PRODUCT:
Demountable acoustic ceiling in visible, but flush, grid system
with square 3.5x3.5 mm holes, c/c 8.33 mm
MATERIAL
Material:
Perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 12.5
Edge:
A+, with milled groove at the edge of the tile so the tile and
section are flush
Perforation: Square 3.5x3.5mm holes, c/c 8.33 mm
Perforation to edge
Perforation percent:
17.2 %
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Recessed grid system
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger in direction of load-bearing section ≤ 400 mm.
 Distance between load-bearing sections ≤ 1200 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Screw spacing for attachment of edge section: max. 300mm c/c
 Light sockets of up to 3.0 kg can be integrated directly into the ceiling tiles. In the case of heavier
fittings, loads must be taken up directly by the concrete deck or via the grid system and extra
hangers.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.50
0.80
0.85
0.75
0.75
0.80
αw: 0.80
Light reflection in accordance with DIN 5036:
69.2%
Interior climate:
Degasification: 10 days
Particle emission: Low
PRODUCT:
Demountable acoustic ceiling in visible, but flush, grid system
with round holes in 4 different diameters: Ø5, Ø8, Ø15 and Ø20 mm
in a “random” pattern.
MATERIAL
Material:
Perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 12.5
Edge:
A+, with milled groove at the edge of the tile so the tile and
section are flush
Perforation: Round holes, Ø5, Ø8, Ø15 and Ø20 mm
Perforation to edge.
Perforation percent:
10.8 %
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Recessed grid system
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger in direction of load-bearing section ≤ 400 mm.
 Distance between load-bearing sections ≤ 1200 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Screw spacing for attachment of edge section: max. 300mm c/c
 Light sockets of up to 3.0 kg can be integrated directly into the ceiling tiles. In the case of heavier
fittings, loads must be taken up directly by the concrete deck or via the grid system and extra
hangers.
.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.40
0.55
0.60
0.60
0.50
0.50
αw: 0.60
Light reflection in accordance with DIN 5036:
72.2%
Interior climate:
Degasification: 10 days
Particle emission: Low
PRODUCT:
Demountable acoustic ceiling in visible grid system
with oval 4x14 mm holes, c/c 10/20 mm
MATERIAL
Material:
Perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 9.5 mm OR
600 x 1200 x 9.5 mm OR
600 x 600 x 12.5 mm OR
600 x 1200 x 12.5 mm
Edge:
A, visible grid system
Perforation: Oval 4x14 mm holes, c/c 10/20 mm
Perforation percent:
21.3 %
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Visible grid system
 Distance between load-bearing sections c/c 1200 / 600 mm.
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger ≤ 400 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Location of edge section: Lower edge of edge section = lower edge of finished ceiling.
 Screw spacing for attachment of edge section: max. 300mm c/c
 In the case of fittings, loads must be taken up directly by the concrete deck or via the grid system
and extra hangers.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.35
0.60
0.80
0.70
0.75
0.80
αw: 0.75
Light reflection in accordance with DIN 5036:
70.9%
Interior climate:
Degasification: 10 days
Particle emission: Low
PRODUCT:
Demountable acoustic ceiling in visible grid system
with square 3x3 mm holes, c/c 8.33 mm
MATERIAL
Material:
Perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 9.5 mm OR
600 x 1200 x 9.5 mm OR
600 x 600 x 12.5 mm OR
600 x 1200 x 12.5 mm
Edge:
A, visible grid system
Perforation: Square 3x3 mm holes, c/c 8.33 mm
Perforation percent:
10.2 %
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Visible grid system
 Distance between load-bearing sections c/c 1200 / 600 mm.
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger ≤ 400 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Location of edge section: Lower edge of edge section = lower edge of finished ceiling.
