XP/7/8 operating system
supported, USB 2.0 High Speed
supported. First Print out time. Less than
10 secs, 150 sheets paper input, paper
output – 100 sheets.
Make: CANON/HP.
Warranty – 2 years.
Make; SONY
Model: VPL- EX50.
2Nos.
3 Nos
-do-
-do-
-do-
At the
Department
Note: For Repairing and Maintenance Work (Sl. Nos 10,11, 12, 14, 15 & 18), Bidder may visit
the Department on working days from 12-30 p.m. to 2.00 p.m.
Head of the Department
Mechanical Engineering
Jalpaiguri Govt. Engineering College
Jalpaiguri
Principal
Jalpaiguri Govt. Engineering College
Jalpaiguri
16
Proposal for the year 2015-2016
Computer Science and Engineering
Jalpaiguri Government Engineering College
Sl.
No.
1.
Brief Description of
Goods
4.
5.
6.
7.
8.
Quantity
Place of
Delivery
Installation
Requirement,
if any
2
Within a
week from
the date of
work order
At the respective
department
As per enclosed
specification
1
-do-
-do-
(3 user 1 year)
5
-do-
-do-
Including
installation.
As per enclosed
specification
As per enclosed
specification
4
-do-
-do-
Including
installation.
5
-do-
-do-
2
-do-
-do-
Cartridge for HP Laser Jet
P1007
5
-do-
-do-
Cartridge for HP CM 1312mfi
4
-do-
-do-
10
-do-
-do-
2
-do-
-do-
Laptop
As per enclosed
specification
Mini Laptop
Kaspersky Internet Security
Antivirus
2
3.
Specification
Delivery
Period /
Job
Duration
IRONIL iron remover
Office table 3’ X 2’
2 ton split AC with
Installation
As per enclosed
specification
Including
installation
JetFlash 350 32GB USB Pen
9.
Drive (Black)
10.
Compressor for 2 ton
Split AC
Multinational Branded
Company
Including
installation
MAINTANANCE:
Sl.
No.
Brief Description
of Goods
Specification
1.
AMC of Computer
To be inspected in the
Quantity
60
17
Delivery
Period /
Job
Duration
-do-
Location /
Laboratory
Other
information,
if any
-do-
xx
2.
3
with Accessories
and replacement
of (Mother Board,
HD, SMPS,
RAM,DVD R/W) if
required.
Repairing of
Water Cooler
cum water
Purifier along
with replacement
of spare parts
AMC of Wall
Mounted Split AC
with gas charging,
spare parts and
accessories
department
(HCL, HP etc. )
Make: Aquaguard
Model: RO 80 PSS
1
Make: Blue Star (1.5 ton /2
ton)
6
Item wise details specification
Item No. 1: (Laptop)
Input
Pointer Device
Keyboard
Web Camera
Power
Power Supply
Battery Backup
Battery Cell
Warranty
Touchpad
Standard Keyboard
1.0 Megapixel HD Webcam
65 W AC Adapter
Upto 3 hours
6 cell
1 year
Display
Resolution
Screen Size
Screen Type
Communication
Ethernet
Bluetooth
Wireless LAN
Ports/Slots
Mic In
Multi Card Slot
VGA Port
HDMI Port
USB Port
RJ45 LAN
Storage
HDD Capacity
1366 x 768 Pixel
39.624 cm
HD LED Anti-glare Display
Gigabit LAN
v4.0
IEEE 802.11b/g/n
Yes
3-in-1 Card Reader
Yes
Yes
3 x USB 2.0
Yes
500 GB
18
-do-
-do-
Xx
RPM
Hardware Interface
Memory
Expandable Memory
System Memory
Optical Disk Drive
Optical Drive
Read/Write Speed
5400
SATA
Upto 8 GB
4 GB DDR3
DVD RW Drive
8x
Graphics
Graphic Processor
Intel HD Graphics 4000
Audio
Internal
Mic Digital Microphone
Speakers
Yes
Platform
Operating System
Windows 8
System Architecture
64 bit
OS Architecture
64 bit
In the Box
Sales Package
Laptop, Battery, AC Adapter
Processor
Brand
Intel
Chipset
B75 Express
Cache
3 MB
Variant
3230M
Clock Speed 2.6 GHz with Turbo Boost Upto 3.2 GHz
Processor Intel Core i5 (3rd Generation)
Item No. 2: (Mini Laptop)
Operating System
Windows 8.1
Processor
4th generation Intel Core i3
Display
11.6-inch 1366 x 768 pixels WLED touch Ambientlight sensor 60 Hz refresh rate
Graphics Card
Intel HD Graphics 4×00
Storage
2.5-inch HDD, SATA 3 Gbps interface
System Memory
4 GB DDR3L (1600 MHz)
Audio
Dual speakers (left and right) Waves Maxx Audio
Realtek ALC3234 controller
19
Inputs & Controls
Power button Volume control button (up & down)
Touchpad with left-click and right-click areas (1207
x 1702 dpi, 102.4 x 77.4 mm)
Chiclet keyboard
Input/Output Ports
power-adapter, HDMI, USB 3.0 with PowerShare,
USB 2.0,USB 2.0 Slots, 2-in-1 media-card reader
(SD/MMC)
Communication
Wi-Fi 802.11b/g/n or 802.11ac Bluetooth 4.0
Camera
0.92 MP camera with dual microphones Up to 1280
x 720 pixels video recording
Power
3-cell 11.4V Charging time (off): within 4 hours
65W adapter (19.5, 3.34 A) 100-240V, 50-60Hz
input
Dimensions and Weight
Width: 300 mm (11.81-inch), Weight: 1.40 kg (3.08
lbs)
Item No.4: (Iron Remover)
Dimensions (Dia) x (L)
215*305*105 mm (W*H*D)
Net weight
2.4 kgs
Recomended for
5ppm of total Iron max.
Recomended flow rate
1lpm
Recommended usage
6000 lts
Input water pressure
0.3 kg / sq.cm
Item No 5: Office Table
Size: 3’ X 2’
Plywood top Iron frame Office Table
Item No. 6:
2 TON SPLIT AC (Wall Mounted)
Wall Mounted
1
2
6200
5
Type of Split
Number of Indoor Units
Capacity(Ton)
Cooling
BEE Star Rating
Compressor
20
1
Rotary
R-22
Number of Compressors
Compressor Type
Refrigerant Gas
Performance
Energy Efficiency Ratio (EER)
Air Circulation (High)(M3/Hr)
Noise Levels (Indoor)(db)
3.51
1100 (CMH)
50
Power Requirement
1766
7.9
230 / 1 / 50
Total Power Consumption(Watts)
Running Current(Amps)
Power Supply (Volt/Phase/Hz)
General Features
Yes
Yes
Yes
Yes
Yes
Timers
Auto Restart
Sleep Mode
Remote Control
Air Swing
Dimensions (Indoor)
1185 x 253 x 340 mm
18.30
Dimensions (W x D x H)
Weight (Indoor)(Kg)
Dimensions (Outdoor)
900 x 360 x 700 mm
49
Dimensions (W x D x H)
Weight (Outdoor)(Kg)
More Features
Other Features
Anti Dust Filter, Active Carbon Filter, '- Silver Ion Filter
- LED Display
- Self Diagnosis
After Sales Service
1 Year
Warranty Period
MAINTENANCE
Item No. 1:
AMC of Computer
AMC of computers (HP, HCL etc.) with accessories and replacement of spare parts (e,g, Mother Board, RAM,
Hard Disk Drive, SMPS, DVD/CD R/W), if required.
Item No.2:
Repairing and Maintenance of Water Cooler cum Purifier
Make: Eureka Fobes
Model: Aquaguard Pure Chill RO
Repairing and Replacements of spare parts, if required, is mandatory.
21
Proposal for the State Plan of the year 2015-2016
(Under the Head “2203”)
FOR
INFORMATION TECHNOLOGY DEPARTMENT
Jalpaiguri Government Engineering College.
Digital IC Trainer
Kit
As per enclosed
specification
As per enclosed
specification
12
Delivery
Period / Job
Duration
-do-
25
-do-
-do-
-do-
Laptop Computer
As per enclosed
specification
04
-do-
-do-
4.
Online inverter
1 KVA /2 KVA
02
-do-
-do-
5.
Xerox machine
Make: Multinational
branded company
With 1hr battery
backup
As per enclosed
specification
With License
Windows8
Professional
including
installation media
kit
Including
installation
01
-do-
-do-
-do-
6.
Iron Filter and
Sediment Filter for
Online Water Cooler
cum Purifier
Online water purifier
cum cooler
As per enclosed
specification
01
-do-
-do-
-do-
As per enclosed
specification
4 / 6 /11Drawer
Office Steel File
Cabinet
Make :
Godrej/Reputed
Brand
Laminated Board
with glass and lock
facility.
v. MS Office 2010
Standard
Professional Edition
01
-do-
-do-
-do-
06
-do-
-do-
-do-
04
-do-
-do-
-do-
vii. Windows
8(Professional
01
Sl. No.
Brief Description of
Goods
1.
Digital Kit
2.
Desktop Computer
3.
7.
8.
Lateral Steel file
Cabinet
9.
11.
Notice board for
official notice
purpose
Software
Specification
Quantity
01
22
Place of
Delivery
-do-
Installation
Requirement, if
any
Including
installation.
Edition with
download rights to
windows Xppro/Win 7 pro for
100 user
viii. Kaspersky
Internet Security
Antivirus 3 user
ix. Windows 7
(Professional
Edition) Upgrade
OLP Professional
License for 100 user
xi. Oracle 11i
04
1
05
xii. Linux (version
Redhat 7)
D-link Patch Chord
3 Mtr.
10.
Patch Chord
11.
RJ-45 Cable
Make: D-Link
12.
13.
External Hard Disk
(USB Power) 1TB
Pen drive
14.
Fire Extinguisher
Multinational
Branded Company
Seagate,32 GB, with
on the go(OTG )
facility.
Dry powder type
Capacity:
5Kg
15.
Steel Almirah
***
16.
05
100
1 Roll
(100mts.)
04
05
04
-do-
-do-
Make: Reputed
Brand
Useful
for official purposes
06
-do-
-do-
Almirah
***
Make & model
:Godrej Interio
model: tambour door
units
05
-do-
-do-
17.
Office Table
***
04
-do-
-do-
18.
Office Table and
chair Executive series
***
Office Chair
Make : Godrej /
equivalent
Iron frame with
drawers ,wooden
cover
Model: Unitized
Table
T104/T102/T9/T31
L×W×H
=4ft×2.5ft×2.5ft
Make: Godrej Interio
‘Arrive’ Model. Or
equivalent.
Make:Godrej/equival
02
-do-
-do-
06
-do-
-do-
19.
23
-do-
Including
installation
***
20.
Office Table and
chair Executive series
***
21.
Laboratory chair
22.
BookCase for library
***
23.
DDR – 3 RAM 2GB
Internal HDD 250
GB
24.
25.
Mother Board for
Desktop Computer
26.
HP Laserjet Toner
88A
HP Laserjet Toner
12A
USB to IDE/SATA
ADAPTER
27.
28.
29.
30.
External Hard Disk
Case Adapter
Integrated Chip
ent
Model :
PCH7112R/7003/710
1
Make: Godrej Interio
Model:Trident
Senior/Trident
Middle/Mayfair/Fine
sse
/make:equivalent.
Should be Suitable
for use with
computer ,table,not
revolving, not height
adjustable.
. Overall height of
the chair – 95 to 105
cm
Minimum of 4
doors,Steel body
with glass and lock
system.
Make:Godrej/Repute
d Brand
Make : Starlite
Make: Samsung/
Segate/ Western
Digital
Make : Reputed
Brand Mother
Board for Core2Duo
Processor
Make : HP / Desmat
06
-do-
-do-
Including
installation
100
-do-
-do-
-do-
02
-do-
-do-
20
10
-do-do-
-do-do-
10
-do-
-do-
6
-do-
-do-
Make : HP / Desmat
6
-do-
-do-
Make: Tech-Com
Model : SSD-235
IDE/SATA
Make: Tech-Com
2
-do-
-do-
2
-do-
-do-
-do-
-do-
a.
b.
c.
d.
e.
IC Number7400
(NAND
gate)
IC Number
7402(NOR
gate)
IC Number7408 (AND
gate)
IC Number7432 (OR
gate)
IC Number7486 (XOR
100
100
100
100
100
24
Including
installation.
gate)
IC Number7404 (NOT
gate)
g. IC Number7483 (4 bit
adder)
h. IC Number7476 (J-K
FF)
i. IC Number7410 (3
input
NAND)
j. IC Number7411 (3
input AND)
k. IC Number7411 (3
input AND)
l. IC Number7487 (16 bit
RAM)
m. IC Number74153 (4 to
1 MUX)
n. IC Number74138 (3 to
8 decoder)
o. IC Number7474 (D FF)
p. IC Number74181 (4 bit
ALU)
f.
50
50
100
50
50
50
Including
installation.
50
50
50
50
Including
installation.
50
** Make , Model and Detailed Specification must be mentioned for Item No. 1 – 33, without these tender will
not be taken into consideration.
*** Rate of each model should be quoted individually.
MAINTANANCE
Sl.
No.
1
2
Brief Description
of Goods
AMC of Computer
and accessories
With Spares
AMC of
Aquaguard water
Purifier
Specification
Location /
Laboratory
Other
information,
if any
75
IT Deptt.
xx
01
-do-
xx
Quantity
To be inspected at the
department .
Make: Aquaguard
Model: Booster
25
Delivery
Period /
Job
Duration
3
4
6
AMCof LAPTOP
with spares
HP /Lenovo
06
-do-
xx
AMC of Air
Conditioner with
gas recharging,
replacement of
spares.
Blue star / Voltas (1.5 ton /
2.0 ton)
04
-do-
xx
25
-do-
xx
AMC of
Microprocessor Kit
Item no 1:
Digital IC trainer kit specifications:
Power Supply
Special Features
Supplies
+5V/1A, ±12V/500mA
Ripple
Less than 1mV
Regulation
Less than 0.1%
Protection
Protection against Load and short circuit
BCD to Seven Segment Decoder 2 Segments
TTL Clocks
Indication of output
1Hz to 1MHz
Single/Dual colour
High intensity LED
Monopulse
Physical Parameters IC Sockets
High &Low
Four 16 Pin ZIF Sockets
two solder less Bread board
Accessories
Power Supply
Special Features
Logic I/P and 0/P
12 No's
Dimension of Terminals
2mm Sockets
Fuse
5 amp
Manual
One Set
Patch cords
One set of 10 No's
Supplies
+5V/1A, ±12V/500mA
Ripple
Less than 1mV
Regulation
Less than 0.1%
Protection
Protection against Load and short circuit
BCD to Seven Segment Decoder 2 Segments
TTL Clocks
1Hz to 1MHz
Indication of output
Single/Dual colour
26
High intensity LED
Monopulse
Physical Parameters IC Sockets
High &Low
Four 16 Pin ZIF Sockets
two solder less Bread board
Accessories
Logic I/P and 0/P
12 No's
Dimension of Terminals
2mm Sockets
Fuse
5 amp
Manual
One Set
Patch cords
One set of 10 No's
item no 2: desktop computer
Technical specifications:

