DIVISION 10 00 00 Specialties
SECTION 10 10 00 Information Specialties
SECTION 10 14 00 Signage
Cornelius Prism Interior Signage
PART 1 GENERAL
1.1
SECTION INCLUDES
A.
1.2
1.3
1.4
REFERENCES
A.
American National Standards Institute (ANSI): ANSI A117.1 - Specifications for Making Buildings and
Facilities Accessible to and Usable by Physically Handicapped People.
B.
Architectural and Transportation Barriers Compliance Board (ATBCB): Americans with Disabilities Act
Accessibility Guidelines for Buildings and Facilities (ADAAG).
SUBMITTALS
A.
Manufacturer's ordering guides on each product to be used, including:
1.
Installation methods.
2.
Cleaning methods.
B.
Shop Drawings: Submit shop drawings for each sign type to be used, including:
1.
Show layout, profiles, and product components, including edge conditions, accessories, finish
colors, and textures.
2.
Show sign mounting types, heights, anchorage methods, and attachment devices.
C.
Verification Samples: For each finish product specified, two 4” x 4” size signs representing actual
product, color, and patterns.
D.
Sign Schedule: Use same designations indicated on Drawings.
QUALITY ASSURANCE
A.
1.5
1.6
Interior Signage
Regulatory Requirements: Signage shall comply with applicable requirements of ADAAG and ANSI
A117.1
DELIVERY, STORAGE, AND HANDLING
A.
Store products in accordance with manufacturer's requirements.
B.
Store products in manufacturer's unopened packaging with labels intact until ready for installation.
C.
Store and dispose of solvent-based materials, and materials used with solvent-based materials, in
accordance with requirements of local authorities having jurisdiction.
PROJECT CONDITIONS
A.
Environmental Requirements: Maintain environmental conditions (temperature, humidity, and
Page 1 of 2 | Rev. 11.19.10
ventilation) within limits recommended by manufacturer for optimum results. Do not install products
under environmental conditions outside manufacturer's absolute limits.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURER
A.
Acceptable Manufacturer: Cornelius Signage; 30 Pine Street; Pittsburgh, PA 15223;Toll Free Tel: 800451-0410; Fax: 412-781-7840; Email: cornelius@forms-surfaces.com Web: www.corneliussignage.com
B.
Substitutions: Not permitted.
INTERIOR SIGNAGE
A.
Architectural Signage System: INOX as manufactured by Cornelius Signage
1.
Eco-Etch® faceplate: As selected from manufacturer’s full range of patterns / materials.
2.
Font: As provided by manufacturer.
3.
Font Color: As selected by Architect from manufacturer's full range of colors.
4.
Material: 3/8” 3030 Acrylic or Solid Wood from manufacturer’s full range of colors / stains.
5.
Tactile Lettering and Braille: Signage shall comply with applicable requirements of ADAAG and
ANSI
PART 3 EXECUTION
3.1
3.2
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory
preparation before proceeding.
PREPARATION
A.
3.3
3.4
INSTALLATION
A.
Install in accordance with manufacturer's instructions.
B.
Locate signs in accordance with ADAAG requirements.
C.
Install signs plumb and square.
PROTECTION
A.
3.5
Clean surfaces thoroughly prior to installation.
Protect installed products until completion of project.
SCHEDULES
A.
Refer to Signage Schedule as indicated.
Page 2 of 2 | Rev. 11.19.10