FGP SENSORS: French Leader specialised in Force, Torque, Acceleration,
Pressure, Instrumentation dedicated Sensors and Captors…Technical
assistance and support.
Worldwide French Leader in the sensor industry ranging from Force, Torque, Acceleration,
Pressure, and Instrumentation dedicated sensors and captors.
FGP Sensors offers wide range of products suitable for applications in the Automotive,
Aeronautics, Autosport, Offshore and Industrial sectors.
FGP Sensors provides technical assistance and support and is distinguished for manufacturing
custom-made sensors designed to meet any special requirements.
A. Force
A.1 General Purpose - Load ranges vary from 2 lbs. to 400,000 lbs. Both amplified and non-amplified
versions are available depending on the model.
FMT - Miniaturized
Load Washer
FSR from 0-4,000 lb to 0-64,000 lb
Compression
Static and dynamic applications
Measures clamping and screwing forces
Rugged
FN1010 - Pin for
Heavy Loads
FSR from 0-2,000 lb to 0-400,000 lb
Tension/Compression
High coefficient of security
Output: mV or V
Optional: Water-proof
FN2420 - Cylindrical
Load Cell for Very
Heavy Loads
Optional: Bidirectional
FSR from 0-4,000 lb to 0-1,000,000 lb
Compression
Accuracy: 0.1%
Spherical cap
Mounting holes on base
FN3000 - Pancake
Load Cell for Heavy
Loads
Output: mV or V
FSR from 0-2,000 lb to 0-200,000 lb
Tension/Compression
Accuracy: 0.1%
Output: mV or V
FN3002 - Heavy
Loads - Small
Dimensions
FSR from 0-2,000 lb to 0-400,000 lb
Tension/Compression
Threaded male mechanical fitting
Output: mV or V
Numerous Options
Full Scale Range (FSR) from 0-10 lb to 0-20,000 lb
FN3030 - General
Purpose S-beam Load
Tension/Compression
Cell
Accuracy: 0.1%
Output: mV or V
FN3050 - General
Purpose Low Profile
Load Cell
FSR from 0-20 lb to 0-4,000 lb
Tension/Compression
Accuracy: 0.1%
Output: mV or V
FN3148 - Very High
Accuracy Load Cell
Standard dimensions for all ranges
FSR from 0-2 lb to 0-400 lb
Tension/Compression
Accuracy: 0.05%
Integrated Mechanical Stops
FN3280 - S-beam
Load Cell for Low
Ranges
Output: mV or V
FSR from 0-0.2 lb to 0-1 lb
Tension/Compression
Accuracy: 0.1%
FN7110 - Double
Range Load Cell
Integrated mechanical stops
FSR from 0-0.2/0-20 lb to 0-200/0-2,000 lb
Tension/Compression
Accuracy: 0.1%
Rugged
Integrated mechanical stops
Output: mV or V
A.2 Miniature - Miniature load cells designed for testing where space and weight are critical. These rugged
sensors can measure loads as small as 0-0.4 lbs to as much as 0-2000 lbs in static and dynamic applications.