 Screw spacing for attachment of edge section: max. 300mm c/c
 Light sockets of up to 3.0 kg can be integrated directly into 600x600 mm ceiling tiles. In the case of
600x1200 mm ceiling tiles or heavier fittings, loads must be taken up directly by the concrete deck or
via the grid system and extra hangers.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.40
0.55
0.65
0.60
0.60
0.55
αw: 0.65
Light reflection in accordance with DIN 5036:
72.1 %
Interior climate:
Degasification: 10 days
Particle emission: Low
PRODUCT:
Demountable acoustic ceiling in visible grid system
with square 12x12 mm holes, c/c 30 mm
MATERIAL
Material:
Perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 9.5 mm OR
600 x 1200 x 9.5 mm OR
600 x 600 x 12.5 mm OR
600 x 1200 x 12.5 mm
Edge:
A, visible grid system
Perforation: Square 12x12 mm holes, c/c 30 mm
Perforation percent:
13.0 %
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Visible grid system
 Distance between load-bearing sections c/c 1200 / 600 mm.
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger ≤ 400 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Location of edge section: Lower edge of edge section = lower edge of finished ceiling.
 Screw spacing for attachment of edge section: max. 300mm c/c
 Light sockets of up to 3.0 kg can be integrated directly into 600x600 mm ceiling tiles. In the case of
600x1200 mm ceiling tiles or heavier fittings, loads must be taken up directly by the concrete deck or
via the grid system and extra hangers.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.45
0.60
0.70
0.65
0.60
0.45
αw: 0.60
Light reflection in accordance with DIN 5036:
75.1 %
Interior climate:
Degasification: 10 days
Particle emission: Low
PRODUCT:
Demountable acoustic ceiling in visible grid system
with round 6 mm holes, c/c 15 mm
MATERIAL
Material:
Perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 9.5 mm OR
600 x 1200 x 9.5 mm OR
600 x 600 x 12.5 mm OR
600 x 1200 x 12.5 mm
Edge:
A, visible grid system
Perforation: Round 6 mm holes, c/c 15 mm
Perforation percent:
10.2 %
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Visible grid system
 Distance between load-bearing sections c/c 1200 / 600 mm.
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger ≤ 400 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Location of edge section: Lower edge of edge section = lower edge of finished ceiling.
 Screw spacing for attachment of edge section: max. 300mm c/c
 Light sockets of up to 3.0 kg can be integrated directly into 600x600 mm ceiling tiles. In the case of
600x1200 mm ceiling tiles or heavier fittings, loads must be taken up directly by the concrete deck or
via the grid system and extra hangers.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.45
0.65
0.80
0.65
0.55
0.45
αw: 0.60
Light reflection in accordance with DIN 5036:
72.8 %
Interior climate:
Degasification: 10 days
Particle emission: Low
PRODUCT:
Demountable acoustic ceiling in visible grid system without perforation
MATERIAL
Material:
Non-perforated plasterboard
Board type: Ceiling tile
Length x width x thickness:
600 x 600 x 9.5 mm OR
600 x 1200 x 9.5 mm OR
600 x 600 x 12.5 mm OR
600 x 1200 x 12.5 mm
Edge:
A, visible grid system
Perforation: None
Surface:
Water-based acrylic paint
Colour:
White NCS 0701 Y24R, RAL 9003; gloss 5
Attachment: 15 mm OR 24 mm T-grid system
Edge section:
20x24 mm angled profile
15+15 x 8+25 mm cornice moulding
INSTALLATION
Suspension: Visible grid system
 Distance between load-bearing sections c/c 1200 / 600 mm.
 Distance between hangers ≤ 1200 mm.
 Distance from wall to first hanger ≤ 400 mm.
 Distance from wall to first load-bearing section ≤ 600 mm.
 Sub-division executed with cross-sections length 1200 and 600 mm.
 Location of edge section: Lower edge of edge section = lower edge of finished ceiling.
 Screw spacing for attachment of edge section: max. 300mm c/c
 Light sockets of up to 3.0 kg can be integrated directly into 600x600 mm ceiling tiles. In the case of
600x1200 mm ceiling tiles or heavier fittings, loads must be taken up directly by the concrete deck or
via the grid system and extra hangers.
PROPERTIES
Fire rating: A2-s1,d0
Acoustics: 200 mm suspension, without mineral wool on reverse
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
0.40
0.20
0.10
0.05
0.05
0.05
αw: 0.10
Light reflection in accordance with DIN 5036:
82.6 %
Interior climate:
Degasification: 10 days
Particle emission: Low