CPU: 4th Generation Intel® Core i5 -4770 (3.50GHz, 8MB L3 Cache and 4cores)

Chipset & MBD: Minimum Intel Q87 Express or equivalent or higher series Chipset on Intel / OEM
Motherboard

Memory: Min 8GB RAM, 1600 MHz, non-ECC DDR3 SDRAM dual channel with 4 DIMM slots,
expandable.

Hard Disk Drive: Min. 500 GB SATA HDD at 7200 rpm

Suitable storage controller

Graphics: Min.1GB NVidia or AMD or equivalent Graphics on PCI

Monitor: Min. 15 inch

Keyboard: OEM's Standard windows KBD

Mouse: OEM’s USB 2 button Optical Scroll Mouse

Audio: Integrated internal speakers with min 1.5W

Optical Drive: One Internal SATA 8X or better DVD +/- RW (DVD writer). The make of the drive should
be of same make (OEM) of system.

Operating System: pre-installed DOS

The product details / brochure should be available in OEM’s website and should be enclosed with the
technical quote. Indicate the website address for the complete details of the quoted item.
Item no 3: Laptop Computer
Technical specifications:

Make: HP/Dell ,Intel Core i7 processor 4th generation (4710HQ), 2.5 Ghz, 8GB Ram,1 TB hard disk OS:
windows 8.1, graphics memory 2 GB (GDDR5), 15.6 inch LED display or lower , multi touch display,
weight 2.5kg or less, 5-8 hour battery back-up, bag pack.
27
Item No. 5:
Copier / Xerox Machine
Copy
Copy Type
Monochrome Laser
Copy Speed
25 / 26cpm (A4 / LTR)
Copy Resolution
Up to 600 x 600dpi
Halftones
256 Levels
Warm up Time (from Power On)
13.5secs.
Recovery Time (from Sleep Mode)
2secs. or less
First Copy Time (FCOT)
9.0 / 8.7secs. (A4 / LTR)
Paper Source(s)
250-sheet cassette
1-sheet multipurpose tray
Paper Weight
60 to 163g/m2 (cassette), 60 to 163g/m2 (multipurpose tray)
Papet Output
100 sheets (face down)
Duplex Copy / Bind Type
1 to 2, 2 to 2, 2 to 1 / Book, Calendar
Reduce / Enlargement
25%, 50%, 70%, 81%, 86% / 115%, 122%, 141%, 200%, 400% (AB
system)
25%, 50%, 64%, 78% / 129%, 200%, 400% (Inch system)
25%, 50%, 70% / 141%, 200%, 400% (A system)
Zoom
25 - 400% in 1% increments
Document Feeder
50-sheet (DADF)
Copy Size
Platen:
Up to A4 / LTR
DADF:
140 x 127mm to 216 x 356mm
Copy Features
Memory Sort, 2 on 1, 4 on 1, ID Card Copy
Copy Memory
64MB (Shared)
Print
Printer Type
Monochrome Laser
Print Speed
25 / 26ppm (A4 / LTR)
First Printout Time (FPOT)
6.0 / 5.8secs. (A4 / LTR)
Print Language
UFR II LT (Host Based)
Print Resolution
600 x 600dpi
1200 (equivalent) x 600dpi quality
Duplex Print
Yes
Print Memory
64MB (Shared)
Scan
Scan Type
CIS
28
Scan Resolution
Optical:
Up to 600 x 600dpi
Driver enhanced:
9600 x 9600dpi
Colour Depth
24-bit
Document Size
140 x 127mm to 216 x 356mm (DADF)
Duplex Scan
Yes
Compatibility
TWAIN, WIA
Output File Format
Win:
Hi-Compression PDF, Searchable PDF, PDF,
JPEG, TIFF, BMP
Mac:
PDF, JPEG, TIFF, BMP, PNG
Pull Scan (via MF Toolbox)
Yes, USB and Network
Scan To PC (via MF Toolbox)
Yes, USB and Network
FAX
Modem Speed
Up to 33.6Kbps
Fax Resolution
Up to 203 x 391dpi (super fine)
Memory Capacity
256 pages*1
One-touch Dial
4 locations
Speed Dial
100 locations
Duplex Fax
Yes (reception)
Receive Mode
FAX Only, Manual, Answering, Fax / Tel Auto Switching
Fax Features
Remote RX, Dual Access
Memory Backup
Yes, 5 minutes
PC Fax
Yes (sending only)
Interface / Software
Standard Interface(s)
USB 2.0 Hi-Speed, 10 / 100 Base-T / Base-TX Ethernet, Wireless
iEEE802.11 b/g/n
USB Function
Print, PC Fax and Scan
Network Function
Print, PC Fax and Scan
Network Protocol
TCP/IP
Operating System
Windows XP (32 / 64-bit)*2, 2000, Server 2003 (32 / 64-bit)*2, Server 2008
(32 / 64-bit)*2, Windows Vista (32 / 64-bit)*2, Windows 7 (32 / 64-bit)*2
Mac® OSX*3, Linux*4
Utility / Bundled Software
Presto PageManager
General Specifications
LCD Display
5-line LCD with backlight
Dimensions (W x D x H)
With the cassette closed: 390 x 429 x 361mm
Weight
With the cassette
opened:
390 x 448 x 361mm
Without cartridge:
12.9kg
29
Power Consumption
TEC (Typical Electricity Consumption)
5
With cartridge:
13.5kg
Max:
1,290W
During operation:
490W
Standby:
10W
Energy Saver Mode:
Approx. 2.9W / Approx. 3.5W (wireless)
1.00kWh/W
Toner Cartridge*
Cartridge 328 (2,100 pages)
(Bundled cartridge: 1,000 pages)
Monthly Duty Cycle +
10,000 pages
Item No. 6: Iron Filter and Sediment Filter
Accessories:
Rawl Plug & Self Tapping Screws
4 Nos.
Back Flush Adaptor
1 no.
EVA Tube (1.5 mtrs.) with tap attachment 1 no.
Outlet spout
1 no.
PF Nozzle
1 no.
Technical Specification: Dimensions (H X W X D)
305mm x 215mm x 1054mm
Net weight of the product
2.4kg
Recommended for
5ppm for Iron
Recommended Usage
6000 ltrs.
Recommended input water pressure 0.3kg/cm2
Item No. 7: Water Purifier cum Cooler
Approximate External Dimension (W X
DXH)
Operating Power Supply
Running Current in Amps.(Max)
640 x 450x 1350
Power in Watts (Max)
Water Storage Tank Capacity
HCapacity with Comfort Level Water
Outlet Temperature at 17° C ± 1° C
Compressor Make
Refrigerant
No. of Faucels
No. of Stages for Filter cum:
700 ± 10 %
80 Ltr.
60 Ltr.
Purifier : Stages Details
1. Particulate Filter 2. Pre Carbon Block Filter 3. Anti Scalant Filter 4.
Sediment Filter 5. Reverse Osmosis membrane Filter 6. Post Carbon
Block Filter 7. Nano Silver Leaching Filter
48 V DC & 24 V DC or 24 V DC
SS 304
Front SS 304 Rest GI Powder Coated/Pre Coated
Indoor
RO System Operating Voltage
Stoarge Tank Material
Outer Body Material
Type of Installation
230 ± 10 % V AC, 50 Hz
4.5 ± 10 %
Copeland or Tecumseh
Freon22
2
7
---------------------------END--------------------------------------------------30
PURCHASE PROPOSAL
Electronics & Communication Engg. Dept.
Jalpaiguri Govt. Engg. College
STATE PLAN 0F 2015-16
UNDER THE HEAD “2203”
Sl. No.
1.
Item
Amplitude Modulator
Transmitter Kit
2.
Amplitude
Demodulator Receiver
Kit
3.
Frequency Modulator
Transmitter Kit
4.
Frequency
DeModulator
Receiver Kit
PCM generation and
Demodulation Kit
5.
Specification
For Laboratory experiment of
AM/DSB/SSB, input Carrier:01000Khz ,modulating input:0.1100Khz
For Laboratory experiment of
Amplitude Demodulation, Superheterodyne AM receiver
withAGC(400KHz~1500KHz)
RFamplifier400KHz~1650KHz
,Local oscillator of 500KHz~
2.1MHz frequency
Quantity
2
For Laboratory experiment of FM
/PM,Frequency adjustable to
400KHZ-500KHz
For Laboratory experiment of
Frequency
and
Phase
Demodulation
For laboratory experiment of
Study of PCM Generation and
Demodulation of analog signal.
2
2
2
2
Number of bits per channel:
16 bits(Left and Right),
Sampling Rate 6-48KHz
6.
7.
8.
9.
10.
Digital Communication
Training kit
For laboratory experiment of
Analog Dual trace
Oscilloscope
MATLAB Software
30Mhz 2 channel
5
Mat Lab R2015a,Version 8.5
,user-5
For the experiment of Control
System Laboratory
1
Control Engineering
Trainer Kit
Connecting Wire
2
Study and analysis of ASK
modulation, ASK
demodulation, FSK
modulation, FSK
demodulation, BPSK
modulation, BPSK
constellation, BPSK
demodulation
5
Standard wires for breadboard 10 roll with different
colour
use 100metres roll
31
11.
12.
13.
14.
Battery 1
Battery 2
Capacitor
Bread board
15.
Circuit Component, IC
16.
Transistor IC
Maintenance:
Sl. No.
1.
Name of the Work
Battery 1.5 Volt
Ni-cd battery 9 Volt
0.1 microfarad disc 16 Volt
For Laboratory experiment
Purpose
IC 741, 555, 7400, 7404,
7408, 7432, 7486,
20
20
20
15
Transistor BEL 157, BEL
158, BEL 159, BC 557,
BC558
15 each
Specification
Repair
and SONY
maintenance of LCD Model no: VPL-EX7
Projector
Model no: VPL-ES3
H.O.D.
ECE
JGEC
32
20 each
Quantity
2
Proposal for State Plan of the year 2015-2016
(Under the Head “2203”)
For
Central Computer Centre
JalpaiguriGovernmentEngineeringCollege
Brief
Description of
Goods
Sl.
No.
1
Air Conditioner
2 Ton 5 Star
(Split AC)
Fire
Extinguisher
2
3.
Specification
Quantity
Split AC 2 Ton 5 Star
Make: Voltas/Hitachi/
Bluestar/Carrier
04
Dry powder type
Capacity: 5Kg
04
White Board
1
4.
White Board
Marker
5.
Laptop
Delivery
Period / Job
Duration
Place of
Delivery
Installation
Requirement, if
any
Within a week
from the date
of work order
Within a week
from the date
of work order
At the
respective
department
At the
respective
department
Including
installation.
Within a week
from the date
of work order
At the
respective
department
Including
installation.
Within a week
from the date
of work order
At the
respective
department
Including
installation.
Including
installation.
50
Core i5/8 GB RAM/1
TB HDD/2 GB
Graphics
Card/Windows 8.1
01
Item no 5: Laptop
Technical specifications:

Make: HP/Dell ,Intel Core i5 processor 4th generation (4710HQ), 2.5 Ghz, 8GB Ram,1 TB hard disk OS:
windows 8.1, graphics memory 2 GB (GDDR5), 15.6 inch LED display or lower , multi touch display,
weight 2.5kg or less, 5-8 hour battery back-up, bag pack.
** Make , Model and Detailed Specification must be mentioned for Item No. 1 and 5,
without these tender will not be taken into consideration.
MAINTANANCE:
Sl.
No.
Brief
Description of
Goods
Specification
Quantity
Delivery
Period /
Job
Duration
02
Within a
week from
the date of
work order
1.
Repairing of UPS
including spares
Numeric
Digital HPE
1500
15 KVA
33
Location /
Laboratory
Other
information,
if any
-do-
xx
MATHEMATICS DEPARTMENT,
JGEC
STATE PLAN OF 2015-16 UNDER THE HEAD 2203
TENDER SPECIFICATION
ITEMS FOR PURCHASE
AIO Computer (Specification: 4 th genera tion Intel (R) Core i5
Processor, Windows 8.1 single Language 64 Bit , 4 GB Memory,
1TB Hard Disc, Microsoft Office 2013 , 19.5 Inch LED Backlit
Display)
Quantity
2 Nos
2.
UPS APC 500 VA
1 No.
3.
Toner CARTRIDGE for Canon Image Class MF4320d Printer
(Specification: FX 9 Toner Cartridge )
1 No.
4.
Antivirus (3 in 1 pack) (Specification : QUICK HEAL)
1 No.
1.
MAINTENANCE AND REPAIRING WORK
AMC and Repairing of Computers and Accessories with spare parts
and internet security / total security
4 Nos.
Sl. no.
1.
2.
AMC and Repairing of Dell Studio 15 Laptop with spare parts and
internet security/ total security
1 No.
3.
AMC and Repairing of Canon Image Class MF 4320d
(Printer+scanner+copier) with spare parts
1 No.
4.
AMC and Repairing of Canon LBP 2900 Printer with spare parts
1 No.
5
Repairing of APC Back UPS ES 500
3 Nos.
6
Repairing of UPS ELNOVA
1 No.
7
AMC of AQUA GUARD Water Purifier (EUREKA FORBES)
1 No.
Note: Items may be inspected any day before the submission of tender documents in between
1:30 pm to 2:30 pm .
Head,
Department of Mathematics
Jalpaiguri Govt. Engineering College
34
Department Of Physics,
Jalpaiguri Govt. Engg. College
List of Equipments/ Accessories to be purchased in the F. Y. 2015-16
under State Plan
1. Expt. Set-up for the determination of wavelength of sodium light by Newton’s
Ring Method (Bridge-type travelling microscope along with sodium vapour lamp
with proper housing and leak- transformer (transformer-type) for vapor lamp).
2. Digital multimeter (level accuracy 1/32 inch over 72 inches, length 18 cm and
above, non-magnetic electronic level).
3. Low resistance coil – 0.1Ω, 0.2 Ω, 0.5 Ω, 1 Ω, 2 Ω.
4. Four gap meter bridge with jockey.
5. IC regulated dc power supply 2V, 4V, 6V, 12V.
6. Travelling microscope (v.c. 0.001 cm) (INCO make preferable).
7. Probes for measuring Hall voltage
8. Probes for measuring Band-gap (4-probe method).
9. Potentiometer with jockey.
10. Thermocouple for determination of thermo-emf (two different types) fitted with
funnel and two bickers of glass make.
11. Ballistic galvanometer (resistance 100-500 Ω, time period 10-15 seconds) along
with lamp and scale arrangement.
12. Tool-kit (including screw-driver, plus and allied tool-parts).
13. Computer- Interl core i5, 1TB HDD, 4GB RAM, 17” Monitor with UPS.
14. UPS for desktop computer.
35
Chemistry Department
2203 HEAD STATE PLAN 2015-16
5.
6.
7.
8.
Glassware and Instruments:
Items
Make
BOD incubator (capacity: 4 cu ft)
CENSIA/ SENTWIN
(Specifications: working temperature
range 5-60°C, 1°C accuracy, and digital
temperature controlling system)
Water bath (six holes)
CENSIA/ USHA
(Specification: Thermostatic control
double wall with outer body made of
PCRC sheet duly powder coated and
inner chamber and concentric rings made
of SS Sheet grade 304. Temperature
range 300c-1000c, accuracy: 1°C)
Computer (Specification: Intel Original
Assembled Desktop
Motherboard, Intel Core I5 processor,
DDR3 Ram 6GB, Harddisk 1 TB, LG/
Samsung 19′′ LED Monitor, Cabinet,
Logiteck Keyboard, Logiteck Mouse, APC
600VA UPS
Flame photometer with sodium and
DIGILAB/ USHA
potassium filters
BOD Bottles (300 mL capacity)
Borosil
Beaker 100 mL
Borosil
Pinch cock (galvanized) with screw
Reputed Company
Rubber tube (for viscometer)
Dominion
9.
10.
11.
12.
13.
14.
15.
16.
17.
Potassium dihydrogen phosphate
Dipotassium hydrogen phosphate
Mohrs’ salt
Silver nitrate
Disodium hydrogen phosphate
Calcium chloride dihydrate
Sodium azide
Magnesium sulfate
Phosphoric acid
1 x 500 g
1 x 500 g
5 x 500 g
1 x 25 g
1 x 500 g
1 x 500 g
1 x 100 g
1 x 500 g
5 x 500 mL
18.
19.
20.
Optical Mouse
Mouse pad
Antivirus (3 in 1 pack)
3 Nos.
3 Nos.
1 No.
21.
Desktop computers
Sl. no.
1.
2.
3.
4.
Chemicals
E. Merck
E. Merck
E. Merck
E. Merck
E. Merck
E. Merck
E. Merck
E. Merck
E. Merck
Computer Accessories
Frontech
Frontech
Quick Heal
Repairing and Maintenances
Assembled
Head of the Department
Department of Chemistry
Jalpaiguri Govt. Engineering College
36
Quantity
1 No.
1 No.
1 No.
1 No.
10 Nos.
40 pcs.
20 pcs
1 coil (10
meters)
3 Nos.
DEPARTMENT OF WORKSHOP
JALPAIGURI GOVT. ENGINEERING COLLEGE
JALPAIGURI
TENTATIVE BUDGET PROPOSAL FOR THE FINANCIAL YEAR 2015-16 IN THE HEAD OF BUDGET
“2203” TO ACHIEVE ACADEMIC EXCELLENCE OF THE DEPARTMENT AND SECTIONS.
SL.N
O.
1
ITEM
QTY
MACHINE SHOP REQUIREMENTS
Cutting Compound oil.
Make – VEDOL or IOC. Amulkut..
10
11
12
Hacksaw blade for metal cutting, 12.7mm,
MIRANDA Make
Bakelite round rod dia 50mm and 75mm.
Mobil. PRIDE 40, Indian Oil
Multipurpose Grease, BL make
R.O. / U.V. type water purifier system, Make:
PKL/Eureka Forbes, installation and
commissioning included.
CARPENTRY SHOP
Electric Planer Power Tool for Woodworking.
Specification: Rated Voltage: 220V, Rated
frequency: 60 Hz, 2.6 AMP_ No-load.
16,000 rpm No-load speed, Motor size: 55 x
46mm. Motor Power: 500 Watt. 3-1/4 “
Planning Width, V-Groove in front to help
guide in chamfering with safety guard. And
associated all accessories.
Circular saw power tool Standard dia
DOL Starter for 3.7 kw, 415 V, 3ph induction
motor. Make: L&T/HAVELLS (To be
checked before quote)
Fevicol Adhesive
Nail 2”, 2 ½ “, 3”
Sand Paper, Size 40, 50 & 60
13
Drill bit ¼ “, 4/16 “, 1/32 “
14
Pedestal Type Disk sander
Electrically operated
FORGING & FOUNDRY SHOP
Bentonite power
Murcury
Raw Coal
Diesel
Lead Ingot, Make: Hindulco
Graphite Powder
ITEM
2
3
4
5
6
7
8
9
15
16
17
18
19
20
SL.N
O.
machine,
20Lts
500 Pcs
10 Kgs
10 Ltrs
10 kgs
01 No.
03 Nos.
03 Sets
03 Nos.
02 kgs
02 kg each
25 Nos.
each
12 Nos
each
02 Nos.
200 Kgs
15Kg
4 Ton
200 Ltrs
200Kgs
100 Kgs
QTY
37
21
22
23
24
25
26
27
28
29
DEPARTMENTAL REQUIREMENT FOR
ALL
Computer: Intel Pentium IV,Duo Core2,
160GB HDD, 2GB RAM DDR 3 or Higher
Desktop computer, with 17” LCD monitor,
TFT active matrix XGA (1024x768) Graphics
Controller-ATI, Intel chipset Pentium mother
board with inbuilt AGP, Sound Card, inbuilt
Internal Modem, TV toner card in separate,
CD, DVD combo drive, TFT- Audio Outputsoundcard Telecom- FAX / modem –CDC56 kbps Networking-Network adapterEthernet, Fast Ethernet, Gigabit Ethernet
80211.a/b Wi-Fi, Bluetooth Input DeviceKeyboard, 3D optical mouse with USB port,
Microsoft Windows XP Professional
preloaded as operating system including
associated multimedia kits. Make: HP only
Cartidge for canon PIXMA MP240 series:
CL-811 Color fine cartidge & PG-810 Black
fine cartidge
Refilling of Cartidge 303 for canon LBP 2900
2 GB DDR3 RAM
A4 Size Paper; 21cm x 29.7cm; 75GSM;
Copy Power; BILT (qty. 500 each pkt)
Smart Extension socket with spike buster
and two USB Ports for Charging (DUO)
3 core insulated cable for 220V, 15 amp,
50Hz
Steel Almirah Make : Godrej / Khaitan /
Godrej
Repairing of Acquaguard-Model: Classic, eboiling.
* Note: Quantity may change at the time of
placing the order.
02Nos.
02 Sets.
06 Nos.
05 Nos
10 pkts
10 Nos.
200 mtr
02 Nos.
02 Nos.
38
INVITATION FOR QUOTATIONS FOR SUPPLY OF GOODS OF CWN SECTION
UNDER STATE PLAN 2015-16
To
___________________________________
___________________________________
Dear Sirs
Sub :
INVITATION FOR QUOTATIONS FOR SUPPLY OF EQUIPMENTS/GOODS OF CWN SECTION
You are invited to submit your most competitive quotation for the following items:
Sl
No
ITEM
Specification
Quantity
Delivery
Period/
Job
Duration
Place of
Delivery
Installation
Requirement, if
any
1.
Firewall
See Annexure-I for detailed specifications
1
4 weeks
Jalpaiguri
Govt.
Engg.
College
To be installed and
configured as per
our requirement s
by the Supplier.
2.
Battery for
UPS
(42 AH)
Sealed Maintenance Free Battery (12V, 42 AH) 40
for 5 KVA Online UPS
Nos.
Make: Exide / Panasonic
4 weeks
Jalpaiguri
Govt.
Engg.
College
The batteries are
to be installed and
tested by the
supplier at the
College Site.
(Installation with new cables for connecting
batteries with copper lugs of suitable sizes)
Cable size: 10sq mm (Make: Finolex, Polycab)
3.
Battery for
UPS
(7 AH)
Sealed Maintenance Free Battery (12V, 7
AH) for 1KVA and 600 VA off-line UPS
Make: Exide / Panasonic
With installation
20
Nos.
4 weeks
--do-
4.
1 KVA
Online UPS
1 No.
4 weeks
--do-
To be installed by
the Supplier at the
College Site.
5.
Air
Conditioner
Input Voltage Range: 170-280 V, Input frequency
Range: 47-54 Hz, Single Phase, Output Voltage:
220V/ 230V/ 240V AC, Voltage regulation: 1%,
Output Frequency(Battery Mode) :50 Hz+0.1%,
Sine Wave, Indications: Mains ON, Inverter
ON/Faulty, Battery Level, Load Level, Sealed
Maintenance Free Lead Acid Battery(12V-42AH - 3
Nos. Exide/Panasonic/APC),
Make: APC/ AVO/ V Guard
With installation & two years warranty
(Mention Make & Model of UPS and Battery)
1.5 ton Split type wall mounted AC Energy star
rating: 3
Make: LG/ Whirlpool/ Godrej/ Voltas
4 No.
4 weeks
--do-
To be installed by
the Supplier at the
College Site.
Quoted price inclusive of installation at the
College site.
39
Annexure- I
Technical Specifications
Parameter
Hardware and
Performance
Feature
The appliance should have the following features and functionalities:
 Firewall should have 8x1GE integrated data ports
 The appliance should be capable of providing Firewall, VPN Services and Next Generation Firewall
feature
 Should have a 64Bit Multi-Core Processor and should not be ASIC based architecture
 The platform shall have dedicated interface for out-of bound management
 The Firewall should support CA functionality
 Firewall performance (Large packets) 1.8 Gbps with multiprotocol performance of 900 Mbps
 Firewall should be capable configuring Policies using Command Line (CLI) as a last resort in case of