XFC200R - High Over Full Scale Range (FSR) from 0-0.4 lb to 0-2,000 lb
range
Compression
High stiffness
Small diameter
Static and dynamic applications
XFC200R-Vi - High
Performance
Compression
High Accuracy and Stability
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-0.4 lb to 0-2,000 lb
Compression
High Stiffness
XFC205R - Low
Ranges
Integrated Spherical Load Button
FSR from 0-0.4 lb to 0-40 lb
Compression
High stiffness
Diameter: 0.39" [10 mm]
Static and dynamic applications
XFL205R Subminiature Diameter 0.2" [5 mm]
M5 mounting stud
FSR from 0-0.4 lb to 0-20 lb
Compression
Thickness: 0.1" [2.5 mm]
Integrated spherical load button
Static and dynamic applications
XFL212R - Low
Profile - Diameter
0.5" [12.5 mm]
FSR from 0-1 lb to 0-100 lb
Compression
Thickness: 0.14" [3.5 mm]
Integrated spherical load button
Static and dynamic applications
XFL212R-Vi - High
Performance
Compression
High Accuracy and Stability
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-1 lb to 0-100 lb
Compression Extremely Flat
XFL225D - Low
Profile - Diameter
0.98" [25 mm]
FSR from 0-2 lb to 0-1,000 lb
Compression
Static and dynamic applications
Optional: Load washer model
XFL225D-Vi - High
Performance Load
Washer
High Accuracy and Stability
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-2 lb to 0-1,000 lb
Compression
Extremely Flat
Load Washer Model
XFTC300 - Low &
Medium Ranges Male/Male
Mechanical Fitting
FSR from 0-0.4 lb to 0-400 lb
Tension/Compression
Static and dynamic applications
Optional: High-level output with integrated amplifier
High overload capacity
High Accuracy and Stability
XFTC300-Vi - High
Performance
Temperature Range -40 to 120 °C [-40 to 248 °F]
Tension/Compression
High Level Analogue Output
Full Scale Ranges 0-0.4 lb to 0-400 lb
Tension/Compression
High Stiffness
Threaded Male Mechanical Fitting
XFTC301 - Medium
& High Ranges Male/Male
Mechanical Fitting
FSR from 0-100 lb to 0-2,000 lb
Tension/Compression
High stiffness
Static and dynamic applications
High Accuracy and Stability
XFTC301-Vi - High
Performance
Temperature Range -40 to 120 °C [-40 to 248 °F]
Tension/Compression
High Level Analogue Output
Full Scale Ranges 0-100 lb to 0-2,000 lb
Tension/Compression
High Stiffness
Threaded Male Mechanical Fitting
XFTC302 - For Heavy
Loads - High
Temperature
FSR from 0-1,000 lb to 0-2,000 lb
Tension/Compression
High stiffness
Static and dynamic applications
Male mechanical fitting
XFTC310 - Low &
Medium Ranges Male/Female
Mechanical Fitting
FSR from 0-0.4 lb to 0-400 lb
Tension/Compression
Static and dynamic applications
High overload capacity
Optional: High-level output with integrated amplifier
XFTC311 - Medium
& High Ranges -
FSR from 0-100 lb to 0-2,000 lb
Male/Female
Mechanical Fitting
Tension/Compression
High stiffness
Static and dynamic applications
XFTC320 - Low &
Medium Ranges Female/Female
Mechanical Fitting
FSR from 0-0.4 lb to 0-400 lb
Tension/Compression
Static and dynamic applications
High overload capacity
Optional: High-level output with integrated amplifier
XFTC321 - Medium
& High Ranges Female/Female
Mechanical Fitting
FSR from 0-100 lb to 0-2,000 lb
Tension/Compression
High stiffness
Static and dynamic applications
XFTC322 - For Heavy
Loads - Threaded
Female Mechanical
Fitting
FSR from 0-1,000 lb to 0-2,000 lb
Tension/Compression
High stiffness
Static and dynamic applications
High temperature ranges
XFU400 - Integrated
Bearings
FSR from 0-100 lb to 0-1,000 lb
Tension/Compression / High accuracy
Static and dynamic applications
A.3 Process / Industry - ideal for measuring strain during assembly. These sensors measure compression and
have load ranges from 20 lbs. to 11,200 lbs. (100 N to 50 kN) and are protected against accidental overloads.
FN2640 - Press-fit
Load Cell
Full Scale Range (FSR) from 0-20 lb to 0-10,000 lb
Compression
For static and dynamic applications
With spherical load button
High stiffness
FN9040 - Miniature
Press-Fit Load Cell
FSR from 0-200 lb to 0-20,000 lb
Compression with spherical load button
High natural frequency > 20 kHz
A.4 Fatigue rated load cell and Multiaxial Sensors - fatigue rated load cells engineered for fatigue
testing. These rugged sensors have a high stiffness with a fatigue life of millions of cycles; while multiaxial
sensor measures force on three axes as well as the three corresponding moments.
