WORLD TRADE G/TBT/N/MYS/26 XX November 2011 ORGANIZATION (07-0481) Committee on Technical Barriers to Trade Original: English NOTIFICATION The following notification is being circulated in accordance with Article 10.6. 1. Member to Agreement notifying: MALAYSIA If applicable, name of local government involved (Articles 3.2 and 7.2): 2. Agency responsible: Ministry of International Trade and Industry Block 10, Kompleks Kerajaan Jalan Duta 50622 Kuala Lumpur, Malaysia Tel: (+603) 6203 3022 Fax: (+603) 6203 2337 Website: http://www.miti.gov.my Name and address (including telephone and fax numbers, e-mail and web-site addresses, if available) of agency or authority designated to handle comments regarding the notification shall be indicated if different from above: 3. Notified under Article 2.9.2 [ X ], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ], other: 4. Products covered (HS or CCCN where applicable, otherwise national tariff heading. ICS numbers may be provided in addition, where applicable): Aluminium products (HS Codes: 7606 11 000, 7606 12 000, 7606 91 000, 7606 92 000, 7607 11 000 and 7607 19 000) (Details in Annex 1) 5. Title, number of pages and language(s) of the notified document: Customs (Prohibition of Imports) (Amendment) (No. 3) Order 2011 (1page, English) 6. Description of content: Customs Act 1967, Customs (Prohibition of Imports) (Amendment) (No. 3) Order 2011 The Customs (Prohibition of Imports) Order 2008 [P.U.(A) 86/2008] is amended in Part II of the Fourth Schedule, by inserting after item 9. The amendment to the Order specifies that the import of aluminium products (as stated in 4) shall be accompanied by a certificate of approval or a letter of exemption issued by or on behalf of Chief Executive Officer of the Construction Industry Development Board (CIDB) for the construction sector or SIRIM for non construction sector. The detailed information on certificate of approval or a letter of exemption for the importation of aluminium products is available at: http://www.cidb.gov.my/v6/?q=en/content/168 http://www.sirim-qas.com.my The approval of the products is based on the compliance to identified standards (as in Annex 1). 7. Objective and rationale, including the nature of urgent problems where applicable: To ensure raw materials in end products meet the quality and safety requirements, consumer’s health and safety as well as prevention of deceptive practices. 8. Relevant documents: 1) Customs (Prohibition of Imports) (Amendment) (No. 3) Order 2011 (1page, English) 2) MS 2040:2007, Aluminium and aluminium alloys – Sheets and coiled sheets Specification (57 pages, English) 3) MS 1848:2005, Aluminium and aluminium alloys – Foils (10 pages, English) 1 November 2011 1 November 2011 9. Proposed date of adoption : Proposed date of entry into force : 10. Final date for comments: - 11. Texts available from: [X] National enquiry point or address, telephone and fax numbers, e-mail and web-site addresses, if available of the other body. The Malaysian Standards can be purchased from: i) Sales and Promotion Services Section Standards Research and Management Centre SIRIM Berhad No. 1, Persiaran Dato’ Menteri Section 2, 40911 Shah Alam Selangor, MALAYSIA Tel.: (+603) 5544 6102/ 6118 Fax : (+603) 5544 6114/ 6146 Email: msonline@sirim.my ii) Department of Standards Malaysia Ministry of Science, Technology and Innovation Malaysia (MOSTI) Century Square, Level 1 & 2, Block 2300 Jalan Usahawan, 63000 Cyberjaya, Selangor Tel: (+603) 8318 0002 Fax: (+603) 8319 3131 Email: central@standardsmalaysia.gov.my Website: www.standardsmalaysia.gov.my The Malaysian Standards are also available online at: http://www.msonline.gov.my ANNEX 1 IMPLEMENTATION OF MANDATORY STANDARDS ON ALUMINIUM PRODUCTS No. HS Code Product Description 1. HS 7606 11 000 Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm, rectangular (include square), whether or not alloyed 2. HS 7606 12 000 3. HS 7606 91 000 4. HS 7606 92 000 5. HS 7607 11 000 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm, not backed: rolled but not further worked 6. HS 7607 19 000 Other aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm, not backed Malaysian Standard Applied MS 2040:2007 Other aluminium plates, sheets & strips, of a thickness exceeding 0.2 mm, whether or not alloyed MS 1848:2005