Emergency.
 Firewall should support maximum 250,000 concurrent connections
 Firewall should support maximum 20000 new conections per second (cps)
 Should deliver VPN throughput of 250 mbps
 Firewall should support upto 5 virtual context/firewall
 Shall support netflow Version9 provides near real time view of what is happening on the network and
assists in diagnosing network issues
 Firewall should should support memory upto 8 GB Memory for better and faster processing.
General
features
 The firewall shall be deployed in high availability mode (hot stand-by redundancy), have fault
tolerance and shall provide stateful failover.
 The firewall shall have a powerful OS that is hardened and is based upon minimal feature sets.
 There shall be support for traffic-based and user based access control.
 The broad default policy for the firewall for handling inbound traffic shall be to block all packets and
connections unless the traffic type and connections have been specifically permitted.
 It shall support SNMP (Simple Network Management Protocol) v 2.0 and v 3.0.
 Firewall should support Single Sign On (SSO).
 Should support translating between IPv4 and IPv6 for the following inspections:
 DNS
 FTP
 HTTP
 ICMP
 Network address translation (NAT) shall be supported so that the private IP addresses of hosts and the
structure of an internal network can be concealed by the firewall.
 Network Address Translation (NAT) shall be configurable as 1:1, 1: many, many: 1, many: many,
flexible NAT (overlapping IPs). Reverse NAT shall be supported.
 Port address translation/Masquerading shall be provided for.
 Dynamic Host Configuration Protocol (DHCP) over Virtual Private Network (VPN) shall be supported
for dynamic allocation of IP addresses.
 Point-to-Point Protocol over Ethernet (PPPoE) shall be supported.
 The firewall shall support a number of routing options and configurations. Routing protocol support
shall include static routes, Open Shortest Path First (OSPF), RIPv1/v2.
 Virtual LAN (VLAN) support, high port density, WAN support and expandability of interfaces over
time are some important network integration features shall be supported.
 The firewall IP stack shall be IPv6 ready.
40
Attack
protection
VoIP
support
VPN
Features
Next Gen FW
feature
 The firewall shall mask the internal network from the external world.
 The firewall shall provide robust access control capability and be fast in making access control
decisions. Access Control shall be done based on criteria such as source, destination IPs, port number,
protocol, traffic type, application, date information (day of week, time of day), etc.
 Multi-layer, stateful, application-based filtering shall be done.
 It shall provide network segmentation features with powerful capabilities that facilitate deploying
security for various internal, external and DMZ (Demilitarized Zone) sub-groups on the network, to
prevent unauthorized access.
 There shall be support for detection of reconnaissance attempts such as IP address sweep, port
scanning etc.
 Firewall itself shall be resistant to attack and shall have protection against firewall evasion techniques.
 Some basic attack protection features listed below but not limited to:
a. Maximum no of protections against attacks that exploit weaknesses in the TCP/IP protocol suite.
b. It shall enable rapid detection of network attacks.
c. TCP reassembly for fragmented packet protection.
d. Brute force attack mitigation.
e. SYN cookie protection , SYN Flood, Half Open Connections and NUL Packets.
f. Protection against IP spoofing.
g. Malformed packet protection.
h. Java blocking, and real-time alerts.
Full H.323v1-5 (Firewall Traversal), SIP (Session Initiation Protocol), gatekeeper support, outbound
bandwidth management, full interoperability with common and popular VoIP/VC gateway and
communications devices shall be supported, apart from supporting all protocols.
 The firewall shall support Internet Protocol Security (IPSec) & SSL.
 Key exchange with latest Internet Key Exchange (IKE), IKEv2, Public Key Infrastructure PKI (X.509)
shall be catered to.
 Site-to-site VPN tunnels: full-mesh / star topology shall be supported.
 Support Latest Encryption algorithms including AES 128/192/256(Advanced Encryption Standards),
3DES(Data Encryption Standard) etc.
 Support Latest Authentication algorithms including SHA-1(Secure Hash Algorithm-1), SHA-2(Secure
Hash Algorithm-2) etc.
 IPSec NAT traversal shall be supported.
 VPN supporting 300 IPSec / SSL VPN peers.
 Detection rules must be based on an extensible, open language (API) that enables users to create their
own rules, as well as to customize any vendor-provided rules.
 Detection rules provided by the vendor must be documented, with full descriptions of the identity,
nature, and severity of the associated vulnerabilities and threats being protected against.
 The detection engine must be capable of detecting and preventing a wide variety of threats (e.g.,
malware, network probes/reconnaissance, VoIP attacks, buffer overflows, P2P attacks, zero-day
threats, etc.).
 The detection engine must incorporate multiple approaches for detecting threats, including at a
minimum exploit-based signatures, vulnerability-based rules, protocol anomaly detection, and
behavioral anomaly detection techniques. Identify and explain each type of detection mechanism
supported.
 The detection engine must inspect not only Network Layer details and information resident in packet
headers, but a broad range of protocols across all layers of the computing stack and packet payloads as
well.
 The detection engine must be resistant to various URL obfuscation techniques common to HTMLbased attacks.
 The solution must be capable of detecting and blocking IPv6 attack.
 The solution must provide IP reputation feed that comprised of several regularly updated collections of
IP addresses determined by the proposed security vendor to have a poor reputation.
 The solution should be capable of providing network-based detection of malware by checking the
disposition of known files in the cloud using the SHA-256 file-hash as they transit the network (SHA256 and target IP address should be given to aid remediation efforts) with enabling justadvance
malware license if require in near future.
41
Real-Time Contextual Awareness
 The solution must be capable of passively gathering information about network hosts and their
activities, such as operating system, services, open ports, client applications, and vulnerabilities, to
assist with multiple activities, such as intrusion event data correlation, elimination of false positives,
and policy compliance.
 The solution must be capable of passively gathering information about session flows for all monitored
hosts, including start/end time, ports, services, and amount of data.
 The solution must be capable of storing user-defined host attributes, such as host criticality or
administrator contact information, to assist with compliance monitoring.
 The solution must be capable of passively gathering user identity information, mapping IP addresses to
username, and making this information available for event management purposes.
 The solution must be capable of passively gathering details unique to mobile devices traffic to identify
a wide variety of mobile operating systems, mobile applications and associated mobile device
hardware
 The solution must provide a detailed, interactive graphical summary that includes data on applications,
application statistics, connections, intrusions events, hosts, servers, users, file-types, malwares and
relevant URLs. These data should be presented in the form of vivid line, bar, pie and donut graphs
accompanied by detailed lists (Administrator should easily create and apply custom filters to fine-tune
the analysis).
 Appliance have capacity to block source based on geo-location.
Intelligent Security Automation
 The solution must be capable of employing an extensive set of contextual information (e.g., pertaining
to the composition, configuration, and behavior of the network and its hosts) to improve the efficiency
and accuracy of both manual and automatic analysis of detected events.
 The solution must be capable of significantly reducing operator effort and accelerating response to
threats by automatically prioritizing alerts, ideally based on the potential for correlated threats to
successfully impact the specific hosts they are directed toward.
 The solution must be capable of dynamically tuning IDS/IPS sensors (e.g., selecting rules, configuring
policies, updating policies, etc.) with minimal human intervention.
Application and URL control
 The solution must integrate application control to reduce risks associated with applications usage and
client-side attacks. It should provide a means of enforcing acceptable use policies of up to 3000
application detectors.
 The solution must support creation of user-defined application protocol detectors.
 The solution must have content awareness with comprehensive file detection policies and blocking of
files by types, protocols and directions.
 The proposed solution should provide an option to include URL filtering for enforcing Internet
content filtering so as to reduce web born threats and improve productivity.
 Each URL in the data set must has an associated category and reputation. URL category is a general
classification for the URL while URL reputation represents how likely the URL is to be used for
purposes that might be against the organization’s security policy.
 The solution must be capable of easily identifying all hosts that exhibit a specific attribute or noncompliance condition.
Network Behavior Analysis (NBA)
 The solution must provide a full-featured NBA capability to detect threats emerging from inside the
network This includes the ability to establish “normal” traffic baselines through flow analysis
techniques (e.g., NetFlow) and the ability to detect deviations from normal baselines.
 The NBA capability must provide visibility into how network bandwidth is consumed to aid in
troubleshooting network outages and performance degradations.
 The NBA capability must provide the ability to link Active Directory and/or LDAP usernames to IP
addresses related to suspected security events.