FN3042 - Pancake
Load Cell - High
Ranges
FSR from 0-1,000 lb to 0-100,000 lb
Tension/Compression
High stiffness (millions of cycles)
Identical performance to static sensors
Dynamic applications
Output: mV or V
FN3060 - S-beam
Load Cell - Fatigue
Testing
Full Scale Range (FSR) from 0-50 lb to 0-500 lb
Tension/Compression
High accuracy
Very high stiffness
Dynamic applications
Output: mV or V
FN7325 - Multi-axial
load cell
FSR from 0-1,000 lb to 0-50,000 lb
Measures tri-directional stress
Multiple components mode
Minimal cross effects
Optional high-level output
B. Torque
B.1 Rotary Torque Sensors - Our rotary torque sensors are protected against the effects of high intensity
electromagnetic fields and are ideal for testing rotation speeds up to 37,000 rpm.
CD1050 - Square
Male Coupling
FSR from 0-4 lb-ft to 0-5600 lb-ft
Static and dynamic applications
Square male couplings
Output: mV or V
CD1095 - Keyed Shaft FSR from 0-4 lb-ft to 0-2,000 lb-ft
Mechanical
Static and dynamic applications
Connection
3,000 rpm max.
Output: mV or V
CD1110 - Low Speed
Torque
Measurements
FSR from 0-0.04 lb-ft to 0-1.6 lb-ft
Static and dynamic applications
2,000 rpm
Integrated mechanical stops
Output: mV or V
CD1140 - Contact less
Full Scale Range (FSR) from 0-0.04 lb-ft to 0-16,000 lb-ft
High accuracy
Small outline
Low moment of inertia
Speed or Angle Detection (Optional)
B.2 Reaction Torque Sensors - High accuracy non-rotation reaction torque sensors use metal foil strain gauges to minimize the effects of
high temperature on data.
CS1060 - Square Male
Mechanical
Connection
FSR from 0-4 lb-ft to 0-5,600 lb-ft
Static and dynamic applications
Output: mV or V
CS1120 - Keyed Shaft
Mechanical
Connection
Full Scale Range (FSR) 0-4 lb-ft to 0-2,000 lb-ft
Static and dynamic applications
Keyed shaft mechanical connection
Optional high-level output (depending on FSR)
CS1210 - End Shield
Mechanical Fittings
FSR from 0-128 lb-ft to 0-8,000 lb-ft
Static and dynamic applications
High transverse stiffness
Output: mV or V
B.3 Multifunctional sensors – Sensors that also measure angle and/or speed of rotation in addition to
Torque.
FCA7330 -
Full Scale Range (FSR) of 0-20 Nm to 0-2,500 Nm
Torque/Angle/Speed
Sensor
Static and dynamic applications
Keyed shaft mechanical fitting
FCB7013 - Double
Angle detection
Double range of 0-200 lb-ft and 0-4,000 lb-ft
Range Reaction
Torque Sensor
Integrated mechanical stops for the low FSR
FNC7201 - Force &
FSR of 0-14,000 lb and 0-175 lb-ft
Torque Sensor
Static and dynamic applications
FNC7224 - Force &
FSR of 0-12,000 lb and 0-40 lb-ft
Torque Sensor
High accuracy
C. Acceleration
C.1 Industrial testing - lightweight accelerometers are ideal for continuous measurements of acceleration,
shock, and low frequency vibration. Built-in critical air damping and mechanical stops provide excellent over
range protection with minimal changes in damping as a function of temperature.
FA101 - General
Purpose
Full Scale Range (FSR) from ±2g to ±500g
Bandwidth from DC
Air damped
Integrated mechanical stops
Individual frequency response data sheet
Low cost
FA108 - Light
FSR from ±2g to ±500g
Weight - Mounting
Bracket
Temperature compensated
Weight without cable: 6 grams
Bandwidth from DC
Air damped
Integrated mechanical stops
Individual frequency response data sheet
FA1101-A9 -
FSR from ±2g to ±500g
Differential Output
Rugged
Bandwidth from DC
Over-range stops
High level differential output available
FA1403 - High Level FSR from ±2g à ±500g
Output
Bandwidth from DC
Over-range stops
High level output
23 mm [0.906"] cube design
Triaxial model available
XA1520 - Industrial,
FSR from ±5g to ±2000g
High level output
Industrial, damped
Dynamic and steady state response
Stops prevent over-ranging up to 10 000g
High level output model
20 mm cube design
C.2 Miniature - miniature size and lightweight of our accelerometers allow testing where space and weight are
often critical. Built-in critical air damping and mechanical stops provide excellent over-range protection with
minimal changes in damping as a function of temperature. Amplified versions are available for certain models.
