Standard Features
Processor

M840i – Intel® Pentium® II Xeon TM 450MHz/512KB CPU

M850 i
– Intel Pentium II Xeon 450MHz/1MB CPU

M860i – Intel Pentium II Xeon 450MHz/2MB CPU

M870i – Intel Pentium III Xeon 500MHz/512KB CPU

M880 i – Intel Pentium III Xeon 500MHz/1MB CPU

M890i – Intel Pentium III Xeon 500MHz/2MB CPU

Integral ECC L2 cache

Upgradeable to 4-way operation
 100MHz system bus
Memory

8GB 50ns ECC EDO buffered (maximum)
Input-Output Bus Architecture

5 dedicated 64-bit PCI slots

5 dedicated 32-bit PCI slots (one occupied)
 1 shared 32-bit PCI/ISA slot
Network Controller

Intel Pro/100 + Server Adapter Card
Input-Output Subsystems

2940UW Single Channel SCSI Controller (optional)

I
2
O-ready architecture
RAID
 Mylex 3V Dual Channel SCSI RAID Controller (optional)
Input-Output Ports

2 x 9-pin serial (COM) ports

1 x parallel (LPT) port. Supports standard and bi-directional
operation (SPP, EPP, ECP)
 1 x USB Port

PS/2 mouse and keyboard ports
Storage Bays
 5 x 5¼ " format externally accessible device bays
(1 occupied with a CD-ROM drive, 1 occupied by FDD)
 Maximum storage (hot swap capable):
- 6 x 18GB 1.6" HDD in base system
- 8 x 18GB 1.6" HDD in optional disk node giving a total
of 252GB
Graphics as Standard

Cirrus Logic CL-GD5446 graphics controller
 2MB Video RAM
Hardware Options
All options separately orderable and configurable when available:

4, 9 and 18GB 7200rpm LVD-capable SCSI SCA HDDs

9 and 18GB 10000rpm LVD-capable SCSI SCA HDDs
 256, 512 and 1024MB ECC EDO upgrades (buffered DIMMs in
banks of 4 i.e. 256MB = 4 x 64MB)

8GB* DDS2 DAT (internal)

24GB* DDS3 DAT (internal)
 120GB* DDS3 DAT Stacker (external)

8GB* SLR5 (internal)

40GB* DLT 4000 (internal and external)
 70GB* DLT 7000 (external)
* indicates compression ratio of 2:1
 2940UW Single Channel SCSI Controller

Mylex DAC960PG 3V Dual Channel SCSI RAID Controller

UPSs with driver software
 V.24 synchronous communications controller
 Asynchronous host adapter with 4 and 8 x RS-232/423 port
adapter options and High Connectivity (RIO) asynchronous host
adapter

Hot-swap power supplies and fans. Three PSUs fitted as
standard; hot-swap capability with a fourth (redundant) unit.
Server Management
 Servermanager SNMP-based suite

DMI-compliant BIOS
Security

Lockable internal access (front and rear), BIOS-controlled
password access to system, discs and exchangeables
Operating System Support
 Windows NT® Server 4.0 (with full approvals and certification)
 SCO® UnixWare TM
7 (with full approvals and certification)

Citrix Winframe 1.7
Approvals
 Safety: IEC 950 Amendment 4 (CB report obtained) and national variants:
EN60950 Amendment 4: 1995, for EU directive
73/23/EEC (includes the requirements for European
Telecom safety) European UL 1950 Edition 3: 1995 US


NEMKO-TSE(74-SEC)207/94 Norwegian EMC: EN50081-1 calling up EN 55022 Class A European Radiated EN50082-1 calling up EN61000-4-2,3,4,5,6,11 for EU directive 89/336/EEC
European Immunity VCCI Class 1 Japanese EMC FCC Pt. 15 subpart B, class A US EMC
Marks applied at Release: CE, FCC
Marks applied for GS, N, NRTL/C
Operating Conditions

Ambient temperature:
10 –35 o C operating; -10 –60 o C non-operating

Humidity: 20-80% non-condensing
 Noise: < 50dB bystander sound pressure

Mains input: 100-120V, 200-240V, 50-60Hz, 1200W (max)
Dimensions and Weight

HeightxWidthxDepth: 700x500x800mm
 Weight: 150kg (total: system, disk node and cabinet)
Standard Warranty

Check with Fujitsu Computers Limited or your supplier for local details
Server Configurations

M840 i : 450MHz/512KB Cache PII Xeon, 0/256MB RAM,
no HDD, no Disk Node as standard

M850 i : 450MHz/1MB Cache PII Xeon, 0/256MB RAM,
no HDD, no Disk Node as standard

M860 i : 450MHz/2MB Cache PII Xeon, 0/256MB RAM,
no HDD, no Disk Node as standard

M870 i : 500MHz/512KB Cache PIII Xeon, 0/256MB RAM,
no HDD, no Disk Node as standard

M880 i : 500MHz/1MB Cache PIII Xeon, 0/256MB RAM,
no HDD, no Disk Node as standard

M890 i : 500MHz/2MB Cache PIII Xeon, 0/256MB RAM,
no HDD, no Disk Node as standard
PS-TS-0010 Issue: 6
Fujitsu Computers Limited endeavours to ensure that the information in this document is correct and fairly stated, but does not accept liability for any error or omission. The development of products and services of Fujitsu Computers Ltd is continuous and published information may not be up to date. It is important to check the current position with Fujitsu Computers Limited.
No employee of Fujitsu Computers Limited is authorised to make any representation or warranty in respect of Fujitsu Computers
Limited products. This document is not part of a contract or licence with Fujitsu Computers Limited save insofar as it is contained in a written contract or licence signed on behalf of Fujitsu Computers Limited by an authorised officer.
Pentium is a registered trademark and MMX is a trademark of Intel Corporation. Microsoft, Windows NT and Windows 95 are registered trademarks of Microsoft Corporation in the United States and in other countries. Fujitsu is a registered trademark of Fujitsu
Ltd.
© Jun 1999 Fujitsu Computers Limited trading as Fujitsu Siemens Computers
Registered in England No 3197497 Registered office: Lovelace Road, Bracknell, Berkshire RG12 8SN, England
Date: 21 Jun 1999