 The same network devices used for IPS must also be used as part of the NBA capability. No NBAonly device should be required.
 The same management platform used for IPS must also be used to manage the NBA capability. No
NBA-only management components should be required.
42
NGFW Management and Usability
 The management platform must be capable of centralized, life cycle management for all NGFW
services/devices.
 The management platform must be delivered in virtual appliance form factor (management system and
UI must provide the same features and functions as in the physical appliance).
 The management platform must be capable of aggregating IDS/IPS events and centralized, real-time
monitoring and forensic analysis of detected events.
 The management platform must be accessible via a web-based interface and ideally with no need for
additional client software.
 The management platform must provide a highly customizable dashboard.
 The management platform must be capable of integrating third party vulnerability information into
threat policy adjustment routines and automated tuning workflows.
 The management platform must be capable of role-based administration, enabling different sets of
views and configuration capabilities for different administrators subsequent to their authentication.
 The management platform must include a scheduling subsystem to facilitate automation of routine
tasks, such as backups, upgrades, report creation, and policy application.
 The management platform must include one or more default (i.e., pre-defined) detection policy
configurations to help simplify initial deployment.
 The management platform must provide the capability to easily view, enable, disable, and modify
individual rules, as well as groups or categories of rules.
 The management platform must be capable of automatically receiving rule updates published by the
vendor and automatically distributing and applying those rule updates to sensors.
 The management platform must be capable of automatically receiving rule updates published by the
vendor and automatically distributing and applying those rule updates to sensors.
 The management platform must be capable of backup and rollback for sensor configurations and the
management platform itself.
 The management platform must include flexible workflow capabilities for managing the complete life
cycle of an event, from initial notification through to any response and resolution activities that might
be required.
 The management platform must provide the ability to view the corresponding detection rule for each
detected event, along with the specific packet(s) that caused it to be triggered.
 The management platform must support both internal and external databases/systems for storage of
event data, logs, and other system-generated information.
 The management platform must be capable of synchronizing time between all components of the
system via NTP.
 The management platform must be capable of logging all administrator activities, both locally and to a
remote log server.
 The solution must support LDAP for single sign-on to sensors and the management console.
Subscription
WARRANTY
Reporting and Alerting
 The management platform must provide robust reporting capabilities, including a selection of predefined reports and the ability for complete customization and generation of new reports.
 The management platform must allow quick report customization by importing from dashboards,
workflows and statistics summaries.
 The management platform must provide multiple report output types or formats, such as PDF, HTML,
and CSV.
 The management platform must support multiple mechanisms for issuing alerts (e.g., SNMP, e-mail,
SYSLOG).
Intrusion Prevention System(IPS), Advanced Malware Protection(AMP) and URL Filtering Licenses
along with 3 Years Subscription
Three (3) years comprehensive Warranty including Update, Upgrade and Technical Assistance from
OEM for 36 months from the date of installation of the equipment.
In-Charge
CWN SECTION
Jalpaiguri Govt. Engg. College
PRINCIPAL
Jalpaiguri Govt. Engg. College
43
INVITATION FOR QUOTATIONS FOR SUPPLY OF GOODS UNDER STATE PLAN HEAD “2203” OF 2015-16
EPABX DEPARTMENT/SECTION
To
______________________________________
______________________________________
Dear sir,
Sub: INVITATION OF QUOTATIONS FOR PURCHASING OF EQUIPMENTS/GOODS AS WELL AS AMC WORK OF
WIRELESS EPABX SYSTEM OF JALPAIGURI GOVT. ENGG. COLLEGE.
You are invited to submit your most competitive quotation for the following repairing and maintenance work.
Item Brief Description
No. of the goods
Specification Qty.
Delivery Period/
Job Duration
Place of Installation
Delivery requirement,if any
Repairing and Maintenance
1.
AMC for
WIRELESS EPABX
SYSTEM
-----
11.00 A.M to 4.00
P.M (Monday-Friday).
11.00 A.M to 12.30
P.M(Saturday)
As annexed
JGEC
--------------
JGEC
Including Fitting of
Battery replacing
old/ spoiled battery
Equipments
1.
a) Battery
b) Charger.
( model: Gigaset
SL2 Professional
Make Siemens)
As annexed
a) 15
b) 05
11.00 A.M to 4.00
P.M (Monday-Friday).
11.00 A.M to 12.30
P.M(Saturday)
COORDINATOR, EPABX
Jalpaiguri Govt. Engg. College
Jalpaiguri
PRINCIPAL
Jalpaiguri Govt. Engg. College
Jalpaiguri
44
Annexure
Repairing and Maintenance
The Institution has wireless EPABX system with the following items(all are Siemens make).AMC for 01(one) year
for the following items is invited. During the AMC period, the selected bidder must visit and inspect the EPABX
system at least once in every month and on demand.
Item No.
1
Brief Description of the Goods
Main EPABX system EPABX (MODEL-Hipath 3500, Make Siemens)
DECT BASE Station
System side Krone MDF with Integrated Protection Modules for all Trunks and
Extensions
DECT Handset with Charger( Model-Gigaset SL@, Make Siemens)
Digital Operator Console
GSM Router for GSM Trunk Connectivity
Digital key phones
Schedule for visit of the Goods and Equipments for Maintenance:
Date
Venue/Lab Period
Any Office day
JGEC
11.00 A.M to 4.00 P.M (Monday-Friday).
before
11.00 A.M to 12.30 P.M(Saturday)
Placing tender
documents
after tender notice
publication
Qty
01
04
01
30
01
01
01
Contact Person
Coordinator/Members
EPABX
Equipments
Item No.1.
The Battery and Charger should be compatible or work with the existing Gigaset SL2
Professional Handset.
Office of the Principal
Jalpaiguri Govt. Engg. College
Jalpaiguri
45
Remarks
Central Library
BUDGETARY PROPOSAL FOR STATE GRANT UNDER PLAN HEAD 2203:
Budget Provision under Plan Head -2203 for F.Y. 2015-2016
Ref. No. 1173, dated 19.06.2015
TENDER SPECIFICATION
A. Purchase of Equipment:
Sl. Description of the Items
No.
1
Refilling of fire extinguisher refill
Specification of the Items
Qnty.
Specification:
Co2 Type
Capacity: 2kg
Specification:
Water Type
Capacity : 9ltrs.
Specification:
Dry Powder Type
Capacity : 5kg
TVS GOLD
03
2
Refilling of fire extinguisher refill
06
3
Refilling of fire extinguisher refill
4
TVS Gold Keyboard for Computer
5
Single sided all steel book rack
Made by Godrej Co.
W- 900mm X D-316mm X H-1850mm
10
6
All steel periodical rack
Made by godrej Co.
W-900mm X D-450mm X H-1830mm
02
7
Pedestal Fan
Made by Havells Co.
Sweep: 400mm; Power input: 55 watts;
Speed 1350 RPM;
05
04
04
Page No. 1 of 2
46
A. Maintenance Works:
Sl.
No.
1
Description of the Items
Specification of the Items
Qnty.
Comprehensive AMC
for 20 nos. CPU,
Monitor & UPS,
including spare parts (if
required any)
20
2
Comprehensive AMC
for 1 no. Server,
Monitor (18.5”) & UPS
including spare parts (if
required any)
Specification:P4 1.6/1.8/
2.0 and so on; normal
processors, Intel chipset,
Mother board, 512 MB
DDR RAM, HDD20/40/60/80, 15” – 18.5”
desktop monitor/TFT,
DVD/CD RW/ROM, ATX
Cabinet, Key Board, Scroll
Mouse, Network Card
10/100
Specification:1.
a).Processor: core 2 duo
2.80 ghz, b) Chipset: intel
G33, c) MB: OEM,
d) Memory: 1GB,
e) HDD: 160GB sata, f)
Optical Drive: sata 16x
DVD ROM, g) Graphics
: integrated on board, h)
Power Supply: 300wts.,
i)Monitor: 18.5” LCD,
j) Key board: TVS gold,
k) Mouse: Logitec Scrol,
l) Operating System: Pre
installed window vista
3
Comprehensive AMC
for Library Networks
maintenance including
Cable Switch & Router
Comprehensive AMC
for Close Circuit
Camera along with
Spyware H.264 DVR
Top up of RIM
24 ports Cisco
01
Spyware H.264DVR
01
RIM Cord Less Telephone
,
01
4
#5
*Note: Item No. #5 would be purchased directly; Tenderer
should not be quoted for this item
** Note: Rate should be quoted including VAT charges.
Librarian-in-Charge
Page No. 2 of 2
47
02
Proposal for the State Plan of the year 2015-2016
(Under the Head “2203”)
FOR
EXAMINATION SECTION
Jalpaiguri Government Engineering College.
31.
Laptop
As per enclosed
specification
01
32.
Color Laser jet Multi
function Duplex
printer
2 TON SPLIT AC
(Wall Mounted)
As per enclosed
specification
01
-do-
-do-
Installation
Requirement, if
any
With License
Windows8
Professional
including
installation media
kit
With Installation
As per enclosed
specification
01
-do-
-do-
With Installation
Iron Filter and
Sediment Filter for
Online Water Purifier
Kaspersky Internet
Security
Pen drive
As per enclosed
specification
01
-do-
-do-
- With Installation
3 user
02
-do-
-do-
JetFlash 350 32GB
(Black).
Revolving, high &
low adjustable,
Make- Godrej or
Multinational
equivalent company
Make : HP / Desmat
01
-do-
-do-
01
-do-
-do-
3
-do-
-do-
Make : HP / Desmat
3
-do-
-do-
Make: HP, Odyssey,
Numeric
4 shelves
Make; Godrej or
Multinational
company
75gsm
Make: KYOCHRA
Model:
TASKalpha180
As per enclosed
specification
Make : TK-439,
Toner Kit for
221/220/181/180
01
-do-
-do-
With Installation
02
-do-
-do-
With Installation
20
01
-do-do-
-do-do-
With Installation
01
-do-
-do-
01
-do-
-do-
Sl. No.
33.
34.
35.
36.
Brief Description of
Goods
37.
Executive Office
Chair
38.
HP Laserjet Toner
88A
HP Laserjet Toner
12A
UPS 0.5 KVA
39.
40.
41.
Slotted Angle Rack
6 ft x 3ft x 1.5ft
42.
43.
Printing Paper A4
Duplex unit for
Photocopier
44.
Printer
45.
Xerox machine toner
Specification
Quantity
48
Delivery
Period / Job
Duration
Within 7
days of work
worder
Examination
section/
COE section
Place of
Delivery
With Installation
** Make, Model and Detailed Specification must be mentioned for Item No. 1 – 15, without these tender will
not be taken into consideration.
*** Rate of each model should be quoted individually.
SPECIFICATION
Item no 1: Laptop
Technical specifications:

Make: HP/Dell ,Intel Core i7 processor 4th generation (4710HQ), 2.5 Ghz, 8GB Ram,1 TB hard disk OS:
windows 8.1, graphics memory 2 GB (GDDR5), 15.6 inch LED display or lower , multi touch display,
weight 2.5kg or less, 5-8 hour battery back-up, bag pack.
Item no 2:
Functions:
Print, copy, scan, fax
First page out (ready) black:
As fast as 11.5 sec
First page out (ready) color:
As fast as 13 sec
Resolution (black):
Up to 600 dpi
Resolution (color):
Up to 600 dpi
Monthly duty cycle:
Up to 30,000 pages
Recommended monthly page volume:250 to 2500
Print Technology:
Laser
Display:
3.0-in touchscreen, LCD (color graphics)
Processor speed:
800 MHz
Number of print cartridges:
4 (1 each black, cyan, magenta, yellow)
Paper trays, standard:
2
Connectivity, standard:
Hi-Speed USB 2.0 port; built-in Fast Ethernet 10/100/1000 Base-TX network port; Host USB
Network ready:
Standard built-in Ethernet 802.11 b/g/n. WiFi operates as both an AP (with Wi-Fi Direct) and STA
Ports: 1 Hi-Speed USB 2.0; 1 Fast Ethernet 10/100/1000 Base-TX; 1 Host USB
Minimum system requirements
Windows: Windows XP (SP3) 32-bit and 64-bit, Windows Win7 (Including Starter Edition 32-bit and 64-bit), Win8.
Memory, standard:
256 MB
Duplex printing:
Automatic (standard)
Media sizes supported:
A4, A5(L), A5(P), A6, B5, B6, 16k, 10 x 15 cm, Post Cards (JIS); Envelopes (DL, C5, B5)
Media sizes, custom
3 x 5 to 5 x 14 in
Media types:
Paper (brochure, plain), photo paper (borderless, HP premium, panoramic, plus tab), envelopes, labels, cards
(greeting, index), transparencies.
Power:
110-volt input voltage: 110 to 127 VAC (+/- 10%), 60 Hz (+/- 3 Hz); 220-volt input voltage: 220 to 240 VAC (+/10%), 50 Hz (+/- 3 Hz) (Not dual voltage, product varies by part number with # Option code identifier)
Print speed, black (normal):
Up to 19 ppm
Power consumption:
49
365 watts (Print/Copy), 10.5 watts (Ready), 2.7 watts (Sleep), 2.69 watts (Blue Angel Sleep), 0.97 watts (HP AutoOff/Auto-On - Wake on LAN), 0.1 watts (Auto-Off/Manual-On), 0.1 watts (Manual-Off)
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages.
This will damage the printer and void the product warranty.
Print speed, color (normal):
Up to 19 ppm
Cable included:
Yes, 1 USB
Warranty:
One-year exchange warranty
Item no 3:
2 TON SPLIT AC (Wall Mounted)
Type of Split Wall Mounted
Number of Indoor Units: 1
Capacity(Ton): 2
Cooling :6200
BEE Star Rating 5
Compressor: Number of Compressors 1
Compressor Type: Rotary
Refrigerant Gas R-22
Performance Energy Efficiency Ratio (EER) 3.51
Air Circulation (High)(M3/Hr) 1100 (CMH)
Noise Levels (Indoor)(db) 50
Power Requirement
Total Power Consumption(Watts): 1766
Running Current(Amps) 7.9
Power Supply (Volt/Phase/Hz) 230 / 1 / 50
General Features
Timers Yes
Auto Restart Yes
Sleep Mode Yes
Remote Control Yes
Air Swing Yes
Dimensions (Indoor)
Dimensions (W x D x H) 1185 x 253 x 340 mm
Weight (Indoor)(Kg) 18.30
Dimensions (Outdoor)
Dimensions (W x D x H) 900 x 360 x 700 mm
Weight (Outdoor)(Kg) 49
More Features
Other Features Anti Dust Filter, Active Carbon Filter, '- Silver Ion Filter
- LED Display
- Self Diagnosis
After Sales Service Warranty Period 1 Year
Item No. 4:
Iron Filter and Sediment Filter
Accessories:
Rawl Plug & Self Tapping Screws
Back Flush Adaptor
EVA Tube (1.5 mtrs.) with tap attachment
50
4 Nos.
1 no.
1 no.
Outlet spout
1 no.
PF Nozzle
1 no.
Technical Specification: Dimensions (H X W X D)
305mm x 215mm x 1054mm
Net weight of the product
2.4kg
Recommended for
5ppm for Iron
Recommended Usage
6000 ltrs.
Recommended input water pressure 0.3kg/cm2
Item 14.
Specifications
Print speed black
(normal, A4)
Up to 16 ppm
Print speed footnote
Speed specification per industry standard testing methods
Print quality black (best)
Up to 600 x 600 dpi (1200 dpi effective output)
Print technology
Laser
Standard memory
8 MB embedded inside SIP ASIC package; 16 KB NVRAM
Maximum memory
8 MB
Processor speed
266 MHz
Hard disk capacity
None
Standard printer
languages
Host-based printing
Paper handling
Standard paper trays
1 (plus single-sheet priority input slot)
Maximum paper trays
1 (plus single-sheet priority input slot)
Paper handling
standard/input
Single-sheet priority feed slot, 150-sheet input tray
Paper handling
standard/output
100-sheet face-down bin
Duplex print options
Manual (driver support provided)
Media sizes supported
A4, A5, A6, B5, B6
Custom media sizes
Main tray: 147 x 211 to 216 x 356 mm; input slot: 76 x 127 to 216 x 356 mm
Media types supported
Paper (laser, plain, photo, rough, vellum), envelopes, labels, cardstock,
transparencies, postcards
Finished output handling
Sheetfed
Connectivity
Standard connectivity
Hi-Speed USB 2.0 port
Optional connectivity
None
Dimensions and Weight
51
Media weights by
paper path
150-sheet tray: 60 to 163 g/m2; 10-sheet input tray: 60 to 163 g/m2
Product dimensions (W 347 x 224 x 194 mm
x D x H)
Product weight
4.7 kg
Power and operating requirements
Minimum system
requirements
Windows 2000, Windows XP Home, Windows XP Professional,
Windows Vista(TM) Ready, Mac OS X v 10.2.8, v 10.3, v 10.4 or
higher; Macintosh computer with PowerPC G3, G4, G5, or Intel
Core processor, 128 MB RAM (256 MB recommended), 120 MB
free hard disk space, CD-ROM drive, USB port
Compatible operating Windows 2000; Windows XP Home; Windows XP Professional;
systems
Windows XP Professional x64; Windows Server 2003 (32/64 bit);
Works with Windows Vista(TM); Mac OS X v 10.2.8; Mac OS X v
10.3; Mac OS X v 10.4 or higher
Power requirements
Input voltage 110 to 127 VAC (+/- 10%), 60 Hz (+/- 2 Hz), 7 amp;
220 to 240 VAC (+/- 10%), 50 Hz (+/- 2 Hz), 4.0 amp
Power consumption
(active)
335 watts
Power consumption
(powersave)
0.6 watts
Power consumption
(standby)
3 watts
Power consumption
(off)
0.6 watts
Recommended
operating
temperature range
10 to 32.5º C
Recommended
humidity operating
range
20 to 80% RH
ENERGY STAR®
qualified
Yes
What's included
Warranty
1 Year Limited Warranty (Return to Company/Dealer - Unit Exchange)
---------------------------END---------------------------------------------------
52
53
TRAINING & PLACEMENT
Sl.No. Description
1
Desktop
2
Printer
Qty
02
01
Specification
i7, HP, IBM
Black-and-white printing, black-and-white
copying, black-and-white and colour scanning,
Print quality black (best)
Up to 600 x 600 dpi, Processor speed
230 MHz, Scan size (flatbed), maximum
21.6 x 29.7 cm, Copy speed (normal)
Black: Up to 14 cpm
Copy reduce / enlarge settings 25 to 400%
3
4
5
6
7
01
01
01
01
01
Make: Sony, EPSON,
EXIDE, PANASONIC
Make: Godrej
Make: Godrej
HP, DELL, IBM
LCD Projector
Inverter battery
Almirah&Book rack
Centre Table
Laptop
Professor & Head
Training & Placement
54
Sub: Repairing work of the college mini bus Vehicle No. WGV 2161 under the state plan head of A/C
2203
The following repairing works of the college mini bus are required to be done. List of items required for the
same are also given below.
Sl
no
1
2
3
Work / items
No of item
Thorough replacement / of the seats of college minibus WGV-2161
FoamRexin12 mm plywood
Dendrite/ adhesive
All other items if required for fitting of new seats including nuts and bolts.
Welding work or cutting work may be required for fitting of new seats
U- Rubbers
Rubber oil
All Labour charge and fitting charges inclusive
Fitting of water resistant bitumen cloth on the roof
Terfel – quantity as per requirement for complete the work
All Labour charge and fitting charges inclusive
Kingpin- both Left and Right side to be replaced by new materials.
Replacement of bush of leaf-spring by new materials and thorough greasing of leaf-springs
All Labour charge and fitting charges inclusive
Quantity-as
required for all
seats
Asim Mahapatra
Officer-In-Charge (Vehicle)
55
PURCHASE PROPOSAL
Sports & Athletics
Jalpaiguri Govt. Engg. College
STATE PLAN 0F 2015-16
UNDER THE HEAD “2203”
Name of the items
Specification
Quantity
1
Engine Oil
1 liter
2
3
4
Yonex Brand
NIKE
Cosco
Cosco
Standard Quality
Standard Quality
15 boxes
8
3
3
2pairs
2 pieces
Lotto standard quality
SS Standard Quality
32pieces
6 Pieces
13
TT board
TT Ball
Badminton
Racket
Shuttle(Feather)
Football
Volleyball
Basketball
Football Gloves
Cricket
individual bags
Sin Guard
Abdominal
guard
Cricket Ball1
Good quality for instruments
smoothness
Standard Quality
Stag Brand
Yonex Brand
SG tournament for duce
14
Cricket Ball2
SF for duce
15
16
Keeping Pad
Thigh guard
SG
SS
17
Cricket Bat1
18
Cricket Bat2
19
20
21
Batting Pad
Keeping Gloves
Keeping Gloves
BDM for duce tournament
purpose
SS Ton for duce tournament
purpose
SS(medium size)
SS
SS
25 pieces
of Red
6pieces of
White
1pair
3 right
hand and 1
left hand
2
Sl
No.
5
6
7
8
9
10
11
12
56
1
8 Boxes
20
2
3pair
2pair
2pair
Remarks
22
inner
Batting Gloves
23
Jersey Cricket
team
Standard DRY FIT
2pairs
right hand
& 1pair
Left hand
15 pieces
24
25
Football Net
Football
HORSE
Badminton Net
Volleyball Net
Standard Quality
Standard Quality
1pair
30 pieces
26
27
28
29
30
31
SS/SG
Standard Quality
Standard Quality Standard
Size
Window Curtain 5ft* 4ft
Skipping
Standard Quality Standard
Size
Jersey football
Standard DRY FIT
team
Football Cone
For bordering purpose
1
1
10pieces
4
15 pieces
30 pieces
(A.K.Mallick)
Officer-in Charge
Games & Sports
Jalpaiguri Govt. Engg. College
57
Govt. of West Bengal
Office of the Principal
Jalpaiguri Govt. Engg. College
To
The Principal
JGEC, Jalpaiguri.
Sub: Purchase, for Accounts Section & Cash Section, JGEC, Jalpaiguri from State Grant Fund( 2203)for the year
2015-16.
Ref: Office Memo No.1173 dated: 19/06/2015.
Sir,
In reference to the above noted subject the following procurements to be required in the Accounts Section &
Cash Section , JGEC, Jalpaiguri and the same may be purchased under State Grant (2203) for the F/Y 2015-16.
Sl
No
Nomenclature
of Items
Specification of Items
01
Desktop
Computer
Quantity
02.
Printer
HP 400G1, All-in-oneDesktop, Intel Pentium
with 22nm Technology .
Microsoft windows 8
L.B.P -3500-(Canon)
03.
Printer
L.B.P.-3000(Canon)
03 (three)
04.
Almirah
Make: Multinational
branded company.
Standard Size
04 (four)
02(two)
01(One)
Place of Delivery &
Installation if any/ Job.
Cash Section
&
Accounts Officers Room
Accounts
Section
Accounts
Section & Cash Section
Accounts Section & Cash
Section
Accounts Officer
Jalpaiguri Govt. Engg. College
Jalpaiguri
58
Govt. of West Bengal
Office of the Principal
Jalpaiguri Govt. Engg. College
To
The Principal
JGEC, Jalpaiguri.
Sub: Requisition of Purchase Computer for Accounts Section & Cash Section, JGEC, Jalpaiguri from State Grant
Fund( 2203)for the year 2014-15.
Ref: Office Order No.29 dated: 19/07/2014.
Sir,
In reference to the above noted subject the following computer to be required to procure in the Accounts Section
& Cash Section , JGEC, Jalpaiguri under State Grant (2203) for the F/Y 2014-15.
Sl
No
Nomenclature
of Items
Specification of Items
01.
Desktop
Computer
Windows 8
RAM- 4 GB
Hard Drive Capacity-500
GB
Make: Multinational
branded company
Quantity
No of
article
placed Buy
Back offer
Place of
Delivery &
Installation
if any/ Job.
05(Two)
4 Nos.
Accounts
Section
Accounts Officer
Jalpaiguri Govt. Engg. College
Jalpaiguri
59
GOVT OF WEST BENGAL
Health Centre, Jal Govt Engg College, Jalpaiguri.
Proposals under State Plan Head—2203 of Collegiate Health Centre for covering Budget
provision of the financial year 2015—2016.
Name of the items with specification .
Quantity
1) Than Gauze (Branded quality)
: 50 thans
2) Rolled Bandage ( ,,
,,
)
:50 Packs
3) Spirit
( Bengal )
:20 bottles
4) Crepe bandage ( 4 inchs, best quality)
:250 pcs
5) Liquid Phenyl (500ml,
,,
,, )
:50 bottles
6) Bleaching powder(500gm ,,
,, )
:50 pkts
7) Crepe Bandage(4 inchs, Jhon. & Jhon. )
:150 pkts
8) All out liquidators(only liq.)
:20 pcs
9) Aquaguard repairing works(Eureka Forbes)
:1pcs
10) Stethoscope( Litt man”s)
:2 pcs