FA1105 - Light
Weight - M5 Thread
FSR from ±2g to ±500g
Small footprint
Lightweight and rugged: <8 grams
Bandwidth from DC
Over-range stops
M5 Thread for easy mounting
Built-in amplifier
FA1131 - Extreme
FSR from ±50g to ±500g
small footprint
Extremely small footprint
Weighs less than 3 grams
Bandwidth from DC
Built-in critical air damping
Solid state reliability
FA1144 - Built-in
amplifier available
FSR from ±50g to ±500g
20x20 mm [0.79"] cube
Bandwith from DC
Air damped
Integrated mechanical stops
High phase shift stability
Built-in amplifier available
FA1320 - Crash
FSR from ±50g to ±500g
studies
Crash studies
Bandwidth from DC
Built-in critical air damping
Compact and rugged design
Solid state reliability
XA1000 - Ultra-
FSR from ±5g to ±2000g
Miniature
Ultra-Miniature, damped
Dynamic and steady state response
Weight 1 gram
Stops prevent over-ranging up to 10 000g
XA1010 - Sub-
FSR from ±5g to ±2000g
Miniature
Sub-Miniature, damped
Dynamic and steady state response
Weight 1.5 grams
Stops prevent over-ranging up to 10 000g
XA1020 – Miniature
FSR from ±5g to ±2000g
Miniature, damped
Dynamic and steady state response
Weight 4 grams
Stops prevent over-ranging up to 10 000g
XA1299 - Crash-test
FSR from ±50g to ±3000g
Accelerometer
Miniature, damped
Ideal for Crash-Testing
Bandwidth from DC
Weight ~5 grams
Over-range stops / Meets ISO 6487
XA1516 - Miniature,
FSR from ±5g to ±2000g
High level output
Miniature, damped
Dynamic and steady state response
Stops prevent over-ranging up to 10 000g
High level output model
16 mm cube design
C.3 Multiaxial - Accelerometers designed to measure simultaneously two or three axes with a different range
in each. Built-in critical air damping and mechanical stops provide excellent over-range protection with minimal
changes in damping as a function of temperature.
FA3106 - Triaxial General Purpose
Full Scale Range (FSR) from ±2g to ±500g
Bandwith from DC
Air damped
Integrated mechanical stops
FA3403 - Triaxial -
FSR from ±2g to ±500g
Differential output
Selectable operating range for each axis
Weighs <30 grams
Bandwidth from DC
Integrated mechanical stops
High level differential output available
FA3650 - Triaxial -
FSR from ±50g to ±500g
Cube design
Selectable operating range for each axis
25 x 25 mm [0.98"] cube design
Bandwidth from DC
Built-in critical air damping
Integrated over-range stops
D Pressure Miniature - Installation tightening torque effects are one of the most common causes of pressure
sensor failure. In response, FGPSensors has developed SanShift™ Technology. By allowing up to 10 times the
additional installation torque, SanShift™ Technology provides immediate long-term performance improvements.
Models are available in titanium to withstand severe testing environments and with a flush diaphragm to prevent
pressure port obstruction.
