Speed MAC ALU Video ALU Bit shift RISC Ball Grid Array BF531 Family 600MHz Two 16-bit MACs two 40-bit ALUs, four 8-bit video ALUs, 40-bit shifter RISC-like register and instruction model for ease of programming and compiler-friendly support Advanced debug trace, and performance monitoring 160-ball CSP_BGA, 169-ball PBGA, and 176-lead LQFP Parallel peripheral interface PPI/GPIO, supporting ITU-R 656 video data formats Two dual-channel, full duplex synchronous serial ports, GPIO MEMORY supporting eight stereo I2S channels Four memory-to-memory DMAs Eight peripheral DMAs SPIcompatible port 6 general-purpose I/O pins (GPIO) UART with Event handler Debug/JTAG interface 148K bytes of on-chip memory 16K bytes of instruction SRAM/Cache Up to 64K bytes of instruction SRAM Up to32K bytes of data SRAM/Cache Up to32K bytes of data SRAM 4K bytes of scratchpad SRAM External memory controller support for SDRAM, SRAM, flash, and ROM Flexible SPI and external memory BF537 Family 500MHz Two 16-bit MACs two 40-bit ALUs four 8-bit video ALUs 40-bit shifter RISC-like register and instruction model for ease of programming and compiler-friendly support Advanced debug, trace, and performance monitoring 182-ball and 208-ball MBGA packages IEEE 802.3-compliant 10/100 Ethernet MAC Controller area network (CAN) 2.0B (PPI) interface 12 peripheral DMAs Event handler with 32 interrupt inputs (SPI)-compatible Two UARTs, Two-wire interface (TWI) controller, Eight 32-bit timer/counters and watchdog timer 32-bit core timer 48 general-purpose I/Os (GPIOs), 132K bytes of on-chip memory comprised of: Instruction SRAM/cache; instruction SRAM; data SRAM/cache; additional dedicated data SRAM; External memory controller with glueless support for SDRAM and asynchronous 8-bit and 16-bit memories Flexible booting options from external flash, SPI and TWI memory or from SPI, TWI, and UART host devices ADSP-BF533 Ez Kit Lite 64 MB (32M 3 16-bit) SDRAM 2 MB (512k 3 16-bit 3 2) flash memory AD1836 96 kHz audio codec with 4 input and 6 output RCA jacks ADV7183 video decoder with 3 input RCA jacks ADV7171 video encoder with 3 output RCA jacks ADM3202 RS-232 line driver/receiver DB9 male connector USB-based debugger interface JTAG ICE 14-pin header SPI connector SPORT1 connector Background telemetry channel Evaluation suite of VisualDSP++ 10 LEDs: 1 power, 1 board reset, 1 USB reset, 1 USB monitor, 6 general purpose 5 push-buttons with debounce logic: 1 reset, 4 programmable flag Three 90-pin connectors providing PPI, SPI, EBIU Timers 0-2, UART, programmable flags, SPORT0, and SPORT1 expansion interfaces for analyzing and interfacing CE-certified ADSP-BF537 Ez Kit Lite Max core clock rate 600 MHz 64 MB (32M 3 16) SDRAM 4 MB (2M 3 16) flash memory SMSC LAN83C185 10/100 PHY with RJ45 connector CAN TJA1041 transceiver with two modular connectors AD1871 96 kHz stereo DAC with 3.5 mm jack connector AD1854 96 kHz stereo ADC with 3.5 mm jack connector RS-232 UART line driver/receiver National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) interface Advanced USB-based debugger interface JTAG ICE 14-pin header Evaluation suite of VisualDSP++ development tools Flash utility for writing application boot code and data to flash 6 general-purpose LEDs, 4 general purpose push buttons Expansion board interface cluster for evaluating and interfacing with the PPI interfaces Discrete IDC expansion ports for all processor peripherals CE-certified