11) Sphygmomanometre (watch Type,Best Quality)
:3 pcs
12) Sphygmomanometre(automatic,Dr.Morphen-Home Health)
:1pcs
13) Bands/pup of Sphygmomanometre(automatic,
Dr.Morphen-Home Health)
:3 pcs
14) UPS for Computer( Best Quality)
:1 pcs
15) Rechargeable Battery(AA size,1000mAh)
:8 pcs
16) AA size Battery Charger ( Best Quality)
:1 pcs
Medical Officer
Health Centre, Jal Govt Engg College, Jalpaiguri.
60
JALPAIGURI GOVT. ENGINEERING COLLEGE
ALL HOSTELS
Financial Year 2015-16
Note: Required All Rates including Vat, with Vat Number.
ITEAM
DESCRIPTION
Rate Required
Require
ments
Per Pc
6
6'6''x3'6''x2' Height Steel Cot With Legs And Top Frame Of
40mmx40mmx6mm Angle Section, 3 Nos Direction Of Width
With 25 Mmx8mm Plates, Top Made Of 52mm
Plywood(Bhutan Made), Top Sheet Be Welded With The Frame
And Middle Supports And Painted.
Steel Table Size 2'6"X2'x2'6'' Height With Legs,
Top Frame & Foot Rest Made Of 40mmx40mmx40mm Angle
Section, One Middle Support On Top In The Direction Of
Width With25mmx8mmplate, Top Made Of 18 Gauge Steel
Sheet Without Any Joint. All Joints Will
Be Welded With Frame And Middle Supports & Painted.
Per Pc
18
Per Pc
33
Wooden Cot: 6'6''x7'x3'x1'6'' (Height) Legs: 4nos. (3''x3''x1'6''
Height), Passi-3''x2'', Dosa- 2''x2'x2' Made Of Sal Wood, Planks
On Top Neem/ Hard Wood, Cost Of Materials And Carrying
Making Charge.
3'x2.5' Wooden Table Made Of 2"X2"X2.5’ Wooden,
Passi 3’x1’, All made by Saal Wood-Frame+Top.
Per Pc
10
Per Pc
1
FURNITURES
6'6''x3'6''x2' Height Steel Cot With Legs And Top Frame Of
40mmx40mmx6mm Angle Section, 3 Nos Direction Of Width
With 25 Mmx8mm Plates, Top Made Of 18 Gauge Steel Sheet
Without Any Joint, Top Sheet Be Welded With The Frame And
Middle Supports And Painted.
1
STEEL COT
2
STEEL COT WITH
PLY WOOD TOP
3
STEEL TABLE
4
WOODEN COT
5
WOODEN TABLE
6
WOODEN BENCH
8'x1' Standard, 6 (Six)Legs Supports Made Of 2"X2"X2’
Wooden, Passi 3’x1’, All Made By Saal Wood.
Per Pc
17
IRON BENCH
8'x1' Standard, 6(Six) Legs Supports Made Of 2"X2"X2’ White
Iron(Gi), Iron Frame (Top) 52mm Ply(Bhutan Made) , Passi
1’x1’’,(White Steel ) (Gi)
Per Pc
10
8
DINING
TABLE(8'X4')
Dining Table 8'X4', Top Made By Finished/ polished Granite
Sheet With(thickness 1”) Six Legs Of 4''x4''x4", One Middle
Support On Top & Foot Rest Made Of 2"X2"X3" - All Made
With Saal Wood. All Made Of Shal Wood.
Per Pc
2
9
PLASTIC CHAIR
Moulded Plastic Chair Without Arms Preferably Neelkamal/
Cello
Per Pc
45
Per Pc
4
7
UTENSILES
10
BRASS HANDI
Brass Make- Wide Mouth Handi (24''-Outer Diameter), Kg
Height 18", Weight 18 Kg(Approx)
61
11
JHAJRA
Aluminium Make Jhajra Handi With Handle,
Full Hole. 30" Face Diameter.
Per Pc
1
12
STEEL PLATE
Steel Dish, Ss Partition, Rounded, Large Size
(More Than 14")
Per Pc
200
13
STEEL PLATE
Steel Dish, Ss Partition, Large Size
(More Than 14") (Khandan)
14
IRON PETA KADAI
Iron Peta Kadai, More Than 30", Weight 20 Kg(Approx)
Per Pc
4
15
JUG
Steel Jug, Standard Size, Jindal/ Vinu Make, -Capacity 2lts
Per Pc
37
16
Aluminium Dekchi
With Lid (Saspan)
Aluminium Dekchi With Lid (Saspan 65cm (26") 10g,
Per Pc
6
17
ALUMINIUM
DEKCHI
ALUMINIUM
GAMLA
Aluminium Dekchi, 90cm (36") 10g,
Per Pc
1
Aluminium Gamla, 65cm (26") 10g,
Per Pc
7
Aluminium Gamla, 90cm (36") 10g,
Steel, Gamla, 65 cm (26")
Steel Gamla, 90 cm (36")
Aluminium Medium Size
Aluminium Big Size
Big Size - Iron-4ft
Medium Size-Iron-2.5ft
Big Size - Iron-4ft/ 2.5 Ft
Aluminium- Standard-For Serving
10 Litres- Prestige/Singer
Per Pc
Per Pc
Per Pc
Per Pc
Per Pc
Per Pc
Per Pc
Per Pc
Per Pc
Per Pc
4
9
2
8
6
2
4
6
6
2
29
Aluminium Gamla
STEEL GAMLA
STEEL GAMLA
ROUND HATA
LONG HATA
KHUNTI
KHUNTI
JHAJRA HATA
BUCKET
PRESSURE
COOKER
PARAT
Per Pc
3
30
31
WATER PURIFRE
WATER PURIFRE
Aluminium Peta , Radies : 65 Cm (26’’), Height:3’’
Other Equipments
Uv System Isi/Iso Standard- Domestic With Installation
Uv System Isi/Iso Standard- Industrial Model
Water Flow Rate 600lph (600 Lt Per Hour) Industrial Model
With Installation
Per Pc
Per Pc
2
3
32
33
TV
FRIDGE
Lcd 32"- With Installation-Samsung/ Sony
360 Lt : Double Door-Heavy Duty- Isi/Iso Standard- With
Installation Godrej
Per Pc
Per Pc
1
1
34
MIXER-GRINDER
Per Pc
4
35
WEIGHT
MACHINE
INVERTER WITH
TUBULAR
BATTERYPLASTIC DUSTBIN
1400 Wt (Big Size)-Heavy Duty- Isi/Iso Standard- With
Installation Bajaj/ Prestige
Digital Weight Machine : Up To 0-200 Kg For Goods Weight
Per Pc
1
18
19
20
21
22
23
24
25
26
27
28
36
37
90
1400 V A , For Three Hours Constant Running Low
Maintenance Tubular Battery- Sukam/ Limunious
TTAKI, ONE HUNDRED (100) LT. CAPACITY
1
Per Pc
Sri Vivekananda Biswas
Assistant Proctor
Jalpaiguri Govt. Engg. College
62
12
JALPAIGURI GOVERNMENT ENGINEERING COLLEGE
Jalpaiguri
Students Amenities
Financial Year, 2015-16
NOTE: REQUIRED ALL RATE INCLIDING VAT WITH VAT NO.
Sl.
No.
1
2.
3.
Item
Specifications
Quantity
Aluminum Staircase
Bosch Power Toolkit
Music System
12 ft
1
1
1
4.
Canon DSLR Camera
EOS 700D, Double zoom ,(EF S18-55 mm IS II
& EF 555-250mm II);DSLR
1
5.
6.
Sony Tripod
Sandisk Memory Card
VCT-R640
SDHC – 32 GB, Upto 40 Mbps, Class 10
1
2
7.
8.
Sony Camcorder
Nikon Lens
1
1
9.
Printer – Laser (All-in-one)
HDR- CX405 Camcorder
AF-S DX Nikkor 35mm
f/1.8G
HP-Officejet Pro 3260
Black and white
10.
Hard Disk
4
11.
12.
13.
Pen-drive
Ahuja Sound system
(Complete set)
Brass Section
Seagate Expansion Falwn
1TB
Sandisk Cruzerblade 16GB
i) Ride Cymbal (Paiste 101 series 20”)
ii) Hi-Hat (Paiste 101 series 14”)
iii) Crash Cymbal (Paiste 18”)
1
14.
15.
16.
17.
18.
19.
Bass Guitar
Acoustic Guitar
Floo Tom
Guitar Stands
Lyrics Holder Stand
Drum Screens
Fender Squier Bass guitar
Hertz – Pluto HW 39-C-201
Pearl Forum Floor Tom FZH1414F
Especo SP700
Warner MS02 Music Stand
i) Snare (14”) - Evans
ii) Tom (12,13,16 “) - Evans
iii) Bass Drum - Evans
1
1
20.
21.
Drum Sticks
Vic Firth
Two Microphones with complete set, model no.
must be quoted.
4
22.
Ahuja Professional Vhf Wireless
Microphone
Ahuja Professional Vhf Wireless Microphone Awm490v2
2
Conference System..Ahuja
Sony make
SA-D100
Speaker system
63
4
6
2
2
1
1
2
Sri Vivekananda Biswas
Assistant Proctor
Jalpaiguri Govt. Engg. College
Jalpaiguri-735102
64
JALPAIGURI GOVERNMENT ENGINEERING COLLEGE
Jalpaiguri
Proctorial Section
Financial Year, 2015-16
NOTE: REQUIRED ALL RATE INCLIDING VAT, WITH VAT NO.
Sl No.
Name of the Item
Laptop
1.
2.
3.
Scanner
HP Scanjet pro 3000s2 Sheet –feed Scanner
Scanner
HP Scanjet Enterprise7000s2
Surveillance System
Requirements
1
1
1
5.
Monitor
Four Camera with all Setup and
installation(Model No. and warranty must quoted
by Agency
18.5'' LED HP
6.
Drawer Almirah
Office Standard
2
Three Users for Three Years- Quick Heal
Three Users for One Year- Quick Heal
Two Microphones with complete set, model no.
must be quoted.
Office Standard Big Size
Office Standard Medium Size
Front Tech 5mt
Office Standard
Office Steel Almirah with locker Standard Size
Big and Medium Size Standard
1
1
Ahuja Professional Vhf Wireless Microphone Awm-490v2
1
Maintenance Yearly
1.5 tons L.G. with all fittings and Installation
model No and Warranty must be quoted by the
Agency
For the Assistant Proctor’s Chamber, requirement
two doors and five windows with Steel frame and
glasses/Fiber Sheet with all fittings and
installation.
1
4.
Anti Virus
8.
Anti Virus
Conference System..Ahuja
9.
7.
10.
11.
12.
13.
14.
15.
Steel Rack
Steel Rack
External Cord Electrical
Drawer Almirah
Almirah
Inverter Box
16.
Ahuja Professional Vhf Wireless
Microphone
17.
Aquaguard Maintenance
18.
A.C Machine
19.
A.C Machine Room Fittings
20.
Domain Hosting
21. Sandisk Memory Card
22
Specification (Preferences/ By Make/ Company)
Intel Core i7 4th Generation processor, 1TB hard disk, 4 GB
DDR3 RAM, DVDRW Combo, 15.6" LED, ATI Readon
Graphics (1 GB). OS: Windows 8(original) Manufactured by
HP/Lenovo.
Revolving Chair
1
1
1
1
1
2
1
1
2
1
1
Making Website in the name of Proctorial Section, JGEC,
uploading necessaries up to 1 GB, thee email id, for three
years, maintenance, security, uploading required
directed by Assistant proctor.
1
SDHC – 64 GB, Upto 40 Mbps, Class 10
Godrej: Office Standard: Model must be quoted
2
1
65
Sri Vivekananda Biswas
Assistant Proctor
Jalpaiguri Govt. Engg. College
Jalpaiguri-735102
66
INVITATION FOR QUOTATIONS FOR SUPPLY OF GOODS
UNDER STATE PLAN 2015-16
To
_______________________
Sub : INVITATION FOR QUOTATIONS FOR SUPPLY OF EQUIPMENTS/GOODS OF
ENGINEERING DEPARTMENT
Dear Sir,
ELECTRICAL
You are invited to submit your most competitive quotation for the following goods:EQUIPMENTS:
Item Brief Description of the goods
No
Specifica
tion
Qty.
Delivery
Period /
Job duration
30 days from
the date of
placing order
--do--do-
E1.
General Purpose CRO
As
annexed
2(Two)
E2.
E3.
Single Phase Variac
Desauty’s Bridge
Suitable for
measurement of capacitance
Wien Bridge , Suitable for measurement
of frequency, complete with all
accessories like Head phone , Null
Detector etc.
Andersons Bridge
Suitable for measurement of Inductance,
complete will all accessories like inbuilt
Oscillators , Null Detector etc.
Schering Bridge for measurement of
unknown value of lossy capacitor
Analog IC Tester:
Electrodynamometer Type Wattmeter
(unity power factor)
--do--do-
2(Two)
8085 –Trainer kit
UPS
Tachometer
Earth/Ground
Resistance
&
Soil
Resistivity Testers
E13. Multi-meter
E14. Battery for Inverters
E15. Battery for UPS at Server Room
E16. Split Air-Conditioner With Rotary
Compressor (R22 Refrigerant)
REPAIRING AND MAINTENANCE:
RM1. Maintenance of Electrical Machine Lab
RM2. Maintenance of RO Filter
E4.
E5.
E6.
E7.
E8.
E9.
E10.
E11.
E12.
--do-
2(Two)
2(Two)
--do-
Installation
Requirement
,
if any
Yes
Yes
Yes
--do-
Yes
2(Two)
--do-
Yes
--do-
2(Two)
--do-
Yes
--do--do-
--do--do-
Yes
Yes
--do--do--do--do-
1(One)
i)2(Two)
ii)2(Two)
iii)2(Two)
06(six)
2(Two)
2(Two)
02 No.
--do--do--do--do-
Yes
Yes
Yes
Yes
--do--do--do--do-
01 No.
04 nos.
04 nos.
09 No.
--do--do--do--do-
Yes
Yes
Yes
Yes
67
Annexure
Item Name and Specification of the Equipments:
Serial
No.
E1.
Item
Specification
General Purpose CRO
E2.
Single Phase Variac
E3.
Desauty’s
Bridge
Suitable for measurement of
capacitance
E4.
Wien Bridge , Suitable for
measurement of frequency,
complete with all accessories
like Head phone , Null
Detector etc.
Andersons Bridge
Suitable for measurement of
Inductance , complete will
all accessories like inbuilt
Oscillators , Null Detector
etc.
Schering
Bridge
for
measurement of unknown
value of lossy capacitor
Bandwidth
: 50MHz
No. of channel
:2 channel
Vertical sensitivity
:1mV/div to 20V/div
Horizontal sensitivity :0.05S/div.To 0.5S/div.
Hold Off Time
:variable
Input Power
:230V.AC 10%, 1 ph. 50Hz
Accessories :2x1:1/1:10 switchable probes,BNC -Crocodile Cable,
BNC Test Prod cable, Test Leads, mains chord, manual.
Input: 240 v, 1-phase, 50Hz, 15 A( at least)
Output: 0-270V
To determine the unknown value of capacitance, Cx=R2C1/R3
i)Built
in
AF
oscillator
with
1KHz
frequency.
ii)Built in head phone and
null detector outputs.
iii)Different values of capacitors to observe different outputs
Range :- 100Hz to 100KHz or better
Accuracy:- 0.1% or better.
Detector:- i) Head Phone.
ii) 31/2 digit null detector
E5.
E6.
E7.
Analog IC Tester:
E8.
Electrodynamometer
Wattmeter
(unity power factor)
E9.
E10.
UPS
8085 –Trainer kit
Suitable for Laboratory useThe bridge should consist of
I)
Three or more unknown inductance.
II)
Two or more fixed standard capacitor .
III)
31/2 digit null detector.
iv)
Provision for for AC and DC balance
Suitable for Laboratory useThe bridge should consist of
i)Built
in
AF
Oscillator
with
1KHz
frequency.
ii)Built
in
speaker
and
detector
outputs.
iii)Variable values of standard capacitors to observe different outputs
The list includes Op-amp, voltage comparators, transistors
arrays, optocouplers, analog switches, voltage followers, timers, A
to D converters, D to A converters, and miscellaneous analog ICs .