XPCM10 - High
FSR from 0-150 psi to 0-5,000 psi
Temperature, M10
mounting stud
Operating temperature up to 428 °F
Insensitive to tightening torque
For static and dynamic applications
XPM10 - High
FSR from 0-15 psi to 0-5,000 psi
Accuracy, M10
mounting stud
Accurate to ±0,15%
Insensitive to tightening torque
High natural frequency
XPM10-Vi - High
High Accuracy and Stability
Performance, M10
mounting stud
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-15 psi to 0-5,000 psi
Flush Diaphragm, All-Titanium
Low Installation Torque Sensitivity
M10 Threading
XPM4 - All
Full Scale Range(FSR) from 0-75psi to 0-3000psi
Titanium, M4
mounting stud
All titanium construction &
Insensitive to tightening torque
High natural frequency
XPM4-Vi - High
High Accuracy and Stability
Performance, M4
mounting stud
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-75 psi to 0-3,000 psi
Flush Diaphragm, All-Titanium
Low Installation Torque Sensitivity
XPM5 - All
FSR from 0-30 psi to 0-5,000 psi
Titanium, M5
mounting stud
All titanium construction
Insensitive to tightening torque
High natural frequency
XPM5-Vi - High
High Accuracy and Stability
Performance, M5
mounting stud
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-30 psi to 0-5,000 psi
Flush Diaphragm, All-Titanium
Low Installation Torque Sensitivity
M5 Threading
XPM6 - High
FSR from 0-1,500 psi to 0-15,000 psi
Pressure, M6
mounting stud
Suited for harsh environments
Flash temperature proved
Insensitive to tightening torque
XPM6-Vi - High
High Accuracy and Stability
Performance, M6
mounting stud
Temperature Range -40 to 120 °C [-40 to 248 °F]
High Level Analogue Output
Full Scale Ranges 0-1,500 psi to 0-15,000 psi
Flush Diaphragm, All-Titanium
Low Installation Torque Sensitivity
M6 Threading
XPR30 - Highly
FSR from 0-75 psi to 0-1,500 psi
media compatible, 9
mm length
All titanium construction
0.12" [3 mm] diameter
High natural frequency
XPR36 - Highly
FSR from 0-30 psi to 0-1,500 psi
media compatible, 10
mm length
All titanium construction
0.14" [3.6 mm] diameter
High natural frequency
E. Instrumentation
E.1 Amplifiers
ARD150/151 - DIN
Rail Amplifier
Suited for Wheatstone bridge sensors
Amplified current output 0/4...20 mA or
Analogue output ±10 V
DIN TS35 Rail Compatible
BE305 - In-Line
Amplifies Wheatstone bridge sensors
Current Amplifier
Power supply 12 to 36 Vdc
Currrent output 4...20 mA (current loop)
Zero and gain adjustments by trimmers
Connector or cable output
XAM - In-Line
Voltage Amplifier
Suited for Wheatstone bridge sensors
Unipolar or Bipolar Supply/ Output
Zero adjust potentiometer
Gain adjust trimmer
Connector and / or sealed cable output
XAM-IC - In-Line
Suited for Wheatstone bridge sensors
Current Amplifier
Power Supply 10 to 36 V
Zero and gain adjustments by trimmers
Connector and / or sealed cable output
XAM420 - In-Line
In-Line amplifier in aluminium case
Voltage Amplifier
Power supply 12 to 36 Vdc
Current output 4...20 mA (current loop)
Zero and gain adjust trimmers
Connector and / or sealed cable output
E.2 Signal Conditioning / Meters
Alpha-C -
Suited for strain gauge type sensors
Programmable
conditioner/displayer
Compact housing
Front panel programming
4 input ranges
Signal filtering
Optional RS232
M210 - Multiple
Analog output of ±10 V
entry
conditioner/displayer
Red LED Display: LED 2,000 counts
High bandwidth
Low noise Level
MMP210 - Multiple
Display LED 5,000 points / Analog output of ±10V
entry conditioner
displayer, fast
response
High bandwidth / Low noise
TARE function and positive Peak function
RS232/RS485 interface (4 wires)
FGP Sensors also offers its Clients custom-made sensors uniquely designed, tested and
manufactured for special application. The engineers at FGP Sensors are actively involved in all
stages of the projects, offering quick responses to any clarification or problem the Clients might
encounter.
FGP Sensors maintains a large stock of all products and efficiently ship our products to
worldwide destinations.