16 character X2 line LCD dot matrix display 24 key keyboard
for man to machine communication and easy operation.

Single step mode facility.

Self test facility to test internal modules of IC tester
automatically at power on and through “self test” key of the
keyboard.
Audio alarm to user whenever required.
Type i)VC :150/300/600 volts, CC- 5/10 Amps,
ii) VC :75/150/300 volts, CC- 2.5/5 Amps
iii) VC :150/300/600 volts, CC- 10/20 Amps,
Accuracy better than 0.5%
600 VA UPS for 15 minutes back up
8085Trainer kit with following items:
i) Power supply unit:I/P: 230 v at 50 Hz,
O/P: +5V, 2.5A, +/- 12V for kit, & ADC-DAC interfacing units.
ii) 32KB SRAM (with battery back-up) & EPROM(at least 16KB),
upgradable
68 up to 64KB(future provision for up gradation).

iii) 48 TTL I/O(parallel) lines using two 8255 terminated
properly in 26 pin headers for necessary interfacing purpose.
iv) 16bit timer/counter(3 channel unit).
v) Serial port using 8251, 8259, along with RS-232 cable (9 pin
female to 9pin male)and suitable software support for
program/data uploading & downloading from host(PC) to
target system(kit) & to edit program/data, debugging and
execution (including all necessary conventional commands)
from the host(PC) Key board .
vi) 16 character 2 Line LCD display
vii) External IBM(PC )Compatible Keyboard
All(8)interrupts lines from internal external sources
viii)Powerful User friendly Monitor Software support(two pass
cross assembler) with
system commands to edit
program/data, debugging and execution from the system
keyboard, including single line assembler/disassemble, Key
board commands (that include all necessary conventional
commands and serial commands, to send/receive files to/from
PC)
viii)
All Address, Data & Control signals, are buffered &
terminated in 50 pin header for interfacing.
ix) On Board LED indicator as Power ON indication.
x) Provision for Programmable Interrupt controller using 8259 .
xi) ADC-DAC interface card: (Optional)
a)8 bit and 8 channel ADC. This has to be interfaced through
one of the 8255. The conversion rate is =/<100 microseconds.
Input voltage range is 0 to 5V.
b)This unit shall interface two DAC's channels (8bit each).
Output voltage range 0 to 5V shall be available in the unit in
addition to output amplifiers to provide unipolar or bipolar
voltage features.
xii) The Trainer kit shall be supplied complete in all respect along
with proper hardware & software support(CD for the crossassembler/software support), documentation ( Tech.
manual containing all necessary tech. details and & User
manual/student workbook for learning different features of kit
with typical sample programs). Required data cables,26 pin &
50 pin FRQ cables, data extension board, screw, and
connectors for all male connections of the kit shall be available
along with the kit, including power supply units also.
xiii)Product catalogue for tech details to be provided
with tender documents.
xiv)The system shall be properly installed and
demonstrated by the suppliers technical persons.
E11.
Tacho-meter
Digital type with resolution 0.5 rpm or better , accuracy 0.2% or
better. Contact/Proximity type, 0-3000 rpm.
Product catalogue for tech details to be provided with tender documents.
Each Trainer kit shall be supplied complete in all respect along with documentation ( Tech. manual
containing all necessary tech. details &Student workbook ).The system shall be properly installed and
69
demonstrated by the suppliers technical persons.
Serial
No.
E12
Item
Specification
Earth/Ground Resistance & Detailed Specifications
Soil Resistivity Testers
Memory: Internal memory storage up to 1500 records accessible via
USB port
Measuring function: Interference voltage and frequency, earthing
resistance 3- and 4-pole with/without clip-on current transformer,
resistance 2-pole with ac, 2- and 4-pole with dc
Display: 4 digit (2999 Digit) - 7 segment liquid crystal display, with
improved visibility
Operation: Central rotary switch and function keys
Temperature Range:
Operating temperature:-10 °C to 50 °C (14 °F to 122 °F)
Storage temperature:-30 °C to 60 °C (-22 °F to 140 °F)
Temperature coefficient:± 0.1 % of reading/°C <18 °C >28 °C
Type of protection: IP56 for case, IP40 for battery door according
to EN60529
Max voltage: Warning – socket "clamp" to socket E, ES, S or H
Urms = 0 V
Sockets E, ES, S or H to each other in any combination, max. Urms =
250 V (pertains to misuse)
Safety: Protection by double and/or reinforced insulation. Max. 50 V
to earth per IEC61010-1. 300V CAT II, Pollution degree 2
Quality standard: Developed, designed and manufactured to
comply with DIN ISO 9001
External field influence: Complies with DIN 43780 (8/76)
Auxiliary power: 6 x 1.5 V alkaline (IEC LR6 or type AA)
Battery life span: With IEC LR6/type AA: typ. 3,000
measurements (RE+RH ≤ 1 kΩ)
With IEC LR6/type AA: typ. 6,000 measurements (RE + RH > 10 kΩ)
Dimensions (WxHxD)
250 mm x 133 mm x 187 mm (9.75 in x 5.25 in x 7.35 in)
Weight
≤ 1.1 kg (2.43 lb) without accessories 7.6 kg (16.8 lb) incl. accessories
and batteries in carrying case
Case material: Polyester
Measurement of Interference Voltage dc + ac (UST)
Measuring limits of error: method: Full wave rectification
Measuring range: 1 V to 50 V
Display range: 0.0 V to 50 V
Resolution: 0.1 V
Frequency range: dc/ac 45 Hz to 400 Hz sine
Accuracy± (5 % of rdg + 5 digit)
Measuring sequence : Approx. 4 measurements/s
Internal resistance : Approx. 1.5 MΩ
Max. overload: Urms = 250 V
Measurement of Interference Frequency (F )
Measuring limits of error: method
Measurement of oscillation period of the interference voltage
Measuring range : 6.0 Hz to 400 Hz
Display range: 16.0 Hz to 299.9 Hz to 999 Hz
Resolution : 0.1 Hz to 1 Hz
70
Serial
No.
Item
Specification
Range : 1 V to 50 V
Accuracy : ± (1 % of rdg + 2 digit)
Earthing Resistance (RE)
Measuring method: Current and voltage measurement with probe
as IEC61557-5
Open circuit voltage: 20/48 V, ac
Short circuit current: 250 mA ac
Measuring frequency: 94, 105, 111, 128 Hz selected manually or
automatic. (AFC) 55 Hz in function R*
Noise rejection: 120 dB (16 2/3 , 50 , 60, 400 Hz)
Max. overload: Urms = 250 V
Switch position
RA 4-pole (two clamp Stakeless)
Resolution
0.001 Ω to 0.1 Ω
Measuring range 0.02 Ω to 199.9 Ω
Accuracy ± (7 % rdg + 3 digit)
Operating error ± (10 % rdg + 5 digit)
Measuring voltage Vm = 48 V ac (primary)
Measuring frequency 128 Hz
Noise current (IEXT)
Max. IEXT = 10 A (ac) (RA < 20 Ω)
Max. IEXT = 2 A (ac) (RA > 20 Ω)
Meter has to be supplied along with valid calibration
certificate issued by NABL accreditated Testing Laboratory
and should have the validity more than one year as on the
date of delivery/ installation.
E13
Multimeter
Handheld Multimeter -3.5 Digits, True RMS, 4000 counts, Battery
operated
Min. Accuracy
1. Counts
4,000
2. AC
600 V
1%
3. DC
600 V
0.1%
4. AC
10 A
1.5%
5. DC
10 A
1.5%
6. Resistence 40 MegaOhms 1%
7. Frequency 50 Kilo Hertz
0.1%
8. Capacitance 1 micro F to 200 micro F 2.5%
9. Safety Category 2 600 V of IEC 61010.
10. Instrument Safety Overload fuse protection
11.Temperature -40 degC to 400 Deg.C 2%
E14
Battery for Inverters
12V, 160 Ah or more, tubular, warranty 4year or more.
E15
Battery for UPS at Server 12V, 160 Ah or more, tubular, warranty 4year or more.
Room
Split Air-Conditioner
Main Specification:
With Rotary Compressor
(R22 Refrigerant)
Nominal Cooling Capacity (kcal/hr) in (KW): 4500 (5.2),Min. Room Air
Flow (cub.m/h): 700, EER (W/W): 3.50 Min., BEE Star Rating: 5
E16
Other Specification:
71
Serial
No.
Item
Specification
1. Air conditioners suitable for 230V, 50 Hz single phase AC supply
shall be capable of performing the functions as cooling,
dehumidifying, air circulating and filtering. The Air conditioners may
either be provided with adjustable step less type mechanical
thermostat or electronic thermostat as per IS: 11338:1985.
2. Outdoor unit of the air conditioners shall be fitted discharge cooled
type rotary/sroll type compressor operating on Refrigerant R-22 (or
non-CFC refrigerant R-410A in case of Split Air Conditioner) with
suitably rated capacitor start electric motor. It shall be equipped with
overload protection and shall be mounted on resilient mountings for
quiet operation. The Rotary compressor shall be of Matsushita/
Hitachi/ Toshiba/ Carrier/ Emerson/ LG /Tecumseh make and shall
be covered by manufacturers test certificate and TTC to JISS or
ASHRAE.
3. Remote cordless control with LCD/LED Display shall be provided
with one On/Off timer, selecting fan speed (three speed) and setting
up of temperature. Display shall be provided on indoor unit or on
handset or on both.
4. Air conditioners shall be provided with standard 5 mtrs refrigerent
Cu pipe, electrical wire and drainage pipe.
5. Servicing: Free servicing shall be provided for 15 months from the
date of dispatch or 12 months from the date of installation of air
conditioner whichever is earlier. Firm is also required to send service
engineer at least 3 times during the warranty period.
6. Warrantee: Warrantees shall be provided for 15 months from the
date of dispatch or 12 months from the date of installation of air
conditioner, whichever is earlier.
8. Installation: Quoted price will be inclusive of charges for
installation and the installation shall include the following work:i) Mounting/Fitting indoor and outdoor units at the respective
locations.
ii) Laying refrigerant piping of required length and connecting both
the units after drilling hole/holes in the wall, if required.
iii) Leak testing of the entire system.
iv) Charging Refrigerant gas in the unit.
v) Suitable electric wiring between indoors and outdoors units of
required length up to switch at location of indoor unit. Switches/
Sockets /Plugs are not included in the scope of supply.
9. Inspection: - Pre-dispatch inspection of stores against the R/C shall
be reported as per Inspection Report Performa No.MECH-238
(Rev.III) (Attached).
ANNEXURE
Installation for Split Air Conditioner Split Air-Conditioner With
Rotary Compressor(R22 Refrigerant)
Specification :
The scope of installation shall include installation at consignee's site
as per GTR.
Specification :Split type air conditioners with BEE Star rating label & rating capacity
conforming to IS: 1391(Part-2)-1992 with amdts No.1 to 4 fitted with
rotary compressor suitable for using HCFC refrigerant (R-22) for wall
mounting .
72
All Bidders are to submit Original Dealership Certificate and Warranty Certificate, both to be issued by the
Manufacturers of the each of the quoted items. They also have to clearly mention the Make and Model No. of the
each of the Quoted items alongwith the original printed literatures of the manufacturers.
Repair &Maintenance
Sl No
RM1
Description of the work
Details
Maintenance of Electrical Following
Machine Lab
are
to
repaired:
M/c-01
Service
M/-02
All sets are to be Within
one
made operable month of placing
with necessary work Order
parts/Spares
M/c-03
M/c-04
Prospective
Bidders may visit
the set-up at
Electrical
Machine Lab and
note the actual
condition of the
setup so that
submit the bid
effectively.
M/c-05
M/c-40
M/c-41
RM2
Duration
Sets
be
Maintenance of RO